Date   

moderated Re: Jaws Cursor İssue

Dan Longmore
 

Hi,

  JAWS is what was meant.  Sorry I did not proof better.

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Lino Morales
Sent: Wednesday, June 5, 2019 5:11 PM
To: main@jfw.groups.io
Subject: Re: Jaws Cursor İssue

 

The John’s cursor?

 

                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

                                                                                                               

 


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Dan Longmore <danlongmore44@...>
Sent: Wednesday, June 5, 2019 9:11:14 AM
To: main@jfw.groups.io
Subject: Re: Jaws Cursor İssue

 

 I am not sure of the solution, but this is a typical John’s Kurtzer response. As windows has advanced and technology increased the John’s cursor has become less useful. I understand that Freedom Scientific is working on that and hopes to have major changes soon. 

 

 


From: main@jfw.groups.io on behalf of soner <soner.boun@...>
Sent: Wednesday, June 5, 2019 4:33 AM
To: main@jfw.groups.io
Cc: jfw@groups.io
Subject: Jaws Cursor İssue

 

Dear listers, on Windows 10, I encounter a strange problem in Jaws
cursor mode with all web browsers. that while it reads properly
through arrow keys, it just says: "space", if I would like to move
word by word or character by character to move and click an element or
a word to read. So I am literally unable to grabb anything clickable
or any word to locate in Jaws cursor mode.
I have tested through various Jaws versions from April 2019 down to
2018, but it gives the same result.
I use a Toshiba Satellite Radius 12 P20W-C laptop with all the drivers
and firmwares up to date.

Any tip or help greatly appreciated.



moderated Re: Jaws Cursor İssue

Bill White
 

Sounds as if he was dictating into an iPhone, and the AI mistook JAWS Cursor for John’s Cursor.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lino Morales
Sent: Wednesday, June 5, 2019 2:11 PM
To: main@jfw.groups.io
Subject: Re: Jaws Cursor İssue

 

The John’s cursor?

 

                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

                                                                                                               

 


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Dan Longmore <danlongmore44@...>
Sent: Wednesday, June 5, 2019 9:11:14 AM
To: main@jfw.groups.io
Subject: Re: Jaws Cursor İssue

 

 I am not sure of the solution, but this is a typical John’s Kurtzer response. As windows has advanced and technology increased the John’s cursor has become less useful. I understand that Freedom Scientific is working on that and hopes to have major changes soon. 

 

 


From: main@jfw.groups.io on behalf of soner <soner.boun@...>
Sent: Wednesday, June 5, 2019 4:33 AM
To: main@jfw.groups.io
Cc: jfw@groups.io
Subject: Jaws Cursor İssue

 

Dear listers, on Windows 10, I encounter a strange problem in Jaws
cursor mode with all web browsers. that while it reads properly
through arrow keys, it just says: "space", if I would like to move
word by word or character by character to move and click an element or
a word to read. So I am literally unable to grabb anything clickable
or any word to locate in Jaws cursor mode.
I have tested through various Jaws versions from April 2019 down to
2018, but it gives the same result.
I use a Toshiba Satellite Radius 12 P20W-C laptop with all the drivers
and firmwares up to date.

Any tip or help greatly appreciated.



moderated Re: Jaws Cursor İssue

Lino Morales
 

The John’s cursor?

 

                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

                                                                                                               

 


From: main@jfw.groups.io <main@jfw.groups.io> on behalf of Dan Longmore <danlongmore44@...>
Sent: Wednesday, June 5, 2019 9:11:14 AM
To: main@jfw.groups.io
Subject: Re: Jaws Cursor İssue
 
 I am not sure of the solution, but this is a typical John’s Kurtzer response. As windows has advanced and technology increased the John’s cursor has become less useful. I understand that Freedom Scientific is working on that and hopes to have major changes soon. 

 

From: main@jfw.groups.io on behalf of soner <soner.boun@...>
Sent: Wednesday, June 5, 2019 4:33 AM
To: main@jfw.groups.io
Cc: jfw@groups.io
Subject: Jaws Cursor İssue
 
Dear listers, on Windows 10, I encounter a strange problem in Jaws
cursor mode with all web browsers. that while it reads properly
through arrow keys, it just says: "space", if I would like to move
word by word or character by character to move and click an element or
a word to read. So I am literally unable to grabb anything clickable
or any word to locate in Jaws cursor mode.
I have tested through various Jaws versions from April 2019 down to
2018, but it gives the same result.
I use a Toshiba Satellite Radius 12 P20W-C laptop with all the drivers
and firmwares up to date.

