Larry:

Is this a global fix, or do you have to do it for each individual document?

Tom Behler

It is fixed.

Richard Turner’s advice eventually helped.

The problem is that when you deal with Buttons and Microsoft, there is no confirmation after you press enter on the button.

You have to go back in to the document to see if changes have taken effect.

Well, they finally did.

Thanks to all for your help.

Larry

Hi again, Larry. Also, there is another button in the View tab called side-by-side. Make sure this is not checked.

Hi,

Not sure if I’ve sent something to this list about this.

Something has changed.
I used to be able to arrow through a document and  read it from beginning to end.

Now I hear at the end of page 1 dialogue I’ve written, and it goes to page 3 and skips page 2 etc.

I think I’ve fixed this issue before but don’t think I kept that piece of information.

I do not hear this in Narrator at all.  I do hear it with all versions of JAWS on my PC.

Thoughts?

Larry

It is fixed.

Richard Turner’s advice eventually helped.

The problem is that when you deal with Buttons and Microsoft, there is no confirmation after you press enter on the button.

You have to go back in to the document to see if changes have taken effect.

Well, they finally did.

Thanks to all for your help.

Larry

Hi again, Larry. Also, there is another button in the View tab called side-by-side. Make sure this is not checked.

Hi,

Not sure if I’ve sent something to this list about this.

Something has changed.
I used to be able to arrow through a document and  read it from beginning to end.

Now I hear at the end of page 1 dialogue I’ve written, and it goes to page 3 and skips page 2 etc.

I think I’ve fixed this issue before but don’t think I kept that piece of information.

I do not hear this in Narrator at all.  I do hear it with all versions of JAWS on my PC.

Thoughts?

Larry

Hi again, Larry. Also, there is another button in the View tab called side-by-side. Make sure this is not checked.

Hi,

Not sure if I’ve sent something to this list about this.

Something has changed.
I used to be able to arrow through a document and  read it from beginning to end.

Now I hear at the end of page 1 dialogue I’ve written, and it goes to page 3 and skips page 2 etc.

I think I’ve fixed this issue before but don’t think I kept that piece of information.

I do not hear this in Narrator at all.  I do hear it with all versions of JAWS on my PC.

Thoughts?

Larry

Hi,

Not sure if I’ve sent something to this list about this.

Something has changed.
I used to be able to arrow through a document and  read it from beginning to end.

Now I hear at the end of page 1 dialogue I’ve written, and it goes to page 3 and skips page 2 etc.

I think I’ve fixed this issue before but don’t think I kept that piece of information.

I do not hear this in Narrator at all.  I do hear it with all versions of JAWS on my PC.

Thoughts?

Larry

Hi,

Not sure if I’ve sent something to this list about this.

Something has changed.
I used to be able to arrow through a document and  read it from beginning to end.

Now I hear at the end of page 1 dialogue I’ve written, and it goes to page 3 and skips page 2 etc.

I think I’ve fixed this issue before but don’t think I kept that piece of information.

I do not hear this in Narrator at all.  I do hear it with all versions of JAWS on my PC.

Thoughts?

Larry

Hi all, this is Michael and I'm sending this email just want to ask y'all on softwares that can convert Mp3 files to mp4. I'm trying to upload my podcast to Youtube but it won't allow me. Everytime when I attempt to upload a file with mp3 format, Youtube will say that the file format is invallad.  

I want to know is there a software that can convert mp3 file to mp4 or wave? 

Thank you and I'm hoping to hear from you soon. 

Best regards 

Michael Munn 

Member: Virginia Association of Blind Students National Federation of the Blind of Virginia 

www.nfbv.org

Student of: Hadley Institute of the Blind 

www.hadley.edu

I just noticed that too.

With my wife’s help, I discovered two things.

One, make sure on the view tab you are on print view.

Also on the view tab, tab a bunch and make sure it doesn’t say Multipage after the zoom info.  If it does, arrow down to one page and hit enter.

I have had to do that with a couple of documents in the last few days.

Quite annoying.

Hi,

Not sure if I’ve sent something to this list about this.

Something has changed.
I used to be able to arrow through a document and  read it from beginning to end.

Now I hear at the end of page 1 dialogue I’ve written, and it goes to page 3 and skips page 2 etc.

I think I’ve fixed this issue before but don’t think I kept that piece of information.

I do not hear this in Narrator at all.  I do hear it with all versions of JAWS on my PC.

Thoughts?

Larry

On Aug 16, 2020, at 3:00 PM, Richard Turner <richardturner42@...> wrote:



When you get to the point at which up or down arrow do not work, have you tried right or left arrow?

