Date   

assistance

Aidan
 

Hello to all, is there anyone who may know how jaws may read the recapture code on some websites where there is no audio challenge. thanks


Re: Unchecking that Accessibility Driver in Settings...

Mike B. <mike9902@...>
 

Hi Dave,
 
Another way to do it using a different Jaws version if this ever happens again or something similar is the following.
Note: I'm using Jaws 16 to access the Jaws2019 settings.
1. Press, Windows key + R, to open the Run dialogue, type a single period, as in a period at the end of a sentence, and press enter.  This is a shortcut keystroke to your User / Name folder.
2. Press enter on, AppData, press enter on, Roaming, and press enter on, Freedom Scientific.
3. Press enter on, JAWS, navigate to the Jaws version you need to work with, press enter, arrow to / highlight, Settings, press enter, arrow to / highlight, ENU, and press enter.
Now in the Jaws2019 ENU folder you can remove or do whatever you have to do to the necessary files.
Take Care.  Mike.  Sent from my iBarstool.

----- Original Message -----
From: Dave...
Sent: Tuesday, February 19, 2019 9:29 AM
Subject: Unchecking that Accessibility Driver in Settings...

Update. Finally got JAWS 2019 working. Had to remove and install fresh, and also had to delete/rename the last two user settings that had changed: settings.ini and default.jcf. In retrospect, I suspect that if I had simply used NVDA to go to my user settings in JAWS 2019 and just deleted those two files, JAWS 2019 would have repaired itself just fine. But man, that was pretty daunting and a time-waste.
 
If you have Windows 7, absolutely *do not* uncheck that Accessibility Driver in the default settings.
 
Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer
 
 
----- Original Message -----
From: Dave...
Sent: Tuesday, February 19, 2019 08:25
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

Mike,
 
Nope. You're absolutely correct.
 
Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer
 
 
----- Original Message -----
Sent: Tuesday, February 19, 2019 07:58
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

Hi Mike.  If I am not mistaken, I believe the Mirror Display driver is used on Windows 7 computers, and is replaced by the Accessibility driver starting with the Windows 8 operating system.  Anyone using Windows 7 should continue using the Mirror display driver.  That was my understanding of the process, but I could be wrong.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B.
Sent: Tuesday, February 19, 2019 9:00 AM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Here's the explanation of the Accessibility Driver from the default Settings Center:

The accessibility driver is a system level driver installed by our software that has been used for many years to provide screen information to JAWS. This information is known as the Off Screen Model (OSM) and is used primarily by review cursors like the JAWS Cursor and Invisible Cursor as well as by JAWS scripts. As Windows 10 increasingly uses different methods of displaying information, this legacy accessibility driver no longer works in many cases.
Clearing this check box configures JAWS to use new API Accessibility Monitor technology we developed in order to help overcome the missing information previously obtained from the Accessibility Driver.
This check box is selected by default.

Take Care.  Mike.  Sent from my iBarstool.

----- Original Message -----

From: Dave...

Sent: Tuesday, February 19, 2019 12:00 AM

Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Sieghard,

 

Um, well I just did this -- unchecked the accessibility driver, and now JAWS 2019 has crashed and refuses to load. Any further suggestions?

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

Sent: Monday, February 18, 2019 21:19

Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Jaws still uses the so-called accessibility driver. In fact, in Jaws 2019 you can go to the Jaws Settings Centre, load default settings and type all or part of the word “accessibility” driver and you can then uncheck the accessibility driver and use the more modern method with is called “GDI Hooking”. This is currently being tested and Vispero is not making a big deal of it so far since some things may work better with it unchecked, but many things may not. Ultimately the goal is to have this unchecked by default and to restore the functionality of the Jaws cursor to what it once was or better.

 

 

From: main@jfw.groups.io <main@...> On Behalf Of Dave...
Sent: Monday, February 18, 2019 9:12 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

James,

 

Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

From: James Homuth

Sent: Monday, February 18, 2019 20:52

Subject: Is there a version of JAWS that doesn't use mirror display drivers?

