Date   
moderated Re: unload and reload Jaws?

Bill White
 

Hi, David. Try the following keystroke to unload and reload JAWS:

 

JAWS key plus WinKey plus F4.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of David Griffith
Sent: Friday, March 6, 2020 4:01 PM
To: main@jfw.groups.io
Subject: Re: unload and reload Jaws?

 

Not here.

I have ben using Jaws since 1999 and in all this time this keystroke  on my systems only unloads Jaws but does not restart it.

 

David Griffith

 

Sent from Mail for Windows 10

 

From: netbat66
Sent: 06 March 2020 23:54
To: main@jfw.groups.io
Subject: Re: unload and reload Jaws?

 

jaws already has this option.

press the jaws key and f4. this will unload and reload it.

 

-----Original Message-----

From: David Griffith

Sent: Friday, March 06, 2020 3:42 PM

To: main@jfw.groups.io

Subject: Re: unload and reload Jaws?

 

 

 

 

 

Personally as   a feature request I would prefer that Jaws has the same

behaviour as NVDA. That is, with NVDA running pressing control alt and N will

close and restart NVDA in one operation without any further intervention. Jaws

should do the same thing  with control alt J.

 

 

 

This NVDA feature is very useful if for any reason NVDA has stalled or speech

has been lost. It clears up these problems quickly and nicely as NVDA instantly

restarts itself with this forced restart.

 

 

 

In contrast if Jaws stalls you have to first of all try and shut it down and

then try to re-load it. The exception to this is if Jaws itself recognises that

it has crashed in which case it will sometimes restart itself  without any

intervention from the user. The drawback  it that it normally takes quite a

time to come to this conclusion.

 

Shutting down Jaws within one session in these circumstances is also not always

straightforward. Occasionally I have ended up with multiple Jaws icons on my

system tray as previous version have clearly failed to completely unload, even

though only one instance of Jaws is talking.

 

 

 

A computer restart is normally required to remove these multiple ghost

instances of Jaws.

 

 

 

I would much prefer NVDA’s  one shortcut approach  which in my experience never

results in multiple versions of NVDA trying to run in the background.

 

 

 

David Griffith

 

 

 

 

 

 

 

 

 

 

 

 

 

Sent from Mail for Windows 10

 

 

 

 

 

From: ben

Sent: 06 March 2020 22:56

To: main@jfw.groups.io

Subject: Re: unload and reload Jaws?

 

 

 

 

 

Hi,

 

 

 

 

 

 

 

The two ways I restart JAWS are as follows:

 

 

 

One, press the Windows key and the letter r to bring up the run box. Type

jaws2020 and press enter. JAWS should come up talking.

 

 

 

 

 

 

 

Two, press the windows key and the letter m to bring up the desktop. Press j

for JAWS and press enter. The only thing to remember with the desktop method is

if you have other things that start with j on your desktop, you might land on

one of those.

 

 

 

 

 

 

 

I hope this helps.

 

 

 

 

 

 

 

 

 

 

 

 

 

On Mar 6, 2020, at 2:59 PM, Andrew J. LaPointe <alapointe89@...> wrote:

 

 

 

 



 

Hi, I was using qread and decided to unload jaws (jaws key f4.  When I wanted

to reload jaws, I used control alt and j and it didn’t work.  Is there a new

way of reloading Jaws now?  I am using the latest jaws 20.  What I had to do

was shut the computer and restart and Jaws loaded at startup.  Thank you for

your help.  Also, I am most likely getting a used Romeo Printer at Humanware.

Thanks to everyone that helped me sort all this…you are all great!!  Andy and

Shubert

 

 

 

Andrew J. LaPointe, President

 

Friends of the Salem Council on Aging

 

34 Raymond Ave.

 

Salem, MA. 01970

 

Home: 978-745-4289 cell: 978-578-0185

 

 

 

Editor, Commission Commuter Update and the Safe Disabled Traveler Notebook

 

Talking Information Center

 

 

 

 

 

 

 

 

 

 

 

 

 

moderated Re: unload and reload Jaws?

David Griffith
 

Not here.

I have ben using Jaws since 1999 and in all this time this keystroke  on my systems only unloads Jaws but does not restart it.