Any tip or help greatly appreciated.




moderated Re: More Office 2019 questions...

Rick Mladek
 

Hi,

 

Thank you, I had found this information and corrected already. Thanks for your help.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Kingsbury
Sent: Wednesday, June 5, 2019 9:17 AM
To: main@jfw.groups.io
Subject: Re: More Office 2019 questions...

 

  1. In Word, go into Quick Settings with Insert V.
  2. In the search box, type in the word “level.”
  3. Down arrow to outline level indication level, uncheck it, tab to the OK button and space bar.

 

It should now stop reading this.


moderated Re: Jaws reading level within MS Word 2019

Rick Mladek
 

For those having issues with Jaws reading levels egg: level 1, level 0, the fix is as such. This was the fix for my problem.

 

You can now configure whether or not levels are announced when navigating Word documents or Outlook emails, such as when moving in and out of lists.

To toggle this feature, open Quick Settings (INSERT+V) and arrow down to "Outline Level Indication." Press the space bar to un-check this box. Tab to OK and hit enter.

 

Rick


moderated Re: Jaws Cursor İssue

 

It is definitely a fact that in Windows 10 the Jaws cursor cannot read nearly as much information as in Windows 7. What the John’s cursor can do I don’t know because I haven’t figured out how to activate it 🤣

Dan is also correct in saying that Vispero is working on a major change regarding how Jaws gets information from Windows and that in theory this will restore some of the old Jaws cursor functionality.

In the meantime don’t forget that in Windows 10 the touch cursor can also be very useful, if you don’t know what it is or how to use it please activate Help > Jaws Help Topics and find the entry about Jaws cursors. The name implies that it is used with a touch screen and that is true, but it can be activated from the keyboard and be useful even if your computer doesn’t even have a touch screen capable display.

 

Regards,

Sieghard

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 5, 2019 6:11 AM
To: main@jfw.groups.io
Subject: Re: Jaws Cursor İssue

 

 I am not sure of the solution, but this is a typical John’s Kurtzer response. As windows has advanced and technology increased the John’s cursor has become less useful. I understand that Freedom Scientific is working on that and hopes to have major changes soon. 

 

 


From: main@jfw.groups.io on behalf of soner <soner.boun@...>
Sent: Wednesday, June 5, 2019 4:33 AM
To: main@jfw.groups.io
Cc: jfw@groups.io
Subject: Jaws Cursor İssue

 

Dear listers, on Windows 10, I encounter a strange problem in Jaws
cursor mode with all web browsers. that while it reads properly
through arrow keys, it just says: "space", if I would like to move
word by word or character by character to move and click an element or
a word to read. So I am literally unable to grabb anything clickable
or any word to locate in Jaws cursor mode.
I have tested through various Jaws versions from April 2019 down to
2018, but it gives the same result.
I use a Toshiba Satellite Radius 12 P20W-C laptop with all the drivers
and firmwares up to date.

Any tip or help greatly appreciated.



moderated Re: More Office 2019 questions...

David Kingsbury
 

  1. In Word, go into Quick Settings with Insert V.

  2. In the search box, type in the word “level.”

  3. Down arrow to outline level indication level, uncheck it, tab to the OK button and space bar.

 

It should now stop reading this.


moderated Re: Jaws Cursor İssue

Dan Longmore
 

 I am not sure of the solution, but this is a typical John’s Kurtzer response. As windows has advanced and technology increased the John’s cursor has become less useful. I understand that Freedom Scientific is working on that and hopes to have major changes soon. 

 


From: main@jfw.groups.io on behalf of soner <soner.boun@...>
Sent: Wednesday, June 5, 2019 4:33 AM
To: main@jfw.groups.io
Cc: jfw@groups.io
Subject: Jaws Cursor İssue
 
Dear listers, on Windows 10, I encounter a strange problem in Jaws
cursor mode with all web browsers. that while it reads properly
through arrow keys, it just says: "space", if I would like to move
word by word or character by character to move and click an element or
a word to read. So I am literally unable to grabb anything clickable
or any word to locate in Jaws cursor mode.
I have tested through various Jaws versions from April 2019 down to
2018, but it gives the same result.
I use a Toshiba Satellite Radius 12 P20W-C laptop with all the drivers
and firmwares up to date.

