Date   
moderated Re: Jaws 2020 lag with Outlook 365

Rick Mladek
 

Hi, The preview option is not the issue. I have OUtlook 2019 with Jaws 2020 with all updates current and Windows 10. Definitely lags

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jason White via Groups.Io
Sent: Monday, January 27, 2020 7:42 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2020 lag with Outlook 365

 

Have you tried turning off the preview pane in Outlook?

 

From: <main@jfw.groups.io> on behalf of "Norma A. Boge" <naboge@...>
Reply-To: <main@jfw.groups.io>
Date: Monday, January 27, 2020 at 16:52
To: <main@jfw.groups.io>
Subject: Jaws 2020 lag with Outlook 365

 

Hi group,

 

As I await a response from Vispero support, I’m wondering if anyone is experiencing the following:

 

I have noticed that the lag while using Outlook 365 with Jaws 2020 is even worse than with Jaws 2019. Arrowing through a message list, Jaws simply stops speaking. I can read the title of the window but that’s it. Then after 3-4 seconds I am able to proceed normally through the list. And it takes about 5 seconds before I can type a reply to a message.

A few months ago I asked about this lag while in a Outlook webinar with the Microsoft accessibility group. They acknowledged the problem but that was about all they said. I can hardly wait to see what Vispero’s take is.

 

Helpful feedback welcome.

Norma

moderated Re: Jaws 2020 lag with Outlook 365

Jason White
 

Have you tried turning off the preview pane in Outlook?

 

From: <main@jfw.groups.io> on behalf of "Norma A. Boge" <naboge@...>
Reply-To: <main@jfw.groups.io>
Date: Monday, January 27, 2020 at 16:52
To: <main@jfw.groups.io>
Subject: Jaws 2020 lag with Outlook 365

 

Hi group,

 

As I await a response from Vispero support, I’m wondering if anyone is experiencing the following:

 

I have noticed that the lag while using Outlook 365 with Jaws 2020 is even worse than with Jaws 2019. Arrowing through a message list, Jaws simply stops speaking. I can read the title of the window but that’s it. Then after 3-4 seconds I am able to proceed normally through the list. And it takes about 5 seconds before I can type a reply to a message.

A few months ago I asked about this lag while in a Outlook webinar with the Microsoft accessibility group. They acknowledged the problem but that was about all they said. I can hardly wait to see what Vispero’s take is.

 

Helpful feedback welcome.

Norma

moderated Re: convert webpage containing several tables into 1 excel spreadsheet?

Jessica D
 

Hi again Alan,

 

It worked, but there are a few oddities.

 

If I want it to work in my flashcard app, the top line needs to say “side 1 in A1, and “side 2” in b1.

The remainder of the items also need to take this format.

 

Is there an easy way to do this?

 

I’ll attach the file so you can see how it looks now.

 

Thanks,

 

Jessica

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Alan Lemly
Sent: Monday, January 27, 2020 5:34 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

You might try saving the web page as a single html file and opening that file in Excel and see what you get.

 

Alan Lemly

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Monday, January 27, 2020 2:14 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

That is a bit more involved than what could be handled easily via Email.

What is the web page?

I'll see if I can help with this.

 

 

 

Richard

"Reality is the leading cause of stress for those who are in touch with it." 

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

 

 

On Jan 27, 2020, at 10:46 AM, Jessica D <jldail13@...> wrote:



Hi,

I know this isn’t directly related to jaws, but I’m using jaws 2020.

 

I’d like an efficient way to learn the commands for the Focus line of braille displays, since those items are covered on the certification exam.

 

I found a page that contains several tables of these commands, and would like to get all this data into a spreadsheet.

 

Does anyone know how to do this?

 

Thanks,

 

Jessica

 

moderated Re: JAWS won't start after sign-in

Gmail Jonas
 

Did you try to add Jaws to your startup folder?

If not you may try to create a CMD to start Jaws and add that CMD to your startup!

