Date   

moderated Re: version questions

Mario
 

not to sound rude, and please don't be offended, but holding down insert and then pressing j doesn't get you to the interface for JAWS?

-------- Original Message --------
From: Madison Martin [mailto:maddymartin@mymts.net]
To: <main@jfw.groups.io>
Date: Tuesday, December 29, 2020, 12:38 PM
Subject: version questions
I can't seem to get insert j to work...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:31 AM
To: main@jfw.groups.io
Subject: Re: version questions

Ok...up arrow twice then. :)Yes, exit is at the very bottom.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: version questions

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have
jaws in
the system tray". Unless something has changed recently, it does work
here in
this fashion. I have not had JAWS set to use its own window/not be in
the system
tray for many years. I also don't have JAWS 2021, though, so it's possible
something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com%2F&amp;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f
640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8e
yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little
window is to go to the JAWS menu with jaws key + j, and hit up arrow once
(probably, this might be version dependent I suppose, but it's usuallya
t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want
to know
your outlook version number and then paste it to someone? If you are getting
that info with tge command JAWS commands to display the version
information of
an executable, this isn't displayed on screen so you can't copy and
paste it as
though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you
need,
then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to
remember
outlook having an 'about" screen somewhere, too, but at the moment I
can't find
it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the
keystroke to get the Outlook version I copy and paste it, but it doesn't
show up
in the message, but as attachments, none of which are the actual version
info
they just seem to be recent messages, what am I doing wrong?
Thanks Madison











































.


moderated Re: version questions

JM Casey
 

It works with JAWS 2018, as well.

It would be a surprising change if they removed it altogether, but I did say the position of the option might be version dependent. It's usually very near the bottom of for example a help menu in most programmes.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario
Sent: December 29, 2020 01:03 PM
To: main@jfw.groups.io
Subject: Re: version questions

that used to work back when JAWS was at version 14 - 18. I don't think it works in later versions anymore.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@outlook.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Tuesday, December 29, 2020, 12:27 PM
Subject: version questions
I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws in the system tray". Unless something has changed recently, it does work here in this fashion. I have not had JAWS set to use its own window/not be in the system tray for many years. I also don't have JAWS 2021, though, so it's possible something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com%2F&;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little window is to go to the JAWS menu with jaws key + j, and hit up arrow once (probably, this might be version dependent I suppose, but it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to know your outlook version number and then paste it to someone? If you are getting that info with tge command JAWS commands to display the version information of an executable, this isn't displayed on screen so you can't copy and paste it as though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you need, then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to remember outlook having an 'about" screen somewhere, too, but at the moment I can't find it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the keystroke to get the Outlook version I copy and paste it, but it doesn't show up in the message, but as attachments, none of which are the actual version info they just seem to be recent messages, what am I doing wrong?
Thanks Madison
































.


moderated Re: version questions

Richard Turner
 

If you are hearing alt+windows+q when pressing the insert key, you have issues that likely won't be resolved via email.
I think perhaps it is time to call Microsoft Accessibility 800-936-5900
Or try calling Freedom Scientific, I don't have their support number memorized, but their sales number is 800-444-4443.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:53 AM
To: main@jfw.groups.io
Subject: Re: version questions

Capslock key, as the actual insert key on this laptop doesn't seem to work (it says alt windows q).

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 11:48 AM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j should never move to another icon.
Are you sure you are hitting insert+j? which insert key are you using?


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com%2F&;data=04%7C01%7C%7C576acca0d3cc40c4f25d08d8ac224836%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637448610521732036%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=Dh1dMD7k3ytpOAmoUWTc9Qquka5Qn1jqAuwOC%2FM1NdM%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:48 AM
To: main@jfw.groups.io
Subject: Re: version questions

All it does when I press it is jump to another icon on my desktop. When I alt tab Jaws doesn't come up, so what does that mean?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:40 AM
To: main@jfw.groups.io
Subject: Re: version questions

So when you hit insert-j, nothing happens?
DO you have JAWS set to display in its own window or running from system tray?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 12:38 PM
To: main@jfw.groups.io
Subject: Re: version questions

I can't seem to get insert j to work...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:31 AM
To: main@jfw.groups.io
Subject: Re: version questions

Ok...up arrow twice then. :)Yes, exit is at the very bottom.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: version questions

