|
moderated
Re: fs Cast and Q-cast.
You don’t even get any support for it and haven’t for years.
|
|
|
Panagiotis Antonopoulos
Indeed, jaws just says “version”.
From: main@jfw.groups.io On Behalf Of Richard Turner
Sent: Friday, June 26, 2020 12:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer Milton, How did you get the version number? I tried with Jaws and got a big nothing. "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
On Jun 25, 2020, at 1:37 PM, Milton Ota <mota1252@...> wrote:
The latest version of Team Viewer is: Version:15.7.6 Date: Jun 22 2020 Milton Which version of TeamViewer are you using? I think the current version is 15x! I just want to be sure that this version is correct. As far as I know I don't think that there are any jaws scripts for this version. -----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer
Thanks, I’m sure this will help if I need to use it again. I am using the free version. The combination of Skype and Teamviewer allowed him to direct me to what I needed to do. But, Teamviewer could use some help and/or Jaws scripts. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert Hi Richard, When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field. Tab to: “Password: and provide the password that is generated. This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license. Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect. I hope this is helpful information. Milton I would like to know that as well. Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information. I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection. At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way. But I would say that whatever the current version of Teamviewer is, it isn’t very accessible. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio. Richard, Team Viewer and JAWS 2020 was accessible when used a few weeks ago. Dan I need to use Teamviewer to get help on a braille display from the company. Are there scripts for the latest Teamviewer and Jaws 2020? The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015. Any help would be appreciated. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
|
|
|
I did in an earlier version, I can't remember which version, between 9 & 11.
I just haven't had the need to take control of someone's computer, who did
not have Jaws or NVDA, since that time.
Glenn
toggle quoted messageShow quoted text
----- Original Message ----- From: "Panagiotis Antonopoulos" <pantonop2856@gmail.com> To: <main@jfw.groups.io> Sent: Friday, June 26, 2020 12:58 AM Subject: Re: Teamviewer Hi David/all, I am sorry to have come late on this, but I am involved with constant oral exams and this takes a very long proportion of my day. If what you want is simply get someone control your computer, you just don't need any scripts or additional help. The important thing is to know the partner id of your team viewer, easily found on a system tray icon if you have one. Otherwise, assuming you have a desktop icon of the program, simply open it, and shift-tab two three times to get this number and one tab forward, locate the temporary password which you should also dictate to that person. Once he/she has entered that info, he/she has control over your computer. However, I don't think you can do the reverse as a blind user, i.e. take control of someone else's computer. I am using team viewer very very frequently with various people. Hope this helps, Takis -----Original Message----- From: main@jfw.groups.io On Behalf Of David Ingram Sent: Thursday, June 25, 2020 10:43 PM To: main@jfw.groups.io Subject: Re: Teamviewer are there jaws scripts for TeamViewer version 15x? -----Original Message----- From: Mario <mrb620@hotmail.com>
Sent: Jun 25, 2020 1:14 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer
Richard, check out https://dlee.org/teamviewer/ for scripts for JAWS.
-------- Original Message --------
From: Richard Turner [mailto:richardturner42@outlook.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Thursday, June 25, 2020, 1:47 PM
Subject: Teamviewer
Thanks, I’m sure this will help if I need to use it again. I am using
the free version.
The combination of Skype and Teamviewer allowed him to direct me to
what I needed to do.
But, Teamviewer could use some help and/or Jaws scripts.
Richard
"He that cannot forgive others breaks the bridge over which he must
pass himself,” and we forget that only grace can break the cycle of
ancient hatreds among peoples. (It is notable that while I have
regretted not granting grace to others, I’ve never once regretted
extending it.)" - Edward Herbert
*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Milton
Ota
*Sent:* Thursday, June 25, 2020 8:42 AM
*To:* main@jfw.groups.io
*Subject:* Re: Teamviewer
Hi Richard,
When you first open Team viewer, you will need to tab down to a field
that says: “Your ID:” and provide the person that will control your
computer the digits in that field.
Tab to: “Password: and provide the password that is generated.
This only will work if you are using the Team Viewer as a free version.
I’m not sure what happens if you purchased a license.
