Date   
moderated Re: focus 40 blue and BARD

Milton Ota
 

Hello All:

I took a look at my SD card on my Focus 40 Blu 5th Generation and I could not find the "Book" folder where people have been saying to put "BRF" files..

Can someone tell me if that folder is created automatically or do I have to create the folder on the SD card on the Focus?

Thanks in advance for all your help.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ashleigh Piccinino
Sent: Saturday, February 29, 2020 1:54 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Hello,
I think you go into your bookshelf on the BARDmobile app, look for the Braille book you want (this’ll b under th Braille books item in the library tab), and open the book. I haven’t worked with this much, but I think you need to next press m on your display to get to the beginning of your first volume of the book. Don’t hesitate to go to the help file on BARDmobile for more assistance. If you’d like, download the brf file into your computer, open up your focus drive—kinda hard to do but plug in the Focus while, at the same time pressing left pan and power at the same time. After that, navigate to your books in the scratchpad, paste the copied brf in, and make sure to close that and remove Focus with eject/safely remove hardware. After that, note that the brf is there in the books section of scratchpad and read that way. In that way, the display keeps your position/not sure ot would with BARDmobile.
Ashleigh Piccinino
On Feb 27, 2020, at 9:25 AM, Bill Tessore <billtessore@...> wrote:

Oops! I misread the original subject line. Never mind!

Shalom,

B ill Tessore
billtessore@...
On Feb 27, 2020, at 7:15 AM, Bill Tessore via Groups.Io <billtessore=gmail.com@groups.io> wrote:

Richard, I was not aware the El Braille had a Rotor, I thought that
was a function of devices like smart phones and tablets. I was under
the impression that this is something that the El Braille Does not
have because it has no view screen. Is there something I don’t know
about the El Braille? shalom, Bill Tesser billtessore@...
On Feb 27, 2020, at 6:49 AM, Richard Turner <richardturner42@...> wrote:
Open the BARD help file in the app and read section 7. You can navigate by headings using the VoiceOver rotor.


Richard

🖖 Live long and prosper


Check out my web site at:
https://eur05.safelinks.protection.outlook.com/?url=www.turner42.com
&amp;data=02%7C01%7C%7Ca79b6cc86f1347ac5c5208d7bb99521f%7C84df9e7fe9
f640afb435aaaaaaaaaaaa%7C1%7C0%7C637184139482800809&amp;sdata=4tXooC
G%2BPPbDMRxbmLoWh59LN1TD%2FjpzPHQFXXs1bSU%3D&amp;reserved=0

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimber
Gardner
Sent: Thursday, February 27, 2020 6:44 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Hi,

I would open the file with wordpad and silence the synth so it isn't blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach is you won't be able to mark your place unless you actually insert something into the file. I used to write three asterisks and the words stopped reading here. That way when you open the book again you will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille display
with a downloaded bARD book? I downloaded it and the file is there
but I'll be darned if I know how to open it so I can read. Thanks
for all the help from all you experts out here.



Marlo from california





--
Kimberly







moderated Re: Newbie to SAP, difficulty while using with JAWS 2020.

Adriani Botez
 

Have you enabled allow scripting in accessibility settings? Note that if your SAP environment work with a server/client connection, the administrators must allow scripting on the servers as well. Not only on the client.

 

Best regards

Adriani

 

 

Von: main@jfw.groups.io <main@jfw.groups.io> Im Auftrag von muhammadBilal Arshad
Gesendet: Samstag, 29. Februar 2020 10:51
An: main@jfw.groups.io
Betreff: Newbie to SAP, difficulty while using with JAWS 2020.

 

Greetings to all members…
                           Recently I start working for an accounts office, where most of the day to day business transactions are performed in SAP. For instance, generating pay slips of employees, collecting/sending tax receipts etc.

As per the SAP manual, I configure the accessibility options, screenreader extension is installed, scripting is enable, and using the classic theme. But still JAWS is not supporting with this software.

Although at initial connection setup and log in screen, JAWS works well, yet after logging in it almost stop supporting the application.

For instance, If I open a new document, JAWS cannot read anything with pc cursor. I have to use the jaws cursor all the times. Not only this, even in tables, it cannot read out, in which cell (row/column) currently I’m in, and its headers. And it makes inputting the data into tables almost impossible.

