Date   

moderated Re: fs Cast and Q-cast.

david Jennette
 

It’s probably because it’s not well known to smart screen so it’s going to be blocked.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of james hooper
Sent: Thursday, June 25, 2020 6:49 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

Tried to download it said it was blocked cause it might harm my system.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of david Jennette
Sent: Thursday, June 25, 2020 4:39 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

Yes, it is. Here’s the site that it’s on.

 

www.nathantech.net

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Thursday, June 25, 2020 5:25 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

I have never heard of Lunar RSS - is it Screenreader accessible?

I might check it out myself if it is.

David Griffith

 

On 25 Jun 2020, at 22:08, david Jennette <dcjenn@...> wrote:

 

Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Thursday, June 25, 2020 3:58 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search.

You would certainly find no difficulty locating FSCast from a number of sources in the program.  There is an optional `

`  additional app called VI Podcast which you can download from within the app This supports    the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps  use different databases for accessing Podcasts.

FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app.

You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and  I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful.  However in the audio demonstration  I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected.

David Griffith

  -on  

 

On 25 Jun 2020, at 21:35, Jessica D <jldail13@...> wrote:

 

Hi,

Honostly, I think you should look for another podcast player.

I don’t think QCast is being developed anymore.

 

Thanks,

 

Jessica

 

 

Sent from Mail for Windows 10

 

From: david Jennette
Sent: Thursday, June 25, 2020 4:21 PM
To: jfw@groups.io
Subject: fs Cast and Q-cast.

 

Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.

 

 

 


moderated Re: fs Cast and Q-cast.

james hooper
 

Tried to download it said it was blocked cause it might harm my system.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of david Jennette
Sent: Thursday, June 25, 2020 4:39 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

Yes, it is. Here’s the site that it’s on.

 

www.nathantech.net

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Thursday, June 25, 2020 5:25 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

I have never heard of Lunar RSS - is it Screenreader accessible?

I might check it out myself if it is.

David Griffith

 

On 25 Jun 2020, at 22:08, david Jennette <dcjenn@...> wrote:

 

Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Thursday, June 25, 2020 3:58 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search.

You would certainly find no difficulty locating FSCast from a number of sources in the program.  There is an optional `

`  additional app called VI Podcast which you can download from within the app This supports    the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps  use different databases for accessing Podcasts.

FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app.

You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and  I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful.  However in the audio demonstration  I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected.

David Griffith

  -on  



On 25 Jun 2020, at 21:35, Jessica D <jldail13@...> wrote:

 

Hi,

Honostly, I think you should look for another podcast player.

I don’t think QCast is being developed anymore.

 

Thanks,

 

Jessica

 

 

Sent from Mail for Windows 10

 

From: david Jennette
Sent: Thursday, June 25, 2020 4:21 PM
To: jfw@groups.io
Subject: fs Cast and Q-cast.

 

Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.

 

 

 


moderated modify spoken symbols #jaws

romance's prince
 

hello dears

when i tried to modify some spoken symbols on *.sbl
i didn't know how i convert hex to get 8 binary number, and jaws didn't accept modification without this 8 numbers.

i'm using notepad plus plus

another point, i noticed that Latin  alphapits not found in this file, why?

 any help will be appreciated.
  thanks very much


moderated Re: fs Cast and Q-cast.

Larry Gassman
 

I’ve been looking for a good accessible Podcatcher.

Brian Hartgen now has one with Leasey.

I’ll also check out these two for FSCast and much much more.

 

Larry

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of david Jennette
Sent: Thursday, June 25, 2020 3:39 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

Yes, it is. Here’s the site that it’s on.

 

www.nathantech.net

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Thursday, June 25, 2020 5:25 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

I have never heard of Lunar RSS - is it Screenreader accessible?

I might check it out myself if it is.

David Griffith

 

On 25 Jun 2020, at 22:08, david Jennette <dcjenn@...> wrote:

 

Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Thursday, June 25, 2020 3:58 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search.

You would certainly find no difficulty locating FSCast from a number of sources in the program.  There is an optional `

`  additional app called VI Podcast which you can download from within the app This supports    the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps  use different databases for accessing Podcasts.

FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app.

You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and  I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful.  However in the audio demonstration  I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected.

