Date   

moderated Re: whatsapp web

Suratim
 

hello,
whatsapp web accessible with jaws.
try virtual cursor off when you navigate from chat to another.
also, you are able to make call and video call using whatsapp desktop with JAWS

On 3/24/21, Faraz <faraz.aqureshi@gmail.com> wrote:
hello, i am using jaws 2019 and have to work on whats app for my
business. I wanting to use whatsapp on my laptop but finding hard using
that with jaws. I am in searching for any scripts or solution which
helps me in working whatsapp web with jaws ?

your help would be hightly appreciated.


Faraz.

--

With best regards,
Faraz q.
C.E.O. Estate Point
Cell\Whats app\Face time: +923218405089
www.facebook.com/estatepoint786






--
best and regards,
Suratim
Official Telelight's reseller
twitter: @suratim
facebook: fb.me/suratiminfo
whatsapp / telegram: +6281535213878
telegram channel: https://t.me/aksesibel


moderated Re: Zoom microphone

Marty Hutchings
 

You can adjust your microphone volume in the Zoom ap by going to Settings and audio.
 
Love in Christ
Marty
The Gospel is fully accessible to all.
 

Sent: Wednesday, March 24, 2021 5:10 PM
Subject: Zoom microphone
 

It was suggested that my microphone on zoom was too loud so the recording has trouble transcribing it?

How do I turn it down.

 

I went into the volume settings on the pc but only saw the master volume.

 

I didn't see a way to turn down the microphone.

 

Thanks.

 

Justin

 

 


moderated Re: Zoom microphone

Milton Ota
 

To adjust your microphone in Zoom, open Zoom and go to Settings, tab once and arrow down to audio and tab over to adjust your microphone input.

 

If your headset has an adjustment control for the headset you might want to do it there.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Justin Williams
Sent: Wednesday, March 24, 2021 5:11 PM
To: main@jfw.groups.io
Subject: Zoom microphone

 

It was suggested that my microphone on zoom was too loud so the recording has trouble transcribing it?

How do I turn it down.

 

I went into the volume settings on the pc but only saw the master volume.

 

I didn't see a way to turn down the microphone.

 

Thanks.

 

Justin

 

 


moderated Zoom microphone

Justin Williams
 

It was suggested that my microphone on zoom was too loud so the recording has trouble transcribing it?

How do I turn it down.

 

I went into the volume settings on the pc but only saw the master volume.

 

I didn't see a way to turn down the microphone.

 

Thanks.

 

Justin

 

 


moderated Re: thunder bird question.

 

This was written ages ago, but still applies.  I'll quote the line that is pretty much exactly what Randy Barnett has already said, but the full tutorial that includes it follows:

To get to attachments on an incoming message hit ALT+M, H  [Opens the Message Menu and selects the Attachments option]

-------------------------

Thunderbird e-mail client

IMPORTANT:  For those using Thunderbird with a screen reader I strongly suggest installing the Quick Folder Key Navigation extension.  You will only need to install this extension once for any instance of Thunderbird you might be using.  This allows you to jump from folder in the folder tree using first letter navigation to move between them.  Without it, this does not always work.   You will only need to install this extension once for any instance of Thunderbird you might be using.  If you are using JAWS or NVDA, searching for this add on within Thunderbird is quite simple:

·         Activate the Tools Menu (ALT+T), add-ons option (followed by A) and tab 3 times, at which point you should be on the Extensions Pane.  If you happen to land on any other pane then use Down Arrow (or Up Arrow) until you hear Extensions.

·         Tab 2 times, which lands you in the search all add-ons edit box. 

·         Then type in Quick Folder Key Navigation, hit enter, and wait a few seconds for the search to complete. 

·         Tab 5 times more gain focus on the list of results.  Then hit Down Arrow to start navigating the list.  Quick Folder Key Navigation should be the first result.

·         Tab 2 times to land on the Install button then hit enter.

·         After the install completes you need to exit Thunderbird and start it up again for this extension to become active

 

Upon opening Thunderbird, you will be in the folder tree sitting on whatever folder you had open the last time you closed it.  You will still have to hit TAB until you reach the folder tree view.

When in the folder tree view you can use first letter navigation to move around (if you installed the extension noted above).

When you are sitting on a folder in the folder tree view hitting TAB will take you to the message list.  You know you’ve arrived when you hear, “List View.”  Use up and/or down arrow to navigate through the list of messages.  [Depending on the screen reader you usually have to hit TAB either once or twice.]

If you are using threaded view, and hear JAWS announce “Level zero, collapsed,” use the right arrow to expand the thread to show all its individual messages.  To collapse the thread, get back to the first message at level zero and hit the left arrow.

When you land on the message you want to read, hit Enter to open it in a dedicated reading tab.

You will use the usual reading commands to read through the message that you use in any other program.

Thunderbird Shortcuts

Hit CTRL+W to close a reading tab and go back to the message list for the folder you had been viewing.

Hit SHIFT+TAB (once or twice) or F6 to move back to the folder tree from the message list for any folder.  This must be done after you delete all messages in a given folder as well.