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dan Longmore
Sent: Monday, January 27, 2020 6:47 AM
To: main@jfw.groups.io
Subject: Re: JAWS won't start after sign-in

 

I’m glad you don’t have a problem on your system, but do realize that every system is a little different and on some systems this is an issue which Freedom Scientific is aware of.

moderated Re: keystroke to get to Office Quick Access Toolbar?

Ann Byrne
 

In theory, pressing alt+1 should take you to the first item in the QAT, alt+2 to the second, etc. My experience is that that only works sometimes.

At 05:10 PM 1/27/2020, you wrote:
A JAWS webinar I listened to a while back talked about adding icons to the Quick Access Toolbar in Excel. I did this for the sort button, which I regularly use, Now I wonder if there is a quick way to get to that QAT toolbar other than tabbing through all the ribbons. I figure there must be if it was worth pointing out on a JAWS webinar, but I did not write any notes on how to do it.

Robin
Using Windows 10, Office 2016 and JAWS 2019

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

moderated Re: convert webpage containing several tables into 1 excel spreadsheet?

Jessica D
 

Hi Alan, 
I had no idea excel could open html files. 
I thought that was just a web browser format? 

Thanks,
Jessica



On Jan 27, 2020, at 5:33 PM, Alan Lemly <walemly@...> wrote:



You might try saving the web page as a single html file and opening that file in Excel and see what you get.

 

Alan Lemly

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Monday, January 27, 2020 2:14 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

That is a bit more involved than what could be handled easily via Email.

What is the web page?

I'll see if I can help with this.

 

 

 

Richard

"Reality is the leading cause of stress for those who are in touch with it." 

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

 



On Jan 27, 2020, at 10:46 AM, Jessica D <jldail13@...> wrote:



Hi,

I know this isn’t directly related to jaws, but I’m using jaws 2020.

 

I’d like an efficient way to learn the commands for the Focus line of braille displays, since those items are covered on the certification exam.

 

I found a page that contains several tables of these commands, and would like to get all this data into a spreadsheet.

 

Does anyone know how to do this?

 

Thanks,

 

Jessica

 

moderated Re: keystroke to get to Office Quick Access Toolbar?

Dean Martineau
 

Press alt, then up arrow, then fight arrow across your buttons.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: Monday, January 27, 2020 6:10 PM
To: JFW List (jfw@groups.io) <jfw@groups.io>
Subject: keystroke to get to Office Quick Access Toolbar?

 

A JAWS webinar I listened to a while back talked about adding icons to the Quick Access Toolbar in Excel.  I did this for the sort button, which I regularly use, Now I wonder if there is a quick way to get to that QAT toolbar other than tabbing through all the ribbons.  I figure there must be if it was worth pointing out on a JAWS webinar, but I did not write any notes on how to do it.

 

Robin

Using Windows 10, Office 2016 and JAWS 2019

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

moderated Re: keystroke to get to Office Quick Access Toolbar?

CathyAnne Murtha
 

Press ALT to enter Command Mode. Press UP ARROW once to focus in the QAT.

Press RIGHT and LEFT ARROW to navigate the QAT commands.

Each is associated with a number. Use these numbers with ALT to execute the command.

The first QAT command is ALT-NUMBER ROW 1, the second is ALT-NUMBER ROW 2, etc.

CathyAnne

---
CathyAnne Murtha
Access Technology Institute
www.blind.training
cathy@...
(520) 955-6611

CathyAnne Murtha
CEO
Access Technology Institute, LLC
www.blind.training
cathy@...
Phone: (520) 955-6611



On Mon, Jan 27, 2020 at 4:10 PM -0700, "Van Lant, Robin via Groups.Io" <Robin_Van_Lant@...> wrote:

A JAWS webinar I listened to a while back talked about adding icons to the Quick Access Toolbar in Excel.  I did this for the sort button, which I regularly use, Now I wonder if there is a quick way to get to that QAT toolbar other than tabbing through all the ribbons.  I figure there must be if it was worth pointing out on a JAWS webinar, but I did not write any notes on how to do it.

 

Robin

Using Windows 10, Office 2016 and JAWS 2019

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

moderated keystroke to get to Office Quick Access Toolbar?

