Date   

moderated Re: Two questions regarding Jaws 2021.

Randy Barnett
 


do you have a microphone on your computer or laptop or one that you can plug-in? If you don't have a microphone maybe it doesn't show up. This is just guessing though. As for removing an update you can't do that the download you have to get from freedom scientific is already updated. If you have an old EXC you can use that and not update but short of that no you can't remove an update.
Randy Barnett

On Feb 5, 2021, at 10:15 AM, T. Civitello <tcivi31@...> wrote:


I am running the current version of Jaws and I do not find a voice assistant in the utility menu.  Tom
 
Sent: Friday, February 05, 2021 9:55 AM
Subject: Re: Two questions regarding Jaws 2021.
 

I hope someone can answer about removing updates, but I am doubtful that can be done.

You can run the .exe file that you used to install Jaws 2021 and you will have an option to repair.

 

For me, the first item under Utilities is the voice assistant.

Are you sure you are on 2021?

 

I thought there was an option about the lost focus messages, but I’m not finding it right now.

 

HTH,

 

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Albert Cutolo
Sent: Friday, February 5, 2021 9:38 AM
To: main@jfw.groups.io
Subject: Two questions regarding Jaws 2021.

 

Good afternoon everyone, 

First, how would I go about doing a repair of Jaws 2021,  and can you remove a specific  update.  ,  I’m asking because whenever my computer boots up, I keep getting a lot of lost focus messages. Next, after I type whatever the subject line and tab to the edit field,  it indicates a dash    

Second, In the settings menu under the utilities option,  there isn’t anything about  enabling the  voice assistant.

Thanks in advance

for any and all help advice and suggestions,      

Al 


moderated Re: Two questions regarding Jaws 2021.

Richard Turner
 

Well, for me, Voice Assistant is right above Tandem.

Maybe someone who knows much more than I, which is a lot of people, can say if there is somewhere else you have to enable it first?

 

 

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of T. Civitello
Sent: Friday, February 5, 2021 10:16 AM
To: main@jfw.groups.io
Subject: Re: Two questions regarding Jaws 2021.

 

I am running the current version of Jaws and I do not find a voice assistant in the utility menu.  Tom

 

Sent: Friday, February 05, 2021 9:55 AM

Subject: Re: Two questions regarding Jaws 2021.

 

I hope someone can answer about removing updates, but I am doubtful that can be done.

You can run the .exe file that you used to install Jaws 2021 and you will have an option to repair.

 

For me, the first item under Utilities is the voice assistant.

Are you sure you are on 2021?

 

I thought there was an option about the lost focus messages, but I’m not finding it right now.

 

HTH,

 

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Albert Cutolo
Sent: Friday, February 5, 2021 9:38 AM
To: main@jfw.groups.io
Subject: Two questions regarding Jaws 2021.

 

Good afternoon everyone, 

First, how would I go about doing a repair of Jaws 2021,  and can you remove a specific  update.  ,  I’m asking because whenever my computer boots up, I keep getting a lot of lost focus messages. Next, after I type whatever the subject line and tab to the edit field,  it indicates a dash    

Second, In the settings menu under the utilities option,  there isn’t anything about  enabling the  voice assistant.

Thanks in advance

for any and all help advice and suggestions,      

Al 


moderated Re: Two questions regarding Jaws 2021.

T. Civitello
 

I am running the current version of Jaws and I do not find a voice assistant in the utility menu.  Tom
 

Sent: Friday, February 05, 2021 9:55 AM
Subject: Re: Two questions regarding Jaws 2021.
 

I hope someone can answer about removing updates, but I am doubtful that can be done.

You can run the .exe file that you used to install Jaws 2021 and you will have an option to repair.

 

For me, the first item under Utilities is the voice assistant.

Are you sure you are on 2021?

 

I thought there was an option about the lost focus messages, but I’m not finding it right now.

 

HTH,

 

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Albert Cutolo
Sent: Friday, February 5, 2021 9:38 AM
To: main@jfw.groups.io
Subject: Two questions regarding Jaws 2021.

