1. main@jfw.groups.io
   Date   
moderated Re: Addressing envelopes

Brian Vogel
 

Tony,

           Though I could swear there used to be a way to do this in MS-Office, I can't find it now myself.  However, one can do it in the printer settings for many printers.  When I go to print an envelope, if I open Printer Properties from within the MS-Word print dialog, then go to the Page Setup dialog, there is a checkbox for Rotate 180 degrees, which does just that.  You must also remember to rotate your envelope 180 degrees from normal, too, if you want the flap to be in its usual position at the top when you do this.

            If you have an actual envelope document, you can specify to always use those printer settings for it so that you only have to go through this once.
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer
moderated Re: Addressing envelopes

Tony
 

I use Microsoft Office to print envelopes.  It pulls the mailing address from an open letter and has a stored return address that can be printed or not as you wish.  There is also an address book option.

 

My printer tends to wrinkle the end of the envelope where the return address is printed.  If anyone knows how to rotate the printing so that the return address end of the envelope is printed first the wrinkle would be on the postage end where there is no printing.

 

Tony

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of HH. Smith Jr.
Sent: Tuesday, November 05, 2019 9:31 PM
To: jfw@groups.io
Subject: Addressing envelopes

 

Hello Fellow Listerrs,

 

This subject has probably been breached before, but here goes. Has anyone had any experience with an accessible envelope addressing software; whether, free or not.

 

Thx,
moderated Re: reading the comments on the excel.

Mario
 

it's alt+shift+apostrophe. your pressing control+shift+apostrophe which
brings a list of cells with comments, which you happily found.

On 11/5/2019 10:55 PM, Shankar C wrote:
oops, sorry, anyway, after pressing ctrl,shift,' key combination, the
jaws just read's as Cells with Comments dialog
List1 List view
E36: Shankar :
1 of 10.
but, I want to read the content of the comment.



On 11/5/19, Mario <mrb620@hotmail.com> wrote:
try pressing alt+shift+apostrophe. this works in Excel 2010 and
presumably 2013, 2016 and 2019. but not sure if the keystroke works in
Excel 365.


On 11/5/2019 9:59 AM, Mario wrote:
please top post when composing an email for the list. if you're not sure
as how to do it, ask. include if you're using an email client or
composing from a website (and which one).


On 11/4/2019 11:07 PM, Shankar C wrote:
moderated Re: JAWS and Plex Media Server

Richard Turner
 

Reading about it on their web site and also about the iOS version in the app store, there are many features (not clearly specified) that are only available in the premium subscription.  The rates shown on the iOS app are $4.99 per month, or $39.99 per year or $149.99 for a lifetime Plex Pass.

One person said it takes forever to transfer files since it converts the format instead of using multiple formats.

They tried transferring a movie and many, many hours later it wasn’t finished.  He canceled that and manually copied it to OneDrive in 27 seconds.

Of course, that is copying to another place on the hard drive, but I know the sync time for OneDrive is very fast.

 

So, after reading about this with all of its promises, I think I will pass on this one.

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Matzura
Sent: Wednesday, November 6, 2019 6:01 AM
To: main@jfw.groups.io
Subject: Re: JAWS and Plex Media Server

 

It can be installed and used, I just don't know how to use it. I have it installed here, but don't have the first idea of what to do with it.

 

On 11/5/2019 2:33 PM, Blackwell, Clifford wrote:

I’m about to try to install Plex on a Wondows 7 desktop running j2019 or possibly j2020.  Does anyone have any experience installing and running a Plex Media Server with JAWS?

 

 
moderated Re: JAWS and Plex Media Server

Steve Matzura
 

It can be installed and used, I just don't know how to use it. I have it installed here, but don't have the first idea of what to do with it.


On 11/5/2019 2:33 PM, Blackwell, Clifford wrote:

I’m about to try to install Plex on a Wondows 7 desktop running j2019 or possibly j2020.  Does anyone have any experience installing and running a Plex Media Server with JAWS?

 

 
moderated Re: Addressing envelopes

CJ &AA MAY
 

My Dymo Printer is two or three years old now but I got it from Amazon and it works very well with Jaws.

Alison

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Liz and Hope
Sent: 06 November 2019 11:36
To: main@jfw.groups.io
Subject: Re: Addressing envelopes

 

Good morning! I am in the Business Enterprise program, and I accepted an offer to operate a cafe yesterday. When I was in training my trainer used a dymo labeler printer to make labels for products such as sandwiches and bagels. I want to purchase a dymo labeler printer for my cafe. Which dymo labeler printer would work best with JAWS, and where can I purchase it? Any help will be appreciated. 

