This is clearly off-topic, so if you'd care to take it private to number6@..., I understand.

So, I didn't uninstall, I have a smart television, what do I need to do in order to play media--MP4 and AVI--from my home network to the television using Plex?

I use plex on a freenas server at my home and you dont need to buy a plex pass to watch movies. the pass gets you music streaming and tv shows. We also have it set up at our Air B and B for the 2 guest units and have no issues with them watching movies off the house server.

 

On 11/6/2019 8:37 AM, Steve Matzura wrote:

Yes, I think you're right on that decision. I have it installed, think I'll uninstall it right now.

 

On 11/6/2019 9:15 AM, Richard Turner wrote:

Reading about it on their web site and also about the iOS version in the app store, there are many features (not clearly specified) that are only available in the premium subscription.  The rates shown on the iOS app are $4.99 per month, or $39.99 per year or $149.99 for a lifetime Plex Pass.

One person said it takes forever to transfer files since it converts the format instead of using multiple formats.

They tried transferring a movie and many, many hours later it wasn’t finished.  He canceled that and manually copied it to OneDrive in 27 seconds.

Of course, that is copying to another place on the hard drive, but I know the sync time for OneDrive is very fast.

 

So, after reading about this with all of its promises, I think I will pass on this one.

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Matzura
Sent: Wednesday, November 6, 2019 6:01 AM
To: main@jfw.groups.io
Subject: Re: JAWS and Plex Media Server

 

It can be installed and used, I just don't know how to use it. I have it installed here, but don't have the first idea of what to do with it.

 

On 11/5/2019 2:33 PM, Blackwell, Clifford wrote:

I’m about to try to install Plex on a Wondows 7 desktop running j2019 or possibly j2020.  Does anyone have any experience installing and running a Plex Media Server with JAWS?

 

 

Tony,

I'll describe how I do it with Word 1010 on my desktop computer running Windows 7. Your results may vary depending on your version of Wofd.

1.   Open the applicable docx file with the label. I normally save mailing label files which only contain the address to be printed.

2.   I press alt + M to place focus on the top ribbon bar and right arrow until Mailings has focus then I down arrow to move to the lower ribbon bar.

3.   I right arrow until I hear Labels and press the enter key.

4.   A mailing label dialog opens with the address from the docx file already listed and highlighted in the address section of the dialog.

5.   Alt + F selects the radio button to print a full page of the same label and alt + N selects the radio button to print a single label.

6.   Tab once to move to the spin box to select the row of labels on which the single label is located and tab once again to move to the spinner box to select the column to select the appropriate column.

7.    Press alt + O to open the dialog where you can select the label model and type.

8.   After all settings are selected, press alt + P to print the label.

Alan Lemly

How do I tell Word which position to print a label.  The times I have tried it arrowing down or right did not always go to the position I intended.

Tony

Tony,

If I'm understanding your question, I don't have any great workarounds for identifying which labels are left on a sheet of Avery 5160 which contain 10 rows of 3 labels per row as I mentioned in my first post. I can sort of feel by touch which labels have been used so I can properly identify the row and column of the next unused label when printing individual labels. Also, when I've moved down a sheet so that the only ones left are the bottom two rows, I can flip the sheet over so that those two remaining rows are at the top so it's like I'm starting with row 1 again.

I hope this helps but post back if I misunderstood your question.

Alan

I have had some problems putting individual labels into the correct spot on a partially used label sheet.  Do you have any suggestions for that?

Tony

I learned a long time ago after repeated envelope jams in the office laser printer to print on labels instead of envelopes. I prefer the Avery 5160 labels which come 3 to a row with 10 rows for a total of 30 labels on a sheet the same size as an 8 and a half by 11 inch sheet of paper and that can be loaded in a laser printer paper tray. Microsoft Word allows for label printing and you can select the label type and style and either print a full page of the same label or specifically identify what row and column label you are printing and print them individually. The sheet never jams in my black and white laser printer and I remove the printed label from the sheet and stick it on my envelope of choice for mailing. I keep a full sheet of return address labels which I use as needed.

