moderated JAWSnot reading lines of text with dates in them in WORD and email


Udo Egner-Walter
 

Hi Marty, 

to find out if Vocalizer Expressive causes this issue you can temporarily change the voice by pressing JAWS+Control+S. Select another voice, for example Eloquence then test this and turn back your preferred voice. 

To find out the setting causes this issue you could either open Quick Settings by pressing JAWS+V or Settings Center by pressing JAWS+6. In the tree view you can scroll down to the last branch. The last branch displays the settings you changed last. Make sure you try out both: the app setting file in which your problem exists (for example word or outlook) and the default file. You can open the default file by pressing Control+Shift+D if the Settings Center or Quick Settings dialog is open. 

The next step if this don't is successful depends on the time you want to invest to solve the problem as well your experience in computing for example to open text file and delete single lines. If time matters you could delete the settings file after backup the file. If you want to try out some things and perhaps if you have made a lot of settings you don't remember you could manually delete settings by opening the file in a text editor. Let me know if you want one of the suggestions giving a try and I can write more details here. 

Good luck
Udo 


Am 16.06.2021 um 22:03 schrieb Marty Hutchings <mhutchings152730@...>:

OK, JAWS reads my document perfectly with the alternative default mode on.  How do I figure out which setting is causing the problem?  I am using Vocalizer Expressive voice.  Could this be causing this?

On 6/16/2021 12:25 AM, Udo Egner-Walter via groups.io wrote:
Hi Marty, 

To find out if a JAWS setting is responsible for such a behavior you could activate the alternative User by pressing JAWS+Space, then Z. This temporarily turns off your settings to check if a setting is responsible for this. To go back to your normal user settings press the hot key again (JAWS+Space, Z). 

If no setting entry causes this issue you could provide such a file with a cloud device so one can have a closer look at this. 

Udo 

Am 16.06.2021 um 07:47 schrieb Marty Hutchings <mhutchings152730@...>:

I have very few JAWS dictionary entries and I am sure that that is not one of them.  I don't know if this group allows attachments to messages, but I will try to attach a document with examples.  See if your system reads correctly.

On 6/15/2021 9:42 PM, Glenn / Lenny wrote:

I think reading word by word will not use a dictionary entry.
Might you have a dictionary entry that is making it speak nothing for that?
Glenn
----- Original Message ----- 
Sent: Tuesday, June 15, 2021 10:37 PM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Can you post an example of an email where it happens? For the record, on my system, it isn’t happening with the date in this message.
 
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email
 
Hello,  I posted this question a while ago and this is still happening.  I will type a line of text in a WORD document with a date such as "Saturday, August 14".  when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it.  If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly.  This will also sometimes happen in an email as well.  I am using the latest JAWS with Windows 10 and Office 2016.  Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all. 



Bill White
 

Hello again, Marty. Here is more information from the JAWS help material about sound schemes, how to activate, change them permanently, or how to temporarily change the sound scheme.

 

Speech and Sounds Schemes

Speech and Sounds Schemes Group

Use the Speech and Sounds Schemes group to customize how JAWS provides you with different types of information. For example, you can easily configure JAWS

to play an ascending tone when it encounters a check box that is selected, a descending tone for check boxes that are not selected, and say "type here"

every time it encounters an edit field. If you work with documents that contain text in another language, and that text is always bold, you can make JAWS

switch to a specific language when it encounters bolded text. There are many possibilities, depending on your needs.

You can save your speech and sound settings as a scheme. Schemes are lists of Speech Manager rules, saved as .smf files, located in the C:\Users\User Name\AppData\Roaming\Freedom

Scientific\JAWS\Version Number\Settings\ENU folder. You can create and save several schemes, however, only one scheme is active at a time.

To change speech and sound settings, open the Speech and Sounds Schemes group in Settings Center.

