Date   

moderated Re: Hello JM Can you write me off list? Addison here

John Doering
 

Hello:

See below:

To unsubscribe from this mailing list, send a message to jfw+unsubscribe@groups.io

HTH,

John

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Thursday, June 20, 2019 8:38 AM
To: main@jfw.groups.io
Subject: Re: Hello JM Can you write me off list? Addison here

 

I mean JMCasey  Can you write me off list ?

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of O.Addison Gethers via Groups.Io
Sent: Wednesday, June 19, 2019 4:28 PM
To: jfw@groups.io
Subject: Hello JM Can you write me off list? Addison here

 

Hello JM  Can you write me off list please? My email address is O.AddisonGethers@...

Thank you

Addison


moderated Re: Hello JM Can you write me off list? Addison here

O.Addison Gethers
 

I mean JMCasey  Can you write me off list ?

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of O.Addison Gethers via Groups.Io
Sent: Wednesday, June 19, 2019 4:28 PM
To: jfw@groups.io
Subject: Hello JM Can you write me off list? Addison here

 

Hello JM  Can you write me off list please? My email address is O.AddisonGethers@...

Thank you

Addison


moderated Re: Can not install Jaws 2019 demo on Windows 7 64 bit what ever I do

Chris Hill
 

Have you contacted technical support?  That is what it says to do.



On 6/20/2019 02:26, Chris via Groups.Io wrote:

Not really, but make sure you are using the 64bit installer on a 64bit machine rather than the the 32bit installer which worked on your other machine

 

And if that fails completely remove jaws from your machine and restart and try again

 

And if that fails maybe consider doing a system restore to a point when it did install or before jaws was installed initially

 

Other than that I have no idea as the error is so generic its impossible to find a solution

 

Good luck anyway

 

 

From: adel akbari
Sent: 20 June 2019 07:57
To: main@jfw.groups.io
Subject: Can not install Jaws 2019 demo on Windows 7 64 bit what ever I do

 

Hi.

Whenever I have tried to Install Jaws 2019 demo on my Windows 7 64 bit.

each time the installer shows this error message:

 

The setup failed to process the "FSVideoIntercept64" component.

Restart your computer and run the setup again. If the error continues,

contact technical support.

 

Code: 80070643

 

I tried Jaws 2019 April, May, and June release and encountered this error.

the other thing is that in the same system, Jaws 18 and older versions

installs well.

Also, I should say that I tried installing Jaws 2019 on my another

Windows 7 32 bit machine, and it installed without problem.

 

does anyone has any sollution for this?

 

 

 


moderated Re: jaws 2019?

Les Kriegler
 

The one issue I have with 2019 is that I can no longer use Microsoft Mail. It crashes when I try to navigate the Inbox. I contacted Microsoft Support, we did a remote session and they confirmed the issue. I then contacted support at FS when I learned that NVDA and Mail work fine together Awaiting a response from FS.

Les

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jaffar Sidek
Sent: Wednesday, June 19, 2019 7:22 PM
To: main@jfw.groups.io
Subject: Re: jaws 2019?

Hi all. To be fair, Windows 10 handles accessibility differently from it's legacy versions, and Jaws like other screen readers have had to make serious adjustments to how it deals with "seeing" the screen and such, hence it's perceived incompetence in some areas. Screen readers are not independent applications as such but rely on the stability of their environment to work well, and it cannot be said that Windows 10 is yet as stable as it can be. I am not for Jaws or anything like that, but in this case, i can see what Jaws and screen readers in general have to contend with. Cheers!


On 6/19/2019 9:20 PM, Shirley Tracy wrote:


Kendra,



Thank you for posting this. I’d like to hear feedback as well. I have not yet installed my 2019 JAWS because I’m hearing of too many bugs. 2018 works adequately for the present, but I know I’ll have to upgrade sooner or later.



Cheerfully,

Shirley Tracy



From: Kendra Schafer <mailto:redwing731@gmail.com>
Sent: Wednesday, June 19, 2019 3:24 AM
To: main@jfw.groups.io <mailto:main@jfw.groups.io> ; main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: jaws 2019?