I would like to ask from you that is there any special configuration which I might be missing? I heard that SAP is accessible with JAWS, so there is must be some issue with my installation or with the configuration.

I’m using the SAPGUI 7.4 and the JAWS 2020 Feb release.

Any help from the experienced SAP user or from anyone is appreciated in advance.

Sincerely.

moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Glenn then what other suggestion I have ?
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn / Lenny
Sent: Friday, February 28, 2020 9:36 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I'm not sure if Adobe will read data base files. But if it does, I'd
suggest that it's not the best choice for accessing such files.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 8:31 PM
Subject: Re: : Com Pilot instructions


Hi Glenn Well I opens the document then wait for 1 or 2 minute adobe
reader didn't appear on there where I would hear it's say adobe reader left
to right something so I can press enter on it


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 8:43 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Addison,
That sounds like it would be best for PDF files, not the type you want to
access.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 7:31 PM
Subject: Re: : Com Pilot instructions


Glenn I do have adobe reader


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.

moderated Re: focus 40 blue and BARD

Richard Turner
 

The address to write to for this group is:
main@jfw.groups.io


Richard
"There's a nap for that." -- an anonymous cat

Sent from my iPhone SE

On Feb 29, 2020, at 2:29 AM, Anna Givens <annajee82@...> wrote:

Hey folks. I’m really sorry to post this question on this thread. But my messages only seem to go through when I reply to something. I am trying to send a message to ask a question and start a new topic. What is the email address I send it to?
Sorry for interrupting this thread...

Thanks

On Feb 28, 2020, at 9:43 PM, Chris Hill <hillco@...> wrote:


2. Press and hold the Left Panning button while simultaneously powering on the display. Connect the Focus to your computer using the supplied USB cable,
and the display will be recognized as a removable USB drive.


No, you cannot download a book from the iphone to the braille display. Maybe some day they will write an app for such, that's what it would take.



On 2/28/2020 19:43, Marlo Green wrote:
Yes, I have heard there was a key combination to show the braile display as a drive, do you know what the combination is?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Friday, February 28, 2020 5:39 PM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

As long as you put it in the booksfolder. No reason to pull the card, though; there is a keyboard combination you can use while you turn on the display to have it seen as an external drive. That litttle card isn't all that easy to deal with directly.



On 2/28/2020 18:51, Marlo Green wrote:
Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn /
Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach
is you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the
words stopped reading here. That way when you open the book again you
will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file is
there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california




--
Kimberly











moderated Newbie to SAP, difficulty while using with JAWS 2020.

muhammadBilal Arshad
 

Greetings to all members…
                                Recently I start working for an accounts office, where most of the day to day business transactions are performed in SAP. For instance, generating pay slips of employees, collecting/sending tax receipts etc.

As per the SAP manual, I configure the accessibility options, screenreader extension is installed, scripting is enable, and using the classic theme. But still JAWS is not supporting with this software.

Although at initial connection setup and log in screen, JAWS works well, yet after logging in it almost stop supporting the application.

For instance, If I open a new document, JAWS cannot read anything with pc cursor. I have to use the jaws cursor all the times. Not only this, even in tables, it cannot read out, in which cell (row/column) currently I’m in, and its headers. And it makes inputting the data into tables almost impossible.

I would like to ask from you that is there any special configuration which I might be missing? I heard that SAP is accessible with JAWS, so there is must be some issue with my installation or with the configuration.

I’m using the SAPGUI 7.4 and the JAWS 2020 Feb release.

Any help from the experienced SAP user or from anyone is appreciated in advance.

Sincerely.

moderated Re: focus 40 blue and BARD

Anna Givens
 

Hey folks. I’m really sorry to post this question on this thread. But my messages only seem to go through when I reply to something. I am trying to send a message to ask a question and start a new topic. What is the email address I send it to?
Sorry for interrupting this thread...

Thanks

On Feb 28, 2020, at 9:43 PM, Chris Hill <hillco@...> wrote:


2. Press and hold the Left Panning button while simultaneously powering on the display. Connect the Focus to your computer using the supplied USB cable,
and the display will be recognized as a removable USB drive.


