Date   

Re: Outlook 2010 search and JAWS 13

Dondi
 

Hi Adrian,

This is what I did in Outlook 2010.
Press F4, type in search string and press enter.
Press escape until I'm back to the email of interest.
Press shift+F4, and Outlook will jump to the search string if found.
Pressing shift+F4 after this will jump to every instants there is.
If I want, I can open any email and do the same search with just shift+F4,
because the search string does not clear out.

Thanks for all the help this morning.

Dondi

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Adrian Spratt
Sent: Sunday, February 12, 2012 8:45 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Dondi, keep in mind that I'm still using Outlook 2003. So in my case:

1. Open a message.

2. Press F4.

3. Type the search string and press enter. Focus will land on the string, if
it appears in the message.

As I recall, Ed said to press shift-F4 to find a second instance of a search
string. Try that in Outlook 2010. It hasn't worked for me in Outlook 2003.
Instead, I press F4 again, hear the same search string and press enter.

Note that once I close a message, the search string disappears, so I have to
re-enter it if I want to find that same search string in another message.

Also, I don't find Outlook searches as reliable as they are in, say, MS Word
or WordPerfect. It could be due to any number of factors, such as slight
variations in how the targeted text appears.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Dondi
Sent: Sunday, February 12, 2012 10:34 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Hi Adrian,

All of this is more then I could have hoped for, I can actually find emails
and info now. Does anyone have a procedure for F4 and this searching in the
body of the message? I tried it but I'm not sure I understand what's
actually going on.

Dondi

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Adrian Spratt
Sent: Sunday, February 12, 2012 7:16 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

David, these steps work in Outlook 2003, so I expect the following procedure
also applies in Outlook 2007 and 2010. As has been pointed out many times on
this list, subject lines don't always correspond to the subject of the
message. To find messages containing a key word or phrase, I do the
following:

1. Control-shift-f for find a message.

2. Tab once, arrow down once, then shift-tab once. These three actions put
focus in an edit field.

3. Type the search string exactly as you expect it to appear in a message
and press enter.

4. When JAWS stops verbalizing "Stop" and switches to "Find now button,"
press the spacebar. (this step also applies to the procedures you outlined.
I find it stabilizes the rest of the operation.)

5. Follow the procedures you outline for navigating the list of relevant
messages and reading them.

Note. As we learned from Ed Marquette, once in a message, use F4 to find the
search string.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of David
Sent: Sunday, February 12, 2012 7:32 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Using Find In MSOutlook2010 Using Jaws Locating All Messages By One Sender:
This will work in any mailbox E.g, in-box, sent-box etc.
1. Press ctrl+shift+the letter "f"=advance-find.
2. Tab three times=from....edit.
3. Type in a sender's first or last name.
4. Press enter.
5. Press the f6key and you are put into the list of messages by the sender
you searched for.
6. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
7. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

***

II. Searching For A Specific Topic In A Subject Field:
1. Press ctrl+shift+the letter "f".2. Type a word that would be found in the
subject line you are searching for.
3. Press enter.
4. Press f6 and you are put into the list of messages containing the subject
line searched for.
5. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
6. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

If someone is using MSOutlook2007, Could they let me know if these steps
apply?


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Microsoft Outlook 2010 crashing issue

Brian Hansen <BC.Hansen23@...>
 

Hi John,

I'm having the same problems on this end, and I've emailed FS since JFW 12,
but nothing's been done about this.

Blessings,

Brian

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of John Martyn
Sent: Saturday, February 11, 2012 12:28 AM
To: 'The Jaws for Windows support list.'
Subject: Microsoft Outlook 2010 crashing issue

Hi all,
I have tried this in both JAWS 12 and JAWS 13 and it seems that Outlook 2010
crashes quite frequently and locks up JAWS. There seems to be many delays in
the program that cause it to lock up, like sloppy coding for example.
Whenever I reply to a message or start a new one, or just read emails,
Outlook just locks up and I get a long delay followed by JAWS locking up.
Sometimes if I wait long enough and alt tab away I can gain control again,
but most of the time the crash message comes up for outlook. I really like
Outlook because of my several profiles to choose from, but it really bugs me
that this issue happens all the time. I haven't reinstalled Office yet, but
I am not sure that will help. I think JAWS is doing something to lock up
outlook.
Anyone having these kinds of issues with Outlook 2010?
Any suggestions would be greatly appreciated.
John Martyn


