Date   
moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Sieghard yeah I mean pbf file not dbf file

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Sieghard Weitzel
Sent: Monday, March 02, 2020 1:00 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

So I think you are referring to "PDF" files and not "DBF" files.


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Sunday, March 1, 2020 5:33 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Mario Here what the message say on openbook

An unknown error has occurred during processing. Please close and restart OpenBook. If the error persists, please contact Freedom Scientific Technical Support.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Saturday, February 29, 2020 10:35 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

this tells me that there was a message being displayed. what does the message say? press insert+b to repeat the message.

what information are you trying to get from this file? a DBF is not an image nor is it a document.

I just realized something... is the file you're trying to OCR a PDF?
Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 8:25 PM
Subject: : Com Pilot instructions
OK Mario !! When I went back open the dbf file in attachment I press alt + p for print then the dialogue box open so I arrow up once intefro printer then press enter then I wait so it was scan into openbook then it was downloaded then jaws say please wait then a message came up to say call freedom scientific something ok button


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 5:15 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

if it does print something, it will be at the least gibberish because it is not an image of text or is a document.
.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in here,I was wondered if it's possible for me to try to used printer info to scan with openbooks !! Do you think that might works? I'm going to try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which holds tectual information. it isn't graphical nore is it a document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom scientific technical support she ask me if I try with OCR then she give me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf file when I press enter on the attachment then I press insert + spacebar then letter o for OCR then I press letter d for document then I waited jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may contain information that is privileged and or confidential and is intended only for the individual or entity to which it is addressed. If you are not the intended recipient, or agent responsible for delivering this communication, you are hereby notified that any dissemination, distribution, copying or disclosure of this communication is strictly prohibited. If you have received this transmission in error, please notify the sender immediately, and delete the original communication and any attachment from any computer, server or other electronic recording or storage device. Receipt by anyone other than the intended recipient is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me that I receive from you today (Thursday) ? Also please tell me what you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and minimum the volume ?

Addison









.









.








.

moderated Re: : Com Pilot instructions

 

So I think you are referring to "PDF" files and not "DBF" files.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of O.Addison Gethers
Sent: Sunday, March 1, 2020 5:33 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Mario Here what the message say on openbook

An unknown error has occurred during processing. Please close and restart OpenBook. If the error persists, please contact Freedom Scientific Technical Support.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Saturday, February 29, 2020 10:35 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

this tells me that there was a message being displayed. what does the message say? press insert+b to repeat the message.

what information are you trying to get from this file? a DBF is not an image nor is it a document.

I just realized something... is the file you're trying to OCR a PDF?
Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 8:25 PM
Subject: : Com Pilot instructions
OK Mario !! When I went back open the dbf file in attachment I press alt + p for print then the dialogue box open so I arrow up once intefro printer then press enter then I wait so it was scan into openbook then it was downloaded then jaws say please wait then a message came up to say call freedom scientific something ok button


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 5:15 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

if it does print something, it will be at the least gibberish because it is not an image of text or is a document.
.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in here,I was wondered if it's possible for me to try to used printer info to scan with openbooks !! Do you think that might works? I'm going to try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which holds tectual information. it isn't graphical nore is it a document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom scientific technical support she ask me if I try with OCR then she give me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf file when I press enter on the attachment then I press insert + spacebar then letter o for OCR then I press letter d for document then I waited jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may contain information that is privileged and or confidential and is intended only for the individual or entity to which it is addressed. If you are not the intended recipient, or agent responsible for delivering this communication, you are hereby notified that any dissemination, distribution, copying or disclosure of this communication is strictly prohibited. If you have received this transmission in error, please notify the sender immediately, and delete the original communication and any attachment from any computer, server or other electronic recording or storage device. Receipt by anyone other than the intended recipient is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me that I receive from you today (Thursday) ? Also please tell me what you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and minimum the volume ?

Addison









.









.








.

moderated Re: facebook messenger issue with chrome/IE and jaws

 

Make sure your browser Window is maximized.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Sunday, March 1, 2020 10:09 AM
To: main@jfw.groups.io
Subject: Re: facebook messenger issue with chrome/IE and jaws

Have you tried replacing the WWW with mbasic in the address field?

