main@jfw.groups.io

safety first

Dorothy <dorothy.ingram-gorban@...>

#2402

I hope jjames will forgive me but some of you  may be seeking safety, and
just to say we are thinking of you. Do not worry about Jaws, Doctor jaws
will look after him. take care of yourselves.  Here in uk it is  the usual
wet  Bank holiday august weekend regards  dorothy.

Re: boot into safe mode using jaws

Dorothy <dorothy.ingram-gorban@...>

#2401

I have  read this with interest, since it is not the safe mode thatMs
outlook suggests if it is not turned off,just so and complains when next
the desktop is put on and suggest it run in safe mode. However  since I
mentioned a while ago when my xp desktop seemingly died downloading jaws
and I called out a local engineer who said jaws 11 may have hit a poor patch
on the Hd, letme custom make you a windows 7,as it was newly out I did have
an external back up so he knew I had material stored off computer. Well a
couple of people I know said"he could have tried to repair it in safe mode",
so in that kind of safe mode how would he have gone   about fixing my xp
desktop the easy thing of course was to say he could custom make me a
windows 7 pc  for an astronomical price   thanks dorothy

Show quoted text

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of 2.g.i
Sent: 28 August 2011 22:49
To: jfw@lists.the-jdh.com
Subject: boot into safe mode using jaws

Hi every one

Please read all of this before carrying out the  steps.

To save the guessing of when to hit f8 & so on to boot into safe 
mode, you can do the following.
press windows r to open the run box
in the run box type, msconfig & press enter
the system configuration window will open
either shift tab once to get up into the tabs & use the right arrow,
or use control tab & find the boot tab
its called the Boot tab in windows 7, boot.ini tab in xp
once on the boot tab, start tabbing through the options & you will find
boot option Safe boot, you need to check this
then tab once more & you will find radio buttons
use the arrow keys to choose either minimal or network
again dont forget, if you choose network, while you are connected to 
the internet you have no securety running.
now just tab to the ok button & hit the space bar.
on xp you will get a window saying need to restart, on windows 7 you 
will not recieve this & need to restart the system yourself.
On xp when the system boots into safe mode you will here the windows 
log on sound & then you will hear a ding sound,
the ding is a window stating you are in safe mode, just press enter to say
ok.
You will not get this ding sound in windows 7.
dont forget things in safe mode are a lot slower, so wait a while for 
the desktop & so on to load before you try to start your screen reader.
In xp when you get your screen reader running you may find a system 
configuration window saying, is in selective mode & so on, I normally 
tab to never show this again & check it, then tab to ok
Once you are finished doing what you want to in safe mode, you need 
to go back into msconfig into the boot tab & uncheck boot into safe mode.
If you dont do this, you will just keep starting up in safe mode.

Hope this helps....

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

tagging friends in facebook posts

Nickus de Vos <bigboy529@...>

#2400

Hi some of you might know that it's possible to add a friend as a link
in a facebook post. The way it works is to place the @ sign in front
of a persons name e.g. @peeter Smith, almost the same as on twitter
but then it opens a drop down menu to show you the person you
mentioned and you must click on the name in the list. Have any of you
tryed this with jaws, and how do you click the name in the list? I
mostly use m.facebook.com even on my pc because it's most accessible
with jaws but have tryed both sites and can't click the name in the
drop down menu.

Add-on to unclutter websites?

