Date   

Re: question about virtual memory

Dave...
 

Okay, Right click on your My Computer desktop Icon. Ctrl+tab until you get
to the advanced page. First button "settings" (there are three, and all
three say settings).

Here there will be a way to adjust the size of your virtual memory (swap
disk on your hard drive).

Again if you don't have 4 Gb RAM installed, you should look into purchasing
and installing to get the most you can. You didn't say, but if you're using
a 64-bit version of XP you could go even higher.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Deb and Cori" <debsoundandscent@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, November 19, 2011 21:39
Subject: Re: question about virtual memory


I am using windows xp.


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: question about virtual memory

Deb and the girls
 

I am using windows xp.


Re: [Bulk] CCleaner and Jaws

Dave...
 

Bob,

You're completely on your own when it comes to working in your registry. No
one who has a good moral compass would advise whether you should or should
not remove any keys. Too dangerous. I do my own and do so only with backups
and a bit of trepidation.

Good luck.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Robert Logue" <bobcat11@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, November 19, 2011 20:13
Subject: [Bulk] Re: CCleaner and Jaws


Excuse me. I was just wondering if there are any keys that Jaws uses that
would be damaged by using CCleaner.

I put in the Rainbow.Activator because I thought that was used by Jaws for
the ILM but perhaps I'm mistaken.

Bob


Bob

----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, November 19, 2011 8:30 PM
Subject: Re: CCleaner and Jaws


What? How are we supposed to answer that question for you? Any advice you
get from us will not be relevant to your registry. And *not* related to
JAWS, by the way.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Robert Logue" <bobcat11@...>
To: "The Jaws for Windows support mailing list" <jfw@...>
Sent: Saturday, November 19, 2011 19:22
Subject: CCleaner and Jaws


Are there any registry keys that should be
added to the exclude list.

I've added any folder related to Jaws or FS to the exclude list but wonder
about a few keys. One is
HKCR\Rainbow.Activator.ConfigurationFile\DefaultIcon



_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: CCleaner and Jaws

Robert Logue <bobcat11@...>
 

Excuse me. I was just wondering if there are any keys that Jaws uses that would be damaged by using CCleaner.

I put in the Rainbow.Activator because I thought that was used by Jaws for the ILM but perhaps I'm mistaken.

Bob


Bob

----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, November 19, 2011 8:30 PM
Subject: Re: CCleaner and Jaws


What? How are we supposed to answer that question for you? Any advice you
get from us will not be relevant to your registry. And *not* related to
JAWS, by the way.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Robert Logue" <bobcat11@...>
To: "The Jaws for Windows support mailing list" <jfw@...>
Sent: Saturday, November 19, 2011 19:22
Subject: CCleaner and Jaws


Are there any registry keys that should be
added to the exclude list.

I've added any folder related to Jaws or FS to the exclude list but wonder
about a few keys. One is
HKCR\Rainbow.Activator.ConfigurationFile\DefaultIcon



_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: CCleaner and Jaws

Dave...
 

What? How are we supposed to answer that question for you? Any advice you
get from us will not be relevant to your registry. And *not* related to
JAWS, by the way.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Robert Logue" <bobcat11@...>
To: "The Jaws for Windows support mailing list" <jfw@...>
Sent: Saturday, November 19, 2011 19:22
Subject: CCleaner and Jaws


Are there any registry keys that should be
added to the exclude list.

I've added any folder related to Jaws or FS to the exclude list but wonder
about a few keys. One is
HKCR\Rainbow.Activator.ConfigurationFile\DefaultIcon



_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] OT: How to delete huge number of messages from gmailinboxat onceusing JAWS

Samara Raine <samararaine@...>
 

I'm trying to think, but I think that would depend on how many e-mail messages you choose to have on one page of your inbox at a time. Like for me, I have 50 on each page. I'm not sure how far up the numbers can go, but I'll try and figure out how else you might be able to delete tons of messages.

