Date   
Re: installing Malware Bites

Mike B. <mike9902@...>
 


Hi Shirley,
 
Yes, MWB is accessible especially with Jaws versions later than J16.  Below is a brief tutorial for navigating MWB.
Whenever you open MWB you will hear Jaws report various Tabs as you Tab through the interface.  The tabs are Dashboard, Scan, Quarantine, Reports, & Settings 
If you press the spacebar on any one of the tabs this selects this tab and now you have to tab many times to get to this tabs options.
 
Let's take the Scan tab for instance.  If you check this tab., and tab several times you will come to its options for this selection.  Scan Type & Scan
Schedule are its 2 options.  Press the spacebar on which option, then tab to review your choices for the selected option.  When you are through tabbing
through that tabs options you will wratp around to the beginning of the innerface.  Check another tab, and you start all over again tabbing to options
for the selected tab.  This is why I said earlier that the latest MWB is accessible, but requires tabbing like hell to review all the Tabs, options, &
selections.
 
Your question about selecting Quarantined items is tough to answer because I haven't figured out a reliable & consistent way of doing this, so I use a
combination of OCR, Jaws cursor, & Touch cursor gymnastics, or get someone sighted to select them all & remove!  LOL  LOL 
 
Here's an example I'll use on finding the scan options:
Open MWB and tab to, Scan Tab, press the spacebar to check it.
Tab to, Scan Types, and this should be checked, press the spacebar to check it if it isn't.
Tab to, Threat Scan, and this should be checked by default.  When you tab to this , Jaws should report some information about this scan.  Tab 1 time, this
the Custom scan option, again Jaws should read some info about selecting this scan.  Tab 1 time, and this is the Hyper scan, and again Jaws should read
information about this scan when you tab to it.  If you want to select either the, Custom, or Hyper, scans press the spacebar to select the scan, but the
Threat scan, is probably your best choice and only takes a few minutes to run.
Tab 1 more time to the, Start Scan, button and press the spacebar to start.
 
If you ran a scan you would select the Reports tab and tab to the table of scans that you would choose from to review its results.  If you want quarantined
items, select the, Quarantine tab....
 
It is really hard to describe this latest version of MWB, and the way I learned was to wear out my tab key, and pay close attention to various buttons,
comboboxes, and whatever you will come across by selecting the diferent tabs, then reviewing the options of them.
 
I hope this helps, and I know I probably confused the hell out of you, but the best way to get acclamated with is to spen some time with it, paying close
attention to what Jaws reports.
Take care.  Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of spending a lot of time trying to remember what it was, I spend the time looking for where I saved it!

----- Original Message -----
Sent: Tuesday, December 18, 2018 7:30 AM
Subject: Re: installing Malware Bites

I should go on to explain here that I’m using Windows 10 and JAWS 2018. Is MB compatible—JAWS friendly? If not, I’ll just forget installing it altogether.

 

Thanks for any help.   

 

Shirley Tracy

 

From: Mike B.
Sent: Monday, December 17, 2018 10:21 PM
To: main@jfw.groups.io
Subject: Re: installing Malware Bites

 

Hi Shirley,

 

Are you installing the free version or, do you have ID & Key Codes?

Take care.  Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of spending a lot of time trying to remember what it was, I spend the time looking for where I saved it!

----- Original Message -----

Sent: Monday, December 17, 2018 7:04 PM

Subject: installing Malware Bites

 

Hi listers,

 

I’m trying to install MB, but I admit I don’t know what I’m doing. It seemed easy enough at first, but (forgive my ignorance here) I don’t understand why I was asked to agree to Groupbox. Is this important for Malware Bites, or just some extra thing they are trying to get me to agree to. I have no sighted assistance here, and maybe I’m missing something since I don’t see the screen. Any advice is appreciated.

 

 

Shirley Tracy

 

 

Re: excel 2010 and vallidation lists

Van Lant, Robin
 

I have not used this feature before, but have occasionally had issues with dropdowns in Excel.  As you arrow down the list, try using Insert up arrow or Insert tab to see if JAWS will read the menu option you are on.   

