Date   

moderated Re: Does the latest ITuneds work with JFW 2019?

 

Except if it's a 32-bit app where the developer never bothered to change it 64-bit, in this case you maybe able to install it on your iPhone (not sure), but it sure won't run since only 64-bit apps will work.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of netbat66
Sent: Friday, September 13, 2019 11:21 AM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

if anyone still has i tunes version 12.60 i would not upgrade. this is the last version that allows you to backup your apps on your computer.
at least if you have bought an app and it is removed from the apple app store you would still have it on your computer and could reinstall it.
you can not do this with the newest i tunes version.

-----Original Message-----
From: Ralph Supernaw
Sent: Friday, September 13, 2019 9:10 AM
To: main@jfw.groups.io
Subject: Does the latest ITuneds work with JFW 2019?



Hi,



I have been putting off letting ITunes update to the latest version. Before I
do I thought I’d find out if I will regret it.



Thanks.


moderated Re: Windows 10 and emojis

David Diamond
 

I tried it in sending a message to myself via computer and even in a post on Facebook.  It worked in both situations.  😊

 

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Maria Campbell
Sent: September 15, 2019 4:08 PM
To: main@jfw.groups.io
Subject: Re: Windows 10 and emojis

 

I brought it up but I had to go to the desktop.

 

 

Maria Campbell

lucky1inct@...

 

All that is necessary for evil to triumph is for good people to do nothing.

 

On 9/15/2019 7:06 PM, Kevin Meyers wrote:

> Nothing happens when I press windows key and the period. Is there some

> other keys I can bring this up?

> -----Original Message-----

> From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard

> Weitzel

> Sent: Sunday, September 15, 2019 4:45 PM

> To: main@jfw.groups.io

> Subject: Re: Windows 10 and emojis

> Windows + Period brings up the emoji panel and you can arrow around or

> if you type something like "face" or grin" it will show only emojis like that.

> -----Original Message-----

> From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy

> Barnett

> Sent: Saturday, September 14, 2019 4:32 PM

> To: main@jfw.groups.io

> Subject: Re: Windows 10 and emojis

> After doing windows period  Did you tab?

> Randy Barnett owner of soundtique

> On Sep 14, 2019, at 1:19 PM, Edward Green <ergreen1981@...> wrote:

> Hi all,

> I wondered whether anyone has found an accessible way to type emojis

> in Windows 10 using JAWS 2019.

> I have tried by bringing up the Windows touch keyboard from the System

> Tray, but don't seem to be able to enter the emojis using JAWS

> commands on the physical keyboard - I have tried the touch cursor without success.

> I have had limited success in finding emojis on the screen itself, but

> scrolling is a bit unreliable/at an awkward angle as I'm using a laptop.

> I have tried a couple of windows shortcuts which are meant to bring up

> emojis - Windows semi-colon and Windows period, but they don't seem to work.

> Does anyone have any suggestions either things I can do differently

> using the methods I've already tried or something else?

> Cheers,

> Ed

>

 

 


moderated Re: Need help with an Excel formula

Kevin Meyers <kevinmeyers@...>
 

I put your formula in my spread sheet and it works. Maybe add sum to the formula. Like:

 

=sum(E3-D3)+F2

 

Both ways worked in my spread sheet.

 

Kevin

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shirley Tracy
Sent: Sunday, September 15, 2019 2:11 PM
To: main@jfw.groups.io
Subject: Need help with an Excel formula

 

Hi Listers,

 

First, I do not fully know how to use Excel like many of you who probably use it for work. But I do use it for keeping our Writers Club’s roster and my bank account spread sheets. I used to have a formula that I could use in keeping a spread sheet of my bank debits and deposits—balancing my account. The formula I was given was =(E3-D3)+F2 and it helped me keep account of the totals when putting in debits and credits. Used to work great. Now, however, when I start a new monthly spread sheet, I get a message that the formula I key in is an error. I don’t know if something has gotten erased from the formula I had in my original file, or if the formulas have changed over time. Otherwise, I have no need to learn Excel. Can someone just please help me with this formula or tell me what might be wrong?

 

Thank you.

 

Shirley

 

 

 

 


moderated Re: Windows 10 and emojis

Maria Campbell
 

I brought it up but I had to go to the desktop.


Maria Campbell
lucky1inct@...

