Date   
moderated Re: Seeking feedback on 40 and 80 cell displays

Rayn Darren
 

Thanks for the feedback. I'm leaning towards 80 cells as well. a whole line really is appealing.

On 1/27/2020 5:45 PM, Richard Turner wrote:
The programmers I know use an 80 cell display so they don’t have to worry about the line length.
I know people who are happy with both the Humanware 80 and the Focus 80.
The Focus 5th generation 80 I think has some extra keys that can be programmed but I don’t know which ones or exactly how to do that
The Focus 80 also has the 8 braille input keys if that matters.
They are only about $200 difference in price.
Both are pushing close to $8,000.

If you have any local vendors that carry one or the other, you ought to request a demonstration.

HTH,
Richard

🖖 Live long and prosper


Check out my web site at: www.turner42.com<http://www.turner42.com/>

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rayn Darren
Sent: Monday, January 27, 2020 5:30 PM
To: main@jfw.groups.io
Subject: Seeking feedback on 40 and 80 cell displays


Greetings fellow Jaws users!

I'm a programmer and I'm in need of a new braille display. I currently have a Polaris and am unable to pair it to my computer due to technical issues with the unit. Therefore I'm in need of a new display, only a display this time as I don't make use of the other functions that come with a note-taking unit. To that end, I come to you fine people in hopes that someone will have some insight on displays.

I'm looking for feedback on 40 or 80 cell displays. I think perhaps the 80 cells will be too long for me, but since I need to read everything and every dot counts, 80 just might be what I need to be effective. I've pretty much narrowed it to the BI/Brailliant or Focus models, but if anyone uses something else I'd gladly consider it as well.

Thank you all in advance,

Sarah



moderated Re: Seeking feedback on 40 and 80 cell displays

Rayn Darren
 

Thanks for the feedback. Durable is very good since the cat has a thing for keyboards!

On 1/27/2020 7:00 PM, David Csercsics wrote:
I have a BI 40 and it works quite well for programming. It's also very portable. I have found the cells to be very durable. It's also good for reading long documents quickly, so you may have joy with it as well.



moderated Re: Seeking feedback on 40 and 80 cell displays

Rayn Darren
 

Thanks for the feedback.

On 1/27/2020 7:17 PM, JM Casey wrote:
The Focus 40 has the keys etc, too.

I mean, hell, if you have access to an 80 cell display and enough room on your desk….why wouldn’t you get one?

I have recently acquried both a used Focus 40 and an old Brailliant 80 display; the 80 cell display makes my desk a bit cramped and it has power and dot issues, but were it not for those things, I’d probably use it. I think especially for programmers being able to look at a single, lengthy line of text input would be pretty beneficial.




From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: January 27, 2020 8:45 PM
To: main@jfw.groups.io
Subject: Re: Seeking feedback on 40 and 80 cell displays


The programmers I know use an 80 cell display so they don’t have to worry about the line length.

I know people who are happy with both the Humanware 80 and the Focus 80.

The Focus 5th generation 80 I think has some extra keys that can be programmed but I don’t know which ones or exactly how to do that

The Focus 80 also has the 8 braille input keys if that matters.

They are only about $200 difference in price.

Both are pushing close to $8,000.


If you have any local vendors that carry one or the other, you ought to request a demonstration.


HTH,

Richard


🖖 Live long and prosper



Check out my web site at: <http://www.turner42.com/> www.turner42.com


From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of Rayn Darren
Sent: Monday, January 27, 2020 5:30 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Seeking feedback on 40 and 80 cell displays


Greetings fellow Jaws users!

I'm a programmer and I'm in need of a new braille display. I currently have a Polaris and am unable to pair it to my computer due to technical issues with the unit. Therefore I'm in need of a new display, only a display this time as I don't make use of the other functions that come with a note-taking unit. To that end, I come to you fine people in hopes that someone will have some insight on displays.

I'm looking for feedback on 40 or 80 cell displays. I think perhaps the 80 cells will be too long for me, but since I need to read everything and every dot counts, 80 just might be what I need to be effective. I've pretty much narrowed it to the BI/Brailliant or Focus models, but if anyone uses something else I'd gladly consider it as well.

Thank you all in advance,

Sarah






moderated Re: Seeking feedback on 40 and 80 cell displays

JM Casey
 

The Focus 40 has the keys etc, too.

I mean, hell, if you have access to an 80 cell display and enough room on your desk….why wouldn’t you get one?

