Date   

Re: [Bulk] [Bulk] Removing Older Versions of JFW

Dave...
 

Joni, Marsha, and Adrian,

Good that you all are not experiencing any problems switching back/forth. As
Adrian has observed more than once on this list, the danger appears to be
when removing one of the older versions when newer versions are installed.
By "older" I mean JAWS 9 and lower, "newer" JAWS 10 and above. The change
from VCM (video chain manager) to DCM (display chain manager) seems to set
up a recipe for disaster when VCM is ripped out of the stack.

Have help ready at hand if you try this.

As to disc space -- Unless you still have a 10 Gb hard drive or less I
wouldn't worry about having extra versions of JAWS sitting there.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Thursday, November 17, 2011 06:16
Subject: [Bulk] Re: [Bulk] Re: Removing Older Versions of JFW


Dave, I am not Marsha, but I have swapped between JAWS 5 and 12 with no
problem.

I asked a tech support person at FS about deleting JAWS 4 and 5 just to pick
up a little hard disk space on my computer. She thought it would be best to
keep them because she was afraid it might somehow break the video chain.
Since I am not very adventurous when it comes to computers, I decided not to
delete the older versions.

Joni
----- Original Message -----

Marsha,

Not surprised that JAWS 7 still has capabilities lost in later versions. But
I'd go nuts if I had to switch back that far. Also the video chain strategy
changed since then and I wonder if swapping from 7 to 10 or newer could
cause instability with your system. Do you swap between 7 and something new
like 10, 11, 12, or 13?

Dave Carlson


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] Removing Older Versions of JFW

Joni Colver <earlybird@...>
 

Dave, I am not Marsha, but I have swapped between JAWS 5 and 12 with no
problem.

I asked a tech support person at FS about deleting JAWS 4 and 5 just to pick
up a little hard disk space on my computer. She thought it would be best to
keep them because she was afraid it might somehow break the video chain.
Since I am not very adventurous when it comes to computers, I decided not to
delete the older versions.

Joni

----- Original Message -----

Marsha,

Not surprised that JAWS 7 still has capabilities lost in later versions. But
I'd go nuts if I had to switch back that far. Also the video chain strategy
changed since then and I wonder if swapping from 7 to 10 or newer could
cause instability with your system. Do you swap between 7 and something new
like 10, 11, 12, or 13?

Dave Carlson


Re: [Bulk] Removing Older Versions of JFW

Adrian Spratt
 

I frequently switch between JAWS 9, which came out before the video chain
change, and JAWS 11/12 without consequences.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Farfar on Laptop
Sent: Thursday, November 17, 2011 9:03 AM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Re: Removing Older Versions of JFW

Marsha,

Not surprised that JAWS 7 still has capabilities lost in later versions. But
I'd go nuts if I had to switch back that far. Also the video chain strategy
changed since then and I wonder if swapping from 7 to 10 or newer could
cause instability with your system. Do you swap between 7 and something new
like 10, 11, 12, or 13?

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Marsha" <marcatony@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Thursday, November 17, 2011 05:43
Subject: [Bulk] Re: Removing Older Versions of JFW


HI
I still have Jaws 7 with my XP. Believe it or not, there are still things
I can do with Jaws 7 that I am not able to do with other versions. This is
one reason I don't want to upgrade to Windows 7.

Marsha


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] Putting Jaws to sleep or no speech

Londa Peterson <lpeterson@...>
 

Press insert + space bar then press s. That will turn speech off. It's a
toggle, so just do the same thing to turn speech back on. Hope that helps.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Howard Traxler
Sent: Thursday, November 17, 2011 1:52 AM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Putting Jaws to sleep or no speech

Adrian, I put on keyboard help, then pressed insert plus spacebar. I got a
pair of ascending click tones just like when help was off. Any following
keypress did nothing obvious.

In the past, maybe back to version 8, I could press insert plus control plus

s and get a list of synthesizers (now voice profiles). One of them was no
speech. No speech is not there any more. I thought of creating a new voice

profile which had speech turned off and using it when I wanted braille only;

but I can't figure out how to get it done.

