Date   

Re: JFW 12 and Adobe Reader 10.1

Bergen, Eric <Eric.Bergen@...>
 

Hi.
I am not sure if this will make a difference but try this.
Go to your start menu and open Adobe Reader.
Go to your edit menu and click on preferences.
Find General in the list and hit tab.
Keep tabbing until you find enable protected mode at startup and make sure it is unchecked.
Tab to ok and hit enter.
This is what I did and I was able to read PDF documents after that.
As long as it is not a scanned document. In this case you will need OCR.
Hope this helps.
Eric.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Sharon Clark
Sent: Monday, December 19, 2011 3:17 PM
To: jfw@lists.the-jdh.com
Subject: JFW 12 and Adobe Reader 10.1

Hello,



I have a student who's attempting to open PDF documents found through EBSCOhost to read using Adobe Reader 10.1. When the article is opened; however, JAWS cannot read anything. We were able to read the document with Read Out Loud. Is there a setting that needs to be changed to allow JAWS to read the document? Your assistance is greatly appreciated concerning this matter.



Sharon

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/df98a426/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JFW 12 and Adobe Reader 10.1

Sharon Clark
 

That was my feeling as well. That's why it's mind boggling that Read Out
Loud can read it while JFW cannot. JFW is not saying that the document is
empty it says blank as one is arrowing through the document.

Sharon

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Marquette, Ed
Sent: Monday, December 19, 2011 4:36 PM
To: The Jaws for Windows support list.
Subject: RE: JFW 12 and Adobe Reader 10.1

OK.
What is Read Out Loud? Someone has to do optical character recognition on a
scanned picture of a document. I should think that, unless Read Out Loud,
has built-in OCR capabilities, it would be as useless on scanned documents
as JAWS is.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Rouillardmike@aol.com
Sent: Monday, December 19, 2011 3:23 PM
To: jfw@lists.the-jdh.com
Subject: Re: JFW 12 and Adobe Reader 10.1

This happens when the pdf is a scanned document. Jaws will say the document
is empty because it is only a picture and adobe reader doesn't have OCR.
This issue can either be resolved by reading the document in read out loud
or upgrading to jaws 13.
Mike



In a message dated 12/19/2011 4:19:10 P.M. Eastern Standard Time,
sharonjackson03@comcast.net writes:

Hello,



I have a student who's attempting to open PDF documents found through
EBSCOhost to read using Adobe Reader 10.1. When the article is opened;
however, JAWS cannot read anything. We were able to read the document with
Read Out Loud. Is there a setting that needs to be changed to allow JAWS
to read the document? Your assistance is greatly appreciated concerning
this matter.



Sharon

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201112
19/df98a426/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201112
19/868640a9/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
############################################################################
#################################
ANY FEDERAL TAX ADVICE CONTAINED IN THIS MESSAGE SHOULD NOT BE USED OR
REFERRED TO IN THE PROMOTING, MARKETING OR
RECOMMENDING OF ANY ENTITY, INVESTMENT PLAN OR ARRANGEMENT, AND SUCH ADVICE
IS NOT INTENDED OR WRITTEN TO BE USED,
AND CANNOT BE USED, BY A TAXPAYER FOR THE PURPOSE OF AVOIDING PENALTIES
UNDER THE INTERNAL REVENUE CODE.
############################################################################
#################################
This E-mail message is confidential, is intended only for the named
recipient(s) above and may contain information
that is privileged, attorney work product or otherwise protected by
applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this
E-mail message.
Thank you.
############################################################################
#################################

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JFW 12 and Adobe Reader 10.1

Marquette, Ed <Ed.Marquette@...>
 

OK.
What is Read Out Loud? Someone has to do optical character recognition on a scanned picture of a document. I should think that, unless Read Out Loud, has built-in OCR capabilities, it would be as useless on scanned documents as JAWS is.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Rouillardmike@aol.com
Sent: Monday, December 19, 2011 3:23 PM
To: jfw@lists.the-jdh.com
Subject: Re: JFW 12 and Adobe Reader 10.1

This happens when the pdf is a scanned document. Jaws will say the document
is empty because it is only a picture and adobe reader doesn't have OCR.
This issue can either be resolved by reading the document in read out loud
or upgrading to jaws 13.
Mike



In a message dated 12/19/2011 4:19:10 P.M. Eastern Standard Time,
sharonjackson03@comcast.net writes:

Hello,



I have a student who's attempting to open PDF documents found through
EBSCOhost to read using Adobe Reader 10.1. When the article is opened;
however, JAWS cannot read anything. We were able to read the document with
Read Out Loud. Is there a setting that needs to be changed to allow JAWS
to
read the document? Your assistance is greatly appreciated concerning this
matter.



