Date   
Re: how to activate audio in safe mode

Mike & Barbara In Arcadia <mb69mach1@...>
 

HI Dave,

Below is the SendSpace Link for the audio sound in Safe Mode .REG file.

http://www.sendspace.com/file/03tej9

I tested it before posting to make sure it works, but if it doesn't work for
you for whatever reason contact me off list & I'll send you a Dropbox
download link. Take care.
Mike

----- Original Message -----
From: Adrian Spratt
To: 'The Jaws for Windows support list.'
Sent: Tuesday, August 23, 2011 4:51 AM
Subject: RE: how to activate audio in safe mode


Hi, Curtis.

Did you install the program? Did it work as advertised? Did you experience
any new problems with your system?

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of curtis jackson
Sent: Tuesday, August 23, 2011 7:38 AM
To: 'The Jaws for Windows support list.'
Subject: RE: how to activate audio in safe mode

The last time I tried to send it it was a send space link

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of curtis jackson
Sent: Tuesday, August 23, 2011 6:26 AM
To: 'The Jaws for Windows support list.'
Subject: RE: how to activate audio in safe mode

Maybe you can try and contact me off list or the people that did receive
the
files can post it again I can't get it to post on the actual list for some
reason

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Jim J
Sent: Tuesday, August 23, 2011 6:17 AM
To: The Jaws for Windows support list.
Subject: Re: how to activate audio in safe mode

I never received the attached files, either.
----- Original Message -----
From: Dave Durber
To: The Jaws for Windows support list.
Sent: Tuesday, August 23, 2011 6:56 AM
Subject: Re: how to activate audio in safe mode


Hello there:

I forgot to ask in my previous post, whether anyone else had the same
problem in not finding the two attached files to this message.

Because, if other list members did get the attached files, then there
might
be a setting on my system which prevented me from receiving the two
attached
files.

Sincerely:

Dave durber

----- Original Message -----
From: "2.g.i" <2.g.i.84972@...>
To: <Jfw@...>
Sent: Tuesday, August 23, 2011 8:39 PM
Subject: how to activate audio in safe mode


> Hi every body
> for those of you who repair systems & for those who would find this
> helpful.
>
> I have attached 2 text files that when you change the extension to
.reg
&
> run them they will do the following.
>
> 1. Activate Sound in SafeMode
> this will add a set of registry keys to the safe mode tree
> that will enable audio in safe mode, in both safe mode & safe mode
with
> networking.
> Depending on the chipset as to whether the onboard audio will load,
how
> ever the microsoft USB audio will always load, so all you need is a
USB
> headset & use NVDA for the screen reader.
> I have used this on many different chipsets & so far the onboard audio
has
> loaded, but shore there will be a chipset that wont like to play But
as
I
> said the headset is all you need.
> I have used this on XP, W7 32 & 64 bit.
>
> 2. remove Activate Sound in SafeMode.
> this will as it says remove the registry keys once your done if you
want

> to remove them.
>
> I hope a lot of you find this helpful & please pass this onto all your
VIP
> techy friends.
>
> -------------- next part --------------
> An embedded and charset-unspecified text was scrubbed...
> Name: Activate Sound in SafeMode.txt
> URL:
>
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment.txt>
> -------------- next part --------------
> An embedded and charset-unspecified text was scrubbed...
> Name: remove Activate Sound in SafeMode.txt
> URL:
>
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment-0001.txt>
> _______________________________________________
> Jfw mailing list
> Jfw@...
> http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/1dbfd5b3/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110823/518a2e02/attachment.html>

Re: Thunderbird + JAWS 12 help needed

David <davidwhitehead1957@...>
 

Hello there;

You didn't say which version of thunder bird, there are some jaws scripts
out their, which will help
The user navigate the program.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Deddajay
Sent: Monday, August 22, 2011 7:50 PM
To: jfw@...
Subject: Thunderbird + JAWS 12 help needed

Hello

This is my first post to this list, so please bear with me as I'm not
sure if this is a Jaws problem or a Thunderbird issue.

I am a sighted user trying to learn Jaws in order to help my blind
husband. We have just migrated him to using Windows 7, Jaws 12 and
Thunderbird. He's only been using Jaws for a few months, so it is a
steep learning curve for both of us.

We are getting confused regarding the different cursors and how they
work. Using Virtual PC cursor, emails are opened and read fine with a
brief heading and then into the main body of the email, but the
navigation short cut keys - P, N, B and F don't work. Using PC cursor,
the navigation keys work fine, but Jaws announces the title of each
individual email along the lines of "mailbox:
///name/users/name/AppData/Roaming/Thunderbird/profiles/ etc etc. "
before getting to the message. This gets a bit tiresome when there's a
full inbox to go through.

Could someone please give me some pointers as to what settings I should
be using so that the title bar is not read each time and the PC cursor
can be used for navigation? At the moment we are using the Virtual PC
cursor, which means having to open and close each individual email when
moving through a list.

I'd be grateful for any help, including advice if this has been posted
to the wrong list.

Thanks
Deddajay



_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: Problem with MAGic and JAWS

David <davidwhitehead1957@...>
 

Hello there;

I would make sure that,

You have the latest display drivers,
Also, I would uninstall both and reinstall.

I would remove shared files.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Londa Peterson
Sent: Monday, August 22, 2011 4:03 PM
To: 'The Jaws for Windows support list.'
Subject: Problem with MAGic and JAWS

This may be borderline for this list. If the it is considered off topic, I
apologize, and I'll take it to another list. I have a client who has a
Toshiba netbook running Win 7. She recently sent it to Toshiba because it
had a bad hard drive which needed to be replaced. She reinstalled JAWS and
MAGIC, and everything seemed to be fine for a while. the problem came when
she installed the daisy training materials. After she did this, MAGic would
not run. It kept saying that the MAGic engine could not start. Freedom
Scientific is telling her that the problem needs to be fixed by Toshiba.
Toshiba is saying that it needs to be fixed by freedom Scientific. My first
thought is to uninstall MAGic, including shared files, and then reinstall
it. My questions are:



1. Will her JAWS survive this process, or will I have to reinstall it too?

Does anyone out there have any other ideas of things I could try in order to
get MAGic working again?



