Date   

moderated Re: Jaws 2021 and emoji panel

 

Hi,

I assume that this is not the case with other synthesizers such as Eloquence and Windows OneCore (OneCore voices are best ones to use when dealing with emojis). If I’m correct, it is something to ask Nuance through Vispero.

Cheers,

Joseph

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, October 10, 2020 11:10 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 and emoji panel

 

Thanks Joseph,

Very interesting.

I tried SAPI 5 and Eloquence and they read the emoji just fine.

I went back to my default of Tom enhanced from Vocalizer and it read it when I re-read a sent message.

Then, I just added one here and it just says 12.

🍸

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Joseph Lee
Sent: Saturday, October 10, 2020 10:59 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 and emoji panel

 

Hi,

This is a synthesizer issue, and unless JAWS is told to process certain Unicode symbols directly and send them to synths, it won’t be able to read emojis and some Unicode symbols correctly.

Cheers,

Joseph

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, October 10, 2020 6:37 AM
To: main@jfw.groups.io
Subject: Jaws 2021 and emoji panel

 

I find I have to use Narrator to arrow through the emoji panel, and after picking one, Narrator reads the emoji just fine.

Jaws 2021 reads a number.

I sent a note to a friend who has a great job at a place where it is not uncommon for the office to go out for a drink at 3 PM to end the day.  So I used the whiskey glass emoji.  Narrator reads it accurately.  Jaws 2021 says “twelve.”

 

Any thoughts about how Jaws can be made to speak the emoji?

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Jaws 2021 and emoji panel

Richard Turner
 

Thanks Joseph,

Very interesting.

I tried SAPI 5 and Eloquence and they read the emoji just fine.

I went back to my default of Tom enhanced from Vocalizer and it read it when I re-read a sent message.

Then, I just added one here and it just says 12.

🍸

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Joseph Lee
Sent: Saturday, October 10, 2020 10:59 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 and emoji panel

 

Hi,

This is a synthesizer issue, and unless JAWS is told to process certain Unicode symbols directly and send them to synths, it won’t be able to read emojis and some Unicode symbols correctly.

Cheers,

Joseph

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, October 10, 2020 6:37 AM
To: main@jfw.groups.io
Subject: Jaws 2021 and emoji panel

 

I find I have to use Narrator to arrow through the emoji panel, and after picking one, Narrator reads the emoji just fine.

Jaws 2021 reads a number.

I sent a note to a friend who has a great job at a place where it is not uncommon for the office to go out for a drink at 3 PM to end the day.  So I used the whiskey glass emoji.  Narrator reads it accurately.  Jaws 2021 says “twelve.”

 

Any thoughts about how Jaws can be made to speak the emoji?

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Jaws 2021 and emoji panel

 

Hi,

This is a synthesizer issue, and unless JAWS is told to process certain Unicode symbols directly and send them to synths, it won’t be able to read emojis and some Unicode symbols correctly.

Cheers,

Joseph

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, October 10, 2020 6:37 AM
To: main@jfw.groups.io
Subject: Jaws 2021 and emoji panel

 

I find I have to use Narrator to arrow through the emoji panel, and after picking one, Narrator reads the emoji just fine.

Jaws 2021 reads a number.

I sent a note to a friend who has a great job at a place where it is not uncommon for the office to go out for a drink at 3 PM to end the day.  So I used the whiskey glass emoji.  Narrator reads it accurately.  Jaws 2021 says “twelve.”

 

Any thoughts about how Jaws can be made to speak the emoji?

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Outlook issues

Richard Turner
 

As for the calendar issue, I have the same issue and it is a pain.

 

As for the showing in groups, here is the setting and the hotkey to turn it off.

Show in Groups
Alt followed by V, A, B, W

It is a toggle, so each time you do that it switches to the opposite setting.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of kevin meyers
Sent: Saturday, October 10, 2020 7:43 AM
To: main@jfw.groups.io
Subject: Outlook issues

 

Hello,

 

I’m using the most recent versions of Outlook2016 and Jaws2020. When I’m in the calendar, I use to be able to tab to get from one event to the other. For some reason it now says “day view” and then the appointment. There are day there are no events and Jaws still reads “day view and the time is from the day I’m on to the next day.

 

Is there a way for this not to happen and just the event is read and days that don’t have anything are skipped?