Any further suggestions? Thanks.
Howard
----- Original Message -----
From: "Adrian Spratt" <Adrian@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Wednesday, November 16, 2011 11:50 PM
Subject: RE: [Bulk] Putting Jaws to sleep


It works in JAWS 11. Press insert-1 (the 1 above the letters) to go into
key
identifier mode to confirm. Use the same mode to answer your earlier post.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Howard Traxler
Sent: Thursday, November 17, 2011 12:07 AM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Putting Jaws to sleep

insert spacebar then s gives me a pair of upward clicks; then the s does
nothing. This is version 11.
Howard
----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 10:26 AM
Subject: Re: [Bulk] Putting Jaws to sleep


Marsha,

How about Insert+Spacebar, then the letter "S"? Just remember to do it
again to turn it back on.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay
Area
----- Original Message -----
From: "Marsha" <marcatony@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 07:25
Subject: [Bulk] Putting Jaws to sleep


Hi
How do I put jaws to sleep for an application? I knew how to do it
in the earlier versions; however can't find it in Jaws 12. I want to
play the self-voicing accessible games. Thanks for your help.

Marsha


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] Removing Older Versions of JFW

Dave...
 

Marsha,

Not surprised that JAWS 7 still has capabilities lost in later versions. But
I'd go nuts if I had to switch back that far. Also the video chain strategy
changed since then and I wonder if swapping from 7 to 10 or newer could
cause instability with your system. Do you swap between 7 and something new
like 10, 11, 12, or 13?

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Marsha" <marcatony@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Thursday, November 17, 2011 05:43
Subject: [Bulk] Re: Removing Older Versions of JFW


HI
I still have Jaws 7 with my XP. Believe it or not, there are still things
I can do with Jaws 7 that I am not able to do with other versions. This is
one reason I don't want to upgrade to Windows 7.

Marsha


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] bulk

Dave...
 

Rick,

Which David? You didn't keep the message thread intact. In any case, it's
your or someone's ISP that labels the subject automatically when the content
is suspicious. You can check your ISP if you go to the actual web site for
your mail, and look for spam protection or bulk mail. Since all ISPs are
different I can't be more precise than that.

Personally I just put [bulk] in my JAWS dictionary file and have it speak a
blank space. Then I never hear the annoyance.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Rick Roderick" <rickrod@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Thursday, November 17, 2011 05:11
Subject: [Bulk] bulk


David,

Why do all your messages have [bulk] in the subject line?

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Removing Older Versions of JFW

Marsha <marcatony@...>
 

HI
I still have Jaws 7 with my XP. Believe it or not, there are still things
I can do with Jaws 7 that I am not able to do with other versions. This is
one reason I don't want to upgrade to Windows 7.

Marsha


Re: [Bulk] Putting Jaws to sleep or no speech

Adrian Spratt
 

Howard,

Those tones are exactly what you want to hear. After that, press s. Then,
when in JAWS key identifier mode, you'll be told:

"toggles whether synthesizer is muted."

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Howard Traxler
Sent: Thursday, November 17, 2011 1:52 AM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Putting Jaws to sleep or no speech

Adrian, I put on keyboard help, then pressed insert plus spacebar. I got a
pair of ascending click tones just like when help was off. Any following
keypress did nothing obvious.

In the past, maybe back to version 8, I could press insert plus control plus
s and get a list of synthesizers (now voice profiles). One of them was no
speech. No speech is not there any more. I thought of creating a new voice
profile which had speech turned off and using it when I wanted braille only;
but I can't figure out how to get it done.

Any further suggestions? Thanks.
Howard
----- Original Message -----
From: "Adrian Spratt" <Adrian@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Wednesday, November 16, 2011 11:50 PM
Subject: RE: [Bulk] Putting Jaws to sleep


It works in JAWS 11. Press insert-1 (the 1 above the letters) to go into
key
identifier mode to confirm. Use the same mode to answer your earlier post.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Howard Traxler
Sent: Thursday, November 17, 2011 12:07 AM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Putting Jaws to sleep

insert spacebar then s gives me a pair of upward clicks; then the s does
nothing. This is version 11.
Howard
----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 10:26 AM
Subject: Re: [Bulk] Putting Jaws to sleep


Marsha,

How about Insert+Spacebar, then the letter "S"? Just remember to do it
again to turn it back on.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay
Area
----- Original Message -----
From: "Marsha" <marcatony@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 07:25
Subject: [Bulk] Putting Jaws to sleep


Hi
How do I put jaws to sleep for an application? I knew how to do it
in the earlier versions; however can't find it in Jaws 12. I want to
play the self-voicing accessible games. Thanks for your help.