Hi all! I currently have JAWS 2018 installed on my computer alongside JAWS 2019. I have tried JAWS 2019 3 or 4 times. So far, I'm not impressed! Each time I tried JAWS 2019, I have run into bugs. The last time that I tried it, the update was a bad corrupted version. It wouldn't work with my Dell laptop PC computer at all. My tech teacher also got the same exact result. Because JAWS 2019 is one of the worst worst versions of softwhere that I have run into, into, I want to know the latest news from the user’s point of view. I don’t need someone sending me Freedom Scientific resources because they have overlooked some major bugs. I want feedback from users experiences before I give that vertion of JAWS another try. I have stuck with NVDA and JAWS 2018 instead.





Thank you for taking the time to read this Email!

Blessed be!!!

Kendra Schaber

Chemeketa Community College,

350 Org,

Citizen’s Climate Lobby,

National Federation of the Blind of Oregon,

Capitol Chapter,

Salem, Oregon.

Home Email:

Redwing731@gmail.com <mailto:Redwing731@gmail.com>

Chemeketa Community College Email:

Kschaber@my.Chemeketa.edu <mailto:Kschaber@my.Chemeketa.edu>

Phone:

971-599-9991

“When the student is ready, the teacher will appear”, Author unknown.

SE.

Sent from my Gmail Email

















































































































































































































































From: main@jfw.groups.io <mailto:main@jfw.groups.io> on behalf of dennis <dennisc67@gmail.com> <mailto:dennisc67@gmail.com>
Sent: Tuesday, June 18, 2019 15:16
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: jaws 2019 and latest version of thunderbird



all that does is open the atachment.

On 6/18/2019 4:41 PM, Curtis Delzer wrote:

did you press enter on any attachment?

Curtis Delzer
HS
K 6 V F O
Rialto, CA

curtis@calweb.com <mailto:curtis@calweb.com>

On 6/18/2019 10:56 AM, dennis wrote:

is anyone else having problems with atachments lists in thunderbird? jaws says horisontal list box and won't list the atachments. it says the number of atachments in the list but won't show them. anyone else having this issue?

--
Dennis Cornelison



<https://www.avast.com/sig-email?utm_medium=email&;utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>


Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&;utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>

--
Dennis Cornelison <https://www.avast.com/sig-email?utm_medium=email&;utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>



<https://www.avast.com/sig-email?utm_medium=email&;utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>

--
Pictures paint a thousand words;
Melodies paint a thousand dreams;
Music paints a thousand worlds;
Movies light up fantasy screens.


moderated Re: Outlook issue

Les Kriegler
 

It works here, running latest build of Jaws 2019 and latest build of Windows 10.

Les

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 9:09 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

Yes, but the common control +y no longer working



From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dale Alton
Sent: Wednesday, June 19, 2019 8:54 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue



Does a "ctrl+shift+I" put you back in the inbox?



Denver Dale



From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kevin Meyers
Sent: Wednesday, June 19, 2019 6:22 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue



I have misplaced my notes and I don’t remember. I would think you can call Microsoft accessibility and they can show you what was done.



From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 12:04 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue



What correction to the draft folder are you talking about?



From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of Kevin Meyers
Sent: Wednesday, June 19, 2019 12:13 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: Outlook issue



I had the same problem. I talked with Microsoft accessibility and they made a correction to the draft folder. Sorry I don’t have my notes.



From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of Sharon Ballantyne
Sent: Wednesday, June 19, 2019 10:10 AM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: Outlook issue



Hi all,



I have never been able to use control y from drafts to navigate to another folder/box except using control shift i. Control y has always worked to bring up the move command from any other folder, just not drafts.



Sharon





From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 10:59 AM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: Outlook issue



Dean, Am I to understand you also get stuck in drafts and a basic control Y command is not working? Yes, the shift/control I is working for me, as well. Should Freedom be told about this glitch or Microsoft?







From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of Dean Martineau
Sent: Wednesday, June 19, 2019 10:36 AM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: Outlook issue



I can replicate that, but there is a solution. From Drafts, I can use the shortcut shift+ctrl+I to get back to the inbox.



Dean





From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 10:28 AM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Outlook issue



Hi all,



I’m using Office 2019 and when in Outlook, I can go to my drafts folder control +y and hit the d key until I hear drafts and hit enter. When in the drafts folder, I attempt to repeat to go back to the inbox or any other folder and cannot exit the drafts folder. I have to close Outlook and re-start to get out of the said drafts folder and back into inbox or any other chosen folder.