Once the person connecting to your computer has entered those pieces of
information they should be connected and be able to take over. You
should be on the phone if there is something specific that you are
looking for help with if the person is not very familiar with your
computer setup. You don’t have to unload JAWS and if you need to take
control, the helper can let you take over and you don’t need to disconnect.
I hope this is helpful information.
Milton
*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Richard
Turner
*Sent:* Thursday, June 25, 2020 10:21 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer
I would like to know that as well.
Teamviewer is not very accessible at all, and the Jaws command to
identify the version just says “version” with no information.
I couldn’t figure out how to give access to a technician to take
control of my computer and could barely deal with the connection.
At least, between Teamviewer and Skype he was able to direct me to the
braille driver that was getting in the way.
But I would say that whatever the current version of Teamviewer is, it
isn’t very accessible.
Richard
"He that cannot forgive others breaks the bridge over which he must
pass himself,” and we forget that only grace can break the cycle of
ancient hatreds among peoples. (It is notable that while I have
regretted not granting grace to others, I’ve never once regretted
extending it.)" - Edward Herbert
*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of
*Sieghard Weitzel
*Sent:* Thursday, June 25, 2020 7:58 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer
Which version of Teamviewer are you using that is accessible, there
seem to be many and I know even technical support people often ask to
go to the Teamviewer website and ask you to download an older versio.
*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Dan
Longmore
*Sent:* Wednesday, June 24, 2020 9:02 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer
Richard,
Team Viewer and JAWS 2020 was accessible when used a few weeks ago.
Dan
*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Richard
Turner
*Sent:* Wednesday, June 24, 2020 10:40 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Teamviewer
I need to use Teamviewer to get help on a braille display from the company.
Are there scripts for the latest Teamviewer and Jaws 2020?
The Doug Lee scripts don’t think I have any compatible Jaws, but then
again, those scripts are from 2015.
Any help would be appreciated.
Richard
"He that cannot forgive others breaks the bridge over which he must
pass himself,” and we forget that only grace can break the cycle of
ancient hatreds among peoples. (It is notable that while I have
regretted not granting grace to others, I’ve never once regretted
extending it.)" - Edward Herbert
|
|
|
Panagiotis Antonopoulos
Hi David/all,
I am sorry to have come late on this, but I am involved with constant oral exams and this takes a very long proportion of my day. If what you want is simply get someone control your computer, you just don't need any scripts or additional help. The important thing is to know the partner id of your team viewer, easily found on a system tray icon if you have one. Otherwise, assuming you have a desktop icon of the program, simply open it, and shift-tab two three times to get this number and one tab forward, locate the temporary password which you should also dictate to that person. Once he/she has entered that info, he/she has control over your computer. However, I don't think you can do the reverse as a blind user, i.e. take control of someone else's computer. I am using team viewer very very frequently with various people.
Hope this helps,
Takis
toggle quoted messageShow quoted text
-----Original Message----- From: main@jfw.groups.io On Behalf Of David Ingram Sent: Thursday, June 25, 2020 10:43 PM To: main@jfw.groups.io Subject: Re: Teamviewer are there jaws scripts for TeamViewer version 15x? -----Original Message----- From: Mario <mrb620@hotmail.com>
Sent: Jun 25, 2020 1:14 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer
Richard, check out https://dlee.org/teamviewer/ for scripts for JAWS.
-------- Original Message --------
From: Richard Turner [mailto:richardturner42@outlook.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Thursday, June 25, 2020, 1:47 PM
Subject: Teamviewer
Thanks, I’m sure this will help if I need to use it again. I am using
the free version.
The combination of Skype and Teamviewer allowed him to direct me to
what I needed to do.
But, Teamviewer could use some help and/or Jaws scripts.
Richard
"He that cannot forgive others breaks the bridge over which he must
pass himself,” and we forget that only grace can break the cycle of
ancient hatreds among peoples. (It is notable that while I have
regretted not granting grace to others, I’ve never once regretted
extending it.)" - Edward Herbert
*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *Milton
Ota
*Sent:* Thursday, June 25, 2020 8:42 AM
*To:* main@jfw.groups.io
*Subject:* Re: Teamviewer
Hi Richard,
When you first open Team viewer, you will need to tab down to a field
that says: “Your ID:” and provide the person that will control your
computer the digits in that field.
