Date   

moderated Problem with Internet email in outlook

Brenda Emerson-Alford
 

I am using jaws 2019 on windows 1903. I have Microsoft 2016. I am having a problem with Outlook receiving my Gmail. It had been working before I traveled. Even though I took my hotspot with me for Wi-Fi connection I was on able to originally get my email through outlook on my laptop. Eventually I was able to make it work through Gmail by responding to a critical alert and letting them know it was me. Now that I am back I cannot get my email to come through on Outlook. I continually receive a prompt to enter my password for my Gmail account. It is properly entered. I hit OK and I get the same message over and over again. I did go into Gmail and set up second verification using a text message. I’m not sure if that is interfering with things now or not. I had the problem before I set up the second verification process. I would love to hear any thoughts on what to do. Thanks.


On Feb 29, 2020, at 5:20 PM, Jessica D <jldail13@...> wrote:

Hi,

I had to reset my computer today.

After the reset, I noticed that the mobile versions of the office apps, except Outlook were installed.

Outlook wasn’t there, so I figured I’d give the win10 mail app another shot.

 

I’ve used it before, but its been at least a year, since I tried it last.

 

Its working well, but I can’t figure out how to change the order of accounts, or if that’s even possible?

 

Thanks,

 

Jessica

 

Sent from Mail for Windows 10

 


moderated Re: : Com Pilot instructions

Glenn / Lenny
 

Hi Addison,
I often experience this graphic issue with technology manuals, like HAM
radios and the like.
They show pictures of the buttons, so stating that this graphic image does
such and such means nothing to us.
To make things worse, manufacturers don't want to use English, so they label
their controls with hieroglyphics and that way nobody knows what the label
on the device means.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Monday, March 02, 2020 1:12 PM
Subject: Re: : Com Pilot instructions


Hi Mario,David mGlenn and other
Well I email Sherry from FS this morning and she ask me to send her the
email again because she have a idea and will send me the email for copilot
instruction manual so she did it.
Okay, Addison. I’ve done OCR and pasted the contents into a word document
which I have attached. However, there are a lot of unlabeled graphics and
there won’t be much jaws can do about that. The people who created the
manual needed to add labels to the graphics so a screen reader can tell what
they are.

So I able to read the copilot instruction that Sherry paste in document .
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Saturday, February 29, 2020 10:35 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

this tells me that there was a message being displayed. what does the
message say? press insert+b to repeat the message.

what information are you trying to get from this file? a DBF is not an
image nor is it a document.

I just realized something... is the file you're trying to OCR a PDF?
Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 8:25 PM
Subject: : Com Pilot instructions
OK Mario !! When I went back open the dbf file in attachment I press
alt + p for print then the dialogue box open so I arrow up once intefro
printer then press enter then I wait so it was scan into openbook then
it was downloaded then jaws say please wait then a message came up to
say call freedom scientific something ok button


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 5:15 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

if it does print something, it will be at the least gibberish because it
is not an image of text or is a document.
.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in
here,I was wondered if it's possible for me to try to used printer info
to scan with openbooks !! Do you think that might works? I'm going to
try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format
which holds tectual information. it isn't graphical nore is it a
document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction
Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's
OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is
dbf file when I press enter on the attachment then I press insert +
spacebar then letter o for OCR then I press letter d for document
then I waited jaws not reading anything yet !! What am I doing wrong in
here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may contain information that is privileged and or confidential and is
intended only for the individual or entity to which it is addressed. If
you are not the intended recipient, or agent responsible for delivering
this communication, you are hereby notified that any dissemination,
distribution, copying or disclosure of this communication is strictly
prohibited. If you have received this transmission in error, please
notify the sender immediately, and delete the original communication and
any attachment from any computer, server or other electronic recording
or storage device. Receipt by anyone other than the intended recipient
is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me that I receive from you today (Thursday) ? Also please tell me what
you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.









.








.


moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Hi Mario,David mGlenn and other
Well I email Sherry from FS this morning and she ask me to send her the email again because she have a idea and will send me the email for copilot instruction manual so she did it.
Okay, Addison. I’ve done OCR and pasted the contents into a word document which I have attached. However, there are a lot of unlabeled graphics and there won’t be much jaws can do about that. The people who created the manual needed to add labels to the graphics so a screen reader can tell what they are.

So I able to read the copilot instruction that Sherry paste in document .
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Saturday, February 29, 2020 10:35 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

this tells me that there was a message being displayed. what does the
message say? press insert+b to repeat the message.

what information are you trying to get from this file? a DBF is not an
image nor is it a document.