Any suggestions? I’m using Windows 10 with latest update, I’m using Jaws 2019 with latest update and again, Office 2019.



Thanks for all suggestions/help to fix this headache,



Rick


moderated Re: Can not install Jaws 2019 demo on Windows 7 64 bit what ever I do

Richard Turner
 

You could always do what the error message said and contact technical support with that error message.
I suspect since Jaws 2019 has one installer that detects if your system is 32 or 64 bit; that there isn't another installer unless the demos are different.
It is probably a video driver or video card issue of some kind; but since I'm not tech support, that is likely a useless guess.
Richard

 

Check out my web site at: www.turner42.com

“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.  There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." --Douglas Adams, from Life, The Universe and Everything, p.59


The most common way people give up their power is by thinking they don't have any." -- Alice Walker



On Jun 20, 2019, at 12:26 AM, Chris via Groups.Io <chrismedley@...> wrote:

Not really, but make sure you are using the 64bit installer on a 64bit machine rather than the the 32bit installer which worked on your other machine

 

And if that fails completely remove jaws from your machine and restart and try again

 

And if that fails maybe consider doing a system restore to a point when it did install or before jaws was installed initially

 

Other than that I have no idea as the error is so generic its impossible to find a solution

 

Good luck anyway

 

 

From: adel akbari
Sent: 20 June 2019 07:57
To: main@jfw.groups.io
Subject: Can not install Jaws 2019 demo on Windows 7 64 bit what ever I do

 

Hi.

Whenever I have tried to Install Jaws 2019 demo on my Windows 7 64 bit.

each time the installer shows this error message:

 

The setup failed to process the "FSVideoIntercept64" component.

Restart your computer and run the setup again. If the error continues,

contact technical support.

 

Code: 80070643

 

I tried Jaws 2019 April, May, and June release and encountered this error.

the other thing is that in the same system, Jaws 18 and older versions

installs well.

Also, I should say that I tried installing Jaws 2019 on my another

Windows 7 32 bit machine, and it installed without problem.

 

does anyone has any sollution for this?

 

 

 


moderated Re: Can not install Jaws 2019 demo on Windows 7 64 bit what ever I do

Chris
 

Not really, but make sure you are using the 64bit installer on a 64bit machine rather than the the 32bit installer which worked on your other machine

 

And if that fails completely remove jaws from your machine and restart and try again

 

And if that fails maybe consider doing a system restore to a point when it did install or before jaws was installed initially

 

Other than that I have no idea as the error is so generic its impossible to find a solution

 

Good luck anyway

 

 

From: adel akbari
Sent: 20 June 2019 07:57
To: main@jfw.groups.io
Subject: Can not install Jaws 2019 demo on Windows 7 64 bit what ever I do

 

Hi.

Whenever I have tried to Install Jaws 2019 demo on my Windows 7 64 bit.

each time the installer shows this error message:

 

The setup failed to process the "FSVideoIntercept64" component.

Restart your computer and run the setup again. If the error continues,

contact technical support.

 

Code: 80070643

 

I tried Jaws 2019 April, May, and June release and encountered this error.

the other thing is that in the same system, Jaws 18 and older versions

installs well.

Also, I should say that I tried installing Jaws 2019 on my another

Windows 7 32 bit machine, and it installed without problem.

 

does anyone has any sollution for this?

 

 

 


moderated Re: Outlook issue

CJ &AA MAY
 

I am using Jaws 18 with Office 365 and control y still works fine for me.

I press control y and then arrow down onceto gmail and then right arrow to open the list which then offers me sent mail, bin etc. etc.

Alison

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: 20 June 2019 02:09
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Yes, but the common control +y no longer working

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dale Alton
Sent: Wednesday, June 19, 2019 8:54 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Does a "ctrl+shift+I" put you back in the inbox?

 

Denver Dale

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kevin Meyers
Sent: Wednesday, June 19, 2019 6:22 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I have misplaced my notes and I don’t remember. I would think you can call Microsoft accessibility and they can show you what was done.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 12:04 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

What correction to the draft folder are you talking about?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kevin Meyers
Sent: Wednesday, June 19, 2019 12:13 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I had the same problem. I talked with Microsoft accessibility and they made a correction to the draft folder. Sorry I don’t have my notes.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sharon Ballantyne
Sent: Wednesday, June 19, 2019 10:10 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Hi all,

 

I have never been able to use control y from drafts to navigate to another folder/box except using control shift i. Control y has always worked to bring up the move command from any other folder, just not drafts.