 

David Griffith

 

Sent from Mail for Windows 10

 

From: netbat66
Sent: 06 March 2020 23:54
To: main@jfw.groups.io
Subject: Re: unload and reload Jaws?

 

jaws already has this option.

press the jaws key and f4. this will unload and reload it.

 

-----Original Message-----

From: David Griffith

Sent: Friday, March 06, 2020 3:42 PM

To: main@jfw.groups.io

Subject: Re: unload and reload Jaws?

 

 

 

 

 

Personally as   a feature request I would prefer that Jaws has the same

behaviour as NVDA. That is, with NVDA running pressing control alt and N will

close and restart NVDA in one operation without any further intervention. Jaws

should do the same thing  with control alt J.

 

 

 

This NVDA feature is very useful if for any reason NVDA has stalled or speech

has been lost. It clears up these problems quickly and nicely as NVDA instantly

restarts itself with this forced restart.

 

 

 

In contrast if Jaws stalls you have to first of all try and shut it down and

then try to re-load it. The exception to this is if Jaws itself recognises that

it has crashed in which case it will sometimes restart itself  without any

intervention from the user. The drawback  it that it normally takes quite a

time to come to this conclusion.

 

Shutting down Jaws within one session in these circumstances is also not always

straightforward. Occasionally I have ended up with multiple Jaws icons on my

system tray as previous version have clearly failed to completely unload, even

though only one instance of Jaws is talking.

 

 

 

A computer restart is normally required to remove these multiple ghost

instances of Jaws.

 

 

 

I would much prefer NVDA’s  one shortcut approach  which in my experience never

results in multiple versions of NVDA trying to run in the background.

 

 

 

David Griffith

 

 

 

 

 

 

 

 

 

 

 

 

 

Sent from Mail for Windows 10

 

 

 

 

 

From: ben

Sent: 06 March 2020 22:56

To: main@jfw.groups.io

Subject: Re: unload and reload Jaws?

 

 

 

 

 

Hi,

 

 

 

 

 

 

 

The two ways I restart JAWS are as follows:

 

 

 

One, press the Windows key and the letter r to bring up the run box. Type

jaws2020 and press enter. JAWS should come up talking.

 

 

 

 

 

 

 

Two, press the windows key and the letter m to bring up the desktop. Press j

for JAWS and press enter. The only thing to remember with the desktop method is

if you have other things that start with j on your desktop, you might land on

one of those.

 

 

 

 

 

 

 

I hope this helps.

 

 

 

 

 

 

 

 

 

 

 

 

 

On Mar 6, 2020, at 2:59 PM, Andrew J. LaPointe <alapointe89@...> wrote:

 

 

 

 



 

Hi, I was using qread and decided to unload jaws (jaws key f4.  When I wanted

to reload jaws, I used control alt and j and it didn’t work.  Is there a new

way of reloading Jaws now?  I am using the latest jaws 20.  What I had to do

was shut the computer and restart and Jaws loaded at startup.  Thank you for

your help.  Also, I am most likely getting a used Romeo Printer at Humanware.

Thanks to everyone that helped me sort all this…you are all great!!  Andy and

Shubert

 

 

 

Andrew J. LaPointe, President

 

Friends of the Salem Council on Aging

 

34 Raymond Ave.

 

Salem, MA. 01970

 

Home: 978-745-4289 cell: 978-578-0185

 

 

 

Editor, Commission Commuter Update and the Safe Disabled Traveler Notebook

 

Talking Information Center

 

 

 

 

 

 

 

 

 

 

 

 

 

moderated Re: unload and reload Jaws?

netbat66
 

jaws already has this option.
press the jaws key and f4. this will unload and reload it.

-----Original Message-----
From: David Griffith
Sent: Friday, March 06, 2020 3:42 PM
To: main@jfw.groups.io
Subject: Re: unload and reload Jaws?





Personally as a feature request I would prefer that Jaws has the same behaviour as NVDA. That is, with NVDA running pressing control alt and N will close and restart NVDA in one operation without any further intervention. Jaws should do the same thing with control alt J.



This NVDA feature is very useful if for any reason NVDA has stalled or speech has been lost. It clears up these problems quickly and nicely as NVDA instantly restarts itself with this forced restart.