Marsha


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Removing Older Versions of JFW

Adrian Spratt
 

Tina,

First, instead of removing via add/remove programs in the control panel, go
to the version of JAWS you want in the programs menu. Click on that version
and arrow down to "uninstall." The wizard will take you through the process.

Second, my computer completely crashed when I removed JAWS 8, and I couldn't
get my later versions to read after that. I had to call on a computer
consultant for help, and he couldn't do so from a remote location because my
computer wouldn't boot up far enough. Other listers report similar
experiences when removing 8 and, as I recall, 7. I suggest you call on
sighted Assistance to ensure the versions of JAWS you keep still work after
the uninstall.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of SingingHearts
Sent: Thursday, November 17, 2011 2:05 AM
To: jfw@...
Subject: Removing Older Versions of JFW

Is it possible to remove older versions of JFW without adversely effecting
the current version in use? If so, how? When I try to use the add/remove
feature in the control panel, the installation wizard starts to come up.
Obviously I'm not interested in that since I'm trying to uninstall it.

Perplexed,
Tina C., who's trying to streamline things on her terribly cluttered desktop
PC


--
"And he (Jesus) said, The things which are impossible with men are possible
with God."
Luke 18:27 KJV

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


bulk

Rick Roderick <rickrod@...>
 

David,

Why do all your messages have [bulk] in the subject line?


Re: Word 2007

Rose Combs <rosecombs@...>
 

I notice this in Outlook 2010 also, control backspace just says blank. Very
annoying, if I did not have a braille display I would be even more annoyed
with this.


Rose Combs
rosecombs@Q.com

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Holger Fiallo
Sent: Wednesday, November 16, 2011 4:50 AM
To: The Jaws for Windows support mailing list
Subject: Word 2007

Hello, all
I am using word 2007, jaws 13, window 7 home. When I want to delete a word,
JAWS does not mention the word that I am deleting. In the past word 2003 and
old jaws could do it. Do I need to setup something in jaws?


Holger Fiallo
Kind Regard
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201111
16/7f5c8783/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Fiallo.vcf
Type: application/octet-stream
Size: 75 bytes
Desc: not available
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201111
16/7f5c8783/attachment.obj>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] [Bulk] JAWS 13, and MS WORD'S "word count"

David <davidwhitehead1957@...>
 

Hello there;

Summary: Count the number of words, paragraphs, lines, or pages that make up
your Microsoft Word 2003 document.

Curious to know how many words make up your Microsoft Word 2003 document?
How about pages, paragraphs, or lines? For scholastic types, this
information may be useful if you are doing a book report or essay.
Professional writers or budding columnists may need this information before
sending their works to an editor.

To display the word count, click "Tools" - "Word Count". A "Word Count"
dialog box will appear.

* Note that footnote and endnote text is not tabulated in the word count. To
change this, check "Include footnotes and endnotes".

* Need to keep this information onscreen at all times? Click the "Show
toolbar" button. A "Word Count" toolbar will appear displaying the total
word count. Note that this information will not automatically recalculate -
you must click the "Recount" button for the accurate total. Also, if you
need the line count, page count, etc., just click the toolbar's pull-down to
display all relative information.

Note that you don't have to display the word, paragraph, line, and page
counts for the entire document. You can also select a portion of the
document, then click "Tools" - "Word Count" or click the "Recount" button of
the "Word Count" toolbar if it is visible.

So, using the keyboard,
One would probably alt+t for tools,
And then press w=word-count.
I suspect, you would have to route jaws to pc to read the information.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of David
Sent: Wednesday, November 16, 2011 2:27 PM
To: 'The Jaws for Windows support list.'
Subject: RE: [Bulk] Re: [Bulk] Re: JAWS 13, and MS WORD'S "word count"

Hello there;

Well, the f6key definitely works in word2007, and word2010.