 

I added another email address. When I move to the address inbox it says “group by expanded date yesterday”. I have to arrow down twice before any emails appear. The other email address that are setup in Outlook don’t do this. What can I do so the group view doesn’t show up?

 

Thanks,

 

Kevin

 

 


moderated Re: auto complete in Excel not working

Mario
 

for me, I'm using 2010 and sometimes it doesn't work half of the time. it's very annoying, isn't it.

-------- Original Message --------
From: Denise J Moses [mailto:denisejmoses@gmail.com]
To: <jfw@groups.io>
Date: Friday, October 9, 2020, 10:51 PM
Subject: auto complete in Excel not working
After my computer updated auto complete in Excel 2016 quit working.  I
am using JAWS 2018.  2020 won’t work at all with this feature.  I type
in frequently used words in my checkbook register so I don’t have to
type the whole word.  Also the read column title won’t stay inacted.  I
have to keep going into quick setting & turn it back on again.  Can I
fix these 2 issues?

Denise


moderated Re: I Cannot Join Zoom Meeting from my Outlook Calendar

Jason White
 

Yes, this is how it works, and it has been for as long as I’ve been using Microsoft Outlook (from late 2014).

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cynthia Bruce
Sent: Saturday, October 10, 2020 9:58 AM
To: main@jfw.groups.io
Subject: Re: I Cannot Join Zoom Meeting from my Outlook Calendar

 

I have found that I have to go into the notes in Outlook where the entire invitation appears and navigate to the link. When I do that, I then hit shift F10 to bring up the context menu and go to open the link. Often, that is the only way it will work. Hope this helps.



On Oct 10, 2020, at 1:18 AM, Randy Barnett <blindmansbluff09@...> wrote:



Well, try the public release of Jaws. As  I just had an issue with the Beta and My netgear nighthawk router interface not showing most of the content but the public release did.

On 10/9/2020 8:24 PM, Rick Miller wrote:

After I got the e-mail meeting invitation which I sent to myself since it is a church meeting only I plan to join via Zoom, I opened it up and there was the page with all the details.  I then hit the Alt key to open up the Appointment tab.  I tabbed several times until I heard “Calendar,” and hit the Enter key.  When I did this the meeting information posted immediately to my Outlook calendar.  I tabbed past the day and time and the notification that this is an all-day meeting, which I did not check.  Then after I hit the tab key again, which put me on the field where additional comments are added, there was the name of the meeting, the day, time, and the hyperlink to join.  When I hit the Enter key on the hyperlink nothing happened, even though JAWS did say the word “Hyperlink.”  I then hit Insert+F7 which is the keystroke for all links and JAWS spoke that there were no links and instructed me to hit Insert+F5.  When I did, the hyperlink popped up.  I tabbed once and when I heard JAWS say OK I hit the Enter key.  I then tried again to hit the Enter key on the hyperlink in the appointment field but again, nothing happened.  And when I hit Insert+F7 JAWS again said that there were no links.  The version of Windows I am using is Windows 10, and I am using the JAWS Beta version.

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Randy Barnett
Sent: Friday, October 09, 2020 8:09 PM
To: main@jfw.groups.io
Subject: Re: I Cannot Join Zoom Meeting from my Outlook Calendar

 

Make sure you got the entire hyperlink that you didn’t cut off any of the text at the end beginning or anywhere else for that matter! :-) LOL

Randy Barnett


On Oct 9, 2020, at 7:48 PM, Rick Miller <rm1263@...> wrote:



Dear Listers:

 

I am trying to join a Zoom meeting from my Outlook calendar.  After I schedule the meeting and paste it to my Outlook calendar, the hyperlink is there in the calendar appointment but when I try to activate the link using the Insert+F7 keystroke it is saying that no link is there and that I should press Insert+f5.  When I do this the hyperlink appears.  I tab to OK and hit the Enter key but that still does not solve the problem.  The version of Outlook I am using is Outlook 2010 but I do have a Zoom plug-in installed and so I am able to schedule a Zoom meeting from Outlook.  I am trying to insert on my Outlook calendar a weekly Zoom class at church.  I got the hyperlink to join the Zoom meeting from someone at church.  I scheduled the meeting and sent it to my own e-mail address, and on the invitation message whenever I hit the Enter key on the hyperlink to join I can join with no trouble, but after I paste it to my Outlook calendar and then try to join from the Appointment tab on the calendar the hyperlink doesn’t work.  Do any of you out there know how I can get the hyperlink on the calendar to working?