 

Good afternoon everyone, 

First, how would I go about doing a repair of Jaws 2021,  and can you remove a specific  update.  ,  I’m asking because whenever my computer boots up, I keep getting a lot of lost focus messages. Next, after I type whatever the subject line and tab to the edit field,  it indicates a dash    

Second, In the settings menu under the utilities option,  there isn’t anything about  enabling the  voice assistant.

Thanks in advance

for any and all help advice and suggestions,      

Al 


moderated Re: Two questions regarding Jaws 2021.

Richard Turner
 

I hope someone can answer about removing updates, but I am doubtful that can be done.

You can run the .exe file that you used to install Jaws 2021 and you will have an option to repair.

 

For me, the first item under Utilities is the voice assistant.

Are you sure you are on 2021?

 

I thought there was an option about the lost focus messages, but I’m not finding it right now.

 

HTH,

 

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Albert Cutolo
Sent: Friday, February 5, 2021 9:38 AM
To: main@jfw.groups.io
Subject: Two questions regarding Jaws 2021.

 

Good afternoon everyone, 

First, how would I go about doing a repair of Jaws 2021,  and can you remove a specific  update.  ,  I’m asking because whenever my computer boots up, I keep getting a lot of lost focus messages. Next, after I type whatever the subject line and tab to the edit field,  it indicates a dash     

Second, In the settings menu under the utilities option,  there isn’t anything about  enabling the  voice assistant.

Thanks in advance

for any and all help advice and suggestions,       

Al 


moderated Two questions regarding Jaws 2021.

Albert Cutolo
 

Good afternoon everyone, 

First, how would I go about doing a repair of Jaws 2021,  and can you remove a specific  update.  ,  I’m asking because whenever my computer boots up, I keep getting a lot of lost focus messages. Next, after I type whatever the subject line and tab to the edit field,  it indicates a dash     

Second, In the settings menu under the utilities option,  there isn’t anything about  enabling the  voice assistant.

Thanks in advance

for any and all help advice and suggestions,       

Al 


moderated Re: cisco packet tracer

Sean Murphy
 

You require version seven and higher check this with the accessibility@... group

My experience is the part 

On 5 Feb 2021, at 10:36 am, Paul Faucheux <pf112781@...> wrote:


hi group this is paul. i have a question. is cisco packet tracer accessible with either fusion or jaws. i am taking classes at northshore technical community college. i am specifically wanting to know if there are any scripts for this program. i am taking the ccna certified cisco networking associate courses offered through www.netacad.com and they require the use of this software for labs. i have found that inetsim is usable but requires linux wich i dont have. i am running windows 10 with  jaws 2020 and in the process of upgrading to jaws 2021.


moderated Re: Reading Googledocs with JAWS ... also!

Ann Byrne
 

Check out this website. TCSAccess has good tutorials here.
https://www.youtube.com/channel/UCgRZjCwHaGwnNGGosxuxOEA

Dear Anne:

The advice and the help you have been giving me have been very helpful. I have done all the things you said, and I have even made sure to save the spreadsheet to my Google drive, but it still isn't working, even if I have the virtual cursor turned on. It is hard reading this document line by line. Can I copy it all and then save it in another format, such as Microsoft Word?



Rick Miller

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, February 04, 2021 6:46 AM
To: main@jfw.groups.io
Subject: Re: Reading Googledocs with JAWS ... also!

Be sure to turn off the virtual cursor with
insert-z. if that doesn't help, turn it back on
again. sometimes it makes a difference and sometimes it doesn't.

There is a whole list of Google docs shortcuts.

this is copied from a tcsaccess.com webinar transcript:
turn on accessibility

* Navigate to Tools menu with Alt + T

* Press Up or Down Arrow to navigate to Accessibility Settings

* Press Tab to Screen Reader Support

* Press Space to check the box

* Press Tab to the OK button

* Press Space to confirm the OK button


>> List with two items. Turn on screen reader support check box
not checked.

