Date   

moderated Google Disability Support Contact Info, and Still Looking For Help With Importing IE Favorites Into Google Chrome

Tom Behler
 

Hello, everyone.

 

Does anyone have a phone number for Google Disability Support?

 

I have the following e-mail address, and also wonder if it is still valid:

 

disability-support-external@...

 

I’m still struggling with importing my IE favorites into Google Chrome, and would like to contact them about this issue if possible.

 

I’m also still very much interested in any suggestions from list members.

 

Here, once again, is a summary of my issue:

 

Does anyone have an easy way to import IE Favorites into the Google Chrome Bookmarks list?

 

I have done this before, using the below instructions, but now can’t seem to get the process to work.

 

My sighted spouse even tried, using the mouse, and couldn’t get the favorites list to import either.

 

Here are those instructions:

 

To import your IE book marks, Press alt F and you will be in the vertical Chrome menu. Arrow down to book marks and press the right arrow. Now, arrow down to where it says import book marks and settings... Press enter on that, and you will be able to import your favorites and settings from IE.

 

Thanks for any helpful info or suggestions.

 

Tom Behler

 

 

 

 

 

 


moderated Re: how do I get rid of bloc quote?

Jim Rawls
 

Done and it worked. Jim

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Bill White
Sent: Tuesday, December 29, 2020 8:36 PM
To: main@jfw.groups.io
Subject: Re: how do I get rid of bloc quote?

 

Hi, Jim. I told you to open the wrong Verbocity level settings. The one Mike told you is correct, and you will find the block quotations there, exactly where I thought they are, at the very top, first item.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jim Rawls
Sent: Tuesday, December 29, 2020 7:20 PM
To: main@jfw.groups.io
Subject: how do I get rid of bloc quote?

 

Mike, you told me once, and I can’t find that email. Frown. Please send again. Thanks Jim


moderated Re: Keeping the subject line up to date. "version questions"

Marie <magpie.mn@...>
 

brian, while I understand your statement, it is only courtesy to change the subject when necessary. It is more than irritating to find that you have deleted a thread which later contains information you would like to see but have missed because someone is too lazy to use a proper subject.
 

From: Brian Vogel
Sent: Tuesday, December 29, 2020 4:51 PM
To: main@jfw.groups.io
Subject: Re: Keeping the subject line up to date. "version questions"
 
Tim,

         While I agree with you, entirely, that it's best practice to split a topic off, with a new title, when the actual topic of conversation changes, there are times where thread drift occurs like it did here.  If you realize that you are no longer interested in a given topic with a specific title, remember that you can use the Mute this topic link at the end of any message you've already received for that topic and you will receive no more.

          If you find the actual volume of email from any given Groups.io group to be overwhelming, you can also set up topic preview, where you would only receive the first message in any new topic, and receive no more unless you activate the Follow this topic link in the first one.  See: Controlling the Messages You Receive via E-Mail from Groups.io (docx file)
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

One does not discover new lands without consenting to lose sight of the shore for a very long time.

           ~ André Gide


moderated Re: version questions

David Kingsbury
 

Hello,

 

A few things. First, If you have JAWS set to run from the System tray, Insert J will work to bring up the JAWS menu, but Caps Lock J will not. Caps Lock is not perfectly substitutable as a modifier key 100 percent of the time, and this is one example where it is not. Second, however you get into the JAWS menus, once you are in, just hit A for About and the JAWS version will be revealed. And third, Control Insert V works poorly for telling you the version of Office you are in. It says pretty meaningless stuff about 16 something or other, regardless of what version you are using. Better is to hit Alt F D A and your Office version will be spoken clearly. When I did this, it clearly said Office 365. If you have 2016 or 2019, it would clearly say that too.