 

 

Rick Miller

 


moderated Outlook issues

kevin meyers
 

Hello,

 

I’m using the most recent versions of Outlook2016 and Jaws2020. When I’m in the calendar, I use to be able to tab to get from one event to the other. For some reason it now says “day view” and then the appointment. There are day there are no events and Jaws still reads “day view and the time is from the day I’m on to the next day.

 

Is there a way for this not to happen and just the event is read and days that don’t have anything are skipped?

 

I added another email address. When I move to the address inbox it says “group by expanded date yesterday”. I have to arrow down twice before any emails appear. The other email address that are setup in Outlook don’t do this. What can I do so the group view doesn’t show up?

 

Thanks,

 

Kevin

 

 


moderated Re: I Cannot Join Zoom Meeting from my Outlook Calendar

Cynthia Bruce
 

I have found that I have to go into the notes in Outlook where the entire invitation appears and navigate to the link. When I do that, I then hit shift F10 to bring up the context menu and go to open the link. Often, that is the only way it will work. Hope this helps.


On Oct 10, 2020, at 1:18 AM, Randy Barnett <blindmansbluff09@...> wrote:



Well, try the public release of Jaws. As  I just had an issue with the Beta and My netgear nighthawk router interface not showing most of the content but the public release did.

On 10/9/2020 8:24 PM, Rick Miller wrote:

After I got the e-mail meeting invitation which I sent to myself since it is a church meeting only I plan to join via Zoom, I opened it up and there was the page with all the details.  I then hit the Alt key to open up the Appointment tab.  I tabbed several times until I heard “Calendar,” and hit the Enter key.  When I did this the meeting information posted immediately to my Outlook calendar.  I tabbed past the day and time and the notification that this is an all-day meeting, which I did not check.  Then after I hit the tab key again, which put me on the field where additional comments are added, there was the name of the meeting, the day, time, and the hyperlink to join.  When I hit the Enter key on the hyperlink nothing happened, even though JAWS did say the word “Hyperlink.”  I then hit Insert+F7 which is the keystroke for all links and JAWS spoke that there were no links and instructed me to hit Insert+F5.  When I did, the hyperlink popped up.  I tabbed once and when I heard JAWS say OK I hit the Enter key.  I then tried again to hit the Enter key on the hyperlink in the appointment field but again, nothing happened.  And when I hit Insert+F7 JAWS again said that there were no links.  The version of Windows I am using is Windows 10, and I am using the JAWS Beta version.

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Randy Barnett
Sent: Friday, October 09, 2020 8:09 PM
To: main@jfw.groups.io
Subject: Re: I Cannot Join Zoom Meeting from my Outlook Calendar

 

Make sure you got the entire hyperlink that you didn’t cut off any of the text at the end beginning or anywhere else for that matter! :-) LOL

Randy Barnett


On Oct 9, 2020, at 7:48 PM, Rick Miller <rm1263@...> wrote:



Dear Listers:

 

I am trying to join a Zoom meeting from my Outlook calendar.  After I schedule the meeting and paste it to my Outlook calendar, the hyperlink is there in the calendar appointment but when I try to activate the link using the Insert+F7 keystroke it is saying that no link is there and that I should press Insert+f5.  When I do this the hyperlink appears.  I tab to OK and hit the Enter key but that still does not solve the problem.  The version of Outlook I am using is Outlook 2010 but I do have a Zoom plug-in installed and so I am able to schedule a Zoom meeting from Outlook.  I am trying to insert on my Outlook calendar a weekly Zoom class at church.  I got the hyperlink to join the Zoom meeting from someone at church.  I scheduled the meeting and sent it to my own e-mail address, and on the invitation message whenever I hit the Enter key on the hyperlink to join I can join with no trouble, but after I paste it to my Outlook calendar and then try to join from the Appointment tab on the calendar the hyperlink doesn’t work.  Do any of you out there know how I can get the hyperlink on the calendar to working?

 

 

Rick Miller

 


moderated Re: Jaws 2021 and emoji panel

Randy Barnett
 

 you access the IMG panel by pressing windows key and period At the same time. Narrator doesn’t have a screen curtain as far as I know. But then again you can just turn off your monitor. That’s what I do.

Randy Barnett

On Oct 10, 2020, at 6:39 AM, Afik Souffir <afik.souffir@...> wrote:



 

How do you access emoji panel?