>> Ben: In this case I would want the screen
reader support turned on. So I'm pressing the
space bar. And as I continue to tab

>> Learn more about the list with two
items. Turn on Braille support. Check box.

>> Ben: Turn on supportive you're using a
Braille display. Just kind of a heads up, even
though you might get access to certain keystrokes
such as say line or being able to announce the
current font attributes, you might lose some
access to other keystrokes such as being able to
quickly identify a graphic and potentially select
that graphic regardless of which screen reader
you're using. The just kind of a heads up of the
trade off as you tooling to turn on Braille support on and off.



At 08:15 AM 2/4/2021, you wrote:
After you turn on Accessability, how do you go
about accessing Accessability Settings?



Rick Miller

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, February 04, 2021 5:53 AM
To: main@jfw.groups.io
Subject: Re: Reading Googledocs with JAWS

Be sure you have pressed alt-ctrl-z to turn on accessibility. In
accessibility settings, turn on Braille even if you don't have a
Braille display. At 10:22 PM 2/3/2021, you wrote:
Dear Listers:

I am trying to read a document from my church that was sent in
Googledocs, but I am finding that when I read it I can only do so
line-by-line, meaning I have to press the Down Arrow key after every
line. The JAWS Say All command will not work. Is there a way using
JAWS that I can read something in Googledocs straight through, as if
I were using the Say All command in other documents?



Rick Miller
















moderated Re: Reading Googledocs with JAWS ... also!

Ann Byrne
 

You can actually upload it to word using Google. somewhere there is an upload button that will do this beautifully.

At 05:56 PM 2/4/2021, you wrote:
Dear Anne:

The advice and the help you have been giving me have been very helpful. I have done all the things you said, and I have even made sure to save the spreadsheet to my Google drive, but it still isn't working, even if I have the virtual cursor turned on. It is hard reading this document line by line. Can I copy it all and then save it in another format, such as Microsoft Word?



Rick Miller

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, February 04, 2021 6:46 AM
To: main@jfw.groups.io
Subject: Re: Reading Googledocs with JAWS ... also!

Be sure to turn off the virtual cursor with
insert-z. if that doesn't help, turn it back on
again. sometimes it makes a difference and sometimes it doesn't.

There is a whole list of Google docs shortcuts.

this is copied from a tcsaccess.com webinar transcript:
turn on accessibility

* Navigate to Tools menu with Alt + T

* Press Up or Down Arrow to navigate to Accessibility Settings

* Press Tab to Screen Reader Support

* Press Space to check the box

* Press Tab to the OK button

* Press Space to confirm the OK button


>> List with two items. Turn on screen reader support check box
not checked.

>> Ben: In this case I would want the screen
reader support turned on. So I'm pressing the
space bar. And as I continue to tab

>> Learn more about the list with two
items. Turn on Braille support. Check box.

>> Ben: Turn on supportive you're using a
Braille display. Just kind of a heads up, even
though you might get access to certain keystrokes
such as say line or being able to announce the
current font attributes, you might lose some
access to other keystrokes such as being able to
quickly identify a graphic and potentially select
that graphic regardless of which screen reader
you're using. The just kind of a heads up of the
trade off as you tooling to turn on Braille support on and off.



At 08:15 AM 2/4/2021, you wrote:
After you turn on Accessability, how do you go
about accessing Accessability Settings?



Rick Miller

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, February 04, 2021 5:53 AM
To: main@jfw.groups.io
Subject: Re: Reading Googledocs with JAWS

Be sure you have pressed alt-ctrl-z to turn on accessibility. In
accessibility settings, turn on Braille even if you don't have a
Braille display. At 10:22 PM 2/3/2021, you wrote:
Dear Listers:

I am trying to read a document from my church that was sent in
Googledocs, but I am finding that when I read it I can only do so
line-by-line, meaning I have to press the Down Arrow key after every
line. The JAWS Say All command will not work. Is there a way using
JAWS that I can read something in Googledocs straight through, as if
I were using the Say All command in other documents?



