Date   

moderated Re: opening attatchments with thunderbird.

michaeel's mail
 

Hi i open the email then press alt plus M then arrow up or down to open attatchments then right arrow and press enter to open it.

cheers Michael.

On 14/01/2021 7:38 pm, Michelle's Home Emails wrote:
hi list

I cannot open attatchments if I press enter on the link in the email although I know there is one there.

How do I open an attatchment tb and Jaws 2021 windows 10 64 bit.

Michelle Stevens.




moderated opening attatchments with thunderbird.

Michelle's Home Emails
 

hi list

I cannot open attatchments if I press enter on the link in the email although I know there is one there.

How do I open an attatchment tb and Jaws 2021 windows 10 64 bit.

Michelle Stevens.


moderated Re: Problem with outlook, office 365, and possibly, Jaws 2021

Maria Reyes
 

What’s interesting is that Jaws doesn’t read the new message at all, I just hear the sound.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kevin Minor
Sent: Wednesday, January 13, 2021 9:49 PM
To: main@jfw.groups.io
Subject: Re: Problem with outlook, office 365, and possibly, Jaws 2021

 

Hi Al.

 

When you’re not reading a message and you receive a new message in Outlook, is the new message still read? If so, sounds like you’re getting a notification. If you want this turned off, do a search for notifications. You’ll be able to control what happens. I turned off Outlook notifications, because this was annoying me.

 

Kevin, Valerie and Jilly

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Albert Cutolo
Sent: Wednesday, January 13, 2021 8:12 PM
To: main@jfw.groups.io
Subject: Problem with outlook, office 365, and possibly, Jaws 2021

 

               Good evening everyone, 

 

When I’m in my inbox,  I’ve been experiencing the following issue.  It seems that while I’m reading a message that’s open,  I’ll get a notification sound that tells me that I’m receiving a new message, which reads the header of the incoming message. It will just start reading the message  on top of the one that I’ve been reading.  If anyone on list here has a fix for this problem,  please let me know how I can correct this problem from happening in the future. 

 

Thanks in advance,

 

Al          


moderated Re: Question about enabling voice assistant using Jaws 2021.

E.M. Kirtley
 

One of their numbers is (727) 803-8600

 

 

 

 

From: Albert Cutolo
Sent: Wednesday, January 13, 2021 5:43 PM
To: main@jfw.groups.io
Subject: Question about enabling voice assistant using Jaws 2021.

 

Good afternoon everyone, 

 

Could someone please tell me where I should go too find out  how too enable voice assistant?  I’m using jaws 2021 with windows 10 on a laptop computer.  I didn’t  find anything where the setting senter option is, so that’s  why I’m asking this question. I did find something called application settings, but when I went in there, I didn’t see anything about voice assistant.  Also, how would I find the most and latest Jaws   up to date training materials on the Jaws training page, and where do I go too get too the jaws training page.

 

Thanks in advance, 

 

Al                

 


moderated Re: Looking for some ideas regarding a problem with Zoom, JAWS and a new USB mic

NFB Lab 4
 

Hi Jim. What I would do is pick up a USB soundcard. They’re about $10 and you plug your headphones into it. Then you route your jaws to those headphones. In zoom, you need to go to the audio settings and set the microphone to your blue yeti, and your speakers to the USB soundcard headset.


On Jan 13, 2021, at 9:03 PM, Milton Ota <mota1252@...> wrote:



Hello,

 

Have you played around with the JAWS Sound output found under the JAWS Utility Menu?

 

In there you can select where your speech output should be going.

 

Is your Mixer showing up as a plug and play?

 

You may have to make adjustments so that the mixer goes into the computer as a line in device if that is a USB mixer.

 

In Zoom you need to look under the audio settings under the setting menu and make sure your zoom call is going where you want it to go and then in the same audio section under setting you want to make sure that Zoom recognizes your microphone.

