Date   

moderated Re: focus 40 blue and BARD

Ashleigh Piccinino
 

Hello,
I think you go into your bookshelf on the BARDmobile app, look for the Braille book you want (this’ll b under th Braille books item in the library tab), and open the book. I haven’t worked with this much, but I think you need to next press m on your display to get to the beginning of your first volume of the book. Don’t hesitate to go to the help file on BARDmobile for more assistance. If you’d like, download the brf file into your computer, open up your focus drive—kinda hard to do but plug in the Focus while, at the same time pressing left pan and power at the same time. After that, navigate to your books in the scratchpad, paste the copied brf in, and make sure to close that and remove Focus with eject/safely remove hardware. After that, note that the brf is there in the books section of scratchpad and read that way. In that way, the display keeps your position/not sure ot would with BARDmobile.
Ashleigh Piccinino

On Feb 27, 2020, at 9:25 AM, Bill Tessore <billtessore@...> wrote:

Oops! I misread the original subject line. Never mind!

Shalom,

B ill Tessore
billtessore@...
On Feb 27, 2020, at 7:15 AM, Bill Tessore via Groups.Io <billtessore=gmail.com@groups.io> wrote:

Richard, I was not aware the El Braille had a Rotor, I thought that was a function of devices like smart phones and tablets. I was under the impression that this is something that the El Braille Does not have because it has no view screen. Is there something I don’t know about the El Braille? shalom,
Bill Tesser
billtessore@...
On Feb 27, 2020, at 6:49 AM, Richard Turner <richardturner42@...> wrote:
Open the BARD help file in the app and read section 7. You can navigate by headings using the VoiceOver rotor.


Richard

🖖 Live long and prosper


Check out my web site at: https://eur05.safelinks.protection.outlook.com/?url=www.turner42.com&amp;data=02%7C01%7C%7Ca79b6cc86f1347ac5c5208d7bb99521f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637184139482800809&amp;sdata=4tXooCG%2BPPbDMRxbmLoWh59LN1TD%2FjpzPHQFXXs1bSU%3D&amp;reserved=0

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimber Gardner
Sent: Thursday, February 27, 2020 6:44 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Hi,

I would open the file with wordpad and silence the synth so it isn't blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach is you won't be able to mark your place unless you actually insert something into the file. I used to write three asterisks and the words stopped reading here. That way when you open the book again you will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille display
with a downloaded bARD book? I downloaded it and the file is there but
I'll be darned if I know how to open it so I can read. Thanks for all
the help from all you experts out here.



Marlo from california





--
Kimberly








moderated Re: focus 40 blue and BARD

Marlo Green
 

Thank you so much, I got it an it works!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Friday, February 28, 2020 6:43 PM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD


2. Press and hold the Left Panning button while simultaneously powering on the display. Connect the Focus to your computer using the supplied USB cable, and the display will be recognized as a removable USB drive.


No, you cannot download a book from the iphone to the braille display. Maybe some day they will write an app for such, that's what it would take.



On 2/28/2020 19:43, Marlo Green wrote:
Yes, I have heard there was a key combination to show the braile display as a drive, do you know what the combination is?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Friday, February 28, 2020 5:39 PM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

As long as you put it in the booksfolder. No reason to pull the card, though; there is a keyboard combination you can use while you turn on the display to have it seen as an external drive. That litttle card isn't all that easy to deal with directly.



On 2/28/2020 18:51, Marlo Green wrote:
Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn /
Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach
is you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the
words stopped reading here. That way when you open the book again
you will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file
is there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california




--
Kimberly











moderated Re: focus 40 blue and BARD

Chris Hill
 

2. Press and hold the Left Panning  button while simultaneously powering on the display. Connect the Focus to your computer using the supplied USB cable,
and the display will be recognized as a removable USB drive.


No, you cannot download a book from the iphone to the braille display.  Maybe some day they will write an app for such, that's what it would take.

On 2/28/2020 19:43, Marlo Green wrote:
Yes, I have heard there was a key combination to show the braile display as a drive, do you know what the combination is?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Friday, February 28, 2020 5:39 PM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

As long as you put it in the booksfolder. No reason to pull the card, though; there is a keyboard combination you can use while you turn on the display to have it seen as an external drive. That litttle card isn't all that easy to deal with directly.



