best way to regain speech if JAWS is silent?


Van Lant, Robin
 

What is the best way to regain speech if JAWS goes silent?  IN later versions of Window Eyes, I could just hit the launch hotkeys of Control Alt W and WE would restart, but this doesn’t’ work with JAWS.  It seems that Control Alt J may be bringing up the JAWS home screen (or whatever it’s called) and then I can hit Alt F4 to close it, but is this the best way?

 

 

 

Robin Van Lant | Sr. Program Manager

Strategy & Performance Management | Key Equipment Finance

720-304-1060 | Robin_Van_Lant@...

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Mario
 

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you want
to start JAWS.

-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later
versions of Window Eyes, I could just hit the launch hotkeys of Control
Alt W and WE would restart, but this doesn't' work with JAWS. It seems
that Control Alt J may be bringing up the JAWS home screen (or whatever
it's called) and then I can hit Alt F4 to close it, but is this the best
way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional
E-mails' in the
SUBJECT line.


Alan Robbins
 

I usually just do a run line command (windows key plus letter r) then type
the word jaws followed by version number with no spaces between the word
jaws and version number. So to start most current version, the run dialogue
box would read following line:
Jaws2018

Once typed simply hit enter and it is up and running.

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, November 29, 2017 7:45 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you want
to start JAWS.


-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later
versions of Window Eyes, I could just hit the launch hotkeys of Control
Alt W and WE would restart, but this doesn't' work with JAWS. It seems
that Control Alt J may be bringing up the JAWS home screen (or whatever
it's called) and then I can hit Alt F4 to close it, but is this the best
way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional
E-mails' in the
SUBJECT line.


 

Just starting Jaws may not be the solution if Jaws has crashed and is displaying some error message. For the most part if you wait long enough Jaws restarts by itself and by "long enough" I mean at least 30 or 40 seconds. After that you can try Jaws Key+Alt+F4, this unloads and reloads Jaws. If that doesn't work you can definitely try to simply launch Jaws either using the Run command as described, Windows+R then type Jaws18 or Jaws2018 and press enter or you can of course set a shortcut key combination like Control+Alt+J.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan Robbins
Sent: Wednesday, November 29, 2017 4:50 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

I usually just do a run line command (windows key plus letter r) then type the word jaws followed by version number with no spaces between the word jaws and version number. So to start most current version, the run dialogue box would read following line:
Jaws2018

Once typed simply hit enter and it is up and running.

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, November 29, 2017 7:45 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you want
to start JAWS.


-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later
versions of Window Eyes, I could just hit the launch hotkeys of Control
Alt W and WE would restart, but this doesn't' work with JAWS. It seems
that Control Alt J may be bringing up the JAWS home screen (or whatever
it's called) and then I can hit Alt F4 to close it, but is this the best
way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional
E-mails' in the
SUBJECT line.


Van Lant, Robin
 

I'll give these all a try. In the case earlier tonight, I don't think there was an error. My Windows 10 laptop had gone to the locked screen and when I tried to log back in, I couldn't get JAWS to speak. Even after I got logged back in, speech did not return. I have since upgraded to JAWS 2018, so maybe this will fix whatever bug I was encountering.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel
Sent: Wednesday, November 29, 2017 8:40 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

Just starting Jaws may not be the solution if Jaws has crashed and is displaying some error message. For the most part if you wait long enough Jaws restarts by itself and by "long enough" I mean at least 30 or 40 seconds. After that you can try Jaws Key+Alt+F4, this unloads and reloads Jaws. If that doesn't work you can definitely try to simply launch Jaws either using the Run command as described, Windows+R then type Jaws18 or Jaws2018 and press enter or you can of course set a shortcut key combination like Control+Alt+J.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan Robbins
Sent: Wednesday, November 29, 2017 4:50 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

I usually just do a run line command (windows key plus letter r) then type the word jaws followed by version number with no spaces between the word jaws and version number. So to start most current version, the run dialogue box would read following line:
Jaws2018

Once typed simply hit enter and it is up and running.

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, November 29, 2017 7:45 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you want
to start JAWS.