In contrast if Jaws stalls you have to first of all try and shut it down and then try to re-load it. The exception to this is if Jaws itself recognises that it has crashed in which case it will sometimes restart itself without any intervention from the user. The drawback it that it normally takes quite a time to come to this conclusion.

Shutting down Jaws within one session in these circumstances is also not always straightforward. Occasionally I have ended up with multiple Jaws icons on my system tray as previous version have clearly failed to completely unload, even though only one instance of Jaws is talking.



A computer restart is normally required to remove these multiple ghost instances of Jaws.



I would much prefer NVDA’s one shortcut approach which in my experience never results in multiple versions of NVDA trying to run in the background.



David Griffith













Sent from Mail for Windows 10





From: ben
Sent: 06 March 2020 22:56
To: main@jfw.groups.io
Subject: Re: unload and reload Jaws?





Hi,







The two ways I restart JAWS are as follows:



One, press the Windows key and the letter r to bring up the run box. Type jaws2020 and press enter. JAWS should come up talking.







Two, press the windows key and the letter m to bring up the desktop. Press j for JAWS and press enter. The only thing to remember with the desktop method is if you have other things that start with j on your desktop, you might land on one of those.







I hope this helps.













On Mar 6, 2020, at 2:59 PM, Andrew J. LaPointe <alapointe89@...> wrote:






Hi, I was using qread and decided to unload jaws (jaws key f4. When I wanted to reload jaws, I used control alt and j and it didn’t work. Is there a new way of reloading Jaws now? I am using the latest jaws 20. What I had to do was shut the computer and restart and Jaws loaded at startup. Thank you for your help. Also, I am most likely getting a used Romeo Printer at Humanware. Thanks to everyone that helped me sort all this…you are all great!! Andy and Shubert



Andrew J. LaPointe, President

Friends of the Salem Council on Aging

34 Raymond Ave.

Salem, MA. 01970

Home: 978-745-4289 cell: 978-578-0185



Editor, Commission Commuter Update and the Safe Disabled Traveler Notebook

Talking Information Center

moderated Re: Finding the ip addresss of a computer?

Dan Longmore
 

Yes, just used Team viewer today.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Friday, March 6, 2020 6:10 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Is there still a team viewer remote?

That was like Jaws remote and NVDA remote, only it was going through Team Viewer.

Glenn

----- Original Message -----

From: Jessica D

Sent: Friday, March 06, 2020 3:50 PM

Subject: Re: Finding the ip addresss of a computer?

 

Hi,

Do you know how to do it? 

Can you provide exact steps? 

 

Thanks,

Jessica

 



On Mar 6, 2020, at 4:49 PM, Arkadiusz Świętnicki <nuno69a@...> wrote:



For this to work, you need public IP address, open ports and so on. It is not that easy.

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 10:19 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

Hi,

I have a computer, in outside my home, that I'd like to access, when I'm not physically near it. 

I have the remote desktop app on my iphone and ipad. 

The computer is running win10 pro, and jaws2020. 

You have to have a password on the computer you want to connect to. 

You also need internet access. 

Once that's done, open the "remote desktop connection" app, and there are several tabs. 

Under "advanced, I think it was where it asked for the server name. 

After that, it constantly asked for my password, and would not take it. 

Can anyone help? 

I'm so close to finally getting this. 

Thanks,

Jessica




On Mar 6, 2020, at 4:03 PM, Brian Vogel <britechguy@...> wrote:

Jessica,

What is it, precisely, that you're trying to accomplish here?  And using what program or instructions?

Any of a million things can ask for the things  you're asking about and it would make it much easier to help if one has the whole picture.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Finding the ip addresss of a computer?

Arkadiusz Świętnicki
 

It will, because the Remote Desktop can transmit sound normally

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Randy Barnett
Sent: Saturday, March 7, 2020 12:17 AM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Are you saying jaws wont work with remote desktop software without a remote license?

On 3/6/2020 3:15 PM, Abraham Sweiss wrote:

This is not a trivial task and has a lot of security implications.s

 

And once you get this to work, unless you have jars with the remote access license on your tablet, all you will have as an image of your computer with no sound.

Can we get more information on why remote access to your computer is needed. With this information we may be able to provide alternative solutions.

 

Thanks,abraham 


On Mar 6, 2020, at 4:19 PM, Jessica D <jldail13@...> wrote:

Hi,

I have a computer, in outside my home, that I'd like to access, when I'm not physically near it. 