All that is necessary for evil to triumph is for good people to do nothing.

On 9/15/2019 7:06 PM, Kevin Meyers wrote:
Nothing happens when I press windows key and the period. Is there some other
keys I can bring this up?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, September 15, 2019 4:45 PM
To: main@jfw.groups.io
Subject: Re: Windows 10 and emojis

Windows + Period brings up the emoji panel and you can arrow around or if
you type something like "face" or grin" it will show only emojis like that.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Barnett
Sent: Saturday, September 14, 2019 4:32 PM
To: main@jfw.groups.io
Subject: Re: Windows 10 and emojis

After doing windows period Did you tab?

Randy Barnett owner of soundtique

On Sep 14, 2019, at 1:19 PM, Edward Green <ergreen1981@...> wrote:

Hi all,

I wondered whether anyone has found an accessible way to type emojis in
Windows 10 using JAWS 2019.

I have tried by bringing up the Windows touch keyboard from the System Tray,
but don't seem to be able to enter the emojis using JAWS commands on the
physical keyboard - I have tried the touch cursor without success.

I have had limited success in finding emojis on the screen itself, but
scrolling is a bit unreliable/at an awkward angle as I'm using a laptop.

I have tried a couple of windows shortcuts which are meant to bring up
emojis - Windows semi-colon and Windows period, but they don't seem to work.

Does anyone have any suggestions either things I can do differently using
the methods I've already tried or something else?

Cheers,

Ed












moderated Re: Windows 10 and emojis

Kevin Meyers <kevinmeyers@...>
 

Nothing happens when I press windows key and the period. Is there some other
keys I can bring this up?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, September 15, 2019 4:45 PM
To: main@jfw.groups.io
Subject: Re: Windows 10 and emojis

Windows + Period brings up the emoji panel and you can arrow around or if
you type something like "face" or grin" it will show only emojis like that.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Barnett
Sent: Saturday, September 14, 2019 4:32 PM
To: main@jfw.groups.io
Subject: Re: Windows 10 and emojis

After doing windows period Did you tab?

Randy Barnett owner of soundtique

On Sep 14, 2019, at 1:19 PM, Edward Green <ergreen1981@...> wrote:

Hi all,

I wondered whether anyone has found an accessible way to type emojis in
Windows 10 using JAWS 2019.

I have tried by bringing up the Windows touch keyboard from the System Tray,
but don't seem to be able to enter the emojis using JAWS commands on the
physical keyboard - I have tried the touch cursor without success.

I have had limited success in finding emojis on the screen itself, but
scrolling is a bit unreliable/at an awkward angle as I'm using a laptop.

I have tried a couple of windows shortcuts which are meant to bring up
emojis - Windows semi-colon and Windows period, but they don't seem to work.

Does anyone have any suggestions either things I can do differently using
the methods I've already tried or something else?

Cheers,

Ed


moderated Re: Windows 10 and emojis

 

Windows + Period brings up the emoji panel and you can arrow around or if you type something like "face" or grin" it will show only emojis like that.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Barnett
Sent: Saturday, September 14, 2019 4:32 PM
To: main@jfw.groups.io
Subject: Re: Windows 10 and emojis

After doing windows period Did you tab?

Randy Barnett owner of soundtique

On Sep 14, 2019, at 1:19 PM, Edward Green <ergreen1981@...> wrote:

Hi all,

I wondered whether anyone has found an accessible way to type emojis in Windows 10 using JAWS 2019.

I have tried by bringing up the Windows touch keyboard from the System Tray, but don't seem to be able to enter the emojis using JAWS commands on the physical keyboard - I have tried the touch cursor without success.

I have had limited success in finding emojis on the screen itself, but scrolling is a bit unreliable/at an awkward angle as I'm using a laptop.

I have tried a couple of windows shortcuts which are meant to bring up emojis - Windows semi-colon and Windows period, but they don't seem to work.

Does anyone have any suggestions either things I can do differently using the methods I've already tried or something else?

Cheers,

Ed


moderated Re: Need help with an Excel formula

Marty Hutchings
 

I would need to know your columb titles before I could help you.  I also use Excel for bank ledgers, but your formula is a little different than mine.
 
Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13
 

Sent: Sunday, September 15, 2019 2:11 PM
Subject: Need help with an Excel formula
 

Hi Listers,

 

First, I do not fully know how to use Excel like many of you who probably use it for work. But I do use it for keeping our Writers Club’s roster and my bank account spread sheets. I used to have a formula that I could use in keeping a spread sheet of my bank debits and deposits—balancing my account. The formula I was given was =(E3-D3)+F2 and it helped me keep account of the totals when putting in debits and credits. Used to work great. Now, however, when I start a new monthly spread sheet, I get a message that the formula I key in is an error. I don’t know if something has gotten erased from the formula I had in my original file, or if the formulas have changed over time. Otherwise, I have no need to learn Excel. Can someone just please help me with this formula or tell me what might be wrong?

 

Thank you.

 

Shirley

 

 

 

 


moderated Re: Need help with an Excel formula

Glenn / Lenny
 


Hi Shirley,
I find it easiest to just copy the contents of the cell with the formula and pasting it elsewhere.
So I would have both spread sheets open, and go to the cell where the formula works, and do control + C to copy, and control + tab to the other spreadsheet and move to where you want the formula, and paste it with control + V.
HTH.
Glenn

----- Original Message -----
Sent: Sunday, September 15, 2019 2:11 PM
Subject: Need help with an Excel formula

Hi Listers,

 

First, I do not fully know how to use Excel like many of you who probably use it for work. But I do use it for keeping our Writers Club’s roster and my bank account spread sheets. I used to have a formula that I could use in keeping a spread sheet of my bank debits and deposits—balancing my account. The formula I was given was =(E3-D3)+F2 and it helped me keep account of the totals when putting in debits and credits. Used to work great. Now, however, when I start a new monthly spread sheet, I get a message that the formula I key in is an error. I don’t know if something has gotten erased from the formula I had in my original file, or if the formulas have changed over time. Otherwise, I have no need to learn Excel. Can someone just please help me with this formula or tell me what might be wrong?

 

Thank you.

 

Shirley

 

 

 

 


moderated Need help with an Excel formula

Shirley Tracy
 

Hi Listers,

 

First, I do not fully know how to use Excel like many of you who probably use it for work. But I do use it for keeping our Writers Club’s roster and my bank account spread sheets. I used to have a formula that I could use in keeping a spread sheet of my bank debits and deposits—balancing my account. The formula I was given was =(E3-D3)+F2 and it helped me keep account of the totals when putting in debits and credits. Used to work great. Now, however, when I start a new monthly spread sheet, I get a message that the formula I key in is an error. I don’t know if something has gotten erased from the formula I had in my original file, or if the formulas have changed over time. Otherwise, I have no need to learn Excel. Can someone just please help me with this formula or tell me what might be wrong?

 

Thank you.

 

Shirley

 

 

 

 


moderated Re: Absolutely Essential Information to Share When You Have an Issue and How to Get It

David Diamond
 

True however, some don’t know those things so it is good you provided steps to do that.  Like I said, it is a symbiotic relationship. When someone calls me, often they just say, “My dog has issues.”  It is up to me to assess by asking the correct questions what those issues are.   

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: September 15, 2019 11:30 AM
To: main@jfw.groups.io
Subject: Re: Absolutely Essential Information to Share When You Have an Issue and How to Get It

 

On Sun, Sep 15, 2019 at 12:27 PM, David Diamond wrote:

So it’s up to the doctor to ask the right questions. It is, a symbiotic relationship. 

Indeed, but OS Version, Screen Reader Version, and specific software version are the patient's responsibility, and the rough equivalent of Name, Address, and Phone Number.

It needs to be automatically provided, not pried out each and every time.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer


moderated Re: Absolutely Essential Information to Share When You Have an Issue and How to Get It

 

On Sun, Sep 15, 2019 at 12:27 PM, David Diamond wrote:
So it’s up to the doctor to ask the right questions. It is, a symbiotic relationship. 
Indeed, but OS Version, Screen Reader Version, and specific software version are the patient's responsibility, and the rough equivalent of Name, Address, and Phone Number.

It needs to be automatically provided, not pried out each and every time.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

Many of the insights of the saint stem from his experience as a sinner.

