Date   

moderated Re: Jaws does not read the content of screen using jaws cursor.

Mario
 

thanks Sieghard.

-------- Original Message --------
From: Sieghard Weitzel [mailto:sieghard@live.ca]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Friday, July 5, 2019, 11:01 AM
Subject: Jaws does not read the content of screen using jaws cursor.

You can potentially turn off the accessibility display driver in Jaws
2018, but I am not sure if it would do much good and certainly I don't
think you would have the option to set a keyboard shortcut. The keyboard
shortcut was introduced in Jaws 2019 in the last few months.
Also, you should not turn off the accessibility display driver if you
use Windows 7, not sure why this option is even there, but in Windows 7
the new method for Jaws to obtain information from Windows is of no
concern, it only became necessary in Windows 10 for Vispero to look at a
new way to get this information. This is why you often can't read
anything with the Jaws cursor in Windows 10 where this worked perfectly
fine in Windows 7.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Friday, July 5, 2019 7:30 AM
To: main@jfw.groups.io
Subject: Re: Jaws does not read the content of screen using jaws cursor.

Mike, I'm using JAWS 2018 in Windows 7, and following you're directions,
there is no Toggle Screen Capture entry in the Default keymap.


-------- Original Message --------
From: Orlando Enrique Fiol via Groups.Io
[mailto:ofiol=verizon.net@groups.io]
To: main@jfw.groups.io
Date: Thursday, July 4, 2019, 4:34 PM
Subject: Jaws does not read the content of screen using jaws cursor.

At 02:15 AM 7/3/2019, netbat66 wrote:
>I found where it is with windows 7 but it is not in windows 10
>its in the settings center in miscilanious

Mike B. posted instructions to assign a keystroke to the accessibility
driver. However, using JAWS 2019 on Windows 10 1903, my list of default
keyboard commands does not include anything like "toggle screen capture
method" or "toggle accessibility driver". What might I be missing?

Orlando Enrique Fiol



.


moderated Re: trading on e-trade

mike mcglashon
 

right now to view and option chain I have to go to MarketWatch or Yahoo finance.
Apparently to go get the probabilities of full profit and loss on E*TRADE there’s an option to click her but you only you can only click on it with a mouse.
I haven’t figured out how to view the change themselves on the E*TRADE platform.
However we probably want to go off list with this because now we might be getting into stuff that is in jars anymore.


contact information
Mike McGlashon
PH: 618-783-9331
Email: michael.mcglashon@...


On Jul 5, 2019, at 8:13 AM, Michael Baldwin <mbaldwin577@...> wrote:

I use ETrade for stock and options. No major issues for me. The one thing that bugs the heck out of me is I have to delete the word "symbol" before putting in my ticker to get a quote on. They have also changed some formatting recently so I can no longer press "t" to get to the top of the quote. In Chrome on the order screen for either stock or options, i have to re-enter all the information, but in IE I don't, but it runs a lot slower loading the order screen for some reason.


The options chain can be viewed on a few different pages, how are  you viewing it?

Michael

On 7/2/2019 2:55 PM, mike mcglashon wrote:

Hey guys:

 

Is there anyone on this list who trades stocks and/or options with e-trade using jaws?

 

I currently trade on that platform, and,

I find the stock order sheets good but the options chains don’t seem to read with jaws, meaning,

I cannot hit enter on the options chain, a mouse click seems to only do;

 

Any tricks or tips will be most appreciated.

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 



moderated Re: Jaws does not read the content of screen using jaws cursor.

 

You can potentially turn off the accessibility display driver in Jaws 2018, but I am not sure if it would do much good and certainly I don't think you would have the option to set a keyboard shortcut. The keyboard shortcut was introduced in Jaws 2019 in the last few months.
Also, you should not turn off the accessibility display driver if you use Windows 7, not sure why this option is even there, but in Windows 7 the new method for Jaws to obtain information from Windows is of no concern, it only became necessary in Windows 10 for Vispero to look at a new way to get this information. This is why you often can't read anything with the Jaws cursor in Windows 10 where this worked perfectly fine in Windows 7.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Friday, July 5, 2019 7:30 AM
To: main@jfw.groups.io
Subject: Re: Jaws does not read the content of screen using jaws cursor.