Selecting, Editing, and Creating Schemes

JAWS comes with several schemes by default. The classic scheme sets JAWS to behave as it always has, and is a good starting point. The other schemes use

the Classic scheme as a foundation and add additional information, useful for things such as proofreading documents. Use the Speech and Sounds Manager

to select, edit, save, or create schemes. For example:

list of 4 items

• To make a different scheme active, select it from the scheme list. Press INSERT+T to read the title bar, and JAWS announces the active scheme. To

edit the active scheme,

TAB to and activate the Edit Current Scheme button. After editing a scheme, be sure to save the changes by activating the Save Current Scheme button.

• To save a copy of the current scheme under a different name, activate the Save Current Scheme As button. This creates a copy of the active scheme with

a name you choose, allowing you to make modifications to the new scheme without changing the old one.

• To create a new scheme, activate the Create New Scheme button. This creates a new scheme based on the Classic Scheme settings. To make changes to the

new scheme, select it in the schemes list and activate the Edit Current Scheme button. Refer to the help topic

Edit Scheme Dialog

for more information on creating or modifying a scheme.

• To delete a scheme, select it from the list, then activate the Delete Scheme button. You cannot delete the Classic Scheme.

list end

Tip: You can use training mode to familiarize yourself with how the active scheme uses sounds to provide information. See

Training Mode

below for more information.

Changing Schemes On the Fly

In addition to changing schemes permanently through Settings Center, JAWS offers a way to quickly and temporarily change schemes. To do this, press ALT+INSERT+S,

then select the scheme to use and press ENTER.

Training Mode

Training mode helps you familiarize yourself with how a scheme uses sounds to provide information. When training mode is on, JAWS announces detailed information

for items, states, and attributes as well as the sounds assigned to them in the active scheme. You hear the sound, and then JAWS announces the same information

you hear when using the "Classic" scheme.

Tip: Training mode also announces information for items, states, and attributes that the scheme ignores.

Since the sound assignments made by the scheme's creator may not be immediately obvious, training mode can help you determine the purpose of each sound.

For example, if a scheme uses two different sounds to indicate the state of a check box, you might not be able to tell which sound indicates that the check

box is selected. If training mode is on, JAWS plays the sound and then says, "checked" or "not checked."

To turn training mode on or off:

list of 3 items

1. Press ALT+INSERT+S.

2. To turn training mode on, select "Toggle Speech and Sounds Training Mode On." If you want to turn training mode off, select "Toggle Speech and Sounds

Training Mode Off."

3. Press ENTER.

list end

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marty Hutchings
Sent: Wednesday, June 16, 2021 9:27 PM
To: main@jfw.groups.io
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

 

I am already on the Classic Scheme.  Just what exactly is the point of having so many scheme choices?

On 6/16/2021 4:26 PM, Mike B wrote:



Hi Marty,

 

I don't use Vocalizer, but take a look at which speech and sound scheme you're running. 

 

Press, Insert, Alt + S, to open the sound scheme list and take notice of which scheme is highlighted. 

 

If it's not one called, Classic, navigate to the Classic scheme and press enter.  Now see if it reads any better.  If not switch back to your other scheme.  You could try other schemes to see if any others read better and keep in mind you can always switch back.

 

Also try switching to Eloquence and see if Eloquence reads correctly.

 

 

Stay safe & take care.  Mike.
Just once, I want a username and password prompt to say:  "Close Enough!"
 

----- Original Message -----

Sent: Wednesday, June 16, 2021 1:03 PM

Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

 

OK, JAWS reads my document perfectly with the alternative default mode on.  How do I figure out which setting is causing the problem?  I am using Vocalizer Expressive voice.  Could this be causing this?

On 6/16/2021 12:25 AM, Udo Egner-Walter via groups.io wrote:

Hi Marty, 

 

To find out if a JAWS setting is responsible for such a behavior you could activate the alternative User by pressing JAWS+Space, then Z. This temporarily turns off your settings to check if a setting is responsible for this. To go back to your normal user settings press the hot key again (JAWS+Space, Z). 

 

If no setting entry causes this issue you could provide such a file with a cloud device so one can have a closer look at this. 

 

Udo 



Am 16.06.2021 um 07:47 schrieb Marty Hutchings <mhutchings152730@...>:

 

I have very few JAWS dictionary entries and I am sure that that is not one of them.  I don't know if this group allows attachments to messages, but I will try to attach a document with examples.  See if your system reads correctly.