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Possible Fix for JAWS 13.0.718 & Outlook Express

George Marshall
 

Hi Mike & all:
See my previous message in (JAWS-users list) about not having any problems with OE and latest JAWS13, in addition I find the JAWS reply directly to sender (insert+shift+R) works in latest version.
HTH,
George R. Marshall
marshall.geoma4@gmail.com

----- Original Message -----
From: "Mike & Barbara" <mb69mach1@charter.net>
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>
Sent: Friday, February 10, 2012 2:48 PM
Subject: Possible Fix for JAWS 13.0.718 & Outlook Express


Hi All,

I just went into Jaws Quick Settings, with the Jaws key + V, keystroke.
Arrowed down to, General Mail Settings, Message Header Field With Message
Announcement, unchecked this box, hit enter, & Jaws seems to be reading
emails a hell of a lot better. So, if anyone is having this problem give
the above a try. Hope this helps. Take care.
Mike

----- Original Message -----
From: Mike & Barbara
To: The Jaws for Windows support list.
Sent: Friday, February 10, 2012 11:26 AM
Subject: Re: JAWS 13.0.718 & Outlook Express


Hi All,

I just spoke with Freedom Scientific & they want anyone having email
issues
to report them to the email address below;

Support@FreedomScientific.com

Please tell them what operating system, 32 or 64 bit, email client /
program, & make sure that you include what build of Jaws you are having
the
problem with, in this case, J13.0.718. Take care.
Mike

----- Original Message -----
From: Mike & Barbara
To: The Jaws for Windows support list.
Sent: Friday, February 10, 2012 7:35 AM
Subject: Re: JAWS 13.0.718 & Outlook Express


Hi Dave,

Yes, i am having the same problem & it's irritating as hell! I think I
am
going back to the previous build. Take care.
Mike

----- Original Message -----
From: Dave Mitchell
To: Jaws List
Sent: Friday, February 10, 2012 5:28 AM
Subject: JAWS 13.0.718 & Outlook Express


Greetings All: Since installing the latest iteration of JAWS 13, I
note
new
irritating behavior with Outlook Express. When entering a single
message,
JAWS will generally repeat the subject line and, seemingly at random,
begin
somewhere within the message requiring me to keystroke to the
beginning
of
the message.
It seems to behave better when dealing with a queue of messages when
deleting the first message. Then subsequent messages open
appropriately
with their first line but this is risky business without first
previewing
the subject of the messages awaiting attention in the In Box.
I scribble all of this to inquire if other Lookout Express users are
having
similar problems. If it matters, I use the aging XP Home O S.
Happy Friday and don't forget Valentine's Day. You have been warned.
<G>
Mitch
"So of cheerfulness, or a good temper, the more it is spent, the more
it
remains."
Ralph Waldo Emerson


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120210/c9d133af/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120210/43f008bf/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120210/01879004/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Outlook 2010 search and JAWS 13

Adrian Spratt
 

Dondi, keep in mind that I'm still using Outlook 2003. So in my case:

1. Open a message.

2. Press F4.

3. Type the search string and press enter. Focus will land on the string, if
it appears in the message.

As I recall, Ed said to press shift-F4 to find a second instance of a search
string. Try that in Outlook 2010. It hasn't worked for me in Outlook 2003.
Instead, I press F4 again, hear the same search string and press enter.

Note that once I close a message, the search string disappears, so I have to
re-enter it if I want to find that same search string in another message.

Also, I don't find Outlook searches as reliable as they are in, say, MS Word
or WordPerfect. It could be due to any number of factors, such as slight
variations in how the targeted text appears.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Dondi
Sent: Sunday, February 12, 2012 10:34 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Hi Adrian,

All of this is more then I could have hoped for, I can actually find emails
and info now. Does anyone have a procedure for F4 and this searching in the
body of the message? I tried it but I'm not sure I understand what's
actually going on.

