----- Original Message -----

From: Albert Cutolo

To: main@jfw.groups.io

Sent: Tuesday, September 21, 2021 11:51 AM

Subject: How do I turn on the BCC field in outlook.

Good afternoon everyone, 

 

How would I go about turning on the BCC field using Outlook? I’m running windows 10 office 365, and outlook.

 

Thanks in advance, 

 

Al   I’m not sure just what version of outlook that I’m using, but its with office 365  

Good afternoon everyone, 

How would I go about turning on the BCC field using Outlook? I’m running windows 10 office 365, and outlook.

Thanks in advance, 

Al   I’m not sure just what version of outlook that I’m using, but its with office 365  

I found another way.

After opening a new message with control n.

Hit alt and arrow right to past help.  A edit box will open.

Type in add bcc field and hit enter.

HTH,

John Doering
Pricing Analyst

Office: 4147783040 Extn:4063
Mobile:
445 S Curtis Rd West Allis, WI 53214
https://ibvi.org

Industries for the Blind & Visually Impaired accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

Good afternoon everyone, 

How would I go about turning on the BCC field using Outlook? I’m running windows 10 office 365, and outlook.

Thanks in advance, 

Al   I’m not sure just what version of outlook that I’m using, but its with office 365  

I found another way.

After opening a new message with control n.

Hit alt and arrow right to past help.  A edit box will open.

Type in add bcc field and hit enter.

HTH,

John Doering
Pricing Analyst

Office: 4147783040 Extn:4063
Mobile:
445 S Curtis Rd West Allis, WI 53214
https://ibvi.org

Industries for the Blind & Visually Impaired accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

Good afternoon everyone, 

How would I go about turning on the BCC field using Outlook? I’m running windows 10 office 365, and outlook.

Thanks in advance, 

Al   I’m not sure just what version of outlook that I’m using, but its with office 365  

Good evening John, 

When I tried performing the suggestion you provided,  When I go into doing a control N key too open a new message and do  an alt right arrow  my cursor doesn’t move too any of those options or fields.

I do appreciate that you tried too help  me.

I found another way.

After opening a new message with control n.

Hit alt and arrow right to past help.  A edit box will open.

Type in add bcc field and hit enter.

HTH,

John Doering
Pricing Analyst

Office: 4147783040 Extn:4063
Mobile:
445 S Curtis Rd West Allis, WI 53214
https://ibvi.org

Industries for the Blind & Visually Impaired accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

Good afternoon everyone, 

How would I go about turning on the BCC field using Outlook? I’m running windows 10 office 365, and outlook.

Thanks in advance, 

Al   I’m not sure just what version of outlook that I’m using, but its with office 365  

Hi, Albert. Try this instead, to cause the BCC field to be shown,

1. Open Outlook.

2. Open a new message which you would send to someone.

3. Press ALT plus the letter P, followed by the letter B.

4. Close the message you were going to send without sending it.

5. Open a new message to send to someone, and navigate through the to, CC and Subject fields.

6. Just before the Subject field, do you now see a BCC field? If so, it's fixed, and it will always show, until you reverse the action with ALT plus P, followed by B again.

Good evening John, 

When I tried performing the suggestion you provided,  When I go into doing a control N key too open a new message and do  an alt right arrow  my cursor doesn’t move too any of those options or fields.

I do appreciate that you tried too help  me.

I found another way.

After opening a new message with control n.

Hit alt and arrow right to past help.  A edit box will open.

Type in add bcc field and hit enter.

HTH,

John Doering
Pricing Analyst

Office: 4147783040 Extn:4063
Mobile:
445 S Curtis Rd West Allis, WI 53214
https://ibvi.org

Industries for the Blind & Visually Impaired accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

Good afternoon everyone, 

How would I go about turning on the BCC field using Outlook? I’m running windows 10 office 365, and outlook.

Thanks in advance, 

Al   I’m not sure just what version of outlook that I’m using, but its with office 365  

Hi, Albert. Try this instead, to cause the BCC field to be shown,

1. Open Outlook.

2. Open a new message which you would send to someone.

3. Press ALT plus the letter P, followed by the letter B.

4. Close the message you were going to send without sending it.

5. Open a new message to send to someone, and navigate through the to, CC and Subject fields.

6. Just before the Subject field, do you now see a BCC field? If so, it's fixed, and it will always show, until you reverse the action with ALT plus P, followed by B again.