Robbie

#2399

Hi! does anyone know of an add-on for Firefox that cleans out these
infernal Google ads and all the Facebook and Twitter widgets? It's
exasperating to have to navigate through all that stuff just to read the
second half of an article or even get to the article in the first place.
I'D be grateful for any suggestions.
Thanks, Robbie

Re: JFW help with eudora 7

inthane <inthaneelf@...>

#2396

do you mean things like this:
From: "Mike & Barbara In Arcadia" <mb69mach1@charter.net>
To: "Jaws-Users List" <jaws-users-list@jaws-users.com>
Subject: [JAWS-Users] Jaws Accessible SuperAnti Spyware Download Links
Date: Friday, August 12, 2011 11:07 AM"

and the persistence of the > than sign in the heart of the saved message?

if so you need a "Email stripper" similar to those set up for windows XP by folks.

there are a couple geared to working with the XP grade Email clients to be found on:
www.jfwlite.com/programs

and probably a lot more of them for the later made clients on the web, especially at places like:
www.downloads.com

HTH,
elf

. Moderator, Blind Access Help.
. Owner: Alacorn Computer Enterprises
"own the might and majesty of an alacorn"
www.alacorncomputer.com
. proprietor: Inthane's Grab Bag
for blind computer users and Programmers!
http://grabbag.alacorncomputer.com

Show quoted text

----- Original Message ----- 
From: "2.g.i" <2.g.i.84972@gmail.com>
To: <jfw@lists.the-jdh.com>
Sent: Saturday, August 27, 2011 1:56 PM
Subject: JFW help with eudora 7

Hi all,
I am new to using Eudora, Just 3 days old.
Can some one please help with how to remove the headers from the top of received emails?
Using Eudora 7.1.0.9

Thanks in advance for any help.

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: JFW help with eudora 7

2.g.i <2.g.i.84972@...>

#2383

Thats great, thank you

Show quoted text

At 10:46 PM 8/26/2011, you wrote:
Go to Tools, Options, and arrow down to Content Concentrator, the 30th category in the list.  Tab to "Single Message Profile, Message Window" and change it to "compact".

Chris
At 04:56 PM 8/27/2011, you wrote:
Hi all,
I am new to using Eudora, Just 3 days old.
Can some one please help with how to remove the headers from the top of  received emails?
Using Eudora 7.1.0.9

Thanks in advance for any help.





_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: JFW help with eudora 7

2.g.i <2.g.i.84972@...>

#2382

Thats great, thank you for that.

Show quoted text

At 10:42 PM 8/26/2011, you wrote:
ooops,, the first link had an s in the word option and was incorrect, here are the links again. just click on the first line that starts with <x-Eudora and follow the prompts.

here you go, the first link below will turn off the unnecessary headers and the second link will put them back. you will have to restart eudora for the changes to take effect.

hmmm, here's how to do it using the eudora options links:

turn on the taboo headers (that is remove unnecessary headers)

<X-Eudora-Option:TabooHeaders="A,B,C,Co,DK,DE,Di,Do,E,G,H,I,J,K,L,M,N,O,P,Q,Re,Se,Th,U,V,X-,Y,Z">
you must restart eudora for the change to take effect.

and to get the headers back:

<X-Eudora-Option:TabooHeaders="">

and of course eudora must be restarted. hope this helps.

Legend has it that on Saturday 8/27/2011 03:56 PM, 2.g.i said:
Hi all,
I am new to using Eudora, Just 3 days old.
Can some one please help with how to remove the headers from the top of  received emails?
Using Eudora 7.1.0.9

Thanks in advance for any help.

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
check out my sendspace offerings at:
http://www.sendspace.com/folder/i7xwg4

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Add Suggested Sites to your Favorites Bar

Robert Logue <bobcat11@...>

#2395

I find the
Favorites Barin IE 8 hard to use with Jaws.  What might happen if I did this?

Add Suggested Sites to your Favorites Bar.

Bob

JFW help with eudora 7

2.g.i <2.g.i.84972@...>

#2376

Hi all,
I am new to using Eudora, Just 3 days old.
Can some one please help with how to remove the headers from the top of  received emails?
Using Eudora 7.1.0.9

Thanks in advance for any help.