Speaking of narrator, does it's have screen curtain? I can see light, and its not nice to my eyes.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, October 10, 2020 4:37 PM
To: main@jfw.groups.io
Subject: Jaws 2021 and emoji panel

 

I find I have to use Narrator to arrow through the emoji panel, and after picking one, Narrator reads the emoji just fine.

Jaws 2021 reads a number.

I sent a note to a friend who has a great job at a place where it is not uncommon for the office to go out for a drink at 3 PM to end the day.  So I used the whiskey glass emoji.  Narrator reads it accurately.  Jaws 2021 says “twelve.”

 

Any thoughts about how Jaws can be made to speak the emoji?

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Jaws 2021 and emoji panel

Afik Souffir
 

I just did a google search, I don't think its such thing, but I'll check with Microsoft disability.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, October 10, 2020 4:45 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 and emoji panel

 

The Emoji panel is accessed with pressing the Windows key plus the period.

Then, you have to arrow around to get into the categories and pick the category then you can arrow through the list of emoji.

 

I do not know if Narrator has a screen curtain.

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Afik Souffir
Sent: Saturday, October 10, 2020 6:40 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 and emoji panel

 

 

How do you access emoji panel?

Speaking of narrator, does it's have screen curtain? I can see light, and its not nice to my eyes.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, October 10, 2020 4:37 PM
To: main@jfw.groups.io
Subject: Jaws 2021 and emoji panel

 

I find I have to use Narrator to arrow through the emoji panel, and after picking one, Narrator reads the emoji just fine.

Jaws 2021 reads a number.

I sent a note to a friend who has a great job at a place where it is not uncommon for the office to go out for a drink at 3 PM to end the day.  So I used the whiskey glass emoji.  Narrator reads it accurately.  Jaws 2021 says “twelve.”

 

Any thoughts about how Jaws can be made to speak the emoji?

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Jaws 2021 and emoji panel

Richard Turner
 

The Emoji panel is accessed with pressing the Windows key plus the period.

Then, you have to arrow around to get into the categories and pick the category then you can arrow through the list of emoji.

 

I do not know if Narrator has a screen curtain.

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Afik Souffir
Sent: Saturday, October 10, 2020 6:40 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 and emoji panel

 

 

How do you access emoji panel?

Speaking of narrator, does it's have screen curtain? I can see light, and its not nice to my eyes.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, October 10, 2020 4:37 PM
To: main@jfw.groups.io
Subject: Jaws 2021 and emoji panel

 

I find I have to use Narrator to arrow through the emoji panel, and after picking one, Narrator reads the emoji just fine.

Jaws 2021 reads a number.

I sent a note to a friend who has a great job at a place where it is not uncommon for the office to go out for a drink at 3 PM to end the day.  So I used the whiskey glass emoji.  Narrator reads it accurately.  Jaws 2021 says “twelve.”

 

Any thoughts about how Jaws can be made to speak the emoji?

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Jaws 2021 and emoji panel

Afik Souffir
 

 

How do you access emoji panel?

Speaking of narrator, does it's have screen curtain? I can see light, and its not nice to my eyes.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Saturday, October 10, 2020 4:37 PM
To: main@jfw.groups.io
Subject: Jaws 2021 and emoji panel

 

I find I have to use Narrator to arrow through the emoji panel, and after picking one, Narrator reads the emoji just fine.

Jaws 2021 reads a number.

I sent a note to a friend who has a great job at a place where it is not uncommon for the office to go out for a drink at 3 PM to end the day.  So I used the whiskey glass emoji.  Narrator reads it accurately.  Jaws 2021 says “twelve.”

 

Any thoughts about how Jaws can be made to speak the emoji?

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Jaws 2021 and emoji panel

Richard Turner
 

I find I have to use Narrator to arrow through the emoji panel, and after picking one, Narrator reads the emoji just fine.

Jaws 2021 reads a number.

I sent a note to a friend who has a great job at a place where it is not uncommon for the office to go out for a drink at 3 PM to end the day.  So I used the whiskey glass emoji.  Narrator reads it accurately.  Jaws 2021 says “twelve.”

 

Any thoughts about how Jaws can be made to speak the emoji?

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Edge Question

Pastor Gilbert Pries <gilp@...>
 

Okay,

First open Edge.

Next make sure your on your home page.

Next press alt f and s to go to settings.

Next tab once and arrrow down to onstartup.

Next press enter.

