|
Re: Jaws-friendly firewall?
Dave Scrimenti <dscrimenti@...>
When I try to register, it says:
toggle quoted messageShow quoted text
Error: Page Not Found - Symantec Corp.
----- Original Message -----
From: "2.g.i" <2.g.i.84972@gmail.com> To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com> Sent: Saturday, December 24, 2011 1:48 PM Subject: Re: Jaws-friendly firewall? Hi Dave,
|
|
|
|
Re: Jaws-friendly firewall?
Dave Scrimenti <dscrimenti@...>
I downloaded it. I'll give it a try. Thanks.
toggle quoted messageShow quoted text
----- Original Message -----
From: "2.g.i" <2.g.i.84972@gmail.com> To: "The Jaws for Windows support list." <jfw@lists.the-jdh.com> Sent: Saturday, December 24, 2011 1:48 PM Subject: Re: Jaws-friendly firewall? Hi Dave,
|
|
|
|
New blind Group
Marvin Hunkin <startrekcafe@...>
Hi.
i have set up a new group at http://groups.yahoo.com/groups/Blind-Aid a group for the blind, discussion of blindness related issues and a place for people to hang out and to make friends. you can subscribe to this group by sending a blank message to Blind-Aid-subscribe@yahoogroups.com And i will be having some help from co-moderators to help me manage this group and to learn about yahoo groups management. Thanks. Marvin.
|
|
|
|
Re: looking for free pop mail
Karen Hughes <khughes8@...>
rob i dont know the answer to this question. mom
toggle quoted messageShow quoted text
----- Original Message -----
From: "Rob" <musicmaker365@gmail.com> To: "jfw" <jfw@lists.the-jdh.com> Sent: Thursday, December 22, 2011 2:55 PM Subject: looking for free pop mail Hi,
|
|
|
|
The office clipboard
deadcatbounce <JAWS@...>
When Ibring up the office clipboard in Word 2003 by doing CTRL+C twice, I thereafter need to use the JAWS cursor to navigate around to see what's actually on the clipboard. Is there a setting I can adjust so that I can use the PC cursor to do this? I'm using V11. Thank you and merry Christmas to all.
-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111223/14f80d7e/attachment.html>;
|
|
|
|
Jaws-friendly firewall?
Dave Scrimenti <dscrimenti@...>
Is there a good free, firewall for XP that's accessible with JFW 11? Something better than the Windows firewall.
-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111223/fa9dd4ed/attachment.html>;
|
|
|
|
Re: Where did the year go? Suddenly it is December ......again - and werealize
Angel
This is a most beautiful sentiment. Thank you for sending to us. May the new year bring to you all these good things as well.
toggle quoted messageShow quoted text
----- Original Message -----
From: "Sugar" <sugarsyl71@sbcglobal.net> To: "The Jaws for Windows support mailing list" <jfw@lists.the-jdh.com> Sent: Thursday, December 22, 2011 12:17 PM Subject: Where did the year go? Suddenly it is December ......again - and werealize Where did the year go? Suddenly it is December ......again - and we realize
|
|
|
|
Re: [Bulk] [Bulk] Just installed JAWS 13
Dave...
Wow. That's way different than mine. But good that you do have an ultimate
toggle quoted messageShow quoted text
solution. bTW if you ever begin to think that being stuck with a non-authorized message or a 40-minute mode on a Friday night is a real party-crasher, consider purchasing a dongle. Using it removes the need for the ILM authorization as long as the dongle is connected to a USB port. I have one, and it's on my keychain. Since I travel for my company, the very last thing I need is to have my laptop go bad and end up with a crippled version of JAWS when I can't get help. Dongle saves the day until I can get back to the office. Dave Carlson Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Dondi" <zidnod63@gmail.com> To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com> Sent: Thursday, December 22, 2011 13:43 Subject: [Bulk] RE: [Bulk] Just installed JAWS 13 Thanks Dave, I checked with Freedom Scientific and here's what I found out. Because I received my computer from the Veterans Administration it was handled a little differently. It went from Dell computers to a company called Evas in Rhode island where JAWS 12 and other software was installed. The story I heard was they upgraded from version 8 to 12 at Evas. And I have no SMA with Freedom because I got my computer from the VA. So the short of it sometime in the new year the VA is going to buy me JAWS 13. Thanks for the help. Merry Christmas and a happy New Year. Dondi -----Original Message----- From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Farfar on Laptop Sent: Wednesday, December 21, 2011 9:39 PM To: The Jaws for Windows support list. Subject: Re: [Bulk] Just installed JAWS 13 Dondi, Call FS. I had the same problem several months ago and the solution involved reactivating a prior version of JAWS first. They can help you right away. Dave Carlson Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area ----- Original Message ----- From: "Dondi" <zidnod63@gmail.com> To: "JAWS mailing list" <jfw@lists.the-jdh.com> Sent: Wednesday, December 21, 2011 19:41 Subject: [Bulk] Just installed JAWS 13 Hi everyone, I have just installed JAWS 13 but I am having a bit of a problem. JAWS 13 says "Your current authorization is for an earlier version of this Freedom Scientific product". If I continue and do the whole internet registration activation it says the activation was successful and JAWS needs to restart but when I restart JAWS it just continues saying the same thing. I thought when you installed the new version of JAWS that it would just use the registration code of JAWS 12? Anybody have any ideas? Dondi -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201112 21/dd2d4af3/attachment.html> _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