 

 

Liz Ulrich and leader Dog hope 



On Nov 6, 2019, at 3:56 AM, CJ &AA MAY <chrisalismay@...> wrote:



Until I bought my Dymo Label Printer I just printed envelopes in the following way without the need to get special programmes:

 

First, take out your paper from the printer and place your envelope in it with the flap facing upwards and move the slider across till it touches the edge of the envelope.

Now save the address to your clipboard.

Then press alt m (for mail) and e (for envelope) and the press enter on the first option, which I think is envelopes and copy the address into the edit field.

Then tab down to print.

 

Hopefully the job is doen.

 

But I have to say my Dymo label printer is one of the most useful gadgets I have ever purchased.

 

Alison
moderated Re: Addressing envelopes

CJ &AA MAY
 

Yes, that is true. The instructions I gave assumed you were in M S Word.

Alison

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Gerald Levy via Groups.Io
Sent: 06 November 2019 11:55
To: main@jfw.groups.io
Subject: Re: Addressing envelopes

 

 

You are not making any sense.  You cannot print an envelope without some kind of program.  You cannot simply place an envelope in the printer and print an address on it without launching a program like MS Word to print it.  So which program are you using?

 

Gerald

 

 

On 11/6/2019 3:56 AM, CJ &AA MAY wrote:

Until I bought my Dymo Label Printer I just printed envelopes in the following way without the need to get special programmes:

 

First, take out your paper from the printer and place your envelope in it with the flap facing upwards and move the slider across till it touches the edge of the envelope.

Now save the address to your clipboard.

Then press alt m (for mail) and e (for envelope) and the press enter on the first option, which I think is envelopes and copy the address into the edit field.

Then tab down to print.

 

Hopefully the job is doen.

 

But I have to say my Dymo label printer is one of the most useful gadgets I have ever purchased.

 

Alison
moderated Re: Virtual Cursor no longer appears to work on Firefox

Chris Hill
 

Nope, working fine here.  If you aren't running malware bytes, I'd suggest downloading it and scanning your system.


On 11/6/2019 04:26, John Gurd via Groups.Io wrote:

Is anyone else seeing this behaviour? I can only get the PC cursor on Firefox suddenly so I can’t list links, etc.

 

John

 
moderated Re: How to transfer notes from Google keep to onenote?

Jessica D
 

Hello,
As far as I can tell, yes, it’s accessible.
It’s a little clunky with Jaws, but it does work. It works best on iOS.


On Nov 5, 2019, at 10:20 PM, Rod <rodalcidonis@...> wrote:


Is Onenote accessible? The last I check it was not.
 
 

Rod Alcidonis, Esq.
 
From: Jessica D
Sent: Tuesday, November 5, 2019 8:59 PM
To: main@jfw.groups.io
Subject: How to transfer notes from Google keep to onenote?
 

Hi,

 

I’m in the process of moving all my notes over to OneNote from 3 or 4 other places.

One of those places is Google keep.

 

How can I get my data from keep into OneNote?

 

I’ve done some research but my research shows that I’m supposed to use an app my pc says isn’t safe, so I’m not really sure what to do, because of course, I don’t want to harm my computer.

 

Can anyone help?

 

Thanks,

 

Jessica

 
moderated Re: Addressing envelopes

Gerald Levy
 


You are not making any sense.  You cannot print an envelope without some kind of program.  You cannot simply place an envelope in the printer and print an address on it without launching a program like MS Word to print it.  So which program are you using?


Gerald



On 11/6/2019 3:56 AM, CJ &AA MAY wrote:

Until I bought my Dymo Label Printer I just printed envelopes in the following way without the need to get special programmes:

 

First, take out your paper from the printer and place your envelope in it with the flap facing upwards and move the slider across till it touches the edge of the envelope.

Now save the address to your clipboard.

Then press alt m (for mail) and e (for envelope) and the press enter on the first option, which I think is envelopes and copy the address into the edit field.

Then tab down to print.

 

Hopefully the job is doen.

 

But I have to say my Dymo label printer is one of the most useful gadgets I have ever purchased.

 

Alison
moderated Re: Addressing envelopes

Liz and Hope
 

Good morning! I am in the Business Enterprise program, and I accepted an offer to operate a cafe yesterday. When I was in training my trainer used a dymo labeler printer to make labels for products such as sandwiches and bagels. I want to purchase a dymo labeler printer for my cafe. Which dymo labeler printer would work best with JAWS, and where can I purchase it? Any help will be appreciated. 