I recommend that those having trouble printing addresses on envelopes give this method a go. It works great with Word 2010.

Alan Lemly

Yes, that is true. The instructions I gave assumed you were in M S Word.

Alison

You are not making any sense.  You cannot print an envelope without some kind of program.  You cannot simply place an envelope in the printer and print an address on it without launching a program like MS Word to print it.  So which program are you using?

Gerald

Until I bought my Dymo Label Printer I just printed envelopes in the following way without the need to get special programmes:

 

First, take out your paper from the printer and place your envelope in it with the flap facing upwards and move the slider across till it touches the edge of the envelope.

Now save the address to your clipboard.

Then press alt m (for mail) and e (for envelope) and the press enter on the first option, which I think is envelopes and copy the address into the edit field.

Then tab down to print.

 

Hopefully the job is doen.

 

But I have to say my Dymo label printer is one of the most useful gadgets I have ever purchased.

 

Alison

I have always received a newsletter Email from FS announcing the release of the update including links to the update files.
I have not received that Email yet and wonder where the other members of this list found out about the release of the update.

Thanks,



John Doering
Pricing Analyst
Office: 4147783040 Extn:4063
Mobile:
445 S Curtis Rd West Allis, WI 53214
https://ibvi.org
Industries for the Blind & Visually Impaired accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Friday, November 8, 2019 11:37 AM
To: main@jfw.groups.io
Subject: Re: JAWS 2020 update Email

I have never received such an email from FS about an upgrade to a new version. being subscribed to this ml, someone eventually tends to mention it (Mike B).



On 11/8/2019 12:20 PM, John Doering wrote:
Hello:

I thought I would wait to receive the Email from FS before updating to
2020.  I have not received anything yet.  Has anyone else not heard from
FS regarding the 2020 update?

Thanks in advance,

*John Doering*
Pricing Analyst

Office: 4147783040 Extn:4063
Mobile:
445 S Curtis Rd West Allis, WI 53214
https://ibvi.org

Industries for the Blind & Visually Impaired accepts no liability for
the content of this email, or for the consequences of any actions taken
on the basis of the information provided, unless that information is
subsequently confirmed in writing. If you are not the intended
recipient, you are notified that disclosing, copying, distributing or
taking any action in reliance on the contents of this information is
strictly prohibited.

Hello:

I thought I would wait to receive the Email from FS before updating to 2020.  I have not received anything yet.  Has anyone else not heard from FS regarding the 2020 update?

 

Thanks in advance,

 

John Doering
Pricing Analyst

Office: 4147783040 Extn:4063
Mobile:
445 S Curtis Rd West Allis, WI 53214
https://ibvi.org

Industries for the Blind & Visually Impaired accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

I use plex on a freenas server at my home and you dont need to buy a plex pass to watch movies. the pass gets you music streaming and tv shows. We also have it set up at our Air B and B for the 2 guest units and have no issues with them watching movies off the house server.

On 11/6/2019 8:37 AM, Steve Matzura wrote:

Yes, I think you're right on that decision. I have it installed, think I'll uninstall it right now.

On 11/6/2019 9:15 AM, Richard Turner wrote:

Reading about it on their web site and also about the iOS version in the app store, there are many features (not clearly specified) that are only available in the premium subscription.  The rates shown on the iOS app are $4.99 per month, or $39.99 per year or $149.99 for a lifetime Plex Pass.

One person said it takes forever to transfer files since it converts the format instead of using multiple formats.

They tried transferring a movie and many, many hours later it wasn’t finished.  He canceled that and manually copied it to OneDrive in 27 seconds.

Of course, that is copying to another place on the hard drive, but I know the sync time for OneDrive is very fast.

 

So, after reading about this with all of its promises, I think I will pass on this one.

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Matzura
Sent: Wednesday, November 6, 2019 6:01 AM
To: main@jfw.groups.io
Subject: Re: JAWS and Plex Media Server

 

It can be installed and used, I just don't know how to use it. I have it installed here, but don't have the first idea of what to do with it.