On 2/28/2020 18:51, Marlo Green wrote:
Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn /
Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach
is you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the
words stopped reading here. That way when you open the book again you
will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file is
there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california




--
Kimberly










moderated Re: : Com Pilot instructions

Glenn / Lenny
 

I'm not sure if Adobe will read data base files. But if it does, I'd
suggest that it's not the best choice for accessing such files.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 8:31 PM
Subject: Re: : Com Pilot instructions


Hi Glenn Well I opens the document then wait for 1 or 2 minute adobe
reader didn't appear on there where I would hear it's say adobe reader left
to right something so I can press enter on it


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 8:43 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Addison,
That sounds like it would be best for PDF files, not the type you want to
access.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 7:31 PM
Subject: Re: : Com Pilot instructions


Glenn I do have adobe reader


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.


moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Hi Glenn Well I opens the document then wait for 1 or 2 minute adobe reader didn't appear on there where I would hear it's say adobe reader left to right something so I can press enter on it

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn / Lenny
Sent: Friday, February 28, 2020 8:43 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Addison,
That sounds like it would be best for PDF files, not the type you want to
access.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 7:31 PM
Subject: Re: : Com Pilot instructions


Glenn I do have adobe reader


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.


moderated Re: focus 40 blue and BARD

Marlo Green
 

Another question about the key combination, can I download it from the iPhone to the braille display in this manner?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Friday, February 28, 2020 5:39 PM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

As long as you put it in the booksfolder. No reason to pull the card, though; there is a keyboard combination you can use while you turn on the display to have it seen as an external drive. That litttle card isn't all that easy to deal with directly.



On 2/28/2020 18:51, Marlo Green wrote:
Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn /
Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach
is you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the
words stopped reading here. That way when you open the book again you
will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file is
there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california




--
Kimberly








moderated Re: focus 40 blue and BARD

Marlo Green
 

Yes, I have heard there was a key combination to show the braile display as a drive, do you know what the combination is?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Friday, February 28, 2020 5:39 PM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

As long as you put it in the booksfolder. No reason to pull the card, though; there is a keyboard combination you can use while you turn on the display to have it seen as an external drive. That litttle card isn't all that easy to deal with directly.



On 2/28/2020 18:51, Marlo Green wrote:
Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn /
Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach
is you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the
words stopped reading here. That way when you open the book again you
will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file is
there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california




--
Kimberly








moderated Re: : Com Pilot instructions

Glenn / Lenny
 

Hi Addison,
That sounds like it would be best for PDF files, not the type you want to
access.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 7:31 PM
Subject: Re: : Com Pilot instructions


Glenn I do have adobe reader


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.


moderated Re: focus 40 blue and BARD

Chris Hill
 

As long as you put it in the booksfolder.  No reason to pull the card, though; there is a keyboard combination you can use while you turn on the display to have it seen as an external drive. That litttle card isn't all that easy to deal with directly.

On 2/28/2020 18:51, Marlo Green wrote:
Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach is
you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the words
stopped reading here. That way when you open the book again you will
be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file is
there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california




--
Kimberly







moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Glenn I do have adobe reader

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn / Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.


moderated Re: : Com Pilot instructions

O.Addison Gethers
 

OK Mario !! When I went back open the dbf file in attachment I press alt + p for print then the dialogue box open so I arrow up once intefro printer then press enter then I wait so it was scan into openbook then it was downloaded then jaws say please wait then a message came up to say call freedom scientific something ok button

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 5:15 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

if it does print something, it will be at the least gibberish because it
is not an image of text or is a document.
.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in
here,I was wondered if it's possible for me to try to used printer info
to scan with openbooks !! Do you think that might works? I'm going to
try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format
which holds tectual information. it isn't graphical nore is it a
document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction
Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's
OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is
dbf file when I press enter on the attachment then I press insert +
spacebar then letter o for OCR then I press letter d for document
then I waited jaws not reading anything yet !! What am I doing wrong in
here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may contain information that is privileged and or confidential and is
intended only for the individual or entity to which it is addressed. If
you are not the intended recipient, or agent responsible for delivering
this communication, you are hereby notified that any dissemination,
distribution, copying or disclosure of this communication is strictly
prohibited. If you have received this transmission in error, please
notify the sender immediately, and delete the original communication and
any attachment from any computer, server or other electronic recording
or storage device. Receipt by anyone other than the intended recipient
is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me that I receive from you today (Thursday) ? Also please tell me what
you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.