Tab to: “Password: and provide the password that is generated.
This only will work if you are using the Team Viewer as a free version.
I’m not sure what happens if you purchased a license.
Once the person connecting to your computer has entered those pieces of
information they should be connected and be able to take over. You
should be on the phone if there is something specific that you are
looking for help with if the person is not very familiar with your
computer setup. You don’t have to unload JAWS and if you need to take
control, the helper can let you take over and you don’t need to disconnect.
I hope this is helpful information.
Milton
*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Richard
Turner
*Sent:* Thursday, June 25, 2020 10:21 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer
I would like to know that as well.
Teamviewer is not very accessible at all, and the Jaws command to
identify the version just says “version” with no information.
I couldn’t figure out how to give access to a technician to take
control of my computer and could barely deal with the connection.
At least, between Teamviewer and Skype he was able to direct me to the
braille driver that was getting in the way.
But I would say that whatever the current version of Teamviewer is, it
isn’t very accessible.
Richard
"He that cannot forgive others breaks the bridge over which he must
pass himself,” and we forget that only grace can break the cycle of
ancient hatreds among peoples. (It is notable that while I have
regretted not granting grace to others, I’ve never once regretted
extending it.)" - Edward Herbert
*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of
*Sieghard Weitzel
*Sent:* Thursday, June 25, 2020 7:58 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer
Which version of Teamviewer are you using that is accessible, there
seem to be many and I know even technical support people often ask to
go to the Teamviewer website and ask you to download an older versio.
*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Dan
Longmore
*Sent:* Wednesday, June 24, 2020 9:02 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Re: Teamviewer
Richard,
Team Viewer and JAWS 2020 was accessible when used a few weeks ago.
Dan
*From:* main@jfw.groups.io <mailto:main@jfw.groups.io>
<main@jfw.groups.io <mailto:main@jfw.groups.io>> *On Behalf Of *Richard
Turner
*Sent:* Wednesday, June 24, 2020 10:40 AM
*To:* main@jfw.groups.io <mailto:main@jfw.groups.io>
*Subject:* Teamviewer
I need to use Teamviewer to get help on a braille display from the company.
Are there scripts for the latest Teamviewer and Jaws 2020?
The Doug Lee scripts don’t think I have any compatible Jaws, but then
again, those scripts are from 2015.
Any help would be appreciated.
Richard
"He that cannot forgive others breaks the bridge over which he must
pass himself,” and we forget that only grace can break the cycle of
ancient hatreds among peoples. (It is notable that while I have
regretted not granting grace to others, I’ve never once regretted
extending it.)" - Edward Herbert
|
|
|
moderated
Re: notifications
Bill White <billwhite92701@...>
It's Windows Key plus A. To read a notification that is only a few seconds old, press Windows key plus SHIFT plus V. Bill White billwhite92701@...
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of HH. Smith Jr.
Sent: Thursday, June 25, 2020 8:06 PM
To: jfw@groups.io
Subject: notifications Hi, I am having a brain freeze moment. Can anyone remember the htt key to use to get to the notifications. I think it had something to do with the “A” key. I could be wrong.
|
|
|
Hi, I am having a brain freeze moment. Can anyone remember the htt key to use to get to the notifications. I think it had something to do with the “A” key. I could be wrong.
|
|
|
moderated
Re: fs Cast and Q-cast.
If your using the new edge, you press f6 and your given the download options. Tell it to keep the download. If it’s already downloaded, you press the more options button on the block notification and select run anyway.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of james hooper Sent: Thursday, June 25, 2020 8:51 PM To: main@jfw.groups.io Subject: Re: fs Cast and Q-cast. So how do I over come that? It’s probably because it’s not well known to smart screen so it’s going to be blocked. Tried to download it said it was blocked cause it might harm my system. Yes, it is. Here’s the site that it’s on. www.nathantech.net I have never heard of Lunar RSS - is it Screenreader accessible? I might check it out myself if it is. David Griffith On 25 Jun 2020, at 22:08, david Jennette <dcjenn@...> wrote: Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also. This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search. You would certainly find no difficulty locating FSCast from a number of sources in the program. There is an optional ` ` additional app called VI Podcast which you can download from within the app This supports the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps use different databases for accessing Podcasts. FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app. You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful However in the audio demonstration I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected. Honostly, I think you should look for another podcast player. I don’t think QCast is being developed anymore. Sent from Mail for Windows 10 Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.
|
|
|
moderated
Re: fs Cast and Q-cast.