 

If you would like I’d be glad to do a Zoom call with you. I’m interested in the mike that you are using.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Portillo
Sent: Wednesday, January 13, 2021 7:03 PM
To: Jim Portillo <portillo.jim@...>
Subject: Looking for some ideas regarding a problem with Zoom, JAWS and a new USB mic

 

Greetings,

 

I’m not exactly sure who to ask, so I’ll just throw it out there. I figure this would be a good place to start.

For a few reasons, I bought a pretty high quality USB microphone (Blue-Yeti).  I want to be able to do some music and other things on Zoom, and this microphone will do quite a bit. The setup is very easy (plug-and-play), but that is also where things get interesting.

I’m using a PC laptop with JAWS as my primary computer. I encountered a couple of things.

First, when I plugged in the mic to the USB port, the audio from my computer went straight to the microphone. I didn’t know this until I plugged in headphones to the mic and heard the audio coming from there. I had to set the audio back to the computer, where I had computer speakers plugged in.

Is this normal? Someone else I know, who also has this microphone, encountered a similar issue. Once I set the audio back to the speakers, I thought things were fixed.

I launched Zoom and went ahead and did some mic tests to see how things sounded, and I figured once those tests sounded good, I’d be fine. The mic sounded great by the way, and I had Original Sound on, and a few strummed chords sounded good. Even just talking sounded much clearer. I heard no feedback through the speakers. I even did some recordings in a meeting I set up just for test purposes, and the recordings sounded fine.

Then, I ended up doing a quickconnect  zoom meeting with someone, and we noticed he was hearing an echo. We were just meeting to talk about things. We didn’t know where the echo was coming from. What was interesting was that he thought his echo was coming from his end, which ended up not being the case. He said my voice sounded fine. What he heard as an echo on his end, I heard as his voice coming in and out on mine, almost as if he was slightly breaking up.

We learned it was coming from my end after he had done some tests with other people. We tried meeting again, and the same issue happened. I figured I’d just not use the mic, since I was meeting with him informally. I tried unplugging the Yeti to see if it would go back to the internal computer mic. It didn’t. I plugged the mic back in, and I was able to be heard again, and the problem actually went away instantly, and we heard one another clearly. However, I could no longer hear JAWS. I don’t know if any other audio issues were going on. He sounded fine though.

Also, if I restart my computer without the mic plugged in, I can use Zoom with the laptop’s internal mic fine.

While it wouldn’t be ideal, I wouldn’t even mind starting a meeting, unplugging my mic and plugging it back in, and moving forward, but if I’m unable to hear JAWS, then that’s not good either.

I have no explanation for what might be happening and hope someone here might give some advice or ideas.

Jim

 


moderated Re: Jaws & Discussion Board in Blackboard

Russell Solowoniuk
 

Hi Justin,

Thank you for your response. Yes, as I mentioned in an earlier post, fire fox does work with the discussion board and blackboard.

Thanks again,

Russell

On Jan 13, 2021, at 7:52 PM, Justin Williams <justin.williams2@gmail.com> wrote:

I used firefox when I was in school also.

Try that.




-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ashleigh Piccinino
Sent: Wednesday, January 13, 2021 8:05 AM
To: main@jfw.groups.io
Subject: Re: Jaws & Discussion Board in Blackboard

You might want to look at the help topics on Blackboard about using JAWS. They say to have forms mode turned to manual, but even that doesn’t work all the time. I to am a frustrated Blackboard user/student who uses JAWS. I’ve dealt with this many times, so try Firefox for your browser. It seems to work the best out of all the browsers used.
On Jan 10, 2021, at 9:19 AM, Russell Solowoniuk <rsolowoniuk@gmail.com> wrote:

Hi Everyone,

I'm working with a student who is using Jaws 2021 and is enrolled in
an English course. The course is being delivered mostly online in
Blackboard, version 9.1, I believe.

The issue we are having is with the Discussion Board. The students
must post an introduction in the Discussion Board, and read and
respond to at least 2 other student introductions.

