moderated jaws does not work properly in admin command window


John Covici
 

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window, I
see the text, but other wise nothing -- jaws cursor reads nothing as
well. Tech support says its not supported, but that makes no sense to
me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Chris Hill
 

Works fine in 1903.

On 6/22/2019 13:51, John Covici wrote:
Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window, I
see the text, but other wise nothing -- jaws cursor reads nothing as
well. Tech support says its not supported, but that makes no sense to
me and Narrator reads it fine.

Thanks in advance for any suggestions.


Munawar Bijani <munawarb@...>
 

Not sure why tech support says it's not supported. It has been supported and reads well for as long as I can remymver. Sure about 10 years ago jaws did horribly with command prompt but not in recent years.

On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com> wrote:

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window, I
see the text, but other wise nothing -- jaws cursor reads nothing as
well. Tech support says its not supported, but that makes no sense to
me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com



John Covici
 

Its only a problem in admin mode, running as administrator.

On Sat, 22 Jun 2019 19:34:00 -0400,
Munawar Bijani wrote:

Not sure why tech support says it's not supported. It has been supported and reads well for as long as I can remymver. Sure about 10 years ago jaws did horribly with command prompt but not in recent years.

On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com> wrote:

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window, I
see the text, but other wise nothing -- jaws cursor reads nothing as
well. Tech support says its not supported, but that makes no sense to
me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Munawar Bijani <munawarb@...>
 

Hi,

I just tried elevating to Admin Command Prompt and JAWS reads it just fine. What version of JAWS are you running?


I'm running an admin account with UAC set to the highest setting.

On 6/22/2019 8:01 PM, John Covici wrote:
Its only a problem in admin mode, running as administrator.

On Sat, 22 Jun 2019 19:34:00 -0400,
Munawar Bijani wrote:
Not sure why tech support says it's not supported. It has been supported and reads well for as long as I can remymver. Sure about 10 years ago jaws did horribly with command prompt but not in recent years.

On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com> wrote:

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window, I
see the text, but other wise nothing -- jaws cursor reads nothing as
well. Tech support says its not supported, but that makes no sense to
me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




John Covici
 

Jaws 2019 latest update.

On Sat, 22 Jun 2019 21:18:37 -0400,
Munawar Bijani wrote:

Hi,

I just tried elevating to Admin Command Prompt and JAWS reads it
just fine. What version of JAWS are you running?


I'm running an admin account with UAC set to the highest setting.

On 6/22/2019 8:01 PM, John Covici wrote:
Its only a problem in admin mode, running as administrator.

On Sat, 22 Jun 2019 19:34:00 -0400,
Munawar Bijani wrote:
Not sure why tech support says it's not supported. It has been supported and reads well for as long as I can remymver. Sure about 10 years ago jaws did horribly with command prompt but not in recent years.

On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com> wrote:

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window, I
see the text, but other wise nothing -- jaws cursor reads nothing as
well. Tech support says its not supported, but that makes no sense to
me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


 

I remember using the admin command prompt in 1809 and I don't think I ever had any issues with Jaws not reading it, but it definitely reads it in 1903.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Saturday, June 22, 2019 11:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Jaws 2019 latest update.

On Sat, 22 Jun 2019 21:18:37 -0400,
Munawar Bijani wrote:

Hi,

I just tried elevating to Admin Command Prompt and JAWS reads it just
fine. What version of JAWS are you running?


I'm running an admin account with UAC set to the highest setting.

On 6/22/2019 8:01 PM, John Covici wrote:
Its only a problem in admin mode, running as administrator.

On Sat, 22 Jun 2019 19:34:00 -0400,
Munawar Bijani wrote:
Not sure why tech support says it's not supported. It has been supported and reads well for as long as I can remymver. Sure about 10 years ago jaws did horribly with command prompt but not in recent years.

On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com> wrote:

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the
window, I see the text, but other wise nothing -- jaws cursor
reads nothing as well. Tech support says its not supported, but
that makes no sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Bill White <billwhite92701@...>
 

I had an incident where the CMD as admin command wouldn't work properly.
Everybody else's machine worked in this respect. I called the Microsoft
Disability answer desk, and they did a reinstall of Windows using the ISO
file, and after the repair, my cmd as admin command would read properly.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard
Weitzel
Sent: Sunday, June 23, 2019 9:01 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I remember using the admin command prompt in 1809 and I don't think I ever
had any issues with Jaws not reading it, but it definitely reads it in 1903.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Saturday, June 22, 2019 11:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Jaws 2019 latest update.

