Date   

moderated Re: excel - defining names

mike mcglashon
 

Mr. David:

 

Question for you regarding your “title” instructions:

Block quote:

3.      Type title in the edit box and press enter.

Now you will hear column titles (the months) as you left and right arrow through the table, and row titles (the types of bills) as you up and down arrow.

End block quote:

What do I do differently in order to get only the row or the column titles to read,

Instead of both?

;

 

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Kingsbury
Sent: Friday, June 12, 2020 1:00 PM
To: main@jfw.groups.io
Subject: Re: excel - defining names

 

Hi,

 

This is much simpler to do using the Define Names command in Excel, rather than JAWS.

1.      Go to the cell that is the intersection of the column and row titles you want read to you when navigating inside the table. For example, if you list bill items you want to pay down column A, and months you will be paying across row 2, start in cell A2.

2.      Pres the applications key, up arrow ttwice to Define Names and press Enter.

3.      Type title in the edit box and press enter.

 

Now you will hear column titles (the months) as you left and right arrow through the table, and row titles (the types of bills) as you up and down arrow.

 

David


moderated Rearranging columns in Mozilla Thunderbird

Sameer
 

Dear List Members,


Kindly guide me regarding how to rearrange columns in Mozilla Thunderbird so that the sender's name appears first in the list of columns displayed in Inbox.


I am using JAWS 2020 on a Windows 10 machine with Thunderbird version 68.9.0


Thanking all in advance for any & all assistance.


--
Regards
Mr. Sameer Latey


moderated Re: Notifications

 

On Fri, Jun 12, 2020 at 01:39 PM, David Griffith wrote:
Mine is set for 5 minutes
David, if you used the Control Panel method to set this, check that it has carried over to Settings, Ease of Access, Display Pane, Show notifications for dropdown.

Also, it's worth checking there just to see if it might somehow gotten reset.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: Notifications

David Griffith
 

 

Thanks for this. Mine is set for 5 minutes which really should be long enough even for me so I am not quite sure what is going on.  Possibly I am touching other keys which is dismissing the notification prematurely. I will try really carefully  the next time I hear a notification.

David Griffitha

Sent from Mail for Windows 10

 

From: Mike B
Sent: 12 June 2020 18:07
To: main@jfw.groups.io
Subject: Re: Notifications

 

Here are a few notes on how to keep the pop-up notifications on the screen longer:

From: David Bailes
just to add that you can also change the time the notification remains opens in the Settings app, and it's simpler:
1. Press Windows key + U. The settings app opens at the Ease of Access page, with the first category, Display, selected.
2. Tab to the Show notifications for combo box, and select the time that you want.
David.
From: Bill White
Hi, David. It is easier if you don't use Settings to get to the notifications length setting.
1. Open Control Panel.
2. Navigate to Ease of Access, and press ENTER.
3. Navigate to the "Make it easier to focus on Tasks link and press ENTER.
4. TAB about ten times to the "How long should Windows Notification Dialog Boxes Stay Open" dialog.
5. Arrow up and down in the combo box to find your desired length.
6. TAB to the OK button, and press ENTER.
7. Now Windows Notifications will stay open longer.
Bill White
billwhite92701@...
 
From: Bill White
Hi again, David. I found where the Notification Length setting is when using Settings to open Ease of Access.
1. Open Settings.
2. Open Ease of Access.
3. Open Vision.
4. Open Display.
5. TAB nine times to Notifications, and select the length of displaying the notification.
Bill White
billwhite92701@...


Take care.  Mike.  Sent from my iBarstool.
 *My body has absorbed so much soap and disinfectant lately that when I pee it cleans the toilet.

----- Original Message -----

Sent: Friday, June 12, 2020 9:13 AM

Subject: Re: Notifications

 

I don’t know why but this Windows keystroke has never worked for me personally. It may be that there is a time limited opportunity to press the command and by the time I have got my fingers in place the notification has gone.

The only keystroke which sometimes works for me is Windows A which takes me to the Action centre where some notifications will live.

However even this is not consistent as sometimes notification windows like the annoying DropBox messages will not be located even with this method. Thankfully DropBox seem to have finally got the  message I don’t want warnings of any kind from them.

