Topics

font and format configuration


Michal Nowicki <mnowicki4@...>
 

Not a bad thought, but why bother when Ctrl Alt V is an option.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Onwardbob via
Jfw
Sent: Thursday, May 21, 2015 11:18 AM
To: 'The Jaws for Windows support list.'
Cc: Onwardbob
Subject: RE: font and format configuration

You could try first pasting your info into Notepad which would remove all
formatting. Then copy that and paste it into your Word doc. Just a thought!

BOB SOUTAR.ONWARD THRU THE FOG


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Drew
Hunthausen via Jfw
Sent: Thursday, May 21, 2015 8:50 AM
To: 'The Jaws for Windows support list.'
Cc: Drew Hunthausen
Subject: RE: font and format configuration

I just tried this and it does do what you are describing. What I remember
doing and what I want to do is to paste text from a web site or another
document into the one I am working on and have it format the text the same
as the rest of my document. I have an article I am writing where I am
pulling quotes from other places. Many of these quotes are formatted
differently and are hyper links in their origin. I need to be able to copy
and paste them into my document and have them be formatted like the rest of
the text. I remember doing this when I first started using word 2010 and it
was a life changer. Thanks so much

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ed Marquette
via Jfw
Sent: Thursday, May 21, 2015 1:05 AM
To: 'The Jaws for Windows support list.'
Cc: Ed Marquette
Subject: RE: font and format configuration

Here is one where it would potentially be helpful if we knew more about your
objective.
Instead of using control plus v, if you use control plus alt plus v, you get
an option every time as to the format you want. This works in both Word
2010 and Outlook 2010.
If you paste as text or Unicode text, everything takes on the font in effect
at the point where the paste takes place. There is also an option to paste
as formatted text -- as well as several other options pasting format .
In fact, I almost never use control plus v anymore.


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimsan via Jfw
Sent: Thursday, May 21, 2015 1:57 AM
To: 'The Jaws for Windows support list.'
Cc: Kimsan
Subject: RE: font and format configuration

As far as pasting goes, under the home ribbon there is a pasting option
where after pressing spacebar, it will ask if you want to paste text only,
paste special, or set default paste.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Drew
Hunthausen via Jfw
Sent: Wednesday, May 20, 2015 10:25 PM
To: Jaws list
Cc: Drew Hunthausen
Subject: font and format configuration

Dear list,

I'm wondering if someone can help me with how to change the copy and past/
cut and paste options in word 2010. I know that there is a way to have word
ask you what format you want to paste the text as, but I don't have that set
up and really need to get that option. Any help is greatly appreciated.



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachme
nts/201505
20/9910537e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Onwardbob
 

You could try first pasting your info into Notepad which would remove all
formatting. Then copy that and paste it into your Word doc. Just a thought!

BOB SOUTAR.ONWARD THRU THE FOG

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Drew
Hunthausen via Jfw
Sent: Thursday, May 21, 2015 8:50 AM
To: 'The Jaws for Windows support list.'
Cc: Drew Hunthausen
Subject: RE: font and format configuration

I just tried this and it does do what you are describing. What I remember
doing and what I want to do is to paste text from a web site or another
document into the one I am working on and have it format the text the same
as the rest of my document. I have an article I am writing where I am
pulling quotes from other places. Many of these quotes are formatted
differently and are hyper links in their origin. I need to be able to copy
and paste them into my document and have them be formatted like the rest of
the text. I remember doing this when I first started using word 2010 and it
was a life changer. Thanks so much

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ed Marquette
via Jfw
Sent: Thursday, May 21, 2015 1:05 AM
To: 'The Jaws for Windows support list.'
Cc: Ed Marquette
Subject: RE: font and format configuration

Here is one where it would potentially be helpful if we knew more about your
objective.
Instead of using control plus v, if you use control plus alt plus v, you get
an option every time as to the format you want. This works in both Word
2010 and Outlook 2010.
If you paste as text or Unicode text, everything takes on the font in effect
at the point where the paste takes place. There is also an option to paste
as formatted text -- as well as several other options pasting format .
In fact, I almost never use control plus v anymore.


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimsan via Jfw
Sent: Thursday, May 21, 2015 1:57 AM
To: 'The Jaws for Windows support list.'
Cc: Kimsan
Subject: RE: font and format configuration

As far as pasting goes, under the home ribbon there is a pasting option
where after pressing spacebar, it will ask if you want to paste text only,
paste special, or set default paste.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Drew
Hunthausen via Jfw
Sent: Wednesday, May 20, 2015 10:25 PM
To: Jaws list
Cc: Drew Hunthausen
Subject: font and format configuration

Dear list,

I'm wondering if someone can help me with how to change the copy and past/
cut and paste options in word 2010. I know that there is a way to have word
ask you what format you want to paste the text as, but I don't have that set
up and really need to get that option. Any help is greatly appreciated.