Dondi

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Adrian Spratt
Sent: Sunday, February 12, 2012 7:16 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

David, these steps work in Outlook 2003, so I expect the following procedure
also applies in Outlook 2007 and 2010. As has been pointed out many times on
this list, subject lines don't always correspond to the subject of the
message. To find messages containing a key word or phrase, I do the
following:

1. Control-shift-f for find a message.

2. Tab once, arrow down once, then shift-tab once. These three actions put
focus in an edit field.

3. Type the search string exactly as you expect it to appear in a message
and press enter.

4. When JAWS stops verbalizing "Stop" and switches to "Find now button,"
press the spacebar. (this step also applies to the procedures you outlined.
I find it stabilizes the rest of the operation.)

5. Follow the procedures you outline for navigating the list of relevant
messages and reading them.

Note. As we learned from Ed Marquette, once in a message, use F4 to find the
search string.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of David
Sent: Sunday, February 12, 2012 7:32 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

Using Find In MSOutlook2010 Using Jaws Locating All Messages By One Sender:
This will work in any mailbox E.g, in-box, sent-box etc.
1. Press ctrl+shift+the letter "f"=advance-find.
2. Tab three times=from....edit.
3. Type in a sender's first or last name.
4. Press enter.
5. Press the f6key and you are put into the list of messages by the sender
you searched for.
6. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
7. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

***

II. Searching For A Specific Topic In A Subject Field:
1. Press ctrl+shift+the letter "f".2. Type a word that would be found in the
subject line you are searching for.
3. Press enter.
4. Press f6 and you are put into the list of messages containing the subject
line searched for.
5. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
6. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

If someone is using MSOutlook2007, Could they let me know if these steps
apply?


Re: Outlook 2010 search and JAWS 13

Dondi
 

Hi Adrian,

All of this is more then I could have hoped for, I can actually find emails
and info now. Does anyone have a procedure for F4 and this searching in the
body of the message? I tried it but I'm not sure I understand what's
actually going on.

Dondi

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Adrian Spratt
Sent: Sunday, February 12, 2012 7:16 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13

David, these steps work in Outlook 2003, so I expect the following procedure
also applies in Outlook 2007 and 2010. As has been pointed out many times on
this list, subject lines don't always correspond to the subject of the
message. To find messages containing a key word or phrase, I do the
following:

1. Control-shift-f for find a message.

2. Tab once, arrow down once, then shift-tab once. These three actions put
focus in an edit field.

3. Type the search string exactly as you expect it to appear in a message
and press enter.

4. When JAWS stops verbalizing "Stop" and switches to "Find now button,"
press the spacebar. (this step also applies to the procedures you outlined.
I find it stabilizes the rest of the operation.)

5. Follow the procedures you outline for navigating the list of relevant
messages and reading them.

Note. As we learned from Ed Marquette, once in a message, use F4 to find the
search string.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of David
Sent: Sunday, February 12, 2012 7:32 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13


Using Find In MSOutlook2010 Using Jaws Locating All Messages By One Sender:
This will work in any mailbox E.g, in-box, sent-box etc.
1. Press ctrl+shift+the letter "f"=advance-find.
2. Tab three times=from....edit.
3. Type in a sender's first or last name.
4. Press enter.
5. Press the f6key and you are put into the list of messages by the sender
you searched for.
6. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
7. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

***

II. Searching For A Specific Topic In A Subject Field:
1. Press ctrl+shift+the letter "f".2. Type a word that would be found in the
subject line you are searching for.
3. Press enter.
4. Press f6 and you are put into the list of messages containing the subject
line searched for.
5. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
6. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

If someone is using MSOutlook2007,
Could they let me know if these steps apply?


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] Outlook 2010 search and JAWS 13

Dave...
 

David,

I'm using Outlook 2007.

I get slightly different controls.

I'm first put into a messages page in a multi-page dialog.

1. The first edit is a combo box that allows me to type my search string, or
use a previous one.

2. Tab once and there is a list of Message Subject Field, Only, Subject
Field and Message Body, or Frequently-Used Text Fields.

3. Then there are two buttons, From and Sent To, each followed by an edit
field.

4. There are check boxes and other Edit Combos for attributes like I'm the
only person on the TO: line, or I'm on the CC: line, etc.