Any tip or help greatly appreciated.




moderated Jaws Cursor İssue

soner
 

Dear listers, on Windows 10, I encounter a strange problem in Jaws
cursor mode with all web browsers. that while it reads properly
through arrow keys, it just says: "space", if I would like to move
word by word or character by character to move and click an element or
a word to read. So I am literally unable to grabb anything clickable
or any word to locate in Jaws cursor mode.
I have tested through various Jaws versions from April 2019 down to
2018, but it gives the same result.
I use a Toshiba Satellite Radius 12 P20W-C laptop with all the drivers
and firmwares up to date.

Any tip or help greatly appreciated.


moderated Re: JAWS stops speaking

netbat66
 

are you useing firefox?
firefox will hang for about 30 seconds every time i open the bookmark list with control i orcontrol b.
the only way i have reduced this is to turn the virtual pc cursor off before i open the bookmark list. then jaws will continue to run. i don't get this behavior with the bookmarks when useing narrator

-----Original Message-----
From: Edward Green
Sent: Tuesday, June 04, 2019 5:51 AM
To: jfw@groups.io
Subject: JAWS stops speaking

Hi all,

I'm running JAWS 2018 on a Lenovo laptop running Windows 10. This is one of two identical machines I have for work.

The machine used to work fine. However, JAWS now stops speaking after around 5 or 10 minutes of use. It is apparently still running, there are no errors and the laptop continues to function in all other respects.

If I close JAWS and reload it, it speaks again until it stops after another 5 or 10 minutes.

I have restarted several times but this hasn't fixed the problem.

The issue does not occur on the other machine.

Does anyone have any suggestions as to how to fix this?

Many thanks,

Ed


moderated problem with crome and staying loggin in

John Covici
 

Hi. I am wondering if anyone knows how to fix a problem I am having
with crome which I just started using. I am using Jaws 2019 latest
update. With crome latest official version, it won't allow me to stay
logged in to various sites like slack, various forums, or whatever. I
made sure that under the settings that sites are allowed to read and
write cooky data -- at least the button says pressed when I go to it,
but it does not work at all, so I am wondering how it is working for
others and am I doing something wrong, or is there another setting I
need?

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


Re: goldwave scripts not working properly

Mario
 

Richard, thanks for the scripts. I have copied all of the files into

"C:\ProgramData\Freedom Scientific\JAWS\2018\Scripts\enu"

after starting Goldwave and opening a file, I tried to select a preset
(of any effect) by arrowing down, and is selecting the preset but it is
not being spoken unless I unload/reload JAWS as Dennis suggested. but
doing so appears to break access to expected features of having scripts
for Goldwave such as the insert+h which should call up a listing of
helpful Goldwave shortcuts. instead, I get helpful Windows shortcuts.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@outlook.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Tuesday, June 4, 2019, 7:16 PM
Subject: goldwave scripts not working properly


mario,
I attempted to send you a zip file of the scripts off list.
Let me know if you received it.
Richard


Check out my web site at:
www.turner42.com<https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com&;data=02%7C01%7C%7C633c05971fbe4621637e08d6bb714c96%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636902492616129219&sdata=9qG6zwn2QJ9Xe5fJyao6MewzLG36u7TAieLK72Tg19c%3D&reserved=0>
“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of
flying. There is an art, it says, or rather, a knack to flying. The
knack lies in learning how to throw yourself at the ground and miss."
--Douglas Adams, from Life, The Universe and Everything, p.59


The most common way people give up their power is by thinking they don't
have any." -- Alice Walker


On Jun 4, 2019, at 8:28 AM, Mario
<mrb620@hotmail.com<mailto:mrb620@hotmail.com>> wrote:

I noticed when I unload/reload JAWS, I hear that it is loading Goldwave
version 4 settings, but then I can't shut off labels because I don't
need to hear when I press keys like for starting, pausing, stopping
recording or playback, not to mention pressing the other function keys.

-------- Original Message --------
From: dennis [mailto:dennisc67@gmail.com]
To: main@jfw.groups.io<mailto:main@jfw.groups.io>
Date: Tuesday, June 4, 2019, 10:38 AM
Subject: goldwave scripts not working properly

after you open goldwave... unload and reload jaws. i have to do this
every time
but it works.

