Date   

Re: [Bulk] The best screen resolution with JAWS

Dave...
 

David,

Sounds like a good start to a message to support@...


Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "David" <davidwhitehead1957@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Monday, December 19, 2011 09:33
Subject: RE: [Bulk] The best screen resolution with JAWS


Hello Dave,

In most cases I agree with you,
Especially windows 7, the screen resolution shouldn't be an issue.

However, there's a couple client 64bit machine's I work on,
And with the screen resolution really high, jaws doesn't read didly squat
when I route jaws to pc.
However, wen I bring the resolution down to 1064 728 jaws reads fine.
Although jaws then starts to complain, that your not using the recommended
screen resolution settings.



-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Farfar on Laptop
Sent: Monday, December 19, 2011 12:19 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] The best screen resolution with JAWS

Anders,

You wrote: Earlier I used a screen resolution 1024*768, and sometime I still
use this


According to Freedom Scientific, it no longer matters what resolution you
use. I'm using 1920-1080, which is the recommended value for my laptop
display. No problems at all.

I think those days of having to worry about resolution are gone.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Anders Boholdt-Petersen"
<english_correspondences@...>
To: <jfw@...>
Sent: Monday, December 19, 2011 09:02
Subject: [Bulk] The best screen resolution with JAWS


Hi everyone,

What is the best screen resolution when I have JAWS 11 to JAWS 13 installed
on both my Windows XP and my Windows 7 64-bit computer?

Earlier I used a screen resolution 1024*768, and sometime I still use this
screen resolution.

I have tried the screen resolution Windows 7 recommended (1280*1024), but
here I could not see the Facebook Chat with JAWS.

Very thanks for the answer.

Regards,
Anders


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


reexplaining Outlook07 and finding next text stream

Gerardo Corripio <gera1027@...>
 

HI guys: Thanks for such great ideas on searching for next stream in
Outlook07! But let me reexplain how I use it hoping more ideas might come:
Suppose in a certain email I'd like to skip article via article or section
via section; each article or section is separated via a string of dashes,
asteris, number signs or other symbols. In Outlook Express I used to invoke
the Jaws Find dialogue via Insert+Control+f, set the dialogue to search for
the determined string, being safe to press Escape on finding the first
occurrence. When reading the section and wanting to go to the next one, I'd

do Insert+f3 and without having to reinvoke the Search command it'd put me
on the next occurrence of the string, thus being able to jump to the next
article or section without having to reenter the Find dialogue.

OK I'm wanting to accomplish the same in Outlook07 emails: I do
Insert+Control+f to invoke Outlook07's Find and search for the string once I
know what it uses to separate articles or sections; I read the first article
or section, and wanting to search for the next occurrence, I have to reenter
the Find dialogue with Insert+Control+f and do Enter on next; logic would
have it that via the Control+page up or page down like in Word, it'll find
the next occurrence, thus making it easier to read; yes sighted people can
click on the ribbon and click on the Find Next icon, but how would we do
this same task as Jaws users?

So my question is there another way to accomplish this task as I used to do
before with Outlook Express? Hope now we're on the same track having
explained in more detail my situation.

Thanks in advanced for any other great ideas! Lists like these really help a
lot to be able to use more efficiently our technologies!

Gerardo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/e115aad5/attachment.html>


Re: [Bulk] The best screen resolution with JAWS

David <davidwhitehead1957@...>
 

Hello Dave,

In most cases I agree with you,
Especially windows 7, the screen resolution shouldn't be an issue.

However, there's a couple client 64bit machine's I work on,
And with the screen resolution really high, jaws doesn't read didly squat
when I route jaws to pc.
However, wen I bring the resolution down to 1064 728 jaws reads fine.
Although jaws then starts to complain, that your not using the recommended
screen resolution settings.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Farfar on Laptop
Sent: Monday, December 19, 2011 12:19 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] The best screen resolution with JAWS

Anders,

You wrote: Earlier I used a screen resolution 1024*768, and sometime I still
use this


According to Freedom Scientific, it no longer matters what resolution you
use. I'm using 1920-1080, which is the recommended value for my laptop
display. No problems at all.

I think those days of having to worry about resolution are gone.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Anders Boholdt-Petersen"
<english_correspondences@...>
To: <jfw@...>
Sent: Monday, December 19, 2011 09:02
Subject: [Bulk] The best screen resolution with JAWS


Hi everyone,

What is the best screen resolution when I have JAWS 11 to JAWS 13 installed
on both my Windows XP and my Windows 7 64-bit computer?