I have the remote desktop app on my iphone and ipad. 

The computer is running win10 pro, and jaws2020. 

You have to have a password on the computer you want to connect to. 

You also need internet access. 

 

Once that's done, open the "remote desktop connection" app, and there are several tabs. 

 

Under "advanced, I think it was where it asked for the server name. 

After that, it constantly asked for my password, and would not take it. 

 

Can anyone help? 

I'm so close to finally getting this. 

 

Thanks,

Jessica

 



On Mar 6, 2020, at 4:03 PM, Brian Vogel <britechguy@...> wrote:

Jessica,

What is it, precisely, that you're trying to accomplish here?  And using what program or instructions?

Any of a million things can ask for the things  you're asking about and it would make it much easier to help if one has the whole picture.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: unload and reload Jaws?

David Griffith
 

 

Personally as   a feature request I would prefer that Jaws has the same behaviour as NVDA. That is, with NVDA running pressing control alt and N will close and restart NVDA in one operation without any further intervention. Jaws should do the same thing  with control alt J.

 

This NVDA feature is very useful if for any reason NVDA has stalled or speech has been lost. It clears up these problems quickly and nicely as NVDA instantly restarts itself with this forced restart.

 

In contrast if Jaws stalls you have to first of all try and shut it down and then try to re-load it. The exception to this is if Jaws itself recognises that it has crashed in which case it will sometimes restart itself  without any intervention from the user. The drawback  it that it normally takes quite a time to come to this conclusion.

Shutting down Jaws within one session in these circumstances is also not always straightforward. Occasionally I have ended up with multiple Jaws icons on my system tray as previous version have clearly failed to completely unload, even though only one instance of Jaws is talking.

 

A computer restart is normally required to remove these multiple ghost instances of Jaws.

 

I would much prefer NVDA’s  one shortcut approach  which in my experience never results in multiple versions of NVDA trying to run in the background.

 

David Griffith

 

 

 

 

 

 

Sent from Mail for Windows 10

 

From: ben
Sent: 06 March 2020 22:56
To: main@jfw.groups.io
Subject: Re: unload and reload Jaws?

 

Hi, 

 

The two ways I restart JAWS are as follows:

One, press the Windows key and the letter r to bring up the run box. Type jaws2020 and press enter. JAWS should come up talking. 

 

Two, press the windows key and the letter m to bring up the desktop. Press j for JAWS and press enter. The only thing to remember with the desktop method is if you have other things that start with j on your desktop, you might land on one of those. 

 

I hope this helps. 

 



On Mar 6, 2020, at 2:59 PM, Andrew J. LaPointe <alapointe89@...> wrote:



Hi, I was using qread and decided to unload jaws (jaws key f4.  When I wanted to reload jaws, I used control alt and j and it didn’t work.  Is there a new way of reloading Jaws now?  I am using the latest jaws 20.  What I had to do was shut the computer and restart and Jaws loaded at startup.  Thank you for your help.  Also, I am most likely getting a used Romeo Printer at Humanware.  Thanks to everyone that helped me sort all this…you are all great!!  Andy and Shubert

 

Andrew J. LaPointe, President

Friends of the Salem Council on Aging

34 Raymond Ave.

Salem, MA. 01970

Home: 978-745-4289 cell: 978-578-0185

 

Editor, Commission Commuter Update and the Safe Disabled Traveler Notebook

Talking Information Center

 

 

moderated Re: Finding the ip addresss of a computer?

Randy Barnett
 

Are you saying jaws wont work with remote desktop software without a remote license?

On 3/6/2020 3:15 PM, Abraham Sweiss wrote:
This is not a trivial task and has a lot of security implications.s

And once you get this to work, unless you have jars with the remote access license on your tablet, all you will have as an image of your computer with no sound.

Can we get more information on why remote access to your computer is needed. With this information we may be able to provide alternative solutions.

Thanks,abraham 

On Mar 6, 2020, at 4:19 PM, Jessica D <jldail13@...> wrote:

Hi,
I have a computer, in outside my home, that I'd like to access, when I'm not physically near it. 
I have the remote desktop app on my iphone and ipad. 
The computer is running win10 pro, and jaws2020. 
You have to have a password on the computer you want to connect to. 
You also need internet access. 