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com
%2F&amp;data=04%7C01%7C%7C9a209a2679824f537e6e08d8ac219601%7C84df9e7fe9f640afb43
5aaaaaaaaaaaa%7C1%7C0%7C637448607533468793%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wL
jAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=8nMMf8v%2
FHepOqrJu0YQFNivuxs%2FC21%2BdrKpE1zaKKYw%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws in the system tray". Unless something has changed recently, it does work here in this fashion. I have not had JAWS set to use its own window/not be in the system tray for many years. I also don't have JAWS 2021, though, so it's possible something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com%2F&amp;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f
640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8e
yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little window is to go to the JAWS menu with jaws key + j, and hit up arrow once (probably, this might be version dependent I suppose, but it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to know your outlook version number and then paste it to someone? If you are getting that info with tge command JAWS commands to display the version information of an executable, this isn't displayed on screen so you can't copy and paste it as though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you need, then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to remember outlook having an 'about" screen somewhere, too, but at the moment I can't find it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the keystroke to get the Outlook version I copy and paste it, but it doesn't show up in the message, but as attachments, none of which are the actual version info they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: version questions

Mario
 

that used to work back when JAWS was at version 14 - 18. I don't think it works in later versions anymore.

-------- Original Message --------
From: Richard Turner [mailto:richardturner42@outlook.com]
To: main@jfw.groups.io <main@jfw.groups.io>
Date: Tuesday, December 29, 2020, 12:27 PM
Subject: version questions
I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon airlock with a man from Betelgeuse, and about to die of
asphyxiation in deep space, that I really wish I'd listened to what my
mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have
jaws in the system tray". Unless something has changed recently, it does
work here in this fashion. I have not had JAWS set to use its own
window/not be in the system tray for many years. I also don't have JAWS
2021, though, so it's possible something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon airlock with a man from Betelgeuse, and about to die of
asphyxiation in deep space, that I really wish I'd listened to what my
mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com%2F&;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient
little window is to go to the JAWS menu with jaws key + j, and hit up
arrow once (probably, this might be version dependent I suppose, but
it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want
to know your outlook version number and then paste it to someone? If you
are getting that info with tge command JAWS commands to display the
version information of an executable, this isn't displayed on screen so
you can't copy and paste it as though it was a line of text placed in an
edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you
need, then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to
remember outlook having an 'about" screen somewhere, too, but at the
moment I can't find it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do
the keystroke to get the Outlook version I copy and paste it, but it
doesn't show up in the message, but as attachments, none of which are
the actual version info they just seem to be recent messages, what am I
doing wrong?
Thanks Madison
































.


moderated Re: version questions

JM Casey
 

If you have JAWS set to not display in its own window, then no, it won't
come up when you move between windows, as there isn't a JAWS window open
unless you open the settings centre, or some other JAWS utility. But jaws
key + j should always bring up the JAWS menu regardless.
Have you never used the JAWS menu before? If you have, when did it start not
working?
What kind of keyboard are you using?
Is your numlock on?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 12:48 PM
To: main@jfw.groups.io
Subject: Re: version questions

All it does when I press it is jump to another icon on my desktop. When I
alt tab Jaws doesn't come up, so what does that mean?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:40 AM
To: main@jfw.groups.io
Subject: Re: version questions

So when you hit insert-j, nothing happens?
DO you have JAWS set to display in its own window or running from system
tray?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 12:38 PM
To: main@jfw.groups.io
Subject: Re: version questions

I can't seem to get insert j to work...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:31 AM
To: main@jfw.groups.io
Subject: Re: version questions

Ok...up arrow twice then. :)Yes, exit is at the very bottom.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: version questions

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation
in deep space, that I really wish I'd listened to what my mother told me
when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws
in the system tray". Unless something has changed recently, it does work
here in this fashion. I have not had JAWS set to use its own window/not be
in the system tray for many years. I also don't have JAWS 2021, though, so
it's possible something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation
in deep space, that I really wish I'd listened to what my mother told me
when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com%2F&amp;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f
640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8e
yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little
window is to go to the JAWS menu with jaws key + j, and hit up arrow once
(probably, this might be version dependent I suppose, but it's usuallya t
the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to
know your outlook version number and then paste it to someone? If you are
getting that info with tge command JAWS commands to display the version
information of an executable, this isn't displayed on screen so you can't
copy and paste it as though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you
need, then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to
remember outlook having an 'about" screen somewhere, too, but at the moment
I can't find it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the
keystroke to get the Outlook version I copy and paste it, but it doesn't
show up in the message, but as attachments, none of which are the actual
version info they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: Jaws 2021 question/problem

Marianne Denning
 

You can go to your JAWS menu with insert J or get there from the desk top.
Up arrow to about and hit enter. That will tell you how many upgrades you
have left, the current version that is running and other important
information about your JAWS.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 12:23 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

Shift tab when I'm where?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of T. Civitello
Sent: December 29, 2020 10:08 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

Shift tab until you have Jaws highlighted and up arrow once.