Mike, I'm using JAWS 2018 in Windows 7, and following you're directions, there is no Toggle Screen Capture entry in the Default keymap.


-------- Original Message --------
From: Orlando Enrique Fiol via Groups.Io
[mailto:ofiol=verizon.net@groups.io]
To: main@jfw.groups.io
Date: Thursday, July 4, 2019, 4:34 PM
Subject: Jaws does not read the content of screen using jaws cursor.

At 02:15 AM 7/3/2019, netbat66 wrote:
>I found where it is with windows 7 but it is not in windows 10
>its in the settings center in miscilanious

Mike B. posted instructions to assign a keystroke to the accessibility
driver. However, using JAWS 2019 on Windows 10 1903, my list of default
keyboard commands does not include anything like "toggle screen capture
method" or "toggle accessibility driver". What might I be missing?

Orlando Enrique Fiol



.


moderated Re: trading on e-trade

G. Gray
 

Michael-
 
Well, I too use Google Chrome, but I make my trades and check quotes on the phone.  It is easier and quicker for me, since I am doing other things during the day.  Ask E-trade to code your account for special pricing.  Tell them you have trouble with their site using a screen reader.
 
I just got these this a.m. from Power Options:  I think Allied Financials looks interesting:
 
Buy to open the Akamai Technologies, Inc. (AKAM) Aug. 16th $85 Calls
at $1.75 or lower. After entry, take profits if the stock price hits $87.00 or the option price hits $4.50. Exit if the stock price closes below $78.30.
 
Buy to open the Ally Financial Inc. (ALLY) Sep. 20th $32 Calls
at $1.00 or lower. After entry, take profits if the stock price hits $33.10 or the option price hits $1.90. Exit if the stock price closes below $30.70.
 
Buy to open the JD.com, Inc. (JD) Sep. 20th $33 Calls
at $1.55 or lower. After entry, take profits if the stock price hits $34.70 or the option price hits $3.30. Exit if the stock price closes below $29.90.
 
Buy to open the Box, Inc. (BOX) Sep. 20th $16 Puts
at $0.60 or lower. After entry, take profits if the stock price hits $15.80 or the option price hits $1.30. Exit if the stock price closes above $18.50.
 
Buy to open the Greif, Inc. (GEF) Oct. 18th $30 Puts
at $1.00 or lower. After entry, take profits if the stock price hits $31.00 or the option price hits $1.90. Exit if the stock price closes above $35.80.
 
Regards,
 
George
 

Sent: Friday, July 05, 2019 8:13 AM
Subject: Re: trading on e-trade
 

I use ETrade for stock and options. No major issues for me. The one thing that bugs the heck out of me is I have to delete the word "symbol" before putting in my ticker to get a quote on. They have also changed some formatting recently so I can no longer press "t" to get to the top of the quote. In Chrome on the order screen for either stock or options, i have to re-enter all the information, but in IE I don't, but it runs a lot slower loading the order screen for some reason.

 

The options chain can be viewed on a few different pages, how are  you viewing it?

Michael

On 7/2/2019 2:55 PM, mike mcglashon wrote:

Hey guys:

 

Is there anyone on this list who trades stocks and/or options with e-trade using jaws?

 

I currently trade on that platform, and,

I find the stock order sheets good but the options chains don’t seem to read with jaws, meaning,

I cannot hit enter on the options chain, a mouse click seems to only do;

 

Any tricks or tips will be most appreciated.

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 



Virus-free. www.avast.com


moderated Re: Jaws does not read the content of screen using jaws cursor.

Mario
 

Mike, I'm using JAWS 2018 in Windows 7, and following you're directions,
there is no Toggle Screen Capture entry in the Default keymap.

-------- Original Message --------
From: Orlando Enrique Fiol via Groups.Io
[mailto:ofiol=verizon.net@groups.io]
To: main@jfw.groups.io
Date: Thursday, July 4, 2019, 4:34 PM
Subject: Jaws does not read the content of screen using jaws cursor.

