Date   

need a visio 2016 trial download and setup file

Marvin Hunkin <neilmarvin@...>
 

Hi. do you have the setup file and for some stupid reason when trying to set up, would not let me create an account, did not like the company name and then would not do that on google chrome, then tried firefox and would not like the company phone and did get that, and then would not call my landline. Do you have a trial version and where I can download the setup, from one drive.

Thanks.

 


Virus-free. www.avast.com


Re: labeling buttons on webpage

Bill White
 

All I know is to press JAWS key plus F2, arrow down to create prompt.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Friday, September 28, 2018 12:34 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

Hi bill:

I tried the key combination ctrl+jaws+tab and it brought me to the label box that I saw whenst I pressed jaws+f2?

Is there some other combination for prompting?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, September 27, 2018 5:35 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

You shouldn’t need to do that. There’s also another function in JAWS which might work in your situation.

 

Creating a Prompt

 

To create a prompt:

 

Move to the control for which the prompt is not properly spoken.

Press CTRL+INSERT+TAB.

A dialog box appears to walk you through the creation of the prompt. On the first page, enter the prompt for the control as you want JAWS to speak it,

and then select Next.

On the second page, enter the prompt for the control as you want JAWS to display it in Braille, and then select Next.

On the third page, specify a Tutor message to provide assistance with navigation or the use of this control. If you leave the Tutor message blank, the

default message is used. Select Finish to create your prompt.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 1:21 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

Ok, do I have to restart jaws, or, reload the webpage for it to recognize the new labels?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, September 27, 2018 4:16 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

It should label the button as a Personal Web setting, and should work with the Virtual cursor as well as JAWS cursor.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 12:32 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

thanks Bill for the prompt response.
I went and did as you prescribed,
It took the label and I hit OK and then when I Erold back across the button it’s still sad and label zero button.
My question then is does this feature work when you are on the webpage with using the virtual cursor?
Or does it only work when you’re using the web page with the jars virtual cursor turn off?

 

contact information
Mike McGlashon
PH: 618-783-9331
Email: michael.mcglashon@...


On Sep 27, 2018, at 2:48 PM, Bill White <billwhite92701@...> wrote:

Hi, Mike.

 

How to Make Custom Labels

 

This is appropriate for labeling buttons.

 

1. Put focus on the item you want to label.

2. Press jaws + F2.

3. Arrow to custom label. This will open a window that allows you to assign a label that makes sense.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 11:19 AM
To: main@jfw.groups.io
Subject: labeling buttons on webpage

 

Hey guys:

I seem to remember that there was a thread on here regarding labeling “unlabeled 0” buttons on webpages?

Is there a way to have jaws say something else whenst I figure out what the button does?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 


Re: labeling buttons on webpage

mike mcglashon
 

Hi bill:

I tried the key combination ctrl+jaws+tab and it brought me to the label box that I saw whenst I pressed jaws+f2?

Is there some other combination for prompting?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, September 27, 2018 5:35 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

You shouldn’t need to do that. There’s also another function in JAWS which might work in your situation.

 

Creating a Prompt

 

To create a prompt:

 

Move to the control for which the prompt is not properly spoken.

Press CTRL+INSERT+TAB.

A dialog box appears to walk you through the creation of the prompt. On the first page, enter the prompt for the control as you want JAWS to speak it,

and then select Next.

On the second page, enter the prompt for the control as you want JAWS to display it in Braille, and then select Next.

On the third page, specify a Tutor message to provide assistance with navigation or the use of this control. If you leave the Tutor message blank, the

default message is used. Select Finish to create your prompt.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 1:21 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

Ok, do I have to restart jaws, or, reload the webpage for it to recognize the new labels?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, September 27, 2018 4:16 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

It should label the button as a Personal Web setting, and should work with the Virtual cursor as well as JAWS cursor.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 12:32 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

thanks Bill for the prompt response.
I went and did as you prescribed,
It took the label and I hit OK and then when I Erold back across the button it’s still sad and label zero button.
My question then is does this feature work when you are on the webpage with using the virtual cursor?
Or does it only work when you’re using the web page with the jars virtual cursor turn off?