 

David


moderated Re: Keeping the subject line up to date. "version questions"

Scott Pearl
 

Brian,

Wow, this is good advice on managing these prolific emails. I must say that I have immensely appreciated your overall knowledge and contributions on this list and other lists as I usually pay close attention to finding your posts as they are extremely helpful. You’re doing a lot of good.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Brian Vogel
Sent: Tuesday, December 29, 2020 5:51 PM
To: main@jfw.groups.io
Subject: Re: Keeping the subject line up to date. "version questions"

 

Tim,

         While I agree with you, entirely, that it's best practice to split a topic off, with a new title, when the actual topic of conversation changes, there are times where thread drift occurs like it did here.  If you realize that you are no longer interested in a given topic with a specific title, remember that you can use the Mute this topic link at the end of any message you've already received for that topic and you will receive no more.

          If you find the actual volume of email from any given Groups.io group to be overwhelming, you can also set up topic preview, where you would only receive the first message in any new topic, and receive no more unless you activate the Follow this topic link in the first one.  See: Controlling the Messages You Receive via E-Mail from Groups.io (docx file)
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

One does not discover new lands without consenting to lose sight of the shore for a very long time.

           ~ André Gide


moderated Rearranging headers in Thunderbird? Here's how!

Leo
 

How to rearrange  the column headers in Thunderbird?

Working on Thunderbird Version 78.6.0.

 

In order to successfully accomplish this, we have to bare in mind four Jaws commands. I use Jaws commands for Desktop layout, so if you are using a laptop, you can bring up the dialogue  called search for Jaws commands, and type a concise description for each one of them.

 

We require the following commands:

 

Activate touch cursor

Root Jaws cursor to touch cursor

Root touch cursor to Jaws cursor

Lock left button of the mouse

 

This is so much simpler  than it looks. What we are going to do is no rocket science, and it can be described as positioning the touch cursor right on the clickable element that we want to drag and drop, then  we root the Jaws cursor right to this point, and we  use the command to simulate holding down the left button of the mouse. Followingly, we move around using the touch cursor to place  the cursor in the insertion point in which  we want to drop our element, and lastly,  we stop holding down the left button of the mouse.

If you use a desktop as I do, make sure to turn off NumLock during all the drag and drop process.

Step by step instructions:

 

1.     Go to the first message in the list, and activate the touch cursor, Shift plus  NumPadPlus.

2.     Press left Arrow and the first item you will hear will be  “select columns to display,” keep pressing left arrow and you will find the column headers, date, junk status, read, etc. In case, the first item you hear  after pressing left arrow is “list,” press down arrow once, and press right arrow to move around the column headers.

3.     Go to the column header that you wan to drag,  and root the jaws cursor to the touch cursor, Jaws key plus shift plus NumPad minus.

4.     Now hold down the left button of the mouse by pressing jaws key plus  NumPad slash . At this point,  you are simulating holding down the left button of the mouse right on the element you want to drag around.

5.     In order to move around the headers and place the cursor in the point in which you want to drop your element, root the touch cursor to Jaws cursor by pressing  Jaws key plus shift plus NumPadPlus. Now you can Move rightward or leftward using the arrow keys again.

6.     When you find the place in which you want to drop your element, root the Jaws cursor to touch cursor by pressing Jaws key plus shift plus NumPadMinus.

7.     Finally, press Jaws key plus NumPadSlash to drop your element.

 

As a sidenote, you can monitor which cursor is currently active all the way down the line by using the command Alt plus Delete.

 

Ok, it may sound to such a tangled maze of rooting one cursor to another back and forth,  but here you got a couple of general notions about the process!

 

Basically, you use  touch cursor to move around the items, Jaws cursor to place the focus of the cursor both in the initial position and in the final position, and locking or holding the left button of the mouse both to indicate the action to drag and to indicate the action to drop the element.

 

I know this is not technically accurate from a visual perspective, but I’m neither a sighted nor partially sighted guy, and I believe is more relevant to describe actions from a functional perspective for the final user.

 

 

--
Leo

“Pain is inevitable. Suffering is optional.”
― haruki murakami,


moderated Re: version questions

Dave Durber
 

Madison:

When you are at the desktop, you can use the JAWS icon, for the version you are using to open the JAWS Context Window for that version of JAWS .

If you are anywhere else in Windows, such as in a menu or in a Windows applet or, you are in a program, such as File Explorer or Outlook, etc., and you are using the JAWS Desktop Keyboard layout, use the JAWS/INSERT+J keystroke, to open the JAWS Context Window, for the version of JAWS you are using.