I have recently acquried both a used Focus 40 and an old Brailliant 80 display; the 80 cell display makes my desk a bit cramped and it has power and dot issues, but were it not for those things, I’d probably use it. I think especially for programmers being able to look at a single, lengthy line of text input would be pretty beneficial.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: January 27, 2020 8:45 PM
To: main@jfw.groups.io
Subject: Re: Seeking feedback on 40 and 80 cell displays

 

The programmers I know use an 80 cell display so they don’t have to worry about the line length.

I know people who are happy with both the Humanware 80 and the Focus 80.

The Focus 5th generation 80 I think has some extra keys that can be programmed but I don’t know which ones or exactly how to do that

The Focus 80 also has the 8 braille input keys if that matters.

They are only about $200 difference in price.

Both are pushing close to $8,000.

 

If you have any local vendors that carry one or the other, you ought to request a demonstration.

 

HTH,

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rayn Darren
Sent: Monday, January 27, 2020 5:30 PM
To: main@jfw.groups.io
Subject: Seeking feedback on 40 and 80 cell displays

 

Greetings fellow Jaws users!

I'm a programmer and I'm in need of a new braille display. I currently have a Polaris and am unable to pair it to my computer due to technical issues with the unit. Therefore I'm in need of a new display, only a display this time as I don't make use of the other functions that come with a note-taking unit. To that end, I come to you fine people in hopes that someone will have some insight on displays.

I'm looking for feedback on 40 or 80 cell displays. I think perhaps the 80 cells will be too long for me, but since I need to read everything and every dot counts, 80 just might be what I need to be effective.  I've pretty much narrowed it to the BI/Brailliant or Focus models, but if anyone uses something else I'd gladly consider it as well.

Thank you all in advance,

Sarah

 

moderated Re: Seeking feedback on 40 and 80 cell displays

David Csercsics
 

I have a BI 40 and it works quite well for programming. It's also very portable. I have found the cells to be very durable. It's also good for reading long documents quickly, so you may have joy with it as well.

moderated Re: convert webpage containing several tables into 1 excel spreadsheet?

 

Hi Jessica,

 

No, Microsoft Excel and Word can both open html files. I'm not sure what you'll get since it's dependent on the website html saved to your computer but I've successfully opened a basic website page mainly consisting of a table of information in Excel.

 

Alan

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jessica D
Sent: Monday, January 27, 2020 6:02 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

Hi Alan, 

I had no idea excel could open html files. 

I thought that was just a web browser format? 

 

Thanks,

Jessica

 



On Jan 27, 2020, at 5:33 PM, Alan Lemly <walemly@...> wrote:



You might try saving the web page as a single html file and opening that file in Excel and see what you get.

 

Alan Lemly

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Monday, January 27, 2020 2:14 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

That is a bit more involved than what could be handled easily via Email.

What is the web page?

I'll see if I can help with this.

 

 

 

Richard

"Reality is the leading cause of stress for those who are in touch with it." 

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

 




On Jan 27, 2020, at 10:46 AM, Jessica D <jldail13@...> wrote:



Hi,

I know this isn’t directly related to jaws, but I’m using jaws 2020.

 

I’d like an efficient way to learn the commands for the Focus line of braille displays, since those items are covered on the certification exam.

 

I found a page that contains several tables of these commands, and would like to get all this data into a spreadsheet.

 

Does anyone know how to do this?

 

Thanks,

 

Jessica

 

moderated Re: Seeking feedback on 40 and 80 cell displays

Richard Turner
 

The programmers I know use an 80 cell display so they don’t have to worry about the line length.

I know people who are happy with both the Humanware 80 and the Focus 80.

The Focus 5th generation 80 I think has some extra keys that can be programmed but I don’t know which ones or exactly how to do that

The Focus 80 also has the 8 braille input keys if that matters.

They are only about $200 difference in price.

Both are pushing close to $8,000.

 

If you have any local vendors that carry one or the other, you ought to request a demonstration.

 

HTH,

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rayn Darren
Sent: Monday, January 27, 2020 5:30 PM
To: main@jfw.groups.io
Subject: Seeking feedback on 40 and 80 cell displays

 

Greetings fellow Jaws users!

I'm a programmer and I'm in need of a new braille display. I currently have a Polaris and am unable to pair it to my computer due to technical issues with the unit. Therefore I'm in need of a new display, only a display this time as I don't make use of the other functions that come with a note-taking unit. To that end, I come to you fine people in hopes that someone will have some insight on displays.