As far as I know she is running the latest versions of both products. If
she's not, she will be when I'm done working on the machine. Any help would
be appreciated.



-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
22/73a98da5/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: how to activate audio in safe mode

Adrian Spratt
 

Hi, Curtis.

Did you install the program? Did it work as advertised? Did you experience
any new problems with your system?

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of curtis jackson
Sent: Tuesday, August 23, 2011 7:38 AM
To: 'The Jaws for Windows support list.'
Subject: RE: how to activate audio in safe mode

The last time I tried to send it it was a send space link

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of curtis jackson
Sent: Tuesday, August 23, 2011 6:26 AM
To: 'The Jaws for Windows support list.'
Subject: RE: how to activate audio in safe mode

Maybe you can try and contact me off list or the people that did receive the
files can post it again I can't get it to post on the actual list for some
reason

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Jim J
Sent: Tuesday, August 23, 2011 6:17 AM
To: The Jaws for Windows support list.
Subject: Re: how to activate audio in safe mode

I never received the attached files, either.
----- Original Message -----
From: Dave Durber
To: The Jaws for Windows support list.
Sent: Tuesday, August 23, 2011 6:56 AM
Subject: Re: how to activate audio in safe mode


Hello there:

I forgot to ask in my previous post, whether anyone else had the same
problem in not finding the two attached files to this message.

Because, if other list members did get the attached files, then there
might
be a setting on my system which prevented me from receiving the two
attached
files.

Sincerely:

Dave durber

----- Original Message -----
From: "2.g.i" <2.g.i.84972@...>
To: <Jfw@...>
Sent: Tuesday, August 23, 2011 8:39 PM
Subject: how to activate audio in safe mode


> Hi every body
> for those of you who repair systems & for those who would find this
> helpful.
>
> I have attached 2 text files that when you change the extension to .reg
&
> run them they will do the following.
>
> 1. Activate Sound in SafeMode
> this will add a set of registry keys to the safe mode tree
> that will enable audio in safe mode, in both safe mode & safe mode with
> networking.
> Depending on the chipset as to whether the onboard audio will load, how
> ever the microsoft USB audio will always load, so all you need is a USB
> headset & use NVDA for the screen reader.
> I have used this on many different chipsets & so far the onboard audio
has
> loaded, but shore there will be a chipset that wont like to play But as
I
> said the headset is all you need.
> I have used this on XP, W7 32 & 64 bit.
>
> 2. remove Activate Sound in SafeMode.
> this will as it says remove the registry keys once your done if you want

> to remove them.
>
> I hope a lot of you find this helpful & please pass this onto all your
VIP
> techy friends.
>
> -------------- next part --------------
> An embedded and charset-unspecified text was scrubbed...
> Name: Activate Sound in SafeMode.txt
> URL:
>
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment.txt>
> -------------- next part --------------
> An embedded and charset-unspecified text was scrubbed...
> Name: remove Activate Sound in SafeMode.txt
> URL:
>
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment-0001.txt>
> _______________________________________________
> Jfw mailing list
> Jfw@...
> http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/1dbfd5b3/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: how to activate audio in safe mode

Peter Holdstock <peterholdstock@...>
 

Nope I had the same problem.

peter





1. <a href= 'http://www.justgiving.com/Peter-Holdstock' alt='JustGiving - Sponsor me now!' target='_blank'><img src='http://www.justgiving.com/App_Themes/JustGiving/images/badges/badge10.gif' width='270' height='50'></a>

2. <a href='http://www.justgiving.com/Peter-Holdstock' alt='JustGiving - Sponsor me now!' target='_blank'><img src='http://www.justgiving.com/App_Themes/JustGiving/images/badges/badge9.gif' width='120' height='90'></a>

3. <a href='http://www.justgiving.com/Peter-Holdstock' alt='JustGiving - Sponsor me now!' target='_blank'><img src='http://www.justgiving.com/App_Themes/JustGiving/images/badges/badge5.gif' width='150' height='85'></a>





Peter

-----Original Message-----
From: Dave Durber
Sent: Tuesday, August 23, 2011 11:56 AM
To: The Jaws for Windows support list.
Subject: Re: how to activate audio in safe mode

Hello there:

I forgot to ask in my previous post, whether anyone else had the same
problem in not finding the two attached files to this message.

Because, if other list members did get the attached files, then there might
be a setting on my system which prevented me from receiving the two attached
files.

Sincerely:

Dave durber

----- Original Message -----
From: "2.g.i" <2.g.i.84972@...>
To: <Jfw@...>
Sent: Tuesday, August 23, 2011 8:39 PM
Subject: how to activate audio in safe mode


Hi every body
for those of you who repair systems & for those who would find this helpful.

I have attached 2 text files that when you change the extension to .reg & run them they will do the following.

1. Activate Sound in SafeMode
this will add a set of registry keys to the safe mode tree
that will enable audio in safe mode, in both safe mode & safe mode with networking.
Depending on the chipset as to whether the onboard audio will load, how ever the microsoft USB audio will always load, so all you need is a USB headset & use NVDA for the screen reader.
I have used this on many different chipsets & so far the onboard audio has loaded, but shore there will be a chipset that wont like to play But as I said the headset is all you need.
I have used this on XP, W7 32 & 64 bit.

2. remove Activate Sound in SafeMode.
this will as it says remove the registry keys once your done if you want to remove them.

I hope a lot of you find this helpful & please pass this onto all your VIP techy friends.