 

Sharon

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 10:59 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Dean, Am I to understand you also get stuck in drafts and a basic control Y command is not working? Yes, the shift/control I is working for me, as well. Should Freedom be told about this glitch or Microsoft?

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dean Martineau
Sent: Wednesday, June 19, 2019 10:36 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I can replicate that, but there is a solution. From Drafts, I can use the shortcut shift+ctrl+I to get back to the inbox.

 

Dean

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 10:28 AM
To: main@jfw.groups.io
Subject: Outlook issue

 

Hi all,

 

I’m using Office 2019 and when in Outlook, I can go to my drafts folder control +y and hit the d key until I hear drafts and hit enter. When in the drafts folder, I attempt to repeat to go back to the inbox or any other folder and cannot exit the drafts folder. I have to close Outlook and re-start to get out of the said drafts folder and back into inbox or any other chosen folder.

 

Any suggestions? I’m using Windows 10 with latest update, I’m using Jaws 2019 with latest update and again, Office 2019.

 

Thanks for all suggestions/help to fix this headache,

 

Rick

 


moderated Can not install Jaws 2019 demo on Windows 7 64 bit what ever I do

adel akbari <adelakbari@...>
 

Hi.
Whenever I have tried to Install Jaws 2019 demo on my Windows 7 64 bit.
each time the installer shows this error message:

The setup failed to process the "FSVideoIntercept64" component.
Restart your computer and run the setup again. If the error continues,
contact technical support.

Code: 80070643

I tried Jaws 2019 April, May, and June release and encountered this error.
the other thing is that in the same system, Jaws 18 and older versions
installs well.
Also, I should say that I tried installing Jaws 2019 on my another
Windows 7 32 bit machine, and it installed without problem.

does anyone has any sollution for this?


moderated Re: Outlook issue

 

Enter works fine if you are going to a new folder, if you are in the Inbox, go to the folder list with Control + Shift + Tab or Shift + F6 and then you want to go back into the Inbox you have to press F6.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Zel Iscel
Sent: Wednesday, June 19, 2019 10:43 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Control + Shift + Tab and Shift + F6 both get me into the folder list but won’t allow me to enter any of the folders by pressing space or enter or the right arrow. Is there another command to enter the folder?

 

Control + y works best for me to get to the folders list and enter a folder.

 

BTW I’m still using Jaws 2018 with Windows 1809 (OS Build 17763.557).

 

Cheers

Zel

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, 20 June 2019 12:42 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

 

Shift + F6 also works for me to go back out of Drafts and into the folder list.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 7:50 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Hi Robin,

 

Thank you so very much, this worked. I appreciate you and your assistance…

 

Rick

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: Wednesday, June 19, 2019 10:40 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I’m not on Outlook 2019 yet, but offer the following keystroke to try.  Hitting Control Shift I takes you back to your inbox from wherever you are in Outlook.  See if that will work in this situation.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 8:28 AM
To: main@jfw.groups.io
Subject: Outlook issue

 

Hi all,

 

I’m using Office 2019 and when in Outlook, I can go to my drafts folder control +y and hit the d key until I hear drafts and hit enter. When in the drafts folder, I attempt to repeat to go back to the inbox or any other folder and cannot exit the drafts folder. I have to close Outlook and re-start to get out of the said drafts folder and back into inbox or any other chosen folder.

 

Any suggestions? I’m using Windows 10 with latest update, I’m using Jaws 2019 with latest update and again, Office 2019.

 

Thanks for all suggestions/help to fix this headache,

 

Rick

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Outlook issue

Rick Mladek
 

Yes, but the common control +y no longer working

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dale Alton
Sent: Wednesday, June 19, 2019 8:54 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Does a "ctrl+shift+I" put you back in the inbox?