Samara

----- Original Message -----
From: "Ketan Kothari" <muktaketan@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, November 19, 2011 9:14 PM
Subject: Re: [Bulk] OT: How to delete huge number of messages from gmailinboxat onceusing JAWS


The problem is that I have several thousands of mails that I wish to
ddelete. Now the steps told by Samara only deletes 20 conversations
(at the most 100 mails). How do I delete huge numbers? Thank you

On 11/20/11, Samara Raine <samararaine@...> wrote:
Originally posted by Bill White. I've used this and it does work. Just be
sure to delete the filter.

How to create a filter in your gmail account which will delete large groups
of messages in your inbox.


1. Sign into your gmail account using Internet Explorer.

2. Press Insert+F7 to open the links list.

3. Press the letter S until you hear Settings, then press Enter.

4. Press Insert+F7 to open the links list again.

5. Press the letter C until you hear Create a filter, and then press Enter.

6. Press the letter F until you hear From: Edit.

7. In this field, type *@*

8. Press Tab until you hear: Next Step Button and press the space bar.

9. When the next page loads, press the letter X until you hear: Delete it
Check Box Not Checked. Press the space bar to check this item.

10. Press the letter X until you hear: Also apply filter to 20 conversations
below Check Box Not Checked, and press the space bar to check this item.

11. Press Tab until you hear: Create Filter Button, and press the space bar.
Your filter should now be created.

12. After your filter is created, press Insert+F7, then the letter I to be
taken back to your inbox where you will see all of your messages still there
in your inbox.

13. Close Internet Explorer to exit out of the gmail web page.

14. Sign into your gmail account using Internet Explorer again.

15. Go to your inbox, where you should see that it is empty.

16. Press Insert+F7 to open the links list.

17. Press the letter S until you hear Settings, then press Enter.

18. Press F7 for the links list, then press the letter F until you hear
Filters, and press Enter.

19. Press the letter B until you hear: Delete It Button. Press the space
bar.

20. When the page loads, you will hear JAWS say: Your filter has been
deleted.

21. Be sure to do steps 14 through 18, or all of your e-mail will continue
to be deleted and sent to the trash.

Samara


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Ketan Kothari
Phone: [r] 24223281,
Cell: 9987550614
MSN ID: muktaketan@...
Skype ID: Ketan3333

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] [Bulk] OT: How to delete huge number of messages from gmailinboxat onceusing JAWS

Dave...
 

Keatan,

If you have that many messages, then call Google Tech Support and ask them
to do it for you. Or else close your Google Mail account, and open a new
one.
Obviously not a JAWS issue.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Ketan Kothari" <muktaketan@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, November 19, 2011 18:14
Subject: [Bulk] Re: [Bulk] OT: How to delete huge number of messages from
gmailinboxat onceusing JAWS


The problem is that I have several thousands of mails that I wish to
ddelete. Now the steps told by Samara only deletes 20 conversations
(at the most 100 mails). How do I delete huge numbers? Thank you

On 11/20/11, Samara Raine <samararaine@...> wrote:
Originally posted by Bill White. I've used this and it does work. Just be
sure to delete the filter.

How to create a filter in your gmail account which will delete large
groups
of messages in your inbox.


1. Sign into your gmail account using Internet Explorer.

2. Press Insert+F7 to open the links list.

3. Press the letter S until you hear Settings, then press Enter.

4. Press Insert+F7 to open the links list again.

5. Press the letter C until you hear Create a filter, and then press
Enter.

6. Press the letter F until you hear From: Edit.

7. In this field, type *@*

8. Press Tab until you hear: Next Step Button and press the space bar.

9. When the next page loads, press the letter X until you hear: Delete it
Check Box Not Checked. Press the space bar to check this item.

10. Press the letter X until you hear: Also apply filter to 20
conversations
below Check Box Not Checked, and press the space bar to check this item.

11. Press Tab until you hear: Create Filter Button, and press the space
bar.
Your filter should now be created.

12. After your filter is created, press Insert+F7, then the letter I to be
taken back to your inbox where you will see all of your messages still
there
in your inbox.

