Date   

moderated Re: Zoom question'

Mario
 

I don't know how helpful the following will be for what you're looking for, but it might be worth while to check it out:

JAWS and Zoom, a Lesson on Learning
https://www.freedomscientific.com/webinars/jaws-and-zoom-a-lesson-on-learning/

another resource that might be closer to what you want will cost $18, but is quite comprehensive:

https://carroll.org/product/getting-started-with-zoom-meetings/

On 10/4/2020 12:27 PM, Justin Mcdevitt wrote:
Hello Group,
Later this week, I am going to deliver a presentation through Zoom which I would like to record.
I know there is a Record button/option in the Zoom Menu. Is there anything that I need to be aware of in terms of setting up/activating in setting up the Record process?
In terms of the camera, I would just need to position it so it is focused on me as I am doing the presentation.
All help is appreciated.
Best, Justin


moderated Re: Working with multiple desktops in windows 10, using Jaws?

Jessica D
 

Hi,
Is there a way to make a blank desktop? 

Thanks,
Jessica 



On Oct 5, 2020, at 10:56 AM, Sieghard Weitzel <sieghard@...> wrote:



If you create a second, third or whatever desktop, it will create an exact copy of your main Desktop with all the icons.

What Desktops are for is to use them if you need to work with many applications, say you have 5 applicartions open for work, but you want to have a few apps or browser tabs open for personal use, you can then create a second desktop and do that there. Now switch back to Desktop 1 and continue to do your work stuff, when you want to do anything personal go to Desktop 2 where you can do that.

You can easily go back and forth between desktop 1 and 2 by pressing Windows Key + Control + Right or left arrow, e.g. if you are on desktop 2 and you want to go back to desktop 1, press Windows Key + Control + Left arrow, Jaws wills ay "Desktop 1", press Windows Key + Control + Right arrow when you are on Desktop 1 and Jaws will say Desktop 2 and that is where you now are.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Monday, October 5, 2020 7:38 AM
To: main@jfw.groups.io
Subject: Working with multiple desktops in windows 10, using Jaws?

 

Hi,

 

I created another desktop, to keep things tighty.

 

I’m wondering how to access this other desktop?

 

I did some research earlier, & found that you can press windows+tab, to access your list of virtual desktops.

Once I was in the list, jaws announced, “desktop 1” or “desktop 2” respectively.

 

However, when I pressed space on, “desktop 2” nothing seemed to happen, because I still saw my 28 icons, which are on my original desktop.

 

Can anyone tell me how to navigate this area of windows?

 

Thanks,

 

Jessica

 


moderated Re: Working with multiple desktops in windows 10, using Jaws?

 

If you create a second, third or whatever desktop, it will create an exact copy of your main Desktop with all the icons.

What Desktops are for is to use them if you need to work with many applications, say you have 5 applicartions open for work, but you want to have a few apps or browser tabs open for personal use, you can then create a second desktop and do that there. Now switch back to Desktop 1 and continue to do your work stuff, when you want to do anything personal go to Desktop 2 where you can do that.

You can easily go back and forth between desktop 1 and 2 by pressing Windows Key + Control + Right or left arrow, e.g. if you are on desktop 2 and you want to go back to desktop 1, press Windows Key + Control + Left arrow, Jaws wills ay "Desktop 1", press Windows Key + Control + Right arrow when you are on Desktop 1 and Jaws will say Desktop 2 and that is where you now are.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Monday, October 5, 2020 7:38 AM
To: main@jfw.groups.io
Subject: Working with multiple desktops in windows 10, using Jaws?

 

Hi,

 

I created another desktop, to keep things tighty.

 

I’m wondering how to access this other desktop?

 

I did some research earlier, & found that you can press windows+tab, to access your list of virtual desktops.

Once I was in the list, jaws announced, “desktop 1” or “desktop 2” respectively.

 

However, when I pressed space on, “desktop 2” nothing seemed to happen, because I still saw my 28 icons, which are on my original desktop.

 

Can anyone tell me how to navigate this area of windows?

 

Thanks,

 

Jessica

 


moderated Working with multiple desktops in windows 10, using Jaws?

Jessica D
 

Hi,

 

I created another desktop, to keep things tighty.

 

I’m wondering how to access this other desktop?

 

I did some research earlier, & found that you can press windows+tab, to access your list of virtual desktops.