 
Liz Ulrich and leader Dog hope 
HTTP://WWW.FACEBOOK.COM/ELIZABETH.ULRICH.1

On Nov 6, 2019, at 3:56 AM, CJ &AA MAY <chrisalismay@...> wrote:



Until I bought my Dymo Label Printer I just printed envelopes in the following way without the need to get special programmes:

 

First, take out your paper from the printer and place your envelope in it with the flap facing upwards and move the slider across till it touches the edge of the envelope.

Now save the address to your clipboard.

Then press alt m (for mail) and e (for envelope) and the press enter on the first option, which I think is envelopes and copy the address into the edit field.

Then tab down to print.

 

Hopefully the job is doen.

 

But I have to say my Dymo label printer is one of the most useful gadgets I have ever purchased.

 

Alison
moderated Virtual Cursor no longer appears to work on Firefox

John Gurd
 

Is anyone else seeing this behaviour? I can only get the PC cursor on Firefox suddenly so I can’t list links, etc.

 

John

 
moderated Re: Addressing envelopes

CJ &AA MAY
 

Until I bought my Dymo Label Printer I just printed envelopes in the following way without the need to get special programmes:

 

First, take out your paper from the printer and place your envelope in it with the flap facing upwards and move the slider across till it touches the edge of the envelope.

Now save the address to your clipboard.

Then press alt m (for mail) and e (for envelope) and the press enter on the first option, which I think is envelopes and copy the address into the edit field.

Then tab down to print.

 

Hopefully the job is doen.

 

But I have to say my Dymo label printer is one of the most useful gadgets I have ever purchased.

 

Alison
moderated Re: How to maximize Google screen?

Glenn / Lenny
 

If you alt + enter on the desktop icon, there is a selection box where you can arrow to change it from normal window to maximized.
This is the state of the window when the icon/shortcut is activated.
Glenn

----- Original Message -----
From: "David Pearson" <dshawnpearson@suddenlink.net>
To: <main@jfw.groups.io>
Sent: Tuesday, November 05, 2019 10:35 PM
Subject: How to maximize Google screen?


Hello Listers:

Created a keyboard shortcut for Google Chrome. Have just enough light perception in one eye to notice that Chrome isn't opening at its maximum size, but rather in a rectangular shape at far right/bottom of pc screen.

What are the keyboard steps that I need to perform to ensure that when I open Chrome, it's "maximized" on my monitor?

Thank you,



David S. Pearson
moderated How to maximize Google screen?

David Pearson
 

Hello Listers:

Created a keyboard shortcut for Google Chrome. Have just enough light perception in one eye to notice that Chrome isn't opening at its maximum size, but rather in a rectangular shape at far right/bottom of pc screen.

What are the keyboard steps that I need to perform to ensure that when I open Chrome, it's "maximized" on my monitor?

Thank you,



David S. Pearson
moderated Re: reading the comments on the excel.

Shankar C
 

oops, sorry, anyway, after pressing ctrl,shift,' key combination, the
jaws just read's as Cells with Comments dialog
List1 List view
E36: Shankar :
1 of 10.
but, I want to read the content of the comment.

On 11/5/19, Mario <mrb620@hotmail.com> wrote:
try pressing alt+shift+apostrophe. this works in Excel 2010 and
presumably 2013, 2016 and 2019. but not sure if the keystroke works in
Excel 365.


On 11/5/2019 9:59 AM, Mario wrote:
please top post when composing an email for the list. if you're not sure
as how to do it, ask. include if you're using an email client or
composing from a website (and which one).


On 11/4/2019 11:07 PM, Shankar C wrote:




--
----------"Life without God is like an unsharpened pencil - it has no point."
----------
email: harshalgips@gmail.com
msn: harshalgips@hotmail.com
skype: shankar.a
mobile:+919945860671
thanks and regards
shankar
moderated Addressing envelopes

HH. Smith Jr.
 

Hello Fellow Listerrs,

 

This subject has probably been breached before, but here goes. Has anyone had any experience with an accessible envelope addressing software; whether, free or not.

 

Thx,
moderated Re: How to transfer notes from Google keep to onenote?

Rod
 

Is Onenote accessible? The last I check it was not.
 
 

Rod Alcidonis, Esq.
 