----- Original Message -----
From: "James English" <james13english@...>
To: <main@jfw.groups.io>
Sent: Sunday, March 01, 2020 8:05 AM
Subject: facebook messenger issue with chrome/IE and jaws


Hello,

Previously, both chrome and IE were displaying facebook messenger
pages absolutely fine with jaws. However recently, when I log in, I
don't see what would be considered the top half of the screen (the
search box, the settings menu etc), and jaws doesn't read out the
names of the people in my recent messages list.
Does anybody have an idea why this would be/how I can fix it?

- James


moderated Re: using excel mobile with jaws 2020?

 

Also, reporting such things to the Vice President of Software Product Management  at Vispero is probably not the best approach, I doubt Eric has the time to deal with everybody’s little issues, imagine if all Jaws users would send their questions to him, he’d get 10,000 emails a day.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Sunday, March 1, 2020 8:45 AM
To: Jaws user list <main@jfw.groups.io>
Subject: using excel mobile with jaws 2020?

 

Hi,

I

 

Sent from Mail for Windows 10

Was using excel with jaws2020 earlier, and noticed that jaws says, “a”1”, and will not read the cell content.

As a workaround, I’m having to use Narrator.

Is this expected behavior from jaws?

 

How do I report this to FS?

I may email Erik.

 

Thanks,

 

Jessica

 

moderated Re: using excel mobile with jaws 2020?

 

I have no issues with Jaws not reading what’s in cells, but why are you using Excel Mobile and not the desktop version?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jessica D
Sent: Sunday, March 1, 2020 8:45 AM
To: Jaws user list <main@jfw.groups.io>
Subject: using excel mobile with jaws 2020?

 

Hi,

I

 

Sent from Mail for Windows 10

Was using excel with jaws2020 earlier, and noticed that jaws says, “a”1”, and will not read the cell content.

As a workaround, I’m having to use Narrator.

Is this expected behavior from jaws?

 

How do I report this to FS?

I may email Erik.

 

Thanks,

 

Jessica

 

moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Hi Glenn When I restart the computer this afternoon when the windows screen open it's say adobe reader's update so I install the adobe reader's so I went back on the document the adobe readers opens so it's read like this below
029-0308-03_ComPilot_II_User_Guide_V1 00 (3).pdf
3
Phonak ComPilot
II
User Guide
17
18

Phonak ComPilot II
User Guide

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn / Lenny
Sent: Saturday, February 29, 2020 2:33 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Adobe is a good thing to keep.
Once you get one of the offices installed,, hopefully that file type will no
longer be associated with Adobe, but if it is, you may have to go into "open
with..." and select the calc program with the office program you have
installed.
Maybe the office program you install will do this during the install.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Saturday, February 29, 2020 1:13 PM
Subject: Re: : Com Pilot instructions


Hi Glenn Thanks for the links and will download it. Can I still keep adobe
reader or get rid off adobe reader?


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Saturday, February 29, 2020 11:49 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Addison,
You can get Open Office at:
http://www.openoffice.org/
And Libra Office at:
https://www.libreoffice.org/
I used to use Open Office, and switched to Libra Office.
If one doesn't suite your taste, you can use the other.
HTH.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Saturday, February 29, 2020 7:14 AM
Subject: Re: : Com Pilot instructions


Glenn then what other suggestion I have ?
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 9:36 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I'm not sure if Adobe will read data base files. But if it does, I'd
suggest that it's not the best choice for accessing such files.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 8:31 PM
Subject: Re: : Com Pilot instructions


Hi Glenn Well I opens the document then wait for 1 or 2 minute adobe
reader didn't appear on there where I would hear it's say adobe reader left
to right something so I can press enter on it


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 8:43 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Addison,
That sounds like it would be best for PDF files, not the type you want to
access.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 7:31 PM
Subject: Re: : Com Pilot instructions


Glenn I do have adobe reader


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination, distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.

moderated Re: : Com Pilot instructions

O.Addison Gethers
 

Hi Mario Here what the message say on openbook

An unknown error has occurred during processing. Please close and restart OpenBook. If the error persists, please contact Freedom Scientific Technical Support.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Saturday, February 29, 2020 10:35 AM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

this tells me that there was a message being displayed. what does the
message say? press insert+b to repeat the message.

what information are you trying to get from this file? a DBF is not an
image nor is it a document.

