Date   
moderated Is there a group for accessibility issues regarding Wordpress?

Richard B. McDonald
 

Hi!

 

At wordpress.com, there is an accessibility support group.  However, I have found it nonresponsive and inactive.  So, I am wondering if there is some other support group for accessibility issues such as using a screen reader with WordPress?

 

Thanks,

Richard

moderated Re: jaws does not work properly in admin command window

Munawar Bijani <munawarb@...>
 

Hi,

That's a really good point.

On 6/25/2019 5:52 AM, Sieghard Weitzel wrote:
That may work for you, but if I were to follow your advice not knowing that for some of my work applications I need the accessibility display driver I would seriously break my system and I would then have to do a Jaws repair or reinstall to fix it. It is one thing to explain what you do and what works for you, but you should do so with a warning that this may have negative effects for others, the accessibility display driver was used for a long time and while Vispero is trying to get away from it, there is a reason why it's not yet gone or even unchecked by default.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Munawar Bijani
Sent: Tuesday, June 25, 2019 1:06 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

It gets reinstalled during a jaws repair so it's not too bad to get it back. I always get rid of mine on windows 10 and have yet to face an issue.

On Jun 25, 2019, at 12:07 AM, Sieghard Weitzel <@Sieghard> wrote:

Please don't tell people to uninstall the video accessibility driver, that is very bad advice at this point especially if the accessibility display driver is checked in Settings. If that is the case and you uninstall the video display driver each time your system boots or Jaws restarts it will give you a message that the display driver is missing and while the system may mostly work fine, there are situations where it will not work correctly. I use software, for example, which works only if the accessibility display driver is enabled and in other situations it works better if it is disabled and I use the new so-called GDI or deep level hooking.
In any case, for most people who are just Jaws users and not terribly technically inclined this could have really bad consequences and they would then need tech support to help them fix the problem.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Munawar
Bijani
Sent: Monday, June 24, 2019 6:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Hi,

Ok, try getting rid of the Accessibility Driver. You can either turn it off in JAWS Settings Center or uninstall it completely from "Programs and Features".

On 6/24/2019 5:44 PM, John Covici wrote:
For me, the Jaws cursor does nothing in admin mode, it works fine in
regular mode.

On Mon, 24 Jun 2019 17:28:54 -0400,
Steve Nutt wrote:
Hi,

I think John is saying JAWS doesn't read automatically with it. Yes
you should still be able to read with the JAWS cursor though.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard
Weitzel
Sent: 23 June 2019 20:27
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I just opened Power Shell (Admin) from the Windows + X menu and
typed ipconfig to display my computer's IP configuration and I can
read this with the Jaws cursor.

----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John
Covici
Sent: Sunday, June 23, 2019 12:14 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I want to be able to use powershell, so I am not sure what you mean,
the only thing I see in properties (using powershell) is one
checkbox to toggle legacy console features. However, my problem
appears in both powershell and regular cmd.

On Sun, 23 Jun 2019 14:52:07 -0400,
Steve Nutt wrote:
You may have to set the command prompt to be legacy instead of
using PowerShell.

You can do this in CMD properties.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John
Covici
Sent: 22 June 2019 19:52
To: jfw@groups.io
Subject: jaws does not work properly in admin command window

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the
window, I see the text, but other wise nothing -- jaws cursor
reads nothing as well. Tech support says its not supported, but
that makes no sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...















moderated Re: Help with reading DWM notification

Munawar Bijani <munawarb@...>
 

Hi,,

Try using Convenient OCR and see if it picks up anything.

On 6/25/2019 10:35 AM, Shirley Tracy wrote:

I keep getting DWM notification. How to read and/or clear it.

 

Thanks for any help.

 

Shirley Tracy

 

From: Richard Turner
Sent: Tuesday, June 25, 2019 9:44 AM
To: main@jfw.groups.io
Subject: Re: Marking text.

