Date   
moderated Re: Camera refuse to work on my new laptop

Chris Hill
 

Well, it sounds like either a driver issue, or more likely a hardware problem.  Either way, it is under warranty and the manufacturer is more likely to know about it than a random person on the internet.  Not fun, but that's why you buy something new with a warranty, just in case it was made on a Monday.

On 1/21/2020 21:12, Michael Munn wrote:

Hi all, I don’t know if y'all have been experianced this problem before that the camera on your laptop stop with no reason. I recently purchased a new laptop and today when I turn it on, And when I’m doing a recording on zoom with video, it says that it can’t connect to the camera. I called Microsoft through BME (Be My Eyes) and they can’t figure out the issue either. I’m sending this email just want to ask whether y'all has been experienced this issue before if so how did you resolved it
PS Microsoft’s disability answer desk threw Be My Eyes says that’s a hardware issue instead of the issue from the software.
Hope to hear from y'all. This

moderated Camera refuse to work on my new laptop

Michael Munn
 

Hi all, I don’t know if y'all have been experianced this problem before that the camera on your laptop stop with no reason. I recently purchased a new laptop and today when I turn it on, And when I’m doing a recording on zoom with video, it says that it can’t connect to the camera. I called Microsoft through BME (Be My Eyes) and they can’t figure out the issue either. I’m sending this email just want to ask whether y'all has been experienced this issue before if so how did you resolved it
PS Microsoft’s disability answer desk threw Be My Eyes says that’s a hardware issue instead of the issue from the software.
Hope to hear from y'all. This

moderated Re: Google Chrome Question

Pramit
 

Hi,

Rightly said by Jason, that you'll have to respond to the dialogue box that appears to save the password.
Also personally at times I face this challenge where even after the settings are Turned On to save the password but it still doesn't work, so let me share my personal work around for this. Mentioning it below and hope this helps.
1. Go to Chrome Settings and select "Autofill"
2. Under this there's an option - "Offer to save password"
3. Turn the - Offer to save password option OFF and then Turn it Back ON.

Now Below this you can also find the Saved Passwords that contains the list of all the websites whose passwords you have saved till date and below this you'll find "Never Saved". Also make sure the website whose password you want to save is not under Never Saved. 

After this simply close the Chrome browser once and open it up.

Hope this helps!

Pramit


On Tue, Jan 21, 2020 at 8:44 PM Sieghard Weitzel <sieghard@...> wrote:

I would highly recommend a proper password manager, I would not want my passwords remembered by my Browser, way to insecure.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jason White via Groups.Io
Sent: Tuesday, January 21, 2020 5:00 AM
To: main@jfw.groups.io
Subject: Re: Google Chrome Question

 

After you’ve entered the password and submitted it, there’s a dialogue to which you have to respond in order to save it. Try Shift+Tab from the top of the page, or Shift+F6 until you get ther.

 

From: <main@jfw.groups.io> on behalf of Pastor Gil Pries <gilp@...>
Reply-To: <main@jfw.groups.io>
Date: Tuesday, January 21, 2020 at 06:51
To: <main@jfw.groups.io>
Subject: Google Chrome Question

 

How do I get Google Chrome to prompt me about saving passwords?

I have autofill turned on and I pressed the button about passwords, but Google Chrome doesn’t retain my passwords.

Pastor Gil

moderated Re: Unable To Access Logitec Pop-up

Gmail Jonas
 

Windows  notification dialogue boxes  Will it work with mouse Tool tips popups?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Friday, January 17, 2020 8:49 PM
To: main@jfw.groups.io
Subject: Re: Unable To Access Logitec Pop-up

 

Hi Tom,
 
Try the following:
1. Open the, Ease of access center, from the control panel or from the search field.
 
2. Tab to, use the computer without a display link, and press enter.
 
3. Tab to the, how long should Windows  notification dialogue boxes stay open combobox.
4. Press, Alt + down arrow, to open the combobox, arrow up / down to how long you would like for these Balloon messages, or whatever the hell they're called
now, LOL  , to stay open.
 
