Date   
moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Glenn / Lenny
 

I wondered if that were the case.
How much does FS sell that for?

----- Original Message -----
From: "Abraham Sweiss" <abrahamsweiss8@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 10:50 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


The jaws remote desktop function does not require anyone to be at the other
computer.

Thanks,abraham

On Feb 27, 2020, at 9:11 PM, Glenn / Lenny <glennervin@...>
wrote:

what's the difference?

----- Original Message -----
From: "Abraham Sweiss" <abrahamsweiss8@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:06 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Is the question regarding tandem or the remote desktop option.

These are two different functions. The first one is included with bass
jaws,
the second one requires purchasing an additional license to support remote
desktop access.

Thanks,abraham

On Feb 27, 2020, at 8:05 PM, Glenn / Lenny <glennervin@...>
wrote:

Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from
work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile
settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up.
How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into
the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws
for
work.















moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Abraham Sweiss
 

The jaws remote desktop function does not require anyone to be at the other computer.

Thanks,abraham

On Feb 27, 2020, at 9:11 PM, Glenn / Lenny <glennervin@...> wrote:

what's the difference?

----- Original Message -----
From: "Abraham Sweiss" <abrahamsweiss8@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:06 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Is the question regarding tandem or the remote desktop option.

These are two different functions. The first one is included with bass jaws,
the second one requires purchasing an additional license to support remote
desktop access.

Thanks,abraham

On Feb 27, 2020, at 8:05 PM, Glenn / Lenny <glennervin@...>
wrote:

Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from
work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile
settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up.
How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws
for
work.















moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Glenn / Lenny
 

what's the difference?

----- Original Message -----
From: "Abraham Sweiss" <abrahamsweiss8@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:06 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Is the question regarding tandem or the remote desktop option.

These are two different functions. The first one is included with bass jaws,
the second one requires purchasing an additional license to support remote
desktop access.

Thanks,abraham

On Feb 27, 2020, at 8:05 PM, Glenn / Lenny <glennervin@...>
wrote:

Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from
work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote
jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile
settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up.
How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws
for
work.











moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Glenn / Lenny
 

Shannon,
I looked in the menu I mentioned to you before to connect the session, and I
was correct, I think you'll need the Tandem Direct option.
I've pasted the quick user guide for Jaws Tandem below, and it includes the
steps for the corporate environment connection, AKA, Tandem Direct:
Glenn
JAWS Tandem Quick Start Guide
Use JAWS Tandem™ to access another computer running JAWS to provide hands on
technical support, write scripts from a distance, or perform remote JAWS
training. This feature consists of a controller system, used by support
personnel, distributors, dealers, consultants, and trainers, and a target
system, which is the customer’s JAWS application and computer.

A JAWS Tandem connection serves as an online meeting between two JAWS users.
A meeting can be conducted over the Internet, which is known as a Tandem
Center session, or over a private network, known as a Tandem Direct session.
The primary connection method is through Tandem Center, a gateway server
responsible for creating meeting IDs, verifying proper use of JAWS Tandem,
and providing a path between the two systems. After the session is
established, the controller can manage and run the target system's desktop.

Tandem Center sessions on both the controller and target computers are free
of charge. For Tandem Direct sessions (typically used by corporations within
a network) there is a charge for any computer that acts as a controller such
as a help desk. There is no charge for target computers, such as
workstations, in a Tandem Direct session.

Remember to visit the Frequently Asked Questions for more information.

Verify the following before you begin:

a.. Internet access
b.. Windows 7 or later
c.. If you are having issues connecting to the Tandem Center, please make
sure that Internet address tandem.freedomscientific.com and port 12000 be
given access in the firewall. If you are in a corporate environment, please
contact your IT team with this information.
Starting a JAWS Tandem Center Session
Note: The controller user provides the target user with a meeting ID. The ID
is automatically generated for the controller during the connection process
as described in the following procedure.