 

David Griffith

 

 

Sent from Mail for Windows 10

 

From: Delaunay Christophe
Sent: 12 June 2020 15:48
To: main@jfw.groups.io
Subject: Re: Notifications

 

Hi Steve,

 

Perhaps you could try this:

 

When you hear the Windows 10 notifications jingle, press the <windows+shift+v> keystroke in order to focus to the notification and then, press <space> or <enter> key to interact with it.

 

Please note that the <windows+shift+v> key combination is not a screen reader-specific keystroke. In other words, it is always available in Windows 10.

 

HTH, have a nice week-end. Chris D

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Sweeney via groups.io
Sent: Friday, June 12, 2020 4:40 PM
To: jfw@groups.io
Subject: Notifications

 

Hi,

Has anyone figured out how to get to the notifications that pop up on the screen from time to time?

Thx -Steve

              

 

 


moderated saving new contact info into contacts list while in an outlook message

Judy Redlich <jredlichspeaks@...>
 

Recently I’ve had to revamp my entire contacts list in outlook.  I need to add to it, delete duplicates, and compare somewhat alike records and consolidate.  Looking for faster ways to accomplish this.

I also need to know the best way to add a new contact to the contacts right from the message.

I am using Jaws 19 and Office 16.

 

Another question: I am contemplating switching to office 365.  Is the contacts folder easier to use in office 365 desk top version?

 

Thanks.

Judy

 

Helping people tell their story and find their highest potential

Encounter show host, KSIV Radio AM/FM St. Louis, MO

Podcast and blog at www.judyredlich.com

Let’s connect! JudyRedlich.com | linkedin.com/in/judy-redlich

 


moderated Re: Notifications

Mike B
 


Here are a few notes on how to keep the pop-up notifications on the screen longer:
From: David Bailes
just to add that you can also change the time the notification remains opens in the Settings app, and it's simpler:
1. Press Windows key + U. The settings app opens at the Ease of Access page, with the first category, Display, selected.
2. Tab to the Show notifications for combo box, and select the time that you want.
David.
From: Bill White
Hi, David. It is easier if you don't use Settings to get to the notifications length setting.
1. Open Control Panel.
2. Navigate to Ease of Access, and press ENTER.
3. Navigate to the "Make it easier to focus on Tasks link and press ENTER.
4. TAB about ten times to the "How long should Windows Notification Dialog Boxes Stay Open" dialog.
5. Arrow up and down in the combo box to find your desired length.
6. TAB to the OK button, and press ENTER.
7. Now Windows Notifications will stay open longer.
Bill White
billwhite92701@...
 
From: Bill White
Hi again, David. I found where the Notification Length setting is when using Settings to open Ease of Access.
1. Open Settings.
2. Open Ease of Access.
3. Open Vision.
4. Open Display.
5. TAB nine times to Notifications, and select the length of displaying the notification.
Bill White
billwhite92701@...

Take care.  Mike.  Sent from my iBarstool.
 *My body has absorbed so much soap and disinfectant lately that when I pee it cleans the toilet.

----- Original Message -----
Sent: Friday, June 12, 2020 9:13 AM
Subject: Re: Notifications

I don’t know why but this Windows keystroke has never worked for me personally. It may be that there is a time limited opportunity to press the command and by the time I have got my fingers in place the notification has gone.

The only keystroke which sometimes works for me is Windows A which takes me to the Action centre where some notifications will live.

However even this is not consistent as sometimes notification windows like the annoying DropBox messages will not be located even with this method. Thankfully DropBox seem to have finally got the  message I don’t want warnings of any kind from them.

 

David Griffith

 

 

Sent from Mail for Windows 10

 

From: Delaunay Christophe
Sent: 12 June 2020 15:48
To: main@jfw.groups.io
Subject: Re: Notifications

 

Hi Steve,

 

Perhaps you could try this:

 

When you hear the Windows 10 notifications jingle, press the <windows+shift+v> keystroke in order to focus to the notification and then, press <space> or <enter> key to interact with it.

 

Please note that the <windows+shift+v> key combination is not a screen reader-specific keystroke. In other words, it is always available in Windows 10.

 

HTH, have a nice week-end. Chris D

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Sweeney via groups.io
Sent: Friday, June 12, 2020 4:40 PM
To: jfw@groups.io
Subject: Notifications

 

Hi,

Has anyone figured out how to get to the notifications that pop up on the screen from time to time?

