Date   

18.1 Beta Speaker Behavior

Dave Mitchell
 

Hi All:  I note slight speech hesitation and a little speaker pop when 18.1 begins initial speech.  After this noticeable uneven start, most  subsequent speech seems to roll along as has been the case with 17.
I am just wondering if anyone else has noticed  this as, at least to me, it is annoying.  I use the Eloquence voice.  Thanks, Mitch
 
“Disappointments should be cremated, not embalmed.” 
                               (Henry Haskins)



Re: Editing footnotes in JAWS

Marquette, Ed <Ed.Marquette@...>
 

Actually, it may take 3 taps of F-6, depending on how many panes are open. I have been successful in Word 2013 in just arrowing out of the footnote, which surprised me because I don't think I could do that in Word 2010.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, September 8, 2016 8:26 AM
To: main@jfw.groups.io
Subject: Re: Editing footnotes in JAWS

F6 should return you to the document.
At 07:14 AM 9/8/2016, you wrote:
A related question: once I'm finished typing a new footnote, how do I
go back to the place in the document I was editing?

On 9/8/16, Marquette, Ed <Ed.Marquette@kutakrock.com> wrote:
Once inside the footnote, editing is no problem, though in large
documents, JAWS sometimes slows to a snail's pace.
If you navigate to the bottom of the page where the footnote is
found, that will put you in the footnote. You can also get their by
searching and finding an item of text found there.
To get rid of a note, navigate to the reference. I use alt + s + o +
n (for
next) or p (for previous. Then, when you find the reference, delete it.



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Aine Kelly
Costello
Sent: Wednesday, September 7, 2016 9:47 PM
To: main@jfw.groups.io
Subject: Editing footnotes in JAWS

Hi all,

How does one edit or delete a previously-written footnote in Word
2013 with JAWS, please? I can make new footnotes for Africa, and I
can read existing ones, but can't work out how to edit/delete them...

I've just joined this group so please excuse me if this has been
asked before.

Many thanks,

Best wishes,

Aine




This E-mail message is confidential, is intended only for the named
recipients above and may contain information that is privileged,
attorney work product or otherwise protected by applicable law. If
you have received this message in error, please notify the sender at
402-346-6000 and delete this E-mail message.
Thank you.




Re: Editing footnotes in JAWS

Ann Byrne
 

F6 should return you to the document.

At 07:14 AM 9/8/2016, you wrote:
A related question: once I'm finished typing a new footnote, how do I
go back to the place in the document I was editing?

On 9/8/16, Marquette, Ed <Ed.Marquette@kutakrock.com> wrote:
Once inside the footnote, editing is no problem, though in large documents,
JAWS sometimes slows to a snail's pace.
If you navigate to the bottom of the page where the footnote is found, that
will put you in the footnote. You can also get their by searching and
finding an item of text found there.
To get rid of a note, navigate to the reference. I use alt + s + o + n (for
next) or p (for previous. Then, when you find the reference, delete it.



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Aine Kelly
Costello
Sent: Wednesday, September 7, 2016 9:47 PM
To: main@jfw.groups.io
Subject: Editing footnotes in JAWS

Hi all,

How does one edit or delete a previously-written footnote in Word 2013 with
JAWS, please? I can make new footnotes for Africa, and I can read existing
ones, but can't work out how to edit/delete them...

I've just joined this group so please excuse me if this has been asked
before.

Many thanks,

Best wishes,

Aine




This E-mail message is confidential, is intended only for the named
recipients above and may contain information
that is privileged, attorney work product or otherwise protected by
applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this
E-mail message.
Thank you.




Re: Editing footnotes in JAWS

Ann Byrne
 

This is from the DeWitt and Associates Word 2010 tutorial:
1. Modifying note text is best done in the View Notes Pane, specifically in the Footnote and Endnote Pane. The View Notes Pane is only visible in Draft View. Turn on Draft View with ALT + CTRL + N.
2. Press ALT + S, then H. The View Notes Dialog Box will open. This dialog box contains two radio buttons: View Endnote Area and View Footnote Area, the latter of which is the default option. Focus will be on the OK Button. TAB to the radio buttons and, using the ARROW Keys, select View Endnote Area. TAB to the OK Button and press SPACEBAR to activate. The View Notes Pane will open. NOTE: When pressing ALT + S, then H, the View Notes Dialog Box will only open if the document contains both footnotes and endnotes such that a choice needs to be made. If the document contains only endnotes or only footnotes, pressing ALT + S, then H will automatically open the View Notes Pane.