13. Close Internet Explorer to exit out of the gmail web page.

14. Sign into your gmail account using Internet Explorer again.

15. Go to your inbox, where you should see that it is empty.

16. Press Insert+F7 to open the links list.

17. Press the letter S until you hear Settings, then press Enter.

18. Press F7 for the links list, then press the letter F until you hear
Filters, and press Enter.

19. Press the letter B until you hear: Delete It Button. Press the space
bar.

20. When the page loads, you will hear JAWS say: Your filter has been
deleted.

21. Be sure to do steps 14 through 18, or all of your e-mail will continue
to be deleted and sent to the trash.

Samara


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Ketan Kothari
Phone: [r] 24223281,
Cell: 9987550614
MSN ID: muktaketan@...
Skype ID: Ketan3333

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Can?t tell if registry items are checked in CCleaner

Robert Logue <bobcat11@...>
 

Thanks Jim. The checkboxes in the treeview of items to analyze also work correctly for me. It is the state of the items in the results list that don't work for me.

I'm trying to figure out how to get Jaws to read the labelled icons when using normal navigation.

Bob

----- Original Message -----
From: "Jim L" <jimscave@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Saturday, November 19, 2011 7:38 PM
Subject: RE: Can?t tell if registry items are checked in CCleaner


Am running Jaws 11 and the registry check boxes are announce but still the
rest aren't even with the latest version 3.12 which is so frustrating



-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Robert Logue
Sent: Sunday, 20 November 2011 10:12 AM
To: The Jaws for Windows support mailing list
Subject: Can?t tell if registry items are checked in CCleaner


Can't tell if registry items are checked in CCleaner with Jaws

CCleaner registry cleaner recent versions, Win XP 32 and Win 7 64. Jaws 11
and 13..

Can't tell if items in the result list are checked. Jaws always says they
are checked even when they are not. Jaws cursor shows graphics labeled
corner and checked. Not indicated when moving through the list. Spacebar
changes state but Jaws doesn't indicate. Always says checked Tried
setting graphics from labeled to all. Still need to use Jaws cursor to find

out if something is checked or not.

Add New Configuration
Application CCleaner64
Configuration Name CCleaner64
Ok

Window Classes - CCleaner64
New Class Assigned Classes
SysListView32
Assign to:
3State[didn't work]
Button
CheckBox[didn't work]
ComboBox[didn't work]
Dialog
Edit
EditCombo[didn't work]
ExtendedSelectListBox[didn't work]
Graphic
GroupBox
HeaderBar
HotKey
Irrelevant
ListBox[didn't work]
ListView[didn't work]
MS Active Accessibility[didn't work]
MultilineEdit[didn't work]
MultiSelectListBox [didn't work]
PasswordEdit
RadioButton
ReadOnlyEdit
ScrollBar
Slider
SpinBox
Static
StatusBar
TabControl
ToolBar
ToolTip
TreeView
OK Cancel Add Class Remove Class


I didn't try everything but doubt the others would help.

How do I conclude the state which is clearly shown as a graphic with the
Jaws cursor to be indicated with using regular navigation. Spacebar changes

state but Jaws always says an item is checked when navigating to it in the
list. Customize list view didn't help either.

Windows 7 654, Jaws 13.


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


CCleaner and Jaws

Robert Logue <bobcat11@...>
 

Are there any registry keys that should be
added to the exclude list.

I've added any folder related to Jaws or FS to the exclude list but wonder about a few keys. One is HKCR\Rainbow.Activator.ConfigurationFile\DefaultIcon


Re: Can?t tell if registry items are checked in CCleaner

Jim L
 

Am running Jaws 11 and the registry check boxes are announce but still the
rest aren't even with the latest version 3.12 which is so frustrating

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Robert Logue
Sent: Sunday, 20 November 2011 10:12 AM
To: The Jaws for Windows support mailing list
Subject: Can?t tell if registry items are checked in CCleaner


Can't tell if registry items are checked in CCleaner with Jaws

CCleaner registry cleaner recent versions, Win XP 32 and Win 7 64. Jaws 11
and 13..

Can't tell if items in the result list are checked. Jaws always says they
are checked even when they are not. Jaws cursor shows graphics labeled
corner and checked. Not indicated when moving through the list. Spacebar
changes state but Jaws doesn't indicate. Always says checked Tried
setting graphics from labeled to all. Still need to use Jaws cursor to find

out if something is checked or not.