5. On the other tab pages are attributes you can set for size of message,
the presence of attachments, time sent, time received, etc.

6. Then Alt+n starts the search.

F6 does bring up the list but I always have to Alt+x to expand it so that
the lines are readable.

Dave Carlson
Sent from somewhere in the Western United States, using a Dell Latitude
E6520 and Windows 7

----- Original Message -----
From: "David" <davidwhitehead1957@cogeco.ca>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Sunday, February 12, 2012 04:32
Subject: [Bulk] RE: Outlook 2010 search and JAWS 13



Using Find In MSOutlook2010 Using Jaws Locating All Messages By One Sender:
This will work in any mailbox E.g, in-box, sent-box etc.
1. Press ctrl+shift+the letter "f"=advance-find.
2. Tab three times=from....edit.
3. Type in a sender's first or last name.
4. Press enter.
5. Press the f6key and you are put into the list of messages by the sender
you searched for.
6. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
7. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

***

II. Searching For A Specific Topic In A Subject Field:
1. Press ctrl+shift+the letter "f".2. Type a word that would be found in the
subject line you are searching for.
3. Press enter.
4. Press f6 and you are put into the list of messages containing the subject
line searched for.
5. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
6. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

If someone is using MSOutlook2007,
Could they let me know if these steps apply?


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Outlook 2010 search and JAWS 13

Adrian Spratt
 

David, these steps work in Outlook 2003, so I expect the following procedure
also applies in Outlook 2007 and 2010. As has been pointed out many times on
this list, subject lines don't always correspond to the subject of the
message. To find messages containing a key word or phrase, I do the
following:

1. Control-shift-f for find a message.

2. Tab once, arrow down once, then shift-tab once. These three actions put
focus in an edit field.

3. Type the search string exactly as you expect it to appear in a message
and press enter.

4. When JAWS stops verbalizing "Stop" and switches to "Find now button,"
press the spacebar. (this step also applies to the procedures you outlined.
I find it stabilizes the rest of the operation.)

5. Follow the procedures you outline for navigating the list of relevant
messages and reading them.

Note. As we learned from Ed Marquette, once in a message, use F4 to find the
search string.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of David
Sent: Sunday, February 12, 2012 7:32 AM
To: 'The Jaws for Windows support list.'
Subject: RE: Outlook 2010 search and JAWS 13


Using Find In MSOutlook2010 Using Jaws Locating All Messages By One Sender:
This will work in any mailbox E.g, in-box, sent-box etc.
1. Press ctrl+shift+the letter "f"=advance-find.
2. Tab three times=from....edit.
3. Type in a sender's first or last name.
4. Press enter.
5. Press the f6key and you are put into the list of messages by the sender
you searched for.
6. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
7. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

***

II. Searching For A Specific Topic In A Subject Field:
1. Press ctrl+shift+the letter "f".2. Type a word that would be found in the
subject line you are searching for.
3. Press enter.
4. Press f6 and you are put into the list of messages containing the subject
line searched for.
5. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
6. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

If someone is using MSOutlook2007,
Could they let me know if these steps apply?


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Outlook 2010 search and JAWS 13

David <davidwhitehead1957@...>
 

Using Find In MSOutlook2010 Using Jaws Locating All Messages By One Sender:
This will work in any mailbox E.g, in-box, sent-box etc.
1. Press ctrl+shift+the letter "f"=advance-find.
2. Tab three times=from....edit.
3. Type in a sender's first or last name.
4. Press enter.
5. Press the f6key and you are put into the list of messages by the sender
you searched for.
6. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
7. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

***

II. Searching For A Specific Topic In A Subject Field:
1. Press ctrl+shift+the letter "f".2. Type a word that would be found in the
subject line you are searching for.
3. Press enter.
4. Press f6 and you are put into the list of messages containing the subject
line searched for.
5. If you open a message to read it, press escape once to close it. Then
move to the next one to read.
6. If you open a message to read and do not wish to read any more, press
escape twice and you are placed back in to the original location were the
search was started. This means if you were in the in-box when starting the
search, pressing escape twice will return you back to the in-box. Pressing
escape once will only return you to the list of messages found in the
search.