To start a JAWS Tandem Center session on a controller computer, do the
following:

1.. Press INSERT+J to open the JAWS application window.
2.. Press ALT+U to open the Utilities menu.
3.. Select JAWS Tandem from this menu, and then select Tandem Center from
the next submenu.
4.. Select Get Access to a computer, which then opens the Get Access to a
Computer dialog box.
5.. Press SPACEBAR to activate the Get Access button.
The Meeting ID Created dialog box opens. An alphanumeric ID appears in the
Meeting ID read-only edit field. It is not case sensitive.
6.. Provide the target user with the meeting ID, and then wait for the
connection process to complete on the target system. After successful
connection with the target, you have access to the target system’s desktop.
Note that once an ID is generated, it is valid for 60 minutes until a
connection is made. If you have not made a connection within this period,
you must obtain a new ID from the Tandem Center.
Note: Instead of having the target user walk through similar menus, tell the
user to press INSERT+ALT+T. This will open the Allow Access to My Computer
dialog box, and place focus in the Meeting ID edit box. You can then give
the user the meeting ID that was created for you.

On the target computer, do the following:

1.. Press INSERT+ALT+T. The Allow Access to My Computer dialog box opens.
2.. Type the meeting ID into the edit box. The ID is not case sensitive.
3.. Press TAB, and then SPACEBAR to activate the Allow Access button.
After the controller and target successfully connect, the controller has
access to the target system's desktop.
Running a Session
As a controller, you can run the target system using JAWS and braille just
as if you are sitting in front of that computer. Use the same JAWS
keystrokes and functionality that you are familiar with to control the
target system. JAWS keystrokes work no matter which type of keyboard layout
is used: Laptop or Desktop.

JAWS Tandem Keystrokes
Note: When using the Laptop keyboard layout, substitute CAPS LOCK for INSERT
when typing a JAWS Tandem keystroke.

a.. INSERT+ALT+T – ends session and can be issued from controller or
target systems.
Note: You can also use this keystroke to start JAWS Tandem on a target
system.
b.. INSERT+ALT+TAB – suspends or resumes a JAWS Tandem session in order to
toggle between target system’s desktop and controller system’s desktop. Only
available on controller system; cannot be used by target system.
c.. INSERT+CTRL+SHIFT+V – toggles video on or off. Video is off by
default. When video is on, it lets sighted users watch JAWS Tandem activity.
Only available on controller system; cannot be used by target system.
Note: If JAWS is running with ZoomText or as Fusion, you must always use
INSERT+ALT+T to start or end a Tandem session even when using the Laptop
keyboard layout.

Remote Clipboard
Use the CTRL+C keystroke to copy text with formatting from the target
system, and then use CTRL+V to paste text into a file on the controller
system. This is ideal for support personnel who want to copy specific text
from a log file on the target system.

Note: Remote Clipboard will not transfer files.

Disconnecting a Session
Press INSERT+ALT+T to terminate a session at any time from either the
controller system or the target system. Each system regains control of its
own desktop.

Tandem Direct Session
A Tandem Direct session is used for enterprise networks in a business when
two JAWS users are connected to the same network. All functionality and
keystrokes previously mentioned for a Tandem Center session are applicable
for a Tandem Direct session.

Starting a Tandem Direct session is slightly different than a Tandem Center
session as outlined in the following list.

a.. Determine which computer will be the controller and which will be the
target.
b.. The first time you run a Tandem Direct session on a target system, you
must unblock the program JTTarget so that it can communicate through Windows
Firewall.
c.. The target system always initiates the session, and it must provide
its meeting ID and its host name to the controller.
d.. By default, the target system listens on port 3000. If you change the
port setting, remember to configure the controller system for the same port.
e.. The controller can turn on video to view JAWS Tandem activity.
Starting a JAWS Tandem Direct Session
A JAWS Tandem Direct session is always launched from the target computer. To
start, do the following:

1.. Press INSERT+J and then ALT+U to open the Utilities menu in the JAWS
application window.
2.. Press T to open the JAWS Tandem submenu, and then R to open the Tandem
Direct submenu.
3.. Press A to choose Allow Access to my Computer. A dialog box opens with
focus in the Meeting ID edit box.
4.. Type a value into the Meeting ID edit box. The Meeting ID can be
letters, numbers, or a combination of both. The maximum ID length is
64-characters, and it is not case sensitive. You will provide this ID to the
controller user.
5.. Press TAB to move to the Host Name or IP Address read-only edit box.
Provide the controller user with the host name, for example, ABC-DEF001.
6.. Press TAB to move to the Allow Access button, and press SPACEBAR to
activate the button.
Note: As a target system, a Windows Security Alert dialog box may appear
after pressing the Allow Access button. If this happens, choose the Unblock
button and press SPACEBAR. (If a User Account Control dialog box opens,
choose the Continue button and press SPACEBAR.) This action adds the
JTTarget program to an exceptions list in Windows Firewall on the target
system.