 

Are you talking just marking to then copy, or cut?

Those keystrokes also work on the web and you follow the insert+space m with the copy command, control+c, etc.

 

Richard

 

Check out my web site at: www.turner42.com

“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.  There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." --Douglas Adams, from Life, The Universe and Everything, p.59

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dean Martineau

Sent: Tuesday, June 25, 2019 4:26 AM

To: main@jfw.groups.io

Subject: Re: Marking text.

 

Yes, you can use JAWS commands to mark blocks of text. All screen readers have this capability now.

 

In the forthcoming book Windows Keyboard Power User Guide, which should actually finally appear in the next couple weeks, I show you how to create a better set of keystrokes to do this, but until then:

 

Go to the beginning of the block you want to set and press ctrl+windows+K.

 

Go to the end of the block and press Jawskey+space, M.

 

 

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of lists@...

Sent: Tuesday, June 25, 2019 6:46 AM

To: main@jfw.groups.io

Subject: Marking text.

 

Hi all.

 

Can anyone tell me, if the beginning and end of a block of text, can be marked using Jaws only? Using Microsoft word.

 

 

Many thanks.

 

Brian.

 

 

 

 

 

 

 

 

 

 

 

moderated Re: Help with reading DWM notification

Dan Longmore
 

 I have a Dell laptop, get the same issue, actually there is nothing on the screen and nothing to clear. We both always takes this away and it has something to do with Dell proprietary software. 

 


From: main@jfw.groups.io on behalf of Shirley Tracy <shirleytracy16@...>
Sent: Tuesday, June 25, 2019 10:35 AM
To: main@jfw.groups.io
Subject: Help with reading DWM notification
 

I keep getting DWM notification. How to read and/or clear it.

 

Thanks for any help.

 

Shirley Tracy

 

From: Richard Turner
Sent: Tuesday, June 25, 2019 9:44 AM
To: main@jfw.groups.io
Subject: Re: Marking text.

 

Are you talking just marking to then copy, or cut?

Those keystrokes also work on the web and you follow the insert+space m with the copy command, control+c, etc.

 

Richard

 

Check out my web site at: www.turner42.com

“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.  There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." --Douglas Adams, from Life, The Universe and Everything, p.59

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dean Martineau

Sent: Tuesday, June 25, 2019 4:26 AM

To: main@jfw.groups.io

Subject: Re: Marking text.

 

Yes, you can use JAWS commands to mark blocks of text. All screen readers have this capability now.

 

In the forthcoming book Windows Keyboard Power User Guide, which should actually finally appear in the next couple weeks, I show you how to create a better set of keystrokes to do this, but until then:

 

Go to the beginning of the block you want to set and press ctrl+windows+K.

 

Go to the end of the block and press Jawskey+space, M.

 

 

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of lists@...

Sent: Tuesday, June 25, 2019 6:46 AM

To: main@jfw.groups.io

Subject: Marking text.

 

Hi all.

 

Can anyone tell me, if the beginning and end of a block of text, can be marked using Jaws only? Using Microsoft word.

 

 

Many thanks.

 

Brian.

 

 

 

 

 

 

 

 

 

 

 

moderated Help with reading DWM notification

Shirley Tracy
 

I keep getting DWM notification. How to read and/or clear it.

 

Thanks for any help.

 

Shirley Tracy

 

From: Richard Turner
Sent: Tuesday, June 25, 2019 9:44 AM
To: main@jfw.groups.io
Subject: Re: Marking text.

 

Are you talking just marking to then copy, or cut?

Those keystrokes also work on the web and you follow the insert+space m with the copy command, control+c, etc.

 

Richard

 

Check out my web site at: www.turner42.com

“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.  There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." --Douglas Adams, from Life, The Universe and Everything, p.59

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dean Martineau

Sent: Tuesday, June 25, 2019 4:26 AM

To: main@jfw.groups.io

Subject: Re: Marking text.