Likewise,If you are anywhere else in Windows, such as in a menu or in a Windows applet or, you are in a program, such as File Explorer or Outlook, etc., and you are using the JAWS Laptop Keyboard Layout, use the CTRL+SHIFT+J keystroke, to open the JAWS Context Window for the version of JAWS you are using.

HTH

Dave

----- Original Message -----
From: "Madison Martin" <maddymartin@mymts.net>
To: <main@jfw.groups.io>
Sent: Tuesday, December 29, 2020 11:10 PM
Subject: Re: version questions


I just tried and it didn't say anything about the Jaws menu.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Nermin via groups.io
Sent: December 29, 2020 3:03 PM
To: main@jfw.groups.io
Subject: Re: version questions

Hi,


I just press Insert+j.

Another thing you can try is this: while on the desktop, press j until you get to your desired JAWS version, then press enter, pretending you want to start JAWS again. Instead of starting JAWS, either the context menu or the main window will come up.


If the context menu comes up, press cursor up twice to get to the "About..." option within the menu, then press enter.

Generally, you can use insert+1 to get into keyboard help mode in JAWS, and Insert+1 again to leave it.

With that in mind, Madison, what happens if you press Insert+1, then press insert+j while in keyboard help mode?

Use speech history to copy what it says by pressing JAWSKey+Space, followed by h. That will open up a speech history window you can navigate through and copy from using control+a, then Control+c to copy its contents.

Also, it would be very helpful if we knew the exact brand and name of the laptop in question.

Maybe you have some weird keyboard functions activated or some sort of multi media key conficuration.


Regards,

Nermin


moderated Re: Question about a popup window whenever I open outlook2016

Pastor Gil Pries
 

Hi Al,

Try this: when your in your inbox, press b then right arrow and press enter.

 

Pastor Gil

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Albert Cutolo
Sent: Tuesday, December 29, 2020 1:33 PM
To: main@jfw.groups.io
Subject: Question about a popup window whenever I open outlook2016

 

Good afternoon again, 

 

Whenever I open my outlook2016, I get a popup window message asking me to download the  outlook app. My question is, how can I get rid of this stupid popup message?

 

Al,  who just recently joined this list.     


moderated Re: a big thannkyou for help received to my using jaws how do you set up for the first time WIFI on a new computer? email

Hank William Merchant
 

A Happy Holidays and a Happy New Year everyone,

I just want to say a big, big thanks very much for all the very, very helpful replies to my using jaws how do you set up for the first time WIFI on a new computer? email. All of your wonderful help is muchly, muchly appreciated!







Seasons greetings!,
Kindest regards,
Hank

-----Original Message-----
From: Randy Barnett
Sent: Tuesday, December 29, 2020 1:57 AM
To: main@jfw.groups.io
Subject: Re: using jaws how do you set up for the first time WIFI on a new computer?

press insert plus f11 then arrow to the icon that will say connections
available and press enter. now find your wifi network and then enter the
password when prompted.

On 12/28/2020 9:01 PM, Curtis Delzer wrote:
just connect a rj45 cord from the router to her computer, and it should find the interface.

Curtis Delzer
HS
K 6 V F O
Rialto, CA

curtis@calweb.com

On 12/28/2020 11:05 AM, Hank William Merchant wrote:
\
Hello,

Happy Holidays everyone and hope you all have a super, great and safe and prosperous New Year in 2021! In Win10 using jfw 2020, can someone maybe plese tell me how easy it is with jaws to setup your wifi for the first time so I can setup successfully the WIFI on my wife's computer so then my wifes computer will connect successfully to the internet through our already setup router? Any help I can maybe get with this would be so very much appreciated! Much, much thanks in advance for any possible help with this!







Seasons greetings!,
Kindest regards,
Hank









moderated Re: version questions

Marten Post Uiterweer
 

Madison,

Ctrl-shift-capslock+j I ment.