Once that's done, open the "remote desktop connection" app, and there are several tabs. 

Under "advanced, I think it was where it asked for the server name. 
After that, it constantly asked for my password, and would not take it. 

Can anyone help? 
I'm so close to finally getting this. 

Thanks,
Jessica



On Mar 6, 2020, at 4:03 PM, Brian Vogel <britechguy@...> wrote:

Jessica,

What is it, precisely, that you're trying to accomplish here?  And using what program or instructions?

Any of a million things can ask for the things  you're asking about and it would make it much easier to help if one has the whole picture.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Finding the ip addresss of a computer?

Abraham Sweiss
 

This is not a trivial task and has a lot of security implications.s

And once you get this to work, unless you have jars with the remote access license on your tablet, all you will have as an image of your computer with no sound.

Can we get more information on why remote access to your computer is needed. With this information we may be able to provide alternative solutions.

Thanks,abraham 

On Mar 6, 2020, at 4:19 PM, Jessica D <jldail13@...> wrote:

Hi,
I have a computer, in outside my home, that I'd like to access, when I'm not physically near it. 
I have the remote desktop app on my iphone and ipad. 
The computer is running win10 pro, and jaws2020. 
You have to have a password on the computer you want to connect to. 
You also need internet access. 

Once that's done, open the "remote desktop connection" app, and there are several tabs. 

Under "advanced, I think it was where it asked for the server name. 
After that, it constantly asked for my password, and would not take it. 

Can anyone help? 
I'm so close to finally getting this. 

Thanks,
Jessica



On Mar 6, 2020, at 4:03 PM, Brian Vogel <britechguy@...> wrote:

Jessica,

What is it, precisely, that you're trying to accomplish here?  And using what program or instructions?

Any of a million things can ask for the things  you're asking about and it would make it much easier to help if one has the whole picture.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Finding the ip addresss of a computer?

Glenn / Lenny
 


Is there still a team viewer remote?
That was like Jaws remote and NVDA remote, only it was going through Team Viewer.
Glenn

----- Original Message -----
From: Jessica D
Sent: Friday, March 06, 2020 3:50 PM
Subject: Re: Finding the ip addresss of a computer?

Hi,
Do you know how to do it? 
Can you provide exact steps? 

Thanks,
Jessica



On Mar 6, 2020, at 4:49 PM, Arkadiusz Świętnicki <nuno69a@...> wrote:



For this to work, you need public IP address, open ports and so on. It is not that easy.

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 10:19 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

Hi,

I have a computer, in outside my home, that I'd like to access, when I'm not physically near it. 

I have the remote desktop app on my iphone and ipad. 

The computer is running win10 pro, and jaws2020. 

You have to have a password on the computer you want to connect to. 

You also need internet access. 

Once that's done, open the "remote desktop connection" app, and there are several tabs. 

Under "advanced, I think it was where it asked for the server name. 

After that, it constantly asked for my password, and would not take it. 

Can anyone help? 

I'm so close to finally getting this. 

Thanks,

Jessica



On Mar 6, 2020, at 4:03 PM, Brian Vogel <britechguy@...> wrote:

Jessica,

What is it, precisely, that you're trying to accomplish here?  And using what program or instructions?

Any of a million things can ask for the things  you're asking about and it would make it much easier to help if one has the whole picture.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated JAWS spell

Don Walls
 

Well friends, I’m having an interesting week – moved from a “dumb” phone to my first IPhone and also updated from JAWS 17 to JAWS 2020.  My new JAWS tells me I have “misspelling” on various words – probably American rather than my Canadian spelling.  I’ve gone to the settings centre but can’t find where to silence such prompts and sound effects.  Any help gratefully received!
 
Don

moderated Re: unload and reload Jaws?

ben <swigjr23@...>
 

Hi, 

The two ways I restart JAWS are as follows:
One, press the Windows key and the letter r to bring up the run box. Type jaws2020 and press enter. JAWS should come up talking. 

Two, press the windows key and the letter m to bring up the desktop. Press j for JAWS and press enter. The only thing to remember with the desktop method is if you have other things that start with j on your desktop, you might land on one of those. 

I hope this helps. 