I just realized something... is the file you're trying to OCR a PDF?
Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 8:25 PM
Subject: : Com Pilot instructions
OK Mario !! When I went back open the dbf file in attachment I press
alt + p for print then the dialogue box open so I arrow up once intefro
printer then press enter then I wait so it was scan into openbook then
it was downloaded then jaws say please wait then a message came up to
say call freedom scientific something ok button


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 5:15 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

if it does print something, it will be at the least gibberish because it
is not an image of text or is a document.
.
-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 4:43 PM
Subject: : Com Pilot instructions
Mario I was just doing some thinking while listen to your message in
here,I was wondered if it's possible for me to try to used printer info
to scan with openbooks !! Do you think that might works? I'm going to
try it to se what happen from there.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format
which holds tectual information. it isn't graphical nore is it a
document, so JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction
Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's
OCR feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is
dbf file when I press enter on the attachment then I press insert +
spacebar then letter o for OCR then I press letter d for document
then I waited jaws not reading anything yet !! What am I doing wrong in
here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://protect2.fireeye.com/url?k=89c08575-d541b716-89c27c40-000babd9069e-
8ebbd6436b1fc22b&u=http://www.hknc.org/>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may contain information that is privileged and or confidential and is
intended only for the individual or entity to which it is addressed. If
you are not the intended recipient, or agent responsible for delivering
this communication, you are hereby notified that any dissemination,
distribution, copying or disclosure of this communication is strictly
prohibited. If you have received this transmission in error, please
notify the sender immediately, and delete the original communication and
any attachment from any computer, server or other electronic recording
or storage device. Receipt by anyone other than the intended recipient
is not a waiver of any privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me that I receive from you today (Thursday) ? Also please tell me what
you showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.









.








.

moderated Re: facebook messenger issue with chrome/IE and jaws

James English
 

Hi,

Unfortunately that had no effect.

- James

On 3/1/20, Glenn / Lenny <glennervin@...> wrote:
Have you tried replacing the WWW with mbasic in the address field?

----- Original Message -----
From: "James English" <james13english@...>
To: <main@jfw.groups.io>
Sent: Sunday, March 01, 2020 8:05 AM
Subject: facebook messenger issue with chrome/IE and jaws


Hello,

Previously, both chrome and IE were displaying facebook messenger
pages absolutely fine with jaws. However recently, when I log in, I
don't see what would be considered the top half of the screen (the
search box, the settings menu etc), and jaws doesn't read out the
names of the people in my recent messages list.
Does anybody have an idea why this would be/how I can fix it?

- James





moderated Re: facebook messenger issue with chrome/IE and jaws

Glenn / Lenny
 

Have you tried replacing the WWW with mbasic in the address field?

----- Original Message -----
From: "James English" <james13english@...>
To: <main@jfw.groups.io>
Sent: Sunday, March 01, 2020 8:05 AM
Subject: facebook messenger issue with chrome/IE and jaws


Hello,

Previously, both chrome and IE were displaying facebook messenger
pages absolutely fine with jaws. However recently, when I log in, I
don't see what would be considered the top half of the screen (the
search box, the settings menu etc), and jaws doesn't read out the
names of the people in my recent messages list.
Does anybody have an idea why this would be/how I can fix it?

- James

moderated Re: does jfw work very well with firefox?

Glenn / Lenny
 


Hank,
Maybe someone has already answered this, but you are already connected to the Internet when you boot up the computer, so you don't need to enter any of that into your browser.
Glenn

----- Original Message -----
Sent: Sunday, March 01, 2020 7:22 AM
Subject: Re: does jfw work very well with firefox?

 
Hello back Dave and everyone,
 
First of all, thanks very much for all your very helpful replys to my firefox questions. So I don’t need to create an account in firefox when I first start using it after I get a newer version of Jaws to be able to successfully use it?
 
I am also wondering once I have installed firefox, what are the menu steps I need to do to enter my internet provider user id and password info so I can successfully access the internet when I start firefox each time to do things on the internet? Thanks very much in advance for any help I can maybe get with this.
 
 
 
 
 
 
 
Warmest regards,
All the best,
 
Jaws18 user  
Hank
 
 
From: Dave Durber
Sent: Sunday, March 1, 2020 7:40 AM
To: main@jfw.groups.io
Subject: Re: does jfw work very well with firefox?
 