Marten

On Wed, 30 Dec 2020 13:17:25 +0100 "Marten Post Uiterweer" <martenpu@xs4all.nl> wrote:

Madison,

If the question is how to go to the jaws menu if laptop layout is active,
press ctrl-shift-capslock.

Regards, Marten
On Tue, 29 Dec 2020 19:47:54 -0600 "Madison Martin" <maddymartin@mymts.net> wrote:

Found the info (I hope this is the right info as there was a lot):
Lenovo think book 13s 20r9005vus


From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 6:53 PM
To: main@jfw.groups.io
Subject: Re: version questions

It’s a Lenovo, but I honestly don’t remember what the model number and make is.

From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of Brian Vogel
Sent: December 29, 2020 5:34 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: version questions

On Tue, Dec 29, 2020 at 06:10 PM, Madison Martin wrote:
This laptop
-
Which, for the sake of complete clarity, is what make and model number? There is definitely some variation in laptop keyboards, and particularly when it comes to models that do not include any number pad.

--
Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042
One does not discover new lands without consenting to lose sight of the shore for a very long time.
~ André Gide









moderated Re: version questions

Marten Post Uiterweer
 

Madison,

If the question is how to go to the jaws menu if laptop layout is active,
press ctrl-shift-capslock.

Regards, Marten

On Tue, 29 Dec 2020 19:47:54 -0600 "Madison Martin" <maddymartin@mymts.net> wrote:

Found the info (I hope this is the right info as there was a lot):
Lenovo think book 13s 20r9005vus


From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: December 29, 2020 6:53 PM
To: main@jfw.groups.io
Subject: Re: version questions

It’s a Lenovo, but I honestly don’t remember what the model number and make is.

From: main@jfw.groups.io <mailto:main@jfw.groups.io> <main@jfw.groups.io <mailto:main@jfw.groups.io> > On Behalf Of Brian Vogel
Sent: December 29, 2020 5:34 PM
To: main@jfw.groups.io <mailto:main@jfw.groups.io>
Subject: Re: version questions

On Tue, Dec 29, 2020 at 06:10 PM, Madison Martin wrote:
This laptop
-
Which, for the sake of complete clarity, is what make and model number? There is definitely some variation in laptop keyboards, and particularly when it comes to models that do not include any number pad.

--
Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042
One does not discover new lands without consenting to lose sight of the shore for a very long time.
~ André Gide






moderated Re: version questions

Arkadiusz Świętnicki <nuno69a@...>
 

Open any JAWS settings and press INS+CTRL+V. If you have JAWS set to
start from system tray then you need to uncheck this in the basic
settings.


moderated Re: how do I get rid of bloc quote?

Bill White <billwhite92701@...>
 

Hi, Jim. I told you to open the wrong Verbocity level settings. The one Mike told you is correct, and you will find the block quotations there, exactly where I thought they are, at the very top, first item.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jim Rawls
Sent: Tuesday, December 29, 2020 7:20 PM
To: main@jfw.groups.io
Subject: how do I get rid of bloc quote?

 

Mike, you told me once, and I can’t find that email. Frown. Please send again. Thanks Jim


moderated Re: how do I get rid of bloc quote?

Mike B
 

Hi Jim,
 
This setting changed as of Jaws2018.  Here are the newer steps.
1. Open the Settings Center, Insert / Jaws Key + 6, on the number row and press, Control, Shift + D, to open default all applications.
 
2. Arrow down to, Web / HTML / PDF's, and right arrow to open.
 
3. Arrow down to, Reading, and right arrow to open.
 
4. Down arrow to,Configure web verboscity levels closed, and right arrow to open.  Down arrow to, Medium..., and press the spacebar to open.  Do not press enter, press the spacebar here.
Note: the default level is medium for this.
 
5. Arrow down to, Block quoatation, and uncheck this checkbox.  Now tab to, Okay, press the spacebar, tab to, Apply, press the spacebar, tab to, Okay, and press enter to save and close.
 
 
Stay safe and take care.  Mike.

----- Original Message -----
From: Jim Rawls
Sent: Tuesday, December 29, 2020 7:20 PM
Subject: how do I get rid of bloc quote?