.


moderated Re: focus 40 blue and BARD

Marlo Green
 

Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach is
you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the words
stopped reading here. That way when you open the book again you will
be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file is
there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california





--
Kimberly



moderated Re: : Com Pilot instructions

Glenn / Lenny
 

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.


moderated Re: : Com Pilot instructions

Mario
 

if it does print something, it will be at the least gibberish because it is not an image of text or is a document.
.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in here,I was wondered if it's possible for me to try to used printer info to scan with openbooks !! Do you think that might works? I'm going to try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format
which holds tectual information. it isn't graphical nore is it a
document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction
Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's
OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is
dbf file when I press enter on the attachment then I press insert +
spacebar then letter o for OCR then I press letter d for document
then I waited jaws not reading anything yet !! What am I doing wrong in
here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may contain information that is privileged and or confidential and is
intended only for the individual or entity to which it is addressed. If
you are not the intended recipient, or agent responsible for delivering
this communication, you are hereby notified that any dissemination,
distribution, copying or disclosure of this communication is strictly
prohibited. If you have received this transmission in error, please
notify the sender immediately, and delete the original communication and
any attachment from any computer, server or other electronic recording
or storage device. Receipt by anyone other than the intended recipient
is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me that I receive from you today (Thursday) ? Also please tell me what
you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.









.


moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Hi David I'm going to try to see if printer info with openbooks will read dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson, David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which holds tectual information. it isn't graphical nore is it a document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom scientific technical support she ask me if I try with OCR then she give me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf file when I press enter on the attachment then I press insert + spacebar then letter o for OCR then I press letter d for document then I waited jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may contain information that is privileged and or confidential and is intended only for the individual or entity to which it is addressed. If you are not the intended recipient, or agent responsible for delivering this communication, you are hereby notified that any dissemination, distribution, copying or disclosure of this communication is strictly prohibited. If you have received this transmission in error, please notify the sender immediately, and delete the original communication and any attachment from any computer, server or other electronic recording or storage device. Receipt by anyone other than the intended recipient is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me that I receive from you today (Thursday) ? Also please tell me what you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and minimum the volume ?

Addison









.


moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Mario I was just doing some thinking while listen to your message in here,I was wondered if it's possible for me to try to used printer info to scan with openbooks !! Do you think that might works? I'm going to try it to se what happen from there.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format
which holds tectual information. it isn't graphical nore is it a
document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction
Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's
OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is
dbf file when I press enter on the attachment then I press insert +
spacebar then letter o for OCR then I press letter d for document
then I waited jaws not reading anything yet !! What am I doing wrong in
here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may contain information that is privileged and or confidential and is
intended only for the individual or entity to which it is addressed. If
you are not the intended recipient, or agent responsible for delivering
this communication, you are hereby notified that any dissemination,
distribution, copying or disclosure of this communication is strictly
prohibited. If you have received this transmission in error, please
notify the sender immediately, and delete the original communication and
any attachment from any computer, server or other electronic recording
or storage device. Receipt by anyone other than the intended recipient
is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me that I receive from you today (Thursday) ? Also please tell me what
you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.


moderated Re: : Com Pilot instructions

Patterson, David K (EOTSS)
 

No - JAWS OCR will not be able to read a .DBF because it is a database file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which holds tectual information. it isn't graphical nore is it a document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom scientific technical support she ask me if I try with OCR then she give me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019  with window10 desktop computer, this is dbf file  when I press enter on the attachment  then I press insert + spacebar  then letter o for OCR  then I press letter d for document then I waited  jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY  11050

516-944-8900 x235, 516-393-7709  Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may contain information that is privileged and or confidential and is intended only for the individual or entity to which it is addressed. If you are not the intended recipient, or agent responsible for delivering this communication, you are hereby notified that any dissemination, distribution, copying or disclosure of this communication is strictly prohibited. If you have received this transmission in error, please notify the sender immediately, and delete the original communication and any attachment from any computer, server or other electronic recording or storage device. Receipt by anyone other than the intended recipient is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me that I receive from you today (Thursday) ? Also  please tell me what you showed me the button on icon again by power switch  I know there is
2 button on top and what is the other 2 button for ? Is it to max and minimum the volume ?