|
Re: [Bulk] Just installed JAWS 13
Dondi
Thanks Dave,
toggle quoted messageShow quoted text
I checked with Freedom Scientific and here's what I found out. Because I received my computer from the Veterans Administration it was handled a little differently. It went from Dell computers to a company called Evas in Rhode island where JAWS 12 and other software was installed. The story I heard was they upgraded from version 8 to 12 at Evas. And I have no SMA with Freedom because I got my computer from the VA. So the short of it sometime in the new year the VA is going to buy me JAWS 13. Thanks for the help. Merry Christmas and a happy New Year. Dondi
-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Farfar on Laptop Sent: Wednesday, December 21, 2011 9:39 PM To: The Jaws for Windows support list. Subject: Re: [Bulk] Just installed JAWS 13 Dondi, Call FS. I had the same problem several months ago and the solution involved reactivating a prior version of JAWS first. They can help you right away. Dave Carlson Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area ----- Original Message ----- From: "Dondi" <zidnod63@gmail.com> To: "JAWS mailing list" <jfw@lists.the-jdh.com> Sent: Wednesday, December 21, 2011 19:41 Subject: [Bulk] Just installed JAWS 13 Hi everyone, I have just installed JAWS 13 but I am having a bit of a problem. JAWS 13 says "Your current authorization is for an earlier version of this Freedom Scientific product". If I continue and do the whole internet registration activation it says the activation was successful and JAWS needs to restart but when I restart JAWS it just continues saying the same thing. I thought when you installed the new version of JAWS that it would just use the registration code of JAWS 12? Anybody have any ideas? Dondi -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201112 21/dd2d4af3/attachment.html> _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
|
Re: looking for free pop mail
Chris Smart <csmart8@...>
if by photo capture you mean captcha, try Firefox with the Webvisum extension.
I believe Gmail is free, can be set up using POP rather than IMAP, and if you can't solve their captcha they provide an audio version. Chris At 02:55 PM 12/22/2011, you wrote: Hi,-------------------------------------------------- CTS MASTERING: PROFESSIONAL MIXING AND MASTERING! Clear True Sound: www.ctsmastering.com -- Always have your stuff when you need it with @Dropbox. Seamlessly share with your friends and colleagues. 2GB account is free! http://db.tt/bQ2GuIt
|
|
|
|
looking for free pop mail
Rob <musicmaker365@...>
Hi,
is there a free pop mail account to sign up for and doesnt have a photo capture that make it imposible for jaws? Thanks, Rob You can leave me a voice mail or fax at 206-426-3505 "God is good all the time, & All the time God is good" -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111222/4664da13/attachment.html>;
|
|
|
|
Where did the year go? Suddenly it is December ......again - and we realize
Sugar <sugarsyl71@...>
Where did the year go? Suddenly it is December ......again - and we realize
that with giant strides we started in January and within a blink of an eye, 2011 is on its back! A big "Thank You" to each and everyone of you, for the huge impact you had on my life this year. Especially for all the support and e-mails I received.......without you, I'm sure that 2011 would have been extremely boring. I wish you all a Very Merry Christmas Season filled with Loving Wishes and Beautiful Thoughts. May 2012 mark the beginning of a Tidal Wave of Love, Happiness and Bright Futures. And to those who need someone special, may you find that true love. To those who need money, may your finances overflow To those who need caring, may you find a good heart To those who need friends, I am still here for you . Thanks for being my friend!! MERRY CHRISTMAS AND ALL THE BEST IN 2012 "And the angel said unto them, "Fear not! For, behold, I bring you tidings of great joy, Which shall be to all people. "For unto you is born this day in the city of David A Saviour, which is Christ the Lord. And this shall be a sign unto you: Ye shall find the babe wrapped in swaddling clothes, Lying in a manger. --St. Luke ii. 10-12" MERRY CHRISTMAS! ~Sugar -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111222/baf766d2/attachment.html>;
|
|
|
|
Re: [Bulk] Just installed JAWS 13
Dave...