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of William Windels
Sent: Tuesday, December 18, 2018 3:10 AM
To: jfw@groups.io
Subject: excel 2010 and vallidation lists

 

Hello,

In microsoft excel 2010, I use drop down list with vallidation.

So, I should do alt+down-arrow to open the list, select the predefined value with the arrow-keys and then close the list with alt+up-arrow.

 

It happends very often that jaws is showing nothing while scrolling the dropdown-list but when doing 3 times down-arrow, and then close the dropdown-list, the tird option is selected.

My conclusion is that ms excel is working well but jaws is not showing.

I can’t fiond out allo what’s the problem.

I have jaws18 and jaws2018 and both have the problem.

The excel-window is maximised.

 

Any ideas what I could test or what can be the problem?

  

Kind regards,

William

 

Met vriendelijke groeten

William Windels

 

Incident Manager SWO

02/506 0 487 (niet bereikbaar op maandag en vrijdag)

 



This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114


If you prefer not to receive future e-mail offers for products or services from Key
send an e-mail to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

Re: installing scripts for Goldwave

Mario
 

I spoke too soon, drat! I tried it again, just to make sure it was
working. it's not. this problem is driving me nutso, making my hair
grayer. what little I have left. lol.

wish I had Jim Bowers email so I could ask him about my problem. as I
understand, he is the original author of the scripts, not Jim Grimsby.

-------- Original Message --------
From: Mario [mailto:mrb620@...]
Sent: Tue, Dec 18, 2018 3:21 PM EST
To: main@jfw.groups.io
Subject: installing scripts for Goldwave

hi Richard, when I copied the scripts to the location that you
specified, ran GW, opened an audio file and tried to select an effect
preset, JAWS would not speak as I arrowed down. closing all windows, I
removed the Goldwave4 scripts, tried GW again, and could now arrow to
the preset.

were you using Windows 10 or 7? I think there may be some very subtle
differences depending on which OS is running.


-------- Original Message --------
From: Richard Turner [mailto:richardturner42@...]
Sent: Tue, Dec 18, 2018 3:00 PM EST
To: main@jfw.groups.io
Subject: installing scripts for Goldwave


My scripts for Goldwave are in:
c Program Data, Freedom Scientific, Jaws, 2018, scripts, enu
I have both goldwave and doldwave4 script files in there. When I press
insert-q I hear Goldwave version 5,6 settings.


I hear the numbers change as I arrow up or down, for example on the
low/high pass settings.


Richard



"It is a great thing to start life with a small number of really good
books which are your very own." __ Sir Arthur Conan Doyle

On Dec 18, 2018, at 9:37 AM, Mario <mrb620@...> wrote:

when I use Goldwave, I am experiencing a problem where JAWS does not
read the presets as I arrow down or up and some dialogs where a number
can be changed by arrowing up or down.

right now, the scripts reside in the user settings/ENU folder:
"C:\Users\Mario\AppData\Roaming\Freedom Scientific\JAWS\2018\Settings\enu"

but I think for JAWS 2018 or later, the scripts need to reside
somewhere else. if so, where do they go and are all of the scripts,
Goldwave and Goldwave4 files, copied?







.

Re: installing scripts for Goldwave

Mario
 

hi Richard, when I copied the scripts to the location that you
specified, ran GW, opened an audio file and tried to select an effect
preset, JAWS would not speak as I arrowed down. closing all windows, I
removed the Goldwave4 scripts, tried GW again, and could now arrow to
the preset.

were you using Windows 10 or 7? I think there may be some very subtle
differences depending on which OS is running.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@...]
Sent: Tue, Dec 18, 2018 3:00 PM EST
To: main@jfw.groups.io
Subject: installing scripts for Goldwave


My scripts for Goldwave are in:
c Program Data, Freedom Scientific, Jaws, 2018, scripts, enu
I have both goldwave and doldwave4 script files in there. When I press
insert-q I hear Goldwave version 5,6 settings.


I hear the numbers change as I arrow up or down, for example on the
low/high pass settings.