Addison









.


moderated Re: Need step by instructions for setting up and using remote jaws for work.

Patterson, David K (EOTSS)
 

Hi -

JAWS requires a Remote Access license to allow it to be used in a remote access session - such as the windows Remote Desktop services.

You need the proper license installed on the client-side computer and software installed correctly on both the client and the “server/remote” computer.

To use remote access support, you must add remote authorization to an existing Professional or Home license of JAWS or Fusion. There is a one-time fee to add this Remote Access authorization option.

Here is a document from FS - https://support.freedomscientific.com/Content/Documents/Other/RemoteAccessAuthorizationInstructions.pdf


____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny via Groups.Io
Sent: Friday, February 28, 2020 1:58 PM
To: main@jfw.groups.io
Subject: Re: Need step by instructions for setting up and useing remote jaws for work.

If cost is an issue, perhaps you could use NVDA remote and use it with speech off, while using Jaws.
There could be a few keystroke conflicts, but that could be fixed.

Glenn

----- Original Message -----
From: "Mario" <mrb620@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 10:16 AM
Subject: Re: Need step by instructions for setting up and useing remote jaws for work.


if you're asking about the Remote Desktop built in to Windows, that's a different beast as opposed to JAWS Tandem. sorry I don't know but I assume that it would be a different keystroke.

-------- Original Message --------
From: Shannon [mailto:shannon@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 10:56 AM
Subject: Need step by instructions for setting up and useing remote jaws for work.
Ok, Thank yu for that but I need the Remote desktop control.
Is it different.
I need to get the laptop to remote into the desktop at work. Both on different internet connections so I can access the programs that run on my work desktop from home.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 8:39 AM
To: main@jfw.groups.io
Subject: Re: Need step by instructions for setting up and useing remote jaws for work.

for the regular Tandem, it is insert+alt+tab key which:
Toggles between the JAWS Tandem Controller window and the controller’s local computer.
Available only on the controler system, this keystroke suspends or resumes a JAWS Tandem session in order to toggle between the target system’s desktop and the controller system’s desktop.


-------- Original Message --------
From: Glenn / Lenny [mailto:glennervin@...]
To: <main@jfw.groups.io>
Date: Thursday, February 27, 2020, 8:31 PM
Subject: Need step by instructions for setting up and useing remote jaws for work.
Once you have taken control of a computer, it is just like being on the other computer.
There is a keyboard shortcut to toggle back and forth with Jaws Tandem as well, but I don't recall what it is.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 7:24 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws for work.


Ok, thanks again Glen.
I’ll take the laptop tomorrow and look at that setting. Are commands to use the remote copy of jaws the normal commands?
On Feb 27, 2020, at 7:05 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some reason.
But at any rate, I think you will need to initiate the connection from work first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:


Hi,
If you have exported your settings to a jaws settings file, you can eMail the file to your work, or bring it on a thumb drive and import it into the other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws for work.




















.








.


moderated Re: Microsoft Excel And Filters

Marty Hutchings
 

I tried to use filters yesterday, and had a hard time figuring out how to get back to the original state of my worksheet.  Thanks Steve for the Ctrl + Shift + L command.
 
Love in Christ
Marty
For our struggle is not against flesh and blood, but against the rulers, against the powers, against the world forces of this darkness, against the spiritual forces of wickedness in the heavenly places.
Therefore, take up the full armor of God, so that you will be able to resist in the evil day, and having done everything, to stand firm.
Ephesians 6:12, 13
 

Sent: Friday, February 28, 2020 4:03 AM
Subject: Re: Microsoft Excel And Filters
 
 

I use Ctrl + Shift + L to toggle filters on and off - although JAWS doesn't report the change.

 

Once I've pressed Alt + DownArrow on a filter, I press E to jump to the edit box, DownArrow once to Select All, then End to go to the last item in the list, which is usually blanks?

 

I'm using Excel 2016 and JAWS 2020.