If someone is using MSOutlook2007,
Could they let me know if these steps apply?


Re: Outlook 2010 search and JAWS 13

John Martyn
 

When I do a search with the f3 key, I just type in the thing I want to find
and hit enter. I think I have tabbed through a few times to hear many other
options spoken.
Let me know if this helps.
John

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Dondi
Sent: Saturday, February 11, 2012 2:22 PM
To: JAWS mailing list
Subject: Outlook 2010 search and JAWS 13

Hi Everyone,



Is a search in Outlook 2010 with JAWS 13.0.718 even possible? I can't get to
any results and I'm not even sure if a search has even happened. When I tab
from the search edit box after pressing enter I go to a close the search
button. If I turn on the JAWS cursor I can arrow around and I hear what
sound like many search options but how I turn these on I have no idea. Does
anyone have a working procedure of how to do this?



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201202
11/96d67695/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] Another key combination question

Dave...
 

Dondi,

It did exactly what it was supposed to do. Immediately shut down and unload
JAWS. So of course it's not able to tell you that in training mode.

It's a very strong way to excise JAWS when your system is apparently locked
up and you suspect that JAWS is doing it.

Wait a few seconds and load JAWS by:

1. Windows+R and type JAWS13 (for JAWS 13)
or
2. Ctrl+Alt+J
or
3. Windows+M to minimize all applications and press J, then Enter.

#3 requires that only JAWS has a desktop icon beginning with the letter "J".


Dave Carlson
Sent from somewhere in the Western United States, using a Dell Latitude
E6520 and Windows 7

----- Original Message -----
From: "Dondi" <zidnod63@gmail.com>
To: "JAWS mailing list" <jfw@lists.the-jdh.com>
Sent: Saturday, February 11, 2012 13:52
Subject: [Bulk] Another key combination question


Hi Everyone,



Early this morning I briefly saw a email that said something about a key
combination of insert+windows+F4. Of course now I can't find this email
anymore. And when I turned on keyboard help and did this combination, to see
if JAWS could tell me what this did my computer basically locked up and
became unresponsive. Can anyone tell me what this is and what it does? I can
tell it does something, but what this is I don't know.



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120211/fed86240/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


volume

Holger Fiallo <holgerfiallo@...>
 

Hi,
My volume tends to go down. It is hard to rise the volume up, It just starting doing so today. It is there a short cut for it for the next time?

Holger Fiallo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120211/3075c3ac/attachment.html>


Re: Another key combination question

Adrian Spratt
 

No, there's no cautionary message. JAWS just vanishes. But as you say,
bringing JAWS back isn't a problem.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of deadcatbounce
Sent: Saturday, February 11, 2012 5:59 PM
To: The Jaws for Windows support list.
Subject: Re: Another key combination question

Could it be that that particular key combination bypasses the question about
"Are you sure you want to quit JAWS" and it turns off JAWS immediately? If
you have JAWS set to a hot key it shouldn't be any problem bringing it up
again, I'd think.
----- Original Message -----
From: "Adrian Spratt" <Adrian@AdrianSpratt.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Saturday, February 11, 2012 2:35 PM
Subject: RE: Another key combination question


Dondi and the list,

I was tempted to suggest that you find out by invoking the key
identifier with insert-1 on the number row above the letters. However,
I just tried it, and JAWS shut down. It's the first key combination
I've tested that works even in this mode.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com
[mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Dondi
Sent: Saturday, February 11, 2012 4:53 PM
To: JAWS mailing list
Subject: Another key combination question

Hi Everyone,



Early this morning I briefly saw a email that said something about a
key combination of insert+windows+F4. Of course now I can't find this
email anymore. And when I turned on keyboard help and did this
combination, to see if JAWS could tell me what this did my computer
basically locked up and became unresponsive. Can anyone tell me what
this is and what it does? I can tell it does something, but what this
is I don't know.



Dondi

-------------- next part -------------- An HTML attachment was
scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/
201202
11/fed86240/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Another key combination question

epierce@...
 