Earlier I used a screen resolution 1024*768, and sometime I still use this
screen resolution.

I have tried the screen resolution Windows 7 recommended (1280*1024), but
here I could not see the Facebook Chat with JAWS.

Very thanks for the answer.

Regards,
Anders


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] The best screen resolution with JAWS

Dave...
 

Anders,

You wrote: Earlier I used a screen resolution 1024*768, and sometime I still
use this


According to Freedom Scientific, it no longer matters what resolution you
use. I'm using 1920-1080, which is the recommended value for my laptop
display. No problems at all.

I think those days of having to worry about resolution are gone.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Anders Boholdt-Petersen"
<english_correspondences@...>
To: <jfw@...>
Sent: Monday, December 19, 2011 09:02
Subject: [Bulk] The best screen resolution with JAWS


Hi everyone,

What is the best screen resolution when I have JAWS 11 to JAWS 13 installed
on both my Windows XP and my Windows 7 64-bit computer?

Earlier I used a screen resolution 1024*768, and sometime I still use this
screen resolution.

I have tried the screen resolution Windows 7 recommended (1280*1024), but
here I could not see the Facebook Chat with JAWS.

Very thanks for the answer.

Regards,
Anders


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] [Bulk] Using Outlook07 how to search for Next string oftext in email?

Kimsan <kimsansong@...>
 

Dave:
I was just reading that tip from a book from access technology institute and
it said the keys I mentioned, hmmm. The F4 and shift f 4 doesn't work here
in 2010 neither.
I never find myself needing to find the next occurrence of a word in an
email but it would be good to know.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Farfar on Laptop
Sent: Friday, December 16, 2011 2:15 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] RE: [Bulk] RE: Using Outlook07 how to search for Next
string oftext in email?

Kimsan,

That doesn't seem to work. Neither does shift+F4.

I noticed an inconsistency, as well.

The first press of f4 opens the dialog to allow entering the text. Then
Enter will not do anything but land you on the Find Next button, contrary to
common sense. It requires pressing the find next button (Alt+f) to find the
word and announce the line containing the word.

Repeated presses of Alt+F will find next occurrences of the word.

Also I notice that even messages in plain text work fine with the F4 dialog,
so my earlier post was erroneous..

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Kimsan" <kimsansong@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Friday, December 16, 2011 14:01
Subject: [Bulk] RE: [Bulk] RE: Using Outlook07 how to search for Next string
oftext in email?


Try CTRL page up or CTRL page down to find the next occurrence of the word.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Farfar on Laptop
Sent: Friday, December 16, 2011 1:17 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] RE: Using Outlook07 how to search for Next string of
text in email?

Kamil,

Okay I now tried the Insert+Ctrl+f and it does bring up the JAWS find, and
thank you for pointing that out to me. So it works on my machine with
Outlook 2007, Windows 7, and JAWS 13.0.527.

Now how do I have it search again without having to press Insert+Ctrl+F
again? I think that was the basis of Gerardo's original message.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Kamil Żak" <kamilek687@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Friday, December 16, 2011 13:11
Subject: [Bulk] RE: Using Outlook07 how to search for Next string of text in
email?


Sorry, wrong key. Control+insert+f is not working properly in your outlook
07 and jaws? How jaws version are you using? For my jaws 12.0
control+insert+f is working very good.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...
jdh.com] On Behalf Of Kamil Żak
Sent: Friday, December 16, 2011 10:08 PM
To: 'The Jaws for Windows support list.'
Subject: RE: Using Outlook07 how to search for Next string of text in
email?

Use f5 key ant type string to search, and press enter. Next time pres
only f3.


-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...
jdh.com] On Behalf Of Gerardo Corripio
Sent: Friday, December 16, 2011 9:38 PM
To: 'The Jaws for Windows support list.'
Subject: Using Outlook07 how to search for Next string of text in
email?

Hi listers: Because in Outlook07 Insert+Control+f brings up
Outlook's Find dialogue rather than the Jaws, is there another way
of searching for the next text string rather than reopening the
Outlook's find and researching for the same string over and over again?

Gerardo

-------------- next part -------------- An HTML attachment was
scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-
jdh.com/attachments/20111216/f8418162/attachment.html>
_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com

_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


The best screen resolution with JAWS

Anders Boholdt-Petersen
 

Hi everyone,

What is the best screen resolution when I have JAWS 11 to JAWS 13 installed
on both my Windows XP and my Windows 7 64-bit computer?