         ~ Eric Hoffer


moderated Re: getting rid of inline objects in word

JM Casey
 

Haha..I wouldn’t have said anything, except seeing “carrot” there really cracked me up. I use a braille display more than speech nowadays so these things just jump out at me more.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimsan via Groups.Io
Sent: September 15, 2019 2:27 AM
To: main@jfw.groups.io
Subject: Re: getting rid of inline objects in word

 

Jm Casey,

Lmao, my bad. I just went with the first spell check suggestion.

 

Best regards,

 

Kimsan Song

 

kimsansong@...

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Saturday, September 14, 2019 11:16 AM
To: main@jfw.groups.io
Subject: Re: getting rid of inline objects in word

 

Hey. Glad that method worked for you. It didn’t exactly work for me when I tried it last, but that was a large document OCRed by Adobe Aacrobat and converted to  a word document. There may have been all sorts of weird issues with it.

 

BTW, it’s “caret”, not “carrot”, the vegetable. 8grins*

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimsan via Groups.Io
Sent: September 13, 2019 4:50 PM
To: main@jfw.groups.io
Subject: Re: getting rid of inline objects in word

 

Hi,

I found the answer.

CTRL h for find and replace, type carrot g, in the next box leave it empty, then hit replace all.

All gone.

 

Best regards,

 

Kimsan Song

 

kimsansong@...

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimsan via Groups.Io
Sent: Thursday, September 12, 2019 9:08 AM
To: 'jfw' <jfw@groups.io>
Subject: getting rid of inline objects in word

 

Hi,

Jaws 2019, windows 10 pro latest and word 2016.

 

I press CTRL shift o, there are 218 inline objects, I thought by selecting all with CTRL a and tapping delete would do the trick, but to no avail.

How can I quickly remove these?

Thank you,

Sincerely,

Kimsan Song

kimsansong@...

 


moderated Re: Scanning a document in K1000 and Open Book

Ann Byrne
 

The OpenBook setting doesn't really maintain the format despite what it says. If I needed something exact, I would go with a commercial program like Abbyy fine reader or Prismo. Or even the native ocr package that comes with your scanner.
or At 11:26 AM 9/15/2019, you wrote:

IN Openbook, there is an exact view setting that tries to maintain the original format.
So depending on if you want it to maintain columns or not, there is another setting for that.
I don't have it installed right now so I can't check.


Richard

🭭 Live long and prosper


Check out my web site at: www.turner42.com

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Sunday, September 15, 2019 9:24 AM
To: main@jfw.groups.io
Subject: Re: Scanning a document in K1000 and Open Book

a slight correction and some other info:

when pressing numpad 6, make sure the numpad is set to the reading keypad (insert+numpad - (it's a toggle that cycles)). to save the configuration, press alt+t and then v and enter if there's only the default configuration. you can setup (I don't know if there's a limit) custom configurations taylored to your needs. you can switch to a custom configuration manually after starting K1000 (alt+t and then l, arrow to the configuration name and enter). I don't know if there's a way to automatically load a custom configuration instead of K1000 starting with the default configuration.

-------- Original Message --------
From: Mario [mailto:mrb620@...]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Sunday, September 15, 2019, 11:59 AM
Subject: Scanning a document in K1000 and Open Book in K1000, numpad 6 will toggle between column identification between being enabled or disabled. toggle it to disabled. if you want, don't forget to save the configuration so the setting persists.

-------- Original Message --------
From: tom x [mailto:ballistic719@...]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Saturday, September 14, 2019, 5:26 AM
Subject: Scanning a document in K1000 and Open Book Hi,

Does anyone know if there is a setting which can be altered in the latest versions of either K1000 or Open Book so that the display on the screenor the saved document matches the layout of the original material?

I need to scan some technical material and have the result match the layout of the original document.Currently the lines are joined and all over the place which is vastly different from the original document.

Can anyone help?

Thanks

Tom






.







moderated Re: Does the latest ITuneds work with JFW 2019?

Glenn / Lenny
 


You will want to take the quotes out of this.
Also, mine work better if I keep the M3U file in the same folder as the music and remove the part of the path of each song up to the folder where the music folders are.
Make sure that the folders don't start with a backslash.
Glenn

----- Original Message -----
Sent: Sunday, September 15, 2019 10:58 AM
Subject: Re: Does the latest ITuneds work with JFW 2019?

Is there an m3u file?

Or is that just too old school.  Windows Media used to use m3u files to run the playlist.