Outlook 2007 Calendar and JAWS

Charlie Macdonald <charlie.mac@...>

#2394

Greetings: I've just started to use Outlook 2007 at work and having some
difficulty getting the calendar view set ...  are there any suggested
settings for Outlook to make the calendar more responsive to JAWS .. For
example with view set to "week" I cannot move day to day with the right
arrow although to a sighted person using the right arrow does advance the
calendar but JAWS is stuck on the current day .. I called FS help desk and
the fellow on the desk had the same problem but could not help me.
I'm using the latest version of Jaws 12 and it's a vista operating system
... 
Many thanks for any suggestions,
Regards,
Charlie.

Re: jaws 12 and focus blue

Milton Ota <mota@...>

#2393

You might want to consider signing up for the free webinar being hosted by
Freedom Scientific on using the Focus Blu Braille display scheduled for
September 22 and 29. You will need to register separately for the two dates
and the webinar is FREE.

Go to the following:
http://www.freedomscientific.com/training/

Show quoted text

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Oscar Corella
Sent: Saturday, August 27, 2011 8:40 AM
To: jfw@lists.the-jdh.com
Subject: jaws 12 and focus blue

Hi does anyone have a resource on learning the jaws commands on the focus
blue keyboard that does a better job then the jaws documentation?  

I cant seem to be able to follow the explination that jaws provides in the
help files.  

It just does not make sense.

Thanks and sorry for the vague question.

Oscar

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
27/6646ecb2/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: Need refresher on how to configure varous voices in Jaws 12withWindows 7

Marquette, Ed <Ed.Marquette@...>

#2392

Having just had my laptop "upgraded" to Windows 7, I'm in the same boat as is Tom.
I think, actually, there are two routes, with variations along the way.
You can create separate voice profiles indeed.  Different profiles can employ different synthesizers.  I now have a profile for Eloquence and one for Samantha of the Solo RealSpeak voices.
In addition, however, you can create a different voice scheme.  I've done this principally by modifying and renaming schemes Freedom Scientific provides by default.
JAWS key plus alt plus S will get into the voice schemes.  Here, you can set different voices for different items, including bold and so on.
Under the voice alias setting, you can create your own custom voice, combining one of the named voices with your own pitch and so on.

Show quoted text

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Adrian Spratt
Sent: Saturday, August 27, 2011 12:51 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Need refresher on how to configure varous voices in Jaws 12withWindows 7

I haven't done this in a while, but following Steve's directions, you would
create a separate profile for each combination you want. After completing
this task, you switch between profiles by pressing insert-control-s. 

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Steve
Sent: Saturday, August 27, 2011 12:20 PM
To: The Jaws for Windows support list.
Subject: Re: Need refresher on how to configure varous voices in Jaws
12withWindows 7

Tom,

Insert-J for jaws menu, o for options, v for voices.
----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Saturday, August 27, 2011 12:13 PM
Subject: Need refresher on how to configure varous voices in Jaws 12
withWindows 7

Hi, all.

I'm configuring Jaws on my new Windows 7 laptop, and can't recall how 
to configure various voices for reading plain text, messages and 
tutorials, etc..

I want to get to the voices like Paul,Rocco, Sandy, Grampa, etc.

Can anyone give me a quick set of steps to do this?

Thanks!

Tom in Michigan

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
#############################################################################################################
ANY FEDERAL TAX ADVICE CONTAINED IN THIS MESSAGE SHOULD NOT BE USED OR REFERRED TO IN THE PROMOTING, MARKETING OR 
RECOMMENDING OF ANY ENTITY, INVESTMENT PLAN OR ARRANGEMENT, AND SUCH ADVICE IS NOT INTENDED OR WRITTEN TO BE USED, 
AND CANNOT BE USED, BY A TAXPAYER FOR THE PURPOSE OF AVOIDING PENALTIES UNDER THE INTERNAL REVENUE CODE. 
#############################################################################################################
This E-mail message is confidential, is intended only for the named recipient(s) above and may contain information 
that is privileged, attorney work product or otherwise protected by applicable law. If you have received this 
message in error, please notify the sender at 402-346-6000 and delete this E-mail message. 
Thank you.
#############################################################################################################

jaws 12 and focus blue

Oscar Corella <oscarcorella5@...>

#2391

Hi does anyone have a resource on learning the jaws commands on the focus
blue keyboard that does a better job then the jaws documentation?  