Add New Configuration
Application CCleaner64
Configuration Name CCleaner64
Ok

Window Classes - CCleaner64
New Class Assigned Classes
SysListView32
Assign to:
3State[didn't work]
Button
CheckBox[didn't work]
ComboBox[didn't work]
Dialog
Edit
EditCombo[didn't work]
ExtendedSelectListBox[didn't work]
Graphic
GroupBox
HeaderBar
HotKey
Irrelevant
ListBox[didn't work]
ListView[didn't work]
MS Active Accessibility[didn't work]
MultilineEdit[didn't work]
MultiSelectListBox [didn't work]
PasswordEdit
RadioButton
ReadOnlyEdit
ScrollBar
Slider
SpinBox
Static
StatusBar
TabControl
ToolBar
ToolTip
TreeView
OK Cancel Add Class Remove Class


I didn't try everything but doubt the others would help.

How do I conclude the state which is clearly shown as a graphic with the
Jaws cursor to be indicated with using regular navigation. Spacebar changes

state but Jaws always says an item is checked when navigating to it in the
list. Customize list view didn't help either.

Windows 7 654, Jaws 13.


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] OT: How to delete huge number of messages from gmail inboxat onceusing JAWS

Ketan Kothari <muktaketan@...>
 

The problem is that I have several thousands of mails that I wish to
ddelete. Now the steps told by Samara only deletes 20 conversations
(at the most 100 mails). How do I delete huge numbers? Thank you

On 11/20/11, Samara Raine <samararaine@...> wrote:
Originally posted by Bill White. I've used this and it does work. Just be
sure to delete the filter.

How to create a filter in your gmail account which will delete large groups
of messages in your inbox.


1. Sign into your gmail account using Internet Explorer.

2. Press Insert+F7 to open the links list.

3. Press the letter S until you hear Settings, then press Enter.

4. Press Insert+F7 to open the links list again.

5. Press the letter C until you hear Create a filter, and then press Enter.

6. Press the letter F until you hear From: Edit.

7. In this field, type *@*

8. Press Tab until you hear: Next Step Button and press the space bar.

9. When the next page loads, press the letter X until you hear: Delete it
Check Box Not Checked. Press the space bar to check this item.

10. Press the letter X until you hear: Also apply filter to 20 conversations
below Check Box Not Checked, and press the space bar to check this item.

11. Press Tab until you hear: Create Filter Button, and press the space bar.
Your filter should now be created.

12. After your filter is created, press Insert+F7, then the letter I to be
taken back to your inbox where you will see all of your messages still there
in your inbox.

13. Close Internet Explorer to exit out of the gmail web page.

14. Sign into your gmail account using Internet Explorer again.

15. Go to your inbox, where you should see that it is empty.

16. Press Insert+F7 to open the links list.

17. Press the letter S until you hear Settings, then press Enter.

18. Press F7 for the links list, then press the letter F until you hear
Filters, and press Enter.

19. Press the letter B until you hear: Delete It Button. Press the space
bar.

20. When the page loads, you will hear JAWS say: Your filter has been
deleted.

21. Be sure to do steps 14 through 18, or all of your e-mail will continue
to be deleted and sent to the trash.

Samara


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
Ketan Kothari
Phone: [r] 24223281,
Cell: 9987550614
MSN ID: muktaketan@...
Skype ID: Ketan3333


Can?t tell if registry items are checked in CCleaner

Robert Logue <bobcat11@...>
 

Can’t tell if registry items are checked in CCleaner with Jaws

CCleaner registry cleaner recent versions, Win XP 32 and Win 7 64. Jaws 11 and 13..

Can’t tell if items in the result list are checked. Jaws always says they are checked even when they are not. Jaws cursor shows graphics labeled corner and checked. Not indicated when moving through the list. Spacebar changes state but Jaws doesn’t indicate. Always says checked Tried setting graphics from labeled to all. Still need to use Jaws cursor to find out if something is checked or not.