I just do them on my iPhone, so probably out to lunch here.

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Saturday, September 14, 2019 4:05 AM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

 

I have tried this and it does not work for me.

It produces an error message no matter what media player I use, VLC Groove Music etc.

Below is the contents of the m3u file I created.

Can anybody tell me why it does not work?

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\01 - Eat For Two.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\02 - Please Forgive Us.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\03 - The Big Parade.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\04 - Trouble Me.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\05 - You Happy Puppet.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\06 - Headstrong.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\07 - Poison In The Well.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\08 - Dust Bowl.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\09 - The Lion's Share.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\10 - Hateful Hate.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\11 - Jubilee.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArt_{04A56B10-1DCC-451B-A74C-9C3E22E60628}_Large.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArt_{04A56B10-1DCC-451B-A74C-9C3E22E60628}_Small.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArtSmall.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\Folder.jpg"

 

 

Sent from Mail for Windows 10

 

From: Glenn / Lenny
Sent: 14 September 2019 01:32
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

 

I find it pretty easy to make a playlist using NotePad and copying the path of the files I want in the playlist.

Shift + applications then the letter A copies the full path of the file for the playlist and then I paste that in NotePad.

I actually use control + space bar for all the files in a folder before doing the copy path command, so I can copy the path of a bunch of files at once.

Then when I'm done and save the TXT file, I exit NotePad and rename the file extension from TXT to M3U.

 

Glenn

 

 

----- Original Message -----

Sent: Friday, September 13, 2019 7:24 PM

Subject: Re: Does the latest ITuneds work with JFW 2019?

 

Kevin,  I use Winamp all of the time and I have created lots of play lists with it.  It is totally keyboard accessible.

 

Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13

 

From: Kevin Meyers

Sent: Friday, September 13, 2019 5:56 PM

Subject: Re: Does the latest ITuneds work with JFW 2019?

 

Does Winamp or Groove allow one to create playlists?

 

From: main@jfw.groups.io <main@JFW.groups.io> On Behalf Of Jaffar Sidek
Sent: Friday, September 13, 2019 5:24 PM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

 

Hi. I wouldn't wish ITune for Windows on my worst enemy.  Stick to Winamp or Groove Music or Windows Media player even and they should do a more then adequate job of allowing you to organize your music collection.  ITunes is excellent on the mac, but  a horror on windows.  Cheers!

On 9/14/2019 2:07 AM, Kevin Meyers wrote:

I started to use ITunes with Jaws 2019 and doesn’t work to well. I have a hard time with the playlists I created to show. Then when I navigate around eventually a certain playlist shows. At least I thought it did. Then I press enter on the play button and it plays a song in a different playlist. Is there a way to change something in Jaws settings or ITune settings to get it to work better?

 

From: main@jfw.groups.io mailto:main@jfw.groups.io On Behalf Of Richard Turner
Sent: Friday, September 13, 2019 12:34 PM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

 

It isn't any worse.

What areas are you most concerned with?

 

Richard

 

Always look out for #1, and be careful not to step in #2.

 

 

On Sep 13, 2019, at 9:10 AM, Ralph Supernaw <rhs@...> wrote:



Hi,

 

I have been putting off letting ITunes update to the latest version.  Before I do I thought I’d find out if I will regret it.

 

Thanks.

 


moderated Re: Absolutely Essential Information to Share When You Have an Issue and How to Get It

David Diamond
 

 Brian, excellent point. It should be noted however on a broad aspect of things that a computer tech it’s like a doctor. Sometimes the patient comes but they don’t know what the problem is. So it’s up to the doctor to ask the right questions. It is, a symbiotic relationship. 


moderated Re: Scanning a document in K1000 and Open Book

Richard Turner
 

IN Openbook, there is an exact view setting that tries to maintain the original format.
So depending on if you want it to maintain columns or not, there is another setting for that.
I don't have it installed right now so I can't check.


Richard

🖖 Live long and prosper


Check out my web site at: www.turner42.com

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: Sunday, September 15, 2019 9:24 AM
To: main@jfw.groups.io
Subject: Re: Scanning a document in K1000 and Open Book

a slight correction and some other info:

when pressing numpad 6, make sure the numpad is set to the reading keypad (insert+numpad - (it's a toggle that cycles)). to save the configuration, press alt+t and then v and enter if there's only the default configuration. you can setup (I don't know if there's a limit) custom configurations taylored to your needs. you can switch to a custom configuration manually after starting K1000 (alt+t and then l, arrow to the configuration name and enter). I don't know if there's a way to automatically load a custom configuration instead of K1000 starting with the default configuration.