5. Press enter to save the time settings, tab to Okay and press enter to save and close.


Take care.  Mike.  Sent from my iBarstool.

----- Original Message -----

From: Tom Behler

Sent: Friday, January 17, 2020 6:20 PM

Subject: Unable To Access Logitec Pop-up

 

Hello, everyone.

 

Within the last day or so, whenever I turn on my computer, I get a Logitec pop-up that wants me to install an update of some kind.

 

However, within a few seconds from when Jaws reads the pop-up, the pop-up disappears, and I can’t seem to do anything to get it back.

 

I purchased a Logitec K780 bluetooth key-board a month or two ago, which is why I’m sure I’m getting the pop-up.

 

Has anyone else with Logitec keyboards experienced this issue?  If so, have you figured out a way to deal with this pop-up?

 

Thank you!

 

Tom Behler

 

 

moderated Re: Find command not working accurately on the web

Norma A. Boge
 

Depending on the situation, the "refresh every 60 seconds" might be a good in-between setting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Tuesday, January 21, 2020 5:38 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

Hi, Adrian and Rahul. Page refresh can be turned off in the following way:

1. Press JAWS key or INSERT plus V to get to Quick Settings while your browser is open.
2. In the search box, type refresh. Arrow down to Refresh, and see if it says Automatically, (this is the default).
3. Press Space Bar until it says Off. Now Page refresh is off.

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adrian Spratt
Sent: Tuesday, January 21, 2020 3:06 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

Another way of expressing this is that F5 refreshes the screen. It isn't something you turn off.

Let me add that I typically follow F5 with the JAWS command insert-escape. In describer mode, JAWS calls this "repainting" the screen. To my way of thinking, it functions as a JAWS refresh.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rahul Bajaj
Sent: Tuesday, January 21, 2020 5:55 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

And what is the easiest way to turn off screen refresh? Thank you for your help.

Rahul



On 21/01/2020, Tim Ford <ttford@...> wrote:
In my humble experience, turning off the screen refresh will solve the
problems described below. I just press the F5 manual refresh command
when I need to, and that seems to work fine.

Tim Ford


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of JM
Casey
Sent: Tuesday, January 21, 2020 1:16 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

Yeah, not sure. It's a very useful command, but, it seems that
sometimes when web content is dynamic (iE, changing/refreshing/moving
regularly) it does not work. That's just my theory. I use this command
all the time but I know on the main page for a local food/restaurant
delivery service for instance, I cannot use this command to find a
restaurant on the page, and that's just one example. Not sure there is
a "fix" per se ... guess you could turn off automatic page refresh and
see what happens, but then you may run into other problems with a site.



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rahul Bajaj
Sent: January 21, 2020 3:36 PM
To: main@jfw.groups.io
Subject: Find command not working accurately on the web

Hi,

I Use JAWS 2019 with Chrome. Sometimes, when you perform a find
command [either with control+insert+f or with insert+f], JAWS
immediately says that there are no matching results. This is even
though I know for a fact that there are matching results on the page.
How can I fix this?



--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018) University of Oxford











--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018)
University of Oxford

moderated Re: Find command not working accurately on the web

Bill White
 

Hi, Adrian and Rahul. Page refresh can be turned off in the following way:

1. Press JAWS key or INSERT plus V to get to Quick Settings while your browser is open.
2. In the search box, type refresh. Arrow down to Refresh, and see if it says Automatically, (this is the default).
3. Press Space Bar until it says Off. Now Page refresh is off.

Bill White
billwhite92701@...

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Adrian Spratt
Sent: Tuesday, January 21, 2020 3:06 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

Another way of expressing this is that F5 refreshes the screen. It isn't something you turn off.

Let me add that I typically follow F5 with the JAWS command insert-escape. In describer mode, JAWS calls this "repainting" the screen. To my way of thinking, it functions as a JAWS refresh.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rahul Bajaj
Sent: Tuesday, January 21, 2020 5:55 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

And what is the easiest way to turn off screen refresh? Thank you for your help.