On 6/4/2019 8:51 AM, Richard Turner wrote:
Well, Mike B. sent steps to try to get the Script version, but all it
did was show me that the scripts were not loading the way I thought they
were.
I copied them to the appdata roaming, etc., folder and at least I know
they are loading properly, but I still cannot duplicate your issue.
The combo boxes read as I arrow up and down with all the settings I've
tried.
And, I still have no idea if the scripts are version 1.6 or version 2.
I suspect version 2, but I'm not sure.
For what it is worth, the date on the goldwave.ini and the rest of the
files in the GoldWave scripts is 06/04/2017.

Richard



Check out my web site at:www.turner42.com<http://www.turner42.com>;
“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of
flying. There is an art, it says, or rather, a knack to flying. The
knack lies in learning how to throw yourself at the ground and miss."
--Douglas Adams, from Life, The Universe and Everything, p.59

-----Original Message-----
From:main@jfw.groups.io<mailto:main@jfw.groups.io>
<main@jfw.groups.io<mailto:main@jfw.groups.io>> On Behalf Of Mario
Sent: Monday, June 3, 2019 7:47 AM
To:main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: Re: goldwave scripts not working properly

well, I don't know what's wrong. the scripts worked just fine when I had
JAWS 16 and 18. I had done a repair on 2018 but the problem remains.

Richard, are the scripts that you have version 2.0 or 1.6? there is a
keystroke to show that information, but forgot what it is. it's not
insert+q but something else.

if anyone has a constructive suggestion, please do tell.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@outlook.com]
To:main@jfw.groups.io<mailto:main@jfw.groups.io>
<main@jfw.groups.io<mailto:main@jfw.groups.io>>
Date: Tuesday, May 28, 2019, 1:10 PM
Subject: goldwave scripts not working properly

Mario,
I believe I have the same scripts, but they are in the folder:
"C:\ProgramData\Freedom Scientific\JAWS\2019\Scripts\enu\"

I confirmed this by opening the Jaws menu, then on the utilities menu,
explore utilities, then explore scripts, which is where I confirmed that
path, and the scripts work fine for me.

Richard



Check out my web site
at:https://nam04.safelinks.protection.outlook.com/?url=www.turner42.com&;amp;data=02%7C01%7C%7Cab44ba3268ff4f7a9f2408d6e83268a4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636951700526978833&amp;sdata=Q3%2BrgHgK2JGocwypfIt%2FkVFyBOLu2fN%2BraBTYf%2BCmHM%3D&amp;reserved=0
“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of
flying. There is an art, it says, or rather, a knack to flying. The
knack lies in learning how to throw yourself at the ground and miss."
--Douglas Adams, from Life, The Universe and Everything, p.59

-----Original Message-----
From:main@jfw.groups.io<mailto:main@jfw.groups.io>
<main@jfw.groups.io<mailto:main@jfw.groups.io>> On Behalf Of Mario
Sent: Tuesday, May 28, 2019 8:27 AM
To:main@jfw.groups.io<mailto:main@jfw.groups.io>
Subject: goldwave scripts not working properly

the file that I downloaded is goldwave_5-6_jaws_scripts_2_0.zip and
after extracting the files and copying them to the appropriate location
(see below), when I check the script version, it is 1.6. does anyone
have the latest scripts for Goldwave, or direct me where to get them?

in the meantime, I have copied all of the files to the following folder:

"C:\Users\Mario\AppData\Roaming\Freedom Scientific\JAWS\2018\Settings\enu\"

but when I attempt to select a choice in an edit combo, I cannot simply
arrow down or up to different choices unless I press alt+down arrow to
open the dialog, arrow to the spoken choice, and press alt+up arrow
before I can preview the change. I did not have to do this previously
when I had JAWS 16. now that I use 2018, what can I do to fix this dilemma?














