Date   

moderated Re: Looking for text with Bold or Italics

Ann Byrne
 

Check out the skim reading tool. I think it will do it.

At 11:12 PM 12/2/2020, you wrote:
hi all,


a friend of mine is having a hard time trying to look through text with bold, italics and a specific colour.

She's using Office 2013 and JAWS 2020.

I thought that using CONTROL+f, going to advanced, and selecting "format, character" then the desired attributes would work, but for some reason it only works if she invokes the dialogue over and over. At that point, JAWS won't report the next occurrence with the selected formatting. Is there a way to jump from attributed text to attributed text without having to constantly go to the dialogue and select next each time?

Also, it would be helpful if JAWS reported the next occurrence. I thought that pressing F3 might do the trick, but for some reason it does not work.

If we use the attributes scheme, that does not help much, since she does not need to read the whole text.

It's for a proofreading job in Braille, where the text is present as a hardcopy and needs to be compared against the digital version. The original book has some highlighting that needs to match once the Braille version has been proofread.


Any help would be appreciated.


Regards,

Nermin





moderated Looking for text with Bold or Italics

Nermin
 

hi all,


a friend of mine is having a hard time trying to look through text with bold, italics and a specific colour.

She's using Office 2013 and JAWS 2020.

I thought that using CONTROL+f, going to advanced, and selecting "format, character" then the desired attributes would work, but for some reason it only works if she invokes the dialogue over and over. At that point, JAWS won't report the next occurrence with the selected formatting. Is there a way to jump from attributed text to attributed text without having to constantly go to the dialogue and select next each time?

Also, it would be helpful if JAWS reported the next occurrence. I thought that pressing F3 might do the trick, but for some reason it does not work.

If we use the attributes scheme, that does not help much, since she does not need to read the whole text.

It's for a proofreading job in Braille, where the text is present as a hardcopy and needs to be compared against the digital version. The original book has some highlighting that needs to match once the Braille version has been proofread.


Any help would be appreciated.


Regards,

Nermin


moderated Re: Including keystrokes in Speech History?

Bill White <billwhite92701@...>
 

Hi, Mark. There is no way currently to have key strokes included in Speech History. If there were, it could present a privacy concern. I think the only way you are going to have a log of keystrokes pressed is to install a key logger, which will present privacy concerns of its own.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mark
Sent: Wednesday, December 2, 2020 7:04 PM
To: main@jfw.groups.io
Subject: Including keystrokes in Speech History?

 

Does anyone know a way to have speech history include keystrokes that were pressed and not just what JAWS said? This would be a helpful way of recording a walk through of content.


moderated Including keystrokes in Speech History?

Mark
 

Does anyone know a way to have speech history include keystrokes that were pressed and not just what JAWS said? This would be a helpful way of recording a walk through of content.


moderated Re: Tapin radio & Preferences

Glenn / Lenny
 


Has anyone tried the Touch cursor?
Shift + PC cursor, tapping the PC cursor twice returns it back to a regular cursor.
I have found that unusable screens can usually be managed with the touch cursor.
The touch cursor is not for computers with a touch screen.
Glenn

----- Original Message -----
Sent: Wednesday, December 02, 2020 5:58 PM
Subject: Re: Tapin radio & Preferences

The problem seems specific to the Preference pane and I found exactly the problem described.

My suggestion is to use Narrator for this screen only.

David G.

 

Sent from Mail for Windows 10

 

From: Charles Krugman
Sent: 02 December 2020 23:21
To: main@jfw.groups.io
Subject: Re: Tapin radio & Preferences

 

I have been using it and have never had a problem. I use the arrow keys to move around the screen and it reads everything and is selectable. I’m not sure about the screen that you are talking about.

Chuck

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim L
Sent: Tuesday, December 1, 2020 9:18 PM
To: main@jfw.groups.io
Subject: Tapin radio & Preferences

 

 

Heya folks,

 

Can anyone help me with the best way to get round Tapin radio’s prefernces screen with Jaws? It just reads constantly many options at once and has been like this for ages.