-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Farfar on Laptop
Sent: Wednesday, November 16, 2011 2:04 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Re: [Bulk] Re: JAWS 13, and MS WORD'S "word count"

Kimber,

What version of MS-word?
Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 10:46
Subject: [Bulk] Re: [Bulk] Re: JAWS 13, and MS WORD'S "word count"


Hmm, not sure why it doesn't do that for me.

On 11/16/11, Farfar on Laptop <dgcarlson@...> wrote:
Kimber,

Pressing f6 more than once should route it through 2 or 3 different panes,
including the status bar, document area, and ribbon.
Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 07:05
Subject: [Bulk] Re: JAWS 13, and MS WORD'S "word count"


On 11/16/11, George B <gbmagoo@...> wrote:
open a word doc.
do f6 to you are in the status line
F6 doesn't take me to the status line. The only thing that happens
when I hit f6 in a word document is I hear "document pane."

Kimber

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Kimberly

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Removing Older Versions of JFW

Holger Fiallo <holgerfiallo@...>
 

go to the old one and uninstall. Make sure you do not delete shared components.

-----Original Message-----
From: SingingHearts
Sent: Thursday, November 17, 2011 1:04 AM
To: jfw@...
Subject: Removing Older Versions of JFW

Is it possible to remove older versions of JFW without adversely
effecting the current version in use? If so, how? When I try to use
the add/remove feature in the control panel, the installation wizard
starts to come up. Obviously I'm not interested in that since I'm
trying to uninstall it.

Perplexed,
Tina C., who's trying to streamline things on her terribly cluttered desktop PC


--
"And he (Jesus) said, The things which are impossible with men are
possible with God."
Luke 18:27 KJV

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Holger Fiallo
Kind Regard


Re: [Bulk] [Bulk] JAWS 13, and MS WORD'S "word count"

Kimber Gardner
 

That's the issue, the version of word. At my office we are still using 2003.

K

On 11/16/11, David <davidwhitehead1957@...> wrote:
Hello there;

Well, the f6key definitely works in word2007, and word2010.




-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Farfar on Laptop
Sent: Wednesday, November 16, 2011 2:04 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Re: [Bulk] Re: JAWS 13, and MS WORD'S "word count"

Kimber,

What version of MS-word?
Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 10:46
Subject: [Bulk] Re: [Bulk] Re: JAWS 13, and MS WORD'S "word count"


Hmm, not sure why it doesn't do that for me.

On 11/16/11, Farfar on Laptop <dgcarlson@...> wrote:
Kimber,

Pressing f6 more than once should route it through 2 or 3 different panes,
including the status bar, document area, and ribbon.
Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 07:05
Subject: [Bulk] Re: JAWS 13, and MS WORD'S "word count"


On 11/16/11, George B <gbmagoo@...> wrote:
open a word doc.
do f6 to you are in the status line
F6 doesn't take me to the status line. The only thing that happens
when I hit f6 in a word document is I hear "document pane."

Kimber

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--
Kimberly

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
--
Kimberly


Removing Older Versions of JFW

SingingHearts <singinghearts@...>
 

Is it possible to remove older versions of JFW without adversely
effecting the current version in use? If so, how? When I try to use
the add/remove feature in the control panel, the installation wizard
starts to come up. Obviously I'm not interested in that since I'm
trying to uninstall it.

Perplexed,
Tina C., who's trying to streamline things on her terribly cluttered desktop PC


--
"And he (Jesus) said, The things which are impossible with men are
possible with God."
Luke 18:27 KJV


Re: [Bulk] Putting Jaws to sleep or no speech

Howard Traxler <howard@...>
 

Adrian, I put on keyboard help, then pressed insert plus spacebar. I got a pair of ascending click tones just like when help was off. Any following keypress did nothing obvious.

In the past, maybe back to version 8, I could press insert plus control plus s and get a list of synthesizers (now voice profiles). One of them was no speech. No speech is not there any more. I thought of creating a new voice profile which had speech turned off and using it when I wanted braille only; but I can't figure out how to get it done.