Rick Miller
















moderated Re: Brave Browser shortcut?

 

On Thu, Feb 4, 2021 at 07:10 PM, Mike B wrote:
Try using, Alt + left arrow,
-
This one works.  Backspace doesn't (even though it does for some other browsers).
 
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

One does not discover new lands without consenting to lose sight of the shore for a very long time.

           ~ André Gide


moderated Re: Brave Browser shortcut?

Mike B.
 


Hi Tom,
 
Try using, Alt + left arrow, or pressing the, Backspace key.

Stay safe and take care.  Mike.

----- Original Message -----
Sent: Thursday, February 04, 2021 3:03 PM
Subject: Brave Browser shortcut?

Does anyone know the Brave browser shortcut for going back to the previous page? The list of shortcuts I have for Brave says it is control, left bracket but that doesn’t work.  Tom


moderated Re: cisco packet tracer

Rick Mladek
 

If you are able to use Linux, it is free ware, download your redhat most recent version.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Paul Faucheux
Sent: Thursday, February 4, 2021 6:35 PM
To: main@jfw.groups.io
Subject: cisco packet tracer

 

hi group this is paul. i have a question. is cisco packet tracer accessible with either fusion or jaws. i am taking classes at northshore technical community college. i am specifically wanting to know if there are any scripts for this program. i am taking the ccna certified cisco networking associate courses offered through www.netacad.com and they require the use of this software for labs. i have found that inetsim is usable but requires linux wich i dont have. i am running windows 10 with  jaws 2020 and in the process of upgrading to jaws 2021.


moderated Re: Reading Googledocs with JAWS ... also!

Rick Miller
 

Dear Anne:

The advice and the help you have been giving me have been very helpful. I have done all the things you said, and I have even made sure to save the spreadsheet to my Google drive, but it still isn't working, even if I have the virtual cursor turned on. It is hard reading this document line by line. Can I copy it all and then save it in another format, such as Microsoft Word?



Rick Miller

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, February 04, 2021 6:46 AM
To: main@jfw.groups.io
Subject: Re: Reading Googledocs with JAWS ... also!

Be sure to turn off the virtual cursor with
insert-z. if that doesn't help, turn it back on
again. sometimes it makes a difference and sometimes it doesn't.

There is a whole list of Google docs shortcuts.

this is copied from a tcsaccess.com webinar transcript:
turn on accessibility

* Navigate to Tools menu with Alt + T

* Press Up or Down Arrow to navigate to Accessibility Settings

* Press Tab to Screen Reader Support

* Press Space to check the box

* Press Tab to the OK button

* Press Space to confirm the OK button


>> List with two items. Turn on screen reader support check box not checked.

>> Ben: In this case I would want the screen
reader support turned on. So I'm pressing the
space bar. And as I continue to tab

>> Learn more about the list with two
items. Turn on Braille support. Check box.

>> Ben: Turn on supportive you're using a
Braille display. Just kind of a heads up, even
though you might get access to certain keystrokes
such as say line or being able to announce the
current font attributes, you might lose some
access to other keystrokes such as being able to
quickly identify a graphic and potentially select
that graphic regardless of which screen reader
you're using. The just kind of a heads up of the
trade off as you tooling to turn on Braille support on and off.



At 08:15 AM 2/4/2021, you wrote:
After you turn on Accessability, how do you go
about accessing Accessability Settings?



Rick Miller

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Ann Byrne
Sent: Thursday, February 04, 2021 5:53 AM
To: main@jfw.groups.io
Subject: Re: Reading Googledocs with JAWS

Be sure you have pressed alt-ctrl-z to turn on accessibility. In
accessibility settings, turn on Braille even if you don't have a
Braille display. At 10:22 PM 2/3/2021, you wrote:
Dear Listers:

I am trying to read a document from my church that was sent in
Googledocs, but I am finding that when I read it I can only do so
line-by-line, meaning I have to press the Down Arrow key after every
line. The JAWS Say All command will not work. Is there a way using
JAWS that I can read something in Googledocs straight through, as if
I were using the Say All command in other documents?