Richard



"It is a great thing to start life with a small number of really good
books which are your very own." __ Sir Arthur Conan Doyle

On Dec 18, 2018, at 9:37 AM, Mario <mrb620@...> wrote:

when I use Goldwave, I am experiencing a problem where JAWS does not
read the presets as I arrow down or up and some dialogs where a number
can be changed by arrowing up or down.

right now, the scripts reside in the user settings/ENU folder:
"C:\Users\Mario\AppData\Roaming\Freedom Scientific\JAWS\2018\Settings\enu"

but I think for JAWS 2018 or later, the scripts need to reside
somewhere else. if so, where do they go and are all of the scripts,
Goldwave and Goldwave4 files, copied?







.

Re: installing scripts for Goldwave

Richard Turner
 

My scripts for Goldwave are in:
c Program Data, Freedom Scientific, Jaws, 2018, scripts, enu
I have both goldwave and doldwave4 script files in there. When I press insert-q I hear Goldwave version 5,6 settings.


I hear the numbers change as I arrow up or down, for example on the low/high pass settings.


Richard



"It is a great thing to start life with a small number of really good books which are your very own." __ Sir Arthur Conan Doyle

On Dec 18, 2018, at 9:37 AM, Mario <mrb620@...> wrote:

when I use Goldwave, I am experiencing a problem where JAWS does not
read the presets as I arrow down or up and some dialogs where a number
can be changed by arrowing up or down.

right now, the scripts reside in the user settings/ENU folder:
"C:\Users\Mario\AppData\Roaming\Freedom Scientific\JAWS\2018\Settings\enu"

but I think for JAWS 2018 or later, the scripts need to reside
somewhere else. if so, where do they go and are all of the scripts,
Goldwave and Goldwave4 files, copied?



atachments in thunderbird not showing

dennis
 

i'm using jaws 2019 and latest version of thunderbird. when i try to look at a list of atachments it says how many are there but i can't read the names of them. anyone else having this problem?


Virus-free. www.avast.com

Re: Hp Pavillion function keys

John Martyn
 

Hi, yes you will need to enter into the BIOS which is the firmware on the system. It does not have accessibility to the BIOS. You can as an alternate way to read the Bialas be able to use your phone to capture anything that is optical character recognition using the Google a I app which reads on screen text. That will give you the capability to enter into keyboard functionality. Usually the F1 through F 12 keys are short cuts, but changing that function capability in the BIOS will put them back to standard mode. You will need a separate device such as an iPhone or an android with capability to read the screen in that mode since there is no yours or accessibility to it. Hope this helps, John

On Mon, Dec 17, 2018 at 11:33 AM Stan Bobbitt <stan.bobbitt@...> wrote:
Hi,
   I have an HP pavilion laptop from 2012. It's the I7. I didn't have to change the function keys or anything. I'm pretty sure yours is old enough so That you  won’t have to either.
HTH,
Stan B
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kelsey Nicolay
Sent: Sunday, December 16, 2018 10:13 AM
To: jfw@groups.io
Subject: Hp Pavillion function keys


Hello,
I’m not sure if this is the right list, but I was hoping someone might know the answer to this. My parents have offered me their Hp Pavillion with i7 processor that they no longer use. In return, I have to give them my old laptop. The laptop I will be getting is from 2011. Does anyone know whether I will have to change the function keys in the BIOS or if that unit is old enough that I won’t have to? My Hp is from 2009 and I didn’t have to make this change. I tried to call Hp’s accessibility line to see if they can answer my question, but they don’t answer their phone. I guess I could try sales chat to see if they might know.
Kind Regards,
Kelsey Nicolay






Re: installing Malware Bites

John Martyn
 

Hi, you can obviously use optical character recognition OCR with insert space followed by the letters ON then S. Another tactic is to use the built in windows 10 near raider feature which has better access to you I capability which is the user interface. Typically as it stands now, the jaws cursor is pretty useless at this point. It does not recognize the letters or components on the screen. Those windows are designed with strange you I components. Typically it’s a participation window that just says to enhance any experience, and it is good sometimes to participate; however, what you should do is just double check the screen text with OCR. Once OCR is complete on the screen, then use insert are to change restriction to the application to read specifics on the screen. Hope this helps, John PS insert are for restriction changes it to application mode. You can then hit the ski repeatedly to focus in on other areas of what you are trying to read. Cheers!