 

Yes, you can use JAWS commands to mark blocks of text. All screen readers have this capability now.

 

In the forthcoming book Windows Keyboard Power User Guide, which should actually finally appear in the next couple weeks, I show you how to create a better set of keystrokes to do this, but until then:

 

Go to the beginning of the block you want to set and press ctrl+windows+K.

 

Go to the end of the block and press Jawskey+space, M.

 

 

 

-----Original Message-----

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of lists@...

Sent: Tuesday, June 25, 2019 6:46 AM

To: main@jfw.groups.io

Subject: Marking text.

 

Hi all.

 

Can anyone tell me, if the beginning and end of a block of text, can be marked using Jaws only? Using Microsoft word.

 

 

Many thanks.

 

Brian.

 

 

 

 

 

 

 

 

 

 

 

moderated Re: Marking text.

Richard Turner
 

Are you talking just marking to then copy, or cut?
Those keystrokes also work on the web and you follow the insert+space m with the copy command, control+c, etc.

Richard

Check out my web site at: www.turner42.com
“The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying. There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss." --Douglas Adams, from Life, The Universe and Everything, p.59

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dean Martineau
Sent: Tuesday, June 25, 2019 4:26 AM
To: main@jfw.groups.io
Subject: Re: Marking text.

Yes, you can use JAWS commands to mark blocks of text. All screen readers have this capability now.

In the forthcoming book Windows Keyboard Power User Guide, which should actually finally appear in the next couple weeks, I show you how to create a better set of keystrokes to do this, but until then:

Go to the beginning of the block you want to set and press ctrl+windows+K.

Go to the end of the block and press Jawskey+space, M.



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of lists@...
Sent: Tuesday, June 25, 2019 6:46 AM
To: main@jfw.groups.io
Subject: Marking text.

Hi all.

Can anyone tell me, if the beginning and end of a block of text, can be marked using Jaws only? Using Microsoft word.


Many thanks.

Brian.

moderated Re: Marking text.

Dean Martineau
 

Yes, you can use JAWS commands to mark blocks of text. All screen readers have this capability now.

In the forthcoming book Windows Keyboard Power User Guide, which should actually finally appear in the next couple weeks, I show you how to create a better set of keystrokes to do this, but until then:

Go to the beginning of the block you want to set and press ctrl+windows+K.

Go to the end of the block and press Jawskey+space, M.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of lists@...
Sent: Tuesday, June 25, 2019 6:46 AM
To: main@jfw.groups.io
Subject: Marking text.

Hi all.

Can anyone tell me, if the beginning and end of a block of text, can be marked using Jaws only? Using Microsoft word.


Many thanks.

Brian.

moderated Marking text.

lists@...
 

Hi all.

Can anyone tell me, if the beginning and end of a block of text, can be marked using Jaws only? Using Microsoft word.


Many thanks.

Brian.

moderated Re: jaws does not work properly in admin command window

 

That may work for you, but if I were to follow your advice not knowing that for some of my work applications I need the accessibility display driver I would seriously break my system and I would then have to do a Jaws repair or reinstall to fix it. It is one thing to explain what you do and what works for you, but you should do so with a warning that this may have negative effects for others, the accessibility display driver was used for a long time and while Vispero is trying to get away from it, there is a reason why it's not yet gone or even unchecked by default.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Munawar Bijani
Sent: Tuesday, June 25, 2019 1:06 AM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

It gets reinstalled during a jaws repair so it's not too bad to get it back. I always get rid of mine on windows 10 and have yet to face an issue.