To select messages in the message list view:

            Once you are in the message list view, and have a specific single message selected:

1.      Holding SHIFT, while at the same time hitting either Up or Down Arrow will continue selecting messages in the direction you are moving.

2.      Holding SHIFT, then hitting PgUp or PgDown will select all messages above or below the currently selected message, respectively, stopping with the first/last one currently displayed in the message list view.

You can use CTRL+A to select all messages, including ones currently not visible in the message list view.  Unless you’re certain about doing whatever you intend to do with ALL messages, use this option with great caution.

To delete messages:

1.      If you are in the message list view, select the message or messages you wish to delete then hit the Delete key.  This will move them to the Trash folder and none will be opened for reading if you use this technique.

2.      If you are reading a message and want to delete it, hit the Delete key and it will delete that message and automatically open the next message in the folder for reading.

To reply to a message you’re reading:  CTRL+R opens the Write window with the subject filled in with “Re:” prefixing it and the text of the message you’re replying to quoted.  Your cursor will be sitting right after the quoted material waiting for you to type.  If  you’re trying to do a Reply All that’s CTRL+Shift+R

To create a new message, regardless of what you’re doing in Thunderbird, hit CTRL+N.  This opens the Write window waiting for you to fill in your addressees in the “To:” edit box.  As you hit Enter after filling in an address or choosing one from the dropdown list of previous addresses another edit box of the same type opens.  If you need to change from “To:” to “CC:” or “BCC:” then hit SHIFT+TAB, use the up/down arrow key to find what you want, then hit TAB again to go to the edit box for the address.

·         To add attachments to an outgoing message, hit CTRL+SHIFT+A to bring up the Attach Files dialog.  It is very similar to a Save dialog except it works “in reverse.”  You will need to navigate to the location of the file you want to attach, select it, then either tab to the Open button or hit ALT+O to attach the file to the message.

To send a message, whether it’s a reply or a new message, hit CTRL+ENTER when you’ve finished composing.  It will send immediately and close the Write window, taking you back to wherever you had been before hitting the reply or new keyboard shortcut.

To get to attachments on an incoming message hit ALT+M, H  [Opens the Message Menu and selects the Attachments option]

 

Creating Folders in Thunderbird

            You can create folders within Thunderbird to organize your e-mail.  The concept is the same as in Windows File Explorer, and the tree view will be the starting point.

1.      In the tree view navigate to the folder or account (if you want the folder directly under the account like Inbox, Sent, etc., typically are) under which you want your new folder nested.  In most cases this will be your e-mail account itself, unless you are creating subfolders within other existing folders.

2.      Hit ALT+F,N,F – File Menu, New Option, Folder Option – after which the New Folder dialog opens and you’ll be in the edit box in which you’ll type the new folder’s name.

3.      Tab to the Create Folder button then hit enter, or hit ALT+R.  Your new folder has been created.

 

Moving Messages Between Folders on Thunderbird

1.      Select the message or messages you wish to move.

2.      Bring up the context menu with the applications/menu key or Shift+F10, then hit M [Move]

3.      You will be presented with a submenu that will vary somewhat depending on your folder structure, you have to drill down through the submenu to locate the folder where you want the selected messages to be moved.

4.      Once you have focus on that folder, hit Enter and the message(s) will be moved there.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

To think is to differ.
      ~ Clarence Darrow


moderated Re: JAWS and reading/responding to comments in Word

Steve Nutt
 

Hi Cynthia,

 

If you have the virtual ribbons turned on, this won’t work, because JAWS screws around with the Office keyboard shortcuts.  I advise turning them off. I hate them personally, but some love them.

 

All the best


Steve

 

--

To subscribe to our News and Special Offers list, go to https://www.comproom.co.uk/subscribe

 

Computer Room Services

77 Exeter Close

Stevenage

Hertfordshire

SG1 4PW

T: +44(0)1438-742286

M: +44(0)7956-334938

F: +44(0)1438-759589

E: steve@...

W: https://www.comproom.co.uk

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cynthia Bruce
Sent: 24 March 2021 14:10
To: main@jfw.groups.io
Subject: Re: JAWS and reading/responding to comments in Word

 

Hi,

 

Sorry it took me so long to post back. It didn’t work, when I press n, it doesn’t take me anywhere. The best I seem to be able to do is to go into the revisions pane and then arrow down until I get to the comment I want to edit or reply to. This is fine when there aren’t many comments. However, it is really time consuming when I am reading and giving feedback to graduate thesis submissions.

 

Thanks, though, for the suggestion.

 

Cynthia

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Adrian Spratt
Sent: March 16, 2021 6:21 PM
To: main@jfw.groups.io
Subject: Re: JAWS and reading/responding to comments in Word

 

Cynthia,

 

I’m going to copy below my notes about a post from another lister, Leo, who describes his solution to this problem. I haven’t so far tried it myself. Note that although he refers to Word 2019, where he says the problem doesn’t exist, his solution appears to apply to earlier versions. If it works for you, I hope you’ll post back. Here goes:

 

I had problems working with office 2016. I'm now working with word 2019 and jaws 2020 and I'm able to reply to any comment. Besides, Whenever jaws comes across a footnote, it verbalizes it correctly. Footnote one, etc.