 

contact information
Mike McGlashon
PH: 618-783-9331
Email: michael.mcglashon@...


On Sep 27, 2018, at 2:48 PM, Bill White <billwhite92701@...> wrote:

Hi, Mike.

 

How to Make Custom Labels

 

This is appropriate for labeling buttons.

 

1. Put focus on the item you want to label.

2. Press jaws + F2.

3. Arrow to custom label. This will open a window that allows you to assign a label that makes sense.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 11:19 AM
To: main@jfw.groups.io
Subject: labeling buttons on webpage

 

Hey guys:

I seem to remember that there was a thread on here regarding labeling “unlabeled 0” buttons on webpages?

Is there a way to have jaws say something else whenst I figure out what the button does?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 


Re: Accessing attachments in outlook 2016

Kimber Gardner
 

Thank you Bill, it looks like that is exactly what I needed to do.
Once attachment preview was turned off I was able to tab to my
attachments in both the emails where I was failing before.

Kim

On 9/28/18, Bill White <billwhite92701@...> wrote:
Hi, Kim. One thing you want to make sure of is that "turn off Attachment
Preview is checked. This is in Outlook Options under Trust Center. Once you
open Trust Center, press ALT plus T for Trust Center Settings. Arrow to
Attachment Handling, then TAB to the Turn Off Attachment Preview, make sure
it is checked, then TAB to the OK button in Trust center.

Having Attachment Preview turned off makes it easier to Right and Left Arrow
through your list of attachments.

If you feel more comfortable with someone on the phone with you while you
explore these options, you may call me between nine AM and nine PM Pacific
Time. My number is:

714-835-6295

Bill White

billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimber
Gardner
Sent: Friday, September 28, 2018 3:58 AM
To: main@jfw.groups.io
Subject: Re: Accessing attachments in outlook 2016

Hi Ann,

Unfortunately, in this case, insert A doesn't work. When I press
insert A Jaws says "no attachments" even though I know for a fact that
there are attachments. I tried this on several emails and never was
able to reach the attachments.

Thanks,
Kim

On 9/27/18, Ann Byrne <annakb@...> wrote:
Insert+a shows the list of attachments. Tab to the 'open' button and
press enter. Read to your heart's content.





--
Kimberly









--
Kimberly


Re: Accessing attachments in outlook 2016

Bill White
 

Hi, Kim. One thing you want to make sure of is that "turn off Attachment Preview is checked. This is in Outlook Options under Trust Center. Once you open Trust Center, press ALT plus T for Trust Center Settings. Arrow to Attachment Handling, then TAB to the Turn Off Attachment Preview, make sure it is checked, then TAB to the OK button in Trust center.

Having Attachment Preview turned off makes it easier to Right and Left Arrow through your list of attachments.

If you feel more comfortable with someone on the phone with you while you explore these options, you may call me between nine AM and nine PM Pacific Time. My number is:

714-835-6295

Bill White

billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimber Gardner
Sent: Friday, September 28, 2018 3:58 AM
To: main@jfw.groups.io
Subject: Re: Accessing attachments in outlook 2016

Hi Ann,

Unfortunately, in this case, insert A doesn't work. When I press
insert A Jaws says "no attachments" even though I know for a fact that
there are attachments. I tried this on several emails and never was
able to reach the attachments.

Thanks,
Kim

On 9/27/18, Ann Byrne <annakb@...> wrote:
Insert+a shows the list of attachments. Tab to the 'open' button and
press enter. Read to your heart's content.





--
Kimberly


Re: Problem when switching to a folder in Outlook 2016

Richard Turner
 

When closing an Email, you ought to be back in the inbox.  Perhaps on that issue, calling Microsoft accessibility to figure out what setting is causing you to not be back in the inbox would be worth while.