Earlier I used a screen resolution 1024*768, and sometime I still use this
screen resolution.

I have tried the screen resolution Windows 7 recommended (1280*1024), but
here I could not see the Facebook Chat with JAWS.

Very thanks for the answer.

Regards,
Anders


JFW and Adobe Connect.

Mike Mote <mikemote@...>
 

Hi folks. Just wondering how well JFW and Adobe Connect work together. I have to utilize a chatroom with Adobe Connect for a future job interview, and I'm wondering if it will be accessible with speech. Any scripts out there that make it more accessible?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/a86e934d/attachment.html>


JAWS 11 not announce when I use the TAB-key in WORD 2003

Anders Boholdt-Petersen
 

Hi everyone,

When I use the TAB-key in WORD 2003, JAWS 11.0.1471 will not say how many
centimetres the cursor moves.

It is an error in this version of JAWS?

Very thanks.

Regards,
Anders


Jaws and Google AdWords?

Chris Smart <csmart8@...>
 

Hi folks.

Do any of you advertise your businesses through Google AdWords?
I'm having trouble with it, basically, things are very unpredictable.

Sometimes hitting enter on various mouseOvers or links bring up the expected submenus or additional options, but many times do not. I'm having trouble figuring out why this is.

For example, to see which search terms are triggering my adds, I hit ENTER on Campaigns, ENTER on Keywords, then click on a mouseover that says "see search terms". That is supposed to bring up options like all, selected, etc. but does not do so. I know I've managed to do this in the past, and can't for the life of me figure out how.

It's general flakiness and unpredictability that is driving me nuts with the Addwords system.

I have no trouble with some things, like selecting a date range, or page of items in the various tables, number of rows per page, but other things either work some of the time, or not at all.

I've tried some general things like 32-bit or 64-bit versions of Internet Explorer 9, trying jaws 12 as well as 13, trying Zoom ratios of 100 125 and 150%, turning automatic page refresh off, etc. But I'm having little success. I'd like to at least get to a point where simple operations take a few minutes or seconds, rather than an hour of aimless fiddling about until things seem to happen miraculously.

So, have any of you had more luck with AdWords? Any tips to share?

thanks
Chris
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING! Clear True Sound: www.ctsmastering.com --

Always have your stuff when you need it with @Dropbox. Seamlessly share with your friends and colleagues. 2GB account is free! http://db.tt/bQ2GuIt


Re: [Bulk] Authorizing JAWS on another computer

northstar1950@...
 

yeh, but that will not work if you change systems. i garantee you. or if you make hardware changes to your existing system.

Legend has it that on Monday 12/19/2011 06:35 AM, David said:
----------------------------------------
Hello there;

Well, this subject is very interesting.
I did a full format of my computer,
However before I started the process,
I went into c:\programs\freedom Scientific
And I save the activator folder.
Now, after the format was complete,
And I had the computer at the desktop,
I installed jaws,
Obviously it was running in demo mode.
So,

1, I unloaded jaws,

2, started narrator,

3, navigated to my external drive,

4, found the jaws activator program I previously saved,

Copied to clipboard,

5, navigated to, c:\programs\freedom scientific,
And pasted the folder,
And said yes to copy and replace.

Once the copy was complete,

I unloaded narrator,
Started jaws,
And to my wondering surprise?
The jaws startup wizard appeared.
Yep?
I was out of demo mode,
And didn't sacrifice a IL MKey.
So, there you go,


-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Farfar on Laptop
Sent: Sunday, December 18, 2011 8:21 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Re: Authorizing JAWS on another computer

Joni,

Good that you're set. However be sure to visit the FS Activate site and put
in an official request to increase the number of keys. You're down to 1 and
that also makes me nervous.

You may not get more, but then you won't know until you ask.

FS is in the habit of not adding keys until you're down to zero, and that's
very nerve-wracking.

Note that if you make any significant changes to your computer hardware
(such as a different or additional DVD burner) your hardware key will change
and JAWS will need to be reauthorized and another key is lost. I've gone
through 5 keys in the past two months due to getting a new laptop at work,
installing two new burners in my home computer, and setting up my wife's new
laptop.

FS has been a bit cranky and I just have one key for now until I start
behaving myself.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 17:10
Subject: [Bulk] Re: Authorizing JAWS on another computer


I managed to get it authorized. The 40-minute mode makes me nervous when I
am working with a new computer, new operating system and worrying about
being in the middle of something when JAWS needs a reboot.