When the student clicks on "Create Thread" to start his introduction,
Jaws goes into "Application Mode. In this mode, the student can type
in the Subject line, but there seems to be no way to get to the editor
where the student must type in his introduction. Well, he can get to
it by tabbing twice, but once there, he is not able to type anything
in this editor, and there is no indication that he has entered the
editor. Jaws reads "Thread: Self introduction. – ENGL-102-AS07(1) -
2021 Win..." when tabbing twice from the subject field. We can confirm
that no text is being entered when typing by getting out of
Applications Mode and narrowing down to where the Word count is shown,
and it shows 0 words. The student is able to type his introduction in
Word, copy all the text, and then paste it into the editor, but can
not then read what he has pasted. We know the text has been pasted by
the Word count, and once he submits his post, we are able to open it
and read it with Jaws.
The same thing happens when trying to respond to another student's
introduction. He is able to read the introduction, press enter on
"Reply" but cannot type or even know when or if he is in the Editor.
He is able to type the response in Word, and copy and paste it into
the Editor, but it seems like sometimes pressing tab twice from the
subject field takes him into the editor, and sometimes he must tab 3
times, and since there is no indication that he is in the Editor, it
is really hit and miss and quite frustrating.

Are there settings in Blackboard that can be changed to allow Jaws to
work with the Editor in the Discussions area? Are there any Jaws
settings that can be changed to make this work?

I also experience this same issue on my PC, so it's not specific to
the student's computer. The problem also exists with NVDA. We are both
running Windows 10 and Jaws 2021.

Any ideas would be greatly appreciated.

Thank you,

Russell














moderated Re: Jaws & Discussion Board in Blackboard

Russell Solowoniuk
 

Hi Ashleigh,

Thank you for your response. You are right. We tried fire fox, and the discussion board works great with it. The only trouble is, with fire fox, we aren’t able to upload a word document to submit an assignment. The window to select the file to attach isn’t accessible in Firefox. Luckily it does work in chrome, so we just have to keep switching browsers.

Thanks again,

Russell

On Jan 13, 2021, at 6:05 AM, Ashleigh Piccinino <apiccinino@outlook.com> wrote:

You might want to look at the help topics on Blackboard about using JAWS. They say to have forms mode turned to manual, but even that doesn’t work all the time. I to am a frustrated Blackboard user/student who uses JAWS. I’ve dealt with this many times, so try Firefox for your browser. It seems to work the best out of all the browsers used.
On Jan 10, 2021, at 9:19 AM, Russell Solowoniuk <rsolowoniuk@gmail.com> wrote:

Hi Everyone,

I'm working with a student who is using Jaws 2021 and is enrolled in
an English course. The course is being delivered mostly online in
Blackboard, version 9.1, I believe.

The issue we are having is with the Discussion Board. The students
must post an introduction in the Discussion Board, and read and
respond to at least 2 other student introductions.

When the student clicks on "Create Thread" to start his introduction,
Jaws goes into "Application Mode. In this mode, the student can type
in the Subject line, but there seems to be no way to get to the editor
where the student must type in his introduction. Well, he can get to
it by tabbing twice, but once there, he is not able to type anything
in this editor, and there is no indication that he has entered the
editor. Jaws reads "Thread: Self introduction. – ENGL-102-AS07(1) -
2021 Win..." when tabbing twice from the subject field. We can confirm
that no text is being entered when typing by getting out of
Applications Mode and narrowing down to where the Word count is shown,
and it shows 0 words. The student is able to type his introduction in
Word, copy all the text, and then paste it into the editor, but can
not then read what he has pasted. We know the text has been pasted by
the Word count, and once he submits his post, we are able to open it
and read it with Jaws.
The same thing happens when trying to respond to another student's
introduction. He is able to read the introduction, press enter on
"Reply" but cannot type or even know when or if he is in the Editor.
He is able to type the response in Word, and copy and paste it into
the Editor, but it seems like sometimes pressing tab twice from the
subject field takes him into the editor, and sometimes he must tab 3
times, and since there is no indication that he is in the Editor, it
is really hit and miss and quite frustrating.

Are there settings in Blackboard that can be changed to allow Jaws to
work with the Editor in the Discussions area? Are there any Jaws
settings that can be changed to make this work?