 

Thanks,

Steve

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: 27 February 2020 20:39
To: main@jfw.groups.io
Subject: Re: Microsoft Excel And Filters

 

Yes.  You’ll want to leave the Select All option checked and arrow down to the last in the list below it, which is “(blanks)” and uncheck that.  Wish there was a quicker way to get to it, but arrowing down is the only way I’ve found.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Hicks Steven (CORNWALL IT SERVICES) via Groups.Io
Sent: Thursday, February 27, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: Microsoft Excel And Filters

 

Thanks so much, that is fantastic!

What I have is a colum going down, I just want to filter that colum so the blank cells are filtered out and the column only lists the cells where the entry is not blank e.g. contains a number.

I Think that it is the alt+down arrow that I could have been missing.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: 27 February 2020 17:36
To: main@jfw.groups.io
Subject: Re: Microsoft Excel And Filters

 

I use filters a lot.

 

Go to a cell in your header row, then hit the Filter button on the Data ribbon to turn on filters for that entire row of headers.

When you want to filter a particular column, go do that column header and hit alt down arrow to expand the filter choices.

I’m usually filtering on txt in the cells.  The easiest way I find to do this is to Shift tab back three times till I hear Select all.  You’ll be passing over a cancel button and an OK button. 

Then you arrow down the list of options, checking an unchecking the boxes you want to see or hide.  Annoyingly I cannot find a way to page down or use first letter navigation to quickly move through a long list. 

If you know you want to see most of the rows, but hide just a few, leave the Select All option at the top check and arrow down to find the few options you want to filter out.

If you want to hide a majority of rows and only see certain items, then uncheck the Select All option at the top and move down to place a check in the text items you want.

Once you have that done, you just tab once to the OK  button and hit enter. .JAWS does not read this button clearly; it sounds something more like type the text you want OK. 

 

Happy to talk more if you have specific questions as you try it.  

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Hicks Steven (CORNWALL IT SERVICES) via Groups.Io
Sent: Thursday, February 27, 2020 3:14 AM
To: main@jfw.groups.io
Subject: Microsoft Excel And Filters

 

Hi,

 

Has anyone managed to work out how to use filters with Microsoft excel and JAWS?

 



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail

A family of four are outside smiling

This email and any attachment to it are confidential. Unless you are the intended recipient, you may not use, copy, or disclose either the message or any information contained in the message.
If you are not the intended recipient, you should delete this email and notify the sender immediately.
Any views or opinions expressed in this email are those of the sender only, unless otherwise stated.
All emails, incoming and outgoing, may be recorded by Guide Dogs and monitored for legitimate business purposes.
Guide Dogs exclude all liability for any loss or damage arising or resulting from the receipt, use or transmission of this email to the fullest extent permitted by law.

The Guide Dogs for the Blind Association
Tel: 0118 983 5555
Email: guidedogs@...
Website: https://www.guidedogs.org.uk
Registered Office: Hillfields, Burghfield Common, Reading, Berkshire, RG7 3YG.
A company limited by guarantee, registered in England and Wales (291646) and a charity registered in England and Wales (209617) and Scotland (SC038979).


moderated Re: : Com Pilot instructions

Mario
 

I don't think Sherry knows that a DBF file stands for Data Base Format which holds tectual information. it isn't graphical nore is it a document, so JAWS's OCR won't work to read it.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction
Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's
OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019  with window10 desktop computer, this is
dbf file  when I press enter on the attachment  then I press insert +
spacebar  then letter o for OCR  then I press letter d for document
then I waited  jaws not reading anything yet !! What am I doing wrong in
here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY  11050

516-944-8900 x235, 516-393-7709  Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may contain information that is privileged and or confidential and is
intended only for the individual or entity to which it is addressed. If
you are not the intended recipient, or agent responsible for delivering
this communication, you are hereby notified that any dissemination,
distribution, copying or disclosure of this communication is strictly
prohibited. If you have received this transmission in error, please
notify the sender immediately, and delete the original communication and
any attachment from any computer, server or other electronic recording
or storage device. Receipt by anyone other than the intended recipient
is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me that I receive from you today (Thursday) ? Also  please tell me what
you showed me the button on icon again by power switch  I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.