No, you cannot download a book from the iphone to the braille display. Maybe some day they will write an app for such, that's what it would take.



On 2/28/2020 19:43, Marlo Green wrote:
Yes, I have heard there was a key combination to show the braile display as a drive, do you know what the combination is?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Friday, February 28, 2020 5:39 PM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

As long as you put it in the booksfolder. No reason to pull the card, though; there is a keyboard combination you can use while you turn on the display to have it seen as an external drive. That litttle card isn't all that easy to deal with directly.



On 2/28/2020 18:51, Marlo Green wrote:
Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn /
Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach
is you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the
words stopped reading here. That way when you open the book again you
will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file is
there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california




--
Kimberly










moderated Re: does jfw work very well with firefox?

Hank William Merchant
 

   
Hello Glen,
 
Thanks for your email reply. What version are you using of Jaws with firefox?I have heard that when you are first setting up firefox that you need to first create a account in firefox and that each time after that when you go on the internet with your setup firefox that you need to sign into your firefox account to be able to do anything you want to do on the internet using your setup firefox browser. Can you maybe please tell me if this is the case that you first need to create a acount in firefox and then need to sign into this firefox account each time you open firefox to be able to successfully do anything on the internet? Any help that maybe you can give me on this would be very much appreciated. Much thanks in advance for any help with this.
 
 
 
 
 
 
All the best,
 
Jaws18 user Hank
 
 

From: Glenn / Lenny
Sent: Friday, February 28, 2020 2:43 PM
To: main@jfw.groups.io
Subject: Re: does jfw work very well with firefox?
 
Works fine.
 
----- Original Message -----
From: Hank William Merchant
To: main@jfw.groups.io
Sent: Thursday, February 27, 2020 6:34 PM
Subject: does jfw work very well with firefox?
 
 
Hello,
 
I am still using Jfw 18, can someone maybe please let me know if jfw works very well or maybe not with firefox? Do I maybe need to install jfw scripts before I am able to use jfw with firefox? Thanks in advance for any help I can get with this.
 
 
 
 
 
 
 
All the best,
 
Hank
 
 
 
 

moderated Re: focus 40 blue and BARD

Ashleigh Piccinino
 

Hello,
I think you go into your bookshelf on the BARDmobile app, look for the Braille book you want (this’ll b under th Braille books item in the library tab), and open the book. I haven’t worked with this much, but I think you need to next press m on your display to get to the beginning of your first volume of the book. Don’t hesitate to go to the help file on BARDmobile for more assistance. If you’d like, download the brf file into your computer, open up your focus drive—kinda hard to do but plug in the Focus while, at the same time pressing left pan and power at the same time. After that, navigate to your books in the scratchpad, paste the copied brf in, and make sure to close that and remove Focus with eject/safely remove hardware. After that, note that the brf is there in the books section of scratchpad and read that way. In that way, the display keeps your position/not sure ot would with BARDmobile.
Ashleigh Piccinino

On Feb 27, 2020, at 9:25 AM, Bill Tessore <billtessore@...> wrote:

Oops! I misread the original subject line. Never mind!

Shalom,

B ill Tessore
billtessore@...
On Feb 27, 2020, at 7:15 AM, Bill Tessore via Groups.Io <billtessore=gmail.com@groups.io> wrote:

Richard, I was not aware the El Braille had a Rotor, I thought that was a function of devices like smart phones and tablets. I was under the impression that this is something that the El Braille Does not have because it has no view screen. Is there something I don’t know about the El Braille? shalom,
Bill Tesser
billtessore@...
On Feb 27, 2020, at 6:49 AM, Richard Turner <richardturner42@...> wrote:
Open the BARD help file in the app and read section 7. You can navigate by headings using the VoiceOver rotor.