David Griffith

  -on  



On 25 Jun 2020, at 21:35, Jessica D <jldail13@...> wrote:

 

Hi,

Honostly, I think you should look for another podcast player.

I don’t think QCast is being developed anymore.

 

Thanks,

 

Jessica

 

 

Sent from Mail for Windows 10

 

From: david Jennette
Sent: Thursday, June 25, 2020 4:21 PM
To: jfw@groups.io
Subject: fs Cast and Q-cast.

 

Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.

 

 

 


moderated Re: fs Cast and Q-cast.

david Jennette
 

Yes, it is. Here’s the site that it’s on.

 

www.nathantech.net

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Thursday, June 25, 2020 5:25 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

I have never heard of Lunar RSS - is it Screenreader accessible?

I might check it out myself if it is.

David Griffith



On 25 Jun 2020, at 22:08, david Jennette <dcjenn@...> wrote:

 

Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Thursday, June 25, 2020 3:58 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search.

You would certainly find no difficulty locating FSCast from a number of sources in the program.  There is an optional `

`  additional app called VI Podcast which you can download from within the app This supports    the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps  use different databases for accessing Podcasts.

FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app.

You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and  I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful.  However in the audio demonstration  I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected.

David Griffith

  -on  




On 25 Jun 2020, at 21:35, Jessica D <jldail13@...> wrote:

 

Hi,

Honostly, I think you should look for another podcast player.

I don’t think QCast is being developed anymore.

 

Thanks,

 

Jessica

 

 

Sent from Mail for Windows 10

 

From: david Jennette
Sent: Thursday, June 25, 2020 4:21 PM
To: jfw@groups.io
Subject: fs Cast and Q-cast.

 

Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.

 

 

 


moderated Re: fs Cast and Q-cast.

David Griffith
 

I have never heard of Lunar RSS - is it Screenreader accessible?
I might check it out myself if it is.
David Griffith

On 25 Jun 2020, at 22:08, david Jennette <dcjenn@...> wrote:

Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also.
 
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Thursday, June 25, 2020 3:58 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.
 
This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search.
You would certainly find no difficulty locating FSCast from a number of sources in the program.  There is an optional `
`  additional app called VI Podcast which you can download from within the app This supports    the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps  use different databases for accessing Podcasts.
FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app.
You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and  I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful.  However in the audio demonstration  I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected.
David Griffith
  -on  


On 25 Jun 2020, at 21:35, Jessica D <jldail13@...> wrote:
 
Hi,
Honostly, I think you should look for another podcast player.
I don’t think QCast is being developed anymore.
 
Thanks,
 
Jessica
 
 
Sent from Mail for Windows 10
 
From: david Jennette
Sent: Thursday, June 25, 2020 4:21 PM
To: jfw@groups.io
Subject: fs Cast and Q-cast.
 
Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.
 
 



moderated Re: Teamviewer

Milton Ota
 

Yep, I don’t use it much other than for solving Captcha and getting help with programs that are not keyboard friendly with JAWS.

 

Take cfare, keep safe.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 5:04 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

OK, pretty much the same here.

If I am lucky, I won’t need Teamviewer again for a long time.

Thanks,

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 2:58 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Hi Richard,

 

I’m using JAWS Version Home Use Edition

Version 2020.2006.12 on a Dell computer with an i7 processor and the Windows May update.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 4:34 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I am using Jaws Home 2020, on a Del laptop running Windows 10 Home 64bit 2004 version.

I get nothing from the help button.

However, if I put Jaws into speak on command and launch narrator, I can read the version number.

 

Are you using either Jaws Pro, or Windows Pro?

I’m trying to sort out the difference.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 2:20 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Here are the steps I used to get the version number:

 

Open Team viewer, use control – Home to take the cursor to the top.

 

Tab to the Help Button, Press the spacebar to get the Context Menu.

 

Arrow up once and press Enter on About.

 

Using the JAWS Key – V when the program is opened did not seem to work.

 

HTH.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 4:02 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Milton,

How did you get the version number?

I tried with Jaws and got a big nothing.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

On Jun 25, 2020, at 1:37 PM, Milton Ota <mota1252@...> wrote:



The latest version of Team Viewer is:

 

Version:15.7.6 Date: Jun 22 2020

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Ingram
Sent: Thursday, June 25, 2020 3:18 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of TeamViewer are you using?  I think the current version is 15x!  I just want to be sure that this version is correct.  As far as I know I don't think that there are any jaws scripts for this version.