 

Denver Dale

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kevin Meyers
Sent: Wednesday, June 19, 2019 6:22 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I have misplaced my notes and I don’t remember. I would think you can call Microsoft accessibility and they can show you what was done.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 12:04 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

What correction to the draft folder are you talking about?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kevin Meyers
Sent: Wednesday, June 19, 2019 12:13 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I had the same problem. I talked with Microsoft accessibility and they made a correction to the draft folder. Sorry I don’t have my notes.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sharon Ballantyne
Sent: Wednesday, June 19, 2019 10:10 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Hi all,

 

I have never been able to use control y from drafts to navigate to another folder/box except using control shift i. Control y has always worked to bring up the move command from any other folder, just not drafts.

 

Sharon

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 10:59 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Dean, Am I to understand you also get stuck in drafts and a basic control Y command is not working? Yes, the shift/control I is working for me, as well. Should Freedom be told about this glitch or Microsoft?

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dean Martineau
Sent: Wednesday, June 19, 2019 10:36 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I can replicate that, but there is a solution. From Drafts, I can use the shortcut shift+ctrl+I to get back to the inbox.

 

Dean

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 10:28 AM
To: main@jfw.groups.io
Subject: Outlook issue

 

Hi all,

 

I’m using Office 2019 and when in Outlook, I can go to my drafts folder control +y and hit the d key until I hear drafts and hit enter. When in the drafts folder, I attempt to repeat to go back to the inbox or any other folder and cannot exit the drafts folder. I have to close Outlook and re-start to get out of the said drafts folder and back into inbox or any other chosen folder.

 

Any suggestions? I’m using Windows 10 with latest update, I’m using Jaws 2019 with latest update and again, Office 2019.

 

Thanks for all suggestions/help to fix this headache,

 

Rick

 


moderated Re: Outlook issue

Dale Alton <blinkydale@...>
 

Does a "ctrl+shift+I" put you back in the inbox?

 

Denver Dale

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Kevin Meyers
Sent: Wednesday, June 19, 2019 6:22 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I have misplaced my notes and I don’t remember. I would think you can call Microsoft accessibility and they can show you what was done.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 12:04 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

What correction to the draft folder are you talking about?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kevin Meyers
Sent: Wednesday, June 19, 2019 12:13 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I had the same problem. I talked with Microsoft accessibility and they made a correction to the draft folder. Sorry I don’t have my notes.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sharon Ballantyne
Sent: Wednesday, June 19, 2019 10:10 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Hi all,

 

I have never been able to use control y from drafts to navigate to another folder/box except using control shift i. Control y has always worked to bring up the move command from any other folder, just not drafts.

 

Sharon

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 10:59 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Dean, Am I to understand you also get stuck in drafts and a basic control Y command is not working? Yes, the shift/control I is working for me, as well. Should Freedom be told about this glitch or Microsoft?

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dean Martineau
Sent: Wednesday, June 19, 2019 10:36 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I can replicate that, but there is a solution. From Drafts, I can use the shortcut shift+ctrl+I to get back to the inbox.

 

Dean

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 10:28 AM
To: main@jfw.groups.io
Subject: Outlook issue

 

Hi all,

 

I’m using Office 2019 and when in Outlook, I can go to my drafts folder control +y and hit the d key until I hear drafts and hit enter. When in the drafts folder, I attempt to repeat to go back to the inbox or any other folder and cannot exit the drafts folder. I have to close Outlook and re-start to get out of the said drafts folder and back into inbox or any other chosen folder.

 

Any suggestions? I’m using Windows 10 with latest update, I’m using Jaws 2019 with latest update and again, Office 2019.

 

Thanks for all suggestions/help to fix this headache,

 

Rick

 


moderated Re: Outlook issue

Kevin Meyers <kevinmeyers@...>
 

I have misplaced my notes and I don’t remember. I would think you can call Microsoft accessibility and they can show you what was done.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 12:04 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

What correction to the draft folder are you talking about?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kevin Meyers
Sent: Wednesday, June 19, 2019 12:13 PM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I had the same problem. I talked with Microsoft accessibility and they made a correction to the draft folder. Sorry I don’t have my notes.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sharon Ballantyne
Sent: Wednesday, June 19, 2019 10:10 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Hi all,

 

I have never been able to use control y from drafts to navigate to another folder/box except using control shift i. Control y has always worked to bring up the move command from any other folder, just not drafts.