7.. Wait for the controller user to enter the target information. On a
successful Tandem Direct connection, JAWS announces Tandem connection open.
The controller system now has access to and can operate the target system.
To start a JAWS Tandem Direct session on the controller computer, do the
following:

1.. Press INSERT+J to open the JAWS application window, and press ALT+U to
open the Utilities menu.
2.. Press T to open the JAWS Tandem submenu, and then R to open the Tandem
Direct submenu.
3.. Press G to select Get Access to a Computer. A dialog box opens, and
focus is in the Host Name or IP Address edit box.
4.. Type the host name, provided to you by the target user, into the edit
box.
5.. Press TAB to move to the Meeting ID edit box, and type the ID provided
by the target user.
6.. Press TAB to move to the Enable Video check box. If you are a sighted
user and want to watch the JAWS Tandem activity on the target system, select
the check box. If you do not need video, clear the check box.
Note: By default, the Enable Video check box is cleared; however, if you
selected the check box in a previous session, JAWS Tandem remembers this
setting and uses it for the next session. Also, video can be toggled on or
off at any time during a session using INSERT+CTRL+SHIFT+V.

7.. Press TAB to move to the Get Access button and press SPACEBAR to
activate the button. After successfully connecting with the target, you now
have control of the target system’s desktop. If the connection fails, verify
that Windows Firewall is not blocking JTTarget on the target system. Also
verify that host name, meeting ID, and port settings match.
Configuring Windows Firewall for Tandem Direct Sessions
Note: The following procedures are only necessary if JTTarget is later
blocked on the target system.

The target system uses a program named JTTarget. It must be added to an
exceptions list on the target system so that the program can communicate
through Windows Firewall. (It is not necessary to do this on the controller
system.) Windows lets you unblock this program when you first create a
Tandem Direct session. Later, if you block the program by deleting JTTarget
from the Windows Firewall exceptions list or by clearing the JTTarget check
box in the exceptions list, an error message or a Windows Security Alert
will appear the next time the target and controller try to connect.

Adding JTTarget to the Exceptions List
If you previously deleted the JTTarget program from the exceptions list in
Windows Firewall, use the following steps to add the program:

1.. Open the Windows Control Panel and then select and open Windows
Firewall.
2.. For Windows 10 or Windows 8.1, navigate to and select the Allow an app
or feature through Windows Firewall link, or for Windows 7, navigate to and
select the Allow a program through Windows Firewall link. If a User Account
Control dialog box opens, choose the Continue button and press SPACEBAR to
activate the button.
3.. Select Change Settings and then select the Allow Another App button.
4.. Choose the Browse button in the Add a Program dialog box, and then
type JTTarget.exe in the File name combo of the Browse dialog box.
5.. Press ENTER. The program is added to the Programs list in the Add a
Program dialog box.
6.. Choose OK. JTTarget is added to and selected in the Allowed Programs
list.
7.. Press TAB to move to the OK button and press SPACEBAR to save the
change and close Windows Firewall. The controller system can now connect to
the target system.
Windows Firewall Exception for Tandem Direct
If you previously cleared the JTTarget check box in the exceptions list, do
the following to select the check box:

1.. Open the Windows Control Panel and then select and open Windows
Firewall.
2.. For Windows 10 or Windows 8.1, navigate to and select the Allow an app
or feature through Windows Firewall link, or for Windows 7, navigate to and
select the Allow a program through Windows Firewall link. If a User Account
Control dialog box opens, choose the Continue button and press SPACEBAR to
activate the button.
3.. Select Change Settings and then select the Allow Another App button.
4.. In the Allowed Programs list, use the ARROW keys to move to JTTarget.
5.. Press SPACEBAR to select the check box.
6.. Press TAB to move to the OK button and press SPACEBAR to save the
change and close Windows Firewall. The controller system can now connect to
the target system.
Connection Audit Logging
JAWS Tandem now maintains a log of session activity using the Windows Event
Log service. These events are used to record the beginning and end of a
session, the suspension and continuation of a session, and errors triggered
before a session starts. The advantage of having such a log is that
consultants and trainers now have a record of JAWS Tandem activity which is
useful for tracking time for billing purposes and so on. The event log can
be set up so that only administrators can delete events. Also, users
assigned any privilege level can write events to the event log.

Note: JAWS Tandem event logging does not record user activity. It only logs
session errors and the start, suspension, restart, and end of a session.

a.. To learn more about events, see JAWS Tandem Events.
b.. To learn more about the event properties, see JAWS Tandem Event
Properties.
c.. To launch the Event Viewer, see Opening the Event Viewer.
JAWS Tandem Events
JAWS Tandem events and actions trigger an entry in the event log. The
following events are available. For event details, see Event Properties.

a.. Event ID 1 – Tandem session error: An error event describing when a
session cannot be established. This can be caused by the following:
a.. Meeting ID used by the target does not match the meeting ID used by
the controller.
b.. Target and controller are unable to find a common voice synthesizer.
c.. Meeting ID expired.
d.. Network error occurred; can be caused by the target computer not
communicating with the Tandem Center.
b.. Event ID 2 – Tandem session started: An information event showing when
a session is established between a controller and target computer. It
appears in both the controller and target event logs.
c.. Event ID 3 – Tandem session concluded: An information event showing
when a session ended. This can be caused by the target or controller
computer closing the session, or by a network error closing the session. It
appears in both the controller and target event logs.
d.. Event ID 4 – Tandem session suspended: An information event showing
when the controller suspended a session. This is done by toggling between
the target system desktop and the controller system desktop using
INSERT+ALT+TAB. It appears in the target event log.
e.. Event ID 5 – Tandem session resumed: An information event showing when
the controller resumed the session. This is done by toggling between the
controller system desktop and the target system desktop using
INSERT+ALT+TAB. It appears in the target event log.

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 7:35 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Hope that instruction is outlined for dummies in the help menus?😉😊
On Feb 27, 2020, at 7:31 PM, Glenn / Lenny <glennervin@...>
wrote:
Once you have taken control of a computer, it is just like being on the
other computer.
There is a keyboard shortcut to toggle back and forth with Jaws Tandem as
well, but I don't recall what it is.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 7:24 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Ok, thanks again Glen.
I’ll take the laptop tomorrow and look at that setting. Are commands to use
the remote copy of jaws the normal commands?
On Feb 27, 2020, at 7:05 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws for
work.



moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Abraham Sweiss
 

Is the question regarding tandem or the remote desktop option.

These are two different functions. The first one is included with bass jaws, the second one requires purchasing an additional license to support remote desktop access.

Thanks,abraham

On Feb 27, 2020, at 8:05 PM, Glenn / Lenny <glennervin@...> wrote:

Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws for
work.











moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Shannon
 

Hope that instruction is outlined for dummies in the help menus?😉😊
On Feb 27, 2020, at 7:31 PM, Glenn / Lenny <glennervin@...> wrote:
Once you have taken control of a computer, it is just like being on the
other computer.
There is a keyboard shortcut to toggle back and forth with Jaws Tandem as
well, but I don't recall what it is.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 7:24 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Ok, thanks again Glen.
I’ll take the laptop tomorrow and look at that setting. Are commands to use
the remote copy of jaws the normal commands?
On Feb 27, 2020, at 7:05 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws for
work.



moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Glenn / Lenny
 

Once you have taken control of a computer, it is just like being on the
other computer.
There is a keyboard shortcut to toggle back and forth with Jaws Tandem as
well, but I don't recall what it is.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 7:24 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Ok, thanks again Glen.
I’ll take the laptop tomorrow and look at that setting. Are commands to use
the remote copy of jaws the normal commands?
On Feb 27, 2020, at 7:05 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws for
work.



moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Shannon
 

NVDA won’t work because it has problems with the programs for accounting and time collection.
On Feb 27, 2020, at 7:06 PM, Glenn / Lenny <glennervin@...> wrote:
You might find NVDA's Remote Access easier.
Once connected, you toggle between the computers with F11.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws for
work.



moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Shannon
 

Ok, thanks again Glen.
I’ll take the laptop tomorrow and look at that setting. Are commands to use the remote copy of jaws the normal commands?
On Feb 27, 2020, at 7:05 PM, Glenn / Lenny <glennervin@...> wrote:
Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from work
first.
HTH.
Glenn
----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws for
work.



moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Glenn / Lenny
 

You might find NVDA's Remote Access easier.
Once connected, you toggle between the computers with F11.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws for
work.



moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Glenn / Lenny
 

Hi Shannon,
I think it is the Tandem Direct in utilities.
The menu says
Tandem Direct submenu
And down arrow there.
I have done tandem regular to help folks quite a few times before, but I
have not tried Tandem direct.
I noticed that get access to a computer is not available on mine for some
reason.
But at any rate, I think you will need to initiate the connection from work
first.
HTH.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 6:58 PM
Subject: Re: Need step by instructions for setting up and useing remote jaws
for work.


Hello Glenn, and thanks for the reminder. Both copies are the same year.
Version number I mean. But I would want to copy at my work profile settings.
I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How
do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...>
wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail
the file to your work, or bring it on a thumb drive and import it into the
other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws for
work.



moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Shannon
 

Hello Glenn, and thanks for the reminder. Both copies are the same year. Version number I mean. But I would want to copy at my work profile settings. I didn’t think of that.
That part I think I know how to do. Import new settings for my back up. How do I use remote control? Do you know?
On Feb 27, 2020, at 6:49 PM, Glenn / Lenny <glennervin@...> wrote:
Hi,
If you have exported your settings to a jaws settings file, you can eMail the file to your work, or bring it on a thumb drive and import it into the other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn
----- Original Message ----- From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws for work.



moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Shannon
 

My apologies to all I did not mean to hit send with a blank body on my message.
In light of the news, and warnings to work from home. I need to make sure that I am prepared. I am working with windows 10 and jaws 2020. I have purchased the remote license but I’ve never used it. Can anyone give me instructions on how to connect my two units, and how to use jaws through the remote access?
Any assistance is really appreciate it. Thank you
Shannon
On Feb 27, 2020, at 6:46 PM, Shannon <shannon@...> wrote:


moderated Re: Need step by instructions for setting up and useing remote jaws for work.

Glenn / Lenny
 

Hi,
If you have exported your settings to a jaws settings file, you can eMail the file to your work, or bring it on a thumb drive and import it into the other Jaws.
Unless the Jaws at work is older than the Jaws you are currently using.
Glenn

----- Original Message -----
From: "Shannon" <shannon@...>
To: <jfw@groups.io>
Sent: Thursday, February 27, 2020 6:46 PM
Subject: Need step by instructions for setting up and useing remote jaws for work.




moderated Need step by instructions for setting up and useing remote jaws for work.

Shannon
 

moderated Re: Microsoft Excel And Filters

Van Lant, Robin
 

Yes.  You’ll want to leave the Select All option checked and arrow down to the last in the list below it, which is “(blanks)” and uncheck that.  Wish there was a quicker way to get to it, but arrowing down is the only way I’ve found.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Hicks Steven (CORNWALL IT SERVICES) via Groups.Io
Sent: Thursday, February 27, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: Microsoft Excel And Filters

 

Thanks so much, that is fantastic!

What I have is a colum going down, I just want to filter that colum so the blank cells are filtered out and the column only lists the cells where the entry is not blank e.g. contains a number.

I Think that it is the alt+down arrow that I could have been missing.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: 27 February 2020 17:36
To: main@jfw.groups.io
Subject: Re: Microsoft Excel And Filters

 

I use filters a lot.