On Jun 25, 2019, at 12:07 AM, Sieghard Weitzel <@Sieghard> wrote:

Please don't tell people to uninstall the video accessibility driver, that is very bad advice at this point especially if the accessibility display driver is checked in Settings. If that is the case and you uninstall the video display driver each time your system boots or Jaws restarts it will give you a message that the display driver is missing and while the system may mostly work fine, there are situations where it will not work correctly. I use software, for example, which works only if the accessibility display driver is enabled and in other situations it works better if it is disabled and I use the new so-called GDI or deep level hooking.
In any case, for most people who are just Jaws users and not terribly technically inclined this could have really bad consequences and they would then need tech support to help them fix the problem.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Munawar
Bijani
Sent: Monday, June 24, 2019 6:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Hi,

Ok, try getting rid of the Accessibility Driver. You can either turn it off in JAWS Settings Center or uninstall it completely from "Programs and Features".

On 6/24/2019 5:44 PM, John Covici wrote:
For me, the Jaws cursor does nothing in admin mode, it works fine in
regular mode.

On Mon, 24 Jun 2019 17:28:54 -0400,
Steve Nutt wrote:
Hi,

I think John is saying JAWS doesn't read automatically with it. Yes
you should still be able to read with the JAWS cursor though.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard
Weitzel
Sent: 23 June 2019 20:27
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I just opened Power Shell (Admin) from the Windows + X menu and
typed ipconfig to display my computer's IP configuration and I can
read this with the Jaws cursor.

----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John
Covici
Sent: Sunday, June 23, 2019 12:14 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I want to be able to use powershell, so I am not sure what you mean,
the only thing I see in properties (using powershell) is one
checkbox to toggle legacy console features. However, my problem
appears in both powershell and regular cmd.

On Sun, 23 Jun 2019 14:52:07 -0400,
Steve Nutt wrote:
You may have to set the command prompt to be legacy instead of
using PowerShell.

You can do this in CMD properties.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John
Covici
Sent: 22 June 2019 19:52
To: jfw@groups.io
Subject: jaws does not work properly in admin command window

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the
window, I see the text, but other wise nothing -- jaws cursor
reads nothing as well. Tech support says its not supported, but
that makes no sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...














moderated Re: jaws does not work properly in admin command window

Munawar Bijani <munawarb@...>
 

It gets reinstalled during a jaws repair so it's not too bad to get it back. I always get rid of mine on windows 10 and have yet to face an issue.

On Jun 25, 2019, at 12:07 AM, Sieghard Weitzel <@Sieghard> wrote:

Please don't tell people to uninstall the video accessibility driver, that is very bad advice at this point especially if the accessibility display driver is checked in Settings. If that is the case and you uninstall the video display driver each time your system boots or Jaws restarts it will give you a message that the display driver is missing and while the system may mostly work fine, there are situations where it will not work correctly. I use software, for example, which works only if the accessibility display driver is enabled and in other situations it works better if it is disabled and I use the new so-called GDI or deep level hooking.
In any case, for most people who are just Jaws users and not terribly technically inclined this could have really bad consequences and they would then need tech support to help them fix the problem.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Munawar Bijani
Sent: Monday, June 24, 2019 6:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Hi,

Ok, try getting rid of the Accessibility Driver. You can either turn it off in JAWS Settings Center or uninstall it completely from "Programs and Features".

On 6/24/2019 5:44 PM, John Covici wrote:
For me, the Jaws cursor does nothing in admin mode, it works fine in
regular mode.

On Mon, 24 Jun 2019 17:28:54 -0400,
Steve Nutt wrote:
Hi,

I think John is saying JAWS doesn't read automatically with it. Yes
you should still be able to read with the JAWS cursor though.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard
Weitzel
Sent: 23 June 2019 20:27
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I just opened Power Shell (Admin) from the Windows + X menu and typed
ipconfig to display my computer's IP configuration and I can read
this with the Jaws cursor.

----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John
Covici
Sent: Sunday, June 23, 2019 12:14 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I want to be able to use powershell, so I am not sure what you mean,
the only thing I see in properties (using powershell) is one checkbox
to toggle legacy console features. However, my problem appears in
both powershell and regular cmd.