I also experience this same issue on my PC, so it's not specific to
the student's computer. The problem also exists with NVDA. We are both
running Windows 10 and Jaws 2021.

Any ideas would be greatly appreciated.

Thank you,

Russell








moderated Re: Jaws & Discussion Board in Blackboard

Justin Williams
 

I used firefox when I was in school also.

Try that.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ashleigh Piccinino
Sent: Wednesday, January 13, 2021 8:05 AM
To: main@jfw.groups.io
Subject: Re: Jaws & Discussion Board in Blackboard

You might want to look at the help topics on Blackboard about using JAWS. They say to have forms mode turned to manual, but even that doesn’t work all the time. I to am a frustrated Blackboard user/student who uses JAWS. I’ve dealt with this many times, so try Firefox for your browser. It seems to work the best out of all the browsers used.
On Jan 10, 2021, at 9:19 AM, Russell Solowoniuk <rsolowoniuk@gmail.com> wrote:

Hi Everyone,

I'm working with a student who is using Jaws 2021 and is enrolled in
an English course. The course is being delivered mostly online in
Blackboard, version 9.1, I believe.

The issue we are having is with the Discussion Board. The students
must post an introduction in the Discussion Board, and read and
respond to at least 2 other student introductions.

When the student clicks on "Create Thread" to start his introduction,
Jaws goes into "Application Mode. In this mode, the student can type
in the Subject line, but there seems to be no way to get to the editor
where the student must type in his introduction. Well, he can get to
it by tabbing twice, but once there, he is not able to type anything
in this editor, and there is no indication that he has entered the
editor. Jaws reads "Thread: Self introduction. – ENGL-102-AS07(1) -
2021 Win..." when tabbing twice from the subject field. We can confirm
that no text is being entered when typing by getting out of
Applications Mode and narrowing down to where the Word count is shown,
and it shows 0 words. The student is able to type his introduction in
Word, copy all the text, and then paste it into the editor, but can
not then read what he has pasted. We know the text has been pasted by
the Word count, and once he submits his post, we are able to open it
and read it with Jaws.
The same thing happens when trying to respond to another student's
introduction. He is able to read the introduction, press enter on
"Reply" but cannot type or even know when or if he is in the Editor.
He is able to type the response in Word, and copy and paste it into
the Editor, but it seems like sometimes pressing tab twice from the
subject field takes him into the editor, and sometimes he must tab 3
times, and since there is no indication that he is in the Editor, it
is really hit and miss and quite frustrating.

Are there settings in Blackboard that can be changed to allow Jaws to
work with the Editor in the Discussions area? Are there any Jaws
settings that can be changed to make this work?

I also experience this same issue on my PC, so it's not specific to
the student's computer. The problem also exists with NVDA. We are both
running Windows 10 and Jaws 2021.

Any ideas would be greatly appreciated.

Thank you,

Russell





moderated Re: Problem with outlook, office 365, and possibly, Jaws 2021

Kevin Minor
 

Hi Al.

 

When you’re not reading a message and you receive a new message in Outlook, is the new message still read? If so, sounds like you’re getting a notification. If you want this turned off, do a search for notifications. You’ll be able to control what happens. I turned off Outlook notifications, because this was annoying me.

 

Kevin, Valerie and Jilly

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Albert Cutolo
Sent: Wednesday, January 13, 2021 8:12 PM
To: main@jfw.groups.io
Subject: Problem with outlook, office 365, and possibly, Jaws 2021

 

               Good evening everyone, 

 

When I’m in my inbox,  I’ve been experiencing the following issue.  It seems that while I’m reading a message that’s open,  I’ll get a notification sound that tells me that I’m receiving a new message, which reads the header of the incoming message. It will just start reading the message  on top of the one that I’ve been reading.  If anyone on list here has a fix for this problem,  please let me know how I can correct this problem from happening in the future. 

 

Thanks in advance,

 

Al          


moderated Re: Problem with outlook, office 365, and possibly, Jaws 2021

Milton Ota
 

Hi,

 

In Outlook do you have the Reading Pane turned on, if so, it is best to turn that off and when you want to read a message in your Inbox just press Enter to open the message and it should begin to automatically read.