Once I was in the list, jaws announced, “desktop 1” or “desktop 2” respectively.

 

However, when I pressed space on, “desktop 2” nothing seemed to happen, because I still saw my 28 icons, which are on my original desktop.

 

Can anyone tell me how to navigate this area of windows?

 

Thanks,

 

Jessica

 


moderated Re: Zoom question'

Marty Hutchings
 

I would recommend running a test meeting before your real meeting with just yourself and recording it to check your levels and your camera placement.
 
Love in Christ
Marty
If we view this present life as our primary goal, we will agree with William Shakespeare who said: “Life is a tale told by an idiot, full of sound and fury, signifying nothing.” From TODAY IN THE WORD June 1, 2020
 

Sent: Sunday, October 04, 2020 11:27 AM
Subject: Zoom question'
 

Hello Group,

Later this week, I am going to deliver a presentation through Zoom which I would like to record.

I know there is a Record button/option in the Zoom Menu. Is there anything that I need to be aware of in terms of setting up/activating in setting up the Record process?

In terms of the camera, I would just need to position it so it is focused on me as I am doing the presentation.

All help is appreciated.

 

Best, Justin 


moderated Re: I'm encountering a very strange sound card issue with trying to switch JAWS to an internal card.

Kevin Minor
 

Hi Orlando.

If you plug in headphones into the Yeti while Starting Windows, you'll hear your sounds through it. I agree, it's annoying, but at least I know what to do.

Kevin and Jilly the flying doggie

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Orlando Enrique Fiol via groups.io
Sent: Sunday, October 4, 2020 9:25 PM
To: main@jfw.groups.io
Subject: Re: I'm encountering a very strange sound card issue with trying to switch JAWS to an internal card.

At 12:28 PM 10/3/2020, Mike B wrote:
>To my knowledge, which isn't much, when playing music or system sounds they >have to come through the computers internal default sound card. I've never >been able to figure out how to make music and system sounds use the external >sound card so Jaws could be the only thing using the default internal >sound card. If someone can tell us how to do this I would be eternally >grateful as well.

Windows allows any registered device to play any application's audio, with the exception of system sounds, which are always mapped to the default audio device. So, if your media player shows up in the sound mixer applet or the old SNDVol control, you can have it play through any device you have. You can even have different media players or web browsers play through different audio devices from the default.

Thank God, your question has a simple answer. Speaking of Yeti, I have a Blue Yeti stereo USB microphone that sounds fantastic and has four polarity patterns. However, one of the "features" that probably seemed like a good idea to the Yeti's developers is proving to be a throbbing headache for me. The Yeti has a stereo eighth-inch headphone jack intended to allow users to monitor their mic output without intermediary devices. The problem is that this headphone output shows up in Windows as a Yeti speaker, which is, of course, a phantom silent device. Disabling it in its properties is the only way to keep it from appearing. Uninstalling it via the Device Manager only lasts until plug&play picks it up during the next reboot.
Most annoying of all, Windows defaults to this phantom Yeti device

during installations, in the advanced boot menu and safe mode. I've combed the registry for references to it. Why this phantom device would end up being the pre-Windows default boggles my mind, and there's apparently nothing I can do to make Windows use my USB audio device or the motherboard's sound card to run narrator before Windows proper loads.
My only workaround is to unplug the Yeti from its USB port whenever I know I'll be using Narrator before Windows loads with my actual sound configuration.
Riddle me all this, my fellow blind geniuses!
Orlando Enrique Fiol
Charlotte, North Carolina
Professional Pianist/Keyboardist, Percussionist and Pedagogue


moderated Re: Zoom question'

curtis jackson
 

Alt r will start and stop recording


On Oct 4, 2020, at 6:56 PM, Justin Mcdevitt <jhmcdev@...> wrote:



Hello Group,

Later this week, I am going to deliver a presentation through Zoom which I would like to record.

I know there is a Record button/option in the Zoom Menu. Is there anything that I need to be aware of in terms of setting up/activating in setting up the Record process?

In terms of the camera, I would just need to position it so it is focused on me as I am doing the presentation.

All help is appreciated.

 

Best, Justin  


moderated Re: I'm encountering a very strange sound card issue with trying to switch JAWS to an internal card.