I just realized something... is the file you're trying to OCR a PDF?
Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 8:25 PM
Subject: : Com Pilot instructions
OK Mario !! When I went back open the dbf file in attachment I press
alt + p for print then the dialogue box open so I arrow up once intefro
printer then press enter then I wait so it was scan into openbook then
it was downloaded then jaws say please wait then a message came up to
say call freedom scientific something ok button


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 5:15 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

if it does print something, it will be at the least gibberish because it
is not an image of text or is a document.
.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in
here,I was wondered if it's possible for me to try to used printer info
to scan with openbooks !! Do you think that might works? I'm going to
try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format
which holds tectual information. it isn't graphical nore is it a
document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction
Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's
OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is
dbf file when I press enter on the attachment then I press insert +
spacebar then letter o for OCR then I press letter d for document
then I waited jaws not reading anything yet !! What am I doing wrong in
here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may contain information that is privileged and or confidential and is
intended only for the individual or entity to which it is addressed. If
you are not the intended recipient, or agent responsible for delivering
this communication, you are hereby notified that any dissemination,
distribution, copying or disclosure of this communication is strictly
prohibited. If you have received this transmission in error, please
notify the sender immediately, and delete the original communication and
any attachment from any computer, server or other electronic recording
or storage device. Receipt by anyone other than the intended recipient
is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me that I receive from you today (Thursday) ? Also please tell me what
you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.









.








.


moderated Re: : Com Pilot instructions

O.Addison Gethers
 

I will response back to Mario or Glenn !! Thanks for explaining to me Sieghard

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel
Sent: Monday, March 02, 2020 12:16 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

It is "PDF" as in papa delta foxtrot.
You really need to be careful and precise with such things because your initial message said "DBF" as in Delta Bravo Foxtrot and that stands for "database file" and it's like having a discussion about cars and somebody joins in and talks about airplanes.
This is why so many messages gave you the advice to use a database program to open the file and all that.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Monday, March 2, 2020 6:37 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Sieghard yeah I mean pbf file not dbf file


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel
Sent: Monday, March 02, 2020 1:00 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

So I think you are referring to "PDF" files and not "DBF" files.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Sunday, March 1, 2020 5:33 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Mario Here what the message say on openbook

An unknown error has occurred during processing. Please close and restart OpenBook. If the error persists, please contact Freedom Scientific Technical Support.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Saturday, February 29, 2020 10:35 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

this tells me that there was a message being displayed. what does the message say? press insert+b to repeat the message.

what information are you trying to get from this file? a DBF is not an image nor is it a document.

I just realized something... is the file you're trying to OCR a PDF?
Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 8:25 PM
Subject: : Com Pilot instructions
OK Mario !! When I went back open the dbf file in attachment I press alt + p for print then the dialogue box open so I arrow up once intefro printer then press enter then I wait so it was scan into openbook then it was downloaded then jaws say please wait then a message came up to say call freedom scientific something ok button


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 5:15 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

if it does print something, it will be at the least gibberish because it is not an image of text or is a document.
.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in here,I was wondered if it's possible for me to try to used printer info to scan with openbooks !! Do you think that might works? I'm going to try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which holds tectual information. it isn't graphical nore is it a document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom scientific technical support she ask me if I try with OCR then she give me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf file when I press enter on the attachment then I press insert + spacebar then letter o for OCR then I press letter d for document then I waited jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may contain information that is privileged and or confidential and is intended only for the individual or entity to which it is addressed. If you are not the intended recipient, or agent responsible for delivering this communication, you are hereby notified that any dissemination, distribution, copying or disclosure of this communication is strictly prohibited. If you have received this transmission in error, please notify the sender immediately, and delete the original communication and any attachment from any computer, server or other electronic recording or storage device. Receipt by anyone other than the intended recipient is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me that I receive from you today (Thursday) ? Also please tell me what you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and minimum the volume ?

Addison









.









.








.


moderated Re: How to get the URL of a streaming radio?

David Griffith
 

This is easy.

On the victor Reader device go into the online settings menu and export  your Internet Radio playlists to file.

This will create a playlist file on your SD card which you can then use on a PC.

This file will incidentally will play just as it is with VLC with N and P shortcut keypresses navigating between next and previous stations in the playlist.

However if you want the individual stream URL addresses you need to open this file with Notepad – it should be fairly easy then to navigate down and find both the Station you are interested in and the Stream URL relating to that stream.

 

Copy the  stream URL out of this file to create an m3u file etc.

This works fine in the vast majority of cases.