 

Go to a cell in your header row, then hit the Filter button on the Data ribbon to turn on filters for that entire row of headers.

When you want to filter a particular column, go do that column header and hit alt down arrow to expand the filter choices.

I’m usually filtering on txt in the cells.  The easiest way I find to do this is to Shift tab back three times till I hear Select all.  You’ll be passing over a cancel button and an OK button. 

Then you arrow down the list of options, checking an unchecking the boxes you want to see or hide.  Annoyingly I cannot find a way to page down or use first letter navigation to quickly move through a long list. 

If you know you want to see most of the rows, but hide just a few, leave the Select All option at the top check and arrow down to find the few options you want to filter out.

If you want to hide a majority of rows and only see certain items, then uncheck the Select All option at the top and move down to place a check in the text items you want.

Once you have that done, you just tab once to the OK  button and hit enter. .JAWS does not read this button clearly; it sounds something more like type the text you want OK. 

 

Happy to talk more if you have specific questions as you try it.   

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Hicks Steven (CORNWALL IT SERVICES) via Groups.Io
Sent: Thursday, February 27, 2020 3:14 AM
To: main@jfw.groups.io
Subject: Microsoft Excel And Filters

 

Hi,

 

Has anyone managed to work out how to use filters with Microsoft excel and JAWS?

 



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail

moderated Re: Microsoft Excel And Filters

Hicks Steven (CORNWALL IT SERVICES)
 

Thanks so much, that is fantastic!

What I have is a colum going down, I just want to filter that colum so the blank cells are filtered out and the column only lists the cells where the entry is not blank e.g. contains a number.

I Think that it is the alt+down arrow that I could have been missing.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: 27 February 2020 17:36
To: main@jfw.groups.io
Subject: Re: Microsoft Excel And Filters

 

I use filters a lot.

 

Go to a cell in your header row, then hit the Filter button on the Data ribbon to turn on filters for that entire row of headers.

When you want to filter a particular column, go do that column header and hit alt down arrow to expand the filter choices.

I’m usually filtering on txt in the cells.  The easiest way I find to do this is to Shift tab back three times till I hear Select all.  You’ll be passing over a cancel button and an OK button. 

Then you arrow down the list of options, checking an unchecking the boxes you want to see or hide.  Annoyingly I cannot find a way to page down or use first letter navigation to quickly move through a long list. 

If you know you want to see most of the rows, but hide just a few, leave the Select All option at the top check and arrow down to find the few options you want to filter out.

If you want to hide a majority of rows and only see certain items, then uncheck the Select All option at the top and move down to place a check in the text items you want.

Once you have that done, you just tab once to the OK  button and hit enter. .JAWS does not read this button clearly; it sounds something more like type the text you want OK. 

 

Happy to talk more if you have specific questions as you try it.   

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Hicks Steven (CORNWALL IT SERVICES) via Groups.Io
Sent: Thursday, February 27, 2020 3:14 AM
To: main@jfw.groups.io
Subject: Microsoft Excel And Filters

 

Hi,

 

Has anyone managed to work out how to use filters with Microsoft excel and JAWS?

 



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail

moderated Re: focus 40 blue and BARD

Ashleigh Piccinino
 

What about saving the brf file, putting it on your Braille display in the books folder of Scratchpad, and reading it that way? From what I’ve seen—I have a Focus 40 Blue as well—Scratchpad keeps your last location even if you close application and/or the books portion.

Hope this helps,

Ashleigh Piccinino

 

Sent from Mail for Windows 10

 

From: Kimber Gardner
Sent: Thursday, February 27, 2020 8:43 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

 

Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach is
you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the words
stopped reading here. That way when you open the book again you will
be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
> Good Evening
>
>
>
>                Can someone elighten me on how to use a braille display with
> a downloaded bARD book? I downloaded it and the file is there but I'll be
> darned if I know how to open it so I can read. Thanks for all the help from
> all you experts out here.
>
>
>
> Marlo from california
>
>
>
>
>


--
Kimberly

 

moderated Re: Jaws2019 Time table in email and microsoft word document

Mario
 

when you need to copy more than one block of text in succession either from the same source or completely different sources, you can select and copy the first block by pressing control+c, and then append to it by selecting the second, third, fourth, etc. block and pressing insert+windows+c.