Van Lant, Robin
 

A JAWS webinar I listened to a while back talked about adding icons to the Quick Access Toolbar in Excel.  I did this for the sort button, which I regularly use, Now I wonder if there is a quick way to get to that QAT toolbar other than tabbing through all the ribbons.  I figure there must be if it was worth pointing out on a JAWS webinar, but I did not write any notes on how to do it.

 

Robin

Using Windows 10, Office 2016 and JAWS 2019

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

moderated Re: convert webpage containing several tables into 1 excel spreadsheet?

 

You might try saving the web page as a single html file and opening that file in Excel and see what you get.

 

Alan Lemly

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Monday, January 27, 2020 2:14 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

That is a bit more involved than what could be handled easily via Email.

What is the web page?

I'll see if I can help with this.

 

 

 

Richard

"Reality is the leading cause of stress for those who are in touch with it." 

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

 



On Jan 27, 2020, at 10:46 AM, Jessica D <jldail13@...> wrote:



Hi,

I know this isn’t directly related to jaws, but I’m using jaws 2020.

 

I’d like an efficient way to learn the commands for the Focus line of braille displays, since those items are covered on the certification exam.

 

I found a page that contains several tables of these commands, and would like to get all this data into a spreadsheet.

 

Does anyone know how to do this?

 

Thanks,

 

Jessica

 

moderated Jaws 2020 lag with Outlook 365

Norma A. Boge
 

Hi group,

 

As I await a response from Vispero support, I’m wondering if anyone is experiencing the following:

 

I have noticed that the lag while using Outlook 365 with Jaws 2020 is even worse than with Jaws 2019. Arrowing through a message list, Jaws simply stops speaking. I can read the title of the window but that’s it. Then after 3-4 seconds I am able to proceed normally through the list. And it takes about 5 seconds before I can type a reply to a message.

A few months ago I asked about this lag while in a Outlook webinar with the Microsoft accessibility group. They acknowledged the problem but that was about all they said. I can hardly wait to see what Vispero’s take is.

 

Helpful feedback welcome.

Norma

moderated Re: how to drag and drop on websites?

Jessica D
 

Hi,

Yeah, try that, and let me know how that works.

 

Thanks,

 

Jessica

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brent Harding
Sent: Monday, January 27, 2020 4:47 PM
To: main@jfw.groups.io
Subject: Re: how to drag and drop on websites?

 

Hmmm, I don't have one of the new compputers with touch screens built in. I wonder if I could fill it out on my iPhone, as Apple seems to have a pretty good interface for this? In my case, I need to reorder a list of about 16 things this way.

 

----- Original Message -----

From: Jessica D

Sent: Monday, January 27, 2020 3:38 PM

Subject: Re: how to drag and drop on websites?

 

Hi,

I had to drag a button, and I used my touch-screen. 

 

Thanks,

Jessica

 



On Jan 27, 2020, at 4:15 PM, Brent Harding <brent@...> wrote:



Hi there! I am wondering, how one can deal with drag and drop stuff on the web when using Jaws? For instance, with this one thing I was trying to deal with, it asks you to drag a list of things in order from most important to least important. I tried the lock mouse button command to try to do it, but then the arrow keys won't read where I'm moving to. Is there any way around this kind of thing besides getting someone to do it for me?

Thanks

 

moderated Re: how to drag and drop on websites?

Brent Harding
 


Hmmm, I don't have one of the new compputers with touch screens built in. I wonder if I could fill it out on my iPhone, as Apple seems to have a pretty good interface for this? In my case, I need to reorder a list of about 16 things this way.
 

----- Original Message -----
From: Jessica D
Sent: Monday, January 27, 2020 3:38 PM
Subject: Re: how to drag and drop on websites?

Hi,
I had to drag a button, and I used my touch-screen. 

Thanks,
Jessica



On Jan 27, 2020, at 4:15 PM, Brent Harding <brent@...> wrote:


Hi there! I am wondering, how one can deal with drag and drop stuff on the web when using Jaws? For instance, with this one thing I was trying to deal with, it asks you to drag a list of things in order from most important to least important. I tried the lock mouse button command to try to do it, but then the arrow keys won't read where I'm moving to. Is there any way around this kind of thing besides getting someone to do it for me?
Thanks
 

moderated Re: how to drag and drop on websites?