 

Very occasionally this will not work for geographically restricted streams like the UK 5 Live Sports Extra. I don’t know why this is the case. However as an workaround you could do one of the following in case of this difficult type of stream.

  1. As I say the whole playlist file will play in VLC and you can navigate  to the required  station like 5 live sports extra and simply play it from there.
  2. Alternatively create a special  1 station favourites list on your Stream and save just the difficult station  into your Favourites and export this to your PC.
  3. Of course before doing this you will need to save your existing Favourites to SD card, then rename this favourites playlist to something like say Old Favourites and you can then re-import this playlist into your Stream as a new playlist, leaving an existing empty Favourites playlist for you to add stations to.
  4. In this way you can create as many radio playlists as you like on the Stream/Trek by constantly exporting the Favourites playlist and renaming it before re-importing it back to the Stream under the new name.

David Griffith

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of james hooper
Sent: 02 March 2020 16:04
To: main@jfw.groups.io
Subject: Re: How to get the URL of a streaming radio?

 

Kind of an offshoot if say one has a stream on their vic and they want the urhl how can  this be accomplished.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Monday, March 02, 2020 8:53 AM
To: main@jfw.groups.io
Subject: Re: How to get the URL of a streaming radio?

 

There are several methods of varying complexity including  looking at Page source code but before trying any of that I would suggest installing Tapin Radio on your PC.

 

Just using Tapin might meet your needs but you can also use it to get station URLs.

  1. Search for the station you require in Tapin.
  2. Test that the station works by starting it playing. Once you know it actually works tab to the stop button and then back to the station name.
  3. Bring up the context menu with the application key and select properties. Jaws should start reading out the properties  automatically but in the event it does not you can then use jaws plus B  to force a read of the dialogue.
  4. Use jaws plus space followed by H to bring up speech history.
  5. Reviewing the speech history you can then find a line which says stream URL and from this line you can copy and paste this URL to create a m3u file or whatever you want to do with it.

Note the Plextalk is getting long in the tooth now and does not support all modern streams. So you might well find a stream which works in Tapin WinAmp or more likely VLC but not on the Plextalk. WinAmp supports most streams also but not as much, in my experience, as a more recent version of VLC does.

 

David Griffith

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Peter Tesar
Sent: 02 March 2020 15:40
To: main@jfw.groups.io
Subject: How to get the URL of a streaming radio?

 

Hello,


 

Is there a way to get the URL from some of my local radio stations so that I can put them into a playlist file?

 

I found a BBC web site listing the full URL addresses for many local and short wave stations.

I can put each URL in a separate .m3u file and with its shortcut on the desktop, WinAmp starts streaming the station. Using these m3u files, my PlexTalk Linio can also stream the radio station.

 

However I need the full URL address.

 

From a station’s web site, I can select “listen live” and this brings up Radio Player controls.

The station plays through a radio player. the URL starts with:

   http://player...

This is not the real URL.

 

On the web page, the Player controls include:    play and mute.

Also there are buttons for:

   add this station to my Stations

or if I did select “add”

   Remove this station  from my Stations.

 

This implies that there is a Stations list.

Is it possible to open it and get the full URL?

 

If not, is there another way?

 

I’ve heard of programs allowing one to store radio stations for ease of use.

Could they have the stored URL list so one can view it and cut and paste?

 

Any advice will be welcom, thanks,

 

Peter T.


moderated Re: : Com Pilot instructions

 

It is "PDF" as in papa delta foxtrot.
You really need to be careful and precise with such things because your initial message said "DBF" as in Delta Bravo Foxtrot and that stands for "database file" and it's like having a discussion about cars and somebody joins in and talks about airplanes.
This is why so many messages gave you the advice to use a database program to open the file and all that.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Monday, March 2, 2020 6:37 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Sieghard yeah I mean pbf file not dbf file


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel
Sent: Monday, March 02, 2020 1:00 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

So I think you are referring to "PDF" files and not "DBF" files.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Sunday, March 1, 2020 5:33 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Mario Here what the message say on openbook

An unknown error has occurred during processing. Please close and restart OpenBook. If the error persists, please contact Freedom Scientific Technical Support.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Saturday, February 29, 2020 10:35 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

this tells me that there was a message being displayed. what does the message say? press insert+b to repeat the message.

what information are you trying to get from this file? a DBF is not an image nor is it a document.