On 6/15/2021 9:42 PM, Glenn / Lenny wrote:



I think reading word by word will not use a dictionary entry.

Might you have a dictionary entry that is making it speak nothing for that?

Glenn

----- Original Message ----- 

Sent: Tuesday, June 15, 2021 10:37 PM

Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

 

Can you post an example of an email where it happens? For the record, on my system, it isn’t happening with the date in this message.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email

Hello,  I posted this question a while ago and this is still happening.  I will type a line of text in a WORD document with a date such as "Saturday, August 14".  when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it.  If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly.  This will also sometimes happen in an email as well.  I am using the latest JAWS with Windows 10 and Office 2016.  Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all. 

 


Bill White
 

Hi, Marty. The various JAWS Sound Schemes make it possible to change the behavior of JAWS in specific circumstances. One example I will give is the sound scheme which allows a change in how JAWS announces capital letters. One of the schemes allows JAWS to say CAP when a capital letter is encountered. Other changes are made as well, making it easier to proofread and edit documents, text files and e-mails.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marty Hutchings
Sent: Wednesday, June 16, 2021 9:27 PM
To: main@jfw.groups.io
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

 

I am already on the Classic Scheme.  Just what exactly is the point of having so many scheme choices?

On 6/16/2021 4:26 PM, Mike B wrote:



Hi Marty,

 

I don't use Vocalizer, but take a look at which speech and sound scheme you're running. 

 

Press, Insert, Alt + S, to open the sound scheme list and take notice of which scheme is highlighted. 

 

If it's not one called, Classic, navigate to the Classic scheme and press enter.  Now see if it reads any better.  If not switch back to your other scheme.  You could try other schemes to see if any others read better and keep in mind you can always switch back.

 

Also try switching to Eloquence and see if Eloquence reads correctly.

 

 

Stay safe & take care.  Mike.
Just once, I want a username and password prompt to say:  "Close Enough!"
 

----- Original Message -----

Sent: Wednesday, June 16, 2021 1:03 PM

Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

 

OK, JAWS reads my document perfectly with the alternative default mode on.  How do I figure out which setting is causing the problem?  I am using Vocalizer Expressive voice.  Could this be causing this?

On 6/16/2021 12:25 AM, Udo Egner-Walter via groups.io wrote:

Hi Marty, 

 

To find out if a JAWS setting is responsible for such a behavior you could activate the alternative User by pressing JAWS+Space, then Z. This temporarily turns off your settings to check if a setting is responsible for this. To go back to your normal user settings press the hot key again (JAWS+Space, Z). 

 

If no setting entry causes this issue you could provide such a file with a cloud device so one can have a closer look at this. 

 

Udo 



Am 16.06.2021 um 07:47 schrieb Marty Hutchings <mhutchings152730@...>:

 

I have very few JAWS dictionary entries and I am sure that that is not one of them.  I don't know if this group allows attachments to messages, but I will try to attach a document with examples.  See if your system reads correctly.

On 6/15/2021 9:42 PM, Glenn / Lenny wrote:



I think reading word by word will not use a dictionary entry.

Might you have a dictionary entry that is making it speak nothing for that?

Glenn

----- Original Message ----- 

Sent: Tuesday, June 15, 2021 10:37 PM

Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

 

Can you post an example of an email where it happens? For the record, on my system, it isn’t happening with the date in this message.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email

Hello,  I posted this question a while ago and this is still happening.  I will type a line of text in a WORD document with a date such as "Saturday, August 14".  when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it.  If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly.  This will also sometimes happen in an email as well.  I am using the latest JAWS with Windows 10 and Office 2016.  Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all. 

 


Marty Hutchings
 

I am already on the Classic Scheme.  Just what exactly is the point of having so many scheme choices?

On 6/16/2021 4:26 PM, Mike B wrote:

Hi Marty,
 
I don't use Vocalizer, but take a look at which speech and sound scheme you're running. 
 
Press, Insert, Alt + S, to open the sound scheme list and take notice of which scheme is highlighted. 
 