Mike, you told me once, and I can’t find that email. Frown. Please send again. Thanks Jim


moderated Re: how do I get rid of bloc quote?

Bill White <billwhite92701@...>
 

Hi, Jim. Open the application or program in which you are hearing block quotes. Then open JAWS settings center. Then open Verbocity levels. Open configuration for the verbocity level for which JAWS is set in the application you want to change. Uncheck Block Quotations. TAB to OK, and press ENTER. That should do it.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jim Rawls
Sent: Tuesday, December 29, 2020 7:20 PM
To: main@jfw.groups.io
Subject: how do I get rid of bloc quote?

 

Mike, you told me once, and I can’t find that email. Frown. Please send again. Thanks Jim


moderated Re: Keeping the subject line up to date. "version questions"

Shan Noyes
 

hi i agree It would be greatly appreciated that when the subject changes inside a discussion that the subject is also changed.  because like today i read a few of the  messages and decided that i did not want to read anymore on the specific topic so i just deleted them.  the problem comes up when the subject stays the same but the discussion moves on.  so one has to read everything on a subject to ensure that  they are not  missing any pearls of wisdom.

so please start a new topic if your info has nothing to do with the old discussion  subject. 

have a good day.

shan noyes
 


On Dec 29, 2020, at 6:51 PM, Brian Vogel <britechguy@...> wrote:

Tim,

         While I agree with you, entirely, that it's best practice to split a topic off, with a new title, when the actual topic of conversation changes, there are times where thread drift occurs like it did here.  If you realize that you are no longer interested in a given topic with a specific title, remember that you can use the Mute this topic link at the end of any message you've already received for that topic and you will receive no more.

          If you find the actual volume of email from any given Groups.io group to be overwhelming, you can also set up topic preview, where you would only receive the first message in any new topic, and receive no more unless you activate the Follow this topic link in the first one.  See: Controlling the Messages You Receive via E-Mail from Groups.io (docx file)
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

One does not discover new lands without consenting to lose sight of the shore for a very long time.

           ~ André Gide


moderated how do I get rid of bloc quote?

Jim Rawls
 

Mike, you told me once, and I can’t find that email. Frown. Please send again. Thanks Jim


moderated Re: Question on renaming a file

Bill White <billwhite92701@...>
 

Hi, Albert. Your first instinct is correct. Do an F2 on the file and not open it.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Albert Cutolo
Sent: Tuesday, December 29, 2020 1:26 PM
To: main@jfw.groups.io
Subject: Question on renaming a file

 

Good afternoon everyone, 

 

How would I go about renaming a file or folder that I  made? Should I do an F2 on the file and not open it, or should I open the file, and then do an F2 too make the change.

 

Thank’s in advance, for any and all help.         


moderated Re: Scripts in default user disappeared and Jaws scripting mailing list

Cohn, Jonathan
 

Hello,
I turned on my development computer today, to try and answer your question, but the computer refused to boot.
Feel free to join the jaws-scripting list at freelists.org and say something about wanting to better understand this function.

My apologies for not getting anything back to you.

On Dec 24, 2020, at 15:56, Leo <literophilus@...> wrote:

Hi again Jonathan,

I've been reading the FS documentation to download for free from the website, including the FSDN, and I want to study the code samples contained in the Jaws share scripts,  but I haven't found how to access the code. For instance, I want to have a look at the VKSelect scripts, but whenever I try to open it, a message pops up saying that this script is present in the .JSD documentation but not in the default.JSS file, so I can't really look into the code.

Is there another way in which I can access the codes?

Leo

“Pain is inevitable. Suffering is optional.”
― haruki murakami,
On 12/24/2020 12:27 PM, Cohn, Jonathan via groups.io wrote:
OK, perhaps I was being a little harsh about the jaws-scripting list. 
I do remember that one time when I told somebody that the JAWS-HELP functions have the ability to let you know what script is attached to a specific function, that somebody complained about this being very basic information. But here is a snippet that might help the original question:
,

If you need code samples, than you have to study JAWS 
shared scripts.
They are inexhaustible collections of examples!
By the way, you can contact Vispero and could buy some 
overpriced script writing training materials. But they 
contain "common script writing guidelines" only.