On Tue, Dec 18, 2018 at 8:30 AM Shirley Tracy <shirleytracy16@...> wrote:

I should go on to explain here that I’m using Windows 10 and JAWS 2018. Is MB compatible—JAWS friendly? If not, I’ll just forget installing it altogether.

 

Thanks for any help.   

 

Shirley Tracy

 

From: Mike B.
Sent: Monday, December 17, 2018 10:21 PM
To: main@jfw.groups.io
Subject: Re: installing Malware Bites

 

Hi Shirley,

 

Are you installing the free version or, do you have ID & Key Codes?

Take care.  Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of spending a lot of time trying to remember what it was, I spend the time looking for where I saved it!

----- Original Message -----

Sent: Monday, December 17, 2018 7:04 PM

Subject: installing Malware Bites

 

Hi listers,

 

I’m trying to install MB, but I admit I don’t know what I’m doing. It seemed easy enough at first, but (forgive my ignorance here) I don’t understand why I was asked to agree to Groupbox. Is this important for Malware Bites, or just some extra thing they are trying to get me to agree to. I have no sighted assistance here, and maybe I’m missing something since I don’t see the screen. Any advice is appreciated.

 

 

Shirley Tracy

 

 

Re: Web site shortcut

 

How one creates a desktop shortcut to open in a specific browser varies from browser to browser.

All of the following presume that you are in the browser you wish to have open the shortcut when it's triggered from the desktop, and that you are currently viewing the webpage for which you want the shortcut.

Chrome:
       1. Hit ALT, Down Arrow, L, then use Down Arrow to get to the Create Shortcut menu entry.  [This sequence throws focus to the Chrome Menu button, expands the menu, makes the choice of the "More Tools" menu item, then you're down arrowing though those more tools.  Unfortunately Create Shortcut has no shortcut letter.]
       2.  Once you're on Create Shortcut hit Enter.  You're done.

Firefox:
        1. These instructions are so you can avoid having to use drag and drop, which is the preferred "Firefox method" and so you get the shortcut to always open using Firefox.
        2.  Copy the URL of the webpage you're viewing from the address bar.
        3.  Hit WinKey+D to throw focus on the desktop.  Using this method focus should be on the desktop itself, not an item on it.
        4.  Hit your applications/menu key OR SHIFT+F10, W, S  [Desktop Context Menu, New Item, Shortcut].  This will start the create Shortcut Wizard.
NOTE:  If you don't care whether the shortcut opens in Firefox versus your default browser, if it's not Firefox, follow steps 5 and 6.  If it must be opened in Firefox then proceed to step 7 instead.
        5.  Paste the URL you copied in to the Type the location of the item edit box, then hit the Next button.
        6.  Type whatever you want this shortcut name to be in the Type a name for this shortcut edit box, then hit the Finish button.  You're done.
        7.  In the Type the location of the item edit box, enter the following, in order:
                     a) "C:\Program Files\Mozilla Firefox\firefox.exe"  (include the quotes and follow this by a single space)
                     b) If you want Firefox to open that URL in a new tab, then enter -new-tab, if a new window, then enter -new-window.  Follow either with a space.
                     c) Paste in the URL of the webpage you want opened in Firefox.
        8.  Hit the Next button, which will bring up the naming dialog.  
        9.  Type whatever you want this shortcut name to be in the Type a name for this shortcut edit box, then hit the Finish button.  You're done.

Unless you specify the browser to be used when creating a URL shortcut, the browser used will be whatever you have set as your default browser.  Chrome makes it quite a bit easier to create a "forced use Chrome" shortcut than Firefox does.
        
I refuse to even discuss IE, which Microsoft is abandoning, or Edge, which is also in the same boat.
           