The first time I did the ILM process I was on the phone with tech support,
so the procedure is not that familiar to me and I was afraid I would not get
it done correctly. Should have borrowed a Valium from that newly installed
JAWS voice I guess to make me calmer through the process.

Nice to end the day on a successful note.

Joni
----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 7:56 PM
Subject: Re: Authorizing JAWS on another computer


Visit the FS Activate site. Have your JAWS serial number and 25-digit key
ready to input. I keep mine in a cheat text file so it's always handy.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: <Jfw@...>
Sent: Sunday, December 18, 2011 15:48
Subject: Authorizing JAWS on another computer


I have JAWS installed on my current XP computer. I had to go to the fs
activate site to authorize it since the CD did not work when I tried that
method.

I have 2 keys left. I purchased a Windows 7 computer today. I installed
JAWS from the DVD. How do I go about authorizing it on the Windows 7
computer? Should I just visit the fs activate site? Do I need to type in
my activation/authorization code from the XP computer? This is the first
time I have had JAWS on multiple computers.

Also, when I get rid of the XP computer, do I just lose a key or can I
regain it somehow for future use?

Thanks.

Joni


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com
----------------------------------------



<http://www.sendspace.com/folder/i7xwg4>Click here to check out my sendspace offerings!


Re: [Bulk] Authorizing JAWS on another computer

Dave...
 

David,

so you were using the same computer, same hardware, just a reformatted drive
and installed operating system? Then yes using the same activator folder
would work, since the hardware locking key would also still be the same.

Good to know that it does work so well.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "David" <davidwhitehead1957@...>
To: "'The Jaws for Windows support list.'" <jfw@...>
Sent: Monday, December 19, 2011 04:35
Subject: RE: [Bulk] Re: Authorizing JAWS on another computer


Hello there;

Well, this subject is very interesting.
I did a full format of my computer,
However before I started the process,
I went into c:\programs\freedom Scientific
And I save the activator folder.
Now, after the format was complete,
And I had the computer at the desktop,
I installed jaws,
Obviously it was running in demo mode.
So,

1, I unloaded jaws,

2, started narrator,

3, navigated to my external drive,

4, found the jaws activator program I previously saved,

Copied to clipboard,

5, navigated to, c:\programs\freedom scientific,
And pasted the folder,
And said yes to copy and replace.

Once the copy was complete,

I unloaded narrator,
Started jaws,
And to my wondering surprise?
The jaws startup wizard appeared.
Yep?
I was out of demo mode,
And didn't sacrifice a IL MKey.
So, there you go,


-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Farfar on Laptop
Sent: Sunday, December 18, 2011 8:21 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Re: Authorizing JAWS on another computer

Joni,

Good that you're set. However be sure to visit the FS Activate site and put
in an official request to increase the number of keys. You're down to 1 and
that also makes me nervous.

You may not get more, but then you won't know until you ask.

FS is in the habit of not adding keys until you're down to zero, and that's
very nerve-wracking.

Note that if you make any significant changes to your computer hardware
(such as a different or additional DVD burner) your hardware key will change
and JAWS will need to be reauthorized and another key is lost. I've gone
through 5 keys in the past two months due to getting a new laptop at work,
installing two new burners in my home computer, and setting up my wife's new
laptop.

FS has been a bit cranky and I just have one key for now until I start
behaving myself.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 17:10
Subject: [Bulk] Re: Authorizing JAWS on another computer


I managed to get it authorized. The 40-minute mode makes me nervous when I
am working with a new computer, new operating system and worrying about
being in the middle of something when JAWS needs a reboot.

The first time I did the ILM process I was on the phone with tech support,
so the procedure is not that familiar to me and I was afraid I would not get
it done correctly. Should have borrowed a Valium from that newly installed
JAWS voice I guess to make me calmer through the process.

Nice to end the day on a successful note.

Joni
----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 7:56 PM
Subject: Re: Authorizing JAWS on another computer


Visit the FS Activate site. Have your JAWS serial number and 25-digit key
ready to input. I keep mine in a cheat text file so it's always handy.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: <Jfw@...>
Sent: Sunday, December 18, 2011 15:48
Subject: Authorizing JAWS on another computer


I have JAWS installed on my current XP computer. I had to go to the fs
activate site to authorize it since the CD did not work when I tried that
method.