I'm looking for feedback on 40 or 80 cell displays. I think perhaps the 80 cells will be too long for me, but since I need to read everything and every dot counts, 80 just might be what I need to be effective.  I've pretty much narrowed it to the BI/Brailliant or Focus models, but if anyone uses something else I'd gladly consider it as well.

Thank you all in advance,

Sarah

 

moderated Re: convert webpage containing several tables into 1 excel spreadsheet?

Richard Turner
 

It sounds like you need to learn how to edit in Excel so you can insert a blank row, and then label the columns you need, etc.

BTW, you cannot send attachments to the list.

 

 

 

Richard

 

🖖 Live long and prosper

 

 

Check out my web site at: www.turner42.com

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Monday, January 27, 2020 4:33 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

Hi again Alan,

 

It worked, but there are a few oddities.

 

If I want it to work in my flashcard app, the top line needs to say “side 1 in A1, and “side 2” in b1.

The remainder of the items also need to take this format.

 

Is there an easy way to do this?

 

I’ll attach the file so you can see how it looks now.

 

Thanks,

 

Jessica

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Alan Lemly
Sent: Monday, January 27, 2020 5:34 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

You might try saving the web page as a single html file and opening that file in Excel and see what you get.

 

Alan Lemly

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Monday, January 27, 2020 2:14 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

That is a bit more involved than what could be handled easily via Email.

What is the web page?

I'll see if I can help with this.

 

 

 

Richard

"Reality is the leading cause of stress for those who are in touch with it." 

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

 

 

On Jan 27, 2020, at 10:46 AM, Jessica D <jldail13@...> wrote:



Hi,

I know this isn’t directly related to jaws, but I’m using jaws 2020.

 

I’d like an efficient way to learn the commands for the Focus line of braille displays, since those items are covered on the certification exam.

 

I found a page that contains several tables of these commands, and would like to get all this data into a spreadsheet.

 

Does anyone know how to do this?

 

Thanks,

 

Jessica

 

moderated Seeking feedback on 40 and 80 cell displays

Rayn Darren
 

Greetings fellow Jaws users!

I'm a programmer and I'm in need of a new braille display. I currently have a Polaris and am unable to pair it to my computer due to technical issues with the unit. Therefore I'm in need of a new display, only a display this time as I don't make use of the other functions that come with a note-taking unit. To that end, I come to you fine people in hopes that someone will have some insight on displays.

I'm looking for feedback on 40 or 80 cell displays. I think perhaps the 80 cells will be too long for me, but since I need to read everything and every dot counts, 80 just might be what I need to be effective.  I've pretty much narrowed it to the BI/Brailliant or Focus models, but if anyone uses something else I'd gladly consider it as well.

Thank you all in advance,

Sarah

 

moderated Re: Jaws 2020 lag with Outlook 365

Rick Mladek
 

Hi, The preview option is not the issue. I have OUtlook 2019 with Jaws 2020 with all updates current and Windows 10. Definitely lags

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jason White via Groups.Io
Sent: Monday, January 27, 2020 7:42 PM
To: main@jfw.groups.io
Subject: Re: Jaws 2020 lag with Outlook 365

 

Have you tried turning off the preview pane in Outlook?

 

From: <main@jfw.groups.io> on behalf of "Norma A. Boge" <naboge@...>
Reply-To: <main@jfw.groups.io>
Date: Monday, January 27, 2020 at 16:52
To: <main@jfw.groups.io>
Subject: Jaws 2020 lag with Outlook 365

 

Hi group,

 

As I await a response from Vispero support, I’m wondering if anyone is experiencing the following:

 

I have noticed that the lag while using Outlook 365 with Jaws 2020 is even worse than with Jaws 2019. Arrowing through a message list, Jaws simply stops speaking. I can read the title of the window but that’s it. Then after 3-4 seconds I am able to proceed normally through the list. And it takes about 5 seconds before I can type a reply to a message.

A few months ago I asked about this lag while in a Outlook webinar with the Microsoft accessibility group. They acknowledged the problem but that was about all they said. I can hardly wait to see what Vispero’s take is.

 

Helpful feedback welcome.

Norma

moderated Re: Jaws 2020 lag with Outlook 365

Jason White
 

Have you tried turning off the preview pane in Outlook?

