Topics

6

 

I have never seen Outlook put messages just into the Outbox folder if you press Send by default.
It would help to know which version of Office Michael is using and if he just has his Gmail account set up or if this is email under a different account.
Marty mentioned that this happens a lot with Office 2007 which would explain a lot, I am almost certain that with Office 2013 or even better Office 2016 this would not happen especially not with a Gmail account which is properly set up as an IMAP account. There is no more need to specify incoming and outgoing servers or ports and all that, but in older versions of Office and for POP accounts this is a problem.

Regards,
Sieghard

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tim Ford
Sent: Saturday, November 3, 2018 1:26 PM
To: main@jfw.groups.io
Subject: Re: 6

I used to have Outlook set this way, so I could batch my emails to help the slow Internet I had at the time. I believe the solution was to first press alt + s to "send it to the outbox, then control + m would trigger a complete Outlook refresh, including sending out the contents of the outbox. You can also set Outlook to send out messages without need for the extra control m command.

Tim

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Saturday, November 3, 2018 12:42 PM
To: main@jfw.groups.io
Subject: Re: 6

sounds like instead of Outlook sending the emails out after activating
the send button, it is sending the emails to the outgoing folder first,
effectively giving an opportunity to not send one or make changes before
their sent on their way. . since I don't use Outlook, my suggestion is
that there may very well be a setting to disable that behavior.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@...]
Sent: Saturday, Nov 3, 2018 1:45 PM EST
To: main@jfw.groups.io
Subject: 6

Try hitting alt+s when you are ready to send.

Richard

“Definition of an expert: An ex is a has-been and a spirt is a drip
under pressure.” – Bruce U. Utah Phillips

*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Michael Munn
*Sent:* Saturday, November 3, 2018 10:43 AM
*To:* main@jfw.groups.io
*Subject:* 6

Hi all, this is Michael and I have a question about using outlook to
send a message.

how can I send a message completely?

Every time when I'm done typing a message and press the send button it
won't send.

When I close Outlook the program ask me do I want to send this message
or unsend.

How ca n I send a message completely?

I was a Window-eyes user for a year.

I also new to Office.

Please respond if you all get any chance.

Best regards

Michael Munn

Tim Ford
 

I used to have Outlook set this way, so I could batch my emails to help the slow Internet I had at the time. I believe the solution was to first press alt + s to "send it to the outbox, then control + m would trigger a complete Outlook refresh, including sending out the contents of the outbox. You can also set Outlook to send out messages without need for the extra control m command.

Tim

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Saturday, November 3, 2018 12:42 PM
To: main@jfw.groups.io
Subject: Re: 6

sounds like instead of Outlook sending the emails out after activating
the send button, it is sending the emails to the outgoing folder first,
effectively giving an opportunity to not send one or make changes before
their sent on their way. . since I don't use Outlook, my suggestion is
that there may very well be a setting to disable that behavior.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@...]
Sent: Saturday, Nov 3, 2018 1:45 PM EST
To: main@jfw.groups.io
Subject: 6

Try hitting alt+s when you are ready to send.

Richard

“Definition of an expert: An ex is a has-been and a spirt is a drip
under pressure.” – Bruce U. Utah Phillips

*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Michael Munn
*Sent:* Saturday, November 3, 2018 10:43 AM
*To:* main@jfw.groups.io
*Subject:* 6

Hi all, this is Michael and I have a question about using outlook to
send a message.

how can I send a message completely?

Every time when I'm done typing a message and press the send button it
won't send.

When I close Outlook the program ask me do I want to send this message
or unsend.

How ca n I send a message completely?

I was a Window-eyes user for a year.

I also new to Office.

Please respond if you all get any chance.

Best regards

Michael Munn

Mario
 

sounds like instead of Outlook sending the emails out after activating
the send button, it is sending the emails to the outgoing folder first,
effectively giving an opportunity to not send one or make changes before
their sent on their way. . since I don't use Outlook, my suggestion is
that there may very well be a setting to disable that behavior.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@...]
Sent: Saturday, Nov 3, 2018 1:45 PM EST
To: main@jfw.groups.io
Subject: 6

Try hitting alt+s when you are ready to send.

Richard

“Definition of an expert: An ex is a has-been and a spirt is a drip
under pressure.” – Bruce U. Utah Phillips

*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Michael Munn
*Sent:* Saturday, November 3, 2018 10:43 AM
*To:* main@jfw.groups.io
*Subject:* 6

Hi all, this is  Michael and I have a question about using outlook to
send a message.

how can I send a message completely?

Every time when I'm done typing a message and press the send button it
won't send.

When I close Outlook the program ask me do I want to send this message
or unsend.

How ca n I send a message completely?

I was a Window-eyes user for a year.

I also new to Office.

Please respond if you all get any chance.

Best regards

Michael Munn

Marty Hutchings
 

Michael,  I have a similar problem sometimes with sending email from Windows Live Mail.  I add my signature and hit Alt+S to send the message and it just sits there.  My computer appears to be frozen, not allowing me to go to any other application.  I open Task Manager and tab to “Jump To” on Live Mail, then Alt+Tab to my message and hit Alt+S and now it will go like it is supposed to.  This seems to happen about 50% of the time.  I am running JAWS 18.03 and Windows 7 and Office 2007.
 
Love in Christ
Marty
 

Sent: Saturday, November 03, 2018 12:42 PM
Subject: 6
 
Hi all, this is  Michael and I have a question about using outlook to send a message.
how can I send a message completely?
Every time when I'm done typing a message and press the send button it won't send.
When I close Outlook the program ask me do I want to send this message or unsend.
How ca n I send a message completely?
I was a Window-eyes user for a year.
I also new to Office.
Please respond if you all get any chance.
Best regards
Michael Munn

 

Based on what you have said, it sounds like the login credentials required for your outgoing (SMTP) server are not correct.  Outlook tries to automatically send upon exit (or at least it does by default) and the messages you're getting indicate it's not sending because it cannot send.

Double check that the outgoing server settings in Outlook correspond to what your e-mail service provider says they should be.

--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

  If you remove all the homosexuals and homosexual influences from what is generally regarded as American culture, you are pretty much left with Let's Make a Deal.

          ~ Fran Lebowitz

Richard Turner
 

Try hitting alt+s when you are ready to send.

Richard

 

 

 

“Definition of an expert: An ex is a has-been and a spirt is a drip under pressure.” – Bruce U. Utah Phillips

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Michael Munn
Sent: Saturday, November 3, 2018 10:43 AM
To: main@jfw.groups.io
Subject: 6

 

Hi all, this is  Michael and I have a question about using outlook to send a message.

how can I send a message completely?

Every time when I'm done typing a message and press the send button it won't send.

When I close Outlook the program ask me do I want to send this message or unsend.

How ca n I send a message completely?

I was a Window-eyes user for a year.

I also new to Office.

Please respond if you all get any chance.

Best regards 

Michael Munn 

Michael Munn
 

Hi all, this is  Michael and I have a question about using outlook to send a message.
how can I send a message completely?
Every time when I'm done typing a message and press the send button it won't send.
When I close Outlook the program ask me do I want to send this message or unsend.
How ca n I send a message completely?
I was a Window-eyes user for a year.
I also new to Office.
Please respond if you all get any chance.
Best regards 
Michael Munn