1. Press MODIFIER + V to open the Adjust JAWS Options Dialog Box and, using the ARROW Keys, locate the Comments, Footnotes and Endnotes Option. Use SPACEBAR to set the option to "On With Text". Press ENTER. Focus will return to the document.

At 07:14 AM 9/8/2016, you wrote:
A related question: once I'm finished typing a new footnote, how do I
go back to the place in the document I was editing?

On 9/8/16, Marquette, Ed <Ed.Marquette@kutakrock.com> wrote:
Once inside the footnote, editing is no problem, though in large documents,
JAWS sometimes slows to a snail's pace.
If you navigate to the bottom of the page where the footnote is found, that
will put you in the footnote. You can also get their by searching and
finding an item of text found there.
To get rid of a note, navigate to the reference. I use alt + s + o + n (for
next) or p (for previous. Then, when you find the reference, delete it.



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Aine Kelly
Costello
Sent: Wednesday, September 7, 2016 9:47 PM
To: main@jfw.groups.io
Subject: Editing footnotes in JAWS

Hi all,

How does one edit or delete a previously-written footnote in Word 2013 with
JAWS, please? I can make new footnotes for Africa, and I can read existing
ones, but can't work out how to edit/delete them...

I've just joined this group so please excuse me if this has been asked
before.

Many thanks,

Best wishes,

Aine




This E-mail message is confidential, is intended only for the named
recipients above and may contain information
that is privileged, attorney work product or otherwise protected by
applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this
E-mail message.
Thank you.




Re: Editing footnotes in JAWS

kelby carlson
 

A related question: once I'm finished typing a new footnote, how do I
go back to the place in the document I was editing?

On 9/8/16, Marquette, Ed <Ed.Marquette@kutakrock.com> wrote:
Once inside the footnote, editing is no problem, though in large documents,
JAWS sometimes slows to a snail's pace.
If you navigate to the bottom of the page where the footnote is found, that
will put you in the footnote. You can also get their by searching and
finding an item of text found there.
To get rid of a note, navigate to the reference. I use alt + s + o + n (for
next) or p (for previous. Then, when you find the reference, delete it.



-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Aine Kelly
Costello
Sent: Wednesday, September 7, 2016 9:47 PM
To: main@jfw.groups.io
Subject: Editing footnotes in JAWS

Hi all,

How does one edit or delete a previously-written footnote in Word 2013 with
JAWS, please? I can make new footnotes for Africa, and I can read existing
ones, but can't work out how to edit/delete them...

I've just joined this group so please excuse me if this has been asked
before.

Many thanks,

Best wishes,

Aine




This E-mail message is confidential, is intended only for the named
recipients above and may contain information
that is privileged, attorney work product or otherwise protected by
applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this
E-mail message.
Thank you.




Re: Editing footnotes in JAWS

Marquette, Ed <Ed.Marquette@...>
 

Once inside the footnote, editing is no problem, though in large documents, JAWS sometimes slows to a snail's pace.
If you navigate to the bottom of the page where the footnote is found, that will put you in the footnote. You can also get their by searching and finding an item of text found there.
To get rid of a note, navigate to the reference. I use alt + s + o + n (for next) or p (for previous. Then, when you find the reference, delete it.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Aine Kelly Costello
Sent: Wednesday, September 7, 2016 9:47 PM
To: main@jfw.groups.io
Subject: Editing footnotes in JAWS

Hi all,

How does one edit or delete a previously-written footnote in Word 2013 with JAWS, please? I can make new footnotes for Africa, and I can read existing ones, but can't work out how to edit/delete them...

I've just joined this group so please excuse me if this has been asked before.

Many thanks,

Best wishes,

Aine




This E-mail message is confidential, is intended only for the named recipients above and may contain information
that is privileged, attorney work product or otherwise protected by applicable law. If you have received this
message in error, please notify the sender at 402-346-6000 and delete this E-mail message.
Thank you.