I cant seem to be able to follow the explination that jaws provides in the
help files.  

It just does not make sense.

Thanks and sorry for the vague question.

Oscar

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110827/6646ecb2/attachment.html>

Re: Need refresher on how to configure varous voices in Jaws12withWindows 7

Tom Behler

#2390

Ok, Adrian.

Looks like I'm all set now.

Tom from Michigan

Show quoted text

----- Original Message ----- 
From: "Adrian Spratt" <Adrian@AdrianSpratt.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Saturday, August 27, 2011 1:50 PM
Subject: RE: Need refresher on how to configure varous voices in Jaws12withWindows 7


I haven't done this in a while, but following Steve's directions, you would
create a separate profile for each combination you want. After completing
this task, you switch between profiles by pressing insert-control-s.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Steve
Sent: Saturday, August 27, 2011 12:20 PM
To: The Jaws for Windows support list.
Subject: Re: Need refresher on how to configure varous voices in Jaws
12withWindows 7

Tom,

Insert-J for jaws menu, o for options, v for voices.
----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Saturday, August 27, 2011 12:13 PM
Subject: Need refresher on how to configure varous voices in Jaws 12
withWindows 7


Hi, all.

I'm configuring Jaws on my new Windows 7 laptop, and can't recall how
to configure various voices for reading plain text, messages and
tutorials, etc..

I want to get to the voices like Paul,Rocco, Sandy, Grampa, etc.

Can anyone give me a quick set of steps to do this?

Thanks!

Tom in Michigan



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: Need refresher on how to configure varous voices in Jaws 12withWindows 7

Tom Behler

#2389

Thanks, Steve.

I was almost there, but just didn't tab over far enough.

Tom from Michigan

Show quoted text

----- Original Message ----- 
From: "Steve" <k8sp@sbcglobal.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Saturday, August 27, 2011 12:20 PM
Subject: Re: Need refresher on how to configure varous voices in Jaws 12withWindows 7


Tom,

Insert-J for jaws menu, o for options, v for voices.
----- Original Message ----- 
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Saturday, August 27, 2011 12:13 PM
Subject: Need refresher on how to configure varous voices in Jaws 12 withWindows 7


Hi, all.

I'm configuring Jaws on my new Windows 7 laptop, and can't recall how to configure various voices for reading plain text, messages and tutorials, etc..

I want to get to the voices like Paul,Rocco, Sandy, Grampa, etc.

Can anyone give me a quick set of steps to do this?

Thanks!

Tom in Michigan



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: Need refresher on how to configure varous voices in Jaws 12withWindows 7

Adrian Spratt

#2388

I haven't done this in a while, but following Steve's directions, you would
create a separate profile for each combination you want. After completing
this task, you switch between profiles by pressing insert-control-s.

Show quoted text

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Steve
Sent: Saturday, August 27, 2011 12:20 PM
To: The Jaws for Windows support list.
Subject: Re: Need refresher on how to configure varous voices in Jaws
12withWindows 7

Tom,

Insert-J for jaws menu, o for options, v for voices.
----- Original Message -----
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Saturday, August 27, 2011 12:13 PM
Subject: Need refresher on how to configure varous voices in Jaws 12
withWindows 7


Hi, all.

I'm configuring Jaws on my new Windows 7 laptop, and can't recall how 
to configure various voices for reading plain text, messages and 
tutorials, etc..

I want to get to the voices like Paul,Rocco, Sandy, Grampa, etc.

Can anyone give me a quick set of steps to do this?

Thanks!

Tom in Michigan



_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: Need refresher on how to configure varous voices in Jaws 12 withWindows 7

Steve <k8sp@...>

#2387

Tom,

Insert-J for jaws menu, o for options, v for voices.