 

Any help will be appreciated.

 

Cheers,

 

Jim

 

 

AVG logo

This email has been checked for viruses by AVG antivirus software.
www.avg.com



 


moderated Re: n v d a discussion list

 

On Wed, Dec 2, 2020 at 07:17 PM, David Diamond wrote:
How many posts does one get on the list mentioned below? 
-
You have quoted material that mentions both the NVDA Help Group, and the main NVDA Group.

In any case, regardless of the Groups.io group, it is a simple matter to set up message preview if you want to see the first message in any topic, and then make a decision to either follow it, allowing more through, or to do nothing, and no other messages from that particular topic will land in your inbox:

Controlling the Messages You Receive via E-Mail from Groups.io (docx)

 
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

One does not discover new lands without consenting to lose sight of the shore for a very long time.

           ~ André Gide


moderated Re: n v d a discussion list

David Diamond
 

How many posts does one get on the list mentioned below?  Not a exact #, just a ball park figure.  I was on a NVDA list, and the posts 98% of the time were so petulant, I left it.  Petulant, meaning arguing over minor things and expecting software to be perfect.  How can it be when imperfect people design it. A circle is just a circle and no amount of wining will change that.   

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Norma A. Boge
Sent: December 2, 2020 7:49 AM
To: main@jfw.groups.io
Subject: Re: n v d a discussion list

 

Another NVDA list

Subscribe: NVDAhelp+subscribe@groups.io

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Tuesday, December 1, 2020 12:38 PM
To: main@jfw.groups.io
Subject: Re: n v d a discussion list

 

You can get all you need at:

nvda@nvda.groups.io | Home

The subscription address and posting addrsses are all on that page.

HTH,

 

 

Richard

"The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.

There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss."

--Douglas Adams, from Life, The Universe and Everything, p.59

 

Check out my web site at: www.turner42.com

 

*I’m not the card shark

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of mike mcglashon
Sent: Tuesday, December 1, 2020 10:25 AM
To: main@jfw.groups.io
Subject: n v d a discussion list

 

Hi guys:

 

I apologize, but I have to ask this on this list;

 

If I recall,

There used to be a n v d a discussion paralleling this one;

Does anyone remember what the address for it is?

I have a n v d a question which I probably am not allowed to ask here;

 

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 


moderated Re: jaws 2021 and Zoom

David Diamond
 

Rebecca, I’ve not encountered the problem you mentioned.  I had 2020 and now have 2021 of JAWS, with no notification changes.  I have at least 2 zoom meetings per week and when someone joins or leaves, I’m told by JAWS.  At times I actually turn off JAWS as I don’t need to know all the time who joins and leaves.  Often their connection is weak so within a minute of leaving, they join again. 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 2, 2020 11:39 AM
To: main@jfw.groups.io
Subject: Re: jaws 2021 and Zoom

 

I don’t know if that is a function of the Zoom basic scripts but you might want to check to see if they are there.

I’ve not had need to use Zoom since Jaws 2021.

 

 

 

Richard

"The Hitch Hiker's Guide to the Galaxy has this to say on the subject of flying.

There is an art, it says, or rather, a knack to flying. The knack lies in learning how to throw yourself at the ground and miss."

--Douglas Adams, from Life, The Universe and Everything, p.59

 

Check out my web site at: www.turner42.com

 

*I’m not the card shark

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rebecca Ilniski
Sent: Wednesday, December 2, 2020 7:21 AM
To: main@jfw.groups.io
Subject: jaws 2021 and Zoom

 

Hi everyone.  For some reason when I installed Jaws 2021 my notifications in Zoom no longer read when someone comes online and so forth.  How can I fix this issue?  I have my setting to all speech when I’m on zoom and the notifications are checked.  Thanks.