But, there are standard Microsoft hotkeys to switch between folders:

Control_1 inbox

Control-2 Calendar

Control-3 contacts

Control-4 ToDo list

Control-5 Notes

 

Microsoft accessibility 800-936-5900.

 

HTH,

Richard

 

 

 

 

“Definition of an expert: An ex is a has-been and a spirt is a drip under pressure.” – Bruce U. Utah Phillips

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Stan Holdeman
Sent: Friday, September 28, 2018 7:19 AM
To: main@jfw.groups.io
Subject: Re: Problem when switching to a folder in Outlook 2016

 

Kevin: shift control I takes me to the inbox.

 

Stan

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kevin Meyers
Sent: Friday, September 28, 2018 9:09 AM
To: jfw@groups.io
Subject: Problem when switching to a folder in Outlook 2016

 

Hello, I’m using windows10, Jaws2018 and Outlook2016. There are times I will switch to a folder to look at an email. I read the email and press the escape key when done to get out of the email. I then press F6 to bring up the folder list. I then try to move back to the inbox and the cursor is sitting on the inbox folder. Yet once I press the enter key it doesn’t go in. This usually happens when I went into the delete folder and then go back to the inbox. I then have to exit Outlook and come back in. This doesn’t all the time. Any suggestions? Kevin

 

Kevin Meyers – motivational speaker

http://www.kevinsmeyers.com

6100 West Stonehedge Drive

Suite 148C

Greenfield, WI 53220

312-625-7710

 


Re: Problem when switching to a folder in Outlook 2016

Stan Holdeman
 

Kevin: shift control I takes me to the inbox.

 

Stan

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kevin Meyers
Sent: Friday, September 28, 2018 9:09 AM
To: jfw@groups.io
Subject: Problem when switching to a folder in Outlook 2016

 

Hello, I’m using windows10, Jaws2018 and Outlook2016. There are times I will switch to a folder to look at an email. I read the email and press the escape key when done to get out of the email. I then press F6 to bring up the folder list. I then try to move back to the inbox and the cursor is sitting on the inbox folder. Yet once I press the enter key it doesn’t go in. This usually happens when I went into the delete folder and then go back to the inbox. I then have to exit Outlook and come back in. This doesn’t all the time. Any suggestions? Kevin

 

Kevin Meyers – motivational speaker

http://www.kevinsmeyers.com

6100 West Stonehedge Drive

Suite 148C

Greenfield, WI 53220

312-625-7710

 


Re: Accessing attachments in outlook 2016

Kimber Gardner
 

Yeah, I think that is what I'm seeing. Ah well, I guess I'm stuck with
save all attachments.

Thanks anyway.

On 9/28/18, Kimber Gardner <kimbersinbox1963@...> wrote:
Hi Ann,

Unfortunately, in this case, insert A doesn't work. When I press
insert A Jaws says "no attachments" even though I know for a fact that
there are attachments. I tried this on several emails and never was
able to reach the attachments.

Thanks,
Kim

On 9/27/18, Ann Byrne <annakb@...> wrote:
Insert+a shows the list of attachments. Tab to the 'open' button and
press enter. Read to your heart's content.





--
Kimberly



--
Kimberly


Problem when switching to a folder in Outlook 2016

Kevin Meyers <kevinmeyers@...>
 

Hello, I’m using windows10, Jaws2018 and Outlook2016. There are times I will switch to a folder to look at an email. I read the email and press the escape key when done to get out of the email. I then press F6 to bring up the folder list. I then try to move back to the inbox and the cursor is sitting on the inbox folder. Yet once I press the enter key it doesn’t go in. This usually happens when I went into the delete folder and then go back to the inbox. I then have to exit Outlook and come back in. This doesn’t all the time. Any suggestions? Kevin

 

Kevin Meyers – motivational speaker

http://www.kevinsmeyers.com

6100 West Stonehedge Drive

Suite 148C

Greenfield, WI 53220

312-625-7710

 


Re: labeling buttons on webpage

Steve Nutt
 

Hi Bill,

 

Handy Tip: Instead of F2 and arrowing down to custom labels, just focus on the item and press Control+Insert+Tab.