--

Brian - Windows 10 Home, 64-Bit, Version 1809, Build 17763  

   Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

         ~ H.L. Mencken, AKA The Sage of Baltimore

installing scripts for Goldwave

Mario
 

when I use Goldwave, I am experiencing a problem where JAWS does not
read the presets as I arrow down or up and some dialogs where a number
can be changed by arrowing up or down.

right now, the scripts reside in the user settings/ENU folder:
"C:\Users\Mario\AppData\Roaming\Freedom Scientific\JAWS\2018\Settings\enu"

but I think for JAWS 2018 or later, the scripts need to reside
somewhere else. if so, where do they go and are all of the scripts,
Goldwave and Goldwave4 files, copied?

Re: Jaws loading

Dan Longmore
 

Not sure how to turn this off in Windows 7.  But in Windows 10 you can change these under Settings. Go to the Personalization tab.  Change your settings under the “Lock Screen : or “Start” tab to keep the start up as clean as possible and this is where you can change the slide show settings. 

 

Dan  

               

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of dennis
Sent: Tuesday, December 18, 2018 12:08 PM
To: main@jfw.groups.io
Subject: Re: Jaws loading

 

i have this problem on a win7 laptop.

On 12/18/2018 11:05 AM, DJ wrote:

 I was hoping that jaws 2019 with start faster on my windows 10 PC also. That hasn’t really been the case. But I did discover though, is that the windows 10 keeps putting a slideshow or picture selection up on the screen. There is a way to click around it, but with no vision, it’s almost impossible.  I think my testimony might be completely opposite from what is now, if I could just figure out how to get that slideshow to stop coming up every time I turn my computer on. Any suggestions?

 

 

 

On Mon, Dec 17, 2018 at 3:51 AM Hicks Steven (CORNWALL IT SERVICES) via Groups.Io <steven.hicks=nhs.net@groups.io> wrote:

My 2019 is much faster to load at startup!
It could be something else that is delaying your profile loading and not JAWS at all.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Don H
Sent: 13 December 2018 16:39
To: main@jfw.groups.io
Subject: Jaws loading

One of the benefits of Jaws 2019 was supposed to be faster startup.  I
don't see any real difference but do see after Jaws loading speech is
choppy for a short while before working well.  Anyone else seeing this?






********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail



 

Virus-free. www.avast.com

Re: Jaws loading

dennis
 

i have this problem on a win7 laptop.

On 12/18/2018 11:05 AM, DJ wrote:
 I was hoping that jaws 2019 with start faster on my windows 10 PC also. That hasn’t really been the case. But I did discover though, is that the windows 10 keeps putting a slideshow or picture selection up on the screen. There is a way to click around it, but with no vision, it’s almost impossible.  I think my testimony might be completely opposite from what is now, if I could just figure out how to get that slideshow to stop coming up every time I turn my computer on. Any suggestions?



On Mon, Dec 17, 2018 at 3:51 AM Hicks Steven (CORNWALL IT SERVICES) via Groups.Io <steven.hicks=nhs.net@groups.io> wrote:
My 2019 is much faster to load at startup!
It could be something else that is delaying your profile loading and not JAWS at all.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Don H
Sent: 13 December 2018 16:39
To: main@jfw.groups.io
Subject: Jaws loading

One of the benefits of Jaws 2019 was supposed to be faster startup.  I
don't see any real difference but do see after Jaws loading speech is
choppy for a short while before working well.  Anyone else seeing this?






********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail





Virus-free. www.avast.com

atachments not reading in thunderbird

dennis
 

anyone having this issue? using jaws 2019 and latest version of thunderbird. the atachments list says how many there are but you can't read them.


Virus-free. www.avast.com

Re: Jaws loading

DJ
 

 I was hoping that jaws 2019 with start faster on my windows 10 PC also. That hasn’t really been the case. But I did discover though, is that the windows 10 keeps putting a slideshow or picture selection up on the screen. There is a way to click around it, but with no vision, it’s almost impossible.  I think my testimony might be completely opposite from what is now, if I could just figure out how to get that slideshow to stop coming up every time I turn my computer on. Any suggestions?