At 02:15 AM 7/3/2019, netbat66 wrote:
>I found where it is with windows 7 but it is not in windows 10
>its in the settings center in miscilanious

Mike B. posted instructions to assign a keystroke to the accessibility
driver. However, using JAWS 2019 on Windows 10 1903, my list of default
keyboard commands does not include anything like "toggle screen capture
method" or "toggle accessibility driver". What might I be missing?

Orlando Enrique Fiol



.


moderated Re: trading on e-trade

Michael Baldwin
 

I use ETrade for stock and options. No major issues for me. The one thing that bugs the heck out of me is I have to delete the word "symbol" before putting in my ticker to get a quote on. They have also changed some formatting recently so I can no longer press "t" to get to the top of the quote. In Chrome on the order screen for either stock or options, i have to re-enter all the information, but in IE I don't, but it runs a lot slower loading the order screen for some reason.


The options chain can be viewed on a few different pages, how are  you viewing it?

Michael

On 7/2/2019 2:55 PM, mike mcglashon wrote:

Hey guys:

 

Is there anyone on this list who trades stocks and/or options with e-trade using jaws?

 

I currently trade on that platform, and,

I find the stock order sheets good but the options chains don’t seem to read with jaws, meaning,

I cannot hit enter on the options chain, a mouse click seems to only do;

 

Any tricks or tips will be most appreciated.

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 



moderated please reply in group

MohammadAfzal
 

Hi All,

I am requesting you that, If you gave any answer of question or solution of any query . Please share in the group .

With regards.

Mohammad Afzal Khan


--
Mohammad Afzal Khan.
Mobile :91 - 9718806099
Skype : counsellor.afzal
Impossible is the means of I M Possible


moderated Re: Jaws does not read the content of screen using jaws cursor.

 

Maybe somebody can correct me, but I believe if you delete or rename the default.jkm file and then turn Jaws off and back on or restart the computer a new Default.jkm file is created.
I had one computer where the ToggleScreenCapture also did not show up and I think that is what I had to do, but that was I think 3 or 4 months ago and I can't remember exactly.
I would simply rename the default.jkm or copy it to a different location and then try it, should a new default.jkm file not appear you can put it back.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Orlando Enrique Fiol via Groups.Io
Sent: Thursday, July 4, 2019 1:34 PM
To: main@jfw.groups.io
Subject: Re: Jaws does not read the content of screen using jaws cursor.

At 02:15 AM 7/3/2019, netbat66 wrote:
>I found where it is with windows 7 but it is not in windows 10 >its in the settings center in miscilanious

Mike B. posted instructions to assign a keystroke to the accessibility driver. However, using JAWS 2019 on Windows 10 1903, my list of default keyboard commands does not include anything like "toggle screen capture method" or "toggle accessibility driver". What might I be missing?

Orlando Enrique Fiol


moderated Re: Jaws does not read the content of screen using jaws cursor.

 

You can still do it by going to Jaws Settings Centre > Default Settings > Miscellaneous and then find Use Accessibility Display Driver and turn it on or off there.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Orlando Enrique Fiol via Groups.Io
Sent: Thursday, July 4, 2019 1:41 PM
To: main@jfw.groups.io
Subject: Re: Jaws does not read the content of screen using jaws cursor.

At 03:39 PM 7/3/2019, David Goldfield wrote:
>this would give users who need to disable and >enable the driver the option of going into Keyboard Manager and >assigning a key of their choosing as a toggle.
>
I would love to experiment with toggling this driver on and off in difficult applications, but my hotkey list shows no entries related too accessibility driver or screen capture.

Orlando Enrique Fiol
Ph.D. in Music Theory
University of Pennsylvania: November, 2018 Professional Pianist/Keyboardist, Percussionist, Arranger, Performer and Pedagogue
Home: (980) 585-1516
Mobile: (267) 971-7090
Email: ofiol@verizon.net


moderated Re: Jaws does not read the content of screen using jaws cursor.