-----Original Message-----
From: Madison Martin
Sent: Tuesday, December 29, 2020 7:59 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

How do I get the exact version of Jaws that I have?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: December 29, 2020 9:13 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

Yes, make sure you include the version numbers of the programs involved,
e.g.
Jaws 2021, Windows 10, Office 2013, even better is to be specific as to
which Jaws build you use, the exact version of Windows which you can find by
typing "WinVer" into the Run or Windows search box and also the exact
Outlook version, you can get it by opening Outlook and pressing Jaws Key +
Control + V, if you press it twice quickly it will be in a virtual window
where you can highlight it and simply copy and paste it into your email.
Then describe exactly what you are doing and what issue you have.

Best regards,
Sieghard

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Monday, December 28, 2020 1:08 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

So I just describe the issue to them?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 28, 2020 3:04 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

Any Jaws user, anywhere in the world can report things by writing to
support@freedomscientific.com Now, there may be a separate email address
from Canada or other countries, I do not know, but I'm sure they will let
you know if that is the case.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation
in deep space, that I really wish I'd listened to what my mother told me
when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Monday, December 28, 2020 1:02 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

So how do I report this issue? Can I still do so even though I live in
Canada? I hope that anyone else who's experiencing this will report it to
them as well...


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 28, 2020 2:00 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

Has anyone contacted FS support about this issue?
It won't get fixed if folks don't contact them directly.

I don't have so many people in my contacts that I need this feature, but if
you do, providing direct feedback would help.




Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation
in deep space, that I really wish I'd listened to what my mother told me
when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com
%2F&amp;data=04%7C01%7C%7Cc9b484af52204f53e3e108d8ab73966f%7C84df9e7fe9f640a
fb43
5aaaaaaaaaaaa%7C1%7C0%7C637447860215742993%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiM
C4wL
jAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=kvk6t
p1cT
jwLjNPqaJccWu03vI3nW6wmujk%2BjyR3j0M%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ron Pelletier
Sent: Monday, December 28, 2020 11:50 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

Hi Madison,

It is a problem in JAWS 2021 which was there in 2020 also and was not fixed.
I wonder when they will fix it, hopefully In the next update.

Ron & Danvers


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Monday, December 28, 2020 2:40 PM
To: jfw@groups.io
Subject: Jaws 2021 question/problem

Hi all,
I upgraded to Jaws 2021 almost 2 weeks ago now and I have a problem that
I've noticed. When I go to my favourites list in Edge, or when I go into
contacts in Outlook, or start a new message in Outlook type a letter and
then do ctrl k to bring up a list of addresses starting with that letter,
Jaws will only read a few items and then stop speaking. When this happens in
favourites I have to alt tab to something else and then alt tab back and
then Jaws will start reading again, but then stops speaking again after
reading a few more items. When this happens in Outlook I have to go to the
bottom of the list of addresses starting with that letter or the end of my
contacts and then arrow up and Jaws will read a few more and then stop
speaking again. Now when I upgraded I was asked if I wanted to import
settings or something like that and I said yes, though I don't recall having
any settings set that have anything to do with this. So I'm wondering, is
this an issue with Jaws 2021, or is there some setting or something that I
can change so that Jaws will stop doing this? I'm just glad that my Braille
display works when this happens. Now, I know some of you might suggest
switching to an earlier version of Jaws, but I do these things on a daily
basis, and besides I don't have any earlier versions of Jaws on this
computer as I uninstalled 2018 after I upgraded. Running Jaws 2021, Outlook
2013, the latest Edge and Windows 10 2004. Thanks for any help/suggestions
anyone can provide!!!!!
Madison


moderated Re: version questions

Madison Martin
 

Capslock key, as the actual insert key on this laptop doesn't seem to work (it
says alt windows q).

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 11:48 AM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j should never move to another icon.
Are you sure you are hitting insert+j? which insert key are you using?