Rahul



On 21/01/2020, Tim Ford <ttford@...> wrote:
In my humble experience, turning off the screen refresh will solve the
problems described below. I just press the F5 manual refresh command
when I need to, and that seems to work fine.

Tim Ford


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of JM
Casey
Sent: Tuesday, January 21, 2020 1:16 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

Yeah, not sure. It's a very useful command, but, it seems that
sometimes when web content is dynamic (iE, changing/refreshing/moving
regularly) it does not work. That's just my theory. I use this command
all the time but I know on the main page for a local food/restaurant
delivery service for instance, I cannot use this command to find a
restaurant on the page, and that's just one example. Not sure there is
a "fix" per se ... guess you could turn off automatic page refresh and
see what happens, but then you may run into other problems with a site.



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rahul Bajaj
Sent: January 21, 2020 3:36 PM
To: main@jfw.groups.io
Subject: Find command not working accurately on the web

Hi,

I Use JAWS 2019 with Chrome. Sometimes, when you perform a find
command [either with control+insert+f or with insert+f], JAWS
immediately says that there are no matching results. This is even
though I know for a fact that there are matching results on the page.
How can I fix this?



--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018) University of Oxford











--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018)
University of Oxford

moderated Re: Find command not working accurately on the web

JM Casey
 

You can turn off *automatic* screen refresh. A lot of web content nowadays is not static and that means your screen is constantly being updated. This sometimes causes issues even with modern screen-readers, and particularly, the find command will not really work properly, as in the example I gave of the restaurant delivery homepage.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Adrian Spratt
Sent: January 21, 2020 6:06 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

Another way of expressing this is that F5 refreshes the screen. It isn't something you turn off.

Let me add that I typically follow F5 with the JAWS command insert-escape. In describer mode, JAWS calls this "repainting" the screen. To my way of thinking, it functions as a JAWS refresh.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rahul Bajaj
Sent: Tuesday, January 21, 2020 5:55 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

And what is the easiest way to turn off screen refresh? Thank you for your help.

Rahul



On 21/01/2020, Tim Ford <ttford@...> wrote:
In my humble experience, turning off the screen refresh will solve the
problems described below. I just press the F5 manual refresh command
when I need to, and that seems to work fine.

Tim Ford


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of JM
Casey
Sent: Tuesday, January 21, 2020 1:16 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

Yeah, not sure. It's a very useful command, but, it seems that
sometimes when web content is dynamic (iE, changing/refreshing/moving
regularly) it does not work. That's just my theory. I use this command
all the time but I know on the main page for a local food/restaurant
delivery service for instance, I cannot use this command to find a
restaurant on the page, and that's just one example. Not sure there is
a "fix" per se ... guess you could turn off automatic page refresh and
see what happens, but then you may run into other problems with a site.



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rahul Bajaj
Sent: January 21, 2020 3:36 PM
To: main@jfw.groups.io
Subject: Find command not working accurately on the web

Hi,

I Use JAWS 2019 with Chrome. Sometimes, when you perform a find
command [either with control+insert+f or with insert+f], JAWS
immediately says that there are no matching results. This is even
though I know for a fact that there are matching results on the page.
How can I fix this?



--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018) University of Oxford











--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018)
University of Oxford

moderated Re: Find command not working accurately on the web

Adrian Spratt
 

Another way of expressing this is that F5 refreshes the screen. It isn't something you turn off.

Let me add that I typically follow F5 with the JAWS command insert-escape. In describer mode, JAWS calls this "repainting" the screen. To my way of thinking, it functions as a JAWS refresh.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rahul Bajaj
Sent: Tuesday, January 21, 2020 5:55 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

And what is the easiest way to turn off screen refresh? Thank you for your help.

Rahul



On 21/01/2020, Tim Ford <ttford@...> wrote:
In my humble experience, turning off the screen refresh will solve the
problems described below. I just press the F5 manual refresh command
when I need to, and that seems to work fine.