I just realized something... is the file you're trying to OCR a PDF?
Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 8:25 PM
Subject: : Com Pilot instructions
OK Mario !! When I went back open the dbf file in attachment I press alt + p for print then the dialogue box open so I arrow up once intefro printer then press enter then I wait so it was scan into openbook then it was downloaded then jaws say please wait then a message came up to say call freedom scientific something ok button


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 5:15 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

if it does print something, it will be at the least gibberish because it is not an image of text or is a document.
.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in here,I was wondered if it's possible for me to try to used printer info to scan with openbooks !! Do you think that might works? I'm going to try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which holds tectual information. it isn't graphical nore is it a document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom scientific technical support she ask me if I try with OCR then she give me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf file when I press enter on the attachment then I press insert + spacebar then letter o for OCR then I press letter d for document then I waited jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may contain information that is privileged and or confidential and is intended only for the individual or entity to which it is addressed. If you are not the intended recipient, or agent responsible for delivering this communication, you are hereby notified that any dissemination, distribution, copying or disclosure of this communication is strictly prohibited. If you have received this transmission in error, please notify the sender immediately, and delete the original communication and any attachment from any computer, server or other electronic recording or storage device. Receipt by anyone other than the intended recipient is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me that I receive from you today (Thursday) ? Also please tell me what you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and minimum the volume ?

Addison









.









.








.


moderated Re: How to get the URL of a streaming radio?

james hooper
 

Kind of an offshoot if say one has a stream on their vic and they want the urhl how can  this be accomplished.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Monday, March 02, 2020 8:53 AM
To: main@jfw.groups.io
Subject: Re: How to get the URL of a streaming radio?

 

There are several methods of varying complexity including  looking at Page source code but before trying any of that I would suggest installing Tapin Radio on your PC.

 

Just using Tapin might meet your needs but you can also use it to get station URLs.

  1. Search for the station you require in Tapin.
  2. Test that the station works by starting it playing. Once you know it actually works tab to the stop button and then back to the station name.
  3. Bring up the context menu with the application key and select properties. Jaws should start reading out the properties  automatically but in the event it does not you can then use jaws plus B  to force a read of the dialogue.
  4. Use jaws plus space followed by H to bring up speech history.
  5. Reviewing the speech history you can then find a line which says stream URL and from this line you can copy and paste this URL to create a m3u file or whatever you want to do with it.

Note the Plextalk is getting long in the tooth now and does not support all modern streams. So you might well find a stream which works in Tapin WinAmp or more likely VLC but not on the Plextalk. WinAmp supports most streams also but not as much, in my experience, as a more recent version of VLC does.

 

David Griffith

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Peter Tesar
Sent: 02 March 2020 15:40
To: main@jfw.groups.io
Subject: How to get the URL of a streaming radio?

 

Hello,


 

Is there a way to get the URL from some of my local radio stations so that I can put them into a playlist file?

 

I found a BBC web site listing the full URL addresses for many local and short wave stations.

I can put each URL in a separate .m3u file and with its shortcut on the desktop, WinAmp starts streaming the station. Using these m3u files, my PlexTalk Linio can also stream the radio station.

 

However I need the full URL address.

 

From a station’s web site, I can select “listen live” and this brings up Radio Player controls.

The station plays through a radio player. the URL starts with:

   http://player...

This is not the real URL.

 

On the web page, the Player controls include:    play and mute.

Also there are buttons for:

   add this station to my Stations

or if I did select “add”

   Remove this station  from my Stations.

 

This implies that there is a Stations list.

Is it possible to open it and get the full URL?

 

If not, is there another way?

 

I’ve heard of programs allowing one to store radio stations for ease of use.

Could they have the stored URL list so one can view it and cut and paste?

 

Any advice will be welcom, thanks,

 

Peter T.


moderated Re: How to get the URL of a streaming radio?

David Griffith
 

There are several methods of varying complexity including  looking at Page source code but before trying any of that I would suggest installing Tapin Radio on your PC.

 

Just using Tapin might meet your needs but you can also use it to get station URLs.

  1. Search for the station you require in Tapin.
  2. Test that the station works by starting it playing. Once you know it actually works tab to the stop button and then back to the station name.
  3. Bring up the context menu with the application key and select properties. Jaws should start reading out the properties  automatically but in the event it does not you can then use jaws plus B  to force a read of the dialogue.
  4. Use jaws plus space followed by H to bring up speech history.
  5. Reviewing the speech history you can then find a line which says stream URL and from this line you can copy and paste this URL to create a m3u file or whatever you want to do with it.

Note the Plextalk is getting long in the tooth now and does not support all modern streams. So you might well find a stream which works in Tapin WinAmp or more likely VLC but not on the Plextalk. WinAmp supports most streams also but not as much, in my experience, as a more recent version of VLC does.