 

You might want to see if Action Center is in your System Tray and open that and turn off the Notification.

 

See if that helps.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Albert Cutolo
Sent: Wednesday, January 13, 2021 7:12 PM
To: main@jfw.groups.io
Subject: Problem with outlook, office 365, and possibly, Jaws 2021

 

               Good evening everyone, 

 

When I’m in my inbox,  I’ve been experiencing the following issue.  It seems that while I’m reading a message that’s open,  I’ll get a notification sound that tells me that I’m receiving a new message, which reads the header of the incoming message. It will just start reading the message  on top of the one that I’ve been reading.  If anyone on list here has a fix for this problem,  please let me know how I can correct this problem from happening in the future. 

 

Thanks in advance,

 

Al          


moderated Re: Looking for some ideas regarding a problem with Zoom, JAWS and a new USB mic

Milton Ota
 

Hello,

 

Have you played around with the JAWS Sound output found under the JAWS Utility Menu?

 

In there you can select where your speech output should be going.

 

Is your Mixer showing up as a plug and play?

 

You may have to make adjustments so that the mixer goes into the computer as a line in device if that is a USB mixer.

 

In Zoom you need to look under the audio settings under the setting menu and make sure your zoom call is going where you want it to go and then in the same audio section under setting you want to make sure that Zoom recognizes your microphone.

 

If you would like I’d be glad to do a Zoom call with you. I’m interested in the mike that you are using.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Portillo
Sent: Wednesday, January 13, 2021 7:03 PM
To: Jim Portillo <portillo.jim@...>
Subject: Looking for some ideas regarding a problem with Zoom, JAWS and a new USB mic

 

Greetings,

 

I’m not exactly sure who to ask, so I’ll just throw it out there. I figure this would be a good place to start.

For a few reasons, I bought a pretty high quality USB microphone (Blue-Yeti).  I want to be able to do some music and other things on Zoom, and this microphone will do quite a bit. The setup is very easy (plug-and-play), but that is also where things get interesting.

I’m using a PC laptop with JAWS as my primary computer. I encountered a couple of things.

First, when I plugged in the mic to the USB port, the audio from my computer went straight to the microphone. I didn’t know this until I plugged in headphones to the mic and heard the audio coming from there. I had to set the audio back to the computer, where I had computer speakers plugged in.

Is this normal? Someone else I know, who also has this microphone, encountered a similar issue. Once I set the audio back to the speakers, I thought things were fixed.

I launched Zoom and went ahead and did some mic tests to see how things sounded, and I figured once those tests sounded good, I’d be fine. The mic sounded great by the way, and I had Original Sound on, and a few strummed chords sounded good. Even just talking sounded much clearer. I heard no feedback through the speakers. I even did some recordings in a meeting I set up just for test purposes, and the recordings sounded fine.

Then, I ended up doing a quickconnect  zoom meeting with someone, and we noticed he was hearing an echo. We were just meeting to talk about things. We didn’t know where the echo was coming from. What was interesting was that he thought his echo was coming from his end, which ended up not being the case. He said my voice sounded fine. What he heard as an echo on his end, I heard as his voice coming in and out on mine, almost as if he was slightly breaking up.

We learned it was coming from my end after he had done some tests with other people. We tried meeting again, and the same issue happened. I figured I’d just not use the mic, since I was meeting with him informally. I tried unplugging the Yeti to see if it would go back to the internal computer mic. It didn’t. I plugged the mic back in, and I was able to be heard again, and the problem actually went away instantly, and we heard one another clearly. However, I could no longer hear JAWS. I don’t know if any other audio issues were going on. He sounded fine though.

Also, if I restart my computer without the mic plugged in, I can use Zoom with the laptop’s internal mic fine.

While it wouldn’t be ideal, I wouldn’t even mind starting a meeting, unplugging my mic and plugging it back in, and moving forward, but if I’m unable to hear JAWS, then that’s not good either.

I have no explanation for what might be happening and hope someone here might give some advice or ideas.