If it's not one called, Classic, navigate to the Classic scheme and press enter.  Now see if it reads any better.  If not switch back to your other scheme.  You could try other schemes to see if any others read better and keep in mind you can always switch back.
 
Also try switching to Eloquence and see if Eloquence reads correctly.
 
 
Stay safe & take care.  Mike.
Just once, I want a username and password prompt to say:  "Close Enough!"
 
----- Original Message -----
Sent: Wednesday, June 16, 2021 1:03 PM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

OK, JAWS reads my document perfectly with the alternative default mode on.  How do I figure out which setting is causing the problem?  I am using Vocalizer Expressive voice.  Could this be causing this?

On 6/16/2021 12:25 AM, Udo Egner-Walter via groups.io wrote:
Hi Marty, 

To find out if a JAWS setting is responsible for such a behavior you could activate the alternative User by pressing JAWS+Space, then Z. This temporarily turns off your settings to check if a setting is responsible for this. To go back to your normal user settings press the hot key again (JAWS+Space, Z). 

If no setting entry causes this issue you could provide such a file with a cloud device so one can have a closer look at this. 

Udo 

Am 16.06.2021 um 07:47 schrieb Marty Hutchings <mhutchings152730@...>:

I have very few JAWS dictionary entries and I am sure that that is not one of them.  I don't know if this group allows attachments to messages, but I will try to attach a document with examples.  See if your system reads correctly.

On 6/15/2021 9:42 PM, Glenn / Lenny wrote:

I think reading word by word will not use a dictionary entry.
Might you have a dictionary entry that is making it speak nothing for that?
Glenn
----- Original Message ----- 
Sent: Tuesday, June 15, 2021 10:37 PM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Can you post an example of an email where it happens? For the record, on my system, it isn’t happening with the date in this message.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email
Hello,  I posted this question a while ago and this is still happening.  I will type a line of text in a WORD document with a date such as "Saturday, August 14".  when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it.  If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly.  This will also sometimes happen in an email as well.  I am using the latest JAWS with Windows 10 and Office 2016.  Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all. 


Mike B.
 


Hi Marty,
 
I don't use Vocalizer, but take a look at which speech and sound scheme you're running. 
 
Press, Insert, Alt + S, to open the sound scheme list and take notice of which scheme is highlighted. 
 
If it's not one called, Classic, navigate to the Classic scheme and press enter.  Now see if it reads any better.  If not switch back to your other scheme.  You could try other schemes to see if any others read better and keep in mind you can always switch back.
 
Also try switching to Eloquence and see if Eloquence reads correctly.
 
 
Stay safe & take care.  Mike.
Just once, I want a username and password prompt to say:  "Close Enough!"
 

----- Original Message -----
Sent: Wednesday, June 16, 2021 1:03 PM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

OK, JAWS reads my document perfectly with the alternative default mode on.  How do I figure out which setting is causing the problem?  I am using Vocalizer Expressive voice.  Could this be causing this?

On 6/16/2021 12:25 AM, Udo Egner-Walter via groups.io wrote:
Hi Marty, 

To find out if a JAWS setting is responsible for such a behavior you could activate the alternative User by pressing JAWS+Space, then Z. This temporarily turns off your settings to check if a setting is responsible for this. To go back to your normal user settings press the hot key again (JAWS+Space, Z). 

If no setting entry causes this issue you could provide such a file with a cloud device so one can have a closer look at this. 

Udo 

Am 16.06.2021 um 07:47 schrieb Marty Hutchings <mhutchings152730@...>:

I have very few JAWS dictionary entries and I am sure that that is not one of them.  I don't know if this group allows attachments to messages, but I will try to attach a document with examples.  See if your system reads correctly.

On 6/15/2021 9:42 PM, Glenn / Lenny wrote:

I think reading word by word will not use a dictionary entry.
Might you have a dictionary entry that is making it speak nothing for that?
Glenn
----- Original Message ----- 
Sent: Tuesday, June 15, 2021 10:37 PM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Can you post an example of an email where it happens? For the record, on my system, it isn’t happening with the date in this message.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email
Hello,  I posted this question a while ago and this is still happening.  I will type a line of text in a WORD document with a date such as "Saturday, August 14".  when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it.  If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly.  This will also sometimes happen in an email as well.  I am using the latest JAWS with Windows 10 and Office 2016.  Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all. 