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Activate Sound in SafeMode.txt
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110823/e83f073b/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: remove Activate Sound in SafeMode.txt
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110823/e83f073b/attachment-0001.txt>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: how to activate audio in safe mode

curtis jackson
 

The last time I tried to send it it was a send space link

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of curtis jackson
Sent: Tuesday, August 23, 2011 6:26 AM
To: 'The Jaws for Windows support list.'
Subject: RE: how to activate audio in safe mode

Maybe you can try and contact me off list or the people that did receive the
files can post it again I can't get it to post on the actual list for some
reason

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Jim J
Sent: Tuesday, August 23, 2011 6:17 AM
To: The Jaws for Windows support list.
Subject: Re: how to activate audio in safe mode

I never received the attached files, either.
----- Original Message -----
From: Dave Durber
To: The Jaws for Windows support list.
Sent: Tuesday, August 23, 2011 6:56 AM
Subject: Re: how to activate audio in safe mode


Hello there:

I forgot to ask in my previous post, whether anyone else had the same
problem in not finding the two attached files to this message.

Because, if other list members did get the attached files, then there
might
be a setting on my system which prevented me from receiving the two
attached
files.

Sincerely:

Dave durber

----- Original Message -----
From: "2.g.i" <2.g.i.84972@...>
To: <Jfw@...>
Sent: Tuesday, August 23, 2011 8:39 PM
Subject: how to activate audio in safe mode


> Hi every body
> for those of you who repair systems & for those who would find this
> helpful.
>
> I have attached 2 text files that when you change the extension to .reg
&
> run them they will do the following.
>
> 1. Activate Sound in SafeMode
> this will add a set of registry keys to the safe mode tree
> that will enable audio in safe mode, in both safe mode & safe mode with
> networking.
> Depending on the chipset as to whether the onboard audio will load, how
> ever the microsoft USB audio will always load, so all you need is a USB
> headset & use NVDA for the screen reader.
> I have used this on many different chipsets & so far the onboard audio
has
> loaded, but shore there will be a chipset that wont like to play But as
I
> said the headset is all you need.
> I have used this on XP, W7 32 & 64 bit.
>
> 2. remove Activate Sound in SafeMode.
> this will as it says remove the registry keys once your done if you want

> to remove them.
>
> I hope a lot of you find this helpful & please pass this onto all your
VIP
> techy friends.
>
> -------------- next part --------------
> An embedded and charset-unspecified text was scrubbed...
> Name: Activate Sound in SafeMode.txt
> URL:
>
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment.txt>
> -------------- next part --------------
> An embedded and charset-unspecified text was scrubbed...
> Name: remove Activate Sound in SafeMode.txt
> URL:
>
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment-0001.txt>
> _______________________________________________
> Jfw mailing list
> Jfw@...
> http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/1dbfd5b3/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: how to activate audio in safe mode

curtis jackson
 

Maybe you can try and contact me off list or the people that did receive the
files can post it again I can't get it to post on the actual list for some
reason

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Jim J
Sent: Tuesday, August 23, 2011 6:17 AM
To: The Jaws for Windows support list.
Subject: Re: how to activate audio in safe mode

I never received the attached files, either.
----- Original Message -----
From: Dave Durber
To: The Jaws for Windows support list.
Sent: Tuesday, August 23, 2011 6:56 AM
Subject: Re: how to activate audio in safe mode


Hello there:

I forgot to ask in my previous post, whether anyone else had the same
problem in not finding the two attached files to this message.

Because, if other list members did get the attached files, then there
might
be a setting on my system which prevented me from receiving the two
attached
files.

Sincerely:

Dave durber

----- Original Message -----
From: "2.g.i" <2.g.i.84972@...>
To: <Jfw@...>
Sent: Tuesday, August 23, 2011 8:39 PM
Subject: how to activate audio in safe mode


> Hi every body
> for those of you who repair systems & for those who would find this
> helpful.
>
> I have attached 2 text files that when you change the extension to .reg
&
> run them they will do the following.
>
> 1. Activate Sound in SafeMode
> this will add a set of registry keys to the safe mode tree
> that will enable audio in safe mode, in both safe mode & safe mode with
> networking.
> Depending on the chipset as to whether the onboard audio will load, how
> ever the microsoft USB audio will always load, so all you need is a USB
> headset & use NVDA for the screen reader.
> I have used this on many different chipsets & so far the onboard audio
has
> loaded, but shore there will be a chipset that wont like to play But as
I
> said the headset is all you need.
> I have used this on XP, W7 32 & 64 bit.
>
> 2. remove Activate Sound in SafeMode.
> this will as it says remove the registry keys once your done if you want

> to remove them.
>
> I hope a lot of you find this helpful & please pass this onto all your
VIP
> techy friends.
>
> -------------- next part --------------
> An embedded and charset-unspecified text was scrubbed...
> Name: Activate Sound in SafeMode.txt
> URL:
>
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment.txt>
> -------------- next part --------------
> An embedded and charset-unspecified text was scrubbed...
> Name: remove Activate Sound in SafeMode.txt
> URL:
>
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment-0001.txt>
> _______________________________________________
> Jfw mailing list
> Jfw@...
> http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/1dbfd5b3/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: how to activate audio in safe mode

Jim J <cassie1110@...>
 

I never received the attached files, either.

----- Original Message -----
From: Dave Durber
To: The Jaws for Windows support list.
Sent: Tuesday, August 23, 2011 6:56 AM
Subject: Re: how to activate audio in safe mode


Hello there:

I forgot to ask in my previous post, whether anyone else had the same
problem in not finding the two attached files to this message.

Because, if other list members did get the attached files, then there might
be a setting on my system which prevented me from receiving the two attached
files.