-----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer

Thanks, I’m sure this will help if I need to use it again.  I am using the free version.

 

The combination of Skype and Teamviewer allowed him to direct me to what I needed to do.

But, Teamviewer could use some help and/or Jaws scripts.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 8:42 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Hi Richard,

 

When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field.

 

Tab to: “Password: and provide the password that is generated.

 

This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license.

 

Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect.

 

I hope this is helpful information.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 10:21 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.

 

But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, June 25, 2020 7:58 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 24, 2020 9:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, June 24, 2020 10:40 AM
To: main@jfw.groups.io
Subject: Teamviewer

 

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.

 

Any help would be appreciated.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Teamviewer

Richard Turner
 

OK, pretty much the same here.

If I am lucky, I won’t need Teamviewer again for a long time.

Thanks,

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 2:58 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Hi Richard,

 

I’m using JAWS Version Home Use Edition

Version 2020.2006.12 on a Dell computer with an i7 processor and the Windows May update.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 4:34 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I am using Jaws Home 2020, on a Del laptop running Windows 10 Home 64bit 2004 version.

I get nothing from the help button.

However, if I put Jaws into speak on command and launch narrator, I can read the version number.

 

Are you using either Jaws Pro, or Windows Pro?

I’m trying to sort out the difference.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 2:20 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Here are the steps I used to get the version number:

 

Open Team viewer, use control – Home to take the cursor to the top.

 

Tab to the Help Button, Press the spacebar to get the Context Menu.

 

Arrow up once and press Enter on About.

 

Using the JAWS Key – V when the program is opened did not seem to work.

 

HTH.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 4:02 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Milton,

How did you get the version number?

I tried with Jaws and got a big nothing.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

On Jun 25, 2020, at 1:37 PM, Milton Ota <mota1252@...> wrote:



The latest version of Team Viewer is:

 

Version:15.7.6 Date: Jun 22 2020

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Ingram
Sent: Thursday, June 25, 2020 3:18 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of TeamViewer are you using?  I think the current version is 15x!  I just want to be sure that this version is correct.  As far as I know I don't think that there are any jaws scripts for this version.

-----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer

Thanks, I’m sure this will help if I need to use it again.  I am using the free version.

 

The combination of Skype and Teamviewer allowed him to direct me to what I needed to do.

But, Teamviewer could use some help and/or Jaws scripts.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 8:42 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Hi Richard,

 

When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field.

 

Tab to: “Password: and provide the password that is generated.

 

This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license.

 

Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect.

 

I hope this is helpful information.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 10:21 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.

 

But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, June 25, 2020 7:58 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 24, 2020 9:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, June 24, 2020 10:40 AM
To: main@jfw.groups.io
Subject: Teamviewer

 

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.

 

Any help would be appreciated.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Teamviewer

Milton Ota
 

Hi Richard,

 

I’m using JAWS Version Home Use Edition

Version 2020.2006.12 on a Dell computer with an i7 processor and the Windows May update.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 4:34 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I am using Jaws Home 2020, on a Del laptop running Windows 10 Home 64bit 2004 version.

I get nothing from the help button.

However, if I put Jaws into speak on command and launch narrator, I can read the version number.

 

Are you using either Jaws Pro, or Windows Pro?

I’m trying to sort out the difference.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 2:20 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Here are the steps I used to get the version number:

 

Open Team viewer, use control – Home to take the cursor to the top.

 

Tab to the Help Button, Press the spacebar to get the Context Menu.

 

Arrow up once and press Enter on About.

 

Using the JAWS Key – V when the program is opened did not seem to work.

 

HTH.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 4:02 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Milton,

How did you get the version number?

I tried with Jaws and got a big nothing.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

On Jun 25, 2020, at 1:37 PM, Milton Ota <mota1252@...> wrote:



The latest version of Team Viewer is:

 

Version:15.7.6 Date: Jun 22 2020

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Ingram
Sent: Thursday, June 25, 2020 3:18 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of TeamViewer are you using?  I think the current version is 15x!  I just want to be sure that this version is correct.  As far as I know I don't think that there are any jaws scripts for this version.