Richard

🖖 Live long and prosper


Check out my web site at: https://eur05.safelinks.protection.outlook.com/?url=www.turner42.com&amp;data=02%7C01%7C%7Ca79b6cc86f1347ac5c5208d7bb99521f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637184139482800809&amp;sdata=4tXooCG%2BPPbDMRxbmLoWh59LN1TD%2FjpzPHQFXXs1bSU%3D&amp;reserved=0

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Kimber Gardner
Sent: Thursday, February 27, 2020 6:44 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Hi,

I would open the file with wordpad and silence the synth so it isn't blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach is you won't be able to mark your place unless you actually insert something into the file. I used to write three asterisks and the words stopped reading here. That way when you open the book again you will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille display
with a downloaded bARD book? I downloaded it and the file is there but
I'll be darned if I know how to open it so I can read. Thanks for all
the help from all you experts out here.



Marlo from california





--
Kimberly







moderated Re: focus 40 blue and BARD

Marlo Green
 

Thank you so much, I got it an it works!

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Friday, February 28, 2020 6:43 PM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD


2. Press and hold the Left Panning button while simultaneously powering on the display. Connect the Focus to your computer using the supplied USB cable, and the display will be recognized as a removable USB drive.


No, you cannot download a book from the iphone to the braille display. Maybe some day they will write an app for such, that's what it would take.



On 2/28/2020 19:43, Marlo Green wrote:
Yes, I have heard there was a key combination to show the braile display as a drive, do you know what the combination is?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Friday, February 28, 2020 5:39 PM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

As long as you put it in the booksfolder. No reason to pull the card, though; there is a keyboard combination you can use while you turn on the display to have it seen as an external drive. That litttle card isn't all that easy to deal with directly.



On 2/28/2020 18:51, Marlo Green wrote:
Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn /
Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach
is you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the
words stopped reading here. That way when you open the book again
you will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file
is there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california




--
Kimberly










moderated Re: focus 40 blue and BARD

Chris Hill
 

2. Press and hold the Left Panning  button while simultaneously powering on the display. Connect the Focus to your computer using the supplied USB cable,
and the display will be recognized as a removable USB drive.


No, you cannot download a book from the iphone to the braille display.  Maybe some day they will write an app for such, that's what it would take.

On 2/28/2020 19:43, Marlo Green wrote:
Yes, I have heard there was a key combination to show the braile display as a drive, do you know what the combination is?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Friday, February 28, 2020 5:39 PM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

As long as you put it in the booksfolder. No reason to pull the card, though; there is a keyboard combination you can use while you turn on the display to have it seen as an external drive. That litttle card isn't all that easy to deal with directly.



On 2/28/2020 18:51, Marlo Green wrote:
Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn /
Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach
is you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the
words stopped reading here. That way when you open the book again you
will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file is
there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california




--
Kimberly









moderated Re: : Com Pilot instructions

Glenn / Lenny
 

I'm not sure if Adobe will read data base files. But if it does, I'd
suggest that it's not the best choice for accessing such files.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 8:31 PM
Subject: Re: : Com Pilot instructions


Hi Glenn Well I opens the document then wait for 1 or 2 minute adobe
reader didn't appear on there where I would hear it's say adobe reader left
to right something so I can press enter on it


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 8:43 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Addison,
That sounds like it would be best for PDF files, not the type you want to
access.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 7:31 PM
Subject: Re: : Com Pilot instructions


Glenn I do have adobe reader


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.

moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Hi Glenn Well I opens the document then wait for 1 or 2 minute adobe reader didn't appear on there where I would hear it's say adobe reader left to right something so I can press enter on it

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn / Lenny
Sent: Friday, February 28, 2020 8:43 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Addison,
That sounds like it would be best for PDF files, not the type you want to
access.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 7:31 PM
Subject: Re: : Com Pilot instructions


Glenn I do have adobe reader


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.

moderated Re: focus 40 blue and BARD

Marlo Green
 

Another question about the key combination, can I download it from the iPhone to the braille display in this manner?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Friday, February 28, 2020 5:39 PM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

As long as you put it in the booksfolder. No reason to pull the card, though; there is a keyboard combination you can use while you turn on the display to have it seen as an external drive. That litttle card isn't all that easy to deal with directly.



On 2/28/2020 18:51, Marlo Green wrote:
Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn /
Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach
is you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the
words stopped reading here. That way when you open the book again you
will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file is
there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california




--
Kimberly







moderated Re: focus 40 blue and BARD

Marlo Green
 

Yes, I have heard there was a key combination to show the braile display as a drive, do you know what the combination is?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Chris Hill
Sent: Friday, February 28, 2020 5:39 PM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

As long as you put it in the booksfolder. No reason to pull the card, though; there is a keyboard combination you can use while you turn on the display to have it seen as an external drive. That litttle card isn't all that easy to deal with directly.