Sharon

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/df98a426/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/868640a9/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
#############################################################################################################
ANY FEDERAL TAX ADVICE CONTAINED IN THIS MESSAGE SHOULD NOT BE USED OR REFERRED TO IN THE PROMOTING, MARKETING OR
RECOMMENDING OF ANY ENTITY, INVESTMENT PLAN OR ARRANGEMENT, AND SUCH ADVICE IS NOT INTENDED OR WRITTEN TO BE USED,
AND CANNOT BE USED, BY A TAXPAYER FOR THE PURPOSE OF AVOIDING PENALTIES UNDER THE INTERNAL REVENUE CODE.
#############################################################################################################
This E-mail message is confidential, is intended only for the named recipient(s) above and may contain information
that is privileged, attorney work product or otherwise protected by applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this E-mail message.
Thank you.
#############################################################################################################


Re: [Bulk] JFW 12 and Adobe Reader 10.1

Dave...
 

Sharon,

In response to one posting recommending upgrading to JAWS 13 I would caution
that the convenient OCR feature in JAWS 13 is not a full-blown document OCR
program for converting multiple pages -- it's good for a single page to
understand what's there, but that's about it.

Better to stick to the JAWS 12 and if available spend money on a standalone
OCR program like OmniPage, Openbook, or Kurzweil.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Sharon Clark" <sharonjackson03@comcast.net>
To: <jfw@lists.the-jdh.com>
Sent: Monday, December 19, 2011 13:17
Subject: [Bulk] JFW 12 and Adobe Reader 10.1


Hello,



I have a student who's attempting to open PDF documents found through
EBSCOhost to read using Adobe Reader 10.1. When the article is opened;
however, JAWS cannot read anything. We were able to read the document with
Read Out Loud. Is there a setting that needs to be changed to allow JAWS to
read the document? Your assistance is greatly appreciated concerning this
matter.



Sharon

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/df98a426/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: JFW 12 and Adobe Reader 10.1

Chris Smart <csmart8@...>
 

Whoops, I missed JFW 12 in the subject line. Ignore the bit I said about Jaws 13 then.
You need to run the pdf through OCR software to get text out of the page images.
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING! Clear True Sound: www.ctsmastering.com --

Always have your stuff when you need it with @Dropbox. Seamlessly share with your friends and colleagues. 2GB account is free! http://db.tt/bQ2GuIt


Re: JFW 12 and Adobe Reader 10.1

Rouillardmike@...
 

This happens when the pdf is a scanned document. Jaws will say the document
is empty because it is only a picture and adobe reader doesn't have OCR.
This issue can either be resolved by reading the document in read out loud
or upgrading to jaws 13.
Mike

In a message dated 12/19/2011 4:19:10 P.M. Eastern Standard Time,
sharonjackson03@comcast.net writes:

Hello,



I have a student who's attempting to open PDF documents found through
EBSCOhost to read using Adobe Reader 10.1. When the article is opened;
however, JAWS cannot read anything. We were able to read the document with
Read Out Loud. Is there a setting that needs to be changed to allow JAWS
to
read the document? Your assistance is greatly appreciated concerning this
matter.



Sharon

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/df98a426/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/868640a9/attachment.html>


Re: JFW 12 and Adobe Reader 10.1

Chris Smart <csmart8@...>
 

have you tried Jaws 13's Convenient OCR feature? Or, running the file through K1000, Openbook, or any third-party OCR package like Omnipage, FineReader, Textbridge, etc.?

If the pages are just images, pictures of text, not actual readable text (I know they look the same to your eye but they are not the same to the computer), you will need to run the file through OCR software to render readable text from the images.

Chris
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING! Clear True Sound: www.ctsmastering.com --

Always have your stuff when you need it with @Dropbox. Seamlessly share with your friends and colleagues. 2GB account is free! http://db.tt/bQ2GuIt


JFW 12 and Adobe Reader 10.1

Sharon Clark
 

Hello,



I have a student who's attempting to open PDF documents found through
EBSCOhost to read using Adobe Reader 10.1. When the article is opened;
however, JAWS cannot read anything. We were able to read the document with
Read Out Loud. Is there a setting that needs to be changed to allow JAWS to
read the document? Your assistance is greatly appreciated concerning this
matter.