As for replying to the comments, you can try this:

First, go to the comment, whether listing the comments, (control plus shift plus semi column), or listing the virtual items, (windows key plus column).

However you do it, arrow down to find the comment you want to reply to, and hit enter.

press separately, alt , then r, then n.

Jaws now should announce that you're in the comment pain. Now bring up the context menu, and hopefully, you'll find the comments related options to reply, etc.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cynthia Bruce
Sent: Tuesday, March 16, 2021 11:27 AM
To: main@jfw.groups.io
Subject: JAWS and reading/responding to comments in Word

 

Hi All,

 

I am running the most current version of JAWS 2021, and I think my version of word is current and up to date. I use comments in word a lot so I can provide feedback to students and respond to comments provided by my faculty colleagues. I can access the comments in a list by pressing the windows key + ;. I can also read them in the revisions pane and by pulling up a list using alt shift ;. However, if I come to a comment in the document while reading, I can’t read what is in the comment, and I can’t reply or edit. I have searched for solutions and followed all the steps from MS word help, but I can’t sort out what is going on.

 

Any thoughts?

 

Many thanks,

 

Cynthia


moderated Re: thunder bird question.

Randy Barnett <blindmansbluff09@...>
 

With the message open. Go to the messages menu then arrow down to attachments then right arrow to open or save.

On 3/24/2021 2:27 AM, michaeel's mail wrote:
Hi guys just wondering what people rather have thunder bird show attatchments as in line or attatchments.

I am finding some times they are tricky to read.

With good old windows live mail you could just open the attatchment and read it easy.

But with TB i open it then its in a HTML then i open it and find what is in it.

Cheers Michael.





moderated Re: [External] : Re: JAWS and reading/responding to comments in Word

Ryan Bondroff <deafblindadvocate@...>
 

Hi,  I suggest that you call Microsoft  Disability Answer Desk  so they will help you with this issue.'


On Mar 24, 2021, at 7:40 AM, Cynthia Bruce <cynthia.bruce@...> wrote:



Yes, that is also an issue. I used to be able to select delete comment in the context menu, but not anymore.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Don Mauck
Sent: March 24, 2021 11:16 AM
To: main@jfw.groups.io
Subject: Re: [External] : Re: JAWS and reading/responding to comments in Word

 

I’m struggling with how you remove comments that are already responded to and are no longer needed.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cynthia Bruce
Sent: Wednesday, March 24, 2021 8:10 AM
To: main@jfw.groups.io
Subject: [External] : Re: JAWS and reading/responding to comments in Word

 

Hi,

 

Sorry it took me so long to post back. It didn’t work, when I press n, it doesn’t take me anywhere. The best I seem to be able to do is to go into the revisions pane and then arrow down until I get to the comment I want to edit or reply to. This is fine when there aren’t many comments. However, it is really time consuming when I am reading and giving feedback to graduate thesis submissions.

 

Thanks, though, for the suggestion.

 

Cynthia

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Adrian Spratt
Sent: March 16, 2021 6:21 PM
To: main@jfw.groups.io
Subject: Re: JAWS and reading/responding to comments in Word

 

Cynthia,

 

I’m going to copy below my notes about a post from another lister, Leo, who describes his solution to this problem. I haven’t so far tried it myself. Note that although he refers to Word 2019, where he says the problem doesn’t exist, his solution appears to apply to earlier versions. If it works for you, I hope you’ll post back. Here goes:

 

I had problems working with office 2016. I'm now working with word 2019 and jaws 2020 and I'm able to reply to any comment. Besides, Whenever jaws comes across a footnote, it verbalizes it correctly. Footnote one, etc.

As for replying to the comments, you can try this:

First, go to the comment, whether listing the comments, (control plus shift plus semi column), or listing the virtual items, (windows key plus column).

However you do it, arrow down to find the comment you want to reply to, and hit enter.

press separately, alt , then r, then n.

Jaws now should announce that you're in the comment pain. Now bring up the context menu, and hopefully, you'll find the comments related options to reply, etc.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cynthia Bruce
Sent: Tuesday, March 16, 2021 11:27 AM
To: main@jfw.groups.io
Subject: JAWS and reading/responding to comments in Word

 

Hi All,

 

I am running the most current version of JAWS 2021, and I think my version of word is current and up to date. I use comments in word a lot so I can provide feedback to students and respond to comments provided by my faculty colleagues. I can access the comments in a list by pressing the windows key + ;. I can also read them in the revisions pane and by pulling up a list using alt shift ;. However, if I come to a comment in the document while reading, I can’t read what is in the comment, and I can’t reply or edit. I have searched for solutions and followed all the steps from MS word help, but I can’t sort out what is going on.

 

Any thoughts?