Orlando Enrique Fiol
 

At 10:01 AM 10/3/2020, Kevin Minor wrote:
I have no idea what's going on. Yesterday I purchased a Yeti USB mic.
It has a built in sound card, so I can route other sounds to it. I
thought it would be nice to listen to music through the Yeti and have
JAWS come out my external card. Well, it would be nice, except it
doesn't work. I tried this, and JAWS goes silent. I have to set it to
either the Yeti or the default device to get speech back. If I change
the Windows default sound to my internal card, all is well.
Any ideas?
If your Blue Yeti is the same as mind, its built-in sound card is only intended for its own input, not input from Windows applications. The only way you'll get sound out of the Yeti is through headphones plugged into its 8-inch jack on the microphone's bottom.
Your problem is the same as mine: the Yeti shows up in Windows asas both a microphone (which it is) and a speaker (which it ain't). I'm somewhat curious now to plug headphones into the Yeti, assign JaWS to it and listen for any sound.
This phantom Yeti speaker is exactly what I get whenever Narrator runs before my Windows user profile and sound configuration load.


Orlando


moderated Re: I'm encountering a very strange sound card issue with trying to switch JAWS to an internal card.

Orlando Enrique Fiol
 

At 04:53 PM 10/3/2020, Kevin Minor wrote:
I have the Yeti as the default card, and when I go into
JAWS and set it to my PC internal card, I lose speech. Same thing
happens if I have the PC as the default, and I set JAWS to use the
Yeti: no speech.
When ou lose speech with the Yeti, is it able to play other audio, or does it stay silent? You may want to try changing its sampling rate in its advanced properties and unchecking the box allowing applications to take exclusive control of it.

Orlando Enrique Fiol
Charlotte, North Carolina


moderated Re: I'm encountering a very strange sound card issue with trying to switch JAWS to an internal card.

Orlando Enrique Fiol
 

At 12:28 PM 10/3/2020, Mike B wrote:
To my knowledge, which isn't much, when playing music or system sounds they
have to come through the computers internal default sound card. I've never
been able to figure out how to make music and system sounds use the external
sound card so Jaws could be the only thing using the default internal
sound card. If someone can tell us how to do this I would be eternally
grateful as well.
Windows allows any registered device to play any application's audio, with the exception of system sounds, which are always mapped to the default audio device. So, if your media player shows up in the sound mixer applet or the old SNDVol control, you can have it play through any device you have. You can even have different media players or web browsers play through different audio devices from the default.

Thank God, your question has a simple answer. Speaking of Yeti, I have a Blue Yeti stereo USB microphone that sounds fantastic and has four polarity patterns. However, one of the "features" that probably seemed like a good idea to the Yeti's developers is proving to be a throbbing headache for me. The Yeti has a stereo eighth-inch headphone jack intended to allow users to monitor their mic output without intermediary devices. The problem is that this headphone output shows up in Windows as a Yeti speaker, which is, of course, a phantom silent device. Disabling it in its properties is the only way to keep it from appearing. Uninstalling it via the Device Manager only lasts until plug&play picks it up during the next reboot.
Most annoying of all, Windows defaults to this phantom Yeti device

during installations, in the advanced boot menu and safe mode. I've combed the registry for references to it. Why this phantom device would end up being the pre-Windows default boggles my mind, and there's apparently nothing I can do to make Windows use my USB audio device or the motherboard's sound card to run narrator before Windows proper loads.
My only workaround is to unplug the Yeti from its USB port whenever I know I'll be using Narrator before Windows loads with my actual sound configuration.
Riddle me all this, my fellow blind geniuses!
Orlando Enrique Fiol
Charlotte, North Carolina
Professional Pianist/Keyboardist, Percussionist and Pedagogue


moderated vm ware query

Marvin Hunkin
 

Hi. Got a unnatend file and then also have the audio command in that. Now got a windows server 2016 iso inside vmware workstation. Is there an easy way to add the auto file to the windows server iso. Have tried googling and still not finding an answer.  Talking installer for windows server.

Thanks.No

 


moderated Zoom question'

Justin Mcdevitt
 

Hello Group,

Later this week, I am going to deliver a presentation through Zoom which I would like to record.

I know there is a Record button/option in the Zoom Menu. Is there anything that I need to be aware of in terms of setting up/activating in setting up the Record process?

In terms of the camera, I would just need to position it so it is focused on me as I am doing the presentation.