Jim

 


moderated Re: Question about enabling voice assistant using Jaws 2021.

Bill White <billwhite92701@...>
 

Hi, Albert. The settings for Voice Assistant are in JAWS Utilities. So, JAWS key plus J. If you have JAWS in the System Tray, press ENTER on Voice Assistant in Utilities. It is now the first option. Then Arrow down to Settings and press ENTER. Once you use Right Arrow to open Voice Assistant Settings, you will encounter the following options. If you don't have JAWS set to give permission to collect anonymous user data, you will hear the following,

 

Enable Voice AssistantUnavailable
Only available when Anonymous Usage Data collection is enabled. Press the Talk to JAWS hotkey, the default is Insert Alt Space, to enable Anonymous Usage Data collection and start Voice Assistant. Close and reopen Settings Center to change settings.
1 of 5
Voice Assistant

Under this option, you will see the following three options,

 

Listen for wake word Sharky

Enable Voice Assistant sounds ‑
Microphone Input Device

 

Make sure the first two options are checked.

Make sure the microphone is the one you wish to use for JAWS voice commands.

 

I didn't need any additional training materials to use Voice Assistant. I just went to JAWS Help, selected JAWS Help Topics, pressed CONTROL plus TAB to get to the index page, typed in Voice Assistant, pressed ENTER, followed by F6. This opens the topic for reading. All the commands for Voice Assistant are listed, including the "wake word" which is Sharky.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Albert Cutolo
Sent: Wednesday, January 13, 2021 11:17 AM
To: main@jfw.groups.io
Subject: Question about enabling voice assistant using Jaws 2021.

 

Good afternoon everyone, 

 

Could someone please tell me where I should go too find out  how too enable voice assistant?  I’m using jaws 2021 with windows 10 on a laptop computer.  I didn’t  find anything where the setting senter option is, so that’s  why I’m asking this question. I did find something called application settings, but when I went in there, I didn’t see anything about voice assistant.  Also, how would I find the most and latest Jaws   up to date training materials on the Jaws training page, and where do I go too get too the jaws training page.

 

Thanks in advance, 

 

Al                


moderated Problem with outlook, office 365, and possibly, Jaws 2021

Albert Cutolo
 

               Good evening everyone, 

 

When I’m in my inbox,  I’ve been experiencing the following issue.  It seems that while I’m reading a message that’s open,  I’ll get a notification sound that tells me that I’m receiving a new message, which reads the header of the incoming message. It will just start reading the message  on top of the one that I’ve been reading.  If anyone on list here has a fix for this problem,  please let me know how I can correct this problem from happening in the future. 

 

Thanks in advance,

 

Al          


moderated Question about enabling voice assistant using Jaws 2021.

Albert Cutolo
 

Good afternoon everyone, 

 

Could someone please tell me where I should go too find out  how too enable voice assistant?  I’m using jaws 2021 with windows 10 on a laptop computer.  I didn’t  find anything where the setting senter option is, so that’s  why I’m asking this question. I did find something called application settings, but when I went in there, I didn’t see anything about voice assistant.  Also, how would I find the most and latest Jaws   up to date training materials on the Jaws training page, and where do I go too get too the jaws training page.

 

Thanks in advance, 

 

Al                


moderated Re: Looking for some ideas regarding a problem with Zoom, JAWS and a new USB mic

Michael Amaro
 

My guess is that, the microphone has its own sound card.  Jaws might be getting rerouted to it.

Sent: Wednesday, January 13, 2021 5:02 PM
Subject: Looking for some ideas regarding a problem with Zoom, JAWS and a new USB mic

Greetings,

 

I’m not exactly sure who to ask, so I’ll just throw it out there. I figure this would be a good place to start.

For a few reasons, I bought a pretty high quality USB microphone (Blue-Yeti).  I want to be able to do some music and other things on Zoom, and this microphone will do quite a bit. The setup is very easy (plug-and-play), but that is also where things get interesting.

I’m using a PC laptop with JAWS as my primary computer. I encountered a couple of things.