I have 2 keys left. I purchased a Windows 7 computer today. I installed
JAWS from the DVD. How do I go about authorizing it on the Windows 7
computer? Should I just visit the fs activate site? Do I need to type in
my activation/authorization code from the XP computer? This is the first
time I have had JAWS on multiple computers.

Also, when I get rid of the XP computer, do I just lose a key or can I
regain it somehow for future use?

Thanks.

Joni


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] Authorizing JAWS on another computer

David <davidwhitehead1957@...>
 

Hello there;

As I said,
After installing jaws on my formatted computer,
It was running in demo mode.

I didn't want to sacrifice a ILM Key,
So, I took the chance to copy the activator folder into the c:\programs
freedom scientific folder.
I wasn't sure of the result, but now, I do know.

As for the resetting the ILM keys,

I think FS makes a person wait at least 6 months, before his or her keys can
be reset.

Not 100% sure though.

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Juan Pablo
Sent: Monday, December 19, 2011 7:43 AM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Re: Authorizing JAWS on another computer

David, did you compare the loocking code before and after formating?

-----Original Message-----
From: David
Sent: Monday, December 19, 2011 10:35 AM
To: 'The Jaws for Windows support list.'
Subject: RE: [Bulk] Re: Authorizing JAWS on another computer

Hello there;

Well, this subject is very interesting.
I did a full format of my computer,
However before I started the process,
I went into c:\programs\freedom Scientific And I save the activator folder.
Now, after the format was complete,
And I had the computer at the desktop,
I installed jaws,
Obviously it was running in demo mode.
So,

1, I unloaded jaws,

2, started narrator,

3, navigated to my external drive,

4, found the jaws activator program I previously saved,

Copied to clipboard,

5, navigated to, c:\programs\freedom scientific, And pasted the folder, And
said yes to copy and replace.

Once the copy was complete,

I unloaded narrator,
Started jaws,
And to my wondering surprise?
The jaws startup wizard appeared.
Yep?
I was out of demo mode,
And didn't sacrifice a IL MKey.
So, there you go,


-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Farfar on Laptop
Sent: Sunday, December 18, 2011 8:21 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Re: Authorizing JAWS on another computer

Joni,

Good that you're set. However be sure to visit the FS Activate site and put
in an official request to increase the number of keys. You're down to 1 and
that also makes me nervous.

You may not get more, but then you won't know until you ask.

FS is in the habit of not adding keys until you're down to zero, and that's
very nerve-wracking.

Note that if you make any significant changes to your computer hardware
(such as a different or additional DVD burner) your hardware key will change
and JAWS will need to be reauthorized and another key is lost. I've gone
through 5 keys in the past two months due to getting a new laptop at work,
installing two new burners in my home computer, and setting up my wife's new
laptop.

FS has been a bit cranky and I just have one key for now until I start
behaving myself.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 17:10
Subject: [Bulk] Re: Authorizing JAWS on another computer


I managed to get it authorized. The 40-minute mode makes me nervous when I
am working with a new computer, new operating system and worrying about
being in the middle of something when JAWS needs a reboot.

The first time I did the ILM process I was on the phone with tech support,
so the procedure is not that familiar to me and I was afraid I would not get
it done correctly. Should have borrowed a Valium from that newly installed
JAWS voice I guess to make me calmer through the process.

Nice to end the day on a successful note.

Joni
----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 7:56 PM
Subject: Re: Authorizing JAWS on another computer


Visit the FS Activate site. Have your JAWS serial number and 25-digit key
ready to input. I keep mine in a cheat text file so it's always handy.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: <Jfw@...>
Sent: Sunday, December 18, 2011 15:48
Subject: Authorizing JAWS on another computer


I have JAWS installed on my current XP computer. I had to go to the fs
activate site to authorize it since the CD did not work when I tried that
method.

I have 2 keys left. I purchased a Windows 7 computer today. I installed
JAWS from the DVD. How do I go about authorizing it on the Windows 7
computer? Should I just visit the fs activate site? Do I need to type in
my activation/authorization code from the XP computer? This is the first
time I have had JAWS on multiple computers.

Also, when I get rid of the XP computer, do I just lose a key or can I
regain it somehow for future use?

Thanks.

Joni


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] Authorizing JAWS on another computer

Juan Pablo <jpculasso@...>
 

David, did you compare the loocking code before and after formating?