 

All the best


Steve

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: 27 September 2018 19:49
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

Hi, Mike.

 

How to Make Custom Labels

 

This is appropriate for labeling buttons.

 

1. Put focus on the item you want to label.

2. Press jaws + F2.

3. Arrow to custom label. This will open a window that allows you to assign a label that makes sense.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 11:19 AM
To: main@jfw.groups.io
Subject: labeling buttons on webpage

 

Hey guys:

I seem to remember that there was a thread on here regarding labeling “unlabeled 0” buttons on webpages?

Is there a way to have jaws say something else whenst I figure out what the button does?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 


Re: Accessing attachments in outlook 2016

Ann Byrne
 

Maybe try the touch cursor????

At 05:58 AM 9/28/2018, you wrote:
Hi Ann,

Unfortunately, in this case, insert A doesn't work. When I press
insert A Jaws says "no attachments" even though I know for a fact that
there are attachments. I tried this on several emails and never was
able to reach the attachments.

Thanks,
Kim

On 9/27/18, Ann Byrne <annakb@...> wrote:
Insert+a shows the list of attachments. Tab to the 'open' button and
press enter. Read to your heart's content.





--
Kimberly


Re: Accessing attachments in outlook 2016

Ann Byrne
 

you should be able to shift-tab once while in the message and land on the attachments. If insert+a doesn't work, though, shift+tab probably doesn't either. There is a way that people attach files so you can't get to them with JAWS. Ugh!

At 05:58 AM 9/28/2018, you wrote:
Hi Ann,

Unfortunately, in this case, insert A doesn't work. When I press
insert A Jaws says "no attachments" even though I know for a fact that
there are attachments. I tried this on several emails and never was
able to reach the attachments.

Thanks,
Kim

On 9/27/18, Ann Byrne <annakb@...> wrote:
Insert+a shows the list of attachments. Tab to the 'open' button and
press enter. Read to your heart's content.





--
Kimberly


Re: Accessing attachments in outlook 2016

Kimber Gardner
 

Hi Ann,

Unfortunately, in this case, insert A doesn't work. When I press
insert A Jaws says "no attachments" even though I know for a fact that
there are attachments. I tried this on several emails and never was
able to reach the attachments.

Thanks,
Kim

On 9/27/18, Ann Byrne <annakb@...> wrote:
Insert+a shows the list of attachments. Tab to the 'open' button and
press enter. Read to your heart's content.




--
Kimberly


Re: JAWS Reading Text Boxes

Ann Byrne
 

Sorry. thing more. Try the OCR. sometimes imbedded objects are invisible.

At 02:27 PM 9/27/2018, you wrote:
Thanks for the quick response.
The control shift + o seems to work as it identifies 3 inline objects. (There are 3 objects pasted on the document)

However, when I press enter, there is no response. Any thoughts?

Thanks,
Cathy


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, September 27, 2018 12:16 PM
To: main@jfw.groups.io
Subject: Re: JAWS Reading Text Boxes

If it is a true text box, press ctrl+shift+o for JAWS to see the object, then press enter for JAWS to read it.

If that doesn't work and you have JAWS 18 or later, press
insert+spacebar, then o, then s to have JAWS perform OCR on it.

Good luck!






Re: Accessing attachments in outlook 2016

Ann Byrne
 

Insert+a shows the list of attachments. Tab to the 'open' button and press enter. Read to your heart's content.