 

Sharon

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 10:59 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Dean, Am I to understand you also get stuck in drafts and a basic control Y command is not working? Yes, the shift/control I is working for me, as well. Should Freedom be told about this glitch or Microsoft?

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dean Martineau
Sent: Wednesday, June 19, 2019 10:36 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I can replicate that, but there is a solution. From Drafts, I can use the shortcut shift+ctrl+I to get back to the inbox.

 

Dean

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 10:28 AM
To: main@jfw.groups.io
Subject: Outlook issue

 

Hi all,

 

I’m using Office 2019 and when in Outlook, I can go to my drafts folder control +y and hit the d key until I hear drafts and hit enter. When in the drafts folder, I attempt to repeat to go back to the inbox or any other folder and cannot exit the drafts folder. I have to close Outlook and re-start to get out of the said drafts folder and back into inbox or any other chosen folder.

 

Any suggestions? I’m using Windows 10 with latest update, I’m using Jaws 2019 with latest update and again, Office 2019.

 

Thanks for all suggestions/help to fix this headache,

 

Rick

 


moderated Re: Jaws no longer reads the Windows 10 emoji panel

inamuddin khan
 

To me it is working but not announcing!

For example if I press win+; it starts working but it is not announcing anything!

😊😊  

With regards from Inamuddin with the Skype ID:

Charlsdarwin1

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

 

From: Sieghard Weitzel
Sent: Wednesday, June 19, 2019 9:15 PM
To: main@jfw.groups.io
Subject: Re: Jaws no longer reads the Windows 10 emoji panel

 

Hi Joseph and Ann,

 

I don't think the issue that Jaws 2019 does not read the emojis, for me it reads them just fine when I arrow around, it only does not announce anything at all when you open the emoji panel. Ann, I would maybe call Jaws support, I am on the Jaws beta list and nobody has reported that Jaws doesn't read the emoji panel, but I did file a bug report about Jaws not saying something like "Emoji panel open" when you press Windows Key + Period or Semi Colon.

 

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Joseph Lee

Sent: Tuesday, June 18, 2019 11:25 AM

To: main@jfw.groups.io

Subject: Re: Jaws no longer reads the Windows 10 emoji panel

 

Hi,

If it is what I think is happening, then it isn't JAWS at all - it might be Windows 10 Version 1903, and last time I heard from another forum, this problem was reported to Vispero.

Cheers,

Joseph

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Munawar Bijani

Sent: Tuesday, June 18, 2019 11:15 AM

To: main@jfw.groups.io

Subject: Re: Jaws no longer reads the Windows 10 emoji panel

 

Mine works fine, I just now tested it with JAWS 2019. Try pressing down arrow instead of left/right arrow. Up/down travel inside the category.

 

On 6/18/2019 2:09 PM, ann wrote:

> Hi,

> With the latest update to Jaws, I can now no longer read the Windows

> emoji panel. It apparently does pop up, and I can arrow around and

> pres Enter to insert emojis, but Jaws speaks nothing at all now.

> Is there a fix for this

> ~Ann?

>

 

 

 

 

 

 

 

 

 


moderated Re: jaws 2019?

Jaffar Sidek
 

Hi all.  To be fair, Windows 10 handles accessibility differently from it's legacy versions, and Jaws like  other screen readers have had to make serious adjustments to how it deals with "seeing" the screen and such, hence it's perceived    incompetence in some areas.  Screen readers are not independent applications as such but rely on the stability of their environment to work well, and it cannot be said that Windows 10 is yet as stable as it can be.  I am not for Jaws or anything like that, but in this case, i can see what Jaws and screen readers in general have to contend with.  Cheers!

On 6/19/2019 9:20 PM, Shirley Tracy wrote:

Kendra,

 

Thank you for posting this. I’d like to hear feedback as well. I have not yet installed my 2019 JAWS because I’m hearing of too many bugs. 2018 works adequately for the present, but I know I’ll have to upgrade sooner or later.

 

Cheerfully,

Shirley Tracy

 

From: Kendra Schafer
Sent: Wednesday, June 19, 2019 3:24 AM
To: main@jfw.groups.io; main@jfw.groups.io
Subject: Re: jaws 2019?