Hello Hank and everyone:
 
I have been using Water Fox for several months. One of the main reasons I like it, is that you do not need to have an account, in order to use it, in that way, it is like using Internet Explorer.
 
HTH
 
Dave Durber
 
----- Original Message -----
From: Hank William Merchant
To: main@jfw.groups.io
Sent: Friday, February 28, 2020 11:39 PM
Subject: Re: does jfw work very well with firefox?
 
   
Hello Glen,
 
Thanks for your email reply. What version are you using of Jaws with firefox?I have heard that when you are first setting up firefox that you need to first create a account in firefox and that each time after that when you go on the internet with your setup firefox that you need to sign into your firefox account to be able to do anything you want to do on the internet using your setup firefox browser. Can you maybe please tell me if this is the case that you first need to create a acount in firefox and then need to sign into this firefox account each time you open firefox to be able to successfully do anything on the internet? Any help that maybe you can give me on this would be very much appreciated. Much thanks in advance for any help with this.
 
 
 
 
 
 
All the best,
 
Jaws18 user Hank
 
 
From: Glenn / Lenny
Sent: Friday, February 28, 2020 2:43 PM
To: main@jfw.groups.io
Subject: Re: does jfw work very well with firefox?
 
Works fine.
 
----- Original Message -----
From: Hank William Merchant
To: main@jfw.groups.io
Sent: Thursday, February 27, 2020 6:34 PM
Subject: does jfw work very well with firefox?
 
 
Hello,
 
I am still using Jfw 18, can someone maybe please let me know if jfw works very well or maybe not with firefox? Do I maybe need to install jfw scripts before I am able to use jfw with firefox? Thanks in advance for any help I can get with this.
 
 
 
 
 
 
 
All the best,
 
Hank
 
 
 
 

moderated Re: : Com Pilot instructions

Glenn / Lenny
 

Hi Dave,
I cannot comment on NVDA, although I use NVDA, it isn't my primary
screenreader.
Both work well with Jaws, someone recently reported something odd with Libra
and Jaws, but I don't recall the issue.
Glenn

----- Original Message -----
From: "Dave Durber" <d.durber@...>
To: <main@jfw.groups.io>
Sent: Sunday, March 01, 2020 5:52 AM
Subject: Re: : Com Pilot instructions


Hello Glen:

How accessible are these two office programs with JAWS or NVDA?

Dave durber

----- Original Message -----
From: "Glenn / Lenny" <glennervin@...>
To: <main@jfw.groups.io>
Sent: Saturday, February 29, 2020 4:49 PM
Subject: Re: : Com Pilot instructions


Hi Addison,
You can get Open Office at:
http://www.openoffice.org/
And Libra Office at:
https://www.libreoffice.org/
I used to use Open Office, and switched to Libra Office.
If one doesn't suite your taste, you can use the other.
HTH.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Saturday, February 29, 2020 7:14 AM
Subject: Re: : Com Pilot instructions


Glenn then what other suggestion I have ?
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 9:36 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I'm not sure if Adobe will read data base files. But if it does, I'd
suggest that it's not the best choice for accessing such files.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 8:31 PM
Subject: Re: : Com Pilot instructions


Hi Glenn Well I opens the document then wait for 1 or 2 minute adobe
reader didn't appear on there where I would hear it's say adobe reader
left
to right something so I can press enter on it


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 8:43 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Hi Addison,
That sounds like it would be best for PDF files, not the type you want to
access.
Glenn
----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 7:31 PM
Subject: Re: : Com Pilot instructions


Glenn I do have adobe reader


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Glenn /
Lenny
Sent: Friday, February 28, 2020 5:20 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

Addison,
Don't you have Office, or another DB software, like one of the free ones?
Such as Open Office or Libra Office.
Not sure I guess why you are wanting to scan it with OCR.
Glenn

----- Original Message -----
From: "O.Addison Gethers" <o.addisongethers@...>
To: <main@jfw.groups.io>
Sent: Friday, February 28, 2020 3:53 PM
Subject: Re: : Com Pilot instructions


Hi David I'm going to try to see if printer info with openbooks will read
dbf file or not!!
Addison

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of
Patterson,
David K (ITD)
Sent: Friday, February 28, 2020 3:27 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

No - JAWS OCR will not be able to read a .DBF because it is a database
file - You would need to use a DBF viewer but that may not be accessible.