 

David Griffith

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Peter Tesar
Sent: 02 March 2020 15:40
To: main@jfw.groups.io
Subject: How to get the URL of a streaming radio?

 

Hello,


 

Is there a way to get the URL from some of my local radio stations so that I can put them into a playlist file?

 

I found a BBC web site listing the full URL addresses for many local and short wave stations.

I can put each URL in a separate .m3u file and with its shortcut on the desktop, WinAmp starts streaming the station. Using these m3u files, my PlexTalk Linio can also stream the radio station.

 

However I need the full URL address.

 

From a station’s web site, I can select “listen live” and this brings up Radio Player controls.

The station plays through a radio player. the URL starts with:

   http://player...

This is not the real URL.

 

On the web page, the Player controls include:    play and mute.

Also there are buttons for:

   add this station to my Stations

or if I did select “add”

   Remove this station  from my Stations.

 

This implies that there is a Stations list.

Is it possible to open it and get the full URL?

 

If not, is there another way?

 

I’ve heard of programs allowing one to store radio stations for ease of use.

Could they have the stored URL list so one can view it and cut and paste?

 

Any advice will be welcom, thanks,

 

Peter T.


moderated How to get the URL of a streaming radio?

Peter Tesar
 

Hello,


 

Is there a way to get the URL from some of my local radio stations so that I can put them into a playlist file?

 

I found a BBC web site listing the full URL addresses for many local and short wave stations.

I can put each URL in a separate .m3u file and with its shortcut on the desktop, WinAmp starts streaming the station. Using these m3u files, my PlexTalk Linio can also stream the radio station.

 

However I need the full URL address.

 

From a station’s web site, I can select “listen live” and this brings up Radio Player controls.

The station plays through a radio player. the URL starts with:

   http://player...

This is not the real URL.

 

On the web page, the Player controls include:    play and mute.

Also there are buttons for:

   add this station to my Stations

or if I did select “add”

   Remove this station  from my Stations.

 

This implies that there is a Stations list.

Is it possible to open it and get the full URL?

 

If not, is there another way?

 

I’ve heard of programs allowing one to store radio stations for ease of use.

Could they have the stored URL list so one can view it and cut and paste?

 

Any advice will be welcom, thanks,

 

Peter T.


moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Sieghard yeah I mean pbf file not dbf file

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel
Sent: Monday, March 02, 2020 1:00 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

So I think you are referring to "PDF" files and not "DBF" files.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Sunday, March 1, 2020 5:33 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Mario Here what the message say on openbook

An unknown error has occurred during processing. Please close and restart OpenBook. If the error persists, please contact Freedom Scientific Technical Support.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Saturday, February 29, 2020 10:35 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

this tells me that there was a message being displayed. what does the message say? press insert+b to repeat the message.

what information are you trying to get from this file? a DBF is not an image nor is it a document.

I just realized something... is the file you're trying to OCR a PDF?
Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 8:25 PM
Subject: : Com Pilot instructions
OK Mario !! When I went back open the dbf file in attachment I press alt + p for print then the dialogue box open so I arrow up once intefro printer then press enter then I wait so it was scan into openbook then it was downloaded then jaws say please wait then a message came up to say call freedom scientific something ok button


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 5:15 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

if it does print something, it will be at the least gibberish because it is not an image of text or is a document.
.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in here,I was wondered if it's possible for me to try to used printer info to scan with openbooks !! Do you think that might works? I'm going to try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which holds tectual information. it isn't graphical nore is it a document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom scientific technical support she ask me if I try with OCR then she give me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf file when I press enter on the attachment then I press insert + spacebar then letter o for OCR then I press letter d for document then I waited jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may contain information that is privileged and or confidential and is intended only for the individual or entity to which it is addressed. If you are not the intended recipient, or agent responsible for delivering this communication, you are hereby notified that any dissemination, distribution, copying or disclosure of this communication is strictly prohibited. If you have received this transmission in error, please notify the sender immediately, and delete the original communication and any attachment from any computer, server or other electronic recording or storage device. Receipt by anyone other than the intended recipient is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me that I receive from you today (Thursday) ? Also please tell me what you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and minimum the volume ?

Addison









.









.








.


moderated Re: : Com Pilot instructions

 

So I think you are referring to "PDF" files and not "DBF" files.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Sunday, March 1, 2020 5:33 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Mario Here what the message say on openbook

An unknown error has occurred during processing. Please close and restart OpenBook. If the error persists, please contact Freedom Scientific Technical Support.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Saturday, February 29, 2020 10:35 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

this tells me that there was a message being displayed. what does the message say? press insert+b to repeat the message.

what information are you trying to get from this file? a DBF is not an image nor is it a document.