--
Dennis Cornelison

<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.avast.com%2Fsig-email%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient%26utm_term%3Dicon&;amp;data=02%7C01%7C%7C3601c7daf88947482dc008d6e9014836%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636952589041969505&amp;sdata=jQulfw2cWhFr%2BJnjp5ztBWkqkP5a6rMY9jtK0jZV8sA%3D&amp;reserved=0>
Virus-free.
https://nam02.safelinks.protection.outlook.com/?url=www.avast.com&;amp;data=02%7C01%7C%7C3601c7daf88947482dc008d6e9014836%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636952589041979504&amp;sdata=QmfhA7gdSEXsraP%2BUc632F4iOh3Rs9jT%2FRlSK0tAS3E%3D&amp;reserved=0
<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.avast.com%2Fsig-email%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient%26utm_term%3Dlink&;amp;data=02%7C01%7C%7C3601c7daf88947482dc008d6e9014836%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636952589041979504&amp;sdata=o5dVmNN39jLwvKoOVQcSqLxHYkEBUs6X9cenjSRPzkE%3D&amp;reserved=0>


<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

.


Re: goldwave scripts not working properly

Richard Turner
 


mario,
I attempted to send you a zip file of the scripts off list.
Let me know if you received it.
Richard


Check out my web site at: www.turner42.com

“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.  There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." --Douglas Adams, from Life, The Universe and Everything, p.59


The most common way people give up their power is by thinking they don't have any." -- Alice Walker



On Jun 4, 2019, at 8:28 AM, Mario <mrb620@...> wrote:

I noticed when I unload/reload JAWS, I hear that it is loading Goldwave
version 4 settings, but then I can't shut off labels because I don't
need to hear when I press keys like for starting, pausing, stopping
recording or playback, not to mention pressing the other function keys.

-------- Original Message --------
From: dennis [mailto:dennisc67@...]
To: main@jfw.groups.io
Date: Tuesday, June 4, 2019, 10:38 AM
Subject: goldwave scripts not working properly

after you open goldwave... unload and reload jaws. i have to do this
every time
but it works.

On 6/4/2019 8:51 AM, Richard Turner wrote:
Well, Mike B. sent steps to try to get the Script version, but all it
did was show me that the scripts were not loading the way I thought they
were.
I copied them to the appdata roaming, etc., folder and at least I know
they are loading properly, but I still cannot duplicate your issue.
The combo boxes read as I arrow up and down with all the settings I've
tried.
And, I still have no idea if the scripts are version 1.6 or version 2.
I suspect version 2, but I'm not sure.
For what it is worth, the date on the goldwave.ini and the rest of the
files in the GoldWave scripts is 06/04/2017.

Richard



Check out my web site at:www.turner42.com
“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of
flying.  There is an art, it says, or rather, a knack to flying. The
knack lies in learning how to throw yourself at the ground and miss."
--Douglas Adams, from Life, The Universe and Everything, p.59

-----Original Message-----
From:main@jfw.groups.io  <main@jfw.groups.io>  On Behalf Of Mario
Sent: Monday, June 3, 2019 7:47 AM
To:main@jfw.groups.io
Subject: Re: goldwave scripts not working properly

well, I don't know what's wrong. the scripts worked just fine when I had
JAWS 16 and 18. I had done a repair on 2018 but the problem remains.

Richard, are the scripts that you have version 2.0 or 1.6? there is a
keystroke to show that information, but forgot what it is. it's not
insert+q but something else.

if anyone has a constructive suggestion, please do tell.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@...]
To:main@jfw.groups.io  <main@jfw.groups.io>
Date: Tuesday, May 28, 2019, 1:10 PM
Subject: goldwave scripts not working properly

Mario,
I believe I have the same scripts, but they are in the folder:
"C:\ProgramData\Freedom Scientific\JAWS\2019\Scripts\enu\"

I confirmed this by opening the Jaws menu, then on the utilities menu,
explore utilities, then explore scripts, which is where I confirmed that
path, and the scripts work fine for me.

Richard



Check out my web site
at:https://nam04.safelinks.protection.outlook.com/?url=www.turner42.com&amp;data=02%7C01%7C%7Cab44ba3268ff4f7a9f2408d6e83268a4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636951700526978833&amp;sdata=Q3%2BrgHgK2JGocwypfIt%2FkVFyBOLu2fN%2BraBTYf%2BCmHM%3D&amp;reserved=0
“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of
flying.  There is an art, it says, or rather, a knack to flying. The
knack lies in learning how to throw yourself at the ground and miss."
--Douglas Adams, from Life, The Universe and Everything, p.59

-----Original Message-----
From:main@jfw.groups.io  <main@jfw.groups.io>  On Behalf Of Mario
Sent: Tuesday, May 28, 2019 8:27 AM
To:main@jfw.groups.io
Subject: goldwave scripts not working properly

the file that I downloaded is goldwave_5-6_jaws_scripts_2_0.zip and
after extracting the files and copying them to the appropriate location
(see below), when I check the script version, it is 1.6. does anyone
have the latest scripts for Goldwave, or direct me where to get them?