Thx -Steve

              

 


moderated Re: excel - defining names

David Kingsbury
 

Hi,

 

This is much simpler to do using the Define Names command in Excel, rather than JAWS.

1.      Go to the cell that is the intersection of the column and row titles you want read to you when navigating inside the table. For example, if you list bill items you want to pay down column A, and months you will be paying across row 2, start in cell A2.

2.      Pres the applications key, up arrow ttwice to Define Names and press Enter.

3.      Type title in the edit box and press enter.

 

Now you will hear column titles (the months) as you left and right arrow through the table, and row titles (the types of bills) as you up and down arrow.

 

David


moderated Re: JAWS reading text automatically

Cohn, Jonathan
 

Generally, this can be done with frames or with JAWS scripting. Obviously frames are easier. I am not sure if you can just get it to be read when focus is on the field, but if you create a frame then you will a prompt once the frame dimensions are marked for what you want to do. You can have it speak any time a new text is occurring. I haven't played with frames in Windows 10 which limits some of the functionality that Frames used to use, so I have no idea  how well it works with current systems.
Use jaws help for commands and search for frame to understand what is possible.
jaws-space followed by J allows you to do this.
Jonathan


moderated Re: Notifications

David Griffith
 

I don’t know why but this Windows keystroke has never worked for me personally. It may be that there is a time limited opportunity to press the command and by the time I have got my fingers in place the notification has gone.

The only keystroke which sometimes works for me is Windows A which takes me to the Action centre where some notifications will live.

However even this is not consistent as sometimes notification windows like the annoying DropBox messages will not be located even with this method. Thankfully DropBox seem to have finally got the  message I don’t want warnings of any kind from them.

 

David Griffith

 

 

Sent from Mail for Windows 10

 

From: Delaunay Christophe
Sent: 12 June 2020 15:48
To: main@jfw.groups.io
Subject: Re: Notifications

 

Hi Steve,

 

Perhaps you could try this:

 

When you hear the Windows 10 notifications jingle, press the <windows+shift+v> keystroke in order to focus to the notification and then, press <space> or <enter> key to interact with it.

 

Please note that the <windows+shift+v> key combination is not a screen reader-specific keystroke. In other words, it is always available in Windows 10.

 

HTH, have a nice week-end. Chris D

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Sweeney via groups.io
Sent: Friday, June 12, 2020 4:40 PM
To: jfw@groups.io
Subject: Notifications

 

Hi,

Has anyone figured out how to get to the notifications that pop up on the screen from time to time?

Thx -Steve

              

 


moderated Re: Notifications

Delaunay Christophe
 

Hi Steve,

 

Perhaps you could try this:

 

When you hear the Windows 10 notifications jingle, press the <windows+shift+v> keystroke in order to focus to the notification and then, press <space> or <enter> key to interact with it.

 

Please note that the <windows+shift+v> key combination is not a screen reader-specific keystroke. In other words, it is always available in Windows 10.

 

HTH, have a nice week-end. Chris D

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Steve Sweeney via groups.io
Sent: Friday, June 12, 2020 4:40 PM
To: jfw@groups.io
Subject: Notifications

 

Hi,

Has anyone figured out how to get to the notifications that pop up on the screen from time to time?

Thx -Steve

              


moderated Notifications

Steve Sweeney
 

Hi,

Has anyone figured out how to get to the notifications that pop up on the screen from time to time?

Thx -Steve

              


moderated JAWS reading text automatically

Frank Ventura
 

Hi all, I have a program that has an editable text box where I can type in a numerical value. At times the program will change this number to reflect what is going on. If my focus is on this text box how can I get JAWS to automatically read the text when it changes?

Thanks

Frank Ventura


moderated Re: Scanning with Open book versus JAWS

CJ &AA MAY
 

This is really interesting. We have an all singing all dancing scanner which is a printer, photo-copier, fax, machine and scanner and is so complicated I leave it alone. But I will try it out with your instructions and see what happens!