 

On 11/5/2019 2:33 PM, Blackwell, Clifford wrote:

I’m about to try to install Plex on a Wondows 7 desktop running j2019 or possibly j2020.  Does anyone have any experience installing and running a Plex Media Server with JAWS?

 

 

How do I tell Word which position to print a label.  The times I have tried it arrowing down or right did not always go to the position I intended.

Tony

Tony,

If I'm understanding your question, I don't have any great workarounds for identifying which labels are left on a sheet of Avery 5160 which contain 10 rows of 3 labels per row as I mentioned in my first post. I can sort of feel by touch which labels have been used so I can properly identify the row and column of the next unused label when printing individual labels. Also, when I've moved down a sheet so that the only ones left are the bottom two rows, I can flip the sheet over so that those two remaining rows are at the top so it's like I'm starting with row 1 again.

I hope this helps but post back if I misunderstood your question.

Alan

I have had some problems putting individual labels into the correct spot on a partially used label sheet.  Do you have any suggestions for that?

Tony

I learned a long time ago after repeated envelope jams in the office laser printer to print on labels instead of envelopes. I prefer the Avery 5160 labels which come 3 to a row with 10 rows for a total of 30 labels on a sheet the same size as an 8 and a half by 11 inch sheet of paper and that can be loaded in a laser printer paper tray. Microsoft Word allows for label printing and you can select the label type and style and either print a full page of the same label or specifically identify what row and column label you are printing and print them individually. The sheet never jams in my black and white laser printer and I remove the printed label from the sheet and stick it on my envelope of choice for mailing. I keep a full sheet of return address labels which I use as needed.

I recommend that those having trouble printing addresses on envelopes give this method a go. It works great with Word 2010.

Alan Lemly

Yes, that is true. The instructions I gave assumed you were in M S Word.

Alison

You are not making any sense.  You cannot print an envelope without some kind of program.  You cannot simply place an envelope in the printer and print an address on it without launching a program like MS Word to print it.  So which program are you using?

Gerald

Until I bought my Dymo Label Printer I just printed envelopes in the following way without the need to get special programmes:

 

First, take out your paper from the printer and place your envelope in it with the flap facing upwards and move the slider across till it touches the edge of the envelope.

Now save the address to your clipboard.

Then press alt m (for mail) and e (for envelope) and the press enter on the first option, which I think is envelopes and copy the address into the edit field.

Then tab down to print.

 

Hopefully the job is doen.

 

But I have to say my Dymo label printer is one of the most useful gadgets I have ever purchased.

 

Alison

Thanks all and yes, the home version also can be installed on 3 computers.
Is it a good idea to go for sma as well?
I am trying to decide if I should go for sma as well along with purchase of JAWS?
Thanks
Meesha

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of netbat66
Sent: Thursday, November 7, 2019 4:56 AM
To: main@jfw.groups.io
Subject: Re: Any difference between JAWS home and commercial version

Not so. The home version can only be installed on 3 computers. the pro version i think is 5 or more computers. and you can use remote access to another computer.
other then this they are the same

-----Original Message-----
From: Dave Durber
Sent: Wednesday, November 06, 2019 1:50 PM
To: main@jfw.groups.io
Subject: Re: Any difference between JAWS home and commercial version


The JAWS Home Edition is the same as having the JAWS Proffessional edition. In
other words, there is no difference, except in the name and the difference in
the price.

HTH

Sincerely:

Dave Durber

----- Original Message -----

From: ARORA Meesha
To: main@jfw.groups.io
Sent: Wednesday, November 06, 2019 3:36 PM
Subject: Any difference between JAWS home and commercial version


Hello members,

I am currently using JAWS 2020 commercial license in my office and I am
interested to purchase JAWS 2020 Home edition for my personal use.

Is there is a difference in the functionalities while using various
applications in both the editions-home and commercial version?

I have got Windows 10 home edition in my personal laptop.

Also is it a good idea to purchase SMA along with JAWS?

Thanks,

Meesha

so, if someone I know wants (needs)not2020, they can pay for the annual
subscription even though they stopped with version 18, and not have to
pay for version 2018 and 2019?