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachme
nts/201505
20/9910537e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Drew Hunthausen
 

I just tried this and it does do what you are describing. What I remember
doing and what I want to do is to paste text from a web site or another
document into the one I am working on and have it format the text the same
as the rest of my document. I have an article I am writing where I am
pulling quotes from other places. Many of these quotes are formatted
differently and are hyper links in their origin. I need to be able to copy
and paste them into my document and have them be formatted like the rest of
the text. I remember doing this when I first started using word 2010 and it
was a life changer. Thanks so much

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ed Marquette
via Jfw
Sent: Thursday, May 21, 2015 1:05 AM
To: 'The Jaws for Windows support list.'
Cc: Ed Marquette
Subject: RE: font and format configuration

Here is one where it would potentially be helpful if we knew more about your
objective.
Instead of using control plus v, if you use control plus alt plus v, you get
an option every time as to the format you want. This works in both Word
2010 and Outlook 2010.
If you paste as text or Unicode text, everything takes on the font in effect
at the point where the paste takes place. There is also an option to paste
as formatted text -- as well as several other options pasting format .
In fact, I almost never use control plus v anymore.


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimsan via Jfw
Sent: Thursday, May 21, 2015 1:57 AM
To: 'The Jaws for Windows support list.'
Cc: Kimsan
Subject: RE: font and format configuration

As far as pasting goes, under the home ribbon there is a pasting option
where after pressing spacebar, it will ask if you want to paste text only,
paste special, or set default paste.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Drew
Hunthausen via Jfw
Sent: Wednesday, May 20, 2015 10:25 PM
To: Jaws list
Cc: Drew Hunthausen
Subject: font and format configuration

Dear list,

I'm wondering if someone can help me with how to change the copy and past/
cut and paste options in word 2010. I know that there is a way to have word
ask you what format you want to paste the text as, but I don't have that set
up and really need to get that option. Any help is greatly appreciated.



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachme
nts/201505
20/9910537e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Drew Hunthausen
 

Thanks! I believe what I needed was the control plus alt plus v instead of
the control v. I'll try it and report back.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Ed Marquette
via Jfw
Sent: Thursday, May 21, 2015 1:05 AM
To: 'The Jaws for Windows support list.'
Cc: Ed Marquette
Subject: RE: font and format configuration

Here is one where it would potentially be helpful if we knew more about your
objective.
Instead of using control plus v, if you use control plus alt plus v, you get
an option every time as to the format you want. This works in both Word
2010 and Outlook 2010.
If you paste as text or Unicode text, everything takes on the font in effect
at the point where the paste takes place. There is also an option to paste
as formatted text -- as well as several other options pasting format .
In fact, I almost never use control plus v anymore.


-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Kimsan via Jfw
Sent: Thursday, May 21, 2015 1:57 AM
To: 'The Jaws for Windows support list.'
Cc: Kimsan
Subject: RE: font and format configuration

As far as pasting goes, under the home ribbon there is a pasting option
where after pressing spacebar, it will ask if you want to paste text only,
paste special, or set default paste.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Drew
Hunthausen via Jfw
Sent: Wednesday, May 20, 2015 10:25 PM
To: Jaws list
Cc: Drew Hunthausen
Subject: font and format configuration

Dear list,

I'm wondering if someone can help me with how to change the copy and past/
cut and paste options in word 2010. I know that there is a way to have word
ask you what format you want to paste the text as, but I don't have that set
up and really need to get that option. Any help is greatly appreciated.



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachme
nts/201505
20/9910537e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Ed Marquette <marquette.ed@...>
 

Here is one where it would potentially be helpful if we knew more
about your objective.
Instead of using control plus v, if you use control plus alt plus
v, you get an option every time as to the format you want. This
works in both Word 2010 and Outlook 2010.
If you paste as text or Unicode text, everything takes on the font
in effect at the point where the paste takes place. There is also
an option to paste as formatted text -- as well as several other
options pasting format .
In fact, I almost never use control plus v anymore.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of
Kimsan via Jfw
Sent: Thursday, May 21, 2015 1:57 AM
To: 'The Jaws for Windows support list.'
Cc: Kimsan
Subject: RE: font and format configuration

As far as pasting goes, under the home ribbon there is a pasting
option where after pressing spacebar, it will ask if you want to
paste text only, paste special, or set default paste.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Drew
Hunthausen via Jfw
Sent: Wednesday, May 20, 2015 10:25 PM
To: Jaws list
Cc: Drew Hunthausen
Subject: font and format configuration

Dear list,

I'm wondering if someone can help me with how to change the copy
and past/ cut and paste options in word 2010. I know that there is
a way to have word ask you what format you want to paste the text
as, but I don't have that set up and really need to get that
option. Any help is greatly appreciated.



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachme
nts/201505
20/9910537e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Kimsan <kimsansong@...>
 

As far as pasting goes, under the home ribbon there is a pasting option
where after pressing spacebar, it will ask if you want to paste text only,
paste special, or set default paste.

-----Original Message-----
From: Jfw [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Drew
Hunthausen via Jfw
Sent: Wednesday, May 20, 2015 10:25 PM
To: Jaws list
Cc: Drew Hunthausen
Subject: font and format configuration

Dear list,

I'm wondering if someone can help me with how to change the copy and past/
cut and paste options in word 2010. I know that there is a way to have word
ask you what format you want to paste the text as, but I don't have that set
up and really need to get that option. Any help is greatly appreciated.



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201505
20/9910537e/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Drew Hunthausen
 

Dear list,

I'm wondering if someone can help me with how to change the copy and past/
cut and paste options in word 2010. I know that there is a way to have word
ask you what format you want to paste the text as, but I don't have that set
up and really need to get that option. Any help is greatly appreciated.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20150520/9910537e/attachment.html>