-----Original Message-----
From: David
Sent: Monday, December 19, 2011 10:35 AM
To: 'The Jaws for Windows support list.'
Subject: RE: [Bulk] Re: Authorizing JAWS on another computer

Hello there;

Well, this subject is very interesting.
I did a full format of my computer,
However before I started the process,
I went into c:\programs\freedom Scientific
And I save the activator folder.
Now, after the format was complete,
And I had the computer at the desktop,
I installed jaws,
Obviously it was running in demo mode.
So,

1, I unloaded jaws,

2, started narrator,

3, navigated to my external drive,

4, found the jaws activator program I previously saved,

Copied to clipboard,

5, navigated to, c:\programs\freedom scientific,
And pasted the folder,
And said yes to copy and replace.

Once the copy was complete,

I unloaded narrator,
Started jaws,
And to my wondering surprise?
The jaws startup wizard appeared.
Yep?
I was out of demo mode,
And didn't sacrifice a IL MKey.
So, there you go,


-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Farfar on Laptop
Sent: Sunday, December 18, 2011 8:21 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Re: Authorizing JAWS on another computer

Joni,

Good that you're set. However be sure to visit the FS Activate site and put
in an official request to increase the number of keys. You're down to 1 and
that also makes me nervous.

You may not get more, but then you won't know until you ask.

FS is in the habit of not adding keys until you're down to zero, and that's
very nerve-wracking.

Note that if you make any significant changes to your computer hardware
(such as a different or additional DVD burner) your hardware key will change
and JAWS will need to be reauthorized and another key is lost. I've gone
through 5 keys in the past two months due to getting a new laptop at work,
installing two new burners in my home computer, and setting up my wife's new
laptop.

FS has been a bit cranky and I just have one key for now until I start
behaving myself.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 17:10
Subject: [Bulk] Re: Authorizing JAWS on another computer


I managed to get it authorized. The 40-minute mode makes me nervous when I
am working with a new computer, new operating system and worrying about
being in the middle of something when JAWS needs a reboot.

The first time I did the ILM process I was on the phone with tech support,
so the procedure is not that familiar to me and I was afraid I would not get
it done correctly. Should have borrowed a Valium from that newly installed
JAWS voice I guess to make me calmer through the process.

Nice to end the day on a successful note.

Joni
----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 7:56 PM
Subject: Re: Authorizing JAWS on another computer


Visit the FS Activate site. Have your JAWS serial number and 25-digit key
ready to input. I keep mine in a cheat text file so it's always handy.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: <Jfw@...>
Sent: Sunday, December 18, 2011 15:48
Subject: Authorizing JAWS on another computer


I have JAWS installed on my current XP computer. I had to go to the fs
activate site to authorize it since the CD did not work when I tried that
method.

I have 2 keys left. I purchased a Windows 7 computer today. I installed
JAWS from the DVD. How do I go about authorizing it on the Windows 7
computer? Should I just visit the fs activate site? Do I need to type in
my activation/authorization code from the XP computer? This is the first
time I have had JAWS on multiple computers.

Also, when I get rid of the XP computer, do I just lose a key or can I
regain it somehow for future use?

Thanks.

Joni


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: [Bulk] Authorizing JAWS on another computer

David <davidwhitehead1957@...>
 

Hello there;

Well, this subject is very interesting.
I did a full format of my computer,
However before I started the process,
I went into c:\programs\freedom Scientific
And I save the activator folder.
Now, after the format was complete,
And I had the computer at the desktop,
I installed jaws,
Obviously it was running in demo mode.
So,

1, I unloaded jaws,

2, started narrator,

3, navigated to my external drive,

4, found the jaws activator program I previously saved,

Copied to clipboard,

5, navigated to, c:\programs\freedom scientific,
And pasted the folder,
And said yes to copy and replace.

Once the copy was complete,

I unloaded narrator,
Started jaws,
And to my wondering surprise?
The jaws startup wizard appeared.
Yep?
I was out of demo mode,
And didn't sacrifice a IL MKey.
So, there you go,

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...]
On Behalf Of Farfar on Laptop
Sent: Sunday, December 18, 2011 8:21 PM
To: The Jaws for Windows support list.
Subject: Re: [Bulk] Re: Authorizing JAWS on another computer

Joni,

Good that you're set. However be sure to visit the FS Activate site and put
in an official request to increase the number of keys. You're down to 1 and
that also makes me nervous.

You may not get more, but then you won't know until you ask.

FS is in the habit of not adding keys until you're down to zero, and that's
very nerve-wracking.