On 11/8/2019 1:12 PM, Van Lant, Robin via Groups.Io wrote:
Mario,
The big selling point to the annual license is that you won't need to
do any catch up payments to get the newest license. Eric D. says this a
lot on the FS Cast for those who have an older version of JAWS. For
those of us with a current SMA, it doesn’t seem to be a benefit to move
to the annual license. It really is a nice method for breaking down the
initial investment barrier and also for allowing people to move between
screen readers without the guilt of having purchased a really expensive
initial license.





-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io On Behalf Of Mario
Sent: Friday, November 8, 2019 8:45 AM
To: main@jfw.groups.io
Subject: Re: Any difference between JAWS home and commercial version

Sieghard, just curious... if one falls behind in renewing their SMA
and decides to switch to purchasing the annual subscription, do they pay
for one subscription to update to the latest version therefore skipping
payment for the versions where they stopped, or do they have to pay for
each version that leads up to the latest version?


On 11/8/2019 7:01 AM, ARORA Meesha wrote:
Thank you for explaining it so well. And yes, the dealer in India
is giving discount on purchasing JAWS along with SMA for next two years.
SO I will be covered for three years.
Thank you. It's nice to have your opinion:)
Have a nice weekend!
Meesha


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io On Behalf Of Sieghard
Weitzel
Sent: Thursday, November 7, 2019 11:34 PM
To: main@jfw.groups.io
Subject: Re: Any difference between JAWS home and commercial version

If you buy Jaws you should absolutely and positively buy the SMA
with it and, unless you for some reason absolutely can't afford it you
should maintain that SMA. Given the relatively rapid development of
Windows 10, you will find that in 2 or 3 or 4 years you may not be able
to get the best experience from Windows 10 unless you also have the
latest release of Jaws, furthermore new features are added which often
can be very useful such as Picture Smart in Jaws 2019 or the new Jaws
Scan cursor in Jaws 2020 which kicks in whenever you open a Windows 10
app such as the Calculator etc. If you don't get an SMA which entitles
you to two full upgrades and you want to upgrade, say in 3 years, you
then basically have to buy two sMA'S, the first to cover you for the two
versions you missed and another to get you up to date. For example:

Say you now buy Jaws 2020 along with an SMA. This will get you full
access to Jaws 2020 and it will also entitle you to get Jaws 2021 and
Jaws 2022.
Lets assume you buy Jaws 2020 without SMA, but in the fall of 2022
you want to get Jaws 2023.
You would then have to buy two SMA's, one to cover Jaws 2021 and
Jaws 2022, then a second SMA which would then get you Jaws 2023 and
entitle you to Jaws 2024.
In the end you pay the same except you have to pay for two SMA's
all at once and you may actually pay more because often if you buy an
SMA right away you get it for a slightly lesser price. I believe you are
in India and I don't know how it is handled there, but I believe in the
US and Canada you get a bit of a discount if you buy a new SMA within a
couple of months after the old one runs out.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io On Behalf Of ARORA Meesha
Sent: Thursday, November 7, 2019 12:46 AM
To: main@jfw.groups.io
Subject: Re: Any difference between JAWS home and commercial version

Thanks all and yes, the home version also can be installed on 3
computers.
Is it a good idea to go for sma as well?
I am trying to decide if I should go for sma as well along with
purchase of JAWS?
Thanks
Meesha

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io On Behalf Of netbat66
Sent: Thursday, November 7, 2019 4:56 AM
To: main@jfw.groups.io
Subject: Re: Any difference between JAWS home and commercial version

Not so. The home version can only be installed on 3 computers. the
pro version i think is 5 or more computers. and you can use remote
access to another computer.
other then this they are the same

-----Original Message-----
From: Dave Durber
Sent: Wednesday, November 06, 2019 1:50 PM
To: main@jfw.groups.io
Subject: Re: Any difference between JAWS home and commercial version


The JAWS Home Edition is the same as having the JAWS Proffessional
edition. In other words, there is no difference, except in the name and
the difference in the price.