David,
toggle quoted messageShow quoted text
While that may well be one situation, in my case it was an XP Pro machine with JAWS 9 and 11 installed. Installing JAWS 12 resulted in the same problem as experienced by Dondi. However the remedy was not to continue to burn off keys, as it didn't matter. I recall that JAWS 12 responded with already being activated, but on a subsequent reboot, the same problem arose. FS support came up with the remedy that involved either my JAWS 9 or JAWS 11, but not sure which. Once I did that, the problem never came back, even when I later installed JAWS 13. So again in my case it was an XP machine and not Windows 7. I think that Donny Harris' suggestion for a manual activation may be similar to what I needed to do, but not sure -- henceforth my suggestion for Dondi to refer to FS support for help. Dave Carlson Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "David" <davidwhitehead1957@cogeco.ca> To: "'The Jaws for Windows support list.'" <jfw@lists.the-jdh.com> Sent: Thursday, December 22, 2011 08:12 Subject: [Bulk] RE: Just installed JAWS 13 Hello there; As I mentioned in a message quite a while back, If you've gone to fs activate.com, And you've verified that you have keys available, Then? Perhaps if your using windows 7, The uac, "user account control" is stopping/blocking The activation process. I've experienced this behavior with a couple of my clients computers. So, I turned off the UAC, Went through the activation process, And everything worked well, Then I went back and turned on the UAC. -----Original Message----- From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Lisle, Ted (CHFS DMS) Sent: Thursday, December 22, 2011 7:44 AM To: The Jaws for Windows support list. Subject: RE: Just installed JAWS 13 Which version? The version on the disk preceded the fix, which, I believe, came in the November maintenance release. I worked a tandem with FS back on November 8 to get mine in. -----Original Message----- From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dondi Sent: Wednesday, December 21, 2011 10:42 PM To: JAWS mailing list Subject: Just installed JAWS 13 Hi everyone, I have just installed JAWS 13 but I am having a bit of a problem. JAWS 13 says "Your current authorization is for an earlier version of this Freedom Scientific product". If I continue and do the whole internet registration activation it says the activation was successful and JAWS needs to restart but when I restart JAWS it just continues saying the same thing. I thought when you installed the new version of JAWS that it would just use the registration code of JAWS 12? Anybody have any ideas? Dondi -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20 111221/dd2d4af3/attachment.html> _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
|
Re: Just installed JAWS 13
David <davidwhitehead1957@...>
Hello there;
toggle quoted messageShow quoted text
As I mentioned in a message quite a while back, If you've gone to fs activate.com, And you've verified that you have keys available, Then? Perhaps if your using windows 7, The uac, "user account control" is stopping/blocking The activation process. I've experienced this behavior with a couple of my clients computers. So, I turned off the UAC, Went through the activation process, And everything worked well, Then I went back and turned on the UAC.
-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Lisle, Ted (CHFS DMS) Sent: Thursday, December 22, 2011 7:44 AM To: The Jaws for Windows support list. Subject: RE: Just installed JAWS 13 Which version? The version on the disk preceded the fix, which, I believe, came in the November maintenance release. I worked a tandem with FS back on November 8 to get mine in. -----Original Message----- From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dondi Sent: Wednesday, December 21, 2011 10:42 PM To: JAWS mailing list Subject: Just installed JAWS 13 Hi everyone, I have just installed JAWS 13 but I am having a bit of a problem. JAWS 13 says "Your current authorization is for an earlier version of this Freedom Scientific product". If I continue and do the whole internet registration activation it says the activation was successful and JAWS needs to restart but when I restart JAWS it just continues saying the same thing. I thought when you installed the new version of JAWS that it would just use the registration code of JAWS 12? Anybody have any ideas? Dondi -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20 111221/dd2d4af3/attachment.html> _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
|
Re: Just installed JAWS 13
donnie harris <harris.donnie@...>
I had the same problem and I have had the same problem for the last 2 or 3
toggle quoted messageShow quoted text
years. So here is what I do to activate1. I choose to activate by phone, that is one of the options if you arrow down when you hear (activate via the internet) 2. You will need to choose configure manually. 3. You will need 3 numbers, a 30 digit number called the 30 digit serial number, also called your 30 digit activaction code) 4 your 20 digit authorization number.activation number. 5. Your locking code. You can find your locking code in the help section under about Jaws. You will have to route your Jaws to your p c curser. For the 30 and the 20 digit numbers you will need to call F.S. with your normal serial number and they can give you these other numbers. I think that my fire wall is preventing this from doing it's job and have learned to do this, it isn't hard at all. Good luck, Donnie Harris.