-------- Original Message --------
From: Mario [mailto:mrb620@...]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Sunday, September 15, 2019, 11:59 AM
Subject: Scanning a document in K1000 and Open Book in K1000, numpad 6 will toggle between column identification between being enabled or disabled. toggle it to disabled. if you want, don't forget to save the configuration so the setting persists.

-------- Original Message --------
From: tom x [mailto:ballistic719@...]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Saturday, September 14, 2019, 5:26 AM
Subject: Scanning a document in K1000 and Open Book Hi,

Does anyone know if there is a setting which can be altered in the latest versions of either K1000 or Open Book so that the display on the screenor the saved document matches the layout of the original material?

I need to scan some technical material and have the result match the layout of the original document.Currently the lines are joined and all over the place which is vastly different from the original document.

Can anyone help?

Thanks

Tom






.


moderated Re: Scanning a document in K1000 and Open Book

Mario
 

a slight correction and some other info:

when pressing numpad 6, make sure the numpad is set to the reading
keypad (insert+numpad - (it's a toggle that cycles)). to save the
configuration, press alt+t and then v and enter if there's only the
default configuration. you can setup (I don't know if there's a limit)
custom configurations taylored to your needs. you can switch to a custom
configuration manually after starting K1000 (alt+t and then l, arrow to
the configuration name and enter). I don't know if there's a way to
automatically load a custom configuration instead of K1000 starting with
the default configuration.

-------- Original Message --------
From: Mario [mailto:mrb620@...]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Sunday, September 15, 2019, 11:59 AM
Subject: Scanning a document in K1000 and Open Book
in K1000, numpad 6 will toggle between column identification between
being enabled or disabled. toggle it to disabled. if you want, don't
forget to save the configuration so the setting persists.

-------- Original Message --------
From: tom x [mailto:ballistic719@...]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Saturday, September 14, 2019, 5:26 AM
Subject: Scanning a document in K1000 and Open Book
Hi,

Does anyone know if there is a setting which can be altered in the
latest versions of either K1000 or Open Book so that the display on the
screenor the saved document matches the layout of the original material?

I need to scan some technical material and have the result match the
layout of the original document.Currently the lines are joined and all
over the place which is vastly different from the original document.

Can anyone help?

Thanks

Tom






.


moderated Re: Scanning a document in K1000 and Open Book

Mario
 

in K1000, numpad 6 will toggle between column identification between
being enabled or disabled. toggle it to disabled. if you want, don't
forget to save the configuration so the setting persists.

-------- Original Message --------
From: tom x [mailto:ballistic719@...]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Saturday, September 14, 2019, 5:26 AM
Subject: Scanning a document in K1000 and Open Book
Hi,

Does anyone know if there is a setting which can be altered in the
latest versions of either K1000 or Open Book so that the display on the
screenor the saved document matches the layout of the original material?

I need to scan some technical material and have the result match the
layout of the original document.Currently the lines are joined and all
over the place which is vastly different from the original document.

Can anyone help?

Thanks

Tom


moderated Re: Does the latest ITuneds work with JFW 2019?

Richard Turner
 

Is there an m3u file?

Or is that just too old school.  Windows Media used to use m3u files to run the playlist.

I just do them on my iPhone, so probably out to lunch here.

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Saturday, September 14, 2019 4:05 AM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

 

I have tried this and it does not work for me.

It produces an error message no matter what media player I use, VLC Groove Music etc.

Below is the contents of the m3u file I created.

Can anybody tell me why it does not work?