Next tab once and arrow down to open to a specific page and tab until you get to a button that will clear all tabs except the one you have opened.

Push that button and that's it.

 

Pastor Gilbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Saturday, October 10, 2020 2:59 AM
To: main@jfw.groups.io
Subject: Re: Edge Question

 

Pastor Gilbert:

 

Why not share your knowledge with the list, In that way, many users can, may or, will benefit.

 

Dave

 

----- Original Message -----

Sent: Friday, October 9, 2020 7:51 PM

Subject: Edge Question

 

Mike,

Call me and I will show you how to just have 1 page oppen.

 

Pastor Gilbert


moderated Re: Edge Question

Dave Durber
 

Pastor Gilbert:
 
Why not share your knowledge with the list, In that way, many users can, may or, will benefit.
 
Dave
 

----- Original Message -----
Sent: Friday, October 9, 2020 7:51 PM
Subject: Edge Question

Mike,

Call me and I will show you how to just have 1 page oppen.

 

Pastor Gilbert


moderated Re: I Cannot Join Zoom Meeting from my Outlook Calendar

Randy Barnett
 

Well, try the public release of Jaws. As  I just had an issue with the Beta and My netgear nighthawk router interface not showing most of the content but the public release did.

On 10/9/2020 8:24 PM, Rick Miller wrote:

After I got the e-mail meeting invitation which I sent to myself since it is a church meeting only I plan to join via Zoom, I opened it up and there was the page with all the details.  I then hit the Alt key to open up the Appointment tab.  I tabbed several times until I heard “Calendar,” and hit the Enter key.  When I did this the meeting information posted immediately to my Outlook calendar.  I tabbed past the day and time and the notification that this is an all-day meeting, which I did not check.  Then after I hit the tab key again, which put me on the field where additional comments are added, there was the name of the meeting, the day, time, and the hyperlink to join.  When I hit the Enter key on the hyperlink nothing happened, even though JAWS did say the word “Hyperlink.”  I then hit Insert+F7 which is the keystroke for all links and JAWS spoke that there were no links and instructed me to hit Insert+F5.  When I did, the hyperlink popped up.  I tabbed once and when I heard JAWS say OK I hit the Enter key.  I then tried again to hit the Enter key on the hyperlink in the appointment field but again, nothing happened.  And when I hit Insert+F7 JAWS again said that there were no links.  The version of Windows I am using is Windows 10, and I am using the JAWS Beta version.

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Randy Barnett
Sent: Friday, October 09, 2020 8:09 PM
To: main@jfw.groups.io
Subject: Re: I Cannot Join Zoom Meeting from my Outlook Calendar

 

Make sure you got the entire hyperlink that you didn’t cut off any of the text at the end beginning or anywhere else for that matter! :-) LOL

Randy Barnett


On Oct 9, 2020, at 7:48 PM, Rick Miller <rm1263@...> wrote:



Dear Listers:

 

I am trying to join a Zoom meeting from my Outlook calendar.  After I schedule the meeting and paste it to my Outlook calendar, the hyperlink is there in the calendar appointment but when I try to activate the link using the Insert+F7 keystroke it is saying that no link is there and that I should press Insert+f5.  When I do this the hyperlink appears.  I tab to OK and hit the Enter key but that still does not solve the problem.  The version of Outlook I am using is Outlook 2010 but I do have a Zoom plug-in installed and so I am able to schedule a Zoom meeting from Outlook.  I am trying to insert on my Outlook calendar a weekly Zoom class at church.  I got the hyperlink to join the Zoom meeting from someone at church.  I scheduled the meeting and sent it to my own e-mail address, and on the invitation message whenever I hit the Enter key on the hyperlink to join I can join with no trouble, but after I paste it to my Outlook calendar and then try to join from the Appointment tab on the calendar the hyperlink doesn’t work.  Do any of you out there know how I can get the hyperlink on the calendar to working?