I just realized something... is the file you're trying to OCR a PDF?
Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 8:25 PM
Subject: : Com Pilot instructions
OK Mario !! When I went back open the dbf file in attachment I press alt + p for print then the dialogue box open so I arrow up once intefro printer then press enter then I wait so it was scan into openbook then it was downloaded then jaws say please wait then a message came up to say call freedom scientific something ok button


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 5:15 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

if it does print something, it will be at the least gibberish because it is not an image of text or is a document.
.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in here,I was wondered if it's possible for me to try to used printer info to scan with openbooks !! Do you think that might works? I'm going to try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which holds tectual information. it isn't graphical nore is it a document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom scientific technical support she ask me if I try with OCR then she give me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf file when I press enter on the attachment then I press insert + spacebar then letter o for OCR then I press letter d for document then I waited jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may contain information that is privileged and or confidential and is intended only for the individual or entity to which it is addressed. If you are not the intended recipient, or agent responsible for delivering this communication, you are hereby notified that any dissemination, distribution, copying or disclosure of this communication is strictly prohibited. If you have received this transmission in error, please notify the sender immediately, and delete the original communication and any attachment from any computer, server or other electronic recording or storage device. Receipt by anyone other than the intended recipient is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me that I receive from you today (Thursday) ? Also please tell me what you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and minimum the volume ?

Addison









.









.








.


moderated Re: facebook messenger issue with chrome/IE and jaws

 

Make sure your browser Window is maximized.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Sunday, March 1, 2020 10:09 AM
To: main@jfw.groups.io
Subject: Re: facebook messenger issue with chrome/IE and jaws

Have you tried replacing the WWW with mbasic in the address field?

----- Original Message -----
From: "James English" <james13english@...>
To: <main@jfw.groups.io>
Sent: Sunday, March 01, 2020 8:05 AM
Subject: facebook messenger issue with chrome/IE and jaws


Hello,

Previously, both chrome and IE were displaying facebook messenger
pages absolutely fine with jaws. However recently, when I log in, I
don't see what would be considered the top half of the screen (the
search box, the settings menu etc), and jaws doesn't read out the
names of the people in my recent messages list.
Does anybody have an idea why this would be/how I can fix it?

- James



moderated Re: using excel mobile with jaws 2020?

 

Also, reporting such things to the Vice President of Software Product Management  at Vispero is probably not the best approach, I doubt Eric has the time to deal with everybody’s little issues, imagine if all Jaws users would send their questions to him, he’d get 10,000 emails a day.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Sunday, March 1, 2020 8:45 AM
To: Jaws user list <main@jfw.groups.io>
Subject: using excel mobile with jaws 2020?

 

Hi,

I

 

Sent from Mail for Windows 10

Was using excel with jaws2020 earlier, and noticed that jaws says, “a”1”, and will not read the cell content.

As a workaround, I’m having to use Narrator.

Is this expected behavior from jaws?

 

How do I report this to FS?

I may email Erik.

 

Thanks,

 

Jessica

 


moderated Re: using excel mobile with jaws 2020?

 

I have no issues with Jaws not reading what’s in cells, but why are you using Excel Mobile and not the desktop version?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Sunday, March 1, 2020 8:45 AM
To: Jaws user list <main@jfw.groups.io>
Subject: using excel mobile with jaws 2020?

 

Hi,

I

 

Sent from Mail for Windows 10

Was using excel with jaws2020 earlier, and noticed that jaws says, “a”1”, and will not read the cell content.

As a workaround, I’m having to use Narrator.

Is this expected behavior from jaws?

 

How do I report this to FS?

I may email Erik.

 

Thanks,

 

Jessica

 


moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Hi Glenn When I restart the computer this afternoon when the windows screen open it's say adobe reader's update so I install the adobe reader's so I went back on the document the adobe readers opens so it's read like this below
029-0308-03_ComPilot_II_User_Guide_V1 00 (3).pdf
3
Phonak ComPilot
II
User Guide
17
18

Phonak ComPilot II
User Guide

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn / Lenny
Sent: Saturday, February 29, 2020 2:33 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Adobe is a good thing to keep.
Once you get one of the offices installed,, hopefully that file type will no
longer be associated with Adobe, but if it is, you may have to go into "open
with..." and select the calc program with the office program you have
installed.
Maybe the office program you install will do this during the install.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Saturday, February 29, 2020 1:13 PM
Subject: Re: : Com Pilot instructions


Hi Glenn Thanks for the links and will download it. Can I still keep adobe
reader or get rid off adobe reader?