Add New Configuration
Application CCleaner64
Configuration Name CCleaner64
Ok

Window Classes - CCleaner64
New Class Assigned Classes
SysListView32
Assign to:
3State[didn’t work]
Button
CheckBox[didn’t work]
ComboBox[didn’t work]
Dialog
Edit
EditCombo[didn’t work]
ExtendedSelectListBox[didn’t work]
Graphic
GroupBox
HeaderBar
HotKey
Irrelevant
ListBox[didn’t work]
ListView[didn’t work]
MS Active Accessibility[didn’t work]
MultilineEdit[didn’t work]
MultiSelectListBox [didn’t work]
PasswordEdit
RadioButton
ReadOnlyEdit
ScrollBar
Slider
SpinBox
Static
StatusBar
TabControl
ToolBar
ToolTip
TreeView
OK Cancel Add Class Remove Class


I didn’t try everything but doubt the others would help.

How do I conclude the state which is clearly shown as a graphic with the Jaws cursor to be indicated with using regular navigation. Spacebar changes state but Jaws always says an item is checked when navigating to it in the list. Customize list view didn’t help either.

Windows 7 654, Jaws 13.


Re: Forms Mode in IE Was: Removing Older Versions of JFW

Chris Smart <csmart8@...>
 

Marcia, which forms, and on which website?

At 07:24 PM 11/19/2011, you wrote:
Example please? Your point has no validity without a way for someone to
confirm, and no solution if we are not offered the chance to help.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Marsha" <marcatony@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, November 19, 2011 15:31
Subject: Re: Forms Mode in IE Was: Removing Older Versions of JFW


HI
There are forms which don't even show up in later versions of Jaws.

Marsha



_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING
Clear True Sound
www.ctsmastering.com
and be sure to "like us" on Facebook:
https://www.facebook.com/pages/CTS-Mastering/139114066128698


Re: Dongle:Jaws license converting to home edition fromprofessionaledition repeatedly.

Amar Jain
 

I don't have ILM key. We in India as an individual only buy dongles.

-----Original Message-----
From: Dave Scrimenti
Sent: Sunday, November 20, 2011 6:44 AM
To: The Jaws for Windows support list.
Subject: Re: Dongle:Jaws license converting to home edition fromprofessionaledition repeatedly.

Can you try ILM authorization to see if the problem is with the dongle?
Since so many things can go wrong, and frequently don't seem related to each
other, I have sometimes found that reformating solves problems that I
couldn't figure out.
----- Original Message -----
From: "Amar Jain" <amarjain@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, November 19, 2011 6:02 PM
Subject: Re: Dongle:Jaws license converting to home edition from
professionaledition repeatedly.


Ya, that alternative I have kept on my system.
Any way to know the cause and solve the problem?
When all other programs are working fine, and antivirus (aveera) doesn't detect Jaws as virus, then will formatting the system do anything good except wasting my time?
And, is there any way I can generate log of this dongle problem and send it to FS and see if they can do something about it?
Regards
Amar Jain.
-----Original Message-----
From: Dave Scrimenti
Sent: Saturday, November 19, 2011 8:49 AM
To: The Jaws for Windows support list.
Subject: Re: Dongle:Jaws license converting to home edition fromprofessionaledition repeatedly.

I don't have a permanent solution, but perhaps until your exams are over,
you could use a previous version of jaws.
----- Original Message -----
From: "Amar Jain" <amarjain@...>
To: <jfw@...>
Sent: Friday, November 18, 2011 6:00 PM
Subject: Dongle:Jaws license converting to home edition from
professionaledition repeatedly.