Editing footnotes in JAWS

Aine Kelly Costello <ainekc@...>
 

Hi all,

How does one edit or delete a previously-written footnote in Word 2013
with JAWS, please? I can make new footnotes for Africa, and I can read
existing ones, but can't work out how to edit/delete them...

I've just joined this group so please excuse me if this has been asked before.

Many thanks,

Best wishes,

Aine


how to import ms access tables into sql management studio developer 64 bit 2014

Marvin Hunkin <startrekcafe@...>
 

Hi. was wondering, got sql management studio, and created a ms access database, now how to import my access tables into sql management studio, when I try this, and run as admin, get error messages saying the process is running, the files are in another program, but I don’t open them, using sql management studio development 64 bit version. Any tips, links, or is there a script I can run, to get these tables into sql management studio 2014.

Thanks.

 


Re: Notepad/Wordpad

kelby carlson
 

Actually I spoke too soon. Still running into the problem. It only
seems to happen if I open a file through Windows explorer; if I open
it directly in Notepad it's usually fine, though not always.

On 9/7/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Okay, thought so. At least one problem solved.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, September 07, 2016 10:52 AM
Subject: Re: Notepad/Wordpad


Okay, turns out my screen was rotated. We got that straightened out
and it seems to have fixed the Notepad issue. I deleted the Wordpad
configuration file as well, but that problem still remains.

On 9/7/16, kelby carlson <kelbycarlson@gmail.com> wrote:
Is that in the app data directory?



On 9/7/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
In your shared settings folder. Delete any file that has the name
notepad.xxx and wordpad.xxx. There may be more than one with different
extensions.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, September 07, 2016 05:37 AM
Subject: Re: Notepad/Wordpad


What is the best way to delete/restore the original Notepad/Wordpad
scripts?

I'm not sure what has happened; I didn't have this problem until a few
days ago, and I've had the computer for a couple of weeks.

On 9/6/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Cousin Kelty,

You'll need to find your graphics properties, usually from your
desktop,
with nothing selected, and pressing your Applications key (or
Shift+F10).
Look for anything in that menu like NVDIA, or some other graphics card
you
have.

However, first have someone sighted look at your screen to make sure
it's
actually not right-side-up.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Tuesday, September 06, 2016 10:44 AM
Subject: Re: Notepad/Wordpad


How would I go about finding those key combinations? I don't think
that's what happened but it's worth checking.



On 9/5/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Cousin Kelty,

By any chance are you using a laptop? If so, there's a way using
combination

keystrokes to rotate the screen 90, 180, and 270 degrees with some
graphics

cards. If that has happened, some programs may just not work at all.
Do
you

have someone sighted who can look at your screen?

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Monday, September 05, 2016 04:03 PM
Subject: Re: Notepad/Wordpad


We'll have to see ... I haven't had much luck with them in the past.

On 9/5/16, Alan Robbins <alan1057@me.com> wrote:
I guess at this point a call to FS support may be your best bet

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
kelby
carlson
Sent: Monday, September 05, 2016 1:15 PM
To: main@jfw.groups.io
Subject: Re: Notepad/Wordpad

Nope; that didn't work either.

On 9/5/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Try maximizing the window to see if that is the issue.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Monday, September 05, 2016 07:37 AM
Subject: Notepad/Wordpad


I am have Jaws issues in Notepad and Wordpad in Windows 10:

Notepad: I can read by paragraph, but when I try to down arrow
through
a document JAWS just says "blank".

- Wordpad: It takes several times of the move paragraph command to
make JAWS move to the next paragraph.

I know this is a JAWS issue because I've tested it with NVDA and
gotten no problem.



































Re: Notepad/Wordpad

Dave...
 

Okay, thought so. At least one problem solved.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, September 07, 2016 10:52 AM
Subject: Re: Notepad/Wordpad


Okay, turns out my screen was rotated. We got that straightened out
and it seems to have fixed the Notepad issue. I deleted the Wordpad
configuration file as well, but that problem still remains.

On 9/7/16, kelby carlson <kelbycarlson@gmail.com> wrote:
Is that in the app data directory?



On 9/7/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
In your shared settings folder. Delete any file that has the name
notepad.xxx and wordpad.xxx. There may be more than one with different
extensions.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, September 07, 2016 05:37 AM
Subject: Re: Notepad/Wordpad


What is the best way to delete/restore the original Notepad/Wordpad
scripts?