Sincerely:

Dave durber

----- Original Message -----
From: "2.g.i" <2.g.i.84972@...>
To: <Jfw@...>
Sent: Tuesday, August 23, 2011 8:39 PM
Subject: how to activate audio in safe mode


> Hi every body
> for those of you who repair systems & for those who would find this
> helpful.
>
> I have attached 2 text files that when you change the extension to .reg &
> run them they will do the following.
>
> 1. Activate Sound in SafeMode
> this will add a set of registry keys to the safe mode tree
> that will enable audio in safe mode, in both safe mode & safe mode with
> networking.
> Depending on the chipset as to whether the onboard audio will load, how
> ever the microsoft USB audio will always load, so all you need is a USB
> headset & use NVDA for the screen reader.
> I have used this on many different chipsets & so far the onboard audio has
> loaded, but shore there will be a chipset that wont like to play But as I
> said the headset is all you need.
> I have used this on XP, W7 32 & 64 bit.
>
> 2. remove Activate Sound in SafeMode.
> this will as it says remove the registry keys once your done if you want
> to remove them.
>
> I hope a lot of you find this helpful & please pass this onto all your VIP
> techy friends.
>
> -------------- next part --------------
> An embedded and charset-unspecified text was scrubbed...
> Name: Activate Sound in SafeMode.txt
> URL:
> <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110823/e83f073b/attachment.txt>
> -------------- next part --------------
> An embedded and charset-unspecified text was scrubbed...
> Name: remove Activate Sound in SafeMode.txt
> URL:
> <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110823/e83f073b/attachment-0001.txt>
> _______________________________________________
> Jfw mailing list
> Jfw@...
> http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110823/1dbfd5b3/attachment.html>

Re: how to activate audio in safe mode

Adrian Spratt
 

James' former list host, Freelists, did not allow attachments to go through.
He hasn't reported the same limitation on the current host, but I'm guessing
it applies, too. This is one reason why people provide DropBox or Sendspace
addresses for listers to obtain files.

I'm assuming this is the same sounds in safe mode file that we were alerted
to earlier this month. Several of us looked into it and couldn't verify its
reliability and safety. I, for one, will not be installing it.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Dave Durber
Sent: Tuesday, August 23, 2011 6:57 AM
To: The Jaws for Windows support list.
Subject: Re: how to activate audio in safe mode

Hello there:

I forgot to ask in my previous post, whether anyone else had the same
problem in not finding the two attached files to this message.

Because, if other list members did get the attached files, then there might
be a setting on my system which prevented me from receiving the two attached
files.

Sincerely:

Dave durber

----- Original Message -----
From: "2.g.i" <2.g.i.84972@...>
To: <Jfw@...>
Sent: Tuesday, August 23, 2011 8:39 PM
Subject: how to activate audio in safe mode


Hi every body
for those of you who repair systems & for those who would find this
helpful.

I have attached 2 text files that when you change the extension to .reg &
run them they will do the following.

1. Activate Sound in SafeMode
this will add a set of registry keys to the safe mode tree
that will enable audio in safe mode, in both safe mode & safe mode with
networking.
Depending on the chipset as to whether the onboard audio will load, how
ever the microsoft USB audio will always load, so all you need is a USB
headset & use NVDA for the screen reader.
I have used this on many different chipsets & so far the onboard audio has
loaded, but shore there will be a chipset that wont like to play But as I
said the headset is all you need.
I have used this on XP, W7 32 & 64 bit.

2. remove Activate Sound in SafeMode.
this will as it says remove the registry keys once your done if you want
to remove them.

I hope a lot of you find this helpful & please pass this onto all your VIP
techy friends.

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Activate Sound in SafeMode.txt
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: remove Activate Sound in SafeMode.txt
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment-0001.txt>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: how to activate audio in safe mode

Dave Durber
 

Hello there:

I forgot to ask in my previous post, whether anyone else had the same problem in not finding the two attached files to this message.

Because, if other list members did get the attached files, then there might be a setting on my system which prevented me from receiving the two attached files.

Sincerely:

Dave durber

----- Original Message -----
From: "2.g.i" <2.g.i.84972@...>
To: <Jfw@...>
Sent: Tuesday, August 23, 2011 8:39 PM
Subject: how to activate audio in safe mode


Hi every body
for those of you who repair systems & for those who would find this helpful.

I have attached 2 text files that when you change the extension to .reg & run them they will do the following.

1. Activate Sound in SafeMode
this will add a set of registry keys to the safe mode tree
that will enable audio in safe mode, in both safe mode & safe mode with networking.
Depending on the chipset as to whether the onboard audio will load, how ever the microsoft USB audio will always load, so all you need is a USB headset & use NVDA for the screen reader.
I have used this on many different chipsets & so far the onboard audio has loaded, but shore there will be a chipset that wont like to play But as I said the headset is all you need.
I have used this on XP, W7 32 & 64 bit.

2. remove Activate Sound in SafeMode.
this will as it says remove the registry keys once your done if you want to remove them.

I hope a lot of you find this helpful & please pass this onto all your VIP techy friends.

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Activate Sound in SafeMode.txt
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110823/e83f073b/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: remove Activate Sound in SafeMode.txt
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110823/e83f073b/attachment-0001.txt>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: how to activate audio in safe mode

curtis jackson
 

Not sure why this is happening

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Dave Durber
Sent: Tuesday, August 23, 2011 5:42 AM
To: The Jaws for Windows support list.
Subject: Re: how to activate audio in safe mode

Hello there:

I would loved to have used the files you say were attached to your email
message.

Unfortunately, the attached text files you talk about in your email do not
appear to have either been attached or, they were rejected by the JFW list
email server or, by some other method.

Could it be that the email server which is being used to host this list,
does not allow attachments, or, is it that the owners/administrators of this

list, have turned off the function which would allow attachments.

Below the last line of your email message, the following information was
displayed.

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Activate Sound in SafeMode.txt
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: remove Activate Sound in SafeMode.txt
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment-0001.txt>

In addition, the following information was displayed when I activated one of

the links:

Forbidden

You don't have permission to access
/pipermail/jfw_lists.the-jdh.com/attachments/20110823/e83f073b/attachment.tx
t>
on this server.
Additionally, a 404 Not Found error was encountered while trying to use an
ErrorDocument to handle the request

Sincerely:

Dave Durber

----- Original Message -----
From: "2.g.i" <2.g.i.84972@...>
To: <Jfw@...>
Sent: Tuesday, August 23, 2011 8:39 PM
Subject: how to activate audio in safe mode


Hi every body
for those of you who repair systems & for those who would find this
helpful.

I have attached 2 text files that when you change the extention to .reg &
run them they will do the following.

1. Activate Sound in SafeMode
this will add a set of registry keys to the safe mode tree
that will enable audio in safe mode, in both safe mode & safe mode with
networking.
Depending on the chipset as to whether the onboard audio will load, how
ever the microsoft USB audio will always load, so all you need is a USB
headset & use NVDA for the screen reader.
I have used this on many different chipsets & so far the onboard audio has
loaded, but shore there will be a chipset that wont like to play But as I
said the headset is all you need.
I have used this on XP, W7 32 & 64 bit.