 

Many thanks,

 

Cynthia


moderated Re: [External] : Re: JAWS and reading/responding to comments in Word

Cynthia Bruce
 

Yes, that is also an issue. I used to be able to select delete comment in the context menu, but not anymore.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Don Mauck
Sent: March 24, 2021 11:16 AM
To: main@jfw.groups.io
Subject: Re: [External] : Re: JAWS and reading/responding to comments in Word

 

I’m struggling with how you remove comments that are already responded to and are no longer needed.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cynthia Bruce
Sent: Wednesday, March 24, 2021 8:10 AM
To: main@jfw.groups.io
Subject: [External] : Re: JAWS and reading/responding to comments in Word

 

Hi,

 

Sorry it took me so long to post back. It didn’t work, when I press n, it doesn’t take me anywhere. The best I seem to be able to do is to go into the revisions pane and then arrow down until I get to the comment I want to edit or reply to. This is fine when there aren’t many comments. However, it is really time consuming when I am reading and giving feedback to graduate thesis submissions.

 

Thanks, though, for the suggestion.

 

Cynthia

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Adrian Spratt
Sent: March 16, 2021 6:21 PM
To: main@jfw.groups.io
Subject: Re: JAWS and reading/responding to comments in Word

 

Cynthia,

 

I’m going to copy below my notes about a post from another lister, Leo, who describes his solution to this problem. I haven’t so far tried it myself. Note that although he refers to Word 2019, where he says the problem doesn’t exist, his solution appears to apply to earlier versions. If it works for you, I hope you’ll post back. Here goes:

 

I had problems working with office 2016. I'm now working with word 2019 and jaws 2020 and I'm able to reply to any comment. Besides, Whenever jaws comes across a footnote, it verbalizes it correctly. Footnote one, etc.

As for replying to the comments, you can try this:

First, go to the comment, whether listing the comments, (control plus shift plus semi column), or listing the virtual items, (windows key plus column).

However you do it, arrow down to find the comment you want to reply to, and hit enter.

press separately, alt , then r, then n.

Jaws now should announce that you're in the comment pain. Now bring up the context menu, and hopefully, you'll find the comments related options to reply, etc.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cynthia Bruce
Sent: Tuesday, March 16, 2021 11:27 AM
To: main@jfw.groups.io
Subject: JAWS and reading/responding to comments in Word

 

Hi All,

 

I am running the most current version of JAWS 2021, and I think my version of word is current and up to date. I use comments in word a lot so I can provide feedback to students and respond to comments provided by my faculty colleagues. I can access the comments in a list by pressing the windows key + ;. I can also read them in the revisions pane and by pulling up a list using alt shift ;. However, if I come to a comment in the document while reading, I can’t read what is in the comment, and I can’t reply or edit. I have searched for solutions and followed all the steps from MS word help, but I can’t sort out what is going on.

 

Any thoughts?

 

Many thanks,

 

Cynthia


moderated Re: [External] : Re: JAWS and reading/responding to comments in Word

Don Mauck
 

I’m struggling with how you remove comments that are already responded to and are no longer needed.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cynthia Bruce
Sent: Wednesday, March 24, 2021 8:10 AM
To: main@jfw.groups.io
Subject: [External] : Re: JAWS and reading/responding to comments in Word

 

Hi,

 

Sorry it took me so long to post back. It didn’t work, when I press n, it doesn’t take me anywhere. The best I seem to be able to do is to go into the revisions pane and then arrow down until I get to the comment I want to edit or reply to. This is fine when there aren’t many comments. However, it is really time consuming when I am reading and giving feedback to graduate thesis submissions.

 

Thanks, though, for the suggestion.

 

Cynthia

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Adrian Spratt
Sent: March 16, 2021 6:21 PM
To: main@jfw.groups.io
Subject: Re: JAWS and reading/responding to comments in Word

 

Cynthia,

 

I’m going to copy below my notes about a post from another lister, Leo, who describes his solution to this problem. I haven’t so far tried it myself. Note that although he refers to Word 2019, where he says the problem doesn’t exist, his solution appears to apply to earlier versions. If it works for you, I hope you’ll post back. Here goes:

 

I had problems working with office 2016. I'm now working with word 2019 and jaws 2020 and I'm able to reply to any comment. Besides, Whenever jaws comes across a footnote, it verbalizes it correctly. Footnote one, etc.

As for replying to the comments, you can try this:

First, go to the comment, whether listing the comments, (control plus shift plus semi column), or listing the virtual items, (windows key plus column).

However you do it, arrow down to find the comment you want to reply to, and hit enter.

press separately, alt , then r, then n.

Jaws now should announce that you're in the comment pain. Now bring up the context menu, and hopefully, you'll find the comments related options to reply, etc.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cynthia Bruce
Sent: Tuesday, March 16, 2021 11:27 AM
To: main@jfw.groups.io
Subject: JAWS and reading/responding to comments in Word

 

Hi All,

 

I am running the most current version of JAWS 2021, and I think my version of word is current and up to date. I use comments in word a lot so I can provide feedback to students and respond to comments provided by my faculty colleagues. I can access the comments in a list by pressing the windows key + ;. I can also read them in the revisions pane and by pulling up a list using alt shift ;. However, if I come to a comment in the document while reading, I can’t read what is in the comment, and I can’t reply or edit. I have searched for solutions and followed all the steps from MS word help, but I can’t sort out what is going on.