Sharon

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/df98a426/attachment.html>


Re: reexplaining Outlook07 and finding next text stream

Dave...
 

Adrian,

Unfortunately There's no edit menu in Outlook 2007 so those common-sense
easy-to-use features are buried and apparently not utilized.

Ctrl+Shift+F now brings up the find dialog as I described before, with the
necessary expedient to use the Find Next button (Alt+F) to search again.

Ed's suggestion of F4 and Shift+F4 works perfectly, and is also used as
find/findNext in Excel and Word, so at least MS has become a bit more
consistent across their Office platform.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Adrian Spratt" <Adrian@AdrianSpratt.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Monday, December 19, 2011 10:24
Subject: RE: reexplaining Outlook07 and finding next text stream


Have you checked the edit menu? I realize the find next function has either
changed or been lost since Outlook 2003, which I'm still using, but I see in
this edit menu the shortcuts for find and find next, along with ways you can
delimit searches.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Gerardo Corripio
Sent: Monday, December 19, 2011 12:50 PM
To: 'The Jaws for Windows support list.'
Subject: reexplaining Outlook07 and finding next text stream

HI guys: Thanks for such great ideas on searching for next stream in
Outlook07! But let me reexplain how I use it hoping more ideas might come:
Suppose in a certain email I'd like to skip article via article or section
via section; each article or section is separated via a string of dashes,
asteris, number signs or other symbols. In Outlook Express I used to invoke
the Jaws Find dialogue via Insert+Control+f, set the dialogue to search for
the determined string, being safe to press Escape on finding the first
occurrence. When reading the section and wanting to go to the next one, I'd

do Insert+f3 and without having to reinvoke the Search command it'd put me
on the next occurrence of the string, thus being able to jump to the next
article or section without having to reenter the Find dialogue.

OK I'm wanting to accomplish the same in Outlook07 emails: I do
Insert+Control+f to invoke Outlook07's Find and search for the string
Insert+Control+once I
know what it uses to separate articles or sections; I read the first article
or section, and wanting to search for the next occurrence, I have to reenter
the Find dialogue with Insert+Control+f and do Enter on next; logic would
have it that via the Control+page up or page down like in Word, it'll find
the next occurrence, thus making it easier to read; yes sighted people can
click on the ribbon and click on the Find Next icon, but how would we do
this same task as Jaws users?

So my question is there another way to accomplish this task as I used to do
before with Outlook Express? Hope now we're on the same track having
explained in more detail my situation.

Thanks in advanced for any other great ideas! Lists like these really help a
lot to be able to use more efficiently our technologies!

Gerardo

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201112
19/e115aad5/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: reexplaining Outlook07 and finding next text stream

Adrian Spratt
 

Have you checked the edit menu? I realize the find next function has either
changed or been lost since Outlook 2003, which I'm still using, but I see in
this edit menu the shortcuts for find and find next, along with ways you can
delimit searches.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Gerardo Corripio
Sent: Monday, December 19, 2011 12:50 PM
To: 'The Jaws for Windows support list.'
Subject: reexplaining Outlook07 and finding next text stream

HI guys: Thanks for such great ideas on searching for next stream in
Outlook07! But let me reexplain how I use it hoping more ideas might come:
Suppose in a certain email I'd like to skip article via article or section
via section; each article or section is separated via a string of dashes,
asteris, number signs or other symbols. In Outlook Express I used to invoke
the Jaws Find dialogue via Insert+Control+f, set the dialogue to search for
the determined string, being safe to press Escape on finding the first
occurrence. When reading the section and wanting to go to the next one, I'd

do Insert+f3 and without having to reinvoke the Search command it'd put me
on the next occurrence of the string, thus being able to jump to the next
article or section without having to reenter the Find dialogue.

OK I'm wanting to accomplish the same in Outlook07 emails: I do
Insert+Control+f to invoke Outlook07's Find and search for the string
Insert+Control+once I
know what it uses to separate articles or sections; I read the first article
or section, and wanting to search for the next occurrence, I have to reenter
the Find dialogue with Insert+Control+f and do Enter on next; logic would
have it that via the Control+page up or page down like in Word, it'll find
the next occurrence, thus making it easier to read; yes sighted people can
click on the ribbon and click on the Find Next icon, but how would we do
this same task as Jaws users?

So my question is there another way to accomplish this task as I used to do
before with Outlook Express? Hope now we're on the same track having
explained in more detail my situation.