 

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.


Unchecking that Accessibility Driver in Settings...

Dave...
 

Update. Finally got JAWS 2019 working. Had to remove and install fresh, and also had to delete/rename the last two user settings that had changed: settings.ini and default.jcf. In retrospect, I suspect that if I had simply used NVDA to go to my user settings in JAWS 2019 and just deleted those two files, JAWS 2019 would have repaired itself just fine. But man, that was pretty daunting and a time-waste.
 
If you have Windows 7, absolutely *do not* uncheck that Accessibility Driver in the default settings.
 
Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer
 
 

----- Original Message -----
From: Dave...
Sent: Tuesday, February 19, 2019 08:25
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

Mike,
 
Nope. You're absolutely correct.
 
Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer
 
 
----- Original Message -----
Sent: Tuesday, February 19, 2019 07:58
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

Hi Mike.  If I am not mistaken, I believe the Mirror Display driver is used on Windows 7 computers, and is replaced by the Accessibility driver starting with the Windows 8 operating system.  Anyone using Windows 7 should continue using the Mirror display driver.  That was my understanding of the process, but I could be wrong.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B.
Sent: Tuesday, February 19, 2019 9:00 AM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Here's the explanation of the Accessibility Driver from the default Settings Center:

The accessibility driver is a system level driver installed by our software that has been used for many years to provide screen information to JAWS. This information is known as the Off Screen Model (OSM) and is used primarily by review cursors like the JAWS Cursor and Invisible Cursor as well as by JAWS scripts. As Windows 10 increasingly uses different methods of displaying information, this legacy accessibility driver no longer works in many cases.
Clearing this check box configures JAWS to use new API Accessibility Monitor technology we developed in order to help overcome the missing information previously obtained from the Accessibility Driver.
This check box is selected by default.

Take Care.  Mike.  Sent from my iBarstool.

----- Original Message -----

From: Dave...

Sent: Tuesday, February 19, 2019 12:00 AM

Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Sieghard,

 

Um, well I just did this -- unchecked the accessibility driver, and now JAWS 2019 has crashed and refuses to load. Any further suggestions?

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

Sent: Monday, February 18, 2019 21:19

Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Jaws still uses the so-called accessibility driver. In fact, in Jaws 2019 you can go to the Jaws Settings Centre, load default settings and type all or part of the word “accessibility” driver and you can then uncheck the accessibility driver and use the more modern method with is called “GDI Hooking”. This is currently being tested and Vispero is not making a big deal of it so far since some things may work better with it unchecked, but many things may not. Ultimately the goal is to have this unchecked by default and to restore the functionality of the Jaws cursor to what it once was or better.

 

 

From: main@jfw.groups.io <main@...> On Behalf Of Dave...
Sent: Monday, February 18, 2019 9:12 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

James,

 

Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

From: James Homuth

Sent: Monday, February 18, 2019 20:52

Subject: Is there a version of JAWS that doesn't use mirror display drivers?

 

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.


Re: Question from a jaws for windows list member

 

Asked and answered, I believe, already:  Drop Down List in Excel
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore


Re: Is there a version of JAWS that doesn't use mirror display drivers?

Dave...
 

Mike,
 
Nope. You're absolutely correct.
 
Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer
 
 

----- Original Message -----
Sent: Tuesday, February 19, 2019 07:58
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

Hi Mike.  If I am not mistaken, I believe the Mirror Display driver is used on Windows 7 computers, and is replaced by the Accessibility driver starting with the Windows 8 operating system.  Anyone using Windows 7 should continue using the Mirror display driver.  That was my understanding of the process, but I could be wrong.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B.
Sent: Tuesday, February 19, 2019 9:00 AM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Here's the explanation of the Accessibility Driver from the default Settings Center:

The accessibility driver is a system level driver installed by our software that has been used for many years to provide screen information to JAWS. This information is known as the Off Screen Model (OSM) and is used primarily by review cursors like the JAWS Cursor and Invisible Cursor as well as by JAWS scripts. As Windows 10 increasingly uses different methods of displaying information, this legacy accessibility driver no longer works in many cases.
Clearing this check box configures JAWS to use new API Accessibility Monitor technology we developed in order to help overcome the missing information previously obtained from the Accessibility Driver.
This check box is selected by default.