-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later versions of Window Eyes, I could just hit the launch hotkeys of Control Alt W and WE would restart, but this doesn't' work with JAWS. It seems that Control Alt J may be bringing up the JAWS home screen (or whatever it's called) and then I can hit Alt F4 to close it, but is this the best way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to mailto:DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.


Michael Mote
 

It really depends on why JAWS stopped talking.  If there is an error, JAWS can sometimes restart itself, and begin talking after about 60 seconds.  If it is more serious than that, you may consider starting Narrator to figure out what’s happening.  Perhaps, you can get enough speech to determine if you have an error message on the screen.  In Windows 10, you launch Narrator by pressing Control Windows and enter all together.  Hope this is helpful!

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Van Lant, Robin via Groups.Io
Sent: Wednesday, November 29, 2017 7:11 PM
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

 

What is the best way to regain speech if JAWS goes silent?  IN later versions of Window Eyes, I could just hit the launch hotkeys of Control Alt W and WE would restart, but this doesn’t’ work with JAWS.  It seems that Control Alt J may be bringing up the JAWS home screen (or whatever it’s called) and then I can hit Alt F4 to close it, but is this the best way?

 

 

 

Robin Van Lant | Sr. Program Manager

Strategy & Performance Management | Key Equipment Finance

720-304-1060 | Robin_Van_Lant@...

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Paul Hunt <prhunt1@...>
 

Hello. JawsKey+WindowsKey+f4 doesn’t work and JAWS doesn’t restart. If I start Narrator and kill the Jaws process I can restart Jaws. The problem is Narrator is too verbose in the Task Manager.

On Nov 29, 2017, at 9:39 PM, Sieghard Weitzel <sieghard@live.ca> wrote:

Just starting Jaws may not be the solution if Jaws has crashed and is displaying some error message. For the most part if you wait long enough Jaws restarts by itself and by "long enough" I mean at least 30 or 40 seconds. After that you can try Jaws Key+Alt+F4, this unloads and reloads Jaws. If that doesn't work you can definitely try to simply launch Jaws either using the Run command as described, Windows+R then type Jaws18 or Jaws2018 and press enter or you can of course set a shortcut key combination like Control+Alt+J.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan Robbins
Sent: Wednesday, November 29, 2017 4:50 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

I usually just do a run line command (windows key plus letter r) then type the word jaws followed by version number with no spaces between the word jaws and version number. So to start most current version, the run dialogue box would read following line:
Jaws2018

Once typed simply hit enter and it is up and running.

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, November 29, 2017 7:45 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you want
to start JAWS.


-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later
versions of Window Eyes, I could just hit the launch hotkeys of Control
Alt W and WE would restart, but this doesn't' work with JAWS. It seems
that Control Alt J may be bringing up the JAWS home screen (or whatever
it's called) and then I can hit Alt F4 to close it, but is this the best
way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional
E-mails' in the
SUBJECT line.












Jonas Voll
 

At the minimum evry one needs at least a portable copy of NVDA on the system, for backup!


Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Paul Hunt
Sent: Thursday, November 30, 2017 7:33 AM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

Hello. JawsKey+WindowsKey+f4 doesn’t work and JAWS doesn’t restart. If I start Narrator and kill the Jaws process I can restart Jaws. The problem is Narrator is too verbose in the Task Manager.

On Nov 29, 2017, at 9:39 PM, Sieghard Weitzel <sieghard@live.ca> wrote:

Just starting Jaws may not be the solution if Jaws has crashed and is displaying some error message. For the most part if you wait long enough Jaws restarts by itself and by "long enough" I mean at least 30 or 40 seconds. After that you can try Jaws Key+Alt+F4, this unloads and reloads Jaws. If that doesn't work you can definitely try to simply launch Jaws either using the Run command as described, Windows+R then type Jaws18 or Jaws2018 and press enter or you can of course set a shortcut key combination like Control+Alt+J.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan
Robbins
Sent: Wednesday, November 29, 2017 4:50 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

I usually just do a run line command (windows key plus letter r) then type the word jaws followed by version number with no spaces between the word jaws and version number. So to start most current version, the run dialogue box would read following line:
Jaws2018

Once typed simply hit enter and it is up and running.