 

Any thoughts?

 

Many thanks,

 

Cynthia


moderated Re: JAWS and reading/responding to comments in Word

Cynthia Bruce
 

Hi,

 

Sorry it took me so long to post back. It didn’t work, when I press n, it doesn’t take me anywhere. The best I seem to be able to do is to go into the revisions pane and then arrow down until I get to the comment I want to edit or reply to. This is fine when there aren’t many comments. However, it is really time consuming when I am reading and giving feedback to graduate thesis submissions.

 

Thanks, though, for the suggestion.

 

Cynthia

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Adrian Spratt
Sent: March 16, 2021 6:21 PM
To: main@jfw.groups.io
Subject: Re: JAWS and reading/responding to comments in Word

 

Cynthia,

 

I’m going to copy below my notes about a post from another lister, Leo, who describes his solution to this problem. I haven’t so far tried it myself. Note that although he refers to Word 2019, where he says the problem doesn’t exist, his solution appears to apply to earlier versions. If it works for you, I hope you’ll post back. Here goes:

 

I had problems working with office 2016. I'm now working with word 2019 and jaws 2020 and I'm able to reply to any comment. Besides, Whenever jaws comes across a footnote, it verbalizes it correctly. Footnote one, etc.

As for replying to the comments, you can try this:

First, go to the comment, whether listing the comments, (control plus shift plus semi column), or listing the virtual items, (windows key plus column).

However you do it, arrow down to find the comment you want to reply to, and hit enter.

press separately, alt , then r, then n.

Jaws now should announce that you're in the comment pain. Now bring up the context menu, and hopefully, you'll find the comments related options to reply, etc.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Cynthia Bruce
Sent: Tuesday, March 16, 2021 11:27 AM
To: main@jfw.groups.io
Subject: JAWS and reading/responding to comments in Word

 

Hi All,

 

I am running the most current version of JAWS 2021, and I think my version of word is current and up to date. I use comments in word a lot so I can provide feedback to students and respond to comments provided by my faculty colleagues. I can access the comments in a list by pressing the windows key + ;. I can also read them in the revisions pane and by pulling up a list using alt shift ;. However, if I come to a comment in the document while reading, I can’t read what is in the comment, and I can’t reply or edit. I have searched for solutions and followed all the steps from MS word help, but I can’t sort out what is going on.

 

Any thoughts?

 

Many thanks,

 

Cynthia


moderated Re: turn off email notifications

Stan Holdeman
 

Thanks, Bill and Richard. Time will tell for sure, but I think that did the trick.

 

Stan

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Bill White
Sent: Tuesday, March 23, 2021 5:06 PM
To: main@jfw.groups.io
Subject: Re: turn off email notifications

 

Hi, Stan.

 

1. Open Outlook.

2. Press ALT, followed by F, then T for Options.

3. Arrow down to Mail, but do not press ENTER.

4. TAB to Display a Desktop Alert, and make sure this box is not checked.

5. TAB to OK, and press ENTER.

This should suppress desktop alerts, which is what you may be experiencing as notifications.

 

Bill White

 

billwhite92701@...

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Stan Holdeman
Sent: Tuesday, March 23, 2021 2:00 PM
To: JFW list (main@jfw.groups.io)
Subject: turn off email notifications

 

Listers: How do I turn off email notifications from Outlook 2016? As it now they intrude even when I am doing other apps.

 

Running Windows 10 and jaws 2021.

 

Stan

 

Stan

 


moderated whatsapp web

Faraz
 

hello, i am using jaws 2019 and have to work on whats app for my business. I wanting to use whatsapp on my laptop but finding hard using that with jaws. I am in searching for any scripts or solution which helps me in working whatsapp web with jaws ?

your help would be hightly appreciated.


Faraz.

--

With best regards,
Faraz q.
C.E.O. Estate Point
Cell\Whats app\Face time: +923218405089
www.facebook.com/estatepoint786


moderated thunder bird question.

michaeel's mail
 

Hi guys just wondering what people rather have thunder bird show attatchments as in line or attatchments.

I am finding some times they are tricky to read.

With good old windows live mail you could just open the attatchment and read it easy.

But with TB i open it then its in a HTML then i open it and find what is in it.

Cheers Michael.


moderated Re: Reposting: Jaws 2019 with Office 365 Calendar

Richard Turner
 

Here is the reply I had sent when you first posted your question:


I did that when I was working.
There are two ways to approach this in my opinion.
You can set a repeating appointment titled Intake to repeat weekly on Monday, Wednesday, Friday.
Then, when you have a name, edit that dates appointment, and apply it to only that date and not the series.
Or, Schedule the repeating appointment the same way, but have it set as Free rather than Busy, then add a separate appointment for the person on that date and time, so you'll have two appointments at the same time, one as Intake, and one with the person's name.
Either way, it is a bit of a pain.