On Sun, 23 Jun 2019 14:52:07 -0400,
Steve Nutt wrote:
You may have to set the command prompt to be legacy instead of using
PowerShell.

You can do this in CMD properties.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John
Covici
Sent: 22 June 2019 19:52
To: jfw@groups.io
Subject: jaws does not work properly in admin command window

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window,
I see the text, but other wise nothing -- jaws cursor reads nothing
as well. Tech support says its not supported, but that makes no
sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...














moderated Re: UIA?

inamuddin khan
 

Can anyone let me know that how to turn UIA on and off?

 

 

arguing with a woman is just like reading software’s lisence agreement.

At the end you ignore Her everything  and click I agree button.

You can contact me via gmail:

inamuddin09@...

outlook:

inam092@...

yahoo:

inamuddin2010@...

AOL:

charlsdarwin1969@...

Join me with my Skype ID:

charlsdarwin1

See me on facebook:

www.facebook.com/inamuddin786

Follow me on my twitter:

www.twitter.com/charlsdarwin1

Mobile phone:

+92-334-3348409

Google voice:

+1-631-5335683

 

 

From: Bill White
Sent: Tuesday, June 25, 2019 8:20 AM
To: main@jfw.groups.io
Subject: Re: UIA?

 

UIA (User Interface Automation is how JAWS receives and reports information

you may need to know, such as, when things change on the screen. If you turn

it off, most likely you will miss changes that you need to be aware of, as

well as notifications that may be annoying to you.

 

Bill White

billwhite92701@...

 

-----Original Message-----

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne

Sent: Monday, June 24, 2019 8:02 PM

To: main@jfw.groups.io

Subject: UIA?

 

What is the significance of UIA in Office 2016?  I turned it off, and

I no longer get the annoying "1 out of xx" messages when in a series

of instructions.  Will I lose other more important information by

leaving UIA unchecked?  What the heck is it, anyway?

 

Thx.

 

 

 

 

 

 

 

 

 

 

moderated Re: Jaws Not Speaking in MS Word

The Iowa Gal <iowagal728@...>
 

I wonder if a system restore might help your situation…

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Randy Meyer
Sent: Monday, June 24, 2019 8:47 PM
To: main@jfw.groups.io
Subject: Jaws Not Speaking in MS Word

 

Suddenly Jaws stopped working correctly in MS Word and now in Outlook as well.

 

It will not speak when moving by line, word, or character.  Insert down arrow does seem to read the document, but obviously I am not able to edit a document with it not speaking by line, word, or character.  I am running the latest version of Jaws and windows 10 pro.  I have had this happen occasionally in the past, but a restart of Jaws or the computer has always solved the issue until tonight.

 

Does anyone have any thoughts?

 

Randy Meyer

moderated Re: jaws does not work properly in admin command window

 

Please don't tell people to uninstall the video accessibility driver, that is very bad advice at this point especially if the accessibility display driver is checked in Settings. If that is the case and you uninstall the video display driver each time your system boots or Jaws restarts it will give you a message that the display driver is missing and while the system may mostly work fine, there are situations where it will not work correctly. I use software, for example, which works only if the accessibility display driver is enabled and in other situations it works better if it is disabled and I use the new so-called GDI or deep level hooking.
In any case, for most people who are just Jaws users and not terribly technically inclined this could have really bad consequences and they would then need tech support to help them fix the problem.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Munawar Bijani
Sent: Monday, June 24, 2019 6:39 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

Hi,

Ok, try getting rid of the Accessibility Driver. You can either turn it off in JAWS Settings Center or uninstall it completely from "Programs and Features".

On 6/24/2019 5:44 PM, John Covici wrote:
For me, the Jaws cursor does nothing in admin mode, it works fine in
regular mode.