Alison


moderated Re: Scanning with Open book versus JAWS

Richard Turner
 

If Winston Chen, the developer of Voice Dream Scanner, can get it to recognize columns; which may happen by the end of the year or early next, then Voice Dream Scanner with a stand will likely match any flatbed scanning solutions.
I find its accuracy as good if not better than the computer based software.
You can scan multiple pages into one document.
You can then save it as a fully accessible PDF that keeps the visual appearance of the original.
But, for scanning plain documents without columns, it is fabulous.

For now, though, anything like two pages of a book, or something in columns a computer and a flatbed will be the way to go.



Richard
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dean Martineau
Sent: Thursday, June 11, 2020 6:20 PM
To: main@jfw.groups.io
Subject: Re: Scanning with Open book versus JAWS

I don't think OpenBook is the equal of Kurzweil 1000. Neither product is really being developed, but I'm glad I have K1000, because when I tried OpenBook, results weren't as good. Reading books is far easier with one of these programs, or perhaps a desktop off-the-shelf program, than with a phone.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Loy
Sent: Thursday, June 11, 2020 5:47 PM
To: main@jfw.groups.io
Subject: Re: Scanning with Open book versus JAWS

I use my IPhone with Voice dream Scanner for quick scans of mail or to quickly find out what an item on my desk is. It is remarkably accurate .
But for important items I do use a flat bed scanner.
----- Original Message -----
From: "David Goldfield" <david.goldfield@...>
To: <main@jfw.groups.io>
Sent: Thursday, June 11, 2020 4:58 PM
Subject: Re: Scanning with Open book versus JAWS


Honestly, my opinion is that scanning material with a flatbed scanner
is always going to be a bit easier than using a phone unless you have
a stand that can position your phone in a stationary location. Even
then starting a scanner from a PC keyboard and using that keyboard to
quickly save a document or copy and paste that scanned text into
another document is, at least for me, a much faster and more efficient
experience. There may be others who feel differently about this and
I'd be interested in hearing their perspective.


On 6/11/2020 4:26 PM, David Csercsics wrote:
While we're on this topic, how does things like OpenBook compare to
scanning apps for the phone, or things like envision AI?





moderated Re: Scanning with Open book versus JAWS

Richard Turner
 

Also, have you tried just unplugging the scanner and plugging it back in?

 

Especially if you updated to Windows 10 2004.

Or you may have to go into the printer and scanner settings and select it again.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mike B
Sent: Thursday, June 11, 2020 6:42 PM
To: main@jfw.groups.io
Subject: Re: Scanning with Open book versus JAWS

 

After you press the, JAWS Key + Spacebar, then, O, for OCR, and press, A , for acquire.

 

 You need to arrow to the scanner to select it in the Convenient OCR / Cameras and Scanners list dialog.  Now tab to, Acquire, and press spacebar or enter.
Take care.  Mike.  Sent from my iBarstool.
 *My body has absorbed so much soap and disinfectant lately that when I pee it cleans the toilet.

----- Original Message -----

From: Ed Culpepper

Sent: Thursday, June 11, 2020 2:38 PM

Subject: Re: Scanning with Open book versus JAWS

 

When I click “Acquire” my computer announces “ Finished – Failed to recognize text.” The scanner has not operated at all at this point. I have only 1 scanner and it is recognized in the “Convenient OCR” “Cameras and Scanners”  dialog. Any ideas why the scanner is not engaged or suggestions I might try to produce scanning?

 

J Edward Culpepper, PhD

Huntsville, Alabama

 


moderated Re: Scanning with Open book versus JAWS

Mike B
 

After you press the, JAWS Key + Spacebar, then, O, for OCR, and press, A , for acquire.
 
 You need to arrow to the scanner to select it in the Convenient OCR / Cameras and Scanners list dialog.  Now tab to, Acquire, and press spacebar or enter.
Take care.  Mike.  Sent from my iBarstool.
 *My body has absorbed so much soap and disinfectant lately that when I pee it cleans the toilet.

----- Original Message -----
Sent: Thursday, June 11, 2020 2:38 PM
Subject: Re: Scanning with Open book versus JAWS

When I click “Acquire” my computer announces “ Finished – Failed to recognize text.” The scanner has not operated at all at this point. I have only 1 scanner and it is recognized in the “Convenient OCR” “Cameras and Scanners”  dialog. Any ideas why the scanner is not engaged or suggestions I might try to produce scanning?