I got passed one of those spots doing that, but it is still wrong, that should not be happening.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Larry Gassman
Sent: Sunday, August 16, 2020 11:58 AM
To: main@jfw.groups.io
Subject: Re: Page Breaks in Microsoft Word

 

Richard,

I am using print tab, and my pages in the view tab were set to one page.

So unfortunately, the mystery continues.

Thanks.

Larry

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Richard Turner
Sent: Sunday, August 16, 2020 11:53 AM
To: main@jfw.groups.io
Subject: Re: Page Breaks in Microsoft Word

 

I just noticed that too.

With my wife’s help, I discovered two things.

One, make sure on the view tab you are on print view.

Also on the view tab, tab a bunch and make sure it doesn’t say Multipage after the zoom info.  If it does, arrow down to one page and hit enter.

I have had to do that with a couple of documents in the last few days.

Quite annoying.

 

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Larry Gassman
Sent: Sunday, August 16, 2020 11:50 AM
To: main@jfw.groups.io
Subject: Page Breaks in Microsoft Word

 

Hi,

Not sure if I’ve sent something to this list about this.

Something has changed.
I used to be able to arrow through a document and  read it from beginning to end.

Now I hear at the end of page 1 dialogue I’ve written, and it goes to page 3 and skips page 2 etc.

I think I’ve fixed this issue before but don’t think I kept that piece of information.

I do not hear this in Narrator at all.  I do hear it with all versions of JAWS on my PC.

Thoughts?

Larry

 

               

Richard,

I am using print tab, and my pages in the view tab were set to one page.

So unfortunately, the mystery continues.

Thanks.

Larry

I just noticed that too.

With my wife’s help, I discovered two things.

One, make sure on the view tab you are on print view.

Also on the view tab, tab a bunch and make sure it doesn’t say Multipage after the zoom info.  If it does, arrow down to one page and hit enter.

I have had to do that with a couple of documents in the last few days.

Quite annoying.

Hi,

Not sure if I’ve sent something to this list about this.

Something has changed.
I used to be able to arrow through a document and  read it from beginning to end.

Now I hear at the end of page 1 dialogue I’ve written, and it goes to page 3 and skips page 2 etc.

I think I’ve fixed this issue before but don’t think I kept that piece of information.

I do not hear this in Narrator at all.  I do hear it with all versions of JAWS on my PC.

Thoughts?

Larry

I just noticed that too.

With my wife’s help, I discovered two things.

One, make sure on the view tab you are on print view.

Also on the view tab, tab a bunch and make sure it doesn’t say Multipage after the zoom info.  If it does, arrow down to one page and hit enter.

I have had to do that with a couple of documents in the last few days.

Quite annoying.

Hi,

Not sure if I’ve sent something to this list about this.

Something has changed.
I used to be able to arrow through a document and  read it from beginning to end.

Now I hear at the end of page 1 dialogue I’ve written, and it goes to page 3 and skips page 2 etc.

I think I’ve fixed this issue before but don’t think I kept that piece of information.

I do not hear this in Narrator at all.  I do hear it with all versions of JAWS on my PC.

Thoughts?

Larry

Hi,

Not sure if I’ve sent something to this list about this.

Something has changed.
I used to be able to arrow through a document and  read it from beginning to end.

Now I hear at the end of page 1 dialogue I’ve written, and it goes to page 3 and skips page 2 etc.

I think I’ve fixed this issue before but don’t think I kept that piece of information.

I do not hear this in Narrator at all.  I do hear it with all versions of JAWS on my PC.

Thoughts?

Larry

Hello everyone,

 

Please recommend tutorial materials and group lists for Google Meets, Canvas, and Wordpress. These are new adoptions at my work place and I have to learn them immediately.

 

Many thanks.

 

Marilyn

 

Dave

 

----- Original Message -----

From: Joseph Lee

To: main@jfw.groups.io

Sent: Saturday, 15 August, 2020 5:02 PM

Subject: Re: Chimes which keep being sounded in a new installation of Windows 10

Hi,

Try pressing Windows+Shift=V and see if JAWS speaks notification texts.

Cheers,

Joseph

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: Saturday, August 15, 2020 3:26 AM
To: jfw@groups.io
Subject: Chimes which keep being sounded in a new installation of Windows 10

 

Hello everyone:

 

I have just installed Windows 10 on a friend's laptop.

 

For some reason, only understandable to Microsoft, Windows 10 keeps issuing sounds, which indicate something but, no window appears on the screen for JAWS to speak its content thus, leaving me very exasperated as to how to find out what the tone indicators mean.

 

Any ideas?

 

Dave

 

Hello, list:

When reading a pdf file, how do I insert a place marker using Jaws then return to find that spot?  Thanks in advance.

Louise