So how do I over come that?
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of david Jennette Sent: Thursday, June 25, 2020 7:47 PM To: main@jfw.groups.io Subject: Re: fs Cast and Q-cast. It’s probably because it’s not well known to smart screen so it’s going to be blocked. Tried to download it said it was blocked cause it might harm my system. Yes, it is. Here’s the site that it’s on. www.nathantech.net I have never heard of Lunar RSS - is it Screenreader accessible? I might check it out myself if it is. David Griffith On 25 Jun 2020, at 22:08, david Jennette <dcjenn@...> wrote: Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also. This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search. You would certainly find no difficulty locating FSCast from a number of sources in the program. There is an optional ` ` additional app called VI Podcast which you can download from within the app This supports the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps use different databases for accessing Podcasts. FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app. You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful. However in the audio demonstration I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected. Honostly, I think you should look for another podcast player. I don’t think QCast is being developed anymore. Sent from Mail for Windows 10 Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.
|
|
|
moderated
Re: fs Cast and Q-cast.
It’s probably because it’s not well known to smart screen so it’s going to be blocked.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of james hooper Sent: Thursday, June 25, 2020 6:49 PM To: main@jfw.groups.io Subject: Re: fs Cast and Q-cast. Tried to download it said it was blocked cause it might harm my system. Yes, it is. Here’s the site that it’s on. www.nathantech.net I have never heard of Lunar RSS - is it Screenreader accessible? I might check it out myself if it is. David Griffith On 25 Jun 2020, at 22:08, david Jennette <dcjenn@...> wrote: Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also. This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search. You would certainly find no difficulty locating FSCast from a number of sources in the program. There is an optional ` ` additional app called VI Podcast which you can download from within the app This supports the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps use different databases for accessing Podcasts. FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app. You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful. However in the audio demonstration I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected. Honostly, I think you should look for another podcast player. I don’t think QCast is being developed anymore. Sent from Mail for Windows 10 Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.
|
|
|
moderated
Re: fs Cast and Q-cast.
Tried to download it said it was blocked cause it might harm my system.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of david Jennette Sent: Thursday, June 25, 2020 4:39 PM To: main@jfw.groups.io Subject: Re: fs Cast and Q-cast. Yes, it is. Here’s the site that it’s on. www.nathantech.net I have never heard of Lunar RSS - is it Screenreader accessible? I might check it out myself if it is. David Griffith On 25 Jun 2020, at 22:08, david Jennette <dcjenn@...> wrote: Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also. This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search. You would certainly find no difficulty locating FSCast from a number of sources in the program. There is an optional ` ` additional app called VI Podcast which you can download from within the app This supports the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps use different databases for accessing Podcasts. FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app. You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful. However in the audio demonstration I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected. Honostly, I think you should look for another podcast player. I don’t think QCast is being developed anymore. Sent from Mail for Windows 10 Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.
|
|
|
moderated
modify spoken symbols
#jaws
hello dears
when i tried to modify some spoken symbols on *.sbl
i didn't know how i convert hex to get 8 binary number, and jaws didn't accept modification without this 8 numbers.
i'm using notepad plus plus
another point, i noticed that Latin alphapits not found in this file, why?
any help will be appreciated.
thanks very much
|
|
|
moderated
Re: fs Cast and Q-cast.
Larry Gassman <larrygassman@...>
I’ve been looking for a good accessible Podcatcher. Brian Hartgen now has one with Leasey. I’ll also check out these two for FSCast and much much more. Larry
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of david Jennette Sent: Thursday, June 25, 2020 3:39 PM To: main@jfw.groups.io Subject: Re: fs Cast and Q-cast. Yes, it is. Here’s the site that it’s on. www.nathantech.net I have never heard of Lunar RSS - is it Screenreader accessible? I might check it out myself if it is. David Griffith On 25 Jun 2020, at 22:08, david Jennette <dcjenn@...> wrote: Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also. This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search. You would certainly find no difficulty locating FSCast from a number of sources in the program. There is an optional ` ` additional app called VI Podcast which you can download from within the app This supports the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps use different databases for accessing Podcasts. FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app. You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful. However in the audio demonstration I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected. Honostly, I think you should look for another podcast player. I don’t think QCast is being developed anymore. Sent from Mail for Windows 10 Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.
|
|
|
moderated
Re: fs Cast and Q-cast.