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Saturday, February 29, 2020 11:49 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Addison,
You can get Open Office at:
http://www.openoffice.org/
And Libra Office at:
https://www.libreoffice.org/
I used to use Open Office, and switched to Libra Office.
If one doesn't suite your taste, you can use the other.
HTH.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Saturday, February 29, 2020 7:14 AM
Subject: Re: : Com Pilot instructions


Glenn then what other suggestion I have ?
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 9:36 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I'm not sure if Adobe will read data base files. But if it does, I'd
suggest that it's not the best choice for accessing such files.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 8:31 PM
Subject: Re: : Com Pilot instructions


Hi Glenn Well I opens the document then wait for 1 or 2 minute adobe
reader didn't appear on there where I would hear it's say adobe reader left
to right something so I can press enter on it


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 8:43 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Addison,
That sounds like it would be best for PDF files, not the type you want to
access.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 7:31 PM
Subject: Re: : Com Pilot instructions


Glenn I do have adobe reader


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.


moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Hi Mario Here what the message say on openbook

An unknown error has occurred during processing. Please close and restart OpenBook. If the error persists, please contact Freedom Scientific Technical Support.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Saturday, February 29, 2020 10:35 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

this tells me that there was a message being displayed. what does the
message say? press insert+b to repeat the message.

what information are you trying to get from this file? a DBF is not an
image nor is it a document.

I just realized something... is the file you're trying to OCR a PDF?
Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 8:25 PM
Subject: : Com Pilot instructions
OK Mario !! When I went back open the dbf file in attachment I press
alt + p for print then the dialogue box open so I arrow up once intefro
printer then press enter then I wait so it was scan into openbook then
it was downloaded then jaws say please wait then a message came up to
say call freedom scientific something ok button


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 5:15 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

if it does print something, it will be at the least gibberish because it
is not an image of text or is a document.
.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in
here,I was wondered if it's possible for me to try to used printer info
to scan with openbooks !! Do you think that might works? I'm going to
try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format
which holds tectual information. it isn't graphical nore is it a
document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction
Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's
OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is
dbf file when I press enter on the attachment then I press insert +
spacebar then letter o for OCR then I press letter d for document
then I waited jaws not reading anything yet !! What am I doing wrong in
here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may contain information that is privileged and or confidential and is
intended only for the individual or entity to which it is addressed. If
you are not the intended recipient, or agent responsible for delivering
this communication, you are hereby notified that any dissemination,
distribution, copying or disclosure of this communication is strictly
prohibited. If you have received this transmission in error, please
notify the sender immediately, and delete the original communication and
any attachment from any computer, server or other electronic recording
or storage device. Receipt by anyone other than the intended recipient
is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me that I receive from you today (Thursday) ? Also please tell me what
you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.









.








.


moderated Re: facebook messenger issue with chrome/IE and jaws

James English
 

Hi,

Unfortunately that had no effect.

- James

On 3/1/20, Glenn / Lenny <glennervin@...> wrote:
Have you tried replacing the WWW with mbasic in the address field?

----- Original Message -----
From: "James English" <james13english@...>
To: <main@jfw.groups.io>
Sent: Sunday, March 01, 2020 8:05 AM
Subject: facebook messenger issue with chrome/IE and jaws


Hello,

Previously, both chrome and IE were displaying facebook messenger
pages absolutely fine with jaws. However recently, when I log in, I
don't see what would be considered the top half of the screen (the
search box, the settings menu etc), and jaws doesn't read out the
names of the people in my recent messages list.
Does anybody have an idea why this would be/how I can fix it?

- James






moderated Re: facebook messenger issue with chrome/IE and jaws

Glenn / Lenny
 

Have you tried replacing the WWW with mbasic in the address field?

----- Original Message -----
From: "James English" <james13english@...>
To: <main@jfw.groups.io>
Sent: Sunday, March 01, 2020 8:05 AM
Subject: facebook messenger issue with chrome/IE and jaws


Hello,

Previously, both chrome and IE were displaying facebook messenger
pages absolutely fine with jaws. However recently, when I log in, I
don't see what would be considered the top half of the screen (the
search box, the settings menu etc), and jaws doesn't read out the
names of the people in my recent messages list.
Does anybody have an idea why this would be/how I can fix it?

- James


moderated Re: does jfw work very well with firefox?