HTH

Sincerely:

Dave Durber

----- Original Message -----

From: ARORA Meesha
To: main@jfw.groups.io
Sent: Wednesday, November 06, 2019 3:36 PM
Subject: Any difference between JAWS home and commercial version


Hello members,

I am currently using JAWS 2020 commercial license in my office and
I am interested to purchase JAWS 2020 Home edition for my personal use.

Is there is a difference in the functionalities while using various
applications in both the editions-home and commercial version?

I have got Windows 10 home edition in my personal laptop.

Also is it a good idea to purchase SMA along with JAWS?

Thanks,

Meesha





















This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. If you
are not the intended recipient, you are strictly prohibited from
disclosing, copying, distributing or using any of this information. If
you received this communication in error, please contact the sender
immediately and destroy the material in its entirety, whether electronic
or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or
redisclose such information for any purpose other than to provide the
services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114
If you prefer not to receive future e-mail offers for products or
services from Key
send an e-mail to mailto:DNERequests@key.com with 'No Promotional
E-mails' in the
SUBJECT line.

Yes, I think you're right on that decision. I have it installed, think I'll uninstall it right now.

On 11/6/2019 9:15 AM, Richard Turner wrote:

Reading about it on their web site and also about the iOS version in the app store, there are many features (not clearly specified) that are only available in the premium subscription.  The rates shown on the iOS app are $4.99 per month, or $39.99 per year or $149.99 for a lifetime Plex Pass.

One person said it takes forever to transfer files since it converts the format instead of using multiple formats.

They tried transferring a movie and many, many hours later it wasn’t finished.  He canceled that and manually copied it to OneDrive in 27 seconds.

Of course, that is copying to another place on the hard drive, but I know the sync time for OneDrive is very fast.

 

So, after reading about this with all of its promises, I think I will pass on this one.

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Matzura
Sent: Wednesday, November 6, 2019 6:01 AM
To: main@jfw.groups.io
Subject: Re: JAWS and Plex Media Server

 

It can be installed and used, I just don't know how to use it. I have it installed here, but don't have the first idea of what to do with it.

 

On 11/5/2019 2:33 PM, Blackwell, Clifford wrote:

I’m about to try to install Plex on a Wondows 7 desktop running j2019 or possibly j2020.  Does anyone have any experience installing and running a Plex Media Server with JAWS?

 

 

I have always received a newsletter Email from FS announcing the release of the update including links to the update files.

I have not received that Email yet and wonder where the other members of this list found out about the release of the update.

Thanks,

John Doering

Pricing Analyst

Office: 4147783040 Extn:4063

Mobile:

445 S Curtis Rd West Allis, WI 53214

https://ibvi.org

Industries for the Blind & Visually Impaired accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario

Sent: Friday, November 8, 2019 11:37 AM

To: main@jfw.groups.io

Subject: Re: JAWS 2020 update Email

I have never received such an email from FS about an upgrade to a new version. being subscribed to this ml, someone eventually tends to mention it (Mike B).

On 11/8/2019 12:20 PM, John Doering wrote:

  Hello:

  I thought I would wait to receive the Email from FS before updating to

  2020.  I have not received anything yet.  Has anyone else not heard from

  FS regarding the 2020 update?

  Thanks in advance,

  *John Doering*

  Pricing Analyst

  Office: 4147783040 Extn:4063

  Mobile:

  445 S Curtis Rd West Allis, WI 53214

  https://ibvi.org

  Industries for the Blind & Visually Impaired accepts no liability for

  the content of this email, or for the consequences of any actions taken

  on the basis of the information provided, unless that information is

  subsequently confirmed in writing. If you are not the intended

  recipient, you are notified that disclosing, copying, distributing or

  taking any action in reliance on the contents of this information is

  strictly prohibited.

On 8 Nov 2019, at 16:56, Ann Byrne <annakb@sbcglobal.net> wrote:

My student now owns a perpetual licensed copy of JFW. I would like to remove the annual license authorization for her computer and replace it with the ILM version. I supposed go to help and uninstall. what happens to the authorization indicator when I do that? Does it need to go to an external medium, or does it just disappear into oblivion able to be accessed through the estore/portal somehow???

Thanks,

Ann (serial 1598)