Yes, it is. Here’s the site that it’s on. www.nathantech.net
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith Sent: Thursday, June 25, 2020 5:25 PM To: main@jfw.groups.io Subject: Re: fs Cast and Q-cast. I have never heard of Lunar RSS - is it Screenreader accessible? I might check it out myself if it is. David Griffith
On 25 Jun 2020, at 22:08, david Jennette <dcjenn@...> wrote: Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also. This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search. You would certainly find no difficulty locating FSCast from a number of sources in the program. There is an optional ` ` additional app called VI Podcast which you can download from within the app This supports the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps use different databases for accessing Podcasts. FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app. You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful. However in the audio demonstration I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected. Honostly, I think you should look for another podcast player. I don’t think QCast is being developed anymore. Sent from Mail for Windows 10 Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.
|
|
|
moderated
Re: fs Cast and Q-cast.
I have never heard of Lunar RSS - is it Screenreader accessible? I might check it out myself if it is.
On 25 Jun 2020, at 22:08, david Jennette < dcjenn@...> wrote:
Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also. This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search. You would certainly find no difficulty locating FSCast from a number of sources in the program. There is an optional ` ` additional app called VI Podcast which you can download from within the app This supports the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps use different databases for accessing Podcasts. FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app. You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful. However in the audio demonstration I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected.
Honostly, I think you should look for another podcast player. I don’t think QCast is being developed anymore. Sent from Mail for Windows 10 Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.
|
|
|
Yep, I don’t use it much other than for solving Captcha and getting help with programs that are not keyboard friendly with JAWS. Take cfare, keep safe. Milton
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner Sent: Thursday, June 25, 2020 5:04 PM To: main@jfw.groups.io Subject: Re: Teamviewer OK, pretty much the same here. If I am lucky, I won’t need Teamviewer again for a long time. Thanks, Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 2:58 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer Hi Richard, I’m using JAWS Version Home Use Edition Version 2020.2006.12 on a Dell computer with an i7 processor and the Windows May update. Milton I am using Jaws Home 2020, on a Del laptop running Windows 10 Home 64bit 2004 version. I get nothing from the help button. However, if I put Jaws into speak on command and launch narrator, I can read the version number. Are you using either Jaws Pro, or Windows Pro? I’m trying to sort out the difference. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert Here are the steps I used to get the version number: Open Team viewer, use control – Home to take the cursor to the top. Tab to the Help Button, Press the spacebar to get the Context Menu. Arrow up once and press Enter on About. Using the JAWS Key – V when the program is opened did not seem to work. HTH. Milton Milton, How did you get the version number? I tried with Jaws and got a big nothing. "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert On Jun 25, 2020, at 1:37 PM, Milton Ota <mota1252@...> wrote:
The latest version of Team Viewer is: Version:15.7.6 Date: Jun 22 2020 Milton Which version of TeamViewer are you using? I think the current version is 15x! I just want to be sure that this version is correct. As far as I know I don't think that there are any jaws scripts for this version. -----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer Thanks, I’m sure this will help if I need to use it again. I am using the free version. The combination of Skype and Teamviewer allowed him to direct me to what I needed to do. But, Teamviewer could use some help and/or Jaws scripts. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert Hi Richard, When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field. Tab to: “Password: and provide the password that is generated. This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license. Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect. I hope this is helpful information. Milton I would like to know that as well. Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information. I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection. At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way. But I would say that whatever the current version of Teamviewer is, it isn’t very accessible. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio. Richard, Team Viewer and JAWS 2020 was accessible when used a few weeks ago. Dan I need to use Teamviewer to get help on a braille display from the company. Are there scripts for the latest Teamviewer and Jaws 2020? The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015. Any help would be appreciated. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
|
|
|
OK, pretty much the same here.
If I am lucky, I won’t need Teamviewer again for a long time.