Take Care.  Mike.  Sent from my iBarstool.

----- Original Message -----

From: Dave...

Sent: Tuesday, February 19, 2019 12:00 AM

Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Sieghard,

 

Um, well I just did this -- unchecked the accessibility driver, and now JAWS 2019 has crashed and refuses to load. Any further suggestions?

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

Sent: Monday, February 18, 2019 21:19

Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Jaws still uses the so-called accessibility driver. In fact, in Jaws 2019 you can go to the Jaws Settings Centre, load default settings and type all or part of the word “accessibility” driver and you can then uncheck the accessibility driver and use the more modern method with is called “GDI Hooking”. This is currently being tested and Vispero is not making a big deal of it so far since some things may work better with it unchecked, but many things may not. Ultimately the goal is to have this unchecked by default and to restore the functionality of the Jaws cursor to what it once was or better.

 

 

From: main@jfw.groups.io <main@...> On Behalf Of Dave...
Sent: Monday, February 18, 2019 9:12 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

James,

 

Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

From: James Homuth

Sent: Monday, February 18, 2019 20:52

Subject: Is there a version of JAWS that doesn't use mirror display drivers?

 

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.


Re: Is there a version of JAWS that doesn't use mirror display drivers?

Maria Campbell
 

Looking forward to the day when the JAWS cursor works again.


Maria Campbell
lucky1inct@...

Somewhere, something incredible is waiting to be known.
~ Blaise Pascal ~

On 2/19/2019 12:19 AM, Sieghard Weitzel wrote:

Jaws still uses the so-called accessibility driver. In fact, in Jaws 2019 you can go to the Jaws Settings Centre, load default settings and type all or part of the word “accessibility” driver and you can then uncheck the accessibility driver and use the more modern method with is called “GDI Hooking”. This is currently being tested and Vispero is not making a big deal of it so far since some things may work better with it unchecked, but many things may not. Ultimately the goal is to have this unchecked by default and to restore the functionality of the Jaws cursor to what it once was or better.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, February 18, 2019 9:12 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

James,

 

Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

From: James Homuth

Sent: Monday, February 18, 2019 20:52

Subject: Is there a version of JAWS that doesn't use mirror display drivers?

 

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.


Question from a jaws for windows list member

Jay <jcoffin@...>
 




Begin forwarded message:

From: Vispero Technical Support <support@...>
Date: February 18, 2019 at 11:04:06 AM MST
To: "'jcoffin@...'" <jcoffin@...>
Subject: RE: Question from a jaws for windows list member

Dear Valued Customer:

 

Thank you for contacting Vispero™ Technical Support. The question that this user posed does not actually related to any of our products. However, this user should consider some of these other sources where he may find the answer he needs.

 

* Check the documentation for either Microsoft Windows or Microsoft Excel.

 

* Call the Microsoft Accessibility Hotline at (800)936-5900 for their assistance.

 

If you have any additional questions regarding this or any other issue, please don't hesitate to contact us.

 

If replying to this message, be sure to include all previous correspondence pertaining to this matter so that we might better assist you.

 

Sincerely,

 

Dennis Godin

Vispero | Technical Support Specialist

17757 US Highway 19 N, Suite 560, Clearwater, FL 33764

T 727-803-8600 F 727-803-8001

support@...

www.vispero.com

How am I doing?  Let Bryan Carver, Director of Technical Support know!

 

From: jcoffin@... <jcoffin@...>
Sent: Sunday, February 17, 2019 12:12 PM
To: Vispero Technical Support <support@...>
Subject: Question from a jaws for windows list member

 

Hi.