 

From: <main@jfw.groups.io> on behalf of "Norma A. Boge" <naboge@...>
Reply-To: <main@jfw.groups.io>
Date: Monday, January 27, 2020 at 16:52
To: <main@jfw.groups.io>
Subject: Jaws 2020 lag with Outlook 365

 

Hi group,

 

As I await a response from Vispero support, I’m wondering if anyone is experiencing the following:

 

I have noticed that the lag while using Outlook 365 with Jaws 2020 is even worse than with Jaws 2019. Arrowing through a message list, Jaws simply stops speaking. I can read the title of the window but that’s it. Then after 3-4 seconds I am able to proceed normally through the list. And it takes about 5 seconds before I can type a reply to a message.

A few months ago I asked about this lag while in a Outlook webinar with the Microsoft accessibility group. They acknowledged the problem but that was about all they said. I can hardly wait to see what Vispero’s take is.

 

Helpful feedback welcome.

Norma

moderated Re: convert webpage containing several tables into 1 excel spreadsheet?

Jessica D
 

Hi again Alan,

 

It worked, but there are a few oddities.

 

If I want it to work in my flashcard app, the top line needs to say “side 1 in A1, and “side 2” in b1.

The remainder of the items also need to take this format.

 

Is there an easy way to do this?

 

I’ll attach the file so you can see how it looks now.

 

Thanks,

 

Jessica

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Alan Lemly
Sent: Monday, January 27, 2020 5:34 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

You might try saving the web page as a single html file and opening that file in Excel and see what you get.

 

Alan Lemly

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Monday, January 27, 2020 2:14 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

That is a bit more involved than what could be handled easily via Email.

What is the web page?

I'll see if I can help with this.

 

 

 

Richard

"Reality is the leading cause of stress for those who are in touch with it." 

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

 

 

On Jan 27, 2020, at 10:46 AM, Jessica D <jldail13@...> wrote:



Hi,

I know this isn’t directly related to jaws, but I’m using jaws 2020.

 

I’d like an efficient way to learn the commands for the Focus line of braille displays, since those items are covered on the certification exam.

 

I found a page that contains several tables of these commands, and would like to get all this data into a spreadsheet.

 

Does anyone know how to do this?

 

Thanks,

 

Jessica

 

moderated Re: JAWS won't start after sign-in

Gmail Jonas
 

Did you try to add Jaws to your startup folder?

If not you may try to create a CMD to start Jaws and add that CMD to your startup!

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Dan Longmore
Sent: Monday, January 27, 2020 6:47 AM
To: main@jfw.groups.io
Subject: Re: JAWS won't start after sign-in

 

I’m glad you don’t have a problem on your system, but do realize that every system is a little different and on some systems this is an issue which Freedom Scientific is aware of.

moderated Re: keystroke to get to Office Quick Access Toolbar?

Ann Byrne
 

In theory, pressing alt+1 should take you to the first item in the QAT, alt+2 to the second, etc. My experience is that that only works sometimes.

At 05:10 PM 1/27/2020, you wrote:
A JAWS webinar I listened to a while back talked about adding icons to the Quick Access Toolbar in Excel. I did this for the sort button, which I regularly use, Now I wonder if there is a quick way to get to that QAT toolbar other than tabbing through all the ribbons. I figure there must be if it was worth pointing out on a JAWS webinar, but I did not write any notes on how to do it.

Robin
Using Windows 10, Office 2016 and JAWS 2019

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

moderated Re: convert webpage containing several tables into 1 excel spreadsheet?

Jessica D
 

Hi Alan, 
I had no idea excel could open html files. 
I thought that was just a web browser format? 

Thanks,
Jessica



On Jan 27, 2020, at 5:33 PM, Alan Lemly <walemly@...> wrote:



You might try saving the web page as a single html file and opening that file in Excel and see what you get.

 

Alan Lemly

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Monday, January 27, 2020 2:14 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

That is a bit more involved than what could be handled easily via Email.

What is the web page?

I'll see if I can help with this.

 

 

 

Richard

"Reality is the leading cause of stress for those who are in touch with it." 

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

 



On Jan 27, 2020, at 10:46 AM, Jessica D <jldail13@...> wrote:



Hi,

I know this isn’t directly related to jaws, but I’m using jaws 2020.

 

I’d like an efficient way to learn the commands for the Focus line of braille displays, since those items are covered on the certification exam.

 

I found a page that contains several tables of these commands, and would like to get all this data into a spreadsheet.

 

Does anyone know how to do this?