Rick Miller









moderated cisco packet tracer

Paul Faucheux
 

hi group this is paul. i have a question. is cisco packet tracer accessible with either fusion or jaws. i am taking classes at northshore technical community college. i am specifically wanting to know if there are any scripts for this program. i am taking the ccna certified cisco networking associate courses offered through www.netacad.com and they require the use of this software for labs. i have found that inetsim is usable but requires linux wich i dont have. i am running windows 10 with  jaws 2020 and in the process of upgrading to jaws 2021.


moderated Brave Browser shortcut?

T. Civitello
 

Does anyone know the Brave browser shortcut for going back to the previous page? The list of shortcuts I have for Brave says it is control, left bracket but that doesn’t work.  Tom


moderated Re: Jaws2020 monitor message

O.Addison Gethers
 

Randy  if it happen again I will try that and thanks.

Addison

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Randy Barnett
Sent: Thursday, February 04, 2021 1:13 PM
To: main@jfw.groups.io
Subject: Re: Jaws2020 monitor message

 

if you press the control key the windows key and enter another screen reader will come up. This one is built in the windows it is called narrator. If narrator works then you can see what's going on with your computer and jaws.

Randy Barnett


On Feb 4, 2021, at 8:21 AM, O.Addison Gethers <o.addisongethers@...> wrote:



Randy  My sister and brother said it not doing updated the computer  if it was doing updated  they would see the percentage of download  updated  !! I do have windows10  my brother check the monitor cord into computer tower  he said there is something in there on the monitor scredn but he can’t fis it to get jaws to come on when he activate it. I had the computer on yesterday morning around 7:30 a.m. my sister look at the monitor around 8:30 a.m.  say few second it say no detected signal ,then my brother came to look at the monitor around 12:noon  that when he checks the cord from monitor to computer tower  say something is there on monitor  and try to activate jaws and it won’t come on then I check again around 3:00 p.m. jaws didn’t come on either and I press windows r to type in jaws2020  it won’t come on

Is there something called narrow Jaws ? When I was reading one email Tuesday evening around 7:30 p.m. jaws was reading email message while read it cut off!!

Addison

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Randy Barnett
Sent: Thursday, February 04, 2021 12:05 AM
To: main@jfw.groups.io
Subject: Re: Jaws2020 monitor message

 

do you have windows 10? if so press control windows plus enter to start narrator. if you can navigate windows and everything works correctly then it's a jaws issue. if narrator starts but if windows is not working correctly at least then you can use the narrator to help troubleshoot the problem if narrator doesn't work and nothing else happens you're going to need sided assistance or do a complete reinstall using narrator with windows 10.

Randy Barnett


On Feb 3, 2021, at 5:13 PM, O.Addison Gethers <o.addisongethers@...> wrote:



Hi All  I have jaws2020  and desktop computer windows10 ,well last night (Tuesday) I was reading email then suddenly  jaws was reading message then it cut off then I said to myself  it’s sounds like the electricity power cut off and I feel computer tower is still on then I ask my sister did the power cut off she say no  then I press window + r to type in jaws2020  however jaws did not come back on !! So I went to press windows key + m to press alt +f4 arrow down once to restart press enter  the computer never restart  then I went back on desktop  press alt f4 to press enter on shut down computer  that didn’t shut down either so I had to press the power button on computer tower to turns off the computer . Well this morning the computer was on but jaws still not saying anything at all so I have try to reload jaws 2 time it won’t come on  then my sister came and try to see if she can see what’s going on the windows screen monitor  she told me the monitor is on then few second  it’s say no detected  signal  so she try to restart the computer  it won’t restart so she said that she will ask my brother to come over after his doctor appointment  so my brother said there is something on the windows screen  monitor  but he can’t fix it and say the monitor is not working . Then this evening around 5:30 p.m. I call Mr.James to ask him when he came by the house on yesterday  with laptop and I was showing him something on desktop computer did he see anything strange about the monitor  he said no  then I went back on desktop computer while he was still on the phone  suddenly jaws start talking  then Mr.James  said it probably  was jaws doing it when my brother and I have try to reload jaws it won’t come on !! Does anyone have any idea  what is the other way to try to narrow jaws back on ?