Marty Hutchings
 

OK, JAWS reads my document perfectly with the alternative default mode on.  How do I figure out which setting is causing the problem?  I am using Vocalizer Expressive voice.  Could this be causing this?

On 6/16/2021 12:25 AM, Udo Egner-Walter via groups.io wrote:
Hi Marty, 

To find out if a JAWS setting is responsible for such a behavior you could activate the alternative User by pressing JAWS+Space, then Z. This temporarily turns off your settings to check if a setting is responsible for this. To go back to your normal user settings press the hot key again (JAWS+Space, Z). 

If no setting entry causes this issue you could provide such a file with a cloud device so one can have a closer look at this. 

Udo 

Am 16.06.2021 um 07:47 schrieb Marty Hutchings <mhutchings152730@...>:

I have very few JAWS dictionary entries and I am sure that that is not one of them.  I don't know if this group allows attachments to messages, but I will try to attach a document with examples.  See if your system reads correctly.

On 6/15/2021 9:42 PM, Glenn / Lenny wrote:

I think reading word by word will not use a dictionary entry.
Might you have a dictionary entry that is making it speak nothing for that?
Glenn
----- Original Message ----- 
Sent: Tuesday, June 15, 2021 10:37 PM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Can you post an example of an email where it happens? For the record, on my system, it isn’t happening with the date in this message.
 
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email
 
Hello,  I posted this question a while ago and this is still happening.  I will type a line of text in a WORD document with a date such as "Saturday, August 14".  when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it.  If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly.  This will also sometimes happen in an email as well.  I am using the latest JAWS with Windows 10 and Office 2016.  Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all. 


Glenn / Lenny
 

Oh ya, this has happened with every reboot, the paragraph problem that is.
Glenn

----- Original Message -----
From: "Ann Byrne" <annakb@sbcglobal.net>
To: <main@jfw.groups.io>
Sent: Wednesday, June 16, 2021 9:54 AM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email


Sometimes JAWS just looses its perspective. Be
sure to try unloading and reloading it to clear its brain.
At 09:49 AM 6/16/2021, you wrote:

I just tried this to test my Jaws problem, where it isn't reading paragraphs right, but NVDA does, and this never happened in Jaws 2019, but when I went to this setting, it was worse than in my settings, it did not read paragraphs at all.
Interesting feature though, I didn't know about this mode.

Glenn
----- Original Message -----
From: <mailto:udo.egnerwalter=icloud.com@groups.io>Udo Egner-Walter via groups.io
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Sent: Wednesday, June 16, 2021 1:25 AM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Hi Marty,

To find out if a JAWS setting is responsible for such a behavior you could activate the alternative User by pressing JAWS+Space, then Z. This temporarily turns off your settings to check if a setting is responsible for this. To go back to your normal user settings press the hot key again (JAWS+Space, Z).

If no setting entry causes this issue you could provide such a file with a cloud device so one can have a closer look at this.

Udo

Am 16.06.2021 um 07:47 schrieb Marty Hutchings <<mailto:mhutchings152730@gmail.com>mhutchings152730@gmail.com>:

I have very few JAWS dictionary entries and I am sure that that is not one of them. I don't know if this group allows attachments to messages, but I will try to attach a document with examples. See if your system reads correctly.
On 6/15/2021 9:42 PM, Glenn / Lenny wrote:

I think reading word by word will not use a dictionary entry.
Might you have a dictionary entry that is making it speak nothing for that?
Glenn
----- Original Message -----
From: <mailto:adrian@adrianspratt.com>Adrian Spratt
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Sent: Tuesday, June 15, 2021 10:37 PM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Can you post an example of an email where it happens? For the record, on my system, it isnâ?Tt happening with the date in this message.
From: <mailto:main@jfw.groups.io>main@jfw.groups.io <<mailto:main@jfw.groups.io>main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email
Hello, I posted this question a while ago and this is still happening. I will type a line of text in a WORD document with a date such as "Saturday, August 14". when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it. If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly. This will also sometimes happen in an email as well. I am using the latest JAWS with Windows 10 and Office 2016. Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all.