 

Thanks,

 

Jessica

 

moderated Re: keystroke to get to Office Quick Access Toolbar?

Dean Martineau
 

Press alt, then up arrow, then fight arrow across your buttons.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via Groups.Io
Sent: Monday, January 27, 2020 6:10 PM
To: JFW List (jfw@groups.io) <jfw@groups.io>
Subject: keystroke to get to Office Quick Access Toolbar?

 

A JAWS webinar I listened to a while back talked about adding icons to the Quick Access Toolbar in Excel.  I did this for the sort button, which I regularly use, Now I wonder if there is a quick way to get to that QAT toolbar other than tabbing through all the ribbons.  I figure there must be if it was worth pointing out on a JAWS webinar, but I did not write any notes on how to do it.

 

Robin

Using Windows 10, Office 2016 and JAWS 2019

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

moderated Re: keystroke to get to Office Quick Access Toolbar?

CathyAnne Murtha
 

Press ALT to enter Command Mode. Press UP ARROW once to focus in the QAT.

Press RIGHT and LEFT ARROW to navigate the QAT commands.

Each is associated with a number. Use these numbers with ALT to execute the command.

The first QAT command is ALT-NUMBER ROW 1, the second is ALT-NUMBER ROW 2, etc.

CathyAnne

---
CathyAnne Murtha
Access Technology Institute
www.blind.training
cathy@...
(520) 955-6611

CathyAnne Murtha
CEO
Access Technology Institute, LLC
www.blind.training
cathy@...
Phone: (520) 955-6611



On Mon, Jan 27, 2020 at 4:10 PM -0700, "Van Lant, Robin via Groups.Io" <Robin_Van_Lant@...> wrote:

A JAWS webinar I listened to a while back talked about adding icons to the Quick Access Toolbar in Excel.  I did this for the sort button, which I regularly use, Now I wonder if there is a quick way to get to that QAT toolbar other than tabbing through all the ribbons.  I figure there must be if it was worth pointing out on a JAWS webinar, but I did not write any notes on how to do it.

 

Robin

Using Windows 10, Office 2016 and JAWS 2019

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

moderated keystroke to get to Office Quick Access Toolbar?

Van Lant, Robin
 

A JAWS webinar I listened to a while back talked about adding icons to the Quick Access Toolbar in Excel.  I did this for the sort button, which I regularly use, Now I wonder if there is a quick way to get to that QAT toolbar other than tabbing through all the ribbons.  I figure there must be if it was worth pointing out on a JAWS webinar, but I did not write any notes on how to do it.

 

Robin

Using Windows 10, Office 2016 and JAWS 2019

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

moderated Re: convert webpage containing several tables into 1 excel spreadsheet?

 

You might try saving the web page as a single html file and opening that file in Excel and see what you get.

 

Alan Lemly

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: Monday, January 27, 2020 2:14 PM
To: main@jfw.groups.io
Subject: Re: convert webpage containing several tables into 1 excel spreadsheet?

 

That is a bit more involved than what could be handled easily via Email.

What is the web page?

I'll see if I can help with this.

 

 

 

Richard

"Reality is the leading cause of stress for those who are in touch with it." 

-- from The Search for Signs of Intelligent Life in the Universe, by Jane Wagner

 



On Jan 27, 2020, at 10:46 AM, Jessica D <jldail13@...> wrote:



Hi,

I know this isn’t directly related to jaws, but I’m using jaws 2020.

 

I’d like an efficient way to learn the commands for the Focus line of braille displays, since those items are covered on the certification exam.

 

I found a page that contains several tables of these commands, and would like to get all this data into a spreadsheet.

 

Does anyone know how to do this?

 

Thanks,

 

Jessica

 

moderated Jaws 2020 lag with Outlook 365

Norma A. Boge
 

Hi group,

 

As I await a response from Vispero support, I’m wondering if anyone is experiencing the following:

 

I have noticed that the lag while using Outlook 365 with Jaws 2020 is even worse than with Jaws 2019. Arrowing through a message list, Jaws simply stops speaking. I can read the title of the window but that’s it. Then after 3-4 seconds I am able to proceed normally through the list. And it takes about 5 seconds before I can type a reply to a message.

A few months ago I asked about this lag while in a Outlook webinar with the Microsoft accessibility group. They acknowledged the problem but that was about all they said. I can hardly wait to see what Vispero’s take is.

 

Helpful feedback welcome.

Norma