All,
I am using Jaws 13’s latest built with dongle for my authorization on windows 7 64 Bit Pro.
After release of Jaws 13, for many days things were good. However, thereafter suddenly the activation manager started coming when Jaws was started.
I did clean uninstall and reinstall of Jaws, removed the sentinal system driver and super pro / ultra pro from device manager, reinstalled freedomscientific products including open book, but nothing worked.
When issue was brought to the notice of freedomscientific technical support, we came to know that my Jaws is getting converted to home edition instead of professional edition again and again. After conversations with support team, I was given an authorization file (.dath) to update my dongle again. For few days it worked well, but again the problem persisted.
Despite letting the support know this fact, the only solution which is given to me so far is to use the update file whenever any such issue occurs.
And to sum it up we haven’t able to crack the problem.
My problem is that I have my law semester exams from 22nd November, and I can’t take any risk. As I am the first student of Mumbai University who has been allowed to use computer for his exams, I have to produce the results to the best of my capacity in order to insure that such facility can be extended to all blind students of our university and in other universities of the country.
And since I have the dongle, so if it fails during exams, I would even not be able to use it on an alternative system. My dealer however has come to a conclusion that it is my system problem, so the last option is to format my system. However my system is completely clean, no problems whatsoever with any other program exists so far. What my dealer’s reasoning is that since it is only happening with you, that is why FS has not worked on it in order to get it fixed for every version. He has assured me to look into my problem though.
Contrary to this, FS has been mentioning in the enhancements about authorization and upgrade problems.
I shall be highly obliged if one can provide me any solution of this problem at the earliest possible.
Regards
Amar Jain.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111119/ea73e2f6/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Dongle:Jaws license converting to home edition from professionaledition repeatedly.

Dave Scrimenti <dscrimenti@...>
 

Can you try ILM authorization to see if the problem is with the dongle? Since so many things can go wrong, and frequently don't seem related to each other, I have sometimes found that reformating solves problems that I couldn't figure out.

----- Original Message -----
From: "Amar Jain" <amarjain@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, November 19, 2011 6:02 PM
Subject: Re: Dongle:Jaws license converting to home edition from professionaledition repeatedly.


Ya, that alternative I have kept on my system.
Any way to know the cause and solve the problem?
When all other programs are working fine, and antivirus (aveera) doesn't detect Jaws as virus, then will formatting the system do anything good except wasting my time?
And, is there any way I can generate log of this dongle problem and send it to FS and see if they can do something about it?
Regards
Amar Jain.
-----Original Message-----
From: Dave Scrimenti
Sent: Saturday, November 19, 2011 8:49 AM
To: The Jaws for Windows support list.
Subject: Re: Dongle:Jaws license converting to home edition fromprofessionaledition repeatedly.

I don't have a permanent solution, but perhaps until your exams are over,
you could use a previous version of jaws.
----- Original Message -----
From: "Amar Jain" <amarjain@...>
To: <jfw@...>
Sent: Friday, November 18, 2011 6:00 PM
Subject: Dongle:Jaws license converting to home edition from
professionaledition repeatedly.


All,
I am using Jaws 13’s latest built with dongle for my authorization on windows 7 64 Bit Pro.
After release of Jaws 13, for many days things were good. However, thereafter suddenly the activation manager started coming when Jaws was started.
I did clean uninstall and reinstall of Jaws, removed the sentinal system driver and super pro / ultra pro from device manager, reinstalled freedomscientific products including open book, but nothing worked.
When issue was brought to the notice of freedomscientific technical support, we came to know that my Jaws is getting converted to home edition instead of professional edition again and again. After conversations with support team, I was given an authorization file (.dath) to update my dongle again. For few days it worked well, but again the problem persisted.
Despite letting the support know this fact, the only solution which is given to me so far is to use the update file whenever any such issue occurs.
And to sum it up we haven’t able to crack the problem.
My problem is that I have my law semester exams from 22nd November, and I can’t take any risk. As I am the first student of Mumbai University who has been allowed to use computer for his exams, I have to produce the results to the best of my capacity in order to insure that such facility can be extended to all blind students of our university and in other universities of the country.
And since I have the dongle, so if it fails during exams, I would even not be able to use it on an alternative system. My dealer however has come to a conclusion that it is my system problem, so the last option is to format my system. However my system is completely clean, no problems whatsoever with any other program exists so far. What my dealer’s reasoning is that since it is only happening with you, that is why FS has not worked on it in order to get it fixed for every version. He has assured me to look into my problem though.
Contrary to this, FS has been mentioning in the enhancements about authorization and upgrade problems.
I shall be highly obliged if one can provide me any solution of this problem at the earliest possible.
Regards
Amar Jain.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111119/ea73e2f6/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Forms Mode in IE Was: Removing Older Versions of JFW

Dave Scrimenti <dscrimenti@...>
 

Such as?