2. remove Activate Sound in SafeMode.
this will as it says remove the registry keys once your done if you want
to remove them.

I hope a lot of you find this helpful & please pass this onto all your VIP
techy friends.

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Activate Sound in SafeMode.txt
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: remove Activate Sound in SafeMode.txt
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/201108
23/e83f073b/attachment-0001.txt>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

ARTIVA software ontario software

Donald Nelson <dnelson1175@...>
 

If anyone has information on how compatible Jaws is with Artiva
software made by Ontario systems are, I would be grateful to hear from
you.
Don

Re: how to activate audio in safe mode

Dave Durber
 

Hello there:

I would loved to have used the files you say were attached to your email message.

Unfortunately, the attached text files you talk about in your email do not appear to have either been attached or, they were rejected by the JFW list email server or, by some other method.

Could it be that the email server which is being used to host this list, does not allow attachments, or, is it that the owners/administrators of this list, have turned off the function which would allow attachments.

Below the last line of your email message, the following information was displayed.

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Activate Sound in SafeMode.txt
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110823/e83f073b/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: remove Activate Sound in SafeMode.txt
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110823/e83f073b/attachment-0001.txt>

In addition, the following information was displayed when I activated one of the links:

Forbidden

You don't have permission to access /pipermail/jfw_lists.the-jdh.com/attachments/20110823/e83f073b/attachment.txt> on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request

Sincerely:

Dave Durber

----- Original Message -----
From: "2.g.i" <2.g.i.84972@...>
To: <Jfw@...>
Sent: Tuesday, August 23, 2011 8:39 PM
Subject: how to activate audio in safe mode


Hi every body
for those of you who repair systems & for those who would find this helpful.

I have attached 2 text files that when you change the extention to .reg & run them they will do the following.

1. Activate Sound in SafeMode
this will add a set of registry keys to the safe mode tree
that will enable audio in safe mode, in both safe mode & safe mode with networking.
Depending on the chipset as to whether the onboard audio will load, how ever the microsoft USB audio will always load, so all you need is a USB headset & use NVDA for the screen reader.
I have used this on many different chipsets & so far the onboard audio has loaded, but shore there will be a chipset that wont like to play But as I said the headset is all you need.
I have used this on XP, W7 32 & 64 bit.

2. remove Activate Sound in SafeMode.
this will as it says remove the registry keys once your done if you want to remove them.

I hope a lot of you find this helpful & please pass this onto all your VIP techy friends.

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Activate Sound in SafeMode.txt
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110823/e83f073b/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: remove Activate Sound in SafeMode.txt
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110823/e83f073b/attachment-0001.txt>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: Google Instant

Peter Holdstock <peterholdstock@...>
 

Could you have ever perhaps set up some individual JAWS settings using INSERT SHIFT V with Google. Perhaps try using that keyboard shortcut and see if auto forms mode is on when your in those settings and change it that way, or completely remove your specific settings for google.

Peter

-----Original Message-----
From: Robert Logue
Sent: Tuesday, August 23, 2011 4:19 AM
To: The Jaws for Windows support mailing list
Subject: Google Instant

I often need to turn this off. Probably because I clear my cookies
frequently. Google Instant keeps turning forms mode off as I'm typing even
though I have Jaws forms mode set to manual. Jaws 11. Haven't tried with
12.

Bob





_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re:

Kerri <shalom75@...>
 

Hi, bill, I can't go to walgrene's for you.

Jesus is the author of connection. Satan is the author of isolation. The
more our enemy takes us captive, the further we distance ourselves from
healthy people. - Beth Moore

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Bill Spiry
Sent: Tuesday, August 09, 2011 6:09 PM
To: Jfw@...
Subject:

hhey kiddo, could you ddrop by walgreens and pick up my script for vyvaance
on the way over?

Bill Spiry
Sent from my iPhone
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Using AVG Security 2011 with JAWS

Tony Schnurr
 

Hello,

I would like to hear from anyone who has tried using the new AVG Internet
Security 2011 with JAWS.
I am using the latest build of JAWS 12. Before upgrading from AVG 9 to AVG
2011; I would like to hear the experiences of those who have tried this
version of AVG. I am not looking for any specific guidance on using this
product. I am simply wanting to confirm whether or not this latest version
is still accessible using JAWS.

Thanks.

Regards.

Tony

Re: Eudora (was another question about programs that work with JFW)

Robert Logue <bobcat11@...>
 

Thanks Ben for this very valuable and helpful information. I'm going to take advantage of it rather than mess around with stuff others are having trouble with on Windows 7.

Bob

----- Original Message -----
From: "Ben Humphreys" <brh@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, August 21, 2011 6:34 PM
Subject: Re: Eudora (was another question about programs that work with JFW)


Bill,

While Eudora lives on in open-source, the last version produced by Qualcom is Eudora 7.1.0.9 and that version is very accessible with JAWS, something that I do not believe is true of the newer open-source versions.

Happily, Eudora 7.1.0.9 works fine with Windows 7 and Qualcom has graciously provided the following code to unlock the full mode without cost:

RegFirstNamePro= Paid_Mode_No_Support
RegLastNamePro=Without_X1_Search
RegCodePro=4352-4846-7641-3881

You may download Eudora from

* http://www.eudora.com/cgi-bin/export.cgi?productid=EUDORA_win_7109

Ben

At 02:40 PM 8/21/2011, you wrote:
Hello,
I now have JFW 12 on my computer and am running windows 7. I was wondering about eudorah. if they still have a free mail program and do they have a version that works with Windows 7?
I used to use it back in the days of Dos.
Thanks in advance.
Bill Deatherage
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20110821/1570485d/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Re: [Bulk] Transferring Alt Control J shortcut fromJaws11toJaws12

robert hebert <roberthebert@...>
 

It is possible that in some cases your hot key of "control-alt-j" is opening
the earlier version/build of Jaws and not the currently installed one. Check
this with insert (jaws key) j--options sub menu, arrow up to about and press
enter. This will confirm which build of Jaws your hot key is opening.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Adrian Spratt
Sent: August-22-11 2:36 PM
To: 'The Jaws for Windows support list.'
Subject: RE: [Bulk] Re: Transferring Alt Control J shortcut
fromJaws11toJaws12

Gerald,

We shouldn't be framing this question as an argument. You're very accurate
in your posts, as are those who describe the opposite experience. To me, it
makes sense for FS to create the hotkey automatically because, as this
thread shows, doing it on our own can be vexing. So I wonder how it is that
your versions of JAWS save you the trouble while mine, for one, puts the
burden on me.