Richard

"You know," said Arthur, "it's at times like this, when I'm trapped in a Vogon airlock with a man from Betelgeuse, and about to die of asphyxiation in deep space, that I really wish I'd listened to what my mother told me when I was young."
"Why, what did she tell you?"
"I don't know, I didn't listen."
-- Douglas Adams, The Hitchhiker's Guide To The Galaxy

On Mar 19, 2021, at 6:59 PM, Claudia <claudiadr2013@...> wrote:

Hello,


on my work laptop, I am using Jaws 2020, with Office 365.

I have to schedule intakes on my calendar, so here is my question.

I do intake interviews as part of my work, and they are recurring appointments but with new applicants every week but at the same time.

If I set up the appointments in the Office 365 calendar, I can't seem to view the individual names, for the respective days.

In other words, my calendar might look like this.


Intake  9 AM

Intake 10 AM.

Intake  11 AM

Intake 12 PM

But, I need these appointments to occur every week. If I set up the recurring appointment, I cannot figure out how to see the different names, from week to week, during that scheduled time slot.


Thanks.


Claudia

Follow Me on Twitter:

@claudiadelreal7

Musings from My Little Corner of the World, is now available on Spotify:

https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fopen.spotify.com%2Fshow%2F2SQoh6LlYoIlU43WhxFILi&amp;data=04%7C01%7C%7C07f2e5ada24b477bb9a308d8eb43ce71%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637518023739781920%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=h2Jp8mrhP3PXXrR4uq3djR8AahTjSGaDRP%2FbezZ3Gq0%3D&amp;reserved=0







moderated Re: Reposting: Jaws 2019 with Office 365 Calendar

 

Claudia, I presume you're referring to your previous topic:  Jaws and Office 365 Calendar

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

To think is to differ.
      ~ Clarence Darrow


moderated Reposting: Jaws 2019 with Office 365 Calendar

Claudia
 

i'm sorry for the repost, but I think I accidentally deleted the message of whoever replied to this.

Thanks.



Jaws and Office 365 Calendar
Hello,

on my work laptop, I am using Jaws 2020, with Office 365.

I have to schedule intakes on my calendar, so here is my question.

I do intake interviews as part of my work, and they are recurring appointments but with new applicants every week but at the same time.

If I set up the appointments in the Office 365 calendar, I can't seem to view the individual names, for the respective days.

In other words, my calendar might look like this.

Intake  9 AM

Intake 10 AM.

Intake  11 AM

Intake 12 PM

But, I need these appointments to occur every week. If I set up the recurring appointment, I cannot figure out how to see the different names, from week
to week, during that scheduled time slot.

Thanks.

Claudia

Follow Me on Twitter:

@claudiadelreal7

Musings from My Little Corner of the World, is now available on Spotify:

https://open.spotify.com/show/2SQoh6LlYoIlU43WhxFILi


moderated Re: zoom equipment.

JM Casey
 

You can use any microphone or camera that works in Windows. So yeah, your internal mic and camera would be fine. That said if you care much about sound quality, most internal laptop mics are not great in my limited experience. Still, fine for zoom or whatever – consider something  better maybe if you are planning to do presentations.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Madison Martin
Sent: March 23, 2021 06:16 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

I have a question, can I use the camera and internal micraphone that are on this laptop,  or do I need to buy external versions of both/either?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jason White via groups.io
Sent: March 23, 2021 5:10 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

Yes, you should be able to change the Windows default sound device (input and output separately) in Sound settings using the combo boxes.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: Tuesday, 23 March 2021 17:51
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

Marty,

I bought one of these USB sound card plug-ins a couple months ago and wonder if you can answer a question.  Currently, if I plug this dongle into the USB port, JAWS and Windows sounds immediately start going through the earbud I’ve attached to the dongle.  The same occurs if I plug a USB headset directly into the USB port.  This has been nice, as it allows me to quickly move to earbuds or the dongle on the fly if I receive a phone call or start a meeting on my computer.  My experience doesn’t align to your steps though, as it sounds like you were expecting me to have to manually route sounds to the USB sound card via JAWS utilities.  I guess I’m trying to sort out in my head, if I start messin with settings as you describe them to separate Windows & JAWS sounds into two different sound cards, Is it relatively easy to do on the fly?  That is, I normally listen to everyting through the laptop speakers.  If I’m on a web-meeting, I want everything to come through my USB earphones with a built in microphone.  If I’m on a webinar and want to multi-task or type notes, I want to separate JAWS and the other sounds so that I can focus more easily.  I just plugged my USB sound card in, then was able to use the JAWS utilities to move JAWS sounds back to the Windows sound card, leaving Windows souns in my earsbuds. That’s the opposite of what I’d want to happen, so I’m guessing I need to find sound settings in Windows to change that default behavior. 