 

I got this email in my inbox this morning, so I’m forwarding this message on behalf of the person who sent it to me. This message is from the main@jfw.groups.io list.

 

Message:

 

Hello,

 

Is there a way for me to quickly jump to an item in a drop down list in Excel? I am having to work with a spreadsheet that has several drop downs that

are very long and if I could quickly jump to a particular part of the list then it would make my job a little easier.

 

Thank You,

 

Scott Rumery


Re: Is there a version of JAWS that doesn't use mirror display drivers?

Michael Mote
 

Hi Mike.  If I am not mistaken, I believe the Mirror Display driver is used on Windows 7 computers, and is replaced by the Accessibility driver starting with the Windows 8 operating system.  Anyone using Windows 7 should continue using the Mirror display driver.  That was my understanding of the process, but I could be wrong.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B.
Sent: Tuesday, February 19, 2019 9:00 AM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Here's the explanation of the Accessibility Driver from the default Settings Center:

The accessibility driver is a system level driver installed by our software that has been used for many years to provide screen information to JAWS. This information is known as the Off Screen Model (OSM) and is used primarily by review cursors like the JAWS Cursor and Invisible Cursor as well as by JAWS scripts. As Windows 10 increasingly uses different methods of displaying information, this legacy accessibility driver no longer works in many cases.
Clearing this check box configures JAWS to use new API Accessibility Monitor technology we developed in order to help overcome the missing information previously obtained from the Accessibility Driver.
This check box is selected by default.

Take Care.  Mike.  Sent from my iBarstool.

----- Original Message -----

From: Dave...

Sent: Tuesday, February 19, 2019 12:00 AM

Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Sieghard,

 

Um, well I just did this -- unchecked the accessibility driver, and now JAWS 2019 has crashed and refuses to load. Any further suggestions?

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

Sent: Monday, February 18, 2019 21:19

Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Jaws still uses the so-called accessibility driver. In fact, in Jaws 2019 you can go to the Jaws Settings Centre, load default settings and type all or part of the word “accessibility” driver and you can then uncheck the accessibility driver and use the more modern method with is called “GDI Hooking”. This is currently being tested and Vispero is not making a big deal of it so far since some things may work better with it unchecked, but many things may not. Ultimately the goal is to have this unchecked by default and to restore the functionality of the Jaws cursor to what it once was or better.

 

 

From: main@jfw.groups.io <main@...> On Behalf Of Dave...
Sent: Monday, February 18, 2019 9:12 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

James,

 

Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

Sent: Monday, February 18, 2019 20:52

Subject: Is there a version of JAWS that doesn't use mirror display drivers?

 

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.


Warning - Uncheck "Accessibility Driver at your own risk

Dave...
 

Mike,
 
Okay, so I have Windows 7. Therefore I should not have unchecked the "Use accessibility driver" in the default setting.
 
Because I cannot even do a JAWS 2019 repair now. It crashes. I'm back to JAWS 2018 until I unscramble this mess.
 
Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer
 
 

----- Original Message -----
From: Mike B.
Sent: Tuesday, February 19, 2019 06:00
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

Here's the explanation of the Accessibility Driver from the default Settings Center:
The accessibility driver is a system level driver installed by our software that has been used for many years to provide screen information to JAWS. This information is known as the Off Screen Model (OSM) and is used primarily by review cursors like the JAWS Cursor and Invisible Cursor as well as by JAWS scripts. As Windows 10 increasingly uses different methods of displaying information, this legacy accessibility driver no longer works in many cases.
Clearing this check box configures JAWS to use new API Accessibility Monitor technology we developed in order to help overcome the missing information previously obtained from the Accessibility Driver.
This check box is selected by default.
Take Care.  Mike.  Sent from my iBarstool.
----- Original Message -----
From: Dave...
Sent: Tuesday, February 19, 2019 12:00 AM
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

Sieghard,
 
Um, well I just did this -- unchecked the accessibility driver, and now JAWS 2019 has crashed and refuses to load. Any further suggestions?
 
Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer
 
 
----- Original Message -----
Sent: Monday, February 18, 2019 21:19
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

Jaws still uses the so-called accessibility driver. In fact, in Jaws 2019 you can go to the Jaws Settings Centre, load default settings and type all or part of the word “accessibility” driver and you can then uncheck the accessibility driver and use the more modern method with is called “GDI Hooking”. This is currently being tested and Vispero is not making a big deal of it so far since some things may work better with it unchecked, but many things may not. Ultimately the goal is to have this unchecked by default and to restore the functionality of the Jaws cursor to what it once was or better.

 

 

From: main@jfw.groups.io <main@...> On Behalf Of Dave...
Sent: Monday, February 18, 2019 9:12 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

James,

 

Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

From: James Homuth

Sent: Monday, February 18, 2019 20:52

Subject: Is there a version of JAWS that doesn't use mirror display drivers?

 

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.


Re: Is there a version of JAWS that doesn't use mirror display drivers?

Mike B. <mike9902@...>
 

Here's the explanation of the Accessibility Driver from the default Settings Center:
The accessibility driver is a system level driver installed by our software that has been used for many years to provide screen information to JAWS. This information is known as the Off Screen Model (OSM) and is used primarily by review cursors like the JAWS Cursor and Invisible Cursor as well as by JAWS scripts. As Windows 10 increasingly uses different methods of displaying information, this legacy accessibility driver no longer works in many cases.
Clearing this check box configures JAWS to use new API Accessibility Monitor technology we developed in order to help overcome the missing information previously obtained from the Accessibility Driver.
This check box is selected by default.
Take Care.  Mike.  Sent from my iBarstool.

----- Original Message -----
From: Dave...
Sent: Tuesday, February 19, 2019 12:00 AM
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

Sieghard,
 
Um, well I just did this -- unchecked the accessibility driver, and now JAWS 2019 has crashed and refuses to load. Any further suggestions?
 
Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer
 
 
----- Original Message -----
Sent: Monday, February 18, 2019 21:19
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

Jaws still uses the so-called accessibility driver. In fact, in Jaws 2019 you can go to the Jaws Settings Centre, load default settings and type all or part of the word “accessibility” driver and you can then uncheck the accessibility driver and use the more modern method with is called “GDI Hooking”. This is currently being tested and Vispero is not making a big deal of it so far since some things may work better with it unchecked, but many things may not. Ultimately the goal is to have this unchecked by default and to restore the functionality of the Jaws cursor to what it once was or better.

 

 

From: main@jfw.groups.io <main@...> On Behalf Of Dave...
Sent: Monday, February 18, 2019 9:12 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

James,

 

Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

From: James Homuth

Sent: Monday, February 18, 2019 20:52

Subject: Is there a version of JAWS that doesn't use mirror display drivers?

 

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.


FW: jaws 2019 and office-2010 updates

William Windels
 

Hello,

 

I use win10 and the last version of jaws2019

on my workplace and the following updates are pushed by microsoft last week:

 

Security Update for Microsoft Excel 2010 32-Bit Edition (KB4462186)        Feb-12-2019

Security Update for Microsoft Office 2010 32-Bit Edition (KB4018313)      Feb-12-2019

Security Update for Microsoft Office 2010 32-Bit Edition (KB4462174)      Feb-12-2019

Security Update for Microsoft Office 2010 32-Bit Edition (KB4462177)      Feb-12-2019

 

Since this update, jaws and/or excel are hanging while working in excel.

e.g. if I select a row, jaws is speaking the whole row and during the announcement of jaws , I can’t move the cursor.: the computer is blocking for everyone.

This is what I can reproduce but perhaps there are also other tasks in excel that don’t work fine since the updates.

 

Is there any known impact because of this security-updates?