Note that if you make any significant changes to your computer hardware
(such as a different or additional DVD burner) your hardware key will change
and JAWS will need to be reauthorized and another key is lost. I've gone
through 5 keys in the past two months due to getting a new laptop at work,
installing two new burners in my home computer, and setting up my wife's new
laptop.

FS has been a bit cranky and I just have one key for now until I start
behaving myself.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 17:10
Subject: [Bulk] Re: Authorizing JAWS on another computer


I managed to get it authorized. The 40-minute mode makes me nervous when I
am working with a new computer, new operating system and worrying about
being in the middle of something when JAWS needs a reboot.

The first time I did the ILM process I was on the phone with tech support,
so the procedure is not that familiar to me and I was afraid I would not get
it done correctly. Should have borrowed a Valium from that newly installed
JAWS voice I guess to make me calmer through the process.

Nice to end the day on a successful note.

Joni
----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 7:56 PM
Subject: Re: Authorizing JAWS on another computer


Visit the FS Activate site. Have your JAWS serial number and 25-digit key
ready to input. I keep mine in a cheat text file so it's always handy.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: <Jfw@...>
Sent: Sunday, December 18, 2011 15:48
Subject: Authorizing JAWS on another computer


I have JAWS installed on my current XP computer. I had to go to the fs
activate site to authorize it since the CD did not work when I tried that
method.

I have 2 keys left. I purchased a Windows 7 computer today. I installed
JAWS from the DVD. How do I go about authorizing it on the Windows 7
computer? Should I just visit the fs activate site? Do I need to type in
my activation/authorization code from the XP computer? This is the first
time I have had JAWS on multiple computers.

Also, when I get rid of the XP computer, do I just lose a key or can I
regain it somehow for future use?

Thanks.

Joni


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


About MCPDs

kadia <kadia@...>
 

Hello listers,

Does anyone hold the degree called MCPD, which is Microsoft professional developer?
If so, I'd like to get some information about the development tools and their accessibility with Jaws.
I am talking about tools such as ASP, ADO, LINQ, Silverlight, WPF, WCF/Web Services.

I am totally blind and consider to study in a software development course.
I would very much appreciate, if someone who is familiar with the subject could share his experience with me.
And if I need further assistance, I am also ready to pay for it.
You can email me to
kadia@...
Thank you and best regards
Kadia
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.the-jdh.com/pipermail/jfw_lists.the-jdh.com/attachments/20111219/8759e102/attachment.html>


Re: [Bulk] Authorizing JAWS on another computer

Dave...
 

Joni,

Good that you're set. However be sure to visit the FS Activate site and put
in an official request to increase the number of keys. You're down to 1 and
that also makes me nervous.

You may not get more, but then you won't know until you ask.

FS is in the habit of not adding keys until you're down to zero, and that's
very nerve-wracking.

Note that if you make any significant changes to your computer hardware
(such as a different or additional DVD burner) your hardware key will change
and JAWS will need to be reauthorized and another key is lost. I've gone
through 5 keys in the past two months due to getting a new laptop at work,
installing two new burners in my home computer, and setting up my wife's new
laptop.

FS has been a bit cranky and I just have one key for now until I start
behaving myself.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 17:10
Subject: [Bulk] Re: Authorizing JAWS on another computer


I managed to get it authorized. The 40-minute mode makes me nervous when I
am working with a new computer, new operating system and worrying about
being in the middle of something when JAWS needs a reboot.

The first time I did the ILM process I was on the phone with tech support,
so the procedure is not that familiar to me and I was afraid I would not get
it done correctly. Should have borrowed a Valium from that newly installed
JAWS voice I guess to make me calmer through the process.

Nice to end the day on a successful note.

Joni
----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 7:56 PM
Subject: Re: Authorizing JAWS on another computer


Visit the FS Activate site. Have your JAWS serial number and 25-digit key
ready to input. I keep mine in a cheat text file so it's always handy.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: <Jfw@...>
Sent: Sunday, December 18, 2011 15:48
Subject: Authorizing JAWS on another computer


I have JAWS installed on my current XP computer. I had to go to the fs
activate site to authorize it since the CD did not work when I tried that
method.

I have 2 keys left. I purchased a Windows 7 computer today. I installed
JAWS from the DVD. How do I go about authorizing it on the Windows 7
computer? Should I just visit the fs activate site? Do I need to type in
my activation/authorization code from the XP computer? This is the first
time I have had JAWS on multiple computers.

Also, when I get rid of the XP computer, do I just lose a key or can I
regain it somehow for future use?