Addison


moderated Re: Jaws2020 monitor message

O.Addison Gethers
 

lol Glenn !! I just reply back to you to tell you I'm not Madison
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Thursday, February 04, 2021 11:30 AM
To: main@jfw.groups.io
Subject: Re: Jaws2020 monitor message

Sorry, I wrote Madison and meant to write O. Addison.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@gmail.com>
To: <main@jfw.groups.io>
Sent: Thursday, February 04, 2021 10:25 AM
Subject: Re: Jaws2020 monitor message


Mario My brother done everything to try to get jaws to come on
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Thursday, February 04, 2021 10:20 AM
To: main@jfw.groups.io
Subject: Re: Jaws2020 monitor message

to answer your question as another way to restart JAWS, you could press
control+alt+j if you have assigned a hotkey to the desktop shortcut.

also you can press insert+alt+f4 and wait to see if JAWS eventually
restarts. this takes a bit shorter than pressing alt+f4 and then
control+alt+j.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@gmail.com]
To: <jfw@groups.io>
Date: Wednesday, February 3, 2021, 8:13 PM
Subject: Jaws2020 monitor message
Hi All I have jaws2020 and desktop computer windows10 ,well last night
(Tuesday) I was reading email then suddenly jaws was reading message
then it cut off then I said to myself it's sounds like the electricity
power cut off and I feel computer tower is still on then I ask my sister
did the power cut off she say no then I press window + r to type in
jaws2020 however jaws did not come back on !! So I went to press
windows key + m to press alt +f4 arrow down once to restart press enter
the computer never restart then I went back on desktop press alt f4 to
press enter on shut down computer that didn't shut down either so I had
to press the power button on computer tower to turns off the computer .
Well this morning the computer was on but jaws still not saying anything
at all so I have try to reload jaws 2 time it won't come on then my
sister came and try to see if she can see what's going on the windows
screen monitor she told me the monitor is on then few second it's say
no detected signal so she try to restart the computer it won't
restart so she said that she will ask my brother to come over after his
doctor appointment so my brother said there is something on the windows
screen monitor but he can't fix it and say the monitor is not working
. Then this evening around 5:30 p.m. I call Mr.James to ask him when he
came by the house on yesterday with laptop and I was showing him
something on desktop computer did he see anything strange about the
monitor he said no then I went back on desktop computer while he was
still on the phone suddenly jaws start talking then Mr.James said it
probably was jaws doing it when my brother and I have try to reload
jaws it won't come on !! Does anyone have any idea what is the other
way to try to narrow jaws back on ?

Addison


moderated Re: Jaws2020 monitor message

O.Addison Gethers
 

Hi Glenn My name is not Madison it is Addison My brother is the one who
put the momonitor and hooked it to the computer tower he unplugged
everything then plugged it back in like he say there is something in there
but he can't fix it and tried to activate jaws it won't come on so he say
the monitor is not working but after 5:15 p.m. almost 5:30 p.m. yesterday
jaws came back on !! I did check it at 3:00 p.m. jaws did not come on so I
have tried to activate jaws and it won't come on
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Thursday, February 04, 2021 11:29 AM
To: main@jfw.groups.io
Subject: Re: Jaws2020 monitor message

Madison,
Do you have an Internet connection that is working?
That is, have you tried unplugging and plugging your modem and router?
I'm assuming where you are eMailing from is not the computer in question.
And I wonder if that yearly subscription of Jaws needs a working Internet
connection to work.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@gmail.com>
To: <main@jfw.groups.io>
Sent: Thursday, February 04, 2021 10:25 AM
Subject: Re: Jaws2020 monitor message