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:48 AM
To: main@jfw.groups.io
Subject: Re: version questions

All it does when I press it is jump to another icon on my desktop. When I alt
tab Jaws doesn't come up, so what does that mean?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:40 AM
To: main@jfw.groups.io
Subject: Re: version questions

So when you hit insert-j, nothing happens?
DO you have JAWS set to display in its own window or running from system tray?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 12:38 PM
To: main@jfw.groups.io
Subject: Re: version questions

I can't seem to get insert j to work...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:31 AM
To: main@jfw.groups.io
Subject: Re: version questions

Ok...up arrow twice then. :)Yes, exit is at the very bottom.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: version questions

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com
%2F&amp;data=04%7C01%7C%7C9a209a2679824f537e6e08d8ac219601%7C84df9e7fe9f640afb43
5aaaaaaaaaaaa%7C1%7C0%7C637448607533468793%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wL
jAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=8nMMf8v%2
FHepOqrJu0YQFNivuxs%2FC21%2BdrKpE1zaKKYw%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws in
the system tray". Unless something has changed recently, it does work here in
this fashion. I have not had JAWS set to use its own window/not be in the system
tray for many years. I also don't have JAWS 2021, though, so it's possible
something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com%2F&amp;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f
640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8e
yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little
window is to go to the JAWS menu with jaws key + j, and hit up arrow once
(probably, this might be version dependent I suppose, but it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to know
your outlook version number and then paste it to someone? If you are getting
that info with tge command JAWS commands to display the version information of
an executable, this isn't displayed on screen so you can't copy and paste it as
though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you need,
then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to remember
outlook having an 'about" screen somewhere, too, but at the moment I can't find
it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the
keystroke to get the Outlook version I copy and paste it, but it doesn't show up
in the message, but as attachments, none of which are the actual version info
they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: version questions

Madison Martin
 

I don't think I have another Jaws dialog open... I've already tried rebooting my
computer, twice.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 11:47 AM
To: main@jfw.groups.io
Subject: Re: version questions

If it does nothing, it may be you have another Jaws dialog already open.
If not, perhaps a reboot is in order.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:38 AM
To: main@jfw.groups.io
Subject: Re: version questions

I can't seem to get insert j to work...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:31 AM
To: main@jfw.groups.io
Subject: Re: version questions

Ok...up arrow twice then. :)Yes, exit is at the very bottom.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: version questions

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com
%2F&amp;data=04%7C01%7C%7Cabd3611f0cad47ee171808d8ac2065b1%7C84df9e7fe9f640afb43
5aaaaaaaaaaaa%7C1%7C0%7C637448602429977169%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wL
jAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=2YHkcDJr2
JyCfXnySIb39%2F5%2B6dhoHSR%2Ba3X7memEB2Q%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws in
the system tray". Unless something has changed recently, it does work here in
this fashion. I have not had JAWS set to use its own window/not be in the system
tray for many years. I also don't have JAWS 2021, though, so it's possible
something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com%2F&amp;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f
640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8e
yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little
window is to go to the JAWS menu with jaws key + j, and hit up arrow once
(probably, this might be version dependent I suppose, but it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to know
your outlook version number and then paste it to someone? If you are getting
that info with tge command JAWS commands to display the version information of
an executable, this isn't displayed on screen so you can't copy and paste it as
though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you need,
then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to remember
outlook having an 'about" screen somewhere, too, but at the moment I can't find
it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the
keystroke to get the Outlook version I copy and paste it, but it doesn't show up
in the message, but as attachments, none of which are the actual version info
they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: version questions

Richard Turner
 

Insert+j should never move to another icon.
Are you sure you are hitting insert+j? which insert key are you using?


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:48 AM
To: main@jfw.groups.io
Subject: Re: version questions

All it does when I press it is jump to another icon on my desktop. When I alt tab Jaws doesn't come up, so what does that mean?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:40 AM
To: main@jfw.groups.io
Subject: Re: version questions

So when you hit insert-j, nothing happens?
DO you have JAWS set to display in its own window or running from system tray?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 12:38 PM
To: main@jfw.groups.io
Subject: Re: version questions

I can't seem to get insert j to work...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:31 AM
To: main@jfw.groups.io
Subject: Re: version questions

Ok...up arrow twice then. :)Yes, exit is at the very bottom.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: version questions