Tim Ford


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of JM
Casey
Sent: Tuesday, January 21, 2020 1:16 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

Yeah, not sure. It's a very useful command, but, it seems that
sometimes when web content is dynamic (iE, changing/refreshing/moving
regularly) it does not work. That's just my theory. I use this command
all the time but I know on the main page for a local food/restaurant
delivery service for instance, I cannot use this command to find a
restaurant on the page, and that's just one example. Not sure there is
a "fix" per se ... guess you could turn off automatic page refresh and
see what happens, but then you may run into other problems with a site.



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rahul Bajaj
Sent: January 21, 2020 3:36 PM
To: main@jfw.groups.io
Subject: Find command not working accurately on the web

Hi,

I Use JAWS 2019 with Chrome. Sometimes, when you perform a find
command [either with control+insert+f or with insert+f], JAWS
immediately says that there are no matching results. This is even
though I know for a fact that there are matching results on the page.
How can I fix this?



--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018) University of Oxford











--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018)
University of Oxford

moderated Re: Find command not working accurately on the web

Rahul Bajaj
 

And what is the easiest way to turn off screen refresh? Thank you for your help.

Rahul

On 21/01/2020, Tim Ford <ttford@...> wrote:
In my humble experience, turning off the screen refresh will solve the
problems described below. I just press the F5 manual refresh command when I
need to, and that seems to work fine.

Tim Ford


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of JM Casey
Sent: Tuesday, January 21, 2020 1:16 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

Yeah, not sure. It's a very useful command, but, it seems that sometimes
when web content is dynamic (iE, changing/refreshing/moving regularly) it
does not work. That's just my theory. I use this command all the time but I
know on the main page for a local food/restaurant delivery service for
instance, I cannot use this command to find a restaurant on the page, and
that's just one example. Not sure there is a "fix" per se ... guess you
could turn off automatic page refresh and see what happens, but then you may
run into other problems with a site.



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rahul Bajaj
Sent: January 21, 2020 3:36 PM
To: main@jfw.groups.io
Subject: Find command not working accurately on the web

Hi,

I Use JAWS 2019 with Chrome. Sometimes, when you perform a find command
[either with control+insert+f or with insert+f], JAWS immediately says that
there are no matching results. This is even though I know for a fact that
there are matching results on the page.
How can I fix this?



--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018)
University of Oxford










--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018)
University of Oxford

moderated Re: Find command not working accurately on the web

Tim Ford
 

In my humble experience, turning off the screen refresh will solve the problems described below. I just press the F5 manual refresh command when I need to, and that seems to work fine.

Tim Ford

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of JM Casey
Sent: Tuesday, January 21, 2020 1:16 PM
To: main@jfw.groups.io
Subject: Re: Find command not working accurately on the web

Yeah, not sure. It's a very useful command, but, it seems that sometimes when web content is dynamic (iE, changing/refreshing/moving regularly) it does not work. That's just my theory. I use this command all the time but I know on the main page for a local food/restaurant delivery service for instance, I cannot use this command to find a restaurant on the page, and that's just one example. Not sure there is a "fix" per se ... guess you could turn off automatic page refresh and see what happens, but then you may run into other problems with a site.



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rahul Bajaj
Sent: January 21, 2020 3:36 PM
To: main@jfw.groups.io
Subject: Find command not working accurately on the web

Hi,

I Use JAWS 2019 with Chrome. Sometimes, when you perform a find command [either with control+insert+f or with insert+f], JAWS immediately says that there are no matching results. This is even though I know for a fact that there are matching results on the page.
How can I fix this?



--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018)
University of Oxford

moderated Re: Find command not working accurately on the web

JM Casey
 

Yeah, not sure. It's a very useful command, but, it seems that sometimes when web content is dynamic (iE, changing/refreshing/moving regularly) it does not work. That's just my theory. I use this command all the time but I know on the main page for a local food/restaurant delivery service for instance, I cannot use this command to find a restaurant on the page, and that's just one example. Not sure there is a "fix" per se ... guess you could turn off automatic page refresh and see what happens, but then you may run into other problems with a site.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rahul Bajaj
Sent: January 21, 2020 3:36 PM
To: main@jfw.groups.io
Subject: Find command not working accurately on the web

Hi,

I Use JAWS 2019 with Chrome. Sometimes, when you perform a find command [either with control+insert+f or with insert+f], JAWS immediately says that there are no matching results. This is even though I know for a fact that there are matching results on the page.
How can I fix this?