 

Rebecca Ilniski and guide dog Marvin

Email: rilniski@...

Twitter: applegirl1994

 


moderated Re: Tapin radio & Preferences

David Griffith
 

The problem seems specific to the Preference pane and I found exactly the problem described.

My suggestion is to use Narrator for this screen only.

David G.

 

Sent from Mail for Windows 10

 

From: Charles Krugman
Sent: 02 December 2020 23:21
To: main@jfw.groups.io
Subject: Re: Tapin radio & Preferences

 

I have been using it and have never had a problem. I use the arrow keys to move around the screen and it reads everything and is selectable. I’m not sure about the screen that you are talking about.

Chuck

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim L
Sent: Tuesday, December 1, 2020 9:18 PM
To: main@jfw.groups.io
Subject: Tapin radio & Preferences

 

 

Heya folks,

 

Can anyone help me with the best way to get round Tapin radio’s prefernces screen with Jaws? It just reads constantly many options at once and has been like this for ages.

 

Any help will be appreciated.

 

Cheers,

 

Jim

 

 

AVG logo

This email has been checked for viruses by AVG antivirus software.
www.avg.com



 


moderated Re: Tapin radio & Preferences

David Griffith
 

I tried it and using Jaws 2021 I also can replicate your issue.

However as a workaround I found that unloading Jaws whilst on that screen and loading Narrator with control windows enter gave a much more pleasant experience.

David G.

 

Sent from Mail for Windows 10

 

From: Jim L
Sent: 02 December 2020 20:55
To: main@jfw.groups.io
Subject: Re: Tapin radio & Preferences

 

Yes I did, below check out there reply😊

 

Hello,

 

I’m afraid that is Jaws only problem.

 

Not sure what can be done about it.

 

Sorry about that.

 

Regards

Philip Oldaker

Raimersoft

 

 

Sent from Mail for Windows 10

 

From: Jim L
Sent: Tuesday, 1 December 2020 11:50 PM
To: support@...
Subject: Tapin Radio, Jaws screen reader & Preferences

 

Hello,

 

Am a registered user of your brilliant program Tapin Radio but for years now using latest Jaws screen reader and Tapin Radio’s preferences screen, Jaws reads constantly thru each individual option and its really hard for me to change preferences on that screen, has this issue been looked at, at  all? as I know from day dot you always made this program screen reader friendly.

 

Regards,

 

Jim

 

 

 

 

 

Regards,

 

Jim

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, 2 December 2020 1:26 PM
To: main@jfw.groups.io
Subject: Re: Tapin radio & Preferences

 

Have you contacted them?

support@...

 

Richard

 

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."

"Why, what did she tell you?"

"I don't know, I didn't listen."

-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

 

On Dec 1, 2020, at 9:18 PM, Jim L <jimscave@...> wrote:



 

Heya folks,

 

Can anyone help me with the best way to get round Tapin radio’s prefernces screen with Jaws? It just reads constantly many options at once and has been like this for ages.

 

Any help will be appreciated.

 

Cheers,

 

Jim

 

 


moderated Re: Tapin radio & Preferences

Jim L
 

 

Simple enough Charles, it’s the settings/preferences screen I am referring about, the main screen is super fine

 

Regards,

 

Jim

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Charles Krugman
Sent: Thursday, 3 December 2020 7:22 AM
To: main@jfw.groups.io
Subject: Re: Tapin radio & Preferences

 

I have been using it and have never had a problem. I use the arrow keys to move around the screen and it reads everything and is selectable. I’m not sure about the screen that you are talking about.

Chuck

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim L
Sent: Tuesday, December 1, 2020 9:18 PM
To: main@jfw.groups.io
Subject: Tapin radio & Preferences

 

 

Heya folks,

 

Can anyone help me with the best way to get round Tapin radio’s prefernces screen with Jaws? It just reads constantly many options at once and has been like this for ages.

 

Any help will be appreciated.