All help is appreciated.

 

Best, Justin  


moderated Re: Go to next link, whether visited or not

 

Also, if the only controls on the page are links, tab or shift+tab will take you to the next/previous instance regardless of whether said instance has been visited or not.

I realize that many pages have other types of controls interspersed on the page, in which case I'd definitely try Mr. Spratt's recommendation of using the links list, but if you know you have a page that is exclusively links or where other controls are either before or after the "link rich zone" you can use TAB and SHIFT+TAB once you're "in the zone."
--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: Go to next link, whether visited or not

Richard Turner
 

Mark,

You may want to check out the Navigation quick keys

Open the Jaws window with insert+j

Tap alt.

Right arrow to utilities, and down arrow to Navigation Quick Key Manager sub menu, right arrow to open it.

Press enter on HTML/PDF...

Press the letter a until you land on: Any Link.  Tab to edit key assignment.

I use links far more than lists, so I set this to the letter l.  It will warn you of a key already assigned.  If you want to do that, just hit OK.  And hit ok until you are out of the dialogs.

Then, you can use l or shift+l to jump to the next or previous link no matter if it is visited or unvisited.


HTH,



 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Adrian Spratt
Sent: Sunday, October 4, 2020 8:18 AM
To: main@jfw.groups.io
Subject: Re: Go to next link, whether visited or not

 

Pressing insert-F7 brings up a list of the links on the webpage, and they’re shown in succession. If your focus is on the current link, chances are that opening the links list there will place you in the list at or near that link and the next. I find this varies by website.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mark
Sent: Sunday, October 4, 2020 9:09 AM
To: main@jfw.groups.io
Subject: Go to next link, whether visited or not

 

I'm on web content where I want to go to the next link. However, I don't know whether it is a visited or unvisited link.
Is there a navigation quick key to move to the next link, whether it is visited or not? The tab key goes to the next focusable item, and there could be several buttons or input fields between the Virtual PC cursor and the next link.

I've searched the documentation and this list for any existing help. Couldn't find any.


moderated Re: I'm encountering a very strange sound card issue with trying to switch JAWS to an internal card.

Mario
 

okay, check which sound card JAWS is set to speak thru, and do post if it worked or not.

On 10/3/2020 4:34 PM, Kevin Minor wrote:
Hi again.
I'm not sure if I'm in the same place, but in the Volume Control, I select the Yeti as the playback device. There's a Set to Default button. I hit that, and sounds come through the headphones I have plugged into the Yeti.
Kevin and Jilly the flying doggie
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Saturday, October 3, 2020 4:32 PM
To: main@jfw.groups.io
Subject: Re: I'm encountering a very strange sound card issue with trying to switch JAWS to an internal card.
check if the Yetti is set as the default playback device (system default). if it is not, there is a default button when focused on the Yetti.
On 10/3/2020 4:23 PM, Mario wrote:
you can't listen to music thru the Yeti because it is a microphone, an
input device for audio. if JAWS is lost after plugging in the Yeti,
take a look at what sound card JAWS is set to speak out of:

using NVDA or even Narrator, press insert+j to gain focus to the JAWS
user interface:

if JAWS is running as a service (from the systray:
down arrow to and right arrow to utilities, down arrow to and right
arrow on sound card.

if JAWS is set to run as an application (found in the alt+tab sequence):
press alt,
right arrow to and down arrow on utilities, down arrow to and enter on
sound card.

one of the recognized sound cards (playback devices) will be checked
which will indicate which sound card JAWS will speak out of.
press enter on the sound card you want JAWS to speak out of.

unload NVDA or Narrator if JAWS is speaking again.

On 10/3/2020 3:33 PM, Marty Hutchings wrote:
Mike,  I have done this, but I just went through my Control Panel to
find how I did this, but I am baffled.  Sucks getting old.
Love in Christ
Marty
If we view this present life as our primary goal, we will agree with
William Shakespeare who said: “Life is a tale told by an idiot, full
of sound and fury, signifying nothing.” From TODAY IN THE WORD June
1,
2020
*From:* Mike B <mailto:mb69mach1@...>
*Sent:* Saturday, October 03, 2020 11:28 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: I'm encountering a very strange sound card issue with
trying to switch JAWS to an internal card.
Hi Kevin,
To my knowledge, which isn't much, when playing music or system
sounds they have to come through the computers internal default soundcard.
I've never been able to figure out how to make music and system
sounds use the external soundcard so Jaws could be the only thing
using the default internal soundcard.  If someone can tell us how to
do this I would be eternally grateful as well.

Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!
----- Original Message -----
*From:* Kevin Minor <mailto:kminor65@...>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Saturday, October 03, 2020 7:19 AM
*Subject:* Re: I'm encountering a very strange sound card issue with
trying to switch JAWS to an internal card.

Hi Richard.

I’m using the latest JAWS 2020, Eloquence, I think Reed. It’s with
Windows 10 2004, latest build.

Kevin and Jilly the flying doggie

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of
*Richard Turner
*Sent:* Saturday, October 3, 2020 10:15 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: I'm encountering a very strange sound card issue with
trying to switch JAWS to an internal card.

Which Jaws synthesizer and voice are you using?

Richard

"He that cannot forgive others breaks the bridge over which he must
pass himself,” and we forget that only grace can break the cycle of
ancient hatreds among peoples. (It is notable that while I have
regretted not granting grace to others, I’ve never once regretted
extending it.)" - Edward Herbert

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Kevin
Minor
*Sent:* Saturday, October 3, 2020 7:14 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: I'm encountering a very strange sound card issue with
trying to switch JAWS to an internal card.

Hi Richard.

You’re right about being confused. I want to hear music through the
Yeti, and JAWS through the built in sound card in my laptop. In any
case, it doesn’t work, at least I can’t figure what’s wrong.

Kevin and Jilly the flying doggie

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of
*Richard Turner
*Sent:* Saturday, October 3, 2020 10:10 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: I'm encountering a very strange sound card issue with
trying to switch JAWS to an internal card.

It is early in the morning, so I may just be a little dense, you said:
“I thought it would be nice to listen to music through the Yeti and
have JAWS come out my external card.”,  but isn’t the Yeti your
external card?

Or do you have a different external card?

If you listen to music through the Yeti, wouldn’t you use the default
internal sound card for Jaws?

Also confused,

Richard

"He that cannot forgive others breaks the bridge over which he must
pass himself,” and we forget that only grace can break the cycle of
ancient hatreds among peoples. (It is notable that while I have
regretted not granting grace to others, I’ve never once regretted
extending it.)" - Edward Herbert

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Kevin
Minor
*Sent:* Saturday, October 3, 2020 7:02 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* I'm encountering a very strange sound card issue with
trying to switch JAWS to an internal card.

Hi.

I have no idea what’s going on. Yesterday I purchased a Yeti USB mic.
It has a built in sound card, so I can route other sounds to it. I
thought it would be nice to listen to music through the Yeti and have
JAWS come out my external card. Well, it would be nice, except it
doesn’t work. I tried this, and JAWS goes silent. I have to set it to
either the Yeti or the default device to get speech back. If I change
the Windows default sound to my internal card, all is well.

Any ideas?

Kevin and Jilly the flying doggie





.


moderated Re: I'm encountering a very strange sound card issue with trying to switch JAWS to an internal card.

Kevin Minor
 

Hi.

The Yeti has a sound card as part of it. I'm currently hearing JAWS, as well as all other Windows sounds through it.

Currently, JAWS is set to the Windows default source as its sound card. The Yeti is also a choice in this menu.

Kevin and Jilly the flying doggie

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Saturday, October 3, 2020 4:24 PM
To: main@jfw.groups.io
Subject: Re: I'm encountering a very strange sound card issue with trying to switch JAWS to an internal card.

you can't listen to music thru the Yeti because it is a microphone, an input device for audio. if JAWS is lost after plugging in the Yeti, take a look at what sound card JAWS is set to speak out of:

using NVDA or even Narrator, press insert+j to gain focus to the JAWS user interface:

if JAWS is running as a service (from the systray:
down arrow to and right arrow to utilities, down arrow to and right arrow on sound card.

if JAWS is set to run as an application (found in the alt+tab sequence):
press alt,
right arrow to and down arrow on utilities, down arrow to and enter on sound card.

one of the recognized sound cards (playback devices) will be checked which will indicate which sound card JAWS will speak out of.
press enter on the sound card you want JAWS to speak out of.

unload NVDA or Narrator if JAWS is speaking again.