 

Maybe the simplest thing is to hear what your experience is with using a sounds card for on the fly changes.

 

Robin

JAWS 2021, Windows 10, Office 365.

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, March 23, 2021 10:02 AM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

 

Yes,  For around $12 on Amazon, you can get a little USB dongle that has a microphone and headphone jack.  Just plug it into any USB port then after it installs, press JAWS key + J to get to the JAWS context menu.  Down Arrow to the Utilities Sub menu, Right Arrow and Down Arrow to Sound Cards Sub Menu.  Right arrow and Down Arrow to the new sound card and hit Enter to select it as your new JAWS sound card.  Be sure that you plug in an ear bud or head phones to the correct jack on the dongle, because  as soon as you hit enter on the sound card, JAWS will instantly switch to this device and stop coming through your speakers.  Now, you will only hear your windows sounds and Zoom participants in your speakers and only you will hear JAWS in your ear.  To adjust the volume of JAWS, you will need to go to the Windows Mixer.

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Tuesday, March 23, 2021 1:31 AM

Subject: Re: zoom equipment.

 

Okay, I like that.

 

I knew I'd heard of some way of doing that?

 

So with the usb adapter, JaWS can't be heard by my zoom folks?  It can only be heard by me?

 

Justin

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marty Hutchings
Sent: Monday, March 22, 2021 4:45 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

You could use a USB sound card adapter to run JAWS through.  You can also set up Zoom to be on mute until you need to speak then press the Space bar to speak and release to be muted.  Just use JAWS when you are muted.

 

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Monday, March 22, 2021 3:36 PM

Subject: zoom equipment.

 

What do I have to buy in order to use jaws and zoom on my pc without people hearing jaws?

I'd like to use jaws without earphones and have people not hear jaws.

 

Thanks,

 

Justin

 

 

 

 

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: zoom equipment.

Marty Hutchings
 

Robin,  I do not do on the fly changes with my system as I have things set the way I want them for Zoom and regular computing needs.  My set up is on a desktop running Windows 7 and JAWS 21.  My JAWS runs through the built in sound card and my windows sounds and Zoom are running through a Sound Blaster card.
 
Love in Christ
Marty
The Gospel is fully accessible to all.
 

Sent: Tuesday, March 23, 2021 4:50 PM
Subject: Re: zoom equipment.
 

Marty,

I bought one of these USB sound card plug-ins a couple months ago and wonder if you can answer a question.  Currently, if I plug this dongle into the USB port, JAWS and Windows sounds immediately start going through the earbud I’ve attached to the dongle.  The same occurs if I plug a USB headset directly into the USB port.  This has been nice, as it allows me to quickly move to earbuds or the dongle on the fly if I receive a phone call or start a meeting on my computer.  My experience doesn’t align to your steps though, as it sounds like you were expecting me to have to manually route sounds to the USB sound card via JAWS utilities.  I guess I’m trying to sort out in my head, if I start messin with settings as you describe them to separate Windows & JAWS sounds into two different sound cards, Is it relatively easy to do on the fly?  That is, I normally listen to everyting through the laptop speakers.  If I’m on a web-meeting, I want everything to come through my USB earphones with a built in microphone.  If I’m on a webinar and want to multi-task or type notes, I want to separate JAWS and the other sounds so that I can focus more easily.  I just plugged my USB sound card in, then was able to use the JAWS utilities to move JAWS sounds back to the Windows sound card, leaving Windows souns in my earsbuds. That’s the opposite of what I’d want to happen, so I’m guessing I need to find sound settings in Windows to change that default behavior. 

 

Maybe the simplest thing is to hear what your experience is with using a sounds card for on the fly changes.

 

Robin

JAWS 2021, Windows 10, Office 365.

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, March 23, 2021 10:02 AM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

 

Yes,  For around $12 on Amazon, you can get a little USB dongle that has a microphone and headphone jack.  Just plug it into any USB port then after it installs, press JAWS key + J to get to the JAWS context menu.  Down Arrow to the Utilities Sub menu, Right Arrow and Down Arrow to Sound Cards Sub Menu.  Right arrow and Down Arrow to the new sound card and hit Enter to select it as your new JAWS sound card.  Be sure that you plug in an ear bud or head phones to the correct jack on the dongle, because  as soon as you hit enter on the sound card, JAWS will instantly switch to this device and stop coming through your speakers.  Now, you will only hear your windows sounds and Zoom participants in your speakers and only you will hear JAWS in your ear.  To adjust the volume of JAWS, you will need to go to the Windows Mixer.

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Tuesday, March 23, 2021 1:31 AM

Subject: Re: zoom equipment.

 

Okay, I like that.

 

I knew I'd heard of some way of doing that?

 

So with the usb adapter, JaWS can't be heard by my zoom folks?  It can only be heard by me?

 

Justin

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marty Hutchings
Sent: Monday, March 22, 2021 4:45 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

You could use a USB sound card adapter to run JAWS through.  You can also set up Zoom to be on mute until you need to speak then press the Space bar to speak and release to be muted.  Just use JAWS when you are muted.