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\01 - Eat For Two.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\02 - Please Forgive Us.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\03 - The Big Parade.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\04 - Trouble Me.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\05 - You Happy Puppet.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\06 - Headstrong.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\07 - Poison In The Well.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\08 - Dust Bowl.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\09 - The Lion's Share.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\10 - Hateful Hate.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\11 - Jubilee.mp3"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArt_{04A56B10-1DCC-451B-A74C-9C3E22E60628}_Large.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArt_{04A56B10-1DCC-451B-A74C-9C3E22E60628}_Small.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\AlbumArtSmall.jpg"

"F:\Drop\Dropbox\Music\10,000 Maniacs\Blind Man's Zoo\Folder.jpg"

 

 

Sent from Mail for Windows 10

 

From: Glenn / Lenny
Sent: 14 September 2019 01:32
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

 

I find it pretty easy to make a playlist using NotePad and copying the path of the files I want in the playlist.

Shift + applications then the letter A copies the full path of the file for the playlist and then I paste that in NotePad.

I actually use control + space bar for all the files in a folder before doing the copy path command, so I can copy the path of a bunch of files at once.

Then when I'm done and save the TXT file, I exit NotePad and rename the file extension from TXT to M3U.

 

Glenn

 

 

----- Original Message -----

Sent: Friday, September 13, 2019 7:24 PM

Subject: Re: Does the latest ITuneds work with JFW 2019?

 

Kevin,  I use Winamp all of the time and I have created lots of play lists with it.  It is totally keyboard accessible.

 

Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13

 

From: Kevin Meyers

Sent: Friday, September 13, 2019 5:56 PM

Subject: Re: Does the latest ITuneds work with JFW 2019?

 

Does Winamp or Groove allow one to create playlists?

 

From: main@jfw.groups.io <main@JFW.groups.io> On Behalf Of Jaffar Sidek
Sent: Friday, September 13, 2019 5:24 PM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

 

Hi. I wouldn't wish ITune for Windows on my worst enemy.  Stick to Winamp or Groove Music or Windows Media player even and they should do a more then adequate job of allowing you to organize your music collection.  ITunes is excellent on the mac, but  a horror on windows.  Cheers!

On 9/14/2019 2:07 AM, Kevin Meyers wrote:

I started to use ITunes with Jaws 2019 and doesn’t work to well. I have a hard time with the playlists I created to show. Then when I navigate around eventually a certain playlist shows. At least I thought it did. Then I press enter on the play button and it plays a song in a different playlist. Is there a way to change something in Jaws settings or ITune settings to get it to work better?

 

From: main@jfw.groups.io mailto:main@jfw.groups.io On Behalf Of Richard Turner
Sent: Friday, September 13, 2019 12:34 PM
To: main@jfw.groups.io
Subject: Re: Does the latest ITuneds work with JFW 2019?

 

It isn't any worse.

What areas are you most concerned with?

 

Richard

 

Always look out for #1, and be careful not to step in #2.

 

 

On Sep 13, 2019, at 9:10 AM, Ralph Supernaw <rhs@...> wrote:



Hi,

 

I have been putting off letting ITunes update to the latest version.  Before I do I thought I’d find out if I will regret it.

 

Thanks.

 


moderated Re: getting rid of inline objects in word

Kimsan <kimsansong@...>
 

Jm Casey,

Lmao, my bad. I just went with the first spell check suggestion.

 

Best regards,

 

Kimsan Song

 

kimsansong@...

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Saturday, September 14, 2019 11:16 AM
To: main@jfw.groups.io
Subject: Re: getting rid of inline objects in word

 

Hey. Glad that method worked for you. It didn’t exactly work for me when I tried it last, but that was a large document OCRed by Adobe Aacrobat and converted to  a word document. There may have been all sorts of weird issues with it.

 

BTW, it’s “caret”, not “carrot”, the vegetable. 8grins*

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimsan via Groups.Io
Sent: September 13, 2019 4:50 PM
To: main@jfw.groups.io
Subject: Re: getting rid of inline objects in word

 

Hi,

I found the answer.

CTRL h for find and replace, type carrot g, in the next box leave it empty, then hit replace all.

All gone.

 

Best regards,

 

Kimsan Song

 

kimsansong@...

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimsan via Groups.Io
Sent: Thursday, September 12, 2019 9:08 AM
To: 'jfw' <jfw@groups.io>
Subject: getting rid of inline objects in word

 

Hi,

Jaws 2019, windows 10 pro latest and word 2016.

 

I press CTRL shift o, there are 218 inline objects, I thought by selecting all with CTRL a and tapping delete would do the trick, but to no avail.

How can I quickly remove these?

Thank you,

Sincerely,

Kimsan Song

kimsansong@...