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Mario
Sent: Wednesday, November 29, 2017 7:45 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you
insert+want
to start JAWS.


-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later
versions of Window Eyes, I could just hit the launch hotkeys of
Control Alt W and WE would restart, but this doesn't' work with JAWS.
It seems that Control Alt J may be bringing up the JAWS home screen
(or whatever it's called) and then I can hit Alt F4 to close it, but
is this the best way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If
you are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether
electronic or hard copy. This communication may contain nonpublic
personal information about consumers subject to the restrictions of
the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse
or redisclose such information for any purpose other than to provide
the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114 If you prefer not to receive
future e-mail offers for products or services from Key send an e-mail
to mailto:DNERequests@key.com with 'No Promotional E-mails' in the
SUBJECT line.















SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com
and
logon with your domain userid and password.
If you consider this email to be spam please forward it to
'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.


Randy Barnett <randy@...>
 

You have to use this key combo once to unload Jaws then again to reload Jaws. It is a two step procedure. The second time it will start Jaws and generate an error report to send to FS.

On 11/30/2017 5:32 AM, Paul Hunt wrote:
Hello. JawsKey+WindowsKey+f4 doesn’t work and JAWS doesn’t restart. If I start Narrator and kill the Jaws process I can restart Jaws. The problem is Narrator is too verbose in the Task Manager.

On Nov 29, 2017, at 9:39 PM, Sieghard Weitzel <sieghard@live.ca> wrote:

Just starting Jaws may not be the solution if Jaws has crashed and is displaying some error message. For the most part if you wait long enough Jaws restarts by itself and by "long enough" I mean at least 30 or 40 seconds. After that you can try Jaws Key+Alt+F4, this unloads and reloads Jaws. If that doesn't work you can definitely try to simply launch Jaws either using the Run command as described, Windows+R then type Jaws18 or Jaws2018 and press enter or you can of course set a shortcut key combination like Control+Alt+J.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan Robbins
Sent: Wednesday, November 29, 2017 4:50 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

I usually just do a run line command (windows key plus letter r) then type the word jaws followed by version number with no spaces between the word jaws and version number. So to start most current version, the run dialogue box would read following line:
Jaws2018

Once typed simply hit enter and it is up and running.

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, November 29, 2017 7:45 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you want
to start JAWS.


-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later
versions of Window Eyes, I could just hit the launch hotkeys of Control
Alt W and WE would restart, but this doesn't' work with JAWS. It seems
that Control Alt J may be bringing up the JAWS home screen (or whatever
it's called) and then I can hit Alt F4 to close it, but is this the best
way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional
E-mails' in the
SUBJECT line.











--
Sincerely: Randy Barnett
Owner of Soundtique.
Grants Pass, Or.


Bill White <billwhite92701@...>
 

Hi, Randy. I use JAWS 2018, and for me, it is not a two-step process. If I use WINDOWS Key plus JAWS Key plus F4, JAWS unloads, then reloads in about 60 seconds.

Bill White
Billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Randy Barnett
Sent: Friday, December 1, 2017 11:19 AM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

You have to use this key combo once to unload Jaws then again to reload
Jaws. It is a two step procedure. The second time it will start Jaws and
generate an error report to send to FS.
On 11/30/2017 5:32 AM, Paul Hunt wrote:
Hello. JawsKey+WindowsKey+f4 doesn’t work and JAWS doesn’t restart. If I start Narrator and kill the Jaws process I can restart Jaws. The problem is Narrator is too verbose in the Task Manager.