Thanks in advanced for any other great ideas! Lists like these really help a
lot to be able to use more efficiently our technologies!

Gerardo

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201112
19/e115aad5/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: reexplaining Outlook07 and finding next text stream

Dave...
 

Gerardo,

I think we did answer your question last week, although it took a few
discussions to come up with the answer. Ed suggested you simply use F4 to
start the search and then Shift+f4 to search for the next text. Try this.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Gerardo Corripio" <gera1027@gmail.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Monday, December 19, 2011 09:50
Subject: reexplaining Outlook07 and finding next text stream


HI guys: Thanks for such great ideas on searching for next stream in
Outlook07! But let me reexplain how I use it hoping more ideas might come:
Suppose in a certain email I'd like to skip article via article or section
via section; each article or section is separated via a string of dashes,
asteris, number signs or other symbols. In Outlook Express I used to invoke
the Jaws Find dialogue via Insert+Control+f, set the dialogue to search for
the determined string, being safe to press Escape on finding the first
occurrence. When reading the section and wanting to go to the next one, I'd

do Insert+f3 and without having to reinvoke the Search command it'd put me
on the next occurrence of the string, thus being able to jump to the next
article or section without having to reenter the Find dialogue.

OK I'm wanting to accomplish the same in Outlook07 emails: I do
Insert+Control+f to invoke Outlook07's Find and search for the string once I
know what it uses to separate articles or sections; I read the first article
or section, and wanting to search for the next occurrence, I have to reenter
the Find dialogue with Insert+Control+f and do Enter on next; logic would
have it that via the Control+page up or page down like in Word, it'll find
the next occurrence, thus making it easier to read; yes sighted people can
click on the ribbon and click on the Find Next icon, but how would we do
this same task as Jaws users?

So my question is there another way to accomplish this task as I used to do
before with Outlook Express? Hope now we're on the same track having
explained in more detail my situation.

Thanks in advanced for any other great ideas! Lists like these really help a
lot to be able to use more efficiently our technologies!

Gerardo

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/e115aad5/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] The best screen resolution with JAWS

Dave...
 

David,

Sounds like a good start to a message to support@freedomscientific.com


Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "David" <davidwhitehead1957@cogeco.ca>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Monday, December 19, 2011 09:33
Subject: RE: [Bulk] The best screen resolution with JAWS


Hello Dave,

In most cases I agree with you,
Especially windows 7, the screen resolution shouldn't be an issue.

However, there's a couple client 64bit machine's I work on,
And with the screen resolution really high, jaws doesn't read didly squat
when I route jaws to pc.
However, wen I bring the resolution down to 1064 728 jaws reads fine.
Although jaws then starts to complain, that your not using the recommended
screen resolution settings.



-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Farfar on Laptop
Sent: Monday, December 19, 2011 12:19 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] The best screen resolution with JAWS

Anders,

You wrote: Earlier I used a screen resolution 1024*768, and sometime I still
use this


According to Freedom Scientific, it no longer matters what resolution you
use. I'm using 1920-1080, which is the recommended value for my laptop
display. No problems at all.

I think those days of having to worry about resolution are gone.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Anders Boholdt-Petersen"
<english_correspondences@boholdt-petersen.dk>
To: <jfw@lists.the-jdh.com>
Sent: Monday, December 19, 2011 09:02
Subject: [Bulk] The best screen resolution with JAWS


Hi everyone,

What is the best screen resolution when I have JAWS 11 to JAWS 13 installed
on both my Windows XP and my Windows 7 64-bit computer?

Earlier I used a screen resolution 1024*768, and sometime I still use this
screen resolution.

I have tried the screen resolution Windows 7 recommended (1280*1024), but
here I could not see the Facebook Chat with JAWS.

Very thanks for the answer.

Regards,
Anders


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


reexplaining Outlook07 and finding next text stream

Gerardo Corripio <gera1027@...>
 

HI guys: Thanks for such great ideas on searching for next stream in
Outlook07! But let me reexplain how I use it hoping more ideas might come:
Suppose in a certain email I'd like to skip article via article or section
via section; each article or section is separated via a string of dashes,
asteris, number signs or other symbols. In Outlook Express I used to invoke
the Jaws Find dialogue via Insert+Control+f, set the dialogue to search for
the determined string, being safe to press Escape on finding the first
occurrence. When reading the section and wanting to go to the next one, I'd

do Insert+f3 and without having to reinvoke the Search command it'd put me
on the next occurrence of the string, thus being able to jump to the next
article or section without having to reenter the Find dialogue.