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com%2F&;data=04%7C01%7C%7C9a209a2679824f537e6e08d8ac219601%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637448607533468793%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=8nMMf8v%2FHepOqrJu0YQFNivuxs%2FC21%2BdrKpE1zaKKYw%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws in the system tray". Unless something has changed recently, it does work here in this fashion. I have not had JAWS set to use its own window/not be in the system tray for many years. I also don't have JAWS 2021, though, so it's possible something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com%2F&amp;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f
640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8e
yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little window is to go to the JAWS menu with jaws key + j, and hit up arrow once (probably, this might be version dependent I suppose, but it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to know your outlook version number and then paste it to someone? If you are getting that info with tge command JAWS commands to display the version information of an executable, this isn't displayed on screen so you can't copy and paste it as though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you need, then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to remember outlook having an 'about" screen somewhere, too, but at the moment I can't find it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the keystroke to get the Outlook version I copy and paste it, but it doesn't show up in the message, but as attachments, none of which are the actual version info they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: version questions

Richard Turner
 

If it does nothing, it may be you have another Jaws dialog already open.
If not, perhaps a reboot is in order.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:38 AM
To: main@jfw.groups.io
Subject: Re: version questions

I can't seem to get insert j to work...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:31 AM
To: main@jfw.groups.io
Subject: Re: version questions

Ok...up arrow twice then. :)Yes, exit is at the very bottom.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: version questions

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com%2F&;data=04%7C01%7C%7Cabd3611f0cad47ee171808d8ac2065b1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637448602429977169%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=2YHkcDJr2JyCfXnySIb39%2F5%2B6dhoHSR%2Ba3X7memEB2Q%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws in the system tray". Unless something has changed recently, it does work here in this fashion. I have not had JAWS set to use its own window/not be in the system tray for many years. I also don't have JAWS 2021, though, so it's possible something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com%2F&amp;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f
640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8e
yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little window is to go to the JAWS menu with jaws key + j, and hit up arrow once (probably, this might be version dependent I suppose, but it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to know your outlook version number and then paste it to someone? If you are getting that info with tge command JAWS commands to display the version information of an executable, this isn't displayed on screen so you can't copy and paste it as though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you need, then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to remember outlook having an 'about" screen somewhere, too, but at the moment I can't find it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the keystroke to get the Outlook version I copy and paste it, but it doesn't show up in the message, but as attachments, none of which are the actual version info they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: version questions

Madison Martin
 

All it does when I press it is jump to another icon on my desktop. When I alt
tab Jaws doesn't come up, so what does that mean?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:40 AM
To: main@jfw.groups.io
Subject: Re: version questions

So when you hit insert-j, nothing happens?
DO you have JAWS set to display in its own window or running from system tray?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 12:38 PM
To: main@jfw.groups.io
Subject: Re: version questions

I can't seem to get insert j to work...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:31 AM
To: main@jfw.groups.io
Subject: Re: version questions

Ok...up arrow twice then. :)Yes, exit is at the very bottom.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: version questions

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws in
the system tray". Unless something has changed recently, it does work here in
this fashion. I have not had JAWS set to use its own window/not be in the system
tray for many years. I also don't have JAWS 2021, though, so it's possible
something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com%2F&amp;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f
640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8e
yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little
window is to go to the JAWS menu with jaws key + j, and hit up arrow once
(probably, this might be version dependent I suppose, but it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to know
your outlook version number and then paste it to someone? If you are getting
that info with tge command JAWS commands to display the version information of
an executable, this isn't displayed on screen so you can't copy and paste it as
though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you need,
then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to remember
outlook having an 'about" screen somewhere, too, but at the moment I can't find
it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the
keystroke to get the Outlook version I copy and paste it, but it doesn't show up
in the message, but as attachments, none of which are the actual version info
they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: version questions

JM Casey
 

So when you hit insert-j, nothing happens?
DO you have JAWS set to display in its own window or running from system
tray?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 12:38 PM
To: main@jfw.groups.io
Subject: Re: version questions

I can't seem to get insert j to work...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:31 AM
To: main@jfw.groups.io
Subject: Re: version questions

Ok...up arrow twice then. :)Yes, exit is at the very bottom.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: version questions