 

Many thx for any suggestion

 

 

 

 

Met vriendelijke groeten

William Windels

 

Incident Manager SWO

02/506 0 487 (niet bereikbaar op maandag en vrijdag)

 

Van: Jordi Smolders [mailto:jordi.smolders@...]
Verzonden: dinsdag 19 februari 2019 13:40
Aan: William Windels
Onderwerp: jaws excel problemen

 

Security Update for Microsoft Excel 2010 32-Bit Edition (KB4462186)

Feb-12-2019

Security Update for Microsoft Office 2010 32-Bit Edition (KB4018313)

Feb-12-2019

Security Update for Microsoft Office 2010 32-Bit Edition (KB4462174)

Feb-12-2019

Security Update for Microsoft Office 2010 32-Bit Edition (KB4462177)

Feb-12-2019

 

Grts

Jordi


Jordi Smolders
2nd line Remote

Econocom@VDAB
t: +32 2 506 18 70
m: +32 475 78 20 25
e: Jordi.Smolders@...

www.vdab.be
www.econocom.be

 


Re: Is there a version of JAWS that doesn't use mirror display drivers?

Dave Durber
 

Hello Dave:
 
It appears that, it depends on the version of Windows you are using.
 
I am using Window 7 Professional, and until this morning, I was using JAWS 2018. I just installed JAWS 2019.
 
Before I installed JAWS 2019, I looked in Display Adapters in Device Manager. In addition to the video device driver, the FreedomScientific Mirror Driver was also listed.
 
After I installed JAWS 19, I again checked to see if the driver for JAWS had changed. It had not.
 
I reinstalled Windows 7 just after JAWS 2018 was released, and until this morning, JAWS 2018 was the only version of JAWS installed on this computer.
 
Sincerely:
 
Dave Durber
 

----- Original Message -----
From: Dave...
Sent: Tuesday, February 19, 2019 5:12 AM
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

James,
 
Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.
 
Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer
 
 
----- Original Message -----
Sent: Monday, February 18, 2019 20:52
Subject: Is there a version of JAWS that doesn't use mirror display drivers?

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.


Re: trying to learn how to use Chrome, and having issues.

Dave Durber
 

That is correct.
 
Sincerely:
 
Dave Durber
 

----- Original Message -----
From: JM Casey
Sent: Monday, February 18, 2019 10:50 PM
Subject: Re: trying to learn how to use Chrome, and having issues.

Ctrl-l actually works in Internet Explorer too, and I believe always has.

Ctrl-o will open a local file on just about any other browser, so it’s best to get used to ctrl-l, no matter what browser you are using currently.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Meyer
Sent: February 18, 2019 5:48 PM
To: main@jfw.groups.io
Subject: Re: trying to learn how to use Chrome, and having issues.

 

Control-l is what gives you a place to type in a website or search.  This is an adjustment from using control-o to open a website with internet explorer.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Monday, February 18, 2019 1:00 PM
To: main@jfw.groups.io
Subject: trying to learn how to use Chrome, and having issues.

 

Hi all,

I have the tutorial here, by David Moore. I have read it, and am still having issues. I can’t even get to a web site I want. So, I open Chrome. I hit the windows key up arrow to make sure that chrome is maximized. Then I try to type in the web site I want. And so I hit Control O, and before I can type in anything, I hear, OAKPT2. So I back space that out, and type in what I want. And I hear an ok button. So I hit the space bar, and nothing happens after that. I am running windows ten and jaws 2019. What the heck am I doing wrong? I want to use this browser as my default, but not if it is this hard to use. Jim


Re: trying to learn how to use Chrome, and having issues.

Dave Durber
 

In Internet Explorer, CTRL+L and CTRL+O, both take you to the place where you can type a URL address.
 
Sincerely:
 
Dave Durber
 

----- Original Message -----
Sent: Monday, February 18, 2019 10:48 PM
Subject: Re: trying to learn how to use Chrome, and having issues.

Control-l is what gives you a place to type in a website or search.  This is an adjustment from using control-o to open a website with internet explorer.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Monday, February 18, 2019 1:00 PM
To: main@jfw.groups.io
Subject: trying to learn how to use Chrome, and having issues.