On Mar 6, 2020, at 2:59 PM, Andrew J. LaPointe <alapointe89@...> wrote:



Hi, I was using qread and decided to unload jaws (jaws key f4.  When I wanted to reload jaws, I used control alt and j and it didn’t work.  Is there a new way of reloading Jaws now?  I am using the latest jaws 20.  What I had to do was shut the computer and restart and Jaws loaded at startup.  Thank you for your help.  Also, I am most likely getting a used Romeo Printer at Humanware.  Thanks to everyone that helped me sort all this…you are all great!!  Andy and Shubert

 

Andrew J. LaPointe, President

Friends of the Salem Council on Aging

34 Raymond Ave.

Salem, MA. 01970

Home: 978-745-4289 cell: 978-578-0185

 

Editor, Commission Commuter Update and the Safe Disabled Traveler Notebook

Talking Information Center

 

moderated Re: Creating website with JAWS

Lino Morales
 

There is also a program called Druple. Don’t know how accessible it is with JAWS.

 

                                                                                                                                                                                                                                                                                                                               

                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

                                                                                                               

 

From: Richard Turner
Sent: Friday, March 6, 2020 11:17 AM
To: main@jfw.groups.io
Subject: Re: Creating website with JAWS

 

The first step if you want to do it yourself, rather than depending on a program that uses pre-written templates is to learn HTML code at whatever level you wish.

NotePad will only be useful if you know the coding required.

There are tons of online tutorials to learn how to create websites.

I did it so long ago that I don't have specific ones in mind.

I think NotePad++ may have some templates, but someone else I'm sure will chime in.

Enjoy,

 



Richard

"There's a nap for that." 

Check out my web site at: www.turner42.com

 



On Mar 6, 2020, at 7:02 AM, Thabo Baseki <THAB0.BASEKI@...> wrote:



 Good day friends!

 

Thank you for adding me to the mailing list. This is my first post to the group, and I am excited, I can have my inquiries head. 

 

 I have never created a website before, and I want to learn how to do it. Where can I start? Is the place accessible with jars? Some people were telling me that I should use notepad, how is that effective?

 

Thank you for all the suggestions in advance!

 

Best regards

 

 

 

Thabo

 

 

 

JAWS certified-2020

http://www.freedomscientific.com/Services/TrainingAndCertification/Certification

 

moderated Re: Finding the ip addresss of a computer?

John Covici
 

This is a very bad idea, because of bugs in Windows, an attacker could
take over your computer this way. In order to do this properly, you
need a vpn server at your home. Also, your ip address can change at
any time, unless you have a static ip address which most people do not
have.

On Fri, 06 Mar 2020 16:50:46 -0500,
Jessica D wrote:

[1 <text/plain; utf-8 (quoted-printable)>]
Hi,
Do you know how to do it?
Can you provide exact steps?

Thanks,
Jessica
On Mar 6, 2020, at 4:49 PM, Arkadiusz Świętnicki <nuno69a@...> wrote:


For this to work, you need public IP address, open ports and so on. It is not that easy.

Pozdrawiam,
Arkadiusz Świętnicki AKA. Nuno

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 10:19 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

Hi,
I have a computer, in outside my home, that I'd like to access, when I'm not physically near it.
I have the remote desktop app on my iphone and ipad.
The computer is running win10 pro, and jaws2020.
You have to have a password on the computer you want to connect to.
You also need internet access.

Once that's done, open the "remote desktop connection" app, and there are several tabs.

Under "advanced, I think it was where it asked for the server name.
After that, it constantly asked for my password, and would not take it.

Can anyone help?
I'm so close to finally getting this.

Thanks,
Jessica




On Mar 6, 2020, at 4:03 PM, Brian Vogel <@britechguy> wrote:

Jessica,

What is it, precisely, that you're trying to accomplish here? And using what program or instructions?

Any of a million things can ask for the things you're asking about and it would make it much easier to help if one has the whole picture.
--
Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363
Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.
~ Joshua Liebman


[2 <text/html; utf-8 (quoted-printable)>]
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici wb2una
covici@...

moderated Re: unload and reload Jaws?

Randy Barnett
 

on the desktop find the jaws icon and then press alt plus enter. now tab to the shortcut fieled and press j. now tab to OK and press it. alt ctrl j will start jaws.