The drawback of having the manufacturer create the hotkey is the possibility
of conflict with an existing one. For example, your OpenBook hotkey would
conflict with my Outlook hotkey.

I wonder if anyone can suggest why different systems get or don't get the
automatic alt-control-j hotkey.
-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Gerald Levy
Sent: Monday, August 22, 2011 4:45 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut
fromJaws11toJaws12


Then how do you explain the fact that my version of JAWS 9 had the hot key
of Alt-Control-J when it was originally installed? I did not assign this
hot key myself, and Hot Key Detective confirmed that it was not
user-assigned. Hot Key Detective designates user-defined hot keys as
"personal" and system or program-assigned hot keys as "common".
Alt-Control-J was designated as "common", which means that it was not
user-assigned. So where did it come from? And how do you explain the fact
that When Open Book 7 was installed, it was assigned the hot key
Alt-Control-O? Again, I didn't assign it myself.

Gerald


----- Original Message -----
From: "Dave Durber" <d.durber@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Monday, August 22, 2011 3:30 PM
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut fromJaws
11toJaws12


Gerald:

When I recently reinstalled Windows XP Pro on my computer and
installed JAWS 9, the JAWS installation program did not, I repeat, did
not, assign
CTRL+ALT+J or, any other shortcut key combination to JAWS 9.

Likewise, when I installed JAWS 10, 11, and 12, none of the
installation programs for any of those versions did not, again I
repeat, did not, assign any shortcut key.

Finally, before posting my response to your last posting, I called FS
Tech Support to clarify this point.

The Tech Support Representative, when I ask them if JAWS assigns a
shortcut key automatically during the installation process or not,
said that the JAWS installation program does not assign any shortcut
key to the newly installed version of JAWS. They went on to say that
JAWS might delete an assigned shortcut key. when you use the Repair JAWS
function.

HTH

Sincerely:

Dave Durber

----- Original Message -----
From: "Gerald Levy" <bwaylimited@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Monday, August 22, 2011 12:46 PM
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut fromJaws
11toJaws12



Not necessarily. Assuming JAWS 11 is the latest version installed on
your computer, it was automatically assigned the hot key
Alt-Control-J when it was originally installed. Unless you delete
this "hidden" hot key, it will always launch JAWS 11, even if you
create the user-defined hot key Alt-Control-J for JAWS 10. As a
rule, hot keys automatically assigned by an application take
precedence over hot keys defined by the user. You can use Hot Key
Detective to determine whether a particular hot key is application
assigned or user assigned. When I installed the demo version of JAWS
10, Alt-Control-J, which had been created automatically when I
originally installed JAWS 9, was automatically reassigned to JAWS 10.
In order to reassign Alt-Control-J back to JAWS 9, my default version
of JAWS, I had to use Hot Key Detective to delete Alt-Control-J from
JAWS 10 and then use the Properties dialog of JAWS 9 to re-create it as a
user-assigned hot key.

Gerald


----- Original Message -----
From: "Dave Durber" <d.durber@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Monday, August 22, 2011 12:02 PM
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut from Jaws
11toJaws12


Karen:

Yesterday, if you remember, I assigned CTRL+ALT+J to JAWS 10 first
and then JAWS 11. I then unloaded JAWS 10 and pressed the shortcut
key combination to see which version of JAWS Windows would launch.
In that instance, JAWS 11 was launched over JAWS 10.

Following your comments in your reply, I reversed the actions of my
experiment, to see whether Windows reversed its action, that is,
launch JAWS 10 over JAWS11.

I first deleted the CTRL+ALT+J shortcut key combination for JAWS 10
and JAWS 11.

I then assigned the shortcut key to JAWS 11 first and did the same
with JAWS 10.

I then unloaded JAWS 10 and pressed CTRL+ALT+J and waited to see
which version of JAWS would be loaded.

Well, surprise, surprise, Windows did reverse its action and
launched JAWS 10 over JAWS 11.

It appears that if you assign the same shortcut key to more than one
application, Windows will launch the last program to which you
assigned the shortcut key combination, that is, the application
which has the latest updated date and time stamps.

HTH

Sincerely:

Dave Durber

----- Original Message -----
From: "Karen Hughes" <khughes8@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Monday, August 22, 2011 8:24 AM
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut from
Jaws
11toJaws12


dave if yuou assign a short cut then do the same action again using
a different version of jaws. would it not react to the last
request. this would eliminate the first request of the same thing. just
a thought.
please advise, karen

----- Original Message -----
From: "Dave Durber" <d.durber@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, August 21, 2011 10:55 AM
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut from
Jaws 11toJaws 12


Dave and everyone:

From what I can tell, the JAWS installation does not automatically
assign CTRL+ALT+J, as a short cut to start JAWS.

I was using JAWS 10 at the time. As an experiment, I assigned
CTRL+ALT+J, to both JAWS 10 and 11. Windows did not complain
CTRL+ALT+that I
had assigned the short cut to two applications. I unloaded JAWS
10 and press CTRL+ALT+J and waited to see which version of JAWS
would be loaded. Well, in my example, JAWS 11 was loaded.

It would help, if Windows allowed only one occurrence of a short
cut key combination to be allowed to launch a program. So, if you
tried to assign a short cut combination that was already assigned
to a program to another program, Windows would tell you that this
was the case and give you another opportunity to choose another
short cut combination for the other program.