I'm not sure what has happened; I didn't have this problem until a few
days ago, and I've had the computer for a couple of weeks.

On 9/6/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Cousin Kelty,

You'll need to find your graphics properties, usually from your desktop,
with nothing selected, and pressing your Applications key (or
Shift+F10).
Look for anything in that menu like NVDIA, or some other graphics card
you
have.

However, first have someone sighted look at your screen to make sure
it's
actually not right-side-up.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Tuesday, September 06, 2016 10:44 AM
Subject: Re: Notepad/Wordpad


How would I go about finding those key combinations? I don't think
that's what happened but it's worth checking.



On 9/5/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Cousin Kelty,

By any chance are you using a laptop? If so, there's a way using
combination

keystrokes to rotate the screen 90, 180, and 270 degrees with some
graphics

cards. If that has happened, some programs may just not work at all. Do
you

have someone sighted who can look at your screen?

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Monday, September 05, 2016 04:03 PM
Subject: Re: Notepad/Wordpad


We'll have to see ... I haven't had much luck with them in the past.

On 9/5/16, Alan Robbins <alan1057@me.com> wrote:
I guess at this point a call to FS support may be your best bet

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
kelby
carlson
Sent: Monday, September 05, 2016 1:15 PM
To: main@jfw.groups.io
Subject: Re: Notepad/Wordpad

Nope; that didn't work either.

On 9/5/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Try maximizing the window to see if that is the issue.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Monday, September 05, 2016 07:37 AM
Subject: Notepad/Wordpad


I am have Jaws issues in Notepad and Wordpad in Windows 10:

Notepad: I can read by paragraph, but when I try to down arrow
through
a document JAWS just says "blank".

- Wordpad: It takes several times of the move paragraph command to
make JAWS move to the next paragraph.

I know this is a JAWS issue because I've tested it with NVDA and
gotten no problem.






























subscribe

George Gray
 

--
HAVE A MAGNIFICENT DAY

GEORGE BURRELL GRAY

Ocean Winds
Cabarete/Sosua
REPUBLICA DOMINICANA


Recognizing a Graphic

kelby carlson
 

What is the best way to recognize a Facebook photo that contains text?
I've tried insert-space, o, c to scan the current control, but I don't
get anything. I haven't used the feature very much so am still trying
to get acquainted with it.


Re: List all Virtual Elements

kelby carlson
 

I found it; its windows+;.

On 9/7/16, Gudrun Brunot <gbrunot@centurylink.net> wrote:
I believe that insert-control-o lists objects.



Gudrun

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Pablo
Morales
Sent: Wednesday, September 07, 2016 12:53 PM
To: main@jfw.groups.io
Subject: Re: List all Virtual Elements

List of..
Insert + control+ B; list of buttons
Insert + control + x; list of checkboxes Insert + control + a; list of radio
buttons Insert + control + navigation keystroke gives a list of the control
that you want.

element
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard
Weitzel
Sent: Wednesday, September 7, 2016 1:01 PM
To: main@jfw.groups.io
Subject: Re: List all Virtual Elements

I only know of Jaws Key+F3 which lists all virtual elements, but it doesn't
actually list each individual link, button, form field etc, instead it
gives you a list like this:

Anchors list
Block quotes list
Buttons list
Checkboxes list
It goes on, with my Jaws 17 Copy it tells me when I bring it up and it
announces the first one, Anchors List, that it is 1 of 19.
Then of course there are the keystrokes to bring some of these up
individually, e.g. Jaws Key+F5 for form fields, Jaws Key+F6 for the headings
list, Jaws Key+F7 for the links list etc.
I actually don't know of a keystroke to bring up let's say the buttons list
or anchors list, but that doesn't mean there isn't one and it's easy to get
to that via the virtual HTML elements list.

Keep in mind that if you forget you can always go to a website, turn on
keyboard help with Jaws Key+F1 and then press keys and function keys to hear
what they are.


Regards,
Sieghard

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of kelby
carlson
Sent: Wednesday, September 07, 2016 7:24 AM
To: main@jfw.groups.io
Subject: List all Virtual Elements

I know there is a key that will list all of the virtual elements on a page
or in a document, but I can't find it in the list of keystrokes.
I believe it used a ; but am not sure.