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation
in deep space, that I really wish I'd listened to what my mother told me
when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws
in the system tray". Unless something has changed recently, it does work
here in this fashion. I have not had JAWS set to use its own window/not be
in the system tray for many years. I also don't have JAWS 2021, though, so
it's possible something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation
in deep space, that I really wish I'd listened to what my mother told me
when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com%2F&amp;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f
640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8e
yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little
window is to go to the JAWS menu with jaws key + j, and hit up arrow once
(probably, this might be version dependent I suppose, but it's usuallya t
the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to
know your outlook version number and then paste it to someone? If you are
getting that info with tge command JAWS commands to display the version
information of an executable, this isn't displayed on screen so you can't
copy and paste it as though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you
need, then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to
remember outlook having an 'about" screen somewhere, too, but at the moment
I can't find it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the
keystroke to get the Outlook version I copy and paste it, but it doesn't
show up in the message, but as attachments, none of which are the actual
version info they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: version questions

Richard Turner
 

The exact steps are:
Insert+j, up arrow twice to About and hit enter.
Or, the easy way in my mind is insert+j then control+insert+v

Either method gets you what u want.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:31 AM
To: main@jfw.groups.io
Subject: Re: version questions

Ok...up arrow twice then. :)Yes, exit is at the very bottom.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: version questions

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com%2F&;data=04%7C01%7C%7C7971608a68a142740a9d08d8ac1f776f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637448598434436278%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=5JHu9tThVI4UaMWQ5BUn1oDi7e2%2B1TUz7BYsnOc4sNY%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws in the system tray". Unless something has changed recently, it does work here in this fashion. I have not had JAWS set to use its own window/not be in the system tray for many years. I also don't have JAWS 2021, though, so it's possible something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com%2F&amp;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f
640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8e
yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little window is to go to the JAWS menu with jaws key + j, and hit up arrow once (probably, this might be version dependent I suppose, but it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to know your outlook version number and then paste it to someone? If you are getting that info with tge command JAWS commands to display the version information of an executable, this isn't displayed on screen so you can't copy and paste it as though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you need, then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to remember outlook having an 'about" screen somewhere, too, but at the moment I can't find it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the keystroke to get the Outlook version I copy and paste it, but it doesn't show up in the message, but as attachments, none of which are the actual version info they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: version questions

Madison Martin
 

I can't seem to get insert j to work...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 11:31 AM
To: main@jfw.groups.io
Subject: Re: version questions

Ok...up arrow twice then. :)Yes, exit is at the very bottom.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: version questions

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws in
the system tray". Unless something has changed recently, it does work here in
this fashion. I have not had JAWS set to use its own window/not be in the system
tray for many years. I also don't have JAWS 2021, though, so it's possible
something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com%2F&amp;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f
640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8e
yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little
window is to go to the JAWS menu with jaws key + j, and hit up arrow once
(probably, this might be version dependent I suppose, but it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to know
your outlook version number and then paste it to someone? If you are getting
that info with tge command JAWS commands to display the version information of
an executable, this isn't displayed on screen so you can't copy and paste it as
though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you need,
then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to remember
outlook having an 'about" screen somewhere, too, but at the moment I can't find
it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the
keystroke to get the Outlook version I copy and paste it, but it doesn't show up
in the message, but as attachments, none of which are the actual version info
they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: version questions

JM Casey
 

Ok...up arrow twice then. :)Yes, exit is at the very bottom.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:28 PM
To: main@jfw.groups.io
Subject: Re: version questions

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation
in deep space, that I really wish I'd listened to what my mother told me
when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws
in the system tray". Unless something has changed recently, it does work
here in this fashion. I have not had JAWS set to use its own window/not be
in the system tray for many years. I also don't have JAWS 2021, though, so
it's possible something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation
in deep space, that I really wish I'd listened to what my mother told me
when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42
.com%2F&amp;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f
640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8e
yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp
;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little
window is to go to the JAWS menu with jaws key + j, and hit up arrow once
(probably, this might be version dependent I suppose, but it's usuallya t
the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to
know your outlook version number and then paste it to someone? If you are
getting that info with tge command JAWS commands to display the version
information of an executable, this isn't displayed on screen so you can't
copy and paste it as though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you
need, then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to
remember outlook having an 'about" screen somewhere, too, but at the moment
I can't find it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the
keystroke to get the Outlook version I copy and paste it, but it doesn't
show up in the message, but as attachments, none of which are the actual
version info they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: version questions

Richard Turner
 

I was referring specifically to insert+j then up arrow once.
For me, that lands on the exit button. Nothing about a version number.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: Tuesday, December 29, 2020 9:25 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws in the system tray". Unless something has changed recently, it does work here in this fashion. I have not had JAWS set to use its own window/not be in the system tray for many years. I also don't have JAWS 2021, though, so it's possible something has changed...