On 3/6/2020 1:20 PM, Andrew J. LaPointe wrote:
How do you refine the hot keys alt control and j? I also tried the windows key r and typed jaws2020 and that worked...thank you to the reply that gave me that information.. I just thought that the hot keys would be quicker Thank you Andy and Shubert

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of netbat66
Sent: Friday, March 6, 2020 4:10 PM
To: main@jfw.groups.io
Subject: Re: unload and reload Jaws?

jaws key and j.
control alt j is the shortcut keys to load jaws from the desktop icon. when jaws is installed this shortcut is removed and you have to re define it again.
then you will be able to either shortcuts to bring up the jaws dialog to quit the program.


-----Original Message-----
From: Andrew J. LaPointe
Sent: Friday, March 06, 2020 12:59 PM
To: jfw@groups.io
Subject: unload and reload Jaws?



Hi, I was using qread and decided to unload jaws (jaws key f4. When I wanted
to reload jaws, I used control alt and j and it didn’t work. Is there a new
way of reloading Jaws now? I am using the latest jaws 20. What I had to do
was shut the computer and restart and Jaws loaded at startup. Thank you for
your help. Also, I am most likely getting a used Romeo Printer at Humanware.
Thanks to everyone that helped me sort all this…you are all great!! Andy and
Shubert



Andrew J. LaPointe, President

Friends of the Salem Council on Aging

34 Raymond Ave.

Salem, MA. 01970

Home: 978-745-4289 cell: 978-578-0185



Editor, Commission Commuter Update and the Safe Disabled Traveler Notebook

Talking Information Center









moderated Re: Finding the ip addresss of a computer?

Arkadiusz Świętnicki
 

I need more information to help uou. I need your ISP name, router model ETC. Then we can work. However this is getting way beyond the JAWS topics. Can I write you privately?

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 10:51 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi,

Do you know how to do it? 

Can you provide exact steps? 

 

Thanks,

Jessica

 



On Mar 6, 2020, at 4:49 PM, Arkadiusz Świętnicki <nuno69a@...> wrote:



For this to work, you need public IP address, open ports and so on. It is not that easy.

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 10:19 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi,

I have a computer, in outside my home, that I'd like to access, when I'm not physically near it. 

I have the remote desktop app on my iphone and ipad. 

The computer is running win10 pro, and jaws2020. 

You have to have a password on the computer you want to connect to. 

You also need internet access. 

 

Once that's done, open the "remote desktop connection" app, and there are several tabs. 

 

Under "advanced, I think it was where it asked for the server name. 

After that, it constantly asked for my password, and would not take it. 

 

Can anyone help? 

I'm so close to finally getting this. 

 

Thanks,

Jessica

 




On Mar 6, 2020, at 4:03 PM, Brian Vogel <britechguy@...> wrote:

Jessica,

What is it, precisely, that you're trying to accomplish here?  And using what program or instructions?

Any of a million things can ask for the things  you're asking about and it would make it much easier to help if one has the whole picture.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Finding the ip addresss of a computer?

Randy Barnett
 

On 3/6/2020 12:07 PM, Jessica D wrote:
Hi,
So what do I do if I want to access it outside the network?
Thanks,
Jessica

 

From: main@jfw.groups.io on behalf of Glenn / Lenny <glennervin@...>
Sent: Friday, March 6, 2020 2:45 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?
 
Of course that is only the internal IP address, not useful if it is needed from somewhere outside the LAN.
Glenn
----- Original Message -----
Sent: Friday, March 06, 2020 1:42 PM
Subject: Re: Finding the ip addresss of a computer?

Just type ipconfig in the command line and it will give you all the relevant info for your network.

On 3/6/2020 8:10 AM, Jessica D wrote:
Hi
Thanks, now it wants a domain/username, so how do I find that? 

Thanks, Jessica



On Mar 6, 2020, at 11:03 AM, Brian Vogel <britechguy@...> wrote:

I presume you're looking for the IP address on your local area network.  I find it much easier to do this on the machine where I want it by running the following command sequence under command prompt:

ipconfig | findstr IPv4

The IPv4 must be entered with the first two characters upper case, and the v in lower case, for this to work correctly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Finding the ip addresss of a computer?

Jessica D
 

Hi,
Do you know how to do it? 
Can you provide exact steps? 