On 2/28/2020 18:51, Marlo Green wrote:
Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn /
Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach
is you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the
words stopped reading here. That way when you open the book again you
will be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file is
there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california




--
Kimberly







moderated Re: : Com Pilot instructions

Glenn / Lenny
 

Hi Addison,
That sounds like it would be best for PDF files, not the type you want to
access.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 7:31 PM
Subject: Re: : Com Pilot instructions


Glenn I do have adobe reader


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.

moderated Re: focus 40 blue and BARD

Chris Hill
 

As long as you put it in the booksfolder.  No reason to pull the card, though; there is a keyboard combination you can use while you turn on the display to have it seen as an external drive. That litttle card isn't all that easy to deal with directly.

On 2/28/2020 18:51, Marlo Green wrote:
Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach is
you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the words
stopped reading here. That way when you open the book again you will
be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file is
there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california




--
Kimberly






moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Glenn I do have adobe reader

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn / Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.

moderated Re: : Com Pilot instructions

O.Addison Gethers
 

OK Mario !! When I went back open the dbf file in attachment I press alt + p for print then the dialogue box open so I arrow up once intefro printer then press enter then I wait so it was scan into openbook then it was downloaded then jaws say please wait then a message came up to say call freedom scientific something ok button

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 5:15 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

if it does print something, it will be at the least gibberish because it
is not an image of text or is a document.
.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in
here,I was wondered if it's possible for me to try to used printer info
to scan with openbooks !! Do you think that might works? I'm going to
try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format
which holds tectual information. it isn't graphical nore is it a
document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction
Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's
OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is
dbf file when I press enter on the attachment then I press insert +
spacebar then letter o for OCR then I press letter d for document
then I waited jaws not reading anything yet !! What am I doing wrong in
here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may contain information that is privileged and or confidential and is
intended only for the individual or entity to which it is addressed. If
you are not the intended recipient, or agent responsible for delivering
this communication, you are hereby notified that any dissemination,
distribution, copying or disclosure of this communication is strictly
prohibited. If you have received this transmission in error, please
notify the sender immediately, and delete the original communication and
any attachment from any computer, server or other electronic recording
or storage device. Receipt by anyone other than the intended recipient
is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me that I receive from you today (Thursday) ? Also please tell me what
you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.









.

moderated Re: focus 40 blue and BARD

Marlo Green
 

Hi,

Thank you for this. I used the instructions someone provided earlier to read via the mobile app. I would like to download the whole bible and read it with my braille display. If I take the SD card and put it in my computer, can I take that file and bring it back to my braille display and read it in scratch pad? Thank you.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Thursday, February 27, 2020 8:07 AM
To: main@jfw.groups.io
Subject: Re: focus 40 blue and BARD

Marlo,
Is it a file with a .ZIP extension?
First you have to unzip it and there should be a BRF file, and you should put that into the Braille display.
It should have an SD card to copy it into, and then find it via the file menu of the Braille display.
Glenn
----- Original Message -----
From: "Kimber Gardner" <kimbersinbox1963@...>
To: <main@jfw.groups.io>
Sent: Thursday, February 27, 2020 8:43 AM
Subject: Re: focus 40 blue and BARD


Hi,

I would open the file with wordpad and silence the synth so it isn't
blabbing on and on while you are trying to read.

That's what I used to do anyway. The one problem with this approach is
you won't be able to mark your place unless you actually insert
something into the file. I used to write three asterisks and the words
stopped reading here. That way when you open the book again you will
be able to easily find where you left off reading.

Kim

On 2/27/20, Marlo Green <marlogreen@...> wrote:
Good Evening



Can someone elighten me on how to use a braille
display with a downloaded bARD book? I downloaded it and the file is
there but I'll be darned if I know how to open it so I can read.
Thanks for all the help from all you experts out here.



Marlo from california





--
Kimberly


moderated Re: : Com Pilot instructions

Glenn / Lenny
 

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.