First, when I plugged in the mic to the USB port, the audio from my computer went straight to the microphone. I didn’t know this until I plugged in headphones to the mic and heard the audio coming from there. I had to set the audio back to the computer, where I had computer speakers plugged in.

Is this normal? Someone else I know, who also has this microphone, encountered a similar issue. Once I set the audio back to the speakers, I thought things were fixed.

I launched Zoom and went ahead and did some mic tests to see how things sounded, and I figured once those tests sounded good, I’d be fine. The mic sounded great by the way, and I had Original Sound on, and a few strummed chords sounded good. Even just talking sounded much clearer. I heard no feedback through the speakers. I even did some recordings in a meeting I set up just for test purposes, and the recordings sounded fine.

Then, I ended up doing a quick zoom meeting with someone, and we noticed he was hearing an echo. We were just meeting to talk about things. We didn’t know where the echo was coming from. What was interesting was that he thought his echo was coming from his end, which ended up not being the case. He said my voice sounded fine. What he heard as an echo on his end, I heard as his voice coming in and out on mine, almost as if he was slightly breaking up.

We learned it was coming from my end after he had done some tests with other people. We tried meeting again, and the same issue happened. I figured I’d just not use the mic, since I was meeting with him informally. I tried unplugging the Yeti to see if it would go back to the internal computer mic. It didn’t. I plugged the mic back in, and I was able to be heard again, and the problem actually went away instantly, and we heard one another clearly. However, I could no longer hear JAWS. I don’t know if any other audio issues were going on. He sounded fine though.

Also, if I restart my computer without the mic plugged in, I can use Zoom with the laptop’s internal mic fine.

While it wouldn’t be ideal, I wouldn’t even mind starting a meeting, unplugging my mic and plugging it back in, and moving forward, but if I’m unable to hear JAWS, then that’s not good either.

I have no explanation for what might be happening and hope someone here might give some advice or ideas.

Jim

 


moderated Looking for some ideas regarding a problem with Zoom, JAWS and a new USB mic

Jim Portillo
 

Greetings,

 

I’m not exactly sure who to ask, so I’ll just throw it out there. I figure this would be a good place to start.

For a few reasons, I bought a pretty high quality USB microphone (Blue-Yeti).  I want to be able to do some music and other things on Zoom, and this microphone will do quite a bit. The setup is very easy (plug-and-play), but that is also where things get interesting.

I’m using a PC laptop with JAWS as my primary computer. I encountered a couple of things.

First, when I plugged in the mic to the USB port, the audio from my computer went straight to the microphone. I didn’t know this until I plugged in headphones to the mic and heard the audio coming from there. I had to set the audio back to the computer, where I had computer speakers plugged in.

Is this normal? Someone else I know, who also has this microphone, encountered a similar issue. Once I set the audio back to the speakers, I thought things were fixed.

I launched Zoom and went ahead and did some mic tests to see how things sounded, and I figured once those tests sounded good, I’d be fine. The mic sounded great by the way, and I had Original Sound on, and a few strummed chords sounded good. Even just talking sounded much clearer. I heard no feedback through the speakers. I even did some recordings in a meeting I set up just for test purposes, and the recordings sounded fine.

Then, I ended up doing a quick zoom meeting with someone, and we noticed he was hearing an echo. We were just meeting to talk about things. We didn’t know where the echo was coming from. What was interesting was that he thought his echo was coming from his end, which ended up not being the case. He said my voice sounded fine. What he heard as an echo on his end, I heard as his voice coming in and out on mine, almost as if he was slightly breaking up.

We learned it was coming from my end after he had done some tests with other people. We tried meeting again, and the same issue happened. I figured I’d just not use the mic, since I was meeting with him informally. I tried unplugging the Yeti to see if it would go back to the internal computer mic. It didn’t. I plugged the mic back in, and I was able to be heard again, and the problem actually went away instantly, and we heard one another clearly. However, I could no longer hear JAWS. I don’t know if any other audio issues were going on. He sounded fine though.