 

 

Rick Miller

 


moderated Re: I Cannot Join Zoom Meeting from my Outlook Calendar

Rick Miller
 

After I got the e-mail meeting invitation which I sent to myself since it is a church meeting only I plan to join via Zoom, I opened it up and there was the page with all the details.  I then hit the Alt key to open up the Appointment tab.  I tabbed several times until I heard “Calendar,” and hit the Enter key.  When I did this the meeting information posted immediately to my Outlook calendar.  I tabbed past the day and time and the notification that this is an all-day meeting, which I did not check.  Then after I hit the tab key again, which put me on the field where additional comments are added, there was the name of the meeting, the day, time, and the hyperlink to join.  When I hit the Enter key on the hyperlink nothing happened, even though JAWS did say the word “Hyperlink.”  I then hit Insert+F7 which is the keystroke for all links and JAWS spoke that there were no links and instructed me to hit Insert+F5.  When I did, the hyperlink popped up.  I tabbed once and when I heard JAWS say OK I hit the Enter key.  I then tried again to hit the Enter key on the hyperlink in the appointment field but again, nothing happened.  And when I hit Insert+F7 JAWS again said that there were no links.  The version of Windows I am using is Windows 10, and I am using the JAWS Beta version.

 

 

Rick Miller

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Randy Barnett
Sent: Friday, October 09, 2020 8:09 PM
To: main@jfw.groups.io
Subject: Re: I Cannot Join Zoom Meeting from my Outlook Calendar

 

Make sure you got the entire hyperlink that you didn’t cut off any of the text at the end beginning or anywhere else for that matter! :-) LOL

Randy Barnett


On Oct 9, 2020, at 7:48 PM, Rick Miller <rm1263@...> wrote:



Dear Listers:

 

I am trying to join a Zoom meeting from my Outlook calendar.  After I schedule the meeting and paste it to my Outlook calendar, the hyperlink is there in the calendar appointment but when I try to activate the link using the Insert+F7 keystroke it is saying that no link is there and that I should press Insert+f5.  When I do this the hyperlink appears.  I tab to OK and hit the Enter key but that still does not solve the problem.  The version of Outlook I am using is Outlook 2010 but I do have a Zoom plug-in installed and so I am able to schedule a Zoom meeting from Outlook.  I am trying to insert on my Outlook calendar a weekly Zoom class at church.  I got the hyperlink to join the Zoom meeting from someone at church.  I scheduled the meeting and sent it to my own e-mail address, and on the invitation message whenever I hit the Enter key on the hyperlink to join I can join with no trouble, but after I paste it to my Outlook calendar and then try to join from the Appointment tab on the calendar the hyperlink doesn’t work.  Do any of you out there know how I can get the hyperlink on the calendar to working?

 

 

Rick Miller

 


moderated Re: testing to see if the bounce issue is fixed.

Robin Frost
 

Hi,

I wonder if they had an issue because I got that message the other day as did another friend of mine.  Ever since all seems to have returned to normal here.

Take good care.

Robin

On 10/9/2020 5:54 PM, Richard Turner wrote:

I got a message from groups.io that my messages were bouncing.

Very strange.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: I Cannot Join Zoom Meeting from my Outlook Calendar

Randy Barnett
 

Make sure you got the entire hyperlink that you didn’t cut off any of the text at the end beginning or anywhere else for that matter! :-) LOL

Randy Barnett

On Oct 9, 2020, at 7:48 PM, Rick Miller <rm1263@...> wrote:



Dear Listers:

 

I am trying to join a Zoom meeting from my Outlook calendar.  After I schedule the meeting and paste it to my Outlook calendar, the hyperlink is there in the calendar appointment but when I try to activate the link using the Insert+F7 keystroke it is saying that no link is there and that I should press Insert+f5.  When I do this the hyperlink appears.  I tab to OK and hit the Enter key but that still does not solve the problem.  The version of Outlook I am using is Outlook 2010 but I do have a Zoom plug-in installed and so I am able to schedule a Zoom meeting from Outlook.  I am trying to insert on my Outlook calendar a weekly Zoom class at church.  I got the hyperlink to join the Zoom meeting from someone at church.  I scheduled the meeting and sent it to my own e-mail address, and on the invitation message whenever I hit the Enter key on the hyperlink to join I can join with no trouble, but after I paste it to my Outlook calendar and then try to join from the Appointment tab on the calendar the hyperlink doesn’t work.  Do any of you out there know how I can get the hyperlink on the calendar to working?

 

 

Rick Miller

 


moderated auto complete in Excel not working

Denise J Moses
 

After my computer updated auto complete in Excel 2016 quit working.  I am using JAWS 2018.  2020 won’t work at all with this feature.  I type in frequently used words in my checkbook register so I don’t have to type the whole word.  Also the read column title won’t stay inacted.  I have to keep going into quick setting & turn it back on again.  Can I fix these 2 issues?

Denise

7661 - 7680 of 90165