-----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer

Thanks, I’m sure this will help if I need to use it again.  I am using the free version.

 

The combination of Skype and Teamviewer allowed him to direct me to what I needed to do.

But, Teamviewer could use some help and/or Jaws scripts.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 8:42 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Hi Richard,

 

When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field.

 

Tab to: “Password: and provide the password that is generated.

 

This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license.

 

Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect.

 

I hope this is helpful information.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 10:21 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.

 

But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, June 25, 2020 7:58 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 24, 2020 9:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, June 24, 2020 10:40 AM
To: main@jfw.groups.io
Subject: Teamviewer

 

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.

 

Any help would be appreciated.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Teamviewer

Richard Turner
 

I am using Jaws Home 2020, on a Del laptop running Windows 10 Home 64bit 2004 version.

I get nothing from the help button.

However, if I put Jaws into speak on command and launch narrator, I can read the version number.

 

Are you using either Jaws Pro, or Windows Pro?

I’m trying to sort out the difference.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 2:20 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Here are the steps I used to get the version number:

 

Open Team viewer, use control – Home to take the cursor to the top.

 

Tab to the Help Button, Press the spacebar to get the Context Menu.

 

Arrow up once and press Enter on About.

 

Using the JAWS Key – V when the program is opened did not seem to work.

 

HTH.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 4:02 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Milton,

How did you get the version number?

I tried with Jaws and got a big nothing.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

On Jun 25, 2020, at 1:37 PM, Milton Ota <mota1252@...> wrote:



The latest version of Team Viewer is:

 

Version:15.7.6 Date: Jun 22 2020

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Ingram
Sent: Thursday, June 25, 2020 3:18 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of TeamViewer are you using?  I think the current version is 15x!  I just want to be sure that this version is correct.  As far as I know I don't think that there are any jaws scripts for this version.

-----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer


Thanks, I’m sure this will help if I need to use it again.  I am using the free version.

 

The combination of Skype and Teamviewer allowed him to direct me to what I needed to do.

But, Teamviewer could use some help and/or Jaws scripts.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 8:42 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Hi Richard,

 

When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field.

 

Tab to: “Password: and provide the password that is generated.

 

This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license.

 

Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect.

 

I hope this is helpful information.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 10:21 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.

 

But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, June 25, 2020 7:58 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 24, 2020 9:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, June 24, 2020 10:40 AM
To: main@jfw.groups.io
Subject: Teamviewer

 

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.

 

Any help would be appreciated.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: Teamviewer

Milton Ota
 

Here are the steps I used to get the version number:

 

Open Team viewer, use control – Home to take the cursor to the top.

 

Tab to the Help Button, Press the spacebar to get the Context Menu.

 

Arrow up once and press Enter on About.

 

Using the JAWS Key – V when the program is opened did not seem to work.

 

HTH.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 4:02 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Milton,

How did you get the version number?

I tried with Jaws and got a big nothing.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert



On Jun 25, 2020, at 1:37 PM, Milton Ota <mota1252@...> wrote:



The latest version of Team Viewer is:

 

Version:15.7.6 Date: Jun 22 2020

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Ingram
Sent: Thursday, June 25, 2020 3:18 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of TeamViewer are you using?  I think the current version is 15x!  I just want to be sure that this version is correct.  As far as I know I don't think that there are any jaws scripts for this version.

-----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer



Thanks, I’m sure this will help if I need to use it again.  I am using the free version.

 

The combination of Skype and Teamviewer allowed him to direct me to what I needed to do.

But, Teamviewer could use some help and/or Jaws scripts.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 8:42 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Hi Richard,

 

When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field.

 

Tab to: “Password: and provide the password that is generated.

 

This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license.

 

Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect.

 

I hope this is helpful information.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 10:21 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.

 

But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, June 25, 2020 7:58 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 24, 2020 9:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, June 24, 2020 10:40 AM
To: main@jfw.groups.io
Subject: Teamviewer

 

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.

 

Any help would be appreciated.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: fs Cast and Q-cast.

david Jennette
 

Thanks. I’ll have to check those out. I’ve just now installed Luna Rss and that works with Fs Cast also.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Griffith
Sent: Thursday, June 25, 2020 3:58 PM
To: main@jfw.groups.io
Subject: Re: fs Cast and Q-cast.