Any further suggestions? Thanks.
Howard

----- Original Message -----
From: "Adrian Spratt" <Adrian@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Wednesday, November 16, 2011 11:50 PM
Subject: RE: [Bulk] Putting Jaws to sleep


It works in JAWS 11. Press insert-1 (the 1 above the letters) to go into key
identifier mode to confirm. Use the same mode to answer your earlier post.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Howard Traxler
Sent: Thursday, November 17, 2011 12:07 AM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Putting Jaws to sleep

insert spacebar then s gives me a pair of upward clicks; then the s does
nothing. This is version 11.
Howard
----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 10:26 AM
Subject: Re: [Bulk] Putting Jaws to sleep


Marsha,

How about Insert+Spacebar, then the letter "S"? Just remember to do it
again to turn it back on.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay
Area
----- Original Message -----
From: "Marsha" <marcatony@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 07:25
Subject: [Bulk] Putting Jaws to sleep


Hi
How do I put jaws to sleep for an application? I knew how to do it
in the earlier versions; however can't find it in Jaws 12. I want to
play the self-voicing accessible games. Thanks for your help.

Marsha


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: What always bothers me when there's an update

soner
 

İt happens not only on texts, but on the display of some pages as well, İ mean they get reformatted in the way more diffrent than the previous versions.


Re: [Bulk] Putting Jaws to sleep

Adrian Spratt
 

It works in JAWS 11. Press insert-1 (the 1 above the letters) to go into key
identifier mode to confirm. Use the same mode to answer your earlier post.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Howard Traxler
Sent: Thursday, November 17, 2011 12:07 AM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Putting Jaws to sleep

insert spacebar then s gives me a pair of upward clicks; then the s does
nothing. This is version 11.
Howard
----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 10:26 AM
Subject: Re: [Bulk] Putting Jaws to sleep


Marsha,

How about Insert+Spacebar, then the letter "S"? Just remember to do it
again to turn it back on.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay
Area
----- Original Message -----
From: "Marsha" <marcatony@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 07:25
Subject: [Bulk] Putting Jaws to sleep


Hi
How do I put jaws to sleep for an application? I knew how to do it
in the earlier versions; however can't find it in Jaws 12. I want to
play the self-voicing accessible games. Thanks for your help.

Marsha


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] Putting Jaws to sleep

Howard Traxler <howard@...>
 

insert spacebar then s gives me a pair of upward clicks; then the s does nothing. This is version 11.
Howard

----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 10:26 AM
Subject: Re: [Bulk] Putting Jaws to sleep


Marsha,

How about Insert+Spacebar, then the letter "S"? Just remember to do it again
to turn it back on.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Marsha" <marcatony@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Wednesday, November 16, 2011 07:25
Subject: [Bulk] Putting Jaws to sleep


Hi
How do I put jaws to sleep for an application? I knew how to do it in the
earlier versions; however can't find it in Jaws 12. I want to play the
self-voicing accessible games. Thanks for your help.

Marsha


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: A Music player

Dondi
 

Hi,

I'm little confused about uploading music files to my library. If I already
have a folder for a artist in the library and there are an album in it with
some songs. How do you add another album to the artist's folder in the
library. I tried to add a folder to library, were I selected the artist name
to upload. I was thinking the album in the artist folder that was already in
my library would be ignored and the new album would be the only thing
upload. But it didn't work like that I ended up with the album that was
already in the library having duplicate songs.

Dondi

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Nickus de Vos
Sent: Friday, November 11, 2011 11:40 AM
To: The Jaws for Windows support list.
Subject: Re: A Music player

I personally don't like winamp, I use itunes. There is itunes scripts
availible but I use mine without any scripts and without any problems.
Apparently the scripts adds a lot of shortcuts but I never needed
anything more than tab, F6, space and the arrow keys. Some people
don't like the way itunes diggs in to your music and rearanges it in a
way but I personally like it and I have about 70 GB of music, If you
have any other questions about itunes just ask.

On 11/11/11, Chris Smart <@ve3rwj> wrote:
vlc, Winamp, iTunes ...

At 01:07 PM 11/11/2011, you wrote:
Hi,



Does anyone have a suggestion for a replacement music player for
Windows
media player? I'm currently using the media player in Windows 7
but it's
kind of annoying when the shuffle is on and it plays the same song
back to
back.



And it's probably a real old thing to ask but can anyone let me
have the
best of the singing JAWS.



Dondi

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/2011
1111/e0be2a24/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING
Clear True Sound
www.ctsmastering.com
and be sure to "like us" on Facebook:
https://www.facebook.com/pages/CTS-Mastering/139114066128698


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com