I googled "Insert+Windows+F4" and found the following archive from this email list:

"JAWS System Dump File from Insert+Windows+F4"

"When Jaws freezes, i.e. Jaws key + F4 does not quit, I try the Jaws key
+ windows + F4 to force Jaws to exit. "

Here is the entire message (long):

http://www.freelists.org/post/jfw/JAWS-System-Dump-File-from-InsertWindowsF4-Where-to-find-it

---- Original message ----
Date: Sat, 11 Feb 2012 14:59:22 -0800
From: jfw-bounces@lists.the-jdh.com (on behalf of "deadcatbounce" <JAWS@ca.rr.com>)
Subject: Re: Another key combination question
To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com>

Could it be that that particular key combination bypasses the question about
"Are you sure you want to quit JAWS" and it turns off JAWS immediately? If
you have JAWS set to a hot key it shouldn't be any problem bringing it up
again, I'd think.
----- Original Message -----
From: "Adrian Spratt" <Adrian@AdrianSpratt.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Saturday, February 11, 2012 2:35 PM
Subject: RE: Another key combination question


Dondi and the list,

I was tempted to suggest that you find out by invoking the key identifier
with insert-1 on the number row above the letters. However, I just tried
it,
and JAWS shut down. It's the first key combination I've tested that works
even in this mode.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Dondi
Sent: Saturday, February 11, 2012 4:53 PM
To: JAWS mailing list
Subject: Another key combination question

Hi Everyone,



Early this morning I briefly saw a email that said something about a key
combination of insert+windows+F4. Of course now I can't find this email
anymore. And when I turned on keyboard help and did this combination, to
see
if JAWS could tell me what this did my computer basically locked up and
became unresponsive. Can anyone tell me what this is and what it does? I
can
tell it does something, but what this is I don't know.



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201202
11/fed86240/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Another key combination question

deadcatbounce <JAWS@...>
 

Could it be that that particular key combination bypasses the question about "Are you sure you want to quit JAWS" and it turns off JAWS immediately? If you have JAWS set to a hot key it shouldn't be any problem bringing it up again, I'd think.

----- Original Message -----
From: "Adrian Spratt" <Adrian@AdrianSpratt.com>
To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com>
Sent: Saturday, February 11, 2012 2:35 PM
Subject: RE: Another key combination question


Dondi and the list,

I was tempted to suggest that you find out by invoking the key identifier
with insert-1 on the number row above the letters. However, I just tried it,
and JAWS shut down. It's the first key combination I've tested that works
even in this mode.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Dondi
Sent: Saturday, February 11, 2012 4:53 PM
To: JAWS mailing list
Subject: Another key combination question

Hi Everyone,



Early this morning I briefly saw a email that said something about a key
combination of insert+windows+F4. Of course now I can't find this email
anymore. And when I turned on keyboard help and did this combination, to see
if JAWS could tell me what this did my computer basically locked up and
became unresponsive. Can anyone tell me what this is and what it does? I can
tell it does something, but what this is I don't know.



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201202
11/fed86240/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


volume

Holger Fiallo <holgerfiallo@...>
 

Hi,How do I pin volume to the task next to IE, window media player? Using jaws 13, window home 64.

Holger Fiallo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120211/22e7ff6e/attachment.html>


Re: Another key combination question

Adrian Spratt
 

Dondi and the list,

I was tempted to suggest that you find out by invoking the key identifier
with insert-1 on the number row above the letters. However, I just tried it,
and JAWS shut down. It's the first key combination I've tested that works
even in this mode.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com]
On Behalf Of Dondi
Sent: Saturday, February 11, 2012 4:53 PM
To: JAWS mailing list
Subject: Another key combination question

Hi Everyone,



Early this morning I briefly saw a email that said something about a key
combination of insert+windows+F4. Of course now I can't find this email
anymore. And when I turned on keyboard help and did this combination, to see
if JAWS could tell me what this did my computer basically locked up and
became unresponsive. Can anyone tell me what this is and what it does? I can
tell it does something, but what this is I don't know.