 

Hi all,

I have the tutorial here, by David Moore. I have read it, and am still having issues. I can’t even get to a web site I want. So, I open Chrome. I hit the windows key up arrow to make sure that chrome is maximized. Then I try to type in the web site I want. And so I hit Control O, and before I can type in anything, I hear, OAKPT2. So I back space that out, and type in what I want. And I hear an ok button. So I hit the space bar, and nothing happens after that. I am running windows ten and jaws 2019. What the heck am I doing wrong? I want to use this browser as my default, but not if it is this hard to use. Jim


Re: accessible project management/collaboration software

paul lemm
 

Hi,

 

Thanks for the adice. I don’t know a huge amount about SharePoint or the google suite, but I’ll take a look online to get a little more information about both to see if they would help.

 

Again thanks for the reply and advice.

 

Regards

 

Paul

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: Monday, February 18, 2019 4:51 PM
To: main@jfw.groups.io
Subject: Re: accessible project management/collaboration software

 

So many directions you can go with this question.  We use SharePoint here at work, which works fine with JAWS if you are using it to check in and out documents, but not so great if you are trying ot edit actual pages. 

 

I haven’t used the Google suite, but it sounds from other people like that could be an option. 

 

I’ve never heard good accessibility things for Miscrosoft Project.  We tend to use Excel here for the project plan and SharePoint for sharing documents. 

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of paul lemm
Sent: Sunday, February 17, 2019 12:34 PM
To: jfw@groups.io
Subject: accessible project management/collaboration software

 

Hi,

 

So I’m working on a project with some other people , one of the sighted members of the group has suggested we look into some project management software or online collaboration tool where we can all log what we’re doing/working on so others from the group can see  exactly what we  are all doing and our progress on that work. So just wondering if anyone from this group has used anything like this and has any suggestions for either an online tool or piece  of  software that would do this and work well with Jaws?

 

Regards

 

Paul



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


Re: Is there a version of JAWS that doesn't use mirror display drivers?

Dave...
 

Sieghard,
 
Um, well I just did this -- unchecked the accessibility driver, and now JAWS 2019 has crashed and refuses to load. Any further suggestions?
 
Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer
 
 

----- Original Message -----
Sent: Monday, February 18, 2019 21:19
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

Jaws still uses the so-called accessibility driver. In fact, in Jaws 2019 you can go to the Jaws Settings Centre, load default settings and type all or part of the word “accessibility” driver and you can then uncheck the accessibility driver and use the more modern method with is called “GDI Hooking”. This is currently being tested and Vispero is not making a big deal of it so far since some things may work better with it unchecked, but many things may not. Ultimately the goal is to have this unchecked by default and to restore the functionality of the Jaws cursor to what it once was or better.

 

 

From: main@jfw.groups.io <main@...> On Behalf Of Dave...
Sent: Monday, February 18, 2019 9:12 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

James,

 

Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

From: James Homuth

Sent: Monday, February 18, 2019 20:52

Subject: Is there a version of JAWS that doesn't use mirror display drivers?

 

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.


Re: Is there a version of JAWS that doesn't use mirror display drivers?

James Homuth
 

Worth looking at when I have a chance to sit down with it. I want to say we were running 2018 on this machine in demo mode, so perhaps if I feel daring I’ll see what 2019 can do.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: February-19-19 12:30 AM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

I am not sure if the mirror display driver is the same thing, but I just checked here with Jaws 2019 and it is called the ”Freedom Scientific Accessibility Display Driver”.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth
Sent: Monday, February 18, 2019 9:23 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Nope. We had either 18 or 2018 on this machine and they were still there. Uninstalling it now because it’s making life complicated.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: February-19-19 12:12 AM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

James,

 

Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

Sent: Monday, February 18, 2019 20:52

Subject: Is there a version of JAWS that doesn't use mirror display drivers?