 

This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search.

You would certainly find no difficulty locating FSCast from a number of sources in the program.  There is an optional `

`  additional app called VI Podcast which you can download from within the app This supports    the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps  use different databases for accessing Podcasts.

FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app.

You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and  I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful.  However in the audio demonstration  I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected.

David Griffith

  -on  



On 25 Jun 2020, at 21:35, Jessica D <jldail13@...> wrote:

 

Hi,

Honostly, I think you should look for another podcast player.

I don’t think QCast is being developed anymore.

 

Thanks,

 

Jessica

 

 

Sent from Mail for Windows 10

 

From: david Jennette
Sent: Thursday, June 25, 2020 4:21 PM
To: jfw@groups.io
Subject: fs Cast and Q-cast.

 

Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.

 

 


moderated Re: Teamviewer

Richard Turner
 

Milton,
How did you get the version number?
I tried with Jaws and got a big nothing.




Richard
"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

On Jun 25, 2020, at 1:37 PM, Milton Ota <mota1252@...> wrote:



The latest version of Team Viewer is:

 

Version:15.7.6 Date: Jun 22 2020

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Ingram
Sent: Thursday, June 25, 2020 3:18 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of TeamViewer are you using?  I think the current version is 15x!  I just want to be sure that this version is correct.  As far as I know I don't think that there are any jaws scripts for this version.

-----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer


Thanks, I’m sure this will help if I need to use it again.  I am using the free version.

 

The combination of Skype and Teamviewer allowed him to direct me to what I needed to do.

But, Teamviewer could use some help and/or Jaws scripts.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 8:42 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Hi Richard,

 

When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field.

 

Tab to: “Password: and provide the password that is generated.

 

This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license.

 

Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect.

 

I hope this is helpful information.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 10:21 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.

 

But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, June 25, 2020 7:58 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 24, 2020 9:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, June 24, 2020 10:40 AM
To: main@jfw.groups.io
Subject: Teamviewer

 

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.

 

Any help would be appreciated.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: fs Cast and Q-cast.

David Griffith
 

This is correct I have stopped using Cast because of this. Speak On is a good free alternative which is till being maintained in terms of database search.
You would certainly find no difficulty locating FSCast from a number of sources in the program.  There is an optional `
`  additional app called VI Podcast which you can download from within the app . This supports    the main Podcast and TuneIn radio apps. These main Podcast and Tune In radio apps  use different databases for accessing Podcasts.
FSCast is a pre-selected podcast feed in the VI Podcast app though of course you could also find it in the Podcast app.
You will also in the VI Podcast app find my series of audio demonstrations on how to use Speak On and  I recommend yo listen to at least the episode on using Speak On and Podcasts as there is a learning curve although it is very powerful.  However in the audio demonstration  I say that \FSCast does not work in the VI Podcast app but this has actually since been corrected.
David Griffith
  -on  

On 25 Jun 2020, at 21:35, Jessica D <jldail13@...> wrote:

Hi,
Honostly, I think you should look for another podcast player.
I don’t think QCast is being developed anymore.
 
Thanks,
 
Jessica
 
 
Sent from Mail for Windows 10
 
From: david Jennette
Sent: Thursday, June 25, 2020 4:21 PM
To: jfw@groups.io
Subject: fs Cast and Q-cast.
 
Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.

 


moderated Re: TW blue sounds

Mich Verrier
 

Hi I can ancer what some of the sounds meen the tinkling sound you hear is a tweet coming in. I am not shure though what the sound is with tweets that have a link that you can’t click on though it is kind of a type ritting sound it is hard to describe. I hope this helps. From Mich.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: June 25, 2020 4:17 PM
To: Jaws user list <main@jfw.groups.io>
Subject: TW blue sounds

 

Hi,

 

I just started using TWBlue.

I’m wondering what all the sounds mean?

 

Also, how do TWBlue and open Tween compare?

 

Thanks,

 

Jessica

 

 

Sent from Mail for Windows 10

 


moderated Re: Teamviewer

Milton Ota
 

The latest version of Team Viewer is:

 

Version:15.7.6 Date: Jun 22 2020

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of David Ingram
Sent: Thursday, June 25, 2020 3:18 PM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of TeamViewer are you using?  I think the current version is 15x!  I just want to be sure that this version is correct.  As far as I know I don't think that there are any jaws scripts for this version.