Orlando Enrique Fiol
 

At 05:25 PM 7/3/2019, Sieghard Weitzel wrote:
I pushed quite hard for a layered shortcut key, but instead
they made it optional for a shortcut to be created in keyboard
manager. The script is called ToggleScreenCapture and of course you
need to have the default keyboard manager loaded..
Using JAWS 2019 and Windows 10 1903, I have the default keyboard manager loaded, but still cannot find "ToggleScreeenCaptture" in the commands list.


Orlando Enrique Fiol
Ph.D. in Music Theory
University of Pennsylvania: November, 2018
Professional Pianist/Keyboardist, Percussionist, Arranger, Performer and Pedagogue
Home: (980) 585-1516
Mobile: (267) 971-7090
Email: ofiol@verizon.net


moderated Re: Jaws does not read the content of screen using jaws cursor.

Orlando Enrique Fiol
 

At 03:39 PM 7/3/2019, David Goldfield wrote:
this would give users who need to disable and
enable the driver the option of going into Keyboard Manager and
assigning a key of their choosing as a toggle.
I would love to experiment with toggling this driver on and off in difficult applications, but my hotkey list shows no entries related too accessibility driver or screen capture.

Orlando Enrique Fiol
Ph.D. in Music Theory
University of Pennsylvania: November, 2018
Professional Pianist/Keyboardist, Percussionist, Arranger, Performer and Pedagogue
Home: (980) 585-1516
Mobile: (267) 971-7090
Email: ofiol@verizon.net


moderated Re: Jaws does not read the content of screen using jaws cursor.

Orlando Enrique Fiol
 

At 02:15 AM 7/3/2019, netbat66 wrote:
I found where it is with windows 7 but it is not in windows 10
its in the settings center in miscilanious
Mike B. posted instructions to assign a keystroke to the accessibility driver. However, using JAWS 2019 on Windows 10 1903, my list of default keyboard commands does not include anything like "toggle screen capture method" or "toggle accessibility driver". What might I be missing?

Orlando Enrique Fiol


moderated Re: Help with Excel.

Mario
 

BEP or Business Enterprising Program.

-------- Original Message --------
From: Brian Vogel [mailto:britechguy@gmail.com]
To: main@jfw.groups.io
Date: Thursday, July 4, 2019, 2:15 PM
Subject: Help with Excel.

On Thu, Jul 4, 2019 at 01:38 PM, Liz and Hope wrote:


BEP training

If I may ask, what does BEP stand for?

And, while not a podcast, the search results from,
https://duckduckgo.com/?q=Excel+screen+reader , include a lot of
information about using Excel with a Screen Reader, including some
material on YouTube.  This is one of those areas where a lot has been
generated.  I'd say that MS-Word, MS-Excel, and MS-Outlook have all
gotten "the royal treatment" when it comes to availability of material
on using them with a screen reader.

--

Brian *-* Windows 10 Pro, 64-Bit, Version 1809, Build 17763

Many of the insights of the saint stem from his experience as a sinner.

~ Eric Hoffer


moderated Re: Help with Excel.

Milton Ota <mota1252@...>
 

B E P stands for Business Enterprise Program.


Original message:

On Thu, Jul 4, 2019 at 01:38 PM, Liz and Hope wrote:

BEP training
If I may ask, what does BEP stand for?
And, while not a podcast, the search results from, https://duckduckgo.com/?q=Excel+screen+reader <https://duckduckgo.com/?q=Excel+screen+reader>;, include a lot of information about using Excel with a Screen Reader, including some material on YouTube. This is one of those areas where a lot has been generated. I'd say that MS-Word, MS-Excel, and MS-Outlook have all gotten "the royal treatment" when it comes to availability of material on using them with a screen reader.
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763

Many of the insights of the saint stem from his experience as a sinner.
~ Eric Hoffer


moderated Re: Help with Excel.

Ann Byrne
 

there was a recent webinar on the topic.
Go to JAWS,
help,
resources
free webinars.