On Sat, 22 Jun 2019 21:18:37 -0400,
Munawar Bijani wrote:

Hi,

I just tried elevating to Admin Command Prompt and JAWS reads it just
fine. What version of JAWS are you running?


I'm running an admin account with UAC set to the highest setting.

On 6/22/2019 8:01 PM, John Covici wrote:
Its only a problem in admin mode, running as administrator.

On Sat, 22 Jun 2019 19:34:00 -0400,
Munawar Bijani wrote:
Not sure why tech support says it's not supported. It has been
supported and reads well for as long as I can remymver. Sure about 10 years
ago jaws did horribly with command prompt but not in recent years.

On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com>
wrote:

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the
window, I see the text, but other wise nothing -- jaws cursor
reads nothing as well. Tech support says its not supported, but
that makes no sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


John Covici
 

I might have to try that, it does read if you virtualize the text,
which is strange. I wonder if the legacy console features have
anything to do with this? Is yours on or off?

On Sun, 23 Jun 2019 12:05:22 -0400,
Bill White wrote:

I had an incident where the CMD as admin command wouldn't work properly.
Everybody else's machine worked in this respect. I called the Microsoft
Disability answer desk, and they did a reinstall of Windows using the ISO
file, and after the repair, my cmd as admin command would read properly.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard
Weitzel
Sent: Sunday, June 23, 2019 9:01 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I remember using the admin command prompt in 1809 and I don't think I ever
had any issues with Jaws not reading it, but it definitely reads it in 1903.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Saturday, June 22, 2019 11:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Jaws 2019 latest update.

On Sat, 22 Jun 2019 21:18:37 -0400,
Munawar Bijani wrote:

Hi,

I just tried elevating to Admin Command Prompt and JAWS reads it just
fine. What version of JAWS are you running?


I'm running an admin account with UAC set to the highest setting.

On 6/22/2019 8:01 PM, John Covici wrote:
Its only a problem in admin mode, running as administrator.

On Sat, 22 Jun 2019 19:34:00 -0400,
Munawar Bijani wrote:
Not sure why tech support says it's not supported. It has been
supported and reads well for as long as I can remymver. Sure about 10 years
ago jaws did horribly with command prompt but not in recent years.

On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com>
wrote:

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the
window, I see the text, but other wise nothing -- jaws cursor
reads nothing as well. Tech support says its not supported, but
that makes no sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com











--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Bill White <billwhite92701@...>
 

Once Microsoft repaired my copy of Windows, I didn't need the legacy
features of the Command console.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John
Covici
Sent: Sunday, June 23, 2019 10:03 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I might have to try that, it does read if you virtualize the text,
which is strange. I wonder if the legacy console features have
anything to do with this? Is yours on or off?

On Sun, 23 Jun 2019 12:05:22 -0400,
Bill White wrote:

I had an incident where the CMD as admin command wouldn't work properly.
Everybody else's machine worked in this respect. I called the Microsoft
Disability answer desk, and they did a reinstall of Windows using the ISO
file, and after the repair, my cmd as admin command would read properly.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard
Weitzel
Sent: Sunday, June 23, 2019 9:01 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I remember using the admin command prompt in 1809 and I don't think I ever
had any issues with Jaws not reading it, but it definitely reads it in
1903.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Saturday, June 22, 2019 11:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Jaws 2019 latest update.

On Sat, 22 Jun 2019 21:18:37 -0400,
Munawar Bijani wrote:

Hi,

I just tried elevating to Admin Command Prompt and JAWS reads it just
fine. What version of JAWS are you running?


I'm running an admin account with UAC set to the highest setting.

On 6/22/2019 8:01 PM, John Covici wrote:
Its only a problem in admin mode, running as administrator.

On Sat, 22 Jun 2019 19:34:00 -0400,
Munawar Bijani wrote:
Not sure why tech support says it's not supported. It has been
supported and reads well for as long as I can remymver. Sure about 10
years
ago jaws did horribly with command prompt but not in recent years.

On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com>
wrote:

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the
window, I see the text, but other wise nothing -- jaws cursor
reads nothing as well. Tech support says its not supported, but
that makes no sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question
is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com











--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Munawar Bijani <munawarb@...>
 

My legacy console option is off.

On 6/23/2019 1:02 PM, John Covici wrote:
I might have to try that, it does read if you virtualize the text,
which is strange. I wonder if the legacy console features have
anything to do with this? Is yours on or off?