Thanks,
Jessica



On Mar 6, 2020, at 4:49 PM, Arkadiusz Świętnicki <nuno69a@...> wrote:



For this to work, you need public IP address, open ports and so on. It is not that easy.

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 10:19 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi,

I have a computer, in outside my home, that I'd like to access, when I'm not physically near it. 

I have the remote desktop app on my iphone and ipad. 

The computer is running win10 pro, and jaws2020. 

You have to have a password on the computer you want to connect to. 

You also need internet access. 

 

Once that's done, open the "remote desktop connection" app, and there are several tabs. 

 

Under "advanced, I think it was where it asked for the server name. 

After that, it constantly asked for my password, and would not take it. 

 

Can anyone help? 

I'm so close to finally getting this. 

 

Thanks,

Jessica

 



On Mar 6, 2020, at 4:03 PM, Brian Vogel <britechguy@...> wrote:

Jessica,

What is it, precisely, that you're trying to accomplish here?  And using what program or instructions?

Any of a million things can ask for the things  you're asking about and it would make it much easier to help if one has the whole picture.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: Finding the ip addresss of a computer?

Arkadiusz Świętnicki
 

For this to work, you need public IP address, open ports and so on. It is not that easy.

 

Pozdrawiam,

Arkadiusz Świętnicki AKA. Nuno

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Friday, March 6, 2020 10:19 PM
To: main@jfw.groups.io
Subject: Re: Finding the ip addresss of a computer?

 

Hi,

I have a computer, in outside my home, that I'd like to access, when I'm not physically near it. 

I have the remote desktop app on my iphone and ipad. 

The computer is running win10 pro, and jaws2020. 

You have to have a password on the computer you want to connect to. 

You also need internet access. 

 

Once that's done, open the "remote desktop connection" app, and there are several tabs. 

 

Under "advanced, I think it was where it asked for the server name. 

After that, it constantly asked for my password, and would not take it. 

 

Can anyone help? 

I'm so close to finally getting this. 

 

Thanks,

Jessica

 



On Mar 6, 2020, at 4:03 PM, Brian Vogel <britechguy@...> wrote:

Jessica,

What is it, precisely, that you're trying to accomplish here?  And using what program or instructions?

Any of a million things can ask for the things  you're asking about and it would make it much easier to help if one has the whole picture.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Tolerance is the positive and cordial effort to understand another's beliefs, practices, and habits without necessarily sharing or accepting them.

        ~ Joshua Liebman

moderated Re: unload and reload Jaws?

Milton Ota
 

Another way is get to your desktop and hopefully JAWS 2020 is the only icon on your desktop that begins with the letter and type/hit the letter J and press enter.

 

You might want to check to see if you are missing the shortcut keystroke for JAWS 2020. I’ll let someone else explain how to get there and do it.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Bentley
Sent: Friday, March 6, 2020 3:08 PM
To: main@jfw.groups.io
Subject: Re: unload and reload Jaws?

 

Hi,

 

Instead of rebooting your PC.  Just go in to the Windows run menu by typing, Windows key+R.  Then type, jaws2020, and hit enter.  This usually brings Jaws back up when Alt control J doesn’t work.

 

James B

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Andrew J. LaPointe
Sent: Friday, March 6, 2020 2:59 PM
To: jfw@groups.io
Subject: unload and reload Jaws?

 

Hi, I was using qread and decided to unload jaws (jaws key f4.  When I wanted to reload jaws, I used control alt and j and it didn’t work.  Is there a new way of reloading Jaws now?  I am using the latest jaws 20.  What I had to do was shut the computer and restart and Jaws loaded at startup.  Thank you for your help.  Also, I am most likely getting a used Romeo Printer at Humanware.  Thanks to everyone that helped me sort all this…you are all great!!  Andy and Shubert

 

Andrew J. LaPointe, President

Friends of the Salem Council on Aging

34 Raymond Ave.

Salem, MA. 01970

Home: 978-745-4289 cell: 978-578-0185

 

Editor, Commission Commuter Update and the Safe Disabled Traveler Notebook

Talking Information Center

 

moderated Re: unload and reload Jaws?

David Diamond
 

I just set up the shortcut and if JAWS freezes up, I close it then open it again.  That usually fixes the problem and can be done pretty much wherever you are on the screen.