On 10/3/2020 3:33 PM, Marty Hutchings wrote:
Mike,  I have done this, but I just went through my Control Panel to
find how I did this, but I am baffled.  Sucks getting old.
Love in Christ
Marty
If we view this present life as our primary goal, we will agree with
William Shakespeare who said: “Life is a tale told by an idiot, full
of sound and fury, signifying nothing.” From TODAY IN THE WORD June 1,
2020
*From:* Mike B <mailto:mb69mach1@...>
*Sent:* Saturday, October 03, 2020 11:28 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: I'm encountering a very strange sound card issue with
trying to switch JAWS to an internal card.
Hi Kevin,
To my knowledge, which isn't much, when playing music or system sounds
they have to come through the computers internal default soundcard.
I've never been able to figure out how to make music and system sounds
use the external soundcard so Jaws could be the only thing using the
default internal soundcard.  If someone can tell us how to do this I
would be eternally grateful as well.

Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!
----- Original Message -----
*From:* Kevin Minor <mailto:kminor65@...>
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Sent:* Saturday, October 03, 2020 7:19 AM
*Subject:* Re: I'm encountering a very strange sound card issue with
trying to switch JAWS to an internal card.

Hi Richard.

I’m using the latest JAWS 2020, Eloquence, I think Reed. It’s with
Windows 10 2004, latest build.

Kevin and Jilly the flying doggie

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of
*Richard Turner
*Sent:* Saturday, October 3, 2020 10:15 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: I'm encountering a very strange sound card issue with
trying to switch JAWS to an internal card.

Which Jaws synthesizer and voice are you using?

Richard

"He that cannot forgive others breaks the bridge over which he must
pass himself,” and we forget that only grace can break the cycle of
ancient hatreds among peoples. (It is notable that while I have
regretted not granting grace to others, I’ve never once regretted
extending it.)" - Edward Herbert

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Kevin
Minor
*Sent:* Saturday, October 3, 2020 7:14 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: I'm encountering a very strange sound card issue with
trying to switch JAWS to an internal card.

Hi Richard.

You’re right about being confused. I want to hear music through the
Yeti, and JAWS through the built in sound card in my laptop. In any
case, it doesn’t work, at least I can’t figure what’s wrong.

Kevin and Jilly the flying doggie

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of
*Richard Turner
*Sent:* Saturday, October 3, 2020 10:10 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: I'm encountering a very strange sound card issue with
trying to switch JAWS to an internal card.

It is early in the morning, so I may just be a little dense, you said:
“I thought it would be nice to listen to music through the Yeti and
have JAWS come out my external card.”,  but isn’t the Yeti your external card?

Or do you have a different external card?

If you listen to music through the Yeti, wouldn’t you use the default
internal sound card for Jaws?

Also confused,

Richard

"He that cannot forgive others breaks the bridge over which he must
pass himself,” and we forget that only grace can break the cycle of
ancient hatreds among peoples. (It is notable that while I have
regretted not granting grace to others, I’ve never once regretted
extending it.)" - Edward Herbert

*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Kevin
Minor
*Sent:* Saturday, October 3, 2020 7:02 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* I'm encountering a very strange sound card issue with
trying to switch JAWS to an internal card.

Hi.

I have no idea what’s going on. Yesterday I purchased a Yeti USB mic.
It has a built in sound card, so I can route other sounds to it. I
thought it would be nice to listen to music through the Yeti and have
JAWS come out my external card. Well, it would be nice, except it
doesn’t work. I tried this, and JAWS goes silent. I have to set it to
either the Yeti or the default device to get speech back. If I change
the Windows default sound to my internal card, all is well.

Any ideas?

Kevin and Jilly the flying doggie


moderated Re: Go to next link, whether visited or not

Adrian Spratt
 

Pressing insert-F7 brings up a list of the links on the webpage, and they’re shown in succession. If your focus is on the current link, chances are that opening the links list there will place you in the list at or near that link and the next. I find this varies by website.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mark
Sent: Sunday, October 4, 2020 9:09 AM
To: main@jfw.groups.io
Subject: Go to next link, whether visited or not

 

I'm on web content where I want to go to the next link. However, I don't know whether it is a visited or unvisited link.
Is there a navigation quick key to move to the next link, whether it is visited or not? The tab key goes to the next focusable item, and there could be several buttons or input fields between the Virtual PC cursor and the next link.