On Mon, Dec 17, 2018 at 3:51 AM Hicks Steven (CORNWALL IT SERVICES) via Groups.Io <steven.hicks=nhs.net@groups.io> wrote:
My 2019 is much faster to load at startup!
It could be something else that is delaying your profile loading and not JAWS at all.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Don H
Sent: 13 December 2018 16:39
To: main@jfw.groups.io
Subject: Jaws loading

One of the benefits of Jaws 2019 was supposed to be faster startup.  I
don't see any real difference but do see after Jaws loading speech is
choppy for a short while before working well.  Anyone else seeing this?






********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail




Re: Web site shortcut

Bill White
 

These instructions don't work with Firefox, Mario.

Bill White

billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Tuesday, December 18, 2018 7:24 AM
To: main@jfw.groups.io
Subject: Re: Web site shortcut

actually, the instructions apply to which ever browser is set as the
default browser.


-------- Original Message --------
From: Sieghard Weitzel [mailto:@Sieghard]
Sent: Tue, Dec 18, 2018 10:16 AM EST
To: main@jfw.groups.io
Subject: Web site shortcut

Those instructions are for IE, you don't say which browser you use.

*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Gerald Levy
*Sent:* Monday, December 17, 2018 10:17 AM
*To:* main@jfw.groups.io
*Subject:* Re: Web site shortcut

Go to the web site you want to save on your desktop, then launch file
menu, scroll up to send submenu and select shortcut to desktop.

Gerald

12/17/2018 1:04 PM, T. Civitello wrote:

Could someone please refresh my memory? I want to put a shortcut to
a Web site on the desktop. I have done it in the past but I don’t
remember how. Thanks, Tom

Re: Web site shortcut

T. Civitello
 

IE is good. Tom
 

Sent: Tuesday, December 18, 2018 7:16 AM
Subject: Re: Web site shortcut
 

Those instructions are for IE, you don't say which browser you use.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Gerald Levy
Sent: Monday, December 17, 2018 10:17 AM
To: main@jfw.groups.io
Subject: Re: Web site shortcut

 

 

Go to the web site you want to save on your desktop, then launch file menu, scroll up to send submenu and select shortcut to desktop.

 

Gerald

 

 

12/17/2018 1:04 PM, T. Civitello wrote:

Could someone please refresh my memory? I want to put a shortcut to a Web site on the desktop. I have done it in the past but I don’t remember how.  Thanks, Tom

Re: installing Malware Bites

Shirley Tracy
 

I should go on to explain here that I’m using Windows 10 and JAWS 2018. Is MB compatible—JAWS friendly? If not, I’ll just forget installing it altogether.

 

Thanks for any help.   

 

Shirley Tracy

 

From: Mike B.
Sent: Monday, December 17, 2018 10:21 PM
To: main@jfw.groups.io
Subject: Re: installing Malware Bites

 

Hi Shirley,

 

Are you installing the free version or, do you have ID & Key Codes?

Take care.  Go Rams!
Sent from my iBarstool.
I type out everything I want to remember. That way instead of spending a lot of time trying to remember what it was, I spend the time looking for where I saved it!

----- Original Message -----

Sent: Monday, December 17, 2018 7:04 PM

Subject: installing Malware Bites

 

Hi listers,

 

I’m trying to install MB, but I admit I don’t know what I’m doing. It seemed easy enough at first, but (forgive my ignorance here) I don’t understand why I was asked to agree to Groupbox. Is this important for Malware Bites, or just some extra thing they are trying to get me to agree to. I have no sighted assistance here, and maybe I’m missing something since I don’t see the screen. Any advice is appreciated.

 

 

Shirley Tracy

 

 

Re: Web site shortcut

Mario
 

actually, the instructions apply to which ever browser is set as the
default browser.

-------- Original Message --------
From: Sieghard Weitzel [mailto:@Sieghard]
Sent: Tue, Dec 18, 2018 10:16 AM EST
To: main@jfw.groups.io
Subject: Web site shortcut

Those instructions are for IE, you don't say which browser you use.