On Mon, 24 Jun 2019 17:28:54 -0400,
Steve Nutt wrote:
Hi,

I think John is saying JAWS doesn't read automatically with it. Yes
you should still be able to read with the JAWS cursor though.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard
Weitzel
Sent: 23 June 2019 20:27
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I just opened Power Shell (Admin) from the Windows + X menu and typed
ipconfig to display my computer's IP configuration and I can read
this with the Jaws cursor.

----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John
Covici
Sent: Sunday, June 23, 2019 12:14 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I want to be able to use powershell, so I am not sure what you mean,
the only thing I see in properties (using powershell) is one checkbox
to toggle legacy console features. However, my problem appears in
both powershell and regular cmd.

On Sun, 23 Jun 2019 14:52:07 -0400,
Steve Nutt wrote:
You may have to set the command prompt to be legacy instead of using
PowerShell.

You can do this in CMD properties.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John
Covici
Sent: 22 June 2019 19:52
To: jfw@groups.io
Subject: jaws does not work properly in admin command window

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window,
I see the text, but other wise nothing -- jaws cursor reads nothing
as well. Tech support says its not supported, but that makes no
sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...










moderated Re: UIA?

Bill White
 

UIA (User Interface Automation is how JAWS receives and reports information
you may need to know, such as, when things change on the screen. If you turn
it off, most likely you will miss changes that you need to be aware of, as
well as notifications that may be annoying to you.

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Monday, June 24, 2019 8:02 PM
To: main@jfw.groups.io
Subject: UIA?

What is the significance of UIA in Office 2016? I turned it off, and
I no longer get the annoying "1 out of xx" messages when in a series
of instructions. Will I lose other more important information by
leaving UIA unchecked? What the heck is it, anyway?

Thx.

moderated UIA?

Ann Byrne
 

What is the significance of UIA in Office 2016? I turned it off, and I no longer get the annoying "1 out of xx" messages when in a series of instructions. Will I lose other more important information by leaving UIA unchecked? What the heck is it, anyway?

Thx.

moderated Jaws Not Speaking in MS Word

Randy Meyer
 

Suddenly Jaws stopped working correctly in MS Word and now in Outlook as well.

 

It will not speak when moving by line, word, or character.  Insert down arrow does seem to read the document, but obviously I am not able to edit a document with it not speaking by line, word, or character.  I am running the latest version of Jaws and windows 10 pro.  I have had this happen occasionally in the past, but a restart of Jaws or the computer has always solved the issue until tonight.

 

Does anyone have any thoughts?

 

Randy Meyer

moderated Re: jaws does not work properly in admin command window

Munawar Bijani <munawarb@...>
 

Hi,

Ok, try getting rid of the Accessibility Driver. You can either turn it off in JAWS Settings Center or uninstall it completely from "Programs and Features".

On 6/24/2019 5:44 PM, John Covici wrote:
For me, the Jaws cursor does nothing in admin mode, it works fine in
regular mode.

On Mon, 24 Jun 2019 17:28:54 -0400,
Steve Nutt wrote:
Hi,

I think John is saying JAWS doesn't read automatically with it. Yes you
should still be able to read with the JAWS cursor though.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: 23 June 2019 20:27
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I just opened Power Shell (Admin) from the Windows + X menu and typed
ipconfig to display my computer's IP configuration and I can read this with
the Jaws cursor.

----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Sunday, June 23, 2019 12:14 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I want to be able to use powershell, so I am not sure what you mean, the
only thing I see in properties (using powershell) is one checkbox to toggle
legacy console features. However, my problem appears in both powershell and
regular cmd.

On Sun, 23 Jun 2019 14:52:07 -0400,
Steve Nutt wrote:
You may have to set the command prompt to be legacy instead of using
PowerShell.

You can do this in CMD properties.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: 22 June 2019 19:52
To: jfw@groups.io
Subject: jaws does not work properly in admin command window

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window, I
see the text, but other wise nothing -- jaws cursor reads nothing as
well. Tech support says its not supported, but that makes no sense to
me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...










moderated Re: jaws does not work properly in admin command window

John Covici
 

For me, the Jaws cursor does nothing in admin mode, it works fine in
regular mode.