Thanks,
Richard
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted
not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
toggle quoted messageShow quoted text
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Milton Ota
Sent: Thursday, June 25, 2020 2:58 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer
Hi Richard,
I’m using JAWS Version Home Use Edition
Version 2020.2006.12 on a Dell computer with an i7 processor and the Windows May update.
Milton
I am using Jaws Home 2020, on a Del laptop running Windows 10 Home 64bit 2004 version.
I get nothing from the help button.
However, if I put Jaws into speak on command and launch narrator, I can read the version number.
Are you using either Jaws Pro, or Windows Pro?
I’m trying to sort out the difference.
Richard
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted
not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
Here are the steps I used to get the version number:
Open Team viewer, use control – Home to take the cursor to the top.
Tab to the Help Button, Press the spacebar to get the Context Menu.
Arrow up once and press Enter on About.
Using the JAWS Key – V when the program is opened did not seem to work.
HTH.
Milton
Milton,
How did you get the version number?
I tried with Jaws and got a big nothing.
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted
not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
On Jun 25, 2020, at 1:37 PM, Milton Ota <mota1252@...> wrote:
The latest version of Team Viewer is:
Version:15.7.6 Date: Jun 22 2020
Milton
Which version of TeamViewer are you using? I think the current version is 15x! I just want to be sure that this version is correct.
As far as I know I don't think that there are any jaws scripts for this version.
-----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer
Thanks, I’m sure this will help if I need to use it again. I am using the free version.
The combination of Skype and Teamviewer allowed him to direct me to what I needed to do.
But, Teamviewer could use some help and/or Jaws scripts.
Richard
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while
I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
Hi Richard,
When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field.
Tab to: “Password: and provide the password that is generated.
This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license.
Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking
for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect.
I hope this is helpful information.
Milton
I would like to know that as well.
Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.
I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.
At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.
But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.
Richard
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while
I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.
Richard,
Team Viewer and JAWS 2020 was accessible when used a few weeks ago.
Dan
I need to use Teamviewer to get help on a braille display from the company.
Are there scripts for the latest Teamviewer and Jaws 2020?
The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.
Any help would be appreciated.
Richard
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while
I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
|
|
|
Hi Richard, I’m using JAWS Version Home Use Edition Version 2020.2006.12 on a Dell computer with an i7 processor and the Windows May update. Milton
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner Sent: Thursday, June 25, 2020 4:34 PM To: main@jfw.groups.io Subject: Re: Teamviewer I am using Jaws Home 2020, on a Del laptop running Windows 10 Home 64bit 2004 version. I get nothing from the help button. However, if I put Jaws into speak on command and launch narrator, I can read the version number. Are you using either Jaws Pro, or Windows Pro? I’m trying to sort out the difference. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 2:20 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer Here are the steps I used to get the version number: Open Team viewer, use control – Home to take the cursor to the top. Tab to the Help Button, Press the spacebar to get the Context Menu. Arrow up once and press Enter on About. Using the JAWS Key – V when the program is opened did not seem to work. HTH. Milton Milton, How did you get the version number? I tried with Jaws and got a big nothing. "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert On Jun 25, 2020, at 1:37 PM, Milton Ota <mota1252@...> wrote:
The latest version of Team Viewer is: Version:15.7.6 Date: Jun 22 2020 Milton Which version of TeamViewer are you using? I think the current version is 15x! I just want to be sure that this version is correct. As far as I know I don't think that there are any jaws scripts for this version. -----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer
Thanks, I’m sure this will help if I need to use it again. I am using the free version. The combination of Skype and Teamviewer allowed him to direct me to what I needed to do. But, Teamviewer could use some help and/or Jaws scripts. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert Hi Richard, When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field. Tab to: “Password: and provide the password that is generated. This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license. Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect. I hope this is helpful information. Milton I would like to know that as well. Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information. I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection. At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way. But I would say that whatever the current version of Teamviewer is, it isn’t very accessible. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio. Richard, Team Viewer and JAWS 2020 was accessible when used a few weeks ago. Dan I need to use Teamviewer to get help on a braille display from the company. Are there scripts for the latest Teamviewer and Jaws 2020? The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015. Any help would be appreciated. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
|
|
|
I am using Jaws Home 2020, on a Del laptop running Windows 10 Home 64bit 2004 version.