-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dondi Sent: Wednesday, December 21, 2011 9:42 PM To: JAWS mailing list Subject: Just installed JAWS 13 Hi everyone, I have just installed JAWS 13 but I am having a bit of a problem. JAWS 13 says "Your current authorization is for an earlier version of this Freedom Scientific product". If I continue and do the whole internet registration activation it says the activation was successful and JAWS needs to restart but when I restart JAWS it just continues saying the same thing. I thought when you installed the new version of JAWS that it would just use the registration code of JAWS 12? Anybody have any ideas? Dondi -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201112 21/dd2d4af3/attachment.html> _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
|
Re: Just installed JAWS 13
Lisle, Ted (CHFS DMS)
Which version? The version on the disk preceded the fix, which, I
toggle quoted messageShow quoted text
believe, came in the November maintenance release. I worked a tandem with FS back on November 8 to get mine in.
-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Dondi Sent: Wednesday, December 21, 2011 10:42 PM To: JAWS mailing list Subject: Just installed JAWS 13 Hi everyone, I have just installed JAWS 13 but I am having a bit of a problem. JAWS 13 says "Your current authorization is for an earlier version of this Freedom Scientific product". If I continue and do the whole internet registration activation it says the activation was successful and JAWS needs to restart but when I restart JAWS it just continues saying the same thing. I thought when you installed the new version of JAWS that it would just use the registration code of JAWS 12? Anybody have any ideas? Dondi -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20 111221/dd2d4af3/attachment.html> _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
|
Re: Just installed JAWS 13
Dondi
Chris,
toggle quoted messageShow quoted text
I'll tell you anyway if you are interested. I went to Freedom Scientific and checked and their web page said I'm authorized for two upgrades. But I'll call them in the morning and see what they have to say. Dondi
-----Original Message-----
From: jfw-bounces@lists.the-jdh.com [mailto:jfw-bounces@lists.the-jdh.com] On Behalf Of Chris Smart Sent: Wednesday, December 21, 2011 9:48 PM To: The Jaws for Windows support list. Subject: Re: Just installed JAWS 13 forget my reply, Dave probably has it correct. *grin* -------------------------------------------------- CTS MASTERING: PROFESSIONAL MIXING AND MASTERING! Clear True Sound: www.ctsmastering.com -- Always have your stuff when you need it with @Dropbox. Seamlessly share with your friends and colleagues. 2GB account is free! http://db.tt/bQ2GuIt _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
|
Re: Just installed JAWS 13
Chris Smart <csmart8@...>
forget my reply, Dave probably has it correct. *grin*
-------------------------------------------------- CTS MASTERING: PROFESSIONAL MIXING AND MASTERING! Clear True Sound: www.ctsmastering.com -- Always have your stuff when you need it with @Dropbox. Seamlessly share with your friends and colleagues. 2GB account is free! http://db.tt/bQ2GuIt
|
|
|
|
Re: Just installed JAWS 13
Chris Smart <csmart8@...>
Dondi, were you authorized for the upgrade? What's the status of your SMA?
-------------------------------------------------- CTS MASTERING: PROFESSIONAL MIXING AND MASTERING! Clear True Sound: www.ctsmastering.com -- Always have your stuff when you need it with @Dropbox. Seamlessly share with your friends and colleagues. 2GB account is free! http://db.tt/bQ2GuIt
|
|
|
|
Re: [Bulk] Just installed JAWS 13
Dave...
Dondi,
toggle quoted messageShow quoted text
Call FS. I had the same problem several months ago and the solution involved reactivating a prior version of JAWS first. They can help you right away. Dave Carlson Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Dondi" <zidnod63@gmail.com> To: "JAWS mailing list" <jfw@lists.the-jdh.com> Sent: Wednesday, December 21, 2011 19:41 Subject: [Bulk] Just installed JAWS 13 Hi everyone, I have just installed JAWS 13 but I am having a bit of a problem. JAWS 13 says "Your current authorization is for an earlier version of this Freedom Scientific product". If I continue and do the whole internet registration activation it says the activation was successful and JAWS needs to restart but when I restart JAWS it just continues saying the same thing. I thought when you installed the new version of JAWS that it would just use the registration code of JAWS 12? Anybody have any ideas? Dondi -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111221/dd2d4af3/attachment.html>; _______________________________________________ Jfw mailing list Jfw@lists.the-jdh.com http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
|
|
|