OK I'm wanting to accomplish the same in Outlook07 emails: I do
Insert+Control+f to invoke Outlook07's Find and search for the string once I
know what it uses to separate articles or sections; I read the first article
or section, and wanting to search for the next occurrence, I have to reenter
the Find dialogue with Insert+Control+f and do Enter on next; logic would
have it that via the Control+page up or page down like in Word, it'll find
the next occurrence, thus making it easier to read; yes sighted people can
click on the ribbon and click on the Find Next icon, but how would we do
this same task as Jaws users?

So my question is there another way to accomplish this task as I used to do
before with Outlook Express? Hope now we're on the same track having
explained in more detail my situation.

Thanks in advanced for any other great ideas! Lists like these really help a
lot to be able to use more efficiently our technologies!

Gerardo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/e115aad5/attachment.html>


Re: [Bulk] The best screen resolution with JAWS

David <davidwhitehead1957@...>
 

Hello Dave,

In most cases I agree with you,
Especially windows 7, the screen resolution shouldn't be an issue.

However, there's a couple client 64bit machine's I work on,
And with the screen resolution really high, jaws doesn't read didly squat
when I route jaws to pc.
However, wen I bring the resolution down to 1064 728 jaws reads fine.
Although jaws then starts to complain, that your not using the recommended
screen resolution settings.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Farfar on Laptop
Sent: Monday, December 19, 2011 12:19 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] The best screen resolution with JAWS

Anders,

You wrote: Earlier I used a screen resolution 1024*768, and sometime I still
use this


According to Freedom Scientific, it no longer matters what resolution you
use. I'm using 1920-1080, which is the recommended value for my laptop
display. No problems at all.

I think those days of having to worry about resolution are gone.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Anders Boholdt-Petersen"
<english_correspondences@boholdt-petersen.dk>
To: <jfw@lists.the-jdh.com>
Sent: Monday, December 19, 2011 09:02
Subject: [Bulk] The best screen resolution with JAWS


Hi everyone,

What is the best screen resolution when I have JAWS 11 to JAWS 13 installed
on both my Windows XP and my Windows 7 64-bit computer?

Earlier I used a screen resolution 1024*768, and sometime I still use this
screen resolution.

I have tried the screen resolution Windows 7 recommended (1280*1024), but
here I could not see the Facebook Chat with JAWS.

Very thanks for the answer.

Regards,
Anders


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] The best screen resolution with JAWS

Dave...
 

Anders,

You wrote: Earlier I used a screen resolution 1024*768, and sometime I still
use this


According to Freedom Scientific, it no longer matters what resolution you
use. I'm using 1920-1080, which is the recommended value for my laptop
display. No problems at all.

I think those days of having to worry about resolution are gone.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Anders Boholdt-Petersen"
<english_correspondences@boholdt-petersen.dk>
To: <jfw@lists.the-jdh.com>
Sent: Monday, December 19, 2011 09:02
Subject: [Bulk] The best screen resolution with JAWS


Hi everyone,

What is the best screen resolution when I have JAWS 11 to JAWS 13 installed
on both my Windows XP and my Windows 7 64-bit computer?

Earlier I used a screen resolution 1024*768, and sometime I still use this
screen resolution.

I have tried the screen resolution Windows 7 recommended (1280*1024), but
here I could not see the Facebook Chat with JAWS.

Very thanks for the answer.

Regards,
Anders


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] [Bulk] Using Outlook07 how to search for Next string oftext in email?

Kimsan <kimsansong@...>
 

Dave:
I was just reading that tip from a book from access technology institute and
it said the keys I mentioned, hmmm. The F4 and shift f 4 doesn't work here
in 2010 neither.
I never find myself needing to find the next occurrence of a word in an
email but it would be good to know.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Farfar on Laptop
Sent: Friday, December 16, 2011 2:15 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] RE: [Bulk] RE: Using Outlook07 how to search for Next
string oftext in email?

Kimsan,

That doesn't seem to work. Neither does shift+F4.

I noticed an inconsistency, as well.

The first press of f4 opens the dialog to allow entering the text. Then
Enter will not do anything but land you on the Find Next button, contrary to
common sense. It requires pressing the find next button (Alt+f) to find the
word and announce the line containing the word.

Repeated presses of Alt+F will find next occurrences of the word.

Also I notice that even messages in plain text work fine with the F4 dialog,
so my earlier post was erroneous..