Good evening John, 

When I tried performing the suggestion you provided,  When I go into doing a control N key too open a new message and do  an alt right arrow  my cursor doesn’t move too any of those options or fields.

I do appreciate that you tried too help  me.

I found another way.

After opening a new message with control n.

Hit alt and arrow right to past help.  A edit box will open.

Type in add bcc field and hit enter.

HTH,

John Doering
Pricing Analyst

Office: 4147783040 Extn:4063
Mobile:
445 S Curtis Rd West Allis, WI 53214
https://ibvi.org

Industries for the Blind & Visually Impaired accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

Good afternoon everyone, 

How would I go about turning on the BCC field using Outlook? I’m running windows 10 office 365, and outlook.

Thanks in advance, 

Al   I’m not sure just what version of outlook that I’m using, but its with office 365  

Hey there Bill and Albert, Brian Zolo here in Gahanna, Ohio.  Bill, I just tried this sequence and still don’t see the bcc field when I open a new message.  BZ!

Hi, Albert. Try this instead, to cause the BCC field to be shown,

1. Open Outlook.

2. Open a new message which you would send to someone.

3. Press ALT plus the letter P, followed by the letter B.

4. Close the message you were going to send without sending it.

5. Open a new message to send to someone, and navigate through the to, CC and Subject fields.

6. Just before the Subject field, do you now see a BCC field? If so, it's fixed, and it will always show, until you reverse the action with ALT plus P, followed by B again.

Good evening John, 

When I tried performing the suggestion you provided,  When I go into doing a control N key too open a new message and do  an alt right arrow  my cursor doesn’t move too any of those options or fields.

I do appreciate that you tried too help  me.

I found another way.

After opening a new message with control n.

Hit alt and arrow right to past help.  A edit box will open.

Type in add bcc field and hit enter.

HTH,

John Doering
Pricing Analyst

Office: 4147783040 Extn:4063
Mobile:
445 S Curtis Rd West Allis, WI 53214
https://ibvi.org

Industries for the Blind & Visually Impaired accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

Good afternoon everyone, 

How would I go about turning on the BCC field using Outlook? I’m running windows 10 office 365, and outlook.

Thanks in advance, 

Al   I’m not sure just what version of outlook that I’m using, but its with office 365  

I think the easiest way is to use, Alt+p  followed by B, from within a new message.

Using this the change is immediate in the new message.

If you are still not able to see a BCC field when tabbing through the to & past the CC fields, do this.

Open a new message use, Alt+P, nowArrowLeft until you hear BCC field, checked means it is showing. pressing enter here will check or uncheck the BCC option.

Hey there Bill and Albert, Brian Zolo here in Gahanna, Ohio.  Bill, I just tried this sequence and still don’t see the bcc field when I open a new message.  BZ!

Hi, Albert. Try this instead, to cause the BCC field to be shown,

1. Open Outlook.

2. Open a new message which you would send to someone.

3. Press ALT plus the letter P, followed by the letter B.

4. Close the message you were going to send without sending it.

5. Open a new message to send to someone, and navigate through the to, CC and Subject fields.

6. Just before the Subject field, do you now see a BCC field? If so, it's fixed, and it will always show, until you reverse the action with ALT plus P, followed by B again.

Good evening John, 

When I tried performing the suggestion you provided,  When I go into doing a control N key too open a new message and do  an alt right arrow  my cursor doesn’t move too any of those options or fields.

I do appreciate that you tried too help  me.

I found another way.

After opening a new message with control n.

Hit alt and arrow right to past help.  A edit box will open.

Type in add bcc field and hit enter.

HTH,

John Doering
Pricing Analyst

Office: 4147783040 Extn:4063
Mobile:
445 S Curtis Rd West Allis, WI 53214
https://ibvi.org

Industries for the Blind & Visually Impaired accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

Good afternoon everyone, 

How would I go about turning on the BCC field using Outlook? I’m running windows 10 office 365, and outlook.

Thanks in advance, 

Al   I’m not sure just what version of outlook that I’m using, but its with office 365