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com%2F&;data=04%7C01%7C%7C1575a93d000c4e45ca1a08d8ac1ec0c1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637448595362659658%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=ihaCiTUHgDkcVqwEgvNuFcL0R%2B3ZoUfKpwF1KXqR0V8%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little window is to go to the JAWS menu with jaws key + j, and hit up arrow once (probably, this might be version dependent I suppose, but it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to know your outlook version number and then paste it to someone? If you are getting that info with tge command JAWS commands to display the version information of an executable, this isn't displayed on screen so you can't copy and paste it as though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you need, then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to remember outlook having an 'about" screen somewhere, too, but at the moment I can't find it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the keystroke to get the Outlook version I copy and paste it, but it doesn't show up in the message, but as attachments, none of which are the actual version info they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: version questions

JM Casey
 

Hello Richard.

I'm not sure what you mean by saying that "it doesn't work if you have jaws
in the system tray". Unless something has changed recently, it does work
here in this fashion. I have not had JAWS set to use its own window/not be
in the system tray for many years. I also don't have JAWS 2021, though, so
it's possible something has changed...

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 29, 2020 12:22 PM
To: main@jfw.groups.io
Subject: Re: version questions

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using
shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation
in deep space, that I really wish I'd listened to what my mother told me
when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little
window is to go to the JAWS menu with jaws key + j, and hit up arrow once
(probably, this might be version dependent I suppose, but it's usuallya t
the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to
know your outlook version number and then paste it to someone? If you are
getting that info with tge command JAWS commands to display the version
information of an executable, this isn't displayed on screen so you can't
copy and paste it as though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you
need, then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to
remember outlook having an 'about" screen somewhere, too, but at the moment
I can't find it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the
keystroke to get the Outlook version I copy and paste it, but it doesn't
show up in the message, but as attachments, none of which are the actual
version info they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: version questions

Richard Turner
 

Insert+j then up arrow does not work if you have Jaws in the System tray.
But, insert+j followed by control+insert+v works in any setup.
And, control+insert+v works in any and all programs.
Twice quickly puts it in the virtual window so you can copy it by using shift+the arrow keys depending on how much you want to copy.


Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Tuesday, December 29, 2020 9:21 AM
To: main@jfw.groups.io
Subject: Re: version questions

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little window is to go to the JAWS menu with jaws key + j, and hit up arrow once (probably, this might be version dependent I suppose, but it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to know your outlook version number and then paste it to someone? If you are getting that info with tge command JAWS commands to display the version information of an executable, this isn't displayed on screen so you can't copy and paste it as though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you need, then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to remember outlook having an 'about" screen somewhere, too, but at the moment I can't find it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the keystroke to get the Outlook version I copy and paste it, but it doesn't show up in the message, but as attachments, none of which are the actual version info they just seem to be recent messages, what am I doing wrong?
Thanks Madison


moderated Re: Jaws 2021 question/problem

Madison Martin
 

Shift tab when I'm where?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of T. Civitello
Sent: December 29, 2020 10:08 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

Shift tab until you have Jaws highlighted and up arrow once.

-----Original Message-----
From: Madison Martin
Sent: Tuesday, December 29, 2020 7:59 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

How do I get the exact version of Jaws that I have?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: December 29, 2020 9:13 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

Yes, make sure you include the version numbers of the programs involved, e.g.
Jaws 2021, Windows 10, Office 2013, even better is to be specific as to which
Jaws build you use, the exact version of Windows which you can find by typing
"WinVer" into the Run or Windows search box and also the exact Outlook version,
you can get it by opening Outlook and pressing Jaws Key + Control + V, if you
press it twice quickly it will be in a virtual window where you can highlight it
and simply copy and paste it into your email.
Then describe exactly what you are doing and what issue you have.

Best regards,
Sieghard

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Monday, December 28, 2020 1:08 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

So I just describe the issue to them?

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 28, 2020 3:04 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

Any Jaws user, anywhere in the world can report things by writing to
support@freedomscientific.com Now, there may be a separate email address from
Canada or other countries, I do not know, but I'm sure they will let you know if
that is the case.



Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site, www.turner42.com
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Monday, December 28, 2020 1:02 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

So how do I report this issue? Can I still do so even though I live in Canada? I
hope that anyone else who's experiencing this will report it to them as well...


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: December 28, 2020 2:00 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

Has anyone contacted FS support about this issue?
It won't get fixed if folks don't contact them directly.

I don't have so many people in my contacts that I need this feature, but if you
do, providing direct feedback would help.




Richard, in the U.S.

"You know," said Arthur, "it's at times like this, when I'm trapped in a
Vogon
airlock with a man from Betelgeuse, and about to die of asphyxiation in deep
space, that I really wish I'd listened to what my mother told me when I was
young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

* I'm not the card shark
* My web site,
https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.turner42.com
%2F&amp;data=04%7C01%7C%7Cc9b484af52204f53e3e108d8ab73966f%7C84df9e7fe9f640afb43
5aaaaaaaaaaaa%7C1%7C0%7C637447860215742993%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wL
jAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=kvk6tp1cT
jwLjNPqaJccWu03vI3nW6wmujk%2BjyR3j0M%3D&amp;reserved=0
*
-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ron Pelletier
Sent: Monday, December 28, 2020 11:50 AM
To: main@jfw.groups.io
Subject: Re: Jaws 2021 question/problem

Hi Madison,

It is a problem in JAWS 2021 which was there in 2020 also and was not fixed.
I wonder when they will fix it, hopefully In the next update.

Ron & Danvers


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: Monday, December 28, 2020 2:40 PM
To: jfw@groups.io
Subject: Jaws 2021 question/problem

Hi all,
I upgraded to Jaws 2021 almost 2 weeks ago now and I have a problem that
I've
noticed. When I go to my favourites list in Edge, or when I go into
contacts in
Outlook, or start a new message in Outlook type a letter and then do ctrl k
to
bring up a list of addresses starting with that letter, Jaws will only read
a
few items and then stop speaking. When this happens in favourites I have to
alt
tab to something else and then alt tab back and then Jaws will start reading
again, but then stops speaking again after reading a few more items. When
this
happens in Outlook I have to go to the bottom of the list of addresses
starting
with that letter or the end of my contacts and then arrow up and Jaws will
read
a few more and then stop speaking again. Now when I upgraded I was asked if
I
wanted to import settings or something like that and I said yes, though I
don't
recall having any settings set that have anything to do with this. So I'm
wondering, is this an issue with Jaws 2021, or is there some setting or
something that I can change so that Jaws will stop doing this? I'm just
glad
that my Braille display works when this happens. Now, I know some of you
might
suggest switching to an earlier version of Jaws, but I do these things on a
daily basis, and besides I don't have any earlier versions of Jaws on this
computer as I uninstalled 2018 after I upgraded. Running Jaws 2021, Outlook
2013, the latest Edge and Windows 10 2004. Thanks for any help/suggestions
anyone can provide!!!!!
Madison


moderated Re: version questions

Madison Martin
 

Yes that's what I'm wanting.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of JM Casey
Sent: December 29, 2020 10:49 AM
To: main@jfw.groups.io
Subject: Re: version questions

Hey Madison.
A good way to get JAWS version information displayed inn a convenient little
window is to go to the JAWS menu with jaws key + j, and hit up arrow once
(probably, this might be version dependent I suppose, but it's usuallya t the
bottom) to "about". Hit enter and you'll get what you need.

As for outlook, I am not sure quite what it is that you want. You want to know
your outlook version number and then paste it to someone? If you are getting
that info with tge command JAWS commands to display the version information of
an executable, this isn't displayed on screen so you can't copy and paste it as
though it was a line of text placed in an edit field.
It isn't. But if you wanted you could use speech history to retrieve it.
Press insert space, then h, then up arrow til you find the text that you need,
then copy and paste, and press escape.
There are usually more efficient ways to get version info. I seem to remember
outlook having an 'about" screen somewhere, too, but at the moment I can't find
it. Haha



-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 11:28 AM
To: main@jfw.groups.io
Subject: version questions

Hi all,
How do I get the exact version of Jaws that I'm running? Also, when I do the
keystroke to get the Outlook version I copy and paste it, but it doesn't show up
in the message, but as attachments, none of which are the actual version info
they just seem to be recent messages, what am I doing wrong?
Thanks Madison

5281 - 5300 of 90293