Re: Accessing attachments in outlook 2016

Kimber Gardner
 

Yes, I can save through the file menu in the manner that you describe. But I don’t always want to save every attachment that I receive, and I would like to view it before I decide whether I want to save it or not. Is there a way to do this?

Sent from Kimber's iPhone

The happy ending still beckons, and it is in the hope of grasping it that we go on.—Annie Proulx


On Sep 27, 2018, at 4:37 PM, Cathy <clschmitt@...> wrote:

Are you able to save through the file menu?
Alt F
Save attachments
Tab to arrangements
Arrow to document you want to save
Press enter
Select folder where you would like to save the document

I have the same set up as you do. I am able to follow the above steps and also see the option you mention to save all attachments.

Cathy


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kimber Gardner
Sent: Thursday, September 27, 2018 1:07 PM
To: main <main@jfw.groups.io>
Subject: Accessing attachments in outlook 2016

Hi all,

Hoping someone can provide instructions.

My office has recently upgraded to outlook 2016 in conjuction with office 365. Whenever I get an email with one or more attachments, the only way I can access them is by doing a save all attachments. I see a button that says attachments but pressing space or enter on it seems to have no effect. In previous versions of outlook I could back tab to the attachments then press enter to activate. This no longer seems to work. Back tabbing takes me only to that infernal button. What am I missing?

Any help is appreciated.

Thanks
Kim

--
Kimberly







Re: labeling buttons on webpages invirtual cursor mode

Michal Nowicki
 

Sometimes, I am able to get JAWS to recognize custom labels for the same control across pages on the same website, but I have not figured out why it works on some occasions, but not on others. Also, if the web developer updates the relevant controls, my custom labels for those controls no longer work.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, September 27, 2018 4:37 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpages invirtual cursor mode

 

Yes. That’s exactly how it works. Controls don’t label across new pages. Only the labels for the labelled page are stored. This is inconvenient, but one never knows if the controls or buttons will remain consistent across new pages, so each page must be custom labelled.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 1:38 PM
To: main@jfw.groups.io
Subject: labeling buttons on webpages invirtual cursor mode

 

Ok,

Here’s what I found.

 

I am using a website called “oyez” where one can listen and download audio recordings of supreme court arguments.

 

Te issue is when I pull up the “oral argument -month, day, year”,

There comes up a player at the bottom of the screen with five “unlabeled 0” buttons.

 

I was able to label the buttons on one case whilst having it up there for listening or downloading,

 

However, when I pulled up another case,

The labels are gone; like jaws forgot because it may think that the new case is in fact a new page?

 

Is this how it works?

 

Or, is it supposed to work that once the buttons are labeled, it should remember them no matter which case I bring up.

 

I do understand that there domains of sorts, where eve n though the site has many pages, they look the same to you and i.

 

I hope I have explained it correctly;

 

Thank you muchly for any assistance to be rendered.

 

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 


Re: labeling buttons on webpage

Bill White
 

I think both the custom label and the prompt must be done on a case by case basis.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 4:00 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

Ok,

So will the prompt I assign work across pages whereas the button label function can’t remember the buttons from page to page?

As I go from case to case?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, September 27, 2018 5:35 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

You shouldn’t need to do that. There’s also another function in JAWS which might work in your situation.

 

Creating a Prompt

 

To create a prompt:

 

Move to the control for which the prompt is not properly spoken.

Press CTRL+INSERT+TAB.

A dialog box appears to walk you through the creation of the prompt. On the first page, enter the prompt for the control as you want JAWS to speak it,

and then select Next.

On the second page, enter the prompt for the control as you want JAWS to display it in Braille, and then select Next.