Show quoted text

----- Original Message ----- 
From: "Tom Behler" <tombehler@gmail.com>
To: "Jaws users e-mail list" <jfw@lists.the-jdh.com>
Sent: Saturday, August 27, 2011 12:13 PM
Subject: Need refresher on how to configure varous voices in Jaws 12 withWindows 7

Hi, all.

I'm configuring Jaws on my new Windows 7 laptop, and can't recall how to configure various voices for reading plain text, messages and tutorials, etc..

I want to get to the voices like Paul,Rocco, Sandy, Grampa, etc.

Can anyone give me a quick set of steps to do this?

Thanks!

Tom in Michigan

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Need refresher on how to configure varous voices in Jaws 12 with Windows 7

Tom Behler

#2386

Hi, all.

I'm configuring Jaws on my new Windows 7 laptop, and can't recall how to configure various voices for reading plain text, messages and tutorials, etc..

I want to get to the voices like Paul,Rocco, Sandy, Grampa, etc.

Can anyone give me a quick set of steps to do this?

Thanks!

Tom in Michigan

Re: JFW help with eudora 7

northstar1950@...

#2385

you are quite welcome.


Legend has it that on Saturday 8/27/2011 08:48 PM, 2.g.i said:
Thats great, thank you for that.



At 10:42 PM 8/26/2011, you wrote:
ooops,, the first link had an s in the word option and was incorrect, here are the links again. just click on the first line that starts with <x-Eudora and follow the prompts.

here you go, the first link below will turn off the unnecessary headers and the second link will put them back. you will have to restart eudora for the changes to take effect.

hmmm, here's how to do it using the eudora options links:

turn on the taboo headers (that is remove unnecessary headers)

<X-Eudora-Option:TabooHeaders="A,B,C,Co,DK,DE,Di,Do,E,G,H,I,J,K,L,M,N,O,P,Q,Re,Se,Th,U,V,X-,Y,Z">
you must restart eudora for the change to take effect.

and to get the headers back:

<X-Eudora-Option:TabooHeaders="">

and of course eudora must be restarted. hope this helps.




Legend has it that on Saturday 8/27/2011 03:56 PM, 2.g.i said:
Hi all,
I am new to using Eudora, Just 3 days old.
Can some one please help with how to remove the headers from the top of  received emails?
Using Eudora 7.1.0.9

Thanks in advance for any help.





_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
check out my sendspace offerings at:
http://www.sendspace.com/folder/i7xwg4


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
check out my sendspace offerings at:
http://www.sendspace.com/folder/i7xwg4

Re: Extracting text from powerpoint presentation

Tom Behler

#2384

Thanks, Bill.

I have been playing around with the RTF option, but haven't found things to be terribly clean.

Will try the PDF strategy here when I get the chance.

I appreciate everyone's input on this.

Tom Behler in Michigan

Show quoted text

----- Original Message ----- 
From: "Bill Spiry" <b.s.spiry@gmail.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Saturday, August 27, 2011 1:14 AM
Subject: RE: Extracting text from powerpoint presentation

Depends. If the presentation has an outline or presentor notes, those can be
saved as a text file or rtf from within ppt. I usually find it most
effective to go to File/save as/ and select PDF as the file type. This will
save the text and other stuff out to a pdf file which is readable with jaws
or you can then use a conversion application to convert the pdf to word. I
find it interesting that office doesn't provide for a cleaner conversion of
a ppt to a .doc or .rtf. there is an option to save as word but this keeps
the thing in slide form that is cumbersome with JAWS.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Tom Behler
Sent: Friday, August 26, 2011 4:10 AM
To: Jaws users e-mail list
Subject: Extracting text from powerpoint presentation

Hi, everyone.

Can someone tell me the easiest way to extract and save the text from the
slides in a powerpoint presentation?

I have a powerpoint presentation here from work, and all I need is the text
content for future reference.

As best as I can tell, the presentation is done in Office 2007 powerpoint
format.

Thanks!

Tom Behler in Michigan

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com