 

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.


Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

I am not sure if the mirror display driver is the same thing, but I just checked here with Jaws 2019 and it is called the ”Freedom Scientific Accessibility Display Driver”.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth
Sent: Monday, February 18, 2019 9:23 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Nope. We had either 18 or 2018 on this machine and they were still there. Uninstalling it now because it’s making life complicated.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: February-19-19 12:12 AM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

James,

 

Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

From: James Homuth

Sent: Monday, February 18, 2019 20:52

Subject: Is there a version of JAWS that doesn't use mirror display drivers?

 

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.


Re: Is there a version of JAWS that doesn't use mirror display drivers?

James Homuth
 

Directly? Nothing. However, the entire reason the accessibility drivers are proving a pain in my particular situation is because they mess with Magnifier. Affording Zoomtext would solve that problem. So would being able to disable the accessibility drivers.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: February-19-19 12:28 AM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

What does being able to afford Zoomtext or Jaws have to do with accessibility drivers or not?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth
Sent: Monday, February 18, 2019 9:25 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

God I hope this becomes a thing soon. I don’t care so much about the JAWS cursor, but the person who owns this computer hasn’t got a hope in hell of affording Zoomtext. I can afford JAWS, but that only solves half our problem. LOL

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: February-19-19 12:20 AM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Jaws still uses the so-called accessibility driver. In fact, in Jaws 2019 you can go to the Jaws Settings Centre, load default settings and type all or part of the word “accessibility” driver and you can then uncheck the accessibility driver and use the more modern method with is called “GDI Hooking”. This is currently being tested and Vispero is not making a big deal of it so far since some things may work better with it unchecked, but many things may not. Ultimately the goal is to have this unchecked by default and to restore the functionality of the Jaws cursor to what it once was or better.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, February 18, 2019 9:12 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

James,

 

Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

Sent: Monday, February 18, 2019 20:52

Subject: Is there a version of JAWS that doesn't use mirror display drivers?

 

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.


Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

What does being able to afford Zoomtext or Jaws have to do with accessibility drivers or not?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth
Sent: Monday, February 18, 2019 9:25 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

God I hope this becomes a thing soon. I don’t care so much about the JAWS cursor, but the person who owns this computer hasn’t got a hope in hell of affording Zoomtext. I can afford JAWS, but that only solves half our problem. LOL

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: February-19-19 12:20 AM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

Jaws still uses the so-called accessibility driver. In fact, in Jaws 2019 you can go to the Jaws Settings Centre, load default settings and type all or part of the word “accessibility” driver and you can then uncheck the accessibility driver and use the more modern method with is called “GDI Hooking”. This is currently being tested and Vispero is not making a big deal of it so far since some things may work better with it unchecked, but many things may not. Ultimately the goal is to have this unchecked by default and to restore the functionality of the Jaws cursor to what it once was or better.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave...
Sent: Monday, February 18, 2019 9:12 PM
To: main@jfw.groups.io
Subject: Re: Is there a version of JAWS that doesn't use mirror display drivers?

 

James,

 

Not absolutely sure, but I think the mirror drivers stopped around JAWS 15.

 

Dave
Oregonite, woodworker, Engineer, Musician, and Pioneer

 

 

----- Original Message -----

From: James Homuth

Sent: Monday, February 18, 2019 20:52

Subject: Is there a version of JAWS that doesn't use mirror display drivers?

 

I had heard a long time ago that there was a version coming that dropped mirror display drivers. Does that version exist, and if so, which version is it? Asking as we’re running into the issue of mirror drivers messing with the Windows magnifier. As the primary user of this system is low vision but doesn’t have Zoomtext, and I occasionally provide tech help, we’re having to run Magnifier primarily with JAWS on the system for when I need to use it. That creates problems, because Magnifier requires Aero to run properly, and mirror drivers don’t support aero. Is there a version of JAWS that doesn’t use the mirror drivers? If so, that has just made my life about 5 times easier.