Glenn / Lenny
 


Hank,
Maybe someone has already answered this, but you are already connected to the Internet when you boot up the computer, so you don't need to enter any of that into your browser.
Glenn

----- Original Message -----
Sent: Sunday, March 01, 2020 7:22 AM
Subject: Re: does jfw work very well with firefox?

 
Hello back Dave and everyone,
 
First of all, thanks very much for all your very helpful replys to my firefox questions. So I don’t need to create an account in firefox when I first start using it after I get a newer version of Jaws to be able to successfully use it?
 
I am also wondering once I have installed firefox, what are the menu steps I need to do to enter my internet provider user id and password info so I can successfully access the internet when I start firefox each time to do things on the internet? Thanks very much in advance for any help I can maybe get with this.
 
 
 
 
 
 
 
Warmest regards,
All the best,
 
Jaws18 user  
Hank
 
 
From: Dave Durber
Sent: Sunday, March 1, 2020 7:40 AM
To: main@jfw.groups.io
Subject: Re: does jfw work very well with firefox?
 
Hello Hank and everyone:
 
I have been using Water Fox for several months. One of the main reasons I like it, is that you do not need to have an account, in order to use it, in that way, it is like using Internet Explorer.
 
HTH
 
Dave Durber
 
----- Original Message -----
From: Hank William Merchant
To: main@jfw.groups.io
Sent: Friday, February 28, 2020 11:39 PM
Subject: Re: does jfw work very well with firefox?
 
   
Hello Glen,
 
Thanks for your email reply. What version are you using of Jaws with firefox?I have heard that when you are first setting up firefox that you need to first create a account in firefox and that each time after that when you go on the internet with your setup firefox that you need to sign into your firefox account to be able to do anything you want to do on the internet using your setup firefox browser. Can you maybe please tell me if this is the case that you first need to create a acount in firefox and then need to sign into this firefox account each time you open firefox to be able to successfully do anything on the internet? Any help that maybe you can give me on this would be very much appreciated. Much thanks in advance for any help with this.
 
 
 
 
 
 
All the best,
 
Jaws18 user Hank
 
 
From: Glenn / Lenny
Sent: Friday, February 28, 2020 2:43 PM
To: main@jfw.groups.io
Subject: Re: does jfw work very well with firefox?
 
Works fine.
 
----- Original Message -----
From: Hank William Merchant
To: main@jfw.groups.io
Sent: Thursday, February 27, 2020 6:34 PM
Subject: does jfw work very well with firefox?
 
 
Hello,
 
I am still using Jfw 18, can someone maybe please let me know if jfw works very well or maybe not with firefox? Do I maybe need to install jfw scripts before I am able to use jfw with firefox? Thanks in advance for any help I can get with this.
 
 
 
 
 
 
 
All the best,
 
Hank
 
 
 
 


moderated Re: : Com Pilot instructions

Glenn / Lenny
 

Hi Dave,
I cannot comment on NVDA, although I use NVDA, it isn't my primary
screenreader.
Both work well with Jaws, someone recently reported something odd with Libra
and Jaws, but I don't recall the issue.
Glenn

----- Original Message -----
From: "Dave Durber" <d.durber@...>
To: <main@jfw.groups.io>
Sent: Sunday, March 01, 2020 5:52 AM
Subject: Re: : Com Pilot instructions


Hello Glen:

How accessible are these two office programs with JAWS or NVDA?

Dave durber

----- Original Message -----
From: "Glenn / Lenny" <glennervin@...>
To: <main@jfw.groups.io>
Sent: Saturday, February 29, 2020 4:49 PM
Subject: Re: : Com Pilot instructions


Hi Addison,
You can get Open Office at:
http://www.openoffice.org/
And Libra Office at:
https://www.libreoffice.org/
I used to use Open Office, and switched to Libra Office.
If one doesn't suite your taste, you can use the other.
HTH.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Saturday, February 29, 2020 7:14 AM
Subject: Re: : Com Pilot instructions


Glenn then what other suggestion I have ?
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 9:36 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I'm not sure if Adobe will read data base files. But if it does, I'd
suggest that it's not the best choice for accessing such files.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 8:31 PM
Subject: Re: : Com Pilot instructions


Hi Glenn Well I opens the document then wait for 1 or 2 minute adobe
reader didn't appear on there where I would hear it's say adobe reader
left
to right something so I can press enter on it


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 8:43 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Addison,
That sounds like it would be best for PDF files, not the type you want to
access.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 7:31 PM
Subject: Re: : Com Pilot instructions


Glenn I do have adobe reader


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within
the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format
which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it
to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination,
distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.