in the meantime, I have copied all of the files to the following folder:

"C:\Users\Mario\AppData\Roaming\Freedom Scientific\JAWS\2018\Settings\enu\"

but when I attempt to select a choice in an edit combo, I cannot simply
arrow down or up to different choices unless I press alt+down arrow to
open the dialog, arrow to the spoken choice, and press alt+up arrow
before I can preview the change. I did not have to do this previously
when I had JAWS 16. now that I use 2018, what can I do to fix this dilemma?














--
Dennis Cornelison

<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.avast.com%2Fsig-email%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient%26utm_term%3Dicon&amp;data=02%7C01%7C%7C3601c7daf88947482dc008d6e9014836%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636952589041969505&amp;sdata=jQulfw2cWhFr%2BJnjp5ztBWkqkP5a6rMY9jtK0jZV8sA%3D&amp;reserved=0>
   Virus-free. https://nam02.safelinks.protection.outlook.com/?url=www.avast.com&amp;data=02%7C01%7C%7C3601c7daf88947482dc008d6e9014836%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636952589041979504&amp;sdata=QmfhA7gdSEXsraP%2BUc632F4iOh3Rs9jT%2FRlSK0tAS3E%3D&amp;reserved=0
<https://nam02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.avast.com%2Fsig-email%3Futm_medium%3Demail%26utm_source%3Dlink%26utm_campaign%3Dsig-email%26utm_content%3Demailclient%26utm_term%3Dlink&amp;data=02%7C01%7C%7C3601c7daf88947482dc008d6e9014836%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636952589041979504&amp;sdata=o5dVmNN39jLwvKoOVQcSqLxHYkEBUs6X9cenjSRPzkE%3D&amp;reserved=0>


<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

.






moderated Re: ExCel 2019 inability to use arrow keys

Rick Mladek
 

When this occurs, I realized my scroll lock was on, turn scroll lock off if this occurs.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Tuesday, June 4, 2019 6:08 PM
To: main@jfw.groups.io
Subject: Re: ExCel 2019 inability to use arrow keys

 

Ok, I have a slight delay in JAWS response when using arrow keys but they work.  JAWS and Excel have a love / hate relationship.  May want to run this by tech support at Freedom.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Tuesday, June 4, 2019 1:27 PM
To: main@jfw.groups.io
Subject: ExCel 2019 inability to use arrow keys

 

Hi all,

 

With my new Office 2019, I am now having a little issue with ExCel. When attempting to move around the cells with arrow keys, this is not possible. I have to use the enter and tab keys to maneuver around. Is there a setting to allow the use of arrow keys? All help and comments appreciated.

 

Rick

 


moderated Re: ExCel 2019 inability to use arrow keys

Dan Longmore
 

Ok, I have a slight delay in JAWS response when using arrow keys but they work.  JAWS and Excel have a love / hate relationship.  May want to run this by tech support at Freedom.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Tuesday, June 4, 2019 1:27 PM
To: main@jfw.groups.io
Subject: ExCel 2019 inability to use arrow keys

 

Hi all,

 

With my new Office 2019, I am now having a little issue with ExCel. When attempting to move around the cells with arrow keys, this is not possible. I have to use the enter and tab keys to maneuver around. Is there a setting to allow the use of arrow keys? All help and comments appreciated.

 

Rick

 


moderated Re: E-mail Message Fields Have Disappeared Again

Tom Behler
 

Mike:

 

I used to get other fields by pressing alt 1, 2, and 3.  I think they were from, to, and the date of the e-mail.

 

I found access to those fields with this method to be very quick and useful.

 

Tom Behler

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Michael Mote
Sent: Tuesday, June 4, 2019 4:27 PM
To: main@jfw.groups.io
Subject: Re: E-mail Message Fields Have Disappeared Again

 

Hi Tom.  When I press alt plus the number four on my number row, I hear JAWS say CC.  Alt plus five, I hear JAWS say subject, and then the subject.  Alt plus six, I hear the BCC field.  Can you try those key strokes and see if you get this feedback?  Would that be what you're looking for?

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, June 4, 2019 11:06 AM
To: jfw list <jfw@groups.io>
Subject: E-mail Message Fields Have Disappeared Again

 

Hello, everyone.