Sincerely:

Dave Durber

----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, August 20, 2011 10:44 AM
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut from
Jaws
11 toJaws 12


Mike,

Not quite.

Checking the "Start JAWS automatically" just ensure that JAWS
will start up on boot of the computer.

When installing a new version (say from 11 to 12) a shortcut will
be added to the desktop with the version number (e.g. JAWS 12)
and it may or may not have the Ctrl+alt+J keystroke assigned.

If you have more than one major version of JAWS (9, 10, 11, 12)
you could end up with a desktop shortcut for each, and usually
the first one with the hotkey.

Users like Tom need to edit the shortcut preferences for the old
version and the new to ensure that only one has the hotkey
assigned.

Dave Carlson
From my Dell Latitude 630, currently not nearly close enough for
my comfort to my Audio Recording and Mixing Studios, San
Francisco Bay Area. But I'll try to remedy that situation.

----- Original Message -----
From: "Mike & Barbara In Arcadia" <mb69mach1@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, August 20, 2011 5:14
Subject: [Bulk] Re: Transferring Alt Control J shortcut from Jaws
11 to Jaws
12


Hi Tom,

There is no need to transfer the alt, control, + J, keystroke.
That is the default shortcut keystroke for all versions of Jaws.
What you need to do is go to the Jaws12 context menu / options /
basics and check the box to have
Jaws12 start automatically. By checking this box in any version
of Jaws, tells Jaws to use this particular keystroke as the
shortcut keystroke. Hope this helps. Take care.
Mike

----- Original Message -----
From: Tom Behler
To: Jaws users e-mail list
Sent: Saturday, August 20, 2011 12:17 AM
Subject: Transferring Alt Control J shortcut from Jaws 11 to
Jaws 12


Hi, again.

I just thought of one more question here.

What is the best way to transfer the Alt Control J shortcut to
Jaws
12
from
Jaws 11, when doing the upgrade process?

I seem to recall having a problem with this once before in
earlier upgrades, and can't remember how to resolve it.

All I remember is that I had great difficulty transferring the
shortcut over to the new version of Jaws from the earlier
version.

I would have thought that the "merge utilities" function would
have taken care of this, but it didn't in my earlier upgrade
efforts.

Thanks for putting up with all my questions lately.

Tom in Michigan



_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part -------------- An HTML attachment was
scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachm
ents/20110820/665b7f1d/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

Google Instant

Robert Logue <bobcat11@...>
 

I often need to turn this off. Probably because I clear my cookies frequently. Google Instant keeps turning forms mode off as I'm typing even though I have Jaws forms mode set to manual. Jaws 11. Haven't tried with 12.

Bob

Re: [Bulk] [hot key detective was Bulk] Transferring AltControl Jshortcut fromJaws 11toJaws12

Robert Logue <bobcat11@...>
 

Version I have of Hotkey Detective is not exactly free.
Read this:
http://www.pcmag.com/article2/0,2817,5082,00.asp

There appear to be free versions and alternatives when I Google Hotkey Detective. Don't know how they compare as far as screen reader accessibility or security. Don't know how it works with Windows 7.

Bob

BTW: For a new topic; screen reader users click here to turn off Google instant! This is a pain when I clear my cookies frequently.

----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Monday, August 22, 2011 8:06 PM
Subject: Re: [Bulk] RE: [hot key detective was Bulk] Re: Transferring AltControl Jshortcut fromJaws 11toJaws12


Alex, Finding things on Google is second nature. Chris is just showing
people how to fish, instead of giving them fish.

Okay Bill and DJ -- jump all over me.

Dave Carlson
From my Dell Latitude 630, currently not nearly close enough for my comfort
to my Audio Recording and Mixing Studios, San Francisco Bay Area. But I'll
try to remedy that situation.

----- Original Message -----
From: "Alex Stone" <alex.stone@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Monday, August 22, 2011 16:45
Subject: [Bulk] RE: [hot key detective was Bulk] Re: Transferring Alt
Control Jshortcut fromJaws 11toJaws12


Exactly, why would you ask on a list if it was that easy to find it with
google?
Cheers
Alex

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of kimsan
Sent: 23 August 2011 00:39
To: 'The Jaws for Windows support list.'
Subject: RE: [hot key detective was Bulk] Re: Transferring Alt Control J
shortcut fromJaws 11toJaws12

I love how people recommend a google search but there is no harm in asking
for a quick favor for those who do not have time for a google search... In
this instance, I didn't... Thanks Dave for the hook up...



kimsansong@...

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Chris Smart
Sent: 22 August, 2011 3:05 PM
To: The Jaws for Windows support list.
Subject: RE: [hot key detective was Bulk] Re: Transferring Alt Control J
shortcut fromJaws 11toJaws12

Have you tried typing "hotkey detective" into Google?

At 05:42 PM 8/22/2011, you wrote:
I keep hearing this hot key detective in the mits of this wonderful
discussion. Where do I get it?
Is it duable on windows 7?


kimsansong@...

-----Original Message-----
From: jfw-bounces@...
[mailto:jfw-bounces@...]
On Behalf Of Dave Durber
Sent: 22 August, 2011 12:30 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut fromJaws
11toJaws12

Gerald:

When I recently reinstalled Windows XP Pro on my computer and installed
JAWS 9, the JAWS installation program did not, I repeat, did not,
assign
CTRL+ALT+J or, any other shortcut key combination to JAWS 9.

Likewise, when I installed JAWS 10, 11, and 12, none of the
installation programs for any of those versions did not, again I
repeat, did not, assign any shortcut key.

Finally, before posting my response to your last posting, I called FS
Tech Support to clarify this point.

The Tech Support Representative, when I ask them if JAWS assigns a
shortcut key automatically during the installation process or not, said
that the JAWS

installation program does not assign any shortcut key to the newly
installed

version of JAWS. They went on to say that JAWS might delete an
assigned shortcut key. when you use the Repair JAWS function.