Ann Byrne
 

Sometimes JAWS just looses its perspective. Be sure to try unloading and reloading it to clear its brain.

At 09:49 AM 6/16/2021, you wrote:

I just tried this to test my Jaws problem, where it isn't reading paragraphs right, but NVDA does, and this never happened in Jaws 2019, but when I went to this setting, it was worse than in my settings, it did not read paragraphs at all.
Interesting feature though, I didn't know about this mode.

Glenn
----- Original Message -----
From: <mailto:udo.egnerwalter=icloud.com@groups.io>Udo Egner-Walter via groups.io
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Sent: Wednesday, June 16, 2021 1:25 AM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Hi Marty,

To find out if a JAWS setting is responsible for such a behavior you could activate the alternative User by pressing JAWS+Space, then Z. This temporarily turns off your settings to check if a setting is responsible for this. To go back to your normal user settings press the hot key again (JAWS+Space, Z).

If no setting entry causes this issue you could provide such a file with a cloud device so one can have a closer look at this.

Udo

Am 16.06.2021 um 07:47 schrieb Marty Hutchings <<mailto:mhutchings152730@gmail.com>mhutchings152730@gmail.com>:

I have very few JAWS dictionary entries and I am sure that that is not one of them. I don't know if this group allows attachments to messages, but I will try to attach a document with examples. See if your system reads correctly.
On 6/15/2021 9:42 PM, Glenn / Lenny wrote:

I think reading word by word will not use a dictionary entry.
Might you have a dictionary entry that is making it speak nothing for that?
Glenn
----- Original Message -----
From: <mailto:adrian@adrianspratt.com>Adrian Spratt
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Sent: Tuesday, June 15, 2021 10:37 PM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Can you post an example of an email where it happens? For the record, on my system, it isn’t happening with the date in this message.
From: <mailto:main@jfw.groups.io>main@jfw.groups.io <<mailto:main@jfw.groups.io>main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: <mailto:main@jfw.groups.io>main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email
Hello, I posted this question a while ago and this is still happening. I will type a line of text in a WORD document with a date such as "Saturday, August 14". when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it. If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly. This will also sometimes happen in an email as well. I am using the latest JAWS with Windows 10 and Office 2016. Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all.


Glenn / Lenny
 


I just tried this to test my Jaws problem, where it isn't reading paragraphs right, but NVDA does, and this never happened in Jaws 2019, but when I went to this setting, it was worse than in my settings, it did not read paragraphs at all.
Interesting feature though, I didn't know about this mode.
 
Glenn

----- Original Message -----
Sent: Wednesday, June 16, 2021 1:25 AM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Hi Marty, 

To find out if a JAWS setting is responsible for such a behavior you could activate the alternative User by pressing JAWS+Space, then Z. This temporarily turns off your settings to check if a setting is responsible for this. To go back to your normal user settings press the hot key again (JAWS+Space, Z). 

If no setting entry causes this issue you could provide such a file with a cloud device so one can have a closer look at this. 

Udo 

Am 16.06.2021 um 07:47 schrieb Marty Hutchings <mhutchings152730@...>:

I have very few JAWS dictionary entries and I am sure that that is not one of them.  I don't know if this group allows attachments to messages, but I will try to attach a document with examples.  See if your system reads correctly.

On 6/15/2021 9:42 PM, Glenn / Lenny wrote:

I think reading word by word will not use a dictionary entry.
Might you have a dictionary entry that is making it speak nothing for that?
Glenn
----- Original Message ----- 
Sent: Tuesday, June 15, 2021 10:37 PM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Can you post an example of an email where it happens? For the record, on my system, it isn’t happening with the date in this message.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email
Hello,  I posted this question a while ago and this is still happening.  I will type a line of text in a WORD document with a date such as "Saturday, August 14".  when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it.  If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly.  This will also sometimes happen in an email as well.  I am using the latest JAWS with Windows 10 and Office 2016.  Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all. 