Jessica D
 

Hi,
I had to drag a button, and I used my touch-screen. 

Thanks,
Jessica



On Jan 27, 2020, at 4:15 PM, Brent Harding <brent@...> wrote:


Hi there! I am wondering, how one can deal with drag and drop stuff on the web when using Jaws? For instance, with this one thing I was trying to deal with, it asks you to drag a list of things in order from most important to least important. I tried the lock mouse button command to try to do it, but then the arrow keys won't read where I'm moving to. Is there any way around this kind of thing besides getting someone to do it for me?
Thanks
 

moderated how to drag and drop on websites?

Brent Harding
 

Hi there! I am wondering, how one can deal with drag and drop stuff on the web when using Jaws? For instance, with this one thing I was trying to deal with, it asks you to drag a list of things in order from most important to least important. I tried the lock mouse button command to try to do it, but then the arrow keys won't read where I'm moving to. Is there any way around this kind of thing besides getting someone to do it for me?
Thanks
 

moderated Re: convert webpage containing several tables into 1 excel spreadsheet?

Richard Turner
 

That is a bit more involved than what could be handled easily via Email.
What is the web page?
I'll see if I can help with this.




Richard
"Reality is the leading cause of stress for those who are in touch with it." 
-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner


On Jan 27, 2020, at 10:46 AM, Jessica D <jldail13@...> wrote:



Hi,

I know this isn’t directly related to jaws, but I’m using jaws 2020.

 

I’d like an efficient way to learn the commands for the Focus line of braille displays, since those items are covered on the certification exam.

 

I found a page that contains several tables of these commands, and would like to get all this data into a spreadsheet.

 

Does anyone know how to do this?

 

Thanks,

 

Jessica

 

moderated convert webpage containing several tables into 1 excel spreadsheet?

Jessica D
 

Hi,

I know this isn’t directly related to jaws, but I’m using jaws 2020.

 

I’d like an efficient way to learn the commands for the Focus line of braille displays, since those items are covered on the certification exam.

 

I found a page that contains several tables of these commands, and would like to get all this data into a spreadsheet.

 

Does anyone know how to do this?

 

Thanks,

 

Jessica

 

moderated Re: reclassing list views in jaws?

Mike B
 


Just to point out that there are 2 Miscellaneous folders in the Settings Center.  1 is a sub-folder of, Web / HTML / PDFs, but the 2nd Miscellaneous folder is the 2nd from the bottom of the folder list, and this is where the MSAA option is located.  This is an application specific setting only.

Take care.  Mike.  Sent from my iBarstool.

----- Original Message -----
Sent: Monday, January 27, 2020 7:34 AM
Subject: Re: reclassing list views in jaws?

One other option before you look at scripting:
In the JAWS settings center, there is an option to force JAWS to use MSAA to interpret list views. I believe this is in the misc. section. So there is a slight possibility that if you toggle this for your application it will perform better.

moderated Re: reclassing list views in jaws?

Cohn, Jonathan
 

One other option before you look at scripting:
In the JAWS settings center, there is an option to force JAWS to use MSAA to interpret list views. I believe this is in the misc. section. So there is a slight possibility that if you toggle this for your application it will perform better.

moderated Re: JAWS won't start after sign-in

Jason White
 

I once experienced this on a Windows 7 system. According to Freedom Scientific support, it was probably due to group policy settings (the machine was part of an Active Directory domain).

 

The solution was to copy the desktop shortcut for JAWS to shell:startup (which is where the user’s startup programs reside).

 

From: <main@jfw.groups.io> on behalf of Dan Longmore <danlongmore44@...>
Reply-To: <main@jfw.groups.io>
Date: Monday, January 27, 2020 at 07:46
To: <main@jfw.groups.io>
Subject: Re: JAWS won't start after sign-in

 

I’m glad you don’t have a problem on your system, but do realize that every system is a little different and on some systems this is an issue which Freedom Scientific is aware of.