*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Gerald Levy
*Sent:* Monday, December 17, 2018 10:17 AM
*To:* main@jfw.groups.io
*Subject:* Re: Web site shortcut

Go to the web site you want to save on your desktop, then launch file
menu, scroll up to send submenu and select shortcut to desktop.

Gerald

 12/17/2018 1:04 PM, T. Civitello wrote:

Could someone please refresh my memory? I want to put a shortcut to
a Web site on the desktop. I have done it in the past but I don’t
remember how.  Thanks, Tom

Re: Web site shortcut

 

Those instructions are for IE, you don't say which browser you use.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Gerald Levy
Sent: Monday, December 17, 2018 10:17 AM
To: main@jfw.groups.io
Subject: Re: Web site shortcut

 

 

Go to the web site you want to save on your desktop, then launch file menu, scroll up to send submenu and select shortcut to desktop.

 

Gerald

 

 

 12/17/2018 1:04 PM, T. Civitello wrote:

Could someone please refresh my memory? I want to put a shortcut to a Web site on the desktop. I have done it in the past but I don’t remember how.  Thanks, Tom

Re: Spell check in Word 2016

Alan Robbins
 

Thanks to all for a variety of ways to spell check in Word 2016. Preferred
the old way but technology moves on and we must too.

Al

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin
via Groups.Io
Sent: Monday, December 17, 2018 1:37 PM
To: main@jfw.groups.io
Subject: Re: Spell check in Word 2016

Alt F7 takes you to each misspelled word. Issue with this method is that it
opens the context menu with suggested changes in it. That often works, but
you have to press Escape once or twice to get out and read the word in
context if it's not obvious what word it is. I think this is a Word
Command, not a JAWS one, so it probably works well for sighted users who can
see the misspelled word and are ready to see the list of suggestions.

The reason it works differently in Word from Outlook is that Outlook still
uses the old dialog box interface, whereas Word has gone to a ride side pane
display for spell check.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Monday, December 17, 2018 8:50 AM
To: main@jfw.groups.io
Subject: Re: Spell check in Word 2016

I don't like it either, but better than nothing. If you press enter on the
word JAWS finds, I think it takes you to it. I still use f7, then escape to
find the word, then try to figure it from there. Stinkin' annoying!
At 09:36 AM 12/17/2018, you wrote:
Ann,

Thanks, did not know about this. Better than nothing but it does not
take you to where you are in the document so you can ctrl arrow around
to see the context. It also does not spell the misspelled work out and
then give choices. Workable, yes, preferred to the normal behavior with F7,
no.
Thanks for sharing

Al

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Sunday, December 16, 2018 8:13 PM
To: main@jfw.groups.io
Subject: Re: Spell check in Word 2016

In her Word 2016 text book, KathyAnn Murtha recommends either using the
JAWS command alt+shift+l to locate misspelled words, or insert+z to
invoke Word's quick keys, then the lletter m to locate misspelled
words. Once you have found a misspelleing, use the applications key to
suggest corrections.
At 06:36 PM 12/16/2018, you wrote:
Using Win 10 pro version 1803, and latest version of Jaws 2019 I do
not get full speech when doing a spell/grammar check in Word 2016.
When I hit F7 to do the spell check in an open Word document, I'm
given an option to change language and as I tab possible suggested
correctly spelled words. The problem is Jaws is not reading me the
word that is spelled wrong so I do not know what I'm replacing or if
I want to replace. Anyone found a work around for this?
This does not happen in outlook 2016, spell check works the way it is
supposed to.
Al










This communication may contain privileged and/or confidential information.
It is intended solely for the use of the addressee. If you are not the
intended recipient, you are strictly prohibited from disclosing, copying,
distributing or using any of this information. If you received this
communication in error, please contact the sender immediately and destroy
the material in its entirety, whether electronic or hard copy. This
communication may contain nonpublic personal information about consumers
subject to the restrictions of the Gramm-Leach-Bliley Act. You may not
directly or indirectly reuse or redisclose such information for any purpose
other than to provide the services for which you are receiving the
information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or services
from Key send an e-mail to mailto:DNERequests@... with 'No Promotional
E-mails' in the SUBJECT line.