 

Hi all! I currently have JAWS 2018 installed on my computer alongside JAWS 2019. I have tried JAWS 2019 3 or 4 times. So far, I'm not impressed! Each time I tried JAWS 2019, I have run into bugs. The last time that I tried it, the update was a bad corrupted version. It wouldn't work with my Dell laptop PC computer at all. My tech teacher also got the same exact result. Because JAWS 2019 is one of the worst worst versions of softwhere that I have run into, into, I want to know the latest news from the user’s point of view. I don’t need someone sending me Freedom Scientific resources because they have overlooked some major bugs. I want feedback from users experiences before I give that vertion of JAWS another try. I have stuck with NVDA and JAWS 2018 instead.     

 

 

Thank you for taking the time to read this Email!

Blessed be!!!

Kendra Schaber

Chemeketa Community College,

350 Org,

Citizen’s Climate Lobby,

National Federation of the Blind of Oregon,

Capitol Chapter,

Salem, Oregon.

Home Email:

Chemeketa Community College Email:

Phone:

971-599-9991

“When the student is ready, the teacher will appear”, Author unknown.

SE.

Sent from my Gmail Email

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

From: main@jfw.groups.io on behalf of dennis <dennisc67@...>
Sent: Tuesday, June 18, 2019 15:16
To: main@jfw.groups.io
Subject: Re: jaws 2019 and latest version of thunderbird

 

all that does is open the atachment.

On 6/18/2019 4:41 PM, Curtis Delzer wrote:

did you press enter on any attachment?

Curtis Delzer 
HS
K 6 V F O
Rialto, CA
 
curtis@...

On 6/18/2019 10:56 AM, dennis wrote:

is anyone else having problems with atachments lists in thunderbird? jaws says horisontal list box and won't list the atachments. it says the number of atachments in the list but won't show them. anyone else having this issue?

--
Dennis Cornelison

 

-- 
Pictures paint a thousand words;
Melodies paint a thousand dreams;
Music paints a thousand worlds;
Movies light up fantasy screens.


moderated Re: Jaws no longer reads the Windows 10 emoji panel

Curtis Delzer
 

🤷‍♂️

as you see jfw in this case with t-bird is properly announcing not only the opening of the panel, but the proper icons.

so I shrugged? or hopefully will do something else more appropriate.👍

Curtis Delzer 
HS
K 6 V F O
Rialto, CA

curtis@...
On 6/19/2019 11:32 AM, ann wrote:

For me, Jaws announces nothing but the title of whatever edit window I am working in, but no imojis are spoken.

This behavior only started with the latest JFW updates, which is why I originally thought it was a Jaws problem.

~Ann


On Wed, Jun 19, 2019 at 12:15 PM, Sieghard Weitzel wrote:
Hi Joseph and Ann,

I don't think the issue that Jaws 2019 does not read the emojis, for me it reads them just fine when I arrow around, it only does not announce anything at all when you open the emoji panel. Ann, I would maybe call Jaws support, I am on the Jaws beta list and nobody has reported that Jaws doesn't read the emoji panel, but I did file a bug report about Jaws not saying something like "Emoji panel open" when you press Windows Key + Period or Semi Colon.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Joseph Lee
Sent: Tuesday, June 18, 2019 11:25 AM
To: main@jfw.groups.io
Subject: Re: Jaws no longer reads the Windows 10 emoji panel

Hi,
If it is what I think is happening, then it isn't JAWS at all - it might be Windows 10 Version 1903, and last time I heard from another forum, this problem was reported to Vispero.
Cheers,
Joseph

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Munawar Bijani
Sent: Tuesday, June 18, 2019 11:15 AM
To: main@jfw.groups.io
Subject: Re: Jaws no longer reads the Windows 10 emoji panel

Mine works fine, I just now tested it with JAWS 2019. Try pressing down arrow instead of left/right arrow. Up/down travel inside the category.

On 6/18/2019 2:09 PM, ann wrote:
Hi,


With the latest update to Jaws, I can now no longer read the Windows
emoji panel. It apparently does pop up, and I can arrow around and
pres Enter to insert emojis, but Jaws speaks nothing at all now.


Is there a fix for this


~Ann?




moderated Hello JM Can you write me off list? Addison here

O.Addison Gethers
 

Hello JM  Can you write me off list please? My email address is O.AddisonGethers@...