 

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Monday, March 22, 2021 3:36 PM

Subject: zoom equipment.

 

What do I have to buy in order to use jaws and zoom on my pc without people hearing jaws?

I'd like to use jaws without earphones and have people not hear jaws.

 

Thanks,

 

Justin

 

 

 

 

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: zoom equipment.

Madison Martin
 

I have a question, can I use the camera and internal micraphone that are on this laptop,  or do I need to buy external versions of both/either?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jason White via groups.io
Sent: March 23, 2021 5:10 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

Yes, you should be able to change the Windows default sound device (input and output separately) in Sound settings using the combo boxes.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Van Lant, Robin via groups.io
Sent: Tuesday, 23 March 2021 17:51
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

Marty,

I bought one of these USB sound card plug-ins a couple months ago and wonder if you can answer a question.  Currently, if I plug this dongle into the USB port, JAWS and Windows sounds immediately start going through the earbud I’ve attached to the dongle.  The same occurs if I plug a USB headset directly into the USB port.  This has been nice, as it allows me to quickly move to earbuds or the dongle on the fly if I receive a phone call or start a meeting on my computer.  My experience doesn’t align to your steps though, as it sounds like you were expecting me to have to manually route sounds to the USB sound card via JAWS utilities.  I guess I’m trying to sort out in my head, if I start messin with settings as you describe them to separate Windows & JAWS sounds into two different sound cards, Is it relatively easy to do on the fly?  That is, I normally listen to everyting through the laptop speakers.  If I’m on a web-meeting, I want everything to come through my USB earphones with a built in microphone.  If I’m on a webinar and want to multi-task or type notes, I want to separate JAWS and the other sounds so that I can focus more easily.  I just plugged my USB sound card in, then was able to use the JAWS utilities to move JAWS sounds back to the Windows sound card, leaving Windows souns in my earsbuds. That’s the opposite of what I’d want to happen, so I’m guessing I need to find sound settings in Windows to change that default behavior. 

 

Maybe the simplest thing is to hear what your experience is with using a sounds card for on the fly changes.

 

Robin

JAWS 2021, Windows 10, Office 365.

 

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Marty Hutchings
Sent: Tuesday, March 23, 2021 10:02 AM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

WARNING: This email originated externally. Exercise caution. Think before clicking links or opening attachments.

 

 

Yes,  For around $12 on Amazon, you can get a little USB dongle that has a microphone and headphone jack.  Just plug it into any USB port then after it installs, press JAWS key + J to get to the JAWS context menu.  Down Arrow to the Utilities Sub menu, Right Arrow and Down Arrow to Sound Cards Sub Menu.  Right arrow and Down Arrow to the new sound card and hit Enter to select it as your new JAWS sound card.  Be sure that you plug in an ear bud or head phones to the correct jack on the dongle, because  as soon as you hit enter on the sound card, JAWS will instantly switch to this device and stop coming through your speakers.  Now, you will only hear your windows sounds and Zoom participants in your speakers and only you will hear JAWS in your ear.  To adjust the volume of JAWS, you will need to go to the Windows Mixer.

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Tuesday, March 23, 2021 1:31 AM

Subject: Re: zoom equipment.

 

Okay, I like that.

 

I knew I'd heard of some way of doing that?

 

So with the usb adapter, JaWS can't be heard by my zoom folks?  It can only be heard by me?

 

Justin

 

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Marty Hutchings
Sent: Monday, March 22, 2021 4:45 PM
To: main@jfw.groups.io
Subject: Re: zoom equipment.

 

You could use a USB sound card adapter to run JAWS through.  You can also set up Zoom to be on mute until you need to speak then press the Space bar to speak and release to be muted.  Just use JAWS when you are muted.

 

Love in Christ
Marty
The Gospel is fully accessible to all.

 

Sent: Monday, March 22, 2021 3:36 PM

Subject: zoom equipment.

 

What do I have to buy in order to use jaws and zoom on my pc without people hearing jaws?

I'd like to use jaws without earphones and have people not hear jaws.

 

Thanks,

 

Justin

 

 

 

 

 

This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. No confidentiality or privilege is waived or lost as a result of any transmission errors. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.

This communication is for informational purposes only, is not an offer, solicitation, recommendation or commitment for any transaction or to buy or sell any security or other financial product, and is not intended as investment advice or as a confirmation of any transaction. Any market price, indicative value, estimate, view, opinion, data or other information herein is not warranted as to completeness or accuracy, is subject to change without notice, and KeyBanc Capital Markets Inc. accepts no liability for its use or to update or keep it current. Any views or opinions are those of the individual sender, not necessarily of KeyBanc Capital Markets Inc.

The sender of this communication is a licensed securities representative employed by or associated with KeyBanc Capital Markets Inc. Member FINRA/SIPC and may also represent KeyBank National Association (“KeyBank N.A.”). Securities products and services are offered by KeyBanc Capital Markets Inc. Banking products and services are offered by KeyBank N.A.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.

4561 - 4580 of 92089