----- Original Message -----
From: "Marsha" <marcatony@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, November 19, 2011 6:31 PM
Subject: Re: Forms Mode in IE Was: Removing Older Versions of JFW


HI
There are forms which don't even show up in later versions of Jaws.
Marsha _______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Forms Mode in IE Was: Removing Older Versions of JFW

Dave...
 

Example please? Your point has no validity without a way for someone to
confirm, and no solution if we are not offered the chance to help.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Marsha" <marcatony@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, November 19, 2011 15:31
Subject: Re: Forms Mode in IE Was: Removing Older Versions of JFW


HI
There are forms which don't even show up in later versions of Jaws.

Marsha



_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Forms Mode in IE Was: Removing Older Versions of JFW

Marsha <marcatony@...>
 

HI
There are forms which don't even show up in later versions of Jaws.

Marsha


Re: Dongle:Jaws license converting to home edition from professional edition repeatedly.

Amar Jain
 

Ya, that alternative I have kept on my system.
Any way to know the cause and solve the problem?
When all other programs are working fine, and antivirus (aveera) doesn't detect Jaws as virus, then will formatting the system do anything good except wasting my time?
And, is there any way I can generate log of this dongle problem and send it to FS and see if they can do something about it?
Regards
Amar Jain.

-----Original Message-----
From: Dave Scrimenti
Sent: Saturday, November 19, 2011 8:49 AM
To: The Jaws for Windows support list.
Subject: Re: Dongle:Jaws license converting to home edition fromprofessionaledition repeatedly.

I don't have a permanent solution, but perhaps until your exams are over,
you could use a previous version of jaws.
----- Original Message -----
From: "Amar Jain" <amarjain@...>
To: <jfw@...>
Sent: Friday, November 18, 2011 6:00 PM
Subject: Dongle:Jaws license converting to home edition from
professionaledition repeatedly.


All,
I am using Jaws 13’s latest built with dongle for my authorization on windows 7 64 Bit Pro.
After release of Jaws 13, for many days things were good. However, thereafter suddenly the activation manager started coming when Jaws was started.
I did clean uninstall and reinstall of Jaws, removed the sentinal system driver and super pro / ultra pro from device manager, reinstalled freedomscientific products including open book, but nothing worked.
When issue was brought to the notice of freedomscientific technical support, we came to know that my Jaws is getting converted to home edition instead of professional edition again and again. After conversations with support team, I was given an authorization file (.dath) to update my dongle again. For few days it worked well, but again the problem persisted.
Despite letting the support know this fact, the only solution which is given to me so far is to use the update file whenever any such issue occurs.
And to sum it up we haven’t able to crack the problem.
My problem is that I have my law semester exams from 22nd November, and I can’t take any risk. As I am the first student of Mumbai University who has been allowed to use computer for his exams, I have to produce the results to the best of my capacity in order to insure that such facility can be extended to all blind students of our university and in other universities of the country.
And since I have the dongle, so if it fails during exams, I would even not be able to use it on an alternative system. My dealer however has come to a conclusion that it is my system problem, so the last option is to format my system. However my system is completely clean, no problems whatsoever with any other program exists so far. What my dealer’s reasoning is that since it is only happening with you, that is why FS has not worked on it in order to get it fixed for every version. He has assured me to look into my problem though.
Contrary to this, FS has been mentioning in the enhancements about authorization and upgrade problems.
I shall be highly obliged if one can provide me any solution of this problem at the earliest possible.
Regards
Amar Jain.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111119/ea73e2f6/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: question about virtual memory

michael capelle <michael.capelle@...>
 

this should be brought over to blindtech.
to subscribe, send a message to:
blindtech-subscribe@...

----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, November 19, 2011 4:46 PM
Subject: Re: question about virtual memory


Either add more RAM (up to 4 Gb in most cases) or increase the size of your
virtual memory.

Are you using XP or Windows 7? That answer will dictate the steps necessary.
I recommend you post this question to a blind computer users list for a
comprehensive answer.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Deb and Cori" <debsoundandscent@...>
To: <JFw@...>
Sent: Saturday, November 19, 2011 13:30
Subject: question about virtual memory


I get this message that I am low on virtual memory all the time.
What is that? Why am I low on it? How can I prevent that?

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com