but if you select and copy the first block with control+c, and then select and copy the second, third, fourth, etc. block of text with control+c, the first block will be lost because it will be overwritten by the second,third, fourth, etc. block.

the reason I mentioned pasting the first block into a notepad document was that if you weren't aware of the append command and used control+c to copy the second block, you would not have lost the first block because it would have been pasted in a notepad document.

hope this makes sense to you. if not, maybe someone can explain it better. but if you already know about the append command, just ignore what I tried to explain.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Wednesday, February 26, 2020, 7:42 PM
Subject: Jaws2019 Time table in email and microsoft word document
When you mention about copy selected on first one and then I have to wait for second copy to put in notepad ?


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, February 26, 2020 7:33 PM
To: main@jfw.groups.io
Subject: Re: Jaws2019 Time table in email and microsoft word document

what are you confused about?

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Wednesday, February 26, 2020, 5:46 PM
Subject: Jaws2019 Time table in email and microsoft word document
Mario I'm a little confused here.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, February 26, 2020 3:54 PM
To: main@jfw.groups.io
Subject: Re: Jaws2019 Time table in email and microsoft word document

yes. after pressing insert+spacebar and then h, you can select and copy
what JAWS has said in either Outlook and Word.

when you copy the first selection to the clipboard, you can continue to
append the second selection by pressing insert+windows+c. this way you
don't have to paste to something like notepad before copying the second
selection, because if you don't paste the contents of the clipboard to
something like notepad before copying the second selection, you'll lose
(overwrite) the first copied selection. if you already know this, please
ignore it as I don't want to confuse you.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Wednesday, February 26, 2020, 1:56 PM
Subject: Jaws2019 Time table in email and microsoft word document
Hi Mario If I'm in email and hen I reply back to message if I hear it's
say time table or out table then it's say edit Do I press insert +
spacebar then letter h ? If I'm opens microsoft word 2007 document and
hear its say time table do the same things by press insert + spacebar h ?


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Wednesday, February 26, 2020 1:23 PM
To: main@jfw.groups.io
Subject: Re: Jaws2019 Time table in email and microsoft word document

press insert+spacebar and then h. the last 50 items that JAWS spoke last
will show up. then you can select and copy from it as if it were a
document. when you're finished using it, just press the escape key to
return to the program you were in before using the speech history.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Wednesday, February 26, 2020, 12:11 PM
Subject: Jaws2019 Time table in email and microsoft word document
Sieghard Nope I haven't gone on to jaws script history ,how do I do
that?

Addison

*From:*main@jfw.groups.io [mailto:main@jfw.groups.io] *On Behalf Of
*Sieghard Weitzel
*Sent:* Wednesday, February 26, 2020 10:59 AM
*To:* main@jfw.groups.io
*Subject:* Re: Jaws2019 Time table in email and microsoft word document

Have you gone into Jaws speech history right after you heard this to
make sure Jaws really says "time table" and not something else which
sounds like it?

For me in Outlook Jaws simply says "edit" and in Word after I open a new

Word document it says "print, edit" which means it's set to the "print
view".

*From:* main@jfw.groups.io <main@jfw.groups.io> *On Behalf Of *O.Addison
Gethers
*Sent:* Wednesday, February 26, 2020 7:32 AM
*To:* jfw@groups.io
*Subject:* Jaws2019 Time table in email and microsoft word document

Hello All I hope I can make some understanding in here,I have jaws2019
with desktop computer window10 !! Whenever I go on email to reply back
to the message I hear jaws say time table edit so I type a message
then send email Then when I opens microsoft word document when it open
it's say time table edit so I can type in the document or paste
something in document !! Why is time table have something to do with
email and document ? Is there a way to get rid off time table ?

Addison

so









.








.








.

moderated ert table with in Google dock

Michael Munn
 

hi all, this is michael here and I have a question on inserting table with in Google dock. I'm making a schedule for someone and I need step by step instruction on how to insert a table.

Can some one provide step by step instruction with this regard please.

Thanks a lot.

Best regards

michael munn