Thanks.

Joni


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Authorizing JAWS on another computer

Joni Colver <earlybird@...>
 

I managed to get it authorized. The 40-minute mode makes me nervous when I
am working with a new computer, new operating system and worrying about
being in the middle of something when JAWS needs a reboot.

The first time I did the ILM process I was on the phone with tech support,
so the procedure is not that familiar to me and I was afraid I would not get
it done correctly. Should have borrowed a Valium from that newly installed
JAWS voice I guess to make me calmer through the process.

Nice to end the day on a successful note.

Joni

----- Original Message -----
From: "Farfar on Laptop" <dgcarlson@...>
To: "The Jaws for Windows support list." <jfw@...>
Sent: Sunday, December 18, 2011 7:56 PM
Subject: Re: Authorizing JAWS on another computer


Visit the FS Activate site. Have your JAWS serial number and 25-digit key
ready to input. I keep mine in a cheat text file so it's always handy.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area
----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: <Jfw@...>
Sent: Sunday, December 18, 2011 15:48
Subject: Authorizing JAWS on another computer


I have JAWS installed on my current XP computer. I had to go to the fs
activate site to authorize it since the CD did not work when I tried that
method.

I have 2 keys left. I purchased a Windows 7 computer today. I installed
JAWS from the DVD. How do I go about authorizing it on the Windows 7
computer? Should I just visit the fs activate site? Do I need to type in
my activation/authorization code from the XP computer? This is the first
time I have had JAWS on multiple computers.

Also, when I get rid of the XP computer, do I just lose a key or can I
regain it somehow for future use?

Thanks.

Joni


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Authorizing JAWS on another computer

George B
 

on your win 7 maching go to the authorization in the help menu
follow the prompts and when it ask for your authorization key type in the
key in that same field from your p c.
note; make sure to tell it you want to authorize via internet

-----Original Message-----
From: jfw-bounces@... [mailto:jfw-bounces@...
jdh.com] On Behalf Of Joni Colver
Sent: Sunday, December 18, 2011 15:48
To: Jfw@...
Subject: Authorizing JAWS on another computer

I have JAWS installed on my current XP computer. I had to go to the fs
activate site to authorize it since the CD did not work when I tried
that
method.

I have 2 keys left. I purchased a Windows 7 computer today. I
installed
JAWS from the DVD. How do I go about authorizing it on the Windows 7
computer? Should I just visit the fs activate site? Do I need to type
in
my activation/authorization code from the XP computer? This is the
first
time I have had JAWS on multiple computers.

Also, when I get rid of the XP computer, do I just lose a key or can I
regain it somehow for future use?

Thanks.

Joni


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Re: Authorizing JAWS on another computer

Dave...
 

Visit the FS Activate site. Have your JAWS serial number and 25-digit key
ready to input. I keep mine in a cheat text file so it's always handy.

Dave Carlson
Sent from my Dell Latitude E6520 using Windows 7, San Francisco Bay Area

----- Original Message -----
From: "Joni Colver" <earlybird@...>
To: <Jfw@...>
Sent: Sunday, December 18, 2011 15:48
Subject: Authorizing JAWS on another computer


I have JAWS installed on my current XP computer. I had to go to the fs
activate site to authorize it since the CD did not work when I tried that
method.

I have 2 keys left. I purchased a Windows 7 computer today. I installed
JAWS from the DVD. How do I go about authorizing it on the Windows 7
computer? Should I just visit the fs activate site? Do I need to type in
my activation/authorization code from the XP computer? This is the first
time I have had JAWS on multiple computers.

Also, when I get rid of the XP computer, do I just lose a key or can I
regain it somehow for future use?

Thanks.

Joni


_______________________________________________
Jfw mailing list
Jfw@...
http://lists.the-jdh.com/mailman/listinfo/jfw_lists.the-jdh.com


Authorizing JAWS on another computer

Joni Colver <earlybird@...>
 

I have JAWS installed on my current XP computer. I had to go to the fs
activate site to authorize it since the CD did not work when I tried that
method.

I have 2 keys left. I purchased a Windows 7 computer today. I installed
JAWS from the DVD. How do I go about authorizing it on the Windows 7
computer? Should I just visit the fs activate site? Do I need to type in
my activation/authorization code from the XP computer? This is the first
time I have had JAWS on multiple computers.

Also, when I get rid of the XP computer, do I just lose a key or can I
regain it somehow for future use?

Thanks.

Joni