HTH

Sincerely:

Dave Durber

----- Original Message -----
From: "Gerald Levy" <bwaylimited@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Monday, August 22, 2011 12:46 PM
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut fromJaws
11toJaws12



Not necessarily. Assuming JAWS 11 is the latest version
installed on your

computer, it was automatically assigned the hot key
Alt-Control-J when it
was originally installed. Unless you delete this "hidden" hot
key, it
will always launch JAWS 11, even if you create the user-defined
hot key
Alt-Control-J for JAWS 10. As a rule, hot keys automatically
assigned by
an application take precedence over hot keys defined by the
user. You can

use Hot Key Detective to determine whether a particular hot key is
application assigned or user assigned. When I installed the
demo version
of JAWS 10, Alt-Control-J, which had been created automatically
when I
originally installed JAWS 9, was automatically reassigned to
JAWS 10. In
order to reassign Alt-Control-J back to JAWS 9, my default
version of
JAWS, I had to use Hot Key Detective to delete Alt-Control-J
from JAWS 10
and then use the Properties dialog of JAWS 9 to re-create it as a
user-assigned hot key.

Gerald


----- Original Message -----
From: "Dave Durber" <d.durber@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Monday, August 22, 2011 12:02 PM
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut
from Jaws
11toJaws12


Karen:

Yesterday, if you remember, I assigned CTRL+ALT+J to JAWS 10
first and
then JAWS 11. I then unloaded JAWS 10 and pressed the
shortcut key
combination to see which version of JAWS Windows would
launch. In that
instance, JAWS 11 was launched over JAWS 10.

Following your comments in your reply, I reversed the actions
of my
experiment, to see whether Windows reversed its action, that
is, launch
JAWS 10 over JAWS11.

I first deleted the CTRL+ALT+J shortcut key combination for
JAWS 10 and
JAWS 11.

I then assigned the shortcut key to JAWS 11 first and did the
same with
JAWS 10.

I then unloaded JAWS 10 and pressed CTRL+ALT+J and waited to
see which
version of JAWS would be loaded.

Well, surprise, surprise, Windows did reverse its action and
launched
JAWS 10 over JAWS 11.

It appears that if you assign the same shortcut key to more
than one
application, Windows will launch the last program to which you
assigned
the shortcut key combination, that is, the application which
has the
latest updated date and time stamps.

HTH

Sincerely:

Dave Durber

----- Original Message -----
From: "Karen Hughes" <khughes8@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Monday, August 22, 2011 8:24 AM
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut
from Jaws
11toJaws12


dave if yuou assign a short cut then do the same action again
using a
different version of jaws. would it not react to the last
request. this
would eliminate the first request of the same thing. just a
thought.
please advise, karen

----- Original Message -----
From: "Dave Durber" <d.durber@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, August 21, 2011 10:55 AM
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut
from Jaws
11toJaws 12


Dave and everyone:

From what I can tell, the JAWS installation does not
automatically
assign CTRL+ALT+J, as a short cut to start JAWS.

I was using JAWS 10 at the time. As an experiment, I assigned
CTRL+ALT+J, to both JAWS 10 and 11. Windows did not
complain that I
had assigned the short cut to two applications. I unloaded
JAWS 10 and

press CTRL+ALT+J and waited to see which version of JAWS
would be
loaded. Well, in my example, JAWS 11 was loaded.

It would help, if Windows allowed only one occurrence of a
short cut
key combination to be allowed to launch a program. So, if
you tried to

assign a short cut combination that was already assigned to
a program
to another program, Windows would tell you that this was the
case and
give you another opportunity to choose another short cut
combination
for the other program.

Sincerely:

Dave Durber

----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Saturday, August 20, 2011 10:44 AM
Subject: Re: [Bulk] Re: Transferring Alt Control J shortcut
from Jaws
11 toJaws 12


Mike,

Not quite.

Checking the "Start JAWS automatically" just ensure that
JAWS will
start up
on boot of the computer.

When installing a new version (say from 11 to 12) a
shortcut will be
added
to the desktop with the version number (e.g. JAWS 12) and
it may or
may not
have the Ctrl+alt+J keystroke assigned.

If you have more than one major version of JAWS (9, 10, 11,
12) you
could
end up with a desktop shortcut for each, and usually the
first one
with the
hotkey.

Users like Tom need to edit the shortcut preferences for
the old
version and
the new to ensure that only one has the hotkey assigned.

Dave Carlson
From my Dell Latitude 630, currently not nearly close
enough for my
comfort
to my Audio Recording and Mixing Studios, San Francisco Bay
Area. But
I'll
try to remedy that situation.

----- Original Message -----
From: "Mike & Barbara In Arcadia" <mb69mach1@...>
To: "The Jaws for Windows support list."
<jfw@...>
Sent: Saturday, August 20, 2011 5:14
Subject: [Bulk] Re: Transferring Alt Control J shortcut
from Jaws 11
to Jaws
12


Hi Tom,

There is no need to transfer the alt, control, + J,
keystroke. That
is the
default shortcut keystroke for all versions of Jaws. What
you need to

do is
go to the Jaws12 context menu / options / basics and check
the box to
have
Jaws12 start automatically. By checking this box in any
version of
Jaws,
tells Jaws to use this particular keystroke as the shortcut
keystroke.

Hope
this helps. Take care.
Mike

----- Original Message -----
From: Tom Behler
To: Jaws users e-mail list
Sent: Saturday, August 20, 2011 12:17 AM
Subject: Transferring Alt Control J shortcut from Jaws 11
to Jaws 12


Hi, again.

I just thought of one more question here.

What is the best way to transfer the Alt Control J
shortcut to Jaws
12
from
Jaws 11, when doing the upgrade process?

I seem to recall having a problem with this once before in
earlier
upgrades,
and can't remember how to resolve it.

All I remember is that I had great difficulty transferring
the
shortcut
over
to the new version of Jaws from the earlier version.

I would have thought that the "merge utilities" function
would have
taken
care of this, but it didn't in my earlier upgrade efforts.

Thanks for putting up with all my questions lately.

Tom in Michigan



_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
-------------- next part -------------- An HTML attachment was
scrubbed...
URL:
<http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/2
01108
20/665b7f1d/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com