Re: List all Virtual Elements

Gudrun Brunot
 

I believe that insert-control-o lists objects.



Gudrun

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Pablo Morales
Sent: Wednesday, September 07, 2016 12:53 PM
To: main@jfw.groups.io
Subject: Re: List all Virtual Elements

List of..
Insert + control+ B; list of buttons
Insert + control + x; list of checkboxes Insert + control + a; list of radio buttons Insert + control + navigation keystroke gives a list of the control that you want.

element
-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel
Sent: Wednesday, September 7, 2016 1:01 PM
To: main@jfw.groups.io
Subject: Re: List all Virtual Elements

I only know of Jaws Key+F3 which lists all virtual elements, but it doesn't actually list each individual link, button, form field etc, instead it gives you a list like this:

Anchors list
Block quotes list
Buttons list
Checkboxes list
It goes on, with my Jaws 17 Copy it tells me when I bring it up and it announces the first one, Anchors List, that it is 1 of 19.
Then of course there are the keystrokes to bring some of these up individually, e.g. Jaws Key+F5 for form fields, Jaws Key+F6 for the headings list, Jaws Key+F7 for the links list etc.
I actually don't know of a keystroke to bring up let's say the buttons list or anchors list, but that doesn't mean there isn't one and it's easy to get to that via the virtual HTML elements list.

Keep in mind that if you forget you can always go to a website, turn on keyboard help with Jaws Key+F1 and then press keys and function keys to hear what they are.


Regards,
Sieghard

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of kelby carlson
Sent: Wednesday, September 07, 2016 7:24 AM
To: main@jfw.groups.io
Subject: List all Virtual Elements

I know there is a key that will list all of the virtual elements on a page or in a document, but I can't find it in the list of keystrokes.
I believe it used a ; but am not sure.


Re: List all Virtual Elements

Pablo Morales
 

List of..
Insert + control+ B; list of buttons
Insert + control + x; list of checkboxes
Insert + control + a; list of radio buttons
Insert + control + navigation keystroke gives a list of the control that you want.

element

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel
Sent: Wednesday, September 7, 2016 1:01 PM
To: main@jfw.groups.io
Subject: Re: List all Virtual Elements

I only know of Jaws Key+F3 which lists all virtual elements, but it doesn't actually list each individual link, button, form field etc, instead it gives you a list like this:

Anchors list
Block quotes list
Buttons list
Checkboxes list
It goes on, with my Jaws 17 Copy it tells me when I bring it up and it announces the first one, Anchors List, that it is 1 of 19.
Then of course there are the keystrokes to bring some of these up individually, e.g. Jaws Key+F5 for form fields, Jaws Key+F6 for the headings list, Jaws Key+F7 for the links list etc.
I actually don't know of a keystroke to bring up let's say the buttons list or anchors list, but that doesn't mean there isn't one and it's easy to get to that via the virtual HTML elements list.

Keep in mind that if you forget you can always go to a website, turn on keyboard help with Jaws Key+F1 and then press keys and function keys to hear what they are.


Regards,
Sieghard

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of kelby carlson
Sent: Wednesday, September 07, 2016 7:24 AM
To: main@jfw.groups.io
Subject: List all Virtual Elements

I know there is a key that will list all of the virtual elements on a page or in a document, but I can't find it in the list of keystrokes.
I believe it used a ; but am not sure.


Re: Notepad/Wordpad

david
 

Hello there;
I believe you can turn off the graphics options hotkeys shortcuts,
By doing the following;

1, desktop,
Ctrl+spacebar, or, the f5 key to unselect icon,

2, press the applications key,
Down arrow until you hear,
Graphics options sub-menu,
Right arrow to open, you will hear hotkeys,sub-menu,
Now down arrow and press enter on,
Disable.
Hope this helps.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of kelby carlson
Sent: Wednesday, September 7, 2016 1:53 PM
To: main@jfw.groups.io
Subject: Re: Notepad/Wordpad

Okay, turns out my screen was rotated. We got that straightened out
and it seems to have fixed the Notepad issue. I deleted the Wordpad
configuration file as well, but that problem still remains.

On 9/7/16, kelby carlson <kelbycarlson@gmail.com> wrote:
Is that in the app data directory?