On Sun, 23 Jun 2019 12:05:22 -0400,
Bill White wrote:
I had an incident where the CMD as admin command wouldn't work properly.
Everybody else's machine worked in this respect. I called the Microsoft
Disability answer desk, and they did a reinstall of Windows using the ISO
file, and after the repair, my cmd as admin command would read properly.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard
Weitzel
Sent: Sunday, June 23, 2019 9:01 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I remember using the admin command prompt in 1809 and I don't think I ever
had any issues with Jaws not reading it, but it definitely reads it in 1903.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Saturday, June 22, 2019 11:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Jaws 2019 latest update.

On Sat, 22 Jun 2019 21:18:37 -0400,
Munawar Bijani wrote:
Hi,

I just tried elevating to Admin Command Prompt and JAWS reads it just
fine. What version of JAWS are you running?


I'm running an admin account with UAC set to the highest setting.

On 6/22/2019 8:01 PM, John Covici wrote:
Its only a problem in admin mode, running as administrator.

On Sat, 22 Jun 2019 19:34:00 -0400,
Munawar Bijani wrote:
Not sure why tech support says it's not supported. It has been
supported and reads well for as long as I can remymver. Sure about 10 years
ago jaws did horribly with command prompt but not in recent years.
On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com>
wrote:
Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the
window, I see the text, but other wise nothing -- jaws cursor
reads nothing as well. Tech support says its not supported, but
that makes no sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com












Bill White <billwhite92701@...>
 

If you turn legacy console option on, you might have more success with JAWS reading in the CMD window, but you will also lose some of the newer features of CMD.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Munawar Bijani
Sent: Sunday, June 23, 2019 10:13 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

My legacy console option is off.

On 6/23/2019 1:02 PM, John Covici wrote:
I might have to try that, it does read if you virtualize the text,
which is strange. I wonder if the legacy console features have
anything to do with this? Is yours on or off?

On Sun, 23 Jun 2019 12:05:22 -0400,
Bill White wrote:
I had an incident where the CMD as admin command wouldn't work properly.
Everybody else's machine worked in this respect. I called the Microsoft
Disability answer desk, and they did a reinstall of Windows using the ISO
file, and after the repair, my cmd as admin command would read properly.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard
Weitzel
Sent: Sunday, June 23, 2019 9:01 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I remember using the admin command prompt in 1809 and I don't think I ever
had any issues with Jaws not reading it, but it definitely reads it in 1903.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Saturday, June 22, 2019 11:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Jaws 2019 latest update.

On Sat, 22 Jun 2019 21:18:37 -0400,
Munawar Bijani wrote:
Hi,

I just tried elevating to Admin Command Prompt and JAWS reads it just
fine. What version of JAWS are you running?


I'm running an admin account with UAC set to the highest setting.

On 6/22/2019 8:01 PM, John Covici wrote:
Its only a problem in admin mode, running as administrator.

On Sat, 22 Jun 2019 19:34:00 -0400,
Munawar Bijani wrote:
Not sure why tech support says it's not supported. It has been
supported and reads well for as long as I can remymver. Sure about 10 years
ago jaws did horribly with command prompt but not in recent years.
On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com>
wrote:
Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the
window, I see the text, but other wise nothing -- jaws cursor
reads nothing as well. Tech support says its not supported, but
that makes no sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com












Steve Nutt
 

You may have to set the command prompt to be legacy instead of using
PowerShell.

You can do this in CMD properties.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: 22 June 2019 19:52
To: jfw@groups.io
Subject: jaws does not work properly in admin command window

Hi. At least with version 1809, jfw will not read anything in the command
window if run as administrator. If I virtualize the window, I see the text,
but other wise nothing -- jaws cursor reads nothing as well. Tech support
says its not supported, but that makes no sense to me and Narrator reads it
fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Bill White <billwhite92701@...>
 

CMD and legacy are two different things. You first make sure you are using
CMD instead of power shell, then you go into CMD options and turn on legacy
console.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Steve Nutt
Sent: Sunday, June 23, 2019 11:52 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

You may have to set the command prompt to be legacy instead of using
PowerShell.

You can do this in CMD properties.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: 22 June 2019 19:52
To: jfw@groups.io
Subject: jaws does not work properly in admin command window

Hi. At least with version 1809, jfw will not read anything in the command
window if run as administrator. If I virtualize the window, I see the text,
but other wise nothing -- jaws cursor reads nothing as well. Tech support
says its not supported, but that makes no sense to me and Narrator reads it
fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


John Covici
 

I tried toggling the legacy checkbox, no joy. Works fine in regular
mode, but does not read in admin mode, although Narrator reads it fine
which leads me to think its a Jaws problem, but it seems only here.