--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018)
University of Oxford

moderated Find command not working accurately on the web

Rahul Bajaj
 

Hi,

I Use JAWS 2019 with Chrome. Sometimes, when you perform a find
command [either with control+insert+f or with insert+f], JAWS
immediately says that there are no matching results. This is even
though I know for a fact that there are matching results on the page.
How can I fix this?



--
--
Rahul Bajaj
Candidate for the MPhil in Law
Rhodes Scholar (India and Linacre 2018)
University of Oxford

moderated Re: twitter

Orlando Enrique Fiol
 

At 12:00 PM 1/21/2020, Kimsan via Groups.Io wrote:
Any recommendations for a twitter client?
I generally love TWBlue's accessibility. However, it does not indicate how many replies or retweets a given tweet has. When I use the hotkey alt+windows+C to expand the conversation, I don't get shown any replies. I've compared the same tweets between Twitter's mobile app

and TWBlue. The mobile app indicates the number of replies and retweets, while TWBlue does not. Pressing enter on a tweet in the mobile app gives me access to a limited number of replies, with options to show more. If there are nested replies, I can access them as well. TWBlue will not show me any of these in any of its buffers.
Orlando Enrique Fiol

moderated Word 2019: temporary place marker changing selection point

Orlando Enrique Fiol
 

Hi all,

Using Word 2019 and JAWS 2020 on Windows 10 1909, when I set a temporary place marker for block text selection, the selection's beginning point gets set much earlier than the exact place where I set my marker. The end point, however, is accurate. Is anyone else experiencing this, and how to fix it?


Orlando Enrique Fiol

moderated Edge Question

William Vandervest
 

Is there a way to make the new edge handle graphics in the same way as internet explorer, in i-e linked images anounce as image link, but in edge they only anounce as a line of text as a link?

Thanks

 

William Vandervest

Timelord09@...

 

There are none so blind as those who will not se “anon”e

 

moderated twitter

Kimsan <kimsansong@...>
 

Hi,

Any recommendations for a twitter client?

Last time I was on twitter, I was using chicken nugget. Not sure what is going on with that right now.

I’m using jaws latest, windows 10 pro.

 

Thank you,

Sincerely,

Kimsan Song

kimsansong@...

 

moderated Re: Google Chrome Question

 

I would highly recommend a proper password manager, I would not want my passwords remembered by my Browser, way to insecure.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jason White via Groups.Io
Sent: Tuesday, January 21, 2020 5:00 AM
To: main@jfw.groups.io
Subject: Re: Google Chrome Question

 

After you’ve entered the password and submitted it, there’s a dialogue to which you have to respond in order to save it. Try Shift+Tab from the top of the page, or Shift+F6 until you get ther.

 

From: <main@jfw.groups.io> on behalf of Pastor Gil Pries <gilp@...>
Reply-To: <main@jfw.groups.io>
Date: Tuesday, January 21, 2020 at 06:51
To: <main@jfw.groups.io>
Subject: Google Chrome Question

 

How do I get Google Chrome to prompt me about saving passwords?

I have autofill turned on and I pressed the button about passwords, but Google Chrome doesn’t retain my passwords.

Pastor Gil

moderated New Edge And Jaws

Pastor Gil Pries
 

I went back to Edge and got the uia disabled and now it’s working fine.

 

Pastor Gil

moderated Google Chrome Question

Pastor Gil Pries
 

Thank you for replying.

I solved the pproblem.

 

Pastor Gil

moderated Google Chrome Question

Pastor Gil Pries
 

Hi Jason,

I couldn’t find the dialog.

 

Pastor Gil