On 9/7/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
In your shared settings folder. Delete any file that has the name
notepad.xxx and wordpad.xxx. There may be more than one with different
extensions.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, September 07, 2016 05:37 AM
Subject: Re: Notepad/Wordpad


What is the best way to delete/restore the original Notepad/Wordpad
scripts?

I'm not sure what has happened; I didn't have this problem until a few
days ago, and I've had the computer for a couple of weeks.

On 9/6/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Cousin Kelty,

You'll need to find your graphics properties, usually from your desktop,
with nothing selected, and pressing your Applications key (or
Shift+F10).
Look for anything in that menu like NVDIA, or some other graphics card
you
have.

However, first have someone sighted look at your screen to make sure
it's
actually not right-side-up.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Tuesday, September 06, 2016 10:44 AM
Subject: Re: Notepad/Wordpad


How would I go about finding those key combinations? I don't think
that's what happened but it's worth checking.



On 9/5/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Cousin Kelty,

By any chance are you using a laptop? If so, there's a way using
combination

keystrokes to rotate the screen 90, 180, and 270 degrees with some
graphics

cards. If that has happened, some programs may just not work at all. Do
you

have someone sighted who can look at your screen?

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Monday, September 05, 2016 04:03 PM
Subject: Re: Notepad/Wordpad


We'll have to see ... I haven't had much luck with them in the past.

On 9/5/16, Alan Robbins <alan1057@me.com> wrote:
I guess at this point a call to FS support may be your best bet

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
kelby
carlson
Sent: Monday, September 05, 2016 1:15 PM
To: main@jfw.groups.io
Subject: Re: Notepad/Wordpad

Nope; that didn't work either.

On 9/5/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Try maximizing the window to see if that is the issue.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Monday, September 05, 2016 07:37 AM
Subject: Notepad/Wordpad


I am have Jaws issues in Notepad and Wordpad in Windows 10:

Notepad: I can read by paragraph, but when I try to down arrow
through
a document JAWS just says "blank".

- Wordpad: It takes several times of the move paragraph command to
make JAWS move to the next paragraph.

I know this is a JAWS issue because I've tested it with NVDA and
gotten no problem.






























Re: Notepad/Wordpad

kelby carlson
 

Okay, turns out my screen was rotated. We got that straightened out
and it seems to have fixed the Notepad issue. I deleted the Wordpad
configuration file as well, but that problem still remains.

On 9/7/16, kelby carlson <kelbycarlson@gmail.com> wrote:
Is that in the app data directory?



On 9/7/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
In your shared settings folder. Delete any file that has the name
notepad.xxx and wordpad.xxx. There may be more than one with different
extensions.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, September 07, 2016 05:37 AM
Subject: Re: Notepad/Wordpad


What is the best way to delete/restore the original Notepad/Wordpad
scripts?

I'm not sure what has happened; I didn't have this problem until a few
days ago, and I've had the computer for a couple of weeks.

On 9/6/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Cousin Kelty,

You'll need to find your graphics properties, usually from your desktop,
with nothing selected, and pressing your Applications key (or
Shift+F10).
Look for anything in that menu like NVDIA, or some other graphics card
you
have.

However, first have someone sighted look at your screen to make sure
it's
actually not right-side-up.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Tuesday, September 06, 2016 10:44 AM
Subject: Re: Notepad/Wordpad


How would I go about finding those key combinations? I don't think
that's what happened but it's worth checking.



On 9/5/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Cousin Kelty,

By any chance are you using a laptop? If so, there's a way using
combination

keystrokes to rotate the screen 90, 180, and 270 degrees with some
graphics

cards. If that has happened, some programs may just not work at all. Do
you

have someone sighted who can look at your screen?

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Monday, September 05, 2016 04:03 PM
Subject: Re: Notepad/Wordpad


We'll have to see ... I haven't had much luck with them in the past.

On 9/5/16, Alan Robbins <alan1057@me.com> wrote:
I guess at this point a call to FS support may be your best bet

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
kelby
carlson
Sent: Monday, September 05, 2016 1:15 PM
To: main@jfw.groups.io
Subject: Re: Notepad/Wordpad

Nope; that didn't work either.

On 9/5/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Try maximizing the window to see if that is the issue.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Monday, September 05, 2016 07:37 AM
Subject: Notepad/Wordpad


I am have Jaws issues in Notepad and Wordpad in Windows 10:

Notepad: I can read by paragraph, but when I try to down arrow
through
a document JAWS just says "blank".