 

Cheers,

 

Jim

 

 


AVG logo

This email has been checked for viruses by AVG antivirus software.
www.avg.com




moderated Re: Tapin radio & Preferences

Charles Krugman
 

I have been using it and have never had a problem. I use the arrow keys to move around the screen and it reads everything and is selectable. I’m not sure about the screen that you are talking about.

Chuck

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim L
Sent: Tuesday, December 1, 2020 9:18 PM
To: main@jfw.groups.io
Subject: Tapin radio & Preferences

 

 

Heya folks,

 

Can anyone help me with the best way to get round Tapin radio’s prefernces screen with Jaws? It just reads constantly many options at once and has been like this for ages.

 

Any help will be appreciated.

 

Cheers,

 

Jim

 




AVG logo

This email has been checked for viruses by AVG antivirus software.
www.avg.com



moderated Re: JfW and Jarte Again

David Griffith
 

 

Yes that should work.

The only things to add I think it will come down as a zip from my dropbox which will have to  be extracted first.

Also I am not sure if it makes a difference here but I have avoided some install problems by using the application key and selecting run as administrator.

David G.

Sent from Mail for Windows 10

 

From: David Goldfield
Sent: 02 December 2020 10:23
To: main@jfw.groups.io
Subject: Re: JfW and Jarte Again

 

As the compatibility pack is an executable file you can just press the enter key while you are pointing to the file in order to install it.


David Goldfield,
Blindness Assistive Technology Specialist
JAWS Certified, 2019
 
WWW.DavidGoldfield.org

On 12/2/2020 5:11 AM, Jasmine Kotsay wrote:

Thank you, David.

I have one more question for you. How do I install it from downloads?

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Wednesday, December 2, 2020 2:09 AM
To: main@jfw.groups.io
Subject: Re: JfW and Jarte Again

 

 

This is the one I use which seems to work with Jarte though I have not checked it is the latest.

https://www.dropbox.com/sh/dsmlacv59ark765/AADIQ655hImpM4FJ0kYMIEQBa?dl=1

 

Sent from Mail for Windows 10

 

From: Jasmine Kotsay
Sent: 02 December 2020 09:22
To: main@jfw.groups.io
Subject: Re: JfW and Jarte Again

 

Hi,

I’ve probably exhausted this thread, but how do you get the added office package?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Saturday, November 28, 2020 1:04 AM
To: jfw@groups.io
Subject: JfW and Jarte Again

 

In view of the problem someone  experienced, as an experiment  I  went onto another machine without Jarte.

I too found the enable screenreader copied to clipboard instruction did not work.

However the following did.

  1. Install Jarte
  2. Close Jaws and start NVDA
  3. Start Jarte, Jarte will announce screen reader mode.
  4. Close NVDA and start Jaws. Restart Jarte and it sticks in screenreader mode for Jaws  also now.
  5. .Now finally  with Jarte in focus use Jaws F2 and find settings centre for Jarte and create the profile. Type edit in the search box and then tab down to uncheck enhanced edit mode.
  6. The only other thing I  think is to install the office Add in pack to improve Jarte compliance with Office Documents.

 

This all seems to work nicely to get a free Jaws accessible Word Processor for now.

 

David G.

Sent from Mail for Windows 10

 

 

 

 


moderated Re: excel with jaws

Van Lant, Robin
 

Ann, thank you! I found the setting and disabled it.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ann Byrne
Sent: Wednesday, December 2, 2020 2:33 PM
To: main@jfw.groups.io
Subject: Re: excel with jaws

That analysis pane thing can be turned off in file/options/general.
At 11:27 AM 12/2/2020, you wrote:
I can replicate what you are talking about. If a group of cells with
content is selected and then I hit either Control key, Excel opens some
sort of small pop-up with options in it. I hear JAWS say,
â€&#65533;Tab‑ Analysis Lens Formatting Tab‑ selected
rangeâ€&#65533;. If you hit escape, the pop-up goes away, still
leaving the cells selected, and you can do what you needed to do. I
only get this if I press Control alone.
If I press Control and Shift together or another command that requires
the Control plus another key, it does not occur.