From: Jessica D
Sent: Tuesday, November 5, 2019 8:59 PM
To: main@jfw.groups.io
Subject: How to transfer notes from Google keep to onenote?
 

Hi,

 

I’m in the process of moving all my notes over to OneNote from 3 or 4 other places.

One of those places is Google keep.

 

How can I get my data from keep into OneNote?

 

I’ve done some research but my research shows that I’m supposed to use an app my pc says isn’t safe, so I’m not really sure what to do, because of course, I don’t want to harm my computer.

 

Can anyone help?

 

Thanks,

 

Jessica

 
moderated Re: Turning on narrator in Windows 7

James Malone
 

For windows 7, control windows u will bring up several choices, and you must alt tab back and forth  to draw attention to speech. Hope this helps.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Gerald Levy via Groups.Io
Sent: Tuesday, November 5, 2019 1:28 PM
To: main@jfw.groups.io
Subject: Re: Turning on narrator in Windows 7

 

 

I don't care what the MS site says.  Windows key-Enter does not toggle Narrator on and off in Windows 7, at least not on my HP desktop.  I don't think there is any way to toggle it on and off in Windows 7 like there is with the  Windows 10 shortcut key  Control-Windows key-Enter.

 

Gerald

 

 

On 11/5/2019 4:11 PM, Dave Durber wrote:



Hello Richard:

 

I tried WINDOW KEY+ENTER, on a machine running Windows 7, it did not work.

----- Original Message -----

Sent: 05 November, 2019 2:31 PM

Subject: Re: Turning on narrator in Windows 7

 

Sorry, you are right.

Here is what the Microsoft site says:

On a keyboard, press the Windows logo key + Enter.

This will both start and stop narrator.

 

The control key was added in Windows 10.

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Laura Richardson
Sent: Tuesday, November 5, 2019 6:23 AM
To: main@jfw.groups.io
Subject: Re: Turning on narrator in Windows 7

 

Thank you but that does not work in Windows 7.

 

Laura

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Tuesday, November 5, 2019 8:01 AM
To: main@jfw.groups.io
Subject: Re: Turning on narrator in Windows 7

 

Control+Windows-key+Enter.

That is the toggle for Narrator, whether you start it from the edit box or if you start and stop it with that keystroke.

 

.

 

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Laura Richardson
Sent: Tuesday, November 5, 2019 5:56 AM
To: main@jfw.groups.io
Subject: Re: Turning on narrator in Windows 7

 

Thank you …… How do I turn it off?

 

Laura

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Tuesday, November 5, 2019 5:53 AM
To: main@jfw.groups.io
Subject: Re: Turning on narrator in Windows 7

 

Hello Laura:

 

To start Narrator in the current session of Windows 7 but, not have it start each time Windows 7 starts, Tap either WINDOWS KEY, type "narrator" (without the quotes), then press ENTER.

 

HTH

 

Sincerely:

 

Dave Durber

 

----- Original Message -----

Sent: 02 November, 2019 6:19 PM

Subject: Re: Turning on narrator in Windows 7

 

Bill,

 

Thank you for the info.  Narrator came on but it didn’t help.  When I pressed tab, narrator would say tab and when I pressed up or down arrow it would say up arrow or down arrow.  Jaws won’t speak on that computer and I thought narrator might help me figure out why.  That computer has Windows 7 and Jaws 16.  I guess I’ll have to wait until I have sighted help available to tell me what’s on the screen and get Jaws speaking.

 

Laura

   

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Saturday, November 2, 2019 11:36 AM
To: main@jfw.groups.io
Subject: Re: Turning on narrator in Windows 7

 

Hi, Laura. There isn’t one shortcut in Windows 7 to turn on Narrator. Try the following:

 

1. Press Windows key plus U

2. Press ALT plus N.

3. Press ENTER.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Laura Richardson
Sent: Saturday, November 2, 2019 9:20 AM
To: jfw@groups.io
Subject: Turning on narrator in Windows 7

 

Hello,

 

Would someone please give me the shortcut keys for turning narrator on and off in Windows 7?  Thank you in advance.

 

Laura

 
moderated JAWS and Plex Media Server

Blackwell, Clifford
 

I’m about to try to install Plex on a Wondows 7 desktop running j2019 or possibly j2020.  Does anyone have any experience installing and running a Plex Media Server with JAWS?

 

 
12501 - 12520 of 85673  
More
Home Messages Hashtags Subgroups About Features Pricing Updates Terms Help Twitter