-----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer


Thanks, I’m sure this will help if I need to use it again.  I am using the free version.

 

The combination of Skype and Teamviewer allowed him to direct me to what I needed to do.

But, Teamviewer could use some help and/or Jaws scripts.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 8:42 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Hi Richard,

 

When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field.

 

Tab to: “Password: and provide the password that is generated.

 

This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license.

 

Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect.

 

I hope this is helpful information.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 10:21 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.

 

But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, June 25, 2020 7:58 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 24, 2020 9:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, June 24, 2020 10:40 AM
To: main@jfw.groups.io
Subject: Teamviewer

 

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.

 

Any help would be appreciated.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated Re: fs Cast and Q-cast.

Jessica D
 

Hi,

Honostly, I think you should look for another podcast player.

I don’t think QCast is being developed anymore.

 

Thanks,

 

Jessica

 

 

Sent from Mail for Windows 10

 

From: david Jennette
Sent: Thursday, June 25, 2020 4:21 PM
To: jfw@groups.io
Subject: fs Cast and Q-cast.

 

Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.

 


moderated fs Cast and Q-cast.

david Jennette
 

Hello. I’m trying to add fs cast to Q-cast but when I do the search and select the result, the entry is no longer valid. Does anyone know of what url I need to enter to manually add the podcast or if there’s another result I need to search fore? Thanks.


moderated Re: Teamviewer

David Ingram
 

Which version of TeamViewer are you using?  I think the current version is 15x!  I just want to be sure that this version is correct.  As far as I know I don't think that there are any jaws scripts for this version.

-----Original Message-----
From: Richard Turner
Sent: Jun 25, 2020 12:47 PM
To: "main@jfw.groups.io"
Subject: Re: Teamviewer

Thanks, I’m sure this will help if I need to use it again.  I am using the free version.

 

The combination of Skype and Teamviewer allowed him to direct me to what I needed to do.

But, Teamviewer could use some help and/or Jaws scripts.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Milton Ota
Sent: Thursday, June 25, 2020 8:42 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Hi Richard,

 

When you first open Team viewer, you will need to tab down to a field that says: “Your ID:” and provide the person that will control your computer the digits in that field.

 

Tab to: “Password: and provide the password that is generated.

 

This only will work if you are using the Team Viewer as a free version. I’m not sure what happens if you purchased a license.

 

Once the person connecting to your computer has entered those pieces of information they should be connected and be able to take over. You should be on the phone if there is something specific that you are looking for help with if the person is not very familiar with your computer setup. You don’t have to unload JAWS and if you need to take control, the helper can let you take over and you don’t need to disconnect.

 

I hope this is helpful information.

 

Milton

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Thursday, June 25, 2020 10:21 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

I would like to know that as well.

Teamviewer is not very accessible at all, and the Jaws command to identify the version just says “version” with no information.

I couldn’t figure out how to give access to a technician to take control of my computer and could barely deal with the connection.

At least, between Teamviewer and Skype he was able to direct me to the braille driver that was getting in the way.

 

But I would say that whatever the current version of Teamviewer is, it isn’t very accessible.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Thursday, June 25, 2020 7:58 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Which version of Teamviewer are you using that is accessible, there seem to be many and I know even technical support people often ask to go to the Teamviewer website and ask you to download an older versio.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dan Longmore
Sent: Wednesday, June 24, 2020 9:02 AM
To: main@jfw.groups.io
Subject: Re: Teamviewer

 

Richard,

  Team Viewer and JAWS 2020 was accessible when used a few weeks ago.

 

Dan

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Wednesday, June 24, 2020 10:40 AM
To: main@jfw.groups.io
Subject: Teamviewer

 

I need to use Teamviewer to get help on a braille display from the company.

Are there scripts for the latest Teamviewer and Jaws 2020?

The Doug Lee scripts don’t think I have any compatible Jaws, but then again, those scripts are from 2015.

 

Any help would be appreciated.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 


moderated TW blue sounds

Jessica D
 

Hi,

 

I just started using TWBlue.

I’m wondering what all the sounds mean?

 

Also, how do TWBlue and open Tween compare?

 

Thanks,

 

Jessica

 

 

Sent from Mail for Windows 10