Hope this helps.



From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of romance's
prince via groups.io
Sent: Tuesday, November 24, 2020 1:43 PM
To: main@jfw.groups.io
Subject: Re: excel with jaws


WARNING: This email originated externally.
Exercise caution. Think before clicking links or opening attachments.

hi Chris
for example when selecting cells we press CTRL+SHIFT+Down errow once i
live them excel open quick analysis page also when i'm in chart object
CTRL used to open chart toolpar so when click CTRL + another key mostly
open toolpar.
i'm using excel 2016 and jaws 2019
thanks
This communication may contain privileged and/or confidential
information. It is intended solely for the use of the addressee. No
confidentiality or privilege is waived or lost as a result of any
transmission errors. If you are not the intended recipient, you are
strictly prohibited from disclosing, copying, distributing or using any
of this information. If you have received this communication in error,
please contact the sender immediately and destroy the material in its
entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer,
solicitation, recommendation or commitment for any transaction or to
buy or sell any security or other financial product, and is not
intended as investment advice or as a confirmation of any transaction.
Any market price, indicative value, estimate, view, opinion, data or
other information herein is not warranted as to completeness or
accuracy, is subject to change without notice, and KeyBanc Capital
Markets Inc.
accepts no liability for its use or to update or keep it current. Any
views or opinions are those of the individual sender, not necessarily
of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities
representative employed by or associated with KeyBanc Capital Markets
Inc.
Member FINRA/SIPC and may also represent KeyBank National Association
(“KeyBank N.A.â€&#65533;).
Securities products and services are offered by KeyBanc Capital Markets
Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or
services from Key send an e-mail to DNERequests@key.com with 'No
Promotional E-mails' in the SUBJECT line.





This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: excel with jaws

Ann Byrne
 

That analysis pane thing can be turned off in file/options/general.

At 11:27 AM 12/2/2020, you wrote:
I can replicate what you are talking about. If a group of cells with content is selected and then I hit either Control key, Excel opens some sort of small pop-up with options in it. I hear JAWS say, â€&#65533;Tab‑ Analysis Lens Formatting Tab‑ selected rangeâ€&#65533;. If you hit escape, the pop-up goes away, still leaving the cells selected, and you can do what you needed to do. I only get this if I press Control alone. If I press Control and Shift together or another command that requires the Control plus another key, it does not occur.

Hope this helps.



From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of romance's prince via groups.io
Sent: Tuesday, November 24, 2020 1:43 PM
To: main@jfw.groups.io
Subject: Re: excel with jaws


WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

hi Chris
for example when selecting cells we press CTRL+SHIFT+Down errow
once i live them excel open quick analysis page
also when i'm in chart object CTRL used to open chart toolpar
so when click CTRL + another key mostly open toolpar.
i'm using excel 2016 and jaws 2019
thanks
This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.â€&#65533;). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@key.com with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: Tapin radio & Preferences

Jim L
 

Yes I did, below check out there reply😊

 

Hello,

 

I’m afraid that is Jaws only problem.

 

Not sure what can be done about it.

 

Sorry about that.

 

Regards

Philip Oldaker

Raimersoft

 

 

Sent from Mail for Windows 10

 

From: Jim L
Sent: Tuesday, 1 December 2020 11:50 PM
To: support@...
Subject: Tapin Radio, Jaws screen reader & Preferences

 

Hello,

 

Am a registered user of your brilliant program Tapin Radio but for years now using latest Jaws screen reader and Tapin Radio’s preferences screen, Jaws reads constantly thru each individual option and its really hard for me to change preferences on that screen, has this issue been looked at, at  all? as I know from day dot you always made this program screen reader friendly.