On the third page, specify a Tutor message to provide assistance with navigation or the use of this control. If you leave the Tutor message blank, the

default message is used. Select Finish to create your prompt.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 1:21 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

Ok, do I have to restart jaws, or, reload the webpage for it to recognize the new labels?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, September 27, 2018 4:16 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

It should label the button as a Personal Web setting, and should work with the Virtual cursor as well as JAWS cursor.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 12:32 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

thanks Bill for the prompt response.
I went and did as you prescribed,
It took the label and I hit OK and then when I Erold back across the button it’s still sad and label zero button.
My question then is does this feature work when you are on the webpage with using the virtual cursor?
Or does it only work when you’re using the web page with the jars virtual cursor turn off?

 

contact information
Mike McGlashon
PH: 618-783-9331
Email: michael.mcglashon@...


On Sep 27, 2018, at 2:48 PM, Bill White <billwhite92701@...> wrote:

Hi, Mike.

 

How to Make Custom Labels

 

This is appropriate for labeling buttons.

 

1. Put focus on the item you want to label.

2. Press jaws + F2.

3. Arrow to custom label. This will open a window that allows you to assign a label that makes sense.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 11:19 AM
To: main@jfw.groups.io
Subject: labeling buttons on webpage

 

Hey guys:

I seem to remember that there was a thread on here regarding labeling “unlabeled 0” buttons on webpages?

Is there a way to have jaws say something else whenst I figure out what the button does?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 


Re: labeling buttons on webpage

mike mcglashon
 

Ok,

So will the prompt I assign work across pages whereas the button label function can’t remember the buttons from page to page?

As I go from case to case?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, September 27, 2018 5:35 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

You shouldn’t need to do that. There’s also another function in JAWS which might work in your situation.

 

Creating a Prompt

 

To create a prompt:

 

Move to the control for which the prompt is not properly spoken.

Press CTRL+INSERT+TAB.

A dialog box appears to walk you through the creation of the prompt. On the first page, enter the prompt for the control as you want JAWS to speak it,

and then select Next.

On the second page, enter the prompt for the control as you want JAWS to display it in Braille, and then select Next.

On the third page, specify a Tutor message to provide assistance with navigation or the use of this control. If you leave the Tutor message blank, the

default message is used. Select Finish to create your prompt.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 1:21 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

Ok, do I have to restart jaws, or, reload the webpage for it to recognize the new labels?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Thursday, September 27, 2018 4:16 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

It should label the button as a Personal Web setting, and should work with the Virtual cursor as well as JAWS cursor.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 12:32 PM
To: main@jfw.groups.io
Subject: Re: labeling buttons on webpage

 

thanks Bill for the prompt response.
I went and did as you prescribed,
It took the label and I hit OK and then when I Erold back across the button it’s still sad and label zero button.
My question then is does this feature work when you are on the webpage with using the virtual cursor?
Or does it only work when you’re using the web page with the jars virtual cursor turn off?

 

contact information
Mike McGlashon
PH: 618-783-9331
Email: michael.mcglashon@...


On Sep 27, 2018, at 2:48 PM, Bill White <billwhite92701@...> wrote:

Hi, Mike.

 

How to Make Custom Labels

 

This is appropriate for labeling buttons.

 

1. Put focus on the item you want to label.

2. Press jaws + F2.

3. Arrow to custom label. This will open a window that allows you to assign a label that makes sense.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of mike mcglashon
Sent: Thursday, September 27, 2018 11:19 AM
To: main@jfw.groups.io
Subject: labeling buttons on webpage

 

Hey guys:

I seem to remember that there was a thread on here regarding labeling “unlabeled 0” buttons on webpages?

Is there a way to have jaws say something else whenst I figure out what the button does?

 

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 


Re: Where to find the Page Break in the Word Ribbon Menus?

 

Dean Martineau wrote, with regard to inserting a page break:
The easiest way is to hit ctrl+enter.
In all my years using Windows and Word this was a trick I'd never heard of before!   You are absolutely correct that it's got to be the easiest way to insert a page break.

This old dog has learned a new trick!

--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

    A great deal of intelligence can be invested in ignorance when the need for illusion is deep.

          ~ Saul Bellow, To Jerusalem and Back