On Nov 29, 2017, at 9:39 PM, Sieghard Weitzel <sieghard@live.ca> wrote:

Just starting Jaws may not be the solution if Jaws has crashed and is displaying some error message. For the most part if you wait long enough Jaws restarts by itself and by "long enough" I mean at least 30 or 40 seconds. After that you can try Jaws Key+Alt+F4, this unloads and reloads Jaws. If that doesn't work you can definitely try to simply launch Jaws either using the Run command as described, Windows+R then type Jaws18 or Jaws2018 and press enter or you can of course set a shortcut key combination like Control+Alt+J.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan Robbins
Sent: Wednesday, November 29, 2017 4:50 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

I usually just do a run line command (windows key plus letter r) then type the word jaws followed by version number with no spaces between the word jaws and version number. So to start most current version, the run dialogue box would read following line:
Jaws2018

Once typed simply hit enter and it is up and running.

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, November 29, 2017 7:45 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you want
to start JAWS.


-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later
versions of Window Eyes, I could just hit the launch hotkeys of Control
Alt W and WE would restart, but this doesn't' work with JAWS. It seems
that Control Alt J may be bringing up the JAWS home screen (or whatever
it's called) and then I can hit Alt F4 to close it, but is this the best
way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional
E-mails' in the
SUBJECT line.












--
Sincerely: Randy Barnett
Owner of Soundtique.
Grants Pass, Or.


Randy Barnett <randy@...>
 

Oh, I am not that patient!
I waited for maybe 30 seconds and figured I needed to do it again and it worked so I just do it that way. Smiley

On 12/1/2017 11:59 AM, Bill White wrote:
Hi, Randy. I use JAWS 2018, and for me, it is not a two-step process. If I use WINDOWS Key plus JAWS Key plus F4, JAWS unloads, then reloads in about 60 seconds.

Bill White
Billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Randy Barnett
Sent: Friday, December 1, 2017 11:19 AM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

You have to use this key combo once to unload Jaws then again to reload
Jaws. It is a two step procedure. The second time it will start Jaws and
generate an error report to send to FS.
On 11/30/2017 5:32 AM, Paul Hunt wrote:
Hello. JawsKey+WindowsKey+f4 doesn’t work and JAWS doesn’t restart. If I start Narrator and kill the Jaws process I can restart Jaws. The problem is Narrator is too verbose in the Task Manager.

On Nov 29, 2017, at 9:39 PM, Sieghard Weitzel <sieghard@live.ca> wrote:

Just starting Jaws may not be the solution if Jaws has crashed and is displaying some error message. For the most part if you wait long enough Jaws restarts by itself and by "long enough" I mean at least 30 or 40 seconds. After that you can try Jaws Key+Alt+F4, this unloads and reloads Jaws. If that doesn't work you can definitely try to simply launch Jaws either using the Run command as described, Windows+R then type Jaws18 or Jaws2018 and press enter or you can of course set a shortcut key combination like Control+Alt+J.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Alan Robbins
Sent: Wednesday, November 29, 2017 4:50 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

I usually just do a run line command (windows key plus letter r) then type the word jaws followed by version number with no spaces between the word jaws and version number. So to start most current version, the run dialogue box would read following line:
Jaws2018

Once typed simply hit enter and it is up and running.

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, November 29, 2017 7:45 PM
To: main@jfw.groups.io
Subject: Re: best way to regain speech if JAWS is silent?

need to go to the JAWS window. from anywhere, you could press to
insert+f4 and press the spacebar, then control+alt+j or however you want
to start JAWS.


-------- Original Message --------
From: Van Lant, Robin via Groups.Io
[mailto:Robin_Van_Lant=Key.com@groups.io]
Sent: Wednesday, Nov 29, 2017 7:10 PM EST
To: main@jfw.groups.io
Subject: best way to regain speech if JAWS is silent?

What is the best way to regain speech if JAWS goes silent? IN later
versions of Window Eyes, I could just hit the launch hotkeys of Control
Alt W and WE would restart, but this doesn't' work with JAWS. It seems
that Control Alt J may be bringing up the JAWS home screen (or whatever
it's called) and then I can hit Alt F4 to close it, but is this the best
way?



Robin Van Lant | Sr. Program Manager
Strategy & Performance Management | Key Equipment Finance
720-304-1060 | Robin_Van_Lant@key.com



This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional
E-mails' in the
SUBJECT line.











--
Sincerely: Randy Barnett (Owner)
Soundtique
Grants Pass, Oregon.