- Wordpad: It takes several times of the move paragraph command to
make JAWS move to the next paragraph.

I know this is a JAWS issue because I've tested it with NVDA and
gotten no problem.






























Re: Notepad/Wordpad

kelby carlson
 

Is that in the app data directory?

On 9/7/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
In your shared settings folder. Delete any file that has the name
notepad.xxx and wordpad.xxx. There may be more than one with different
extensions.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Wednesday, September 07, 2016 05:37 AM
Subject: Re: Notepad/Wordpad


What is the best way to delete/restore the original Notepad/Wordpad
scripts?

I'm not sure what has happened; I didn't have this problem until a few
days ago, and I've had the computer for a couple of weeks.

On 9/6/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Cousin Kelty,

You'll need to find your graphics properties, usually from your desktop,
with nothing selected, and pressing your Applications key (or Shift+F10).
Look for anything in that menu like NVDIA, or some other graphics card
you
have.

However, first have someone sighted look at your screen to make sure it's
actually not right-side-up.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Tuesday, September 06, 2016 10:44 AM
Subject: Re: Notepad/Wordpad


How would I go about finding those key combinations? I don't think
that's what happened but it's worth checking.



On 9/5/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Cousin Kelty,

By any chance are you using a laptop? If so, there's a way using
combination

keystrokes to rotate the screen 90, 180, and 270 degrees with some
graphics

cards. If that has happened, some programs may just not work at all. Do
you

have someone sighted who can look at your screen?

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Monday, September 05, 2016 04:03 PM
Subject: Re: Notepad/Wordpad


We'll have to see ... I haven't had much luck with them in the past.

On 9/5/16, Alan Robbins <alan1057@me.com> wrote:
I guess at this point a call to FS support may be your best bet

Al

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of kelby
carlson
Sent: Monday, September 05, 2016 1:15 PM
To: main@jfw.groups.io
Subject: Re: Notepad/Wordpad

Nope; that didn't work either.

On 9/5/16, Dave Carlson <dgcarlson@sbcglobal.net> wrote:
Try maximizing the window to see if that is the issue.

Dave Carlson
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "kelby carlson" <kelbycarlson@gmail.com>
To: <main@jfw.groups.io>
Sent: Monday, September 05, 2016 07:37 AM
Subject: Notepad/Wordpad


I am have Jaws issues in Notepad and Wordpad in Windows 10:

Notepad: I can read by paragraph, but when I try to down arrow through
a document JAWS just says "blank".

- Wordpad: It takes several times of the move paragraph command to
make JAWS move to the next paragraph.

I know this is a JAWS issue because I've tested it with NVDA and
gotten no problem.




























Re: List all Virtual Elements

 

I only know of Jaws Key+F3 which lists all virtual elements, but it doesn't actually list each individual link, button, form field etc, instead it gives you a list like this:

Anchors list
Block quotes list
Buttons list
Checkboxes list
It goes on, with my Jaws 17 Copy it tells me when I bring it up and it announces the first one, Anchors List, that it is 1 of 19.
Then of course there are the keystrokes to bring some of these up individually, e.g. Jaws Key+F5 for form fields, Jaws Key+F6 for the headings list, Jaws Key+F7 for the links list etc.
I actually don't know of a keystroke to bring up let's say the buttons list or anchors list, but that doesn't mean there isn't one and it's easy to get to that via the virtual HTML elements list.

Keep in mind that if you forget you can always go to a website, turn on keyboard help with Jaws Key+F1 and then press keys and function keys to hear what they are.


Regards,
Sieghard

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of kelby carlson
Sent: Wednesday, September 07, 2016 7:24 AM
To: main@jfw.groups.io
Subject: List all Virtual Elements

I know there is a key that will list all of the virtual elements on a page or in a document, but I can't find it in the list of keystrokes.
I believe it used a ; but am not sure.


Antivirus question about settings for Internet

Tusing <ptusing@...>
 

HI,

Is  it true as  I have heard that if one removes

A v g

One loses every change one may have picked as a setting on the

Internet to work  better with JAWS?

 

Please suggest some way around if this is actually true.

 

Am  using Windows 7 and JAWS 16.

 

Have a fine day.