 

J Edward Culpepper, PhD

Huntsville, Alabama

 


moderated Re: Scanning with Open book versus JAWS

Dean Martineau <topdot@...>
 

I don't think OpenBook is the equal of Kurzweil 1000. Neither product is really being developed, but I'm glad I have K1000, because when I tried OpenBook, results weren't as good. Reading books is far easier with one of these programs, or perhaps a desktop off-the-shelf program, than with a phone.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Loy
Sent: Thursday, June 11, 2020 5:47 PM
To: main@jfw.groups.io
Subject: Re: Scanning with Open book versus JAWS

I use my IPhone with Voice dream Scanner for quick scans of mail or to
quickly find out what an item on my desk is. It is remarkably accurate .
But for important items I do use a flat bed scanner.
----- Original Message -----
From: "David Goldfield" <david.goldfield@...>
To: <main@jfw.groups.io>
Sent: Thursday, June 11, 2020 4:58 PM
Subject: Re: Scanning with Open book versus JAWS


Honestly, my opinion is that scanning material with a flatbed scanner is
always going to be a bit easier than using a phone unless you have a stand
that can position your phone in a stationary location. Even then starting
a scanner from a PC keyboard and using that keyboard to quickly save a
document or copy and paste that scanned text into another document is, at
least for me, a much faster and more efficient experience. There may be
others who feel differently about this and I'd be interested in hearing
their perspective.


On 6/11/2020 4:26 PM, David Csercsics wrote:
While we're on this topic, how does things like OpenBook compare to
scanning apps for the phone, or things like envision AI?





moderated Re: excel - defining names

Joe
 

Hello,

You almost got everything right but the syntax.

  • Make sure you are in the cell you wish to make the beginning of your column headers.
  • Use the Alt + M,M,D key combination you used before
  • In the edit box Type “Title” followed by whatever you want to call the worksheet without spaces. For Example “TitleSheet1”.
  • Follow this with two periods without Spaces
  • Put the ending point of your Data area with the cell coordinate for example D30”
  • This will give you both column headers and row headers.
  • You can then use the Jaws command or just simply move from column to column and Jaws will announce the change.

This was the method that Dan Clark suggested from Vispero.

Picture of Owl with Mortar Board and Computer

Dr. Joe L. Todd CVRT

                Phone: 616.951.2142

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Juan Hernandez
Sent: Thursday, June 11, 2020 6:01 PM
To: main@jfw.groups.io
Subject: excel - defining names

 

HI All,

 

I am trying to make my excel spreadsheet read the column names and row names when using the jaws+alt+shift+r or C commands that jaws provides.

 

So I did the following:

 

First I went to column a1, where it says product name

Then I hit alt+m, m, d which loads the define names dialog box and typed product name.

I then pressed ok, and when I go down the colllumn and hit jaws+alt+shift+c it says no column name

 

Can someone please advise me as to what I’m doing wrong?

 

Best,

 

juan


moderated Re: Podcast, New Feature

JM Casey
 

Huh…well, that is interesting indeed. Does anyone actually use their computer in portrait mode? Even most laptop screens are not shaped like phone screens and you’d think that would also make everything display very weirdly.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shan Noyes
Sent: June 11, 2020 10:05 AM
To: main@jfw.groups.io
Subject: Re: Podcast, New Feature
Importance: High

 

The interesting thing is that the issue doesn’t show up on all laptops  using the Realtek  drivers.  I have a HP laptop and it is running windows 10 1909 haven’t pulled down or had the latest version pushed to me yet, but I’ve never had this sound problem.

 

But if you want to read on I’ll tell you about an issue I had with my laptop when I upgraded to windows 10 18.03 version.  It’s a weird story and the solution was insane. But it fixed my issues.  I actually worked with Freedom Scientific, and it was the accessibility folks at Microsoft the tier 3 folks who solved it.

 

My laptop is a fully loaded system 20 gb of ram 5.1 surround sound with a touch screen. 

 

Yes, I know I didn’t need some of these features like the h HG screen but the system came with dual AC wireless and I loved the keyboard action.  I’m a little picky when it comes to the keyboard and so tested out lots of systems before purchasing one.