On Mon, 24 Jun 2019 17:28:54 -0400,
Steve Nutt wrote:

Hi,

I think John is saying JAWS doesn't read automatically with it. Yes you
should still be able to read with the JAWS cursor though.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: 23 June 2019 20:27
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I just opened Power Shell (Admin) from the Windows + X menu and typed
ipconfig to display my computer's IP configuration and I can read this with
the Jaws cursor.

----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Sunday, June 23, 2019 12:14 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I want to be able to use powershell, so I am not sure what you mean, the
only thing I see in properties (using powershell) is one checkbox to toggle
legacy console features. However, my problem appears in both powershell and
regular cmd.

On Sun, 23 Jun 2019 14:52:07 -0400,
Steve Nutt wrote:

You may have to set the command prompt to be legacy instead of using
PowerShell.

You can do this in CMD properties.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: 22 June 2019 19:52
To: jfw@groups.io
Subject: jaws does not work properly in admin command window

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window, I
see the text, but other wise nothing -- jaws cursor reads nothing as
well. Tech support says its not supported, but that makes no sense to
me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...










--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...

moderated Re: jaws does not work properly in admin command window

Steve Nutt
 

Hi,

If it's long, just write it to a file.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: 23 June 2019 21:30
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

It will, but you might not want to listen to it like that, especially if the output is long. I know I don't. The JAWS cursor gives finer control over the output.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Munawar Bijani
Sent: June 23, 2019 4:17 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

You shouldn't have to use the JAWS Cursor; JAWS will read it automatically.

On 6/23/2019 3:27 PM, Sieghard Weitzel wrote:
I just opened Power Shell (Admin) from the Windows + X menu and typed ipconfig to display my computer's IP configuration and I can read this with the Jaws cursor.

----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Sunday, June 23, 2019 12:14 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I want to be able to use powershell, so I am not sure what you mean, the only thing I see in properties (using powershell) is one checkbox to toggle legacy console features. However, my problem appears in both powershell and regular cmd.

On Sun, 23 Jun 2019 14:52:07 -0400,
Steve Nutt wrote:
You may have to set the command prompt to be legacy instead of using
PowerShell.

You can do this in CMD properties.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John
Covici
Sent: 22 June 2019 19:52
To: jfw@groups.io
Subject: jaws does not work properly in admin command window

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window,
I see the text, but other wise nothing -- jaws cursor reads nothing
as well. Tech support says its not supported, but that makes no
sense to me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...





moderated Re: jaws does not work properly in admin command window

Steve Nutt
 

Hi,

I think John is saying JAWS doesn't read automatically with it. Yes you
should still be able to read with the JAWS cursor though.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: 23 June 2019 20:27
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I just opened Power Shell (Admin) from the Windows + X menu and typed
ipconfig to display my computer's IP configuration and I can read this with
the Jaws cursor.

----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Sunday, June 23, 2019 12:14 PM
To: main@jfw.groups.io
Subject: Re: jaws does not work properly in admin command window

I want to be able to use powershell, so I am not sure what you mean, the
only thing I see in properties (using powershell) is one checkbox to toggle
legacy console features. However, my problem appears in both powershell and
regular cmd.

On Sun, 23 Jun 2019 14:52:07 -0400,
Steve Nutt wrote:

You may have to set the command prompt to be legacy instead of using
PowerShell.

You can do this in CMD properties.

All the best

Steve

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: 22 June 2019 19:52
To: jfw@groups.io
Subject: jaws does not work properly in admin command window

Hi. At least with version 1809, jfw will not read anything in the
command window if run as administrator. If I virtualize the window, I
see the text, but other wise nothing -- jaws cursor reads nothing as
well. Tech support says its not supported, but that makes no sense to
me and Narrator reads it fine.

Thanks in advance for any suggestions.

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...







--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...