On the other hand, the new FSDN much better than the 
previous ones! You have to download it and look!

Back on the reference of a mailing list for doctors, let's say specifically urologist. If you wrote an inquiry asking why does it hurt when I urinate? I doubt anybody would appreciate answering. However if you ask a question giving several symtoms, and results of basic tests then there would be interest in answering the question. 
Just like if everybody on the JFW list kept asking how do I get latest version of JAWs, there might be some grumpy people on list. In fact, the NVDA list admins, are fairly particular now, that people stay in a strict bandwidth.
Jonathan

On Dec 23, 2020, at 5:42 PM, Leo <literophilus@...> wrote:

Mario, I'm wondering the same here...!


Leo

“Pain is inevitable. Suffering is optional.”
― haruki murakami,

On 12/23/2020 2:25 PM, Mario wrote:
the scripting list on freelists doesn't sound like it's a good list if
one is just starting out in writing scripts. I wonder if there's a
more suitable list for newbee scripters with plenty of basic questions?

-------- Original Message --------
From: Cohn, Jonathan via groups.io
[mailto:jonathan.c.cohn@...]
To: main@jfw.groups.io
Date: Wednesday, December 23, 2020, 12:33 PM
Subject: Scripts in default user disappeared and Jaws scripting
mailing list
Hello,
It is possible that FS put script definitions in default.jsd that are
not in default.jss. Default.jss does include several "use" statements
that include code from other libraries. Also, the psd d files are used
for the command to insert a function in code, and for the  verification
that parameters are correctly listed for functions.
There is a JAWS scripting list on freelists. This list has most of the
professional scripters on it, so they get impatient if people ask fairly
simple questions. Also, if you ask can I get a script for Application X,
nobody will answer.
Please try to search the archive of over 10 years of scripting history
before asking a question.
Best of luck!
Jonathan Cohn














moderated Re: version questions

Bill White <billwhite92701@...>
 

Hi, Bob. CAPSLOCK plus J won't work to bring up the JAWS menu when the laptop is in JAWS laptop mode. CAPSLOCK plus J equals Say Prior Word.

 

Bill White

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Bob Kennedy
Sent: Tuesday, December 29, 2020 3:17 PM
To: main@jfw.groups.io
Subject: Re: version questions

 


Sorry if any of this has already been mentioned, I'm chiming in a lot late. Hopefully you chose laptop keyboard when Jaws was installed. If so, you should be able to use the caps lock in place of the insert key. Just choose caps lock and J together. I've never seen a laptop without at least the 4 arrow keys. Arrow up to about and enter.

One other idea that I use is a bluetooth keyboard. The receiver plugs into a USB port and I have a full keyboard. Of course I have very large hands so typing on a laptop doesn't work well for me.

On Tuesday, December 29, 2020, 06:10:12 PM EST, Madison Martin <maddymartin@...> wrote:

 

 

I don’t have a second insert key. This laptop doesn’t have a numbpad, it doesn’t even have home, end, or page up/down keys.  

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: December 29, 2020 2:58 PM
To: main@jfw.groups.io
Subject: Re: version questions

 

Do you have the 6 pack of keys somewhere on your keyboard with a second Insert key?  If so what happens if you press this Insert key + J?  If nothing happens, there's a setting in the Settings Center default all applications that needs to be turned on to use the second Insert key as a Jaws key.  It's under the Keyboard heading / Jaws Insert key.


Stay safe and take care.  Mike.

----- Original Message -----

Sent: Tuesday, December 29, 2020 12:47 PM

Subject: Re: version questions

 

I have my keyboard layout set to laptop, as that's the only way I have an insert key.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Nermin via groups.io
Sent: December 29, 2020 1:59 PM
To: main@jfw.groups.io
Subject: Re: version questions

Hi,


Capslock+ j is not mapped to the JAWS window in the laptop keyboard layout.

It is used for jumping to the prior word on the home row.

Madison, are you using the jAWs laptop or desktop layout?


Regards,

Nermin









5001 - 5020 of 90091