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Kimsan" <kimsansong@aol.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Friday, December 16, 2011 14:01
Subject: [Bulk] RE: [Bulk] RE: Using Outlook07 how to search for Next string
oftext in email?


Try CTRL page up or CTRL page down to find the next occurrence of the word.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Farfar on Laptop
Sent: Friday, December 16, 2011 1:17 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] RE: Using Outlook07 how to search for Next string of
text in email?

Kamil,

Okay I now tried the Insert+Ctrl+f and it does bring up the JAWS find, and
thank you for pointing that out to me. So it works on my machine with
Outlook 2007, Windows 7, and JAWS 13.0.527.

Now how do I have it search again without having to press Insert+Ctrl+F
again? I think that was the basis of Gerardo's original message.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Kamil Żak" <kamilek687@o2.pl>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Friday, December 16, 2011 13:11
Subject: [Bulk] RE: Using Outlook07 how to search for Next string of text in
email?


Sorry, wrong key. Control+insert+f is not working properly in your outlook
07 and jaws? How jaws version are you using? For my jaws 12.0
control+insert+f is working very good.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Kamil Żak
Sent: Friday, December 16, 2011 10:08 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Using Outlook07 how to search for Next string of text in
email?

Use f5 key ant type string to search, and press enter. Next time pres
only f3.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Gerardo Corripio
Sent: Friday, December 16, 2011 9:38 PM
To: 'The Jaws for Windows support list.'
Subject: Using Outlook07 how to search for Next string of text in
email?

Hi listers: Because in Outlook07 Insert+Control+f brings up
Outlook's Find dialogue rather than the Jaws, is there another way
of searching for the next text string rather than reopening the
Outlook's find and researching for the same string over and over again?

Gerardo

-------------- next part -------------- An HTML attachment was
scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-
jdh.com/attachments/20111216/f8418162/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


The best screen resolution with JAWS

Anders Boholdt-Petersen
 

Hi everyone,

What is the best screen resolution when I have JAWS 11 to JAWS 13 installed
on both my Windows XP and my Windows 7 64-bit computer?

Earlier I used a screen resolution 1024*768, and sometime I still use this
screen resolution.

I have tried the screen resolution Windows 7 recommended (1280*1024), but
here I could not see the Facebook Chat with JAWS.

Very thanks for the answer.

Regards,
Anders


JFW and Adobe Connect.

Mike Mote <mikemote@...>
 

Hi folks. Just wondering how well JFW and Adobe Connect work together. I have to utilize a chatroom with Adobe Connect for a future job interview, and I'm wondering if it will be accessible with speech. Any scripts out there that make it more accessible?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/a86e934d/attachment.html>


JAWS 11 not announce when I use the TAB-key in WORD 2003

Anders Boholdt-Petersen
 

Hi everyone,

When I use the TAB-key in WORD 2003, JAWS 11.0.1471 will not say how many
centimetres the cursor moves.

It is an error in this version of JAWS?

Very thanks.

Regards,
Anders


Jaws and Google AdWords?

Chris Smart <csmart8@...>
 

Hi folks.

Do any of you advertise your businesses through Google AdWords?
I'm having trouble with it, basically, things are very unpredictable.

Sometimes hitting enter on various mouseOvers or links bring up the expected submenus or additional options, but many times do not. I'm having trouble figuring out why this is.

For example, to see which search terms are triggering my adds, I hit ENTER on Campaigns, ENTER on Keywords, then click on a mouseover that says "see search terms". That is supposed to bring up options like all, selected, etc. but does not do so. I know I've managed to do this in the past, and can't for the life of me figure out how.

It's general flakiness and unpredictability that is driving me nuts with the Addwords system.

I have no trouble with some things, like selecting a date range, or page of items in the various tables, number of rows per page, but other things either work some of the time, or not at all.

I've tried some general things like 32-bit or 64-bit versions of Internet Explorer 9, trying jaws 12 as well as 13, trying Zoom ratios of 100 125 and 150%, turning automatic page refresh off, etc. But I'm having little success. I'd like to at least get to a point where simple operations take a few minutes or seconds, rather than an hour of aimless fiddling about until things seem to happen miraculously.

So, have any of you had more luck with AdWords? Any tips to share?

thanks
Chris
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING! Clear True Sound: www.ctsmastering.com --

Always have your stuff when you need it with @Dropbox. Seamlessly share with your friends and colleagues. 2GB account is free! http://db.tt/bQ2GuIt