I get nothing from the help button.
However, if I put Jaws into speak on command and launch narrator, I can read the version number.
Are you using either Jaws Pro, or Windows Pro?
I’m trying to sort out the difference.
Richard
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted
not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
toggle quoted messageShow quoted text
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of
Milton Ota
Sent: Thursday, June 25, 2020 2:20 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer
Here are the steps I used to get the version number:
Open Team viewer, use control – Home to take the cursor to the top.
Tab to the Help Button, Press the spacebar to get the Context Menu.
Arrow up once and press Enter on About.
Using the JAWS Key – V when the program is opened did not seem to work.
HTH.
Milton
Milton,
How did you get the version number?
I tried with Jaws and got a big nothing.
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted
not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
On Jun 25, 2020, at 1:37 PM, Milton Ota <mota1252@...> wrote:
The latest version of Team Viewer is:
Version:15.7.6 Date: Jun 22 2020
Milton
Which version of TeamViewer are you using? I think the current version is 15x! I just want to be sure that this version is correct.
As far as I know I don't think that there are any jaws scripts for this version.
-----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer
Thanks, I’m sure this will help if I need to use it again. I am using the free version.
The combination of Skype and Teamviewer allowed him to direct me to what I needed to do.
But, Teamviewer could use some help and/or Jaws scripts.
Richard
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while
I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
Hi Richard,
When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field.
Tab to: “Password: and provide the password that is generated.
This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license.
Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking
for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect.
I hope this is helpful information.
Milton
I would like to know that as well.
Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.
I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.
At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.
But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.
Richard
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while
I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.
Richard,
Team Viewer and JAWS 2020 was accessible when used a few weeks ago.
Dan
I need to use Teamviewer to get help on a braille display from the company.
Are there scripts for the latest Teamviewer and Jaws 2020?
The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.
Any help would be appreciated.
Richard
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while
I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
|
|
|
Here are the steps I used to get the version number: Open Team viewer, use control – Home to take the cursor to the top. Tab to the Help Button, Press the spacebar to get the Context Menu. Arrow up once and press Enter on About. Using the JAWS Key – V when the program is opened did not seem to work. HTH. Milton
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner Sent: Thursday, June 25, 2020 4:02 PM To: main@jfw.groups.io Subject: Re: Teamviewer Milton, How did you get the version number? I tried with Jaws and got a big nothing. "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
On Jun 25, 2020, at 1:37 PM, Milton Ota <mota1252@...> wrote:
The latest version of Team Viewer is: Version:15.7.6 Date: Jun 22 2020 Milton From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Ingram
Sent: Thursday, June 25, 2020 3:18 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer Which version of TeamViewer are you using? I think the current version is 15x! I just want to be sure that this version is correct. As far as I know I don't think that there are any jaws scripts for this version. -----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer
Thanks, I’m sure this will help if I need to use it again. I am using the free version. The combination of Skype and Teamviewer allowed him to direct me to what I needed to do. But, Teamviewer could use some help and/or Jaws scripts. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 8:42 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer Hi Richard, When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field. Tab to: “Password: and provide the password that is generated. This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license. Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect. I hope this is helpful information. Milton I would like to know that as well. Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information. I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection. At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way. But I would say that whatever the current version of Teamviewer is, it isn’t very accessible. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio. Richard, Team Viewer and JAWS 2020 was accessible when used a few weeks ago. Dan I need to use Teamviewer to get help on a braille display from the company. Are there scripts for the latest Teamviewer and Jaws 2020? The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015. Any help would be appreciated. Richard "He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert
|
|
|
moderated
Re: fs Cast and Q-cast.
Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also.
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith Sent: Thursday, June 25, 2020 3:58 PM To: main@jfw.groups.io Subject: Re: fs Cast and Q-cast. This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search. You would certainly find no difficulty locating FSCast from a number of sources in the program. There is an optional ` ` additional app called VI Podcast which you can download from within the app This supports the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps use different databases for accessing Podcasts. FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app. You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful. However in the audio demonstration I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected.
Honostly, I think you should look for another podcast player. I don’t think QCast is being developed anymore. Sent from Mail for Windows 10 Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.
|
|
|