 

My e-mail header fields have disappeared again, in that they are now no longer able to be accessed via the alt 1, 2, 3, and 4 commands.

 

I used to be able to re-instate the fields via the following instructions, but these instructions no longer seem to work.

 

I’m using the latest build of Jaws 2019, and the Office 365 version of Outlook 2016 on this Windows 10 computer.

 

Thanks for any help.

 

Tom Behler

 

Instructions for restoring fields in an e-mail message if they disappear

 

If e-mail message fields disappear, and are not able to be accessed with the alt 1, 2, 3, or 4 commands, you must turn off features coming soon.

 

To do this, put focus on your in-box, and then hit the alt key to get to the home menu.

 

Then, arrow left once or twice, and you should get to the check box to turn this function on or off.

 

If it says “turn features coming soon off”, you know it’s on.  Just un-check the box, and you should be ok.

 

Note:  You will have to re-start Outlook and possibly even your computer for the change to take effect.

 

 

 

 


moderated Re: Finding my list of friends in Facebook?

Dan Longmore
 

Hi,

  I”Friends” from the Facebook menu tab in the mobile app.  Under the tab you can hide or show all shortcuts.  I choose show and Friends appear.  From there I can see potential friends or click on the “Friends” button to get a list of current friends. 

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, June 4, 2019 1:45 PM
To: main@jfw.groups.io
Subject: Re: Finding my list of friends in Facebook?

 

Yes, I could use that tutorial also.

 

Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13

 

From: Tim Ford

Sent: Tuesday, June 04, 2019 12:10 PM

Subject: Finding my list of friends in Facebook?

 

Hello All,

 

I cannot remember how to get into the list of friends tied to my Facebook account.  I am using the mobile web page version of Facebook.  I have found it before, but now cannot.  Any ideas?  Also, if someone knows of a good Facebook JAWS tutorial, please let me know.

 

Sincerely,

Timothy Ford

 


moderated More Office 2019 questions...

Rick Mladek
 

Hi again all,

 

Reviewing a Microsoft Word document, I arrow down through the information and continuously hear level one and then level zero. How do I turn this off?

 

Thanks,

 

Rick


moderated Re: E-mail Message Fields Have Disappeared Again

Michael Mote
 

Hi Tom.  When I press alt plus the number four on my number row, I hear JAWS say CC.  Alt plus five, I hear JAWS say subject, and then the subject.  Alt plus six, I hear the BCC field.  Can you try those key strokes and see if you get this feedback?  Would that be what you're looking for?

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Tom Behler
Sent: Tuesday, June 4, 2019 11:06 AM
To: jfw list <jfw@groups.io>
Subject: E-mail Message Fields Have Disappeared Again

 

Hello, everyone.

 

My e-mail header fields have disappeared again, in that they are now no longer able to be accessed via the alt 1, 2, 3, and 4 commands.

 

I used to be able to re-instate the fields via the following instructions, but these instructions no longer seem to work.

 

I’m using the latest build of Jaws 2019, and the Office 365 version of Outlook 2016 on this Windows 10 computer.

 

Thanks for any help.

 

Tom Behler

 

Instructions for restoring fields in an e-mail message if they disappear

 

If e-mail message fields disappear, and are not able to be accessed with the alt 1, 2, 3, or 4 commands, you must turn off features coming soon.

 

To do this, put focus on your in-box, and then hit the alt key to get to the home menu.

 

Then, arrow left once or twice, and you should get to the check box to turn this function on or off.

 

If it says “turn features coming soon off”, you know it’s on.  Just un-check the box, and you should be ok.

 

Note:  You will have to re-start Outlook and possibly even your computer for the change to take effect.

 

 

 

 


moderated Re: Finding my list of friends in Facebook?

Marty Hutchings
 

Yes, I could use that tutorial also.
 
Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13
 

From: Tim Ford
Sent: Tuesday, June 04, 2019 12:10 PM
Subject: Finding my list of friends in Facebook?
 

Hello All,

 

I cannot remember how to get into the list of friends tied to my Facebook account.  I am using the mobile web page version of Facebook.  I have found it before, but now cannot.  Any ideas?  Also, if someone knows of a good Facebook JAWS tutorial, please let me know.

 

Sincerely,

Timothy Ford

 

16041 - 16060 of 85675