Also, if I restart my computer without the mic plugged in, I can use Zoom with the laptop’s internal mic fine.

While it wouldn’t be ideal, I wouldn’t even mind starting a meeting, unplugging my mic and plugging it back in, and moving forward, but if I’m unable to hear JAWS, then that’s not good either.

I have no explanation for what might be happening and hope someone here might give some advice or ideas.

Jim

 


moderated Re: Does Google Hangout work with Jaws

John Covici
 

I think they want you to use google meet, but I am not sure -- depends
what you want to do.

On Wed, 13 Jan 2021 16:05:14 -0500,
Maria Reyes wrote:

Wait what are they going to replace it with?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Wednesday, January 13, 2021 4:10 AM
To: main@jfw.groups.io
Subject: Re: Does Google Hangout work with Jaws

Hangouts is going away within a few monthis, just to lte you know.

On Tue, 12 Jan 2021 18:58:11 -0500,
kevin meyers wrote:

[1 <text/plain; us-ascii (7bit)>]
Hello,

Are there any issues when using Google Hangout and Jaws2021?

Thanks,

Kevin








[2 <text/html; us-ascii (quoted-printable)>]
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com










--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


moderated Re: Another Outlook question

Dan Longmore
 

Hi,
With IPhone app you can select "all inboxes"
If you want to see all your mail without switching accounts. FYI.

Dan

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Joseph Hudson
Sent: Tuesday, January 12, 2021 9:44 PM
To: main@jfw.groups.io
Subject: Re: Another Outlook question

Well, I know on the iPhone app, this is something that you have to do as a constant. Because it's the only way that you can see all of your mail. As for doing it in the Outlook program, all I've had to do is switch from each account whenever I used to use Outlook.
On Jan 12, 2021, at 7:32 PM, Maria Reyes <reyesm191@outlook.com> wrote:

Yeah I know I’ve been asking a lot about Outlook, but last question of the day. 😊 Where do I disable the focus inbox? I really don’t want to be switching between focused and other all the time.


moderated Re: Does Google Hangout work with Jaws

Dan Longmore
 

Google duo is what they are promoting although I am not certain if this is
considered a replacement.

Dan

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Maria Reyes
Sent: Wednesday, January 13, 2021 4:05 PM
To: main@jfw.groups.io
Subject: Re: Does Google Hangout work with Jaws

Wait what are they going to replace it with?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of John Covici
Sent: Wednesday, January 13, 2021 4:10 AM
To: main@jfw.groups.io
Subject: Re: Does Google Hangout work with Jaws

Hangouts is going away within a few monthis, just to lte you know.

On Tue, 12 Jan 2021 18:58:11 -0500,
kevin meyers wrote:

[1 <text/plain; us-ascii (7bit)>]
Hello,

Are there any issues when using Google Hangout and Jaws2021?

Thanks,

Kevin








[2 <text/html; us-ascii (quoted-printable)>]
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@ccs.covici.com


moderated Re: bandcamp

JM Casey
 

I remember having issues at one point (maybe back in 2017 and prior) getting the player on the website to actually work – clicking the button was problematic. Somewhere along the line thought aht got remedied. I don’t remember any other real issues..maybe give ita  whirl and see what happens. They would definitely be receptive to your feedback if you have problems. Bandcamp is a good company.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sharon
Sent: January 13, 2021 05:38 PM
To: main@jfw.groups.io
Subject: **** [SUSPECTED SPAM] ****Re: bandcamp

 

It has been a long time ago for me as well. I just remember that I had some accessibility issues, and had to get someone to help me.

Sharon

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Wednesday, January 13, 2021 3:45 PM
To: main@jfw.groups.io
Subject: Re: bandcamp

 

It’s sadly been too long since I purchased a release with bandcamp (maybea  year, now, much to my chagrin), but I don’t remember any tricks. What sort of difficulties are you having?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sharon
Sent: January 13, 2021 10:52 AM
To: main@jfw.groups.io
Subject: bandcamp

 

Any tricks for purchasing music through them?

It seemed difficult with Jaws.

Sharon

5381 - 5400 of 90961