 

Anyways, my system worked fine with windows 10 17.09.  however, after upgrading to the 18.03 release I discovered a very annoying bug.

 

The keyboard echo worked fine as long as I was working on the desktop or in a ms office product.  When you typed the characters would be spoken correctly.  Or words for that matter. 

 

However, when one launched an internet browser to go to the web suddenly the keyboard echo was insane.  When you hit a character it did not report the character properly.  E.g. hit the letter w and it might say r

 

The interesting thing was if you went back and reviewed what you had typed the characters were reported as expected.

 

I thought maybe it was a keyboard driver.  It wasn’t. Microsoft the first folks checked that.  no the driver was upto date.  We then checked the sound drivers they were up to date.

 

Note: this browser issue happened with narrator as well.

 

So the tier I folks ended up passing me to the tier 2 folks.  They checked things out as well. No good.  So they passed me back to the tier 3 folks.

 

So had to set up a time for the tier 3 folks to call me.  When they did we set up a remote session so they could come on to my laptop.  And with in 5 minutes the issue was fixed.

 

Hold it wait!!!!

 

I bet none of you will guess what the solution was.  I still shake my head when thinking about it.  But the solution just goes to show you how interrelated the windows code is.

 

The solution was to lock my screen into land scape mode.  As soon as we did this, everything worked fine.  In any web browser when a person hit the letter w it said w. etc.

 

So that’s my weird solution and story about windows10.

 

Have a good day everyone.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of James Homuth via groups.io
Sent: Thursday, June 11, 2020 7:41 AM
To: main@jfw.groups.io
Subject: Re: Podcast, New Feature

 

-------------------------------------------------------------
WARNING, this email originated from outside of SaskTel.
Do not click links or open attachments unless you trust the sender and believe the contents are safe.
--------------------------------------------------------------

That’s very common especially with Dell laptops, but basically anything with a Realtek driver. My solution was a registry tweak. Not sure if it will survive a driver update, but I haven’t had the problem since I changed the required entries, so I’m good.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shan Noyes
Sent: June 11, 2020 9:32 AM
To: main@jfw.groups.io
Subject: Re: Podcast, New Feature

 

Yes, what is happening is to save power some sound card drivers are putting the card into a sleep or shutdown mode and so when Jaws goes to send info to the sound card it has to wake up.  This isn’t happening to everyone.  The solution was a small program was written that continually sends something to the card to keep it active. And that way it didn’t have to wake up.

 

In the June release of Jaws they are going to build this feature of keeping the card awake as an option that a person can turn on if they are experiencing the issue.

 

Have a good day.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Hicks Steven (CORNWALL IT SERVICES) via groups.io
Sent: Thursday, June 11, 2020 6:09 AM
To: main@jfw.groups.io
Subject: Podcast, New Feature

 

-------------------------------------------------------------
WARNING, this email originated from outside of SaskTel.
Do not click links or open attachments unless you trust the sender and believe the contents are safe.
--------------------------------------------------------------

Hi,

 

Not sure if anyone has listened to the latest podcast but there was an option mentioned for some laptops that cut off the first part of speech with bluetooth headphones, did anyone listen to this?

 

 

 

 

Steven Hicks.

Servicedesk 2 Team Leader.

Tel:  01209 318620.

Mobile:  07393 792548.

EMail:  Steven.Hicks@....

 



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail

NOTICE: This confidential e-mail message is only for the intended recipients. If you are not the intended recipient, be advised that disclosing, copying, distributing, or any other use of this message, is strictly prohibited. In such case, please destroy this message and notify the sender.

NOTICE: This confidential e-mail message is only for the intended recipients. If you are not the intended recipient, be advised that disclosing, copying, distributing, or any other use of this message, is strictly prohibited. In such case, please destroy this message and notify the sender.


moderated excel - defining names

Juan Hernandez
 

HI All,

 

I am trying to make my excel spreadsheet read the column names and row names when using the jaws+alt+shift+r or C commands that jaws provides.

 

So I did the following:

 

First I went to column a1, where it says product name

Then I hit alt+m, m, d which loads the define names dialog box and typed product name.

I then pressed ok, and when I go down the colllumn and hit jaws+alt+shift+c it says no column name

 

Can someone please advise me as to what I’m doing wrong?

 

Best,

 

juan