At 12:38 PM 7/4/2019, you wrote:
Hello! In the very near future, I will be receiving a laptop with Jaws 19 and microsoft Office. I will be using Excel for the BEP training that I am about to receive. Is there a good podcast about Jaws and Excel?
Liz Ulrich and leader Dog hope
HTTP://WWW.FACEBOOK.COM/ELIZABETH.ULRICH.1


moderated Re: Help with Excel.

 

On Thu, Jul 4, 2019 at 01:38 PM, Liz and Hope wrote:
BEP training
If I may ask, what does BEP stand for?

And, while not a podcast, the search results from, https://duckduckgo.com/?q=Excel+screen+reader, include a lot of information about using Excel with a Screen Reader, including some material on YouTube.  This is one of those areas where a lot has been generated.  I'd say that MS-Word, MS-Excel, and MS-Outlook have all gotten "the royal treatment" when it comes to availability of material on using them with a screen reader.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer


moderated Help with Excel.

Liz and Hope
 

Hello! In the very near future, I will be receiving a laptop with Jaws 19 and microsoft Office. I will be using Excel for the BEP training that I am about to receive. Is there a good podcast about Jaws and Excel?
Liz Ulrich and leader Dog hope
HTTP://WWW.FACEBOOK.COM/ELIZABETH.ULRICH.1


moderated Re: How to use external hard drive

 

https://duckduckgo.com/?q=how+to+use+File+History+Windows+10
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer


moderated Re: How to use external hard drive

Sharon
 

Wow, what is file history? Doing a backup from that?

Sharon

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Thursday, July 4, 2019 12:08 PM
To: main@jfw.groups.io
Subject: Re: How to use external hard drive

 

On Thu, Jul 4, 2019 at 10:42 AM, Laura Richardson wrote:

I have a new external hard drive that I would like to put some folders and files on.  I’ve never used an external hard drive and have no clue what to do to accomplish this once I’ve plugged it into my computer.

You've already received great advice so far.  There's no real difference, from the end-user on the computer perspective, between an external HDD, SSD, or thumb drive.  All will just show up in File Explorer as another drive on the system.

I do have several suggestions, the first of which is to think about assigning a drive letter of your own choosing for an external HDD using Disk Management (which you can find via a search on "partitions" and will show up as the top result as "Create and format hard disk partitions."   In this case you won't be doing either of the two things mentioned in the title.   The reason I suggest this, and that I do it for myself, is that it makes it much easier to know that when you see something like drive V showing up in your File Explorer that you know exactly which drive you're dealing with.  There are times when automatic drive letter assignment can get confusing as devices are inserted and removed.

Second, since you're a Windows 10 user, if you are not using File History to keep a backup of your precious user data I suggest you do so.

Third, if you don't currently have a full system image backup protocol in place, where you run said backup on a monthly basis, nuking the old backups immediately after the latest is taken (or at least all but the two most recent) consider doing that, too.

 
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer


moderated Re: How to use external hard drive

 

On Thu, Jul 4, 2019 at 10:42 AM, Laura Richardson wrote:
I have a new external hard drive that I would like to put some folders and files on.  I’ve never used an external hard drive and have no clue what to do to accomplish this once I’ve plugged it into my computer.
You've already received great advice so far.  There's no real difference, from the end-user on the computer perspective, between an external HDD, SSD, or thumb drive.  All will just show up in File Explorer as another drive on the system.

I do have several suggestions, the first of which is to think about assigning a drive letter of your own choosing for an external HDD using Disk Management (which you can find via a search on "partitions" and will show up as the top result as "Create and format hard disk partitions."   In this case you won't be doing either of the two things mentioned in the title.   The reason I suggest this, and that I do it for myself, is that it makes it much easier to know that when you see something like drive V showing up in your File Explorer that you know exactly which drive you're dealing with.  There are times when automatic drive letter assignment can get confusing as devices are inserted and removed.

Second, since you're a Windows 10 user, if you are not using File History to keep a backup of your precious user data I suggest you do so.

Third, if you don't currently have a full system image backup protocol in place, where you run said backup on a monthly basis, nuking the old backups immediately after the latest is taken (or at least all but the two most recent) consider doing that, too.

 
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer

15481 - 15500 of 85836