I've searched the documentation and this list for any existing help. Couldn't find any.


moderated Re: Go to next link, whether visited or not

Mike B
 


Hi Mark,
 
Pressing, Insert + H, brings up the list below while in your browser of choice.  Unvisited and Visited link keys are marked with 2 stars.
 
Go Back a page, ALT+LEFT ARROW.
Read the Address bar, INSERT+A.
Next link, TAB.
Prior link, SHIFT+TAB.
Open a link, ENTER.
Display a list of links, Insert+F7.
Display and manage PlaceMarkers, Control+Shift+k.
Display a list of form fields, JAWSKey+F5.
Display a list of headings, Insert+F6.
Display a list of frames, JAWSKey+F9.
 
To move through a web page:
Next Radio Button, A.
Next Button, B.
Next ComboBox, C.
Next different element, D.
Next Edit, E.
Next Form Field, F.
Next Graphic, G.
Next Heading, H.
Next List Item, I.
Jump to a specific line with J,
And return to the starting point before the jump with Shift+J.
Next Place Marker, K.
Next List, L.
Next Frame, M.
Skip past links, N.
Next Object, O.
Next Paragraph, P.
Next Main Region, Q.
Next Region, R.
Next Same Element, S.
Next Table, T.
**Next unvisited link, U.
**Next visited link, V.
Next Checkbox, X.
Next Span element, Y.
Next Division, Z.
Next OnMouseOver element, ; (semicolon).
Next element with an onclick handler, / (slash).
Next MailTo link, \ (backslash).
Next Separator, - (Dash).
Next FlowTo element, = (Equals).
Add SHIFT to these commands to move to the prior item.
 
Step past element, > (greater than).
Step prior to element, < (less than).
 
Add Control+JAWSKey to the applicable quick keys to bring up a list of that element,
For example, Control+JAWSKey+z will bring up a list of the divisions on the page.
 
To move and read in tables:
Next row, WINDOWS KEY+Alt+DOWN ARROW.
Prior row, WINDOWS KEY+Alt+UP ARROW.
Read Row, WINDOWS KEY+ALT+COMMA.
Next column, WINDOWS KEY+Alt+RIGHT ARROW.
Prior column, WINDOWS KEY+Alt+LEFT ARROW.
Read Column, WINDOWS KEY+ALT+PERIOD.
Next cell in a row, ALT+CTRL+RIGHT ARROW.
Prior cell in a row, ALT+CTRL+LEFT ARROW.
Cell below in a column, ALT+CTRL+DOWN ARROW.
Cell above in a column, ALT+CTRL+Up ARROW.
Jump to cell,Control+Windows+j.
 
Visit JAWS help for more information.
Press and hold INSERT, then press F1 twice quickly to open help directly to the Internet Explorer topic. Press F6 to move into the help topic window.

Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!

----- Original Message -----
From: Mark
Sent: Sunday, October 04, 2020 6:08 AM
Subject: Go to next link, whether visited or not

I'm on web content where I want to go to the next link. However, I don't know whether it is a visited or unvisited link.
Is there a navigation quick key to move to the next link, whether it is visited or not? The tab key goes to the next focusable item, and there could be several buttons or input fields between the Virtual PC cursor and the next link.

I've searched the documentation and this list for any existing help. Couldn't find any.


moderated Go to next link, whether visited or not

Mark
 

I'm on web content where I want to go to the next link. However, I don't know whether it is a visited or unvisited link.
Is there a navigation quick key to move to the next link, whether it is visited or not? The tab key goes to the next focusable item, and there could be several buttons or input fields between the Virtual PC cursor and the next link.

I've searched the documentation and this list for any existing help. Couldn't find any.


moderated Re: How do i sync my desktope across multiple computers, using oneDrive?

Randy Barnett
 

I forgot to mention, that you can do this for all your documents downloads favorites folders and if you ever lose your hard drive they’ll all be on one drive and when you reinstall windows you just point them at the one drive folder after it downloads and it’ll all be back just like it was before.

Randy Barnett

On Oct 3, 2020, at 6:19 PM, Jessica D <jldail13@...> wrote:



Hi,

 

I want to sync the contents of my desktop across multiple computers, using OneDrive.

 

I already have a “desktop” folder in my OneDrive.

 

Can anyone help me from there?

 

Thanks,

 

Jessica