Mario My brother done everything to try to get jaws to come on
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Thursday, February 04, 2021 10:20 AM
To: main@jfw.groups.io
Subject: Re: Jaws2020 monitor message

to answer your question as another way to restart JAWS, you could press
control+alt+j if you have assigned a hotkey to the desktop shortcut.

also you can press insert+alt+f4 and wait to see if JAWS eventually
restarts. this takes a bit shorter than pressing alt+f4 and then
control+alt+j.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@gmail.com]
To: <jfw@groups.io>
Date: Wednesday, February 3, 2021, 8:13 PM
Subject: Jaws2020 monitor message
Hi All I have jaws2020 and desktop computer windows10 ,well last night
(Tuesday) I was reading email then suddenly jaws was reading message
then it cut off then I said to myself it's sounds like the electricity
power cut off and I feel computer tower is still on then I ask my sister
did the power cut off she say no then I press window + r to type in
jaws2020 however jaws did not come back on !! So I went to press
windows key + m to press alt +f4 arrow down once to restart press enter
the computer never restart then I went back on desktop press alt f4 to
press enter on shut down computer that didn't shut down either so I had
to press the power button on computer tower to turns off the computer .
Well this morning the computer was on but jaws still not saying anything
at all so I have try to reload jaws 2 time it won't come on then my
sister came and try to see if she can see what's going on the windows
screen monitor she told me the monitor is on then few second it's say
no detected signal so she try to restart the computer it won't
restart so she said that she will ask my brother to come over after his
doctor appointment so my brother said there is something on the windows
screen monitor but he can't fix it and say the monitor is not working
. Then this evening around 5:30 p.m. I call Mr.James to ask him when he
came by the house on yesterday with laptop and I was showing him
something on desktop computer did he see anything strange about the
monitor he said no then I went back on desktop computer while he was
still on the phone suddenly jaws start talking then Mr.James said it
probably was jaws doing it when my brother and I have try to reload
jaws it won't come on !! Does anyone have any idea what is the other
way to try to narrow jaws back on ?

Addison


moderated Re: Activation Count Remaining

Marie
 

There is a difference from the activation count which pertains to the number of devices using Jaws which you find on the web site, and the number of updates you have which is what you find on the About option on the Jaws menu.
Marie
 

From: Hicks Steven (CORNWALL IT SERVICES) via groups.io
Sent: Thursday, February 4, 2021 1:07 PM
To: main@jfw.groups.io
Subject: Re: Activation Count Remaining
 

Thanks very much.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Edward Green
Sent: 04 February 2021 20:13
To: main@jfw.groups.io
Subject: Re: Activation Count Remaining

 

Hi Stephen,

 

 

Cheers,

 

Ed



On 4 Feb 2021, at 20:12, Hicks Steven (CORNWALL IT SERVICES) via groups.io <steven.hicks@...> wrote:

 

JAWS Activation Count  Can anyone remind me of the web site to check my remaining activation count please?

 



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail


 

 

 

This message originated from outside of NHSmail. Please do not click links or open attachments unless you recognise the sender and know the content is safe.

 



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail


moderated Re: Activation Count Remaining

Hicks Steven (CORNWALL IT SERVICES) <steven.hicks@...>
 

Ah ha, that is useful, thanks.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Richard Turner
Sent: 04 February 2021 20:14
To: main@jfw.groups.io
Subject: Re: Activation Count Remaining

 

You can also check by Opening the Jaws menu, select help, then about.

 

 

 

Richard

 

Ralph's Observation:  It is a mistake to allow any mechanical object<>to realize that you are in a hurry.

 

 

My web site, www.turner42.com

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Edward Green
Sent: Thursday, February 4, 2021 12:13 PM
To: main@jfw.groups.io
Subject: Re: Activation Count Remaining

 

Hi Stephen,

 

 

Cheers,

 

Ed

 

On 4 Feb 2021, at 20:12, Hicks Steven (CORNWALL IT SERVICES) via groups.io <steven.hicks@...> wrote:

 

JAWS Activation Count  Can anyone remind me of the web site to check my remaining activation count please?