 

Regards,

 

Jim

 

 

 

 

 

Regards,

 

Jim

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, 2 December 2020 1:26 PM
To: main@jfw.groups.io
Subject: Re: Tapin radio & Preferences

 

Have you contacted them?

support@...

 

Richard

 

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."

"Why, what did she tell you?"

"I don't know, I didn't listen."

-- Douglas Adams, The Hitchhiker's Guide To The Galaxy



On Dec 1, 2020, at 9:18 PM, Jim L <jimscave@...> wrote:



 

Heya folks,

 

Can anyone help me with the best way to get round Tapin radio’s prefernces screen with Jaws? It just reads constantly many options at once and has been like this for ages.

 

Any help will be appreciated.

 

Cheers,

 

Jim

 


moderated Re: Free word processors

 

On Wed, Dec 2, 2020 at 02:11 PM, JM Casey wrote:
It does. But I guess questioning whether, for instance, complicated formatting done with libre will translate effectively to MS
-
MS Word can save and read Open Document Text (ODT) files natively as well.

Virtually all of the modern word processors can open the file formats created by their competitors, and save to that format, natively.  You can force conversions via Save As if you so choose, and there can be occasional small changes in formatting, but this is the product of changing the file format.  If you stick with whatever the original file format happens to be it should appear identically in any word processor that can read that file format natively (rather than doing a conversion on reading in to it's own default format "on the fly").
 
--

Brian - Windows 10 Pro, 64-Bit, Version
20H2, Build 19042
 
 

One does not discover new lands without consenting to lose sight of the shore for a very long time.

           ~ André Gide


moderated Re: Windows 10 home and the settings app

Andrew Summers
 

I forgot to say, I am using JAWS2021.

 

Andrew

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Andrew Summers via groups.io
Sent: 02 December 2020 19:57
To: JAWS <main@jfw.groups.io>
Subject: FW: Windows 10 home and the settings app

 

 

 

From: asummers112@... <asummers112@...>
Sent: 02 December 2020 19:23
To: access-uk@... (access-uk@...) <access-uk@...>
Subject: Windows 10 home and the settings app

 

Hi,

When I open the settings app, I get 3 options near the top and my name.

They are, log in, update, rewards. When I tab around.

How do I remove the above as I have a local account on my PC?

 

Andrew


moderated Re: Windows 10 home and the settings app

 

Hi,

These are headers added in recent feature updates, and you can’t remove them.

Cheers,

Joseph

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Andrew Summers via groups.io
Sent: Wednesday, December 2, 2020 11:57 AM
To: JAWS <main@jfw.groups.io>
Subject: FW: Windows 10 home and the settings app

 

 

 

From: asummers112@... <asummers112@...>
Sent: 02 December 2020 19:23
To: access-uk@... (access-uk@...) <access-uk@...>
Subject: Windows 10 home and the settings app

 

Hi,

When I open the settings app, I get 3 options near the top and my name.

They are, log in, update, rewards. When I tab around.

How do I remove the above as I have a local account on my PC?

 

Andrew


moderated Re: What is an accessible download "speed test" website?

Gerald Levy
 


The easiest and most accessible speed test is fast.com.  Just visit fast.com, and in a few seconds you will get your download speed in understandlable format.


Gerald



On 12/2/2020 2:39 PM, Richard B. McDonald wrote:

Hi!

 

I need to confirm the speed at which my Internet connection is able to download.  I am familiar with certain “speed test” websites for that purpose, but which is an accessible website for this?

 

Also, on a technical point, if I am on my WiFi and do this, is the test result 1) between the Internet and my WiFi router or 2) between the Internet and my laptop via the WiFi?  Is it better to plug-in my laptop into the router via an ethernet cable to do this test so as to make the test the “1” situation?  In considering the “2” situation, generally, what is a WiFi’s speed (assuming 4/4 signal strength bars) between the router and my laptop?

 

Thanks,

Richard

6581 - 6600 of 90900