On Sun, 23 Jun 2019 13:06:02 -0400,
Bill White wrote:

Once Microsoft repaired my copy of Windows, I didn't need the legacy
features of the Command console.

Bill White
billwhite92701@dslextreme.com


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John
Covici
Sent: Sunday, June 23, 2019 10:03 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I might have to try that, it does read if you virtualize the text,
which is strange. I wonder if the legacy console features have
anything to do with this? Is yours on or off?

On Sun, 23 Jun 2019 12:05:22 -0400,
Bill White wrote:

I had an incident where the CMD as admin command wouldn't work properly.
Everybody else's machine worked in this respect. I called the Microsoft
Disability answer desk, and they did a reinstall of Windows using the ISO
file, and after the repair, my cmd as admin command would read properly.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard
Weitzel
Sent: Sunday, June 23, 2019 9:01 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I remember using the admin command prompt in 1809 and I don't think I ever
had any issues with Jaws not reading it, but it definitely reads it in
1903.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Saturday, June 22, 2019 11:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Jaws 2019 latest update.

On Sat, 22 Jun 2019 21:18:37 -0400,
Munawar Bijani wrote:

Hi,

I just tried elevating to Admin Command Prompt and JAWS reads it just
fine. What version of JAWS are you running?


I'm running an admin account with UAC set to the highest setting.

On 6/22/2019 8:01 PM, John Covici wrote:
Its only a problem in admin mode, running as administrator.

On Sat, 22 Jun 2019 19:34:00 -0400,
Munawar Bijani wrote:
Not sure why tech support says it's not supported. It has been
supported and reads well for as long as I can remymver. Sure about 10
years
ago jaws did horribly with command prompt but not in recent years.

On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com>
wrote:

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the
window, I see the text, but other wise nothing -- jaws cursor
reads nothing as well. Tech support says its not supported, but
that makes no sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question
is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com











--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com








--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


John Covici
 

I want to be able to use powershell, so I am not sure what you mean,
the only thing I see in properties (using powershell) is one checkbox
to toggle legacy console features. However, my problem appears in
both powershell and regular cmd.

On Sun, 23 Jun 2019 14:52:07 -0400,
Steve Nutt wrote:

You may have to set the command prompt to be legacy instead of using
PowerShell.

You can do this in CMD properties.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: 22 June 2019 19:52
To: jfw@groups.io
Subject: jaws does not work properly in admin command window

Hi. At least with version 1809, jfw will not read anything in the command
window if run as administrator. If I virtualize the window, I see the text,
but other wise nothing -- jaws cursor reads nothing as well. Tech support
says its not supported, but that makes no sense to me and Narrator reads it
fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


 

I just opened Power Shell (Admin) from the Windows + X menu and typed ipconfig to display my computer's IP configuration and I can read this with the Jaws cursor.

----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Sunday, June 23, 2019 12:14 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I want to be able to use powershell, so I am not sure what you mean, the only thing I see in properties (using powershell) is one checkbox to toggle legacy console features. However, my problem appears in both powershell and regular cmd.

On Sun, 23 Jun 2019 14:52:07 -0400,
Steve Nutt wrote:

You may have to set the command prompt to be legacy instead of using
PowerShell.

You can do this in CMD properties.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: 22 June 2019 19:52
To: jfw@groups.io
Subject: jaws does not work properly in admin command window

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window, I
see the text, but other wise nothing -- jaws cursor reads nothing as
well. Tech support says its not supported, but that makes no sense to
me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


 

I also have Legacy off.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Sunday, June 23, 2019 10:15 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

If you turn legacy console option on, you might have more success with JAWS reading in the CMD window, but you will also lose some of the newer features of CMD.

Bill White
billwhite92701@dslextreme.com


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Munawar Bijani
Sent: Sunday, June 23, 2019 10:13 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

My legacy console option is off.

On 6/23/2019 1:02 PM, John Covici wrote:
I might have to try that, it does read if you virtualize the text,
which is strange. I wonder if the legacy console features have
anything to do with this? Is yours on or off?