 



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail

 

 

 

This message originated from outside of NHSmail. Please do not click links or open attachments unless you recognise the sender and know the content is safe.

 



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail


moderated Re: Activation Count Remaining

Mike B.
 

Here you go:
From: Farfar Carlson
I posted a question to FS about how to determine the number of activation
keys remaining. In case any of you wanted to find out, here are their
instructions, verbatim:
 
Thank you for contacting Freedom Scientific Support.
 
We suggest going to FSACTIVATE.com
 
http://www.fsactivate.com
2. Click on the continue product activation button.
3. Down arrow to: Verify the number of activation keys available for
your Freedom Scientific product and press enter.
4. Down arrow to serial number and again down arrow to edit.
Type in your JAWS serial number and press enter on the submit button.
5. Underneath the first seven digits of the authorization number, you
will find the number of keys remaining.
 
 If you have any additional questions, please don't hesitate to contact
us.
Dave
 
 Original Message -----
From:
Farfar Carlson
Installing JAWS and Not Burn a Key
 
This is relevant to Windows XP, so your folder names may be different. Also
 
this is only a suggested process and the author will not assume any liability if
 
it does not work as advertised on your system. But others have used it with
 
success.
 
PREPARATION
Before you make any changes to your system you must preserve two folders on
 
another drive or partition so you can copy them later. Do this now while
 
you're thinking about it. Doing this after you've made changes is useless.
 
1.  Open C:\Program Files\Freedom Scientific
2. Copy the folder called 'activator'
3. Paste this folder to some other drive on your computer or an external
 
backup drive to keep it safe.
4. Do the same for the folder  'authorization'.
5. Now you will have these two folders preserved for when you need them
 
later. Don't lose them or forget where you put them.
6. If you have some sort of archiving software or a synchronization software,
 
set it up so that these two folders are automatically backed up. Then you don't
 
even need to think about them.
 
UPDATING JAWS
If you update your version of JAWS it is recommended you recopy these two
 
folders after the install is complete. Again if you use an automatic backup
 
process you don't need to worry about this step.
 
USING THESE FOLDERS
Follow these steps if you are ever confronted with the message to re-authorize
 
your installation of JAWS. This can occur if you change some hardware, or
 
add a drive or RAM.
1. Be sure to be running the newest version of JAWS when you restart your
 
computer. If you don't, the activation may not cover all versions you have
 
installed. So if you have version 9, 11, and 12 installed, be sure to boot using
 
JAWS 12.
2. If or when the activation dialog comes up, cancel out of the dialog.
3. Copy the two folders 'activator'  and 'authorization' from your backup drive.
4. Paste both to the C:\Program Files\Freedom Scientific folder.
5. Allow all files to be overwritten.
6. Reboot your computer.
 
CAVEATS
This should work as long as you do so on the same machine (computer). It is
 
not known to work if you try to paste these two folders onto the C: drive of a
 
different computer. That would obviously violate the whole purpose of the
 
keys -- to prevent JAWS from being installed on too many computers.
 
Dave
 

Stay safe and take care.  Mike.

----- Original Message -----
Sent: Thursday, February 04, 2021 12:12 PM
Subject: Activation Count Remaining

JAWS Activation Count  Can anyone remind me of the web site to check my remaining activation count please?

 



********************************************************************************************************************

This message may contain confidential information. If you are not the intended recipient please inform the
sender that you have received the message in error before deleting it.
Please do not disclose, copy or distribute information in this e-mail or take any action in relation to its contents. To do so is strictly prohibited and may be unlawful. Thank you for your co-operation.

NHSmail is the secure email and directory service available for all NHS staff in England and Scotland. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services.

For more information and to find out how you can switch, https://portal.nhs.net/help/joiningnhsmail

4701 - 4720 of 90900