Udo Egner-Walter
 

Hi Marty, 

To find out if a JAWS setting is responsible for such a behavior you could activate the alternative User by pressing JAWS+Space, then Z. This temporarily turns off your settings to check if a setting is responsible for this. To go back to your normal user settings press the hot key again (JAWS+Space, Z). 

If no setting entry causes this issue you could provide such a file with a cloud device so one can have a closer look at this. 

Udo 

Am 16.06.2021 um 07:47 schrieb Marty Hutchings <mhutchings152730@...>:

I have very few JAWS dictionary entries and I am sure that that is not one of them.  I don't know if this group allows attachments to messages, but I will try to attach a document with examples.  See if your system reads correctly.

On 6/15/2021 9:42 PM, Glenn / Lenny wrote:

I think reading word by word will not use a dictionary entry.
Might you have a dictionary entry that is making it speak nothing for that?
Glenn
----- Original Message ----- 
Sent: Tuesday, June 15, 2021 10:37 PM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Can you post an example of an email where it happens? For the record, on my system, it isn’t happening with the date in this message.
 
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email
 
Hello,  I posted this question a while ago and this is still happening.  I will type a line of text in a WORD document with a date such as "Saturday, August 14".  when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it.  If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly.  This will also sometimes happen in an email as well.  I am using the latest JAWS with Windows 10 and Office 2016.  Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all. 


Marty Hutchings
 

I have very few JAWS dictionary entries and I am sure that that is not one of them.  I don't know if this group allows attachments to messages, but I will try to attach a document with examples.  See if your system reads correctly.

On 6/15/2021 9:42 PM, Glenn / Lenny wrote:

I think reading word by word will not use a dictionary entry.
Might you have a dictionary entry that is making it speak nothing for that?
Glenn
----- Original Message -----
Sent: Tuesday, June 15, 2021 10:37 PM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Can you post an example of an email where it happens? For the record, on my system, it isn’t happening with the date in this message.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email

 

Hello,  I posted this question a while ago and this is still happening.  I will type a line of text in a WORD document with a date such as "Saturday, August 14".  when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it.  If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly.  This will also sometimes happen in an email as well.  I am using the latest JAWS with Windows 10 and Office 2016.  Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all.


Glenn / Lenny
 


I think reading word by word will not use a dictionary entry.
Might you have a dictionary entry that is making it speak nothing for that?
Glenn

----- Original Message -----
Sent: Tuesday, June 15, 2021 10:37 PM
Subject: Re: JAWSnot reading lines of text with dates in them in WORD and email

Can you post an example of an email where it happens? For the record, on my system, it isn’t happening with the date in this message.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email

 

Hello,  I posted this question a while ago and this is still happening.  I will type a line of text in a WORD document with a date such as "Saturday, August 14".  when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it.  If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly.  This will also sometimes happen in an email as well.  I am using the latest JAWS with Windows 10 and Office 2016.  Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all.


Adrian Spratt
 

Can you post an example of an email where it happens? For the record, on my system, it isn’t happening with the date in this message.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 15, 2021 9:20 PM
To: main@jfw.groups.io
Subject: JAWSnot reading lines of text with dates in them in WORD and email

 

Hello,  I posted this question a while ago and this is still happening.  I will type a line of text in a WORD document with a date such as "Saturday, August 14".  when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it.  If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly.  This will also sometimes happen in an email as well.  I am using the latest JAWS with Windows 10 and Office 2016.  Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all.


Marty Hutchings
 

Hello,  I posted this question a while ago and this is still happening.  I will type a line of text in a WORD document with a date such as "Saturday, August 14".  when I read by pressing Insert + Down Arrow for Say All, or when reading by pressing Down Arrow to read line by line, JAWS will not say anything when I get to the line with the date in it.  If I read word by word by pressing Control + Right Arrow, JAWS will read perfectly.  This will also sometimes happen in an email as well.  I am using the latest JAWS with Windows 10 and Office 2016.  Has anyone else had this happen?
Thanks.
Marty Hutchings
The Gospel is freely accessible to all.