On Sun, 23 Jun 2019 12:05:22 -0400,
Bill White wrote:
I had an incident where the CMD as admin command wouldn't work properly.
Everybody else's machine worked in this respect. I called the
Microsoft Disability answer desk, and they did a reinstall of Windows
using the ISO file, and after the repair, my cmd as admin command would read properly.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Sieghard Weitzel
Sent: Sunday, June 23, 2019 9:01 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I remember using the admin command prompt in 1809 and I don't think I
ever had any issues with Jaws not reading it, but it definitely reads it in 1903.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John
Covici
Sent: Saturday, June 22, 2019 11:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Jaws 2019 latest update.

On Sat, 22 Jun 2019 21:18:37 -0400,
Munawar Bijani wrote:
Hi,

I just tried elevating to Admin Command Prompt and JAWS reads it
just fine. What version of JAWS are you running?


I'm running an admin account with UAC set to the highest setting.

On 6/22/2019 8:01 PM, John Covici wrote:
Its only a problem in admin mode, running as administrator.

On Sat, 22 Jun 2019 19:34:00 -0400, Munawar Bijani wrote:
Not sure why tech support says it's not supported. It has been
supported and reads well for as long as I can remymver. Sure about 10
years ago jaws did horribly with command prompt but not in recent years.
On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com>
wrote:
Hi. At least with version 1809, jfw will not read anything in
the command window if run as administrator. If I virtualize the
window, I see the text, but other wise nothing -- jaws cursor
reads nothing as well. Tech support says its not supported, but
that makes no sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com












JM Casey
 

Hm, strange.
I have never had any issue with either regular cmd or powershell in admin
mode using JAWS. I tend to read output with the JAWS cursor. If I don't,
though, JAWS will just read the output of any particular command
automatically. I'm uh, still running 1803, though.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: June 23, 2019 3:05 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I tried toggling the legacy checkbox, no joy. Works fine in regular mode,
but does not read in admin mode, although Narrator reads it fine which leads
me to think its a Jaws problem, but it seems only here.

On Sun, 23 Jun 2019 13:06:02 -0400,
Bill White wrote:

Once Microsoft repaired my copy of Windows, I didn't need the legacy
features of the Command console.

Bill White
billwhite92701@dslextreme.com


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John
Covici
Sent: Sunday, June 23, 2019 10:03 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I might have to try that, it does read if you virtualize the text,
which is strange. I wonder if the legacy console features have
anything to do with this? Is yours on or off?

On Sun, 23 Jun 2019 12:05:22 -0400,
Bill White wrote:

I had an incident where the CMD as admin command wouldn't work properly.
Everybody else's machine worked in this respect. I called the
Microsoft Disability answer desk, and they did a reinstall of
Windows using the ISO file, and after the repair, my cmd as admin
command would read properly.

Bill White
billwhite92701@dslextreme.com

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Sieghard Weitzel
Sent: Sunday, June 23, 2019 9:01 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I remember using the admin command prompt in 1809 and I don't think
I ever had any issues with Jaws not reading it, but it definitely
reads it in
1903.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John
Covici
Sent: Saturday, June 22, 2019 11:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Jaws 2019 latest update.

On Sat, 22 Jun 2019 21:18:37 -0400,
Munawar Bijani wrote:

Hi,

I just tried elevating to Admin Command Prompt and JAWS reads it
just fine. What version of JAWS are you running?


I'm running an admin account with UAC set to the highest setting.

On 6/22/2019 8:01 PM, John Covici wrote:
Its only a problem in admin mode, running as administrator.

On Sat, 22 Jun 2019 19:34:00 -0400, Munawar Bijani wrote:
Not sure why tech support says it's not supported. It has been
supported and reads well for as long as I can remymver. Sure about
10
years
ago jaws did horribly with command prompt but not in recent years.

On Jun 22, 2019, at 2:51 PM, John Covici
<covici@ccs.covici.com>
wrote:

Hi. At least with version 1809, jfw will not read anything in
the command window if run as administrator. If I virtualize
the window, I see the text, but other wise nothing -- jaws
cursor reads nothing as well. Tech support says its not
supported, but that makes no sense to me and Narrator reads it
fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The
question
is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com




--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com











--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com








--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


JM Casey
 

Jeez, command prompt had better be supported, if nothing else is. Lol

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Munawar Bijani
Sent: June 22, 2019 7:34 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Not sure why tech support says it's not supported. It has been supported and
reads well for as long as I can remymver. Sure about 10 years ago jaws did
horribly with command prompt but not in recent years.

On Jun 22, 2019, at 2:51 PM, John Covici <covici@ccs.covici.com> wrote:

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window, I
see the text, but other wise nothing -- jaws cursor reads nothing as
well. Tech support says its not supported, but that makes no sense to
me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com