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201202
11/fed86240/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Another key combination question

George B
 

It shuts down jaws

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-
jdh.com] On Behalf Of Dondi
Sent: Saturday, February 11, 2012 13:53
To: JAWS mailing list
Subject: Another key combination question

Hi Everyone,



Early this morning I briefly saw a email that said something about a
key
combination of insert+windows+F4. Of course now I can't find this email
anymore. And when I turned on keyboard help and did this combination,
to see
if JAWS could tell me what this did my computer basically locked up and
became unresponsive. Can anyone tell me what this is and what it does?
I can
tell it does something, but what this is I don't know.



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-
jdh.com/attachments/20120211/fed86240/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Outlook 2010 search and JAWS 13

Dondi
 

Hi Everyone,



Is a search in Outlook 2010 with JAWS 13.0.718 even possible? I can't get to
any results and I'm not even sure if a search has even happened. When I tab
from the search edit box after pressing enter I go to a close the search
button. If I turn on the JAWS cursor I can arrow around and I hear what
sound like many search options but how I turn these on I have no idea. Does
anyone have a working procedure of how to do this?



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120211/96d67695/attachment.html>


Re: Another key combination question

naboukhad nassr
 

Hello. Insert + windows key + F4 turns off JAWS. This is useful when JAWS is not responding and is not speaking. This turns it off and you can turn it on after some seconds.

On 2/11/2012 11:58 PM, Marquette, Ed wrote:
I have not tried this; however, remember that insert plus F-4 turns off JAWS.
So, you may have simply turned off speech.


-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dondi
Sent: Saturday, February 11, 2012 3:53 PM
To: JAWS mailing list
Subject: Another key combination question

Hi Everyone,



Early this morning I briefly saw a email that said something about a key
combination of insert+windows+F4. Of course now I can't find this email
anymore. And when I turned on keyboard help and did this combination, to see
if JAWS could tell me what this did my computer basically locked up and
became unresponsive. Can anyone tell me what this is and what it does? I can
tell it does something, but what this is I don't know.



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120211/fed86240/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
#############################################################################################################
ANY FEDERAL TAX ADVICE CONTAINED IN THIS MESSAGE SHOULD NOT BE USED OR REFERRED TO IN THE PROMOTING, MARKETING OR
RECOMMENDING OF ANY ENTITY, INVESTMENT PLAN OR ARRANGEMENT, AND SUCH ADVICE IS NOT INTENDED OR WRITTEN TO BE USED,
AND CANNOT BE USED, BY A TAXPAYER FOR THE PURPOSE OF AVOIDING PENALTIES UNDER THE INTERNAL REVENUE CODE.
#############################################################################################################
This E-mail message is confidential, is intended only for the named recipient(s) above and may contain information
that is privileged, attorney work product or otherwise protected by applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this E-mail message.
Thank you.
#############################################################################################################

_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Another key combination question

Marquette, Ed <Ed.Marquette@...>
 

I have not tried this; however, remember that insert plus F-4 turns off JAWS.
So, you may have simply turned off speech.

-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dondi
Sent: Saturday, February 11, 2012 3:53 PM
To: JAWS mailing list
Subject: Another key combination question

Hi Everyone,



Early this morning I briefly saw a email that said something about a key
combination of insert+windows+F4. Of course now I can't find this email
anymore. And when I turned on keyboard help and did this combination, to see
if JAWS could tell me what this did my computer basically locked up and
became unresponsive. Can anyone tell me what this is and what it does? I can
tell it does something, but what this is I don't know.



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20120211/fed86240/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@lists.the-jdh.com
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
#############################################################################################################
ANY FEDERAL TAX ADVICE CONTAINED IN THIS MESSAGE SHOULD NOT BE USED OR REFERRED TO IN THE PROMOTING, MARKETING OR
RECOMMENDING OF ANY ENTITY, INVESTMENT PLAN OR ARRANGEMENT, AND SUCH ADVICE IS NOT INTENDED OR WRITTEN TO BE USED,
AND CANNOT BE USED, BY A TAXPAYER FOR THE PURPOSE OF AVOIDING PENALTIES UNDER THE INTERNAL REVENUE CODE.
#############################################################################################################
This E-mail message is confidential, is intended only for the named recipient(s) above and may contain information
that is privileged, attorney work product or otherwise protected by applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this E-mail message.
Thank you.
#############################################################################################################