Thank you

Addison


moderated Re: Jaws no longer reads the Windows 10 emoji panel

ann
 

Windows update says my  computer is up to date.So I guess 1903 isn't available for my system yet.

~Ann


On Wed, Jun 19, 2019 at 12:16 PM, Sieghard Weitzel wrote:

Why don’t you upgrade to 1903 and see if that fixes the issue.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of ann
Sent: Tuesday, June 18, 2019 5:06 PM
To: main@jfw.groups.io
Subject: Re: Jaws no longer reads the Windows 10 emoji panel

 

My windows version, according to good old Winver, is:
Version 1803 (OS Build 17134.829).

But after doing a bit of checking, nothing will read the panel anymore, not JFW, NVDA or Narrator. So I guess it's not an exclusive JFW problem.

~Ann

 


moderated Re: Jaws no longer reads the Windows 10 emoji panel

ann
 

For me, Jaws announces nothing but the title of whatever edit window I am working in, but no imojis are spoken.

This behavior only started with the latest JFW updates, which is why I originally thought it was a Jaws problem.

~Ann


On Wed, Jun 19, 2019 at 12:15 PM, Sieghard Weitzel wrote:
Hi Joseph and Ann,

I don't think the issue that Jaws 2019 does not read the emojis, for me it reads them just fine when I arrow around, it only does not announce anything at all when you open the emoji panel. Ann, I would maybe call Jaws support, I am on the Jaws beta list and nobody has reported that Jaws doesn't read the emoji panel, but I did file a bug report about Jaws not saying something like "Emoji panel open" when you press Windows Key + Period or Semi Colon.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Joseph Lee
Sent: Tuesday, June 18, 2019 11:25 AM
To: main@jfw.groups.io
Subject: Re: Jaws no longer reads the Windows 10 emoji panel

Hi,
If it is what I think is happening, then it isn't JAWS at all - it might be Windows 10 Version 1903, and last time I heard from another forum, this problem was reported to Vispero.
Cheers,
Joseph

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Munawar Bijani
Sent: Tuesday, June 18, 2019 11:15 AM
To: main@jfw.groups.io
Subject: Re: Jaws no longer reads the Windows 10 emoji panel

Mine works fine, I just now tested it with JAWS 2019. Try pressing down arrow instead of left/right arrow. Up/down travel inside the category.

On 6/18/2019 2:09 PM, ann wrote:
Hi,


With the latest update to Jaws, I can now no longer read the Windows
emoji panel. It apparently does pop up, and I can arrow around and
pres Enter to insert emojis, but Jaws speaks nothing at all now.


Is there a fix for this


~Ann?




moderated Re: Outlook issue

Zel Iscel
 

Control + Shift + Tab and Shift + F6 both get me into the folder list but won’t allow me to enter any of the folders by pressing space or enter or the right arrow. Is there another command to enter the folder?

 

Control + y works best for me to get to the folders list and enter a folder.

 

BTW I’m still using Jaws 2018 with Windows 1809 (OS Build 17763.557).

 

Cheers

Zel

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, 20 June 2019 12:42 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

 

Shift + F6 also works for me to go back out of Drafts and into the folder list.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 7:50 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

Hi Robin,

 

Thank you so very much, this worked. I appreciate you and your assistance…

 

Rick

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: Wednesday, June 19, 2019 10:40 AM
To: main@jfw.groups.io
Subject: Re: Outlook issue

 

I’m not on Outlook 2019 yet, but offer the following keystroke to try.  Hitting Control Shift I takes you back to your inbox from wherever you are in Outlook.  See if that will work in this situation.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Mladek
Sent: Wednesday, June 19, 2019 8:28 AM
To: main@jfw.groups.io
Subject: Outlook issue

 

Hi all,

 

I’m using Office 2019 and when in Outlook, I can go to my drafts folder control +y and hit the d key until I hear drafts and hit enter. When in the drafts folder, I attempt to repeat to go back to the inbox or any other folder and cannot exit the drafts folder. I have to close Outlook and re-start to get out of the said drafts folder and back into inbox or any other chosen folder.

 

Any suggestions? I’m using Windows 10 with latest update, I’m using Jaws 2019 with latest update and again, Office 2019.

 

Thanks for all suggestions/help to fix this headache,

 

Rick

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

15921 - 15940 of 85877