FYI - a DBF holds more than textual information - Data is stored within
the
file in an array with multiple records and fields.

Dr. David K. Patterson

____________________________________________

David K. Patterson
HR/CMS Accessibility Manager
Senior Accessibility Business Systems Analyst
Manager – Assistive Technology Laboratory

Executive Office of Technology Services and Security (EOTSS)
Commonwealth of Massachusetts
1 Ashburton Place – Room 1601
Boston, MA 02108

Office: (617) 626-4650 | Fax: (617) 626-4454

Email: @DrDavid
Web: https://www.mass.gov/eotss-employee-resources

Accessibility Web: www.mass.gov/accessibility/


EOTSS provides secure and quality digital information, services, and tools
to constituents and service providers when and where they need them.

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Mario via
Groups.Io
Sent: Friday, February 28, 2020 2:59 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

I don't think Sherry knows that a DBF file stands for Data Base Format
which
holds tectual information. it isn't graphical nore is it a document, so
JAWS's OCR won't work to read it.


-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <main@jfw.groups.io>
Date: Friday, February 28, 2020, 2:08 PM
Subject: : Com Pilot instructions
Oh smack Mario !! Well I had forward to the email to one of freedom
scientific technical support she ask me if I try with OCR then she give
me the instruction Have you tried using convenient OCR? Steps below.

1. Open the document and wait for it to process.

2. Press insert spacebar. Afterward press O for COR.

3. Press D for document. Jaws will say, document OCR started. Wait for it
to
finish and it will automatically start reading.



Sherry Gomes
So that what I did !! When I try without OCR jaws not reading too.


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Mario
Sent: Friday, February 28, 2020 12:30 PM
To: main@jfw.groups.io
Subject: Re: : Com Pilot instructions

a dbf file is a database file. I don't think it will work with JAWS's OCR
feature.

-------- Original Message --------
From: O.Addison Gethers [mailto:o.addisongethers@...]
To: <jfw@groups.io>
Date: Friday, February 28, 2020, 12:18 PM
Subject: : Com Pilot instructions
Hello All I'm using jaws2019 with window10 desktop computer, this is dbf
file when I press enter on the attachment then I press insert + spacebar
then letter o for OCR then I press letter d for document then I waited
jaws not reading anything yet !! What am I doing wrong in here?

Addison

*From:*Carol Hamer [mailto:carol.hamer@...]
*Sent:* Friday, February 21, 2020 2:59 PM
*To:* O.AddisonGethers@...
*Subject:* Com Pilot instructions

Carol Hamer, MA, F-AAA

Audiologist

HKNC Half

141 Middle Neck Road

Sands Point, NY 11050

516-944-8900 x235, 516-393-7709 Fax: 516-944-7302

carol.hamer@... <mailto:carol.hamer@...>

www.hknc.org
<https://urldefense.proofpoint.com/v2/url?u=https-3A__protect2.fireeye.com_url-3Fk-3D89c08575-2Dd541b716-2D89c27c40-2D000babd9069e-2D&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=fzFgjxjNOhMqIvuwA51stHSTl5Bw39cvzwgze38tdf4&e=
8ebbd6436b1fc22b&u=https://urldefense.proofpoint.com/v2/url?u=http-3A__www.hknc.org_&d=DwIFaQ&c=lDF7oMaPKXpkYvev9V-fVahWL0QWnGCCAfCDz1Bns_w&r=WSUn3uy5hdDgLE8-G0tLaVr20IUoC22LFvgvdVb36r4&m=81jINaD8aYK32hiyH82woVcm10-HWMDSnb3vgrtH4kU&s=nL6m05J_aos_PWJpdSBCk6I7AXugM1k4gGdAxsdfod4&e=>

Office hours: 8:00 - 3:45 on Monday, Wednesday, Thursday and Friday

The information contained in this email transmission and any attachments
may
contain information that is privileged and or confidential and is intended
only for the individual or entity to which it is addressed. If you are not
the intended recipient, or agent responsible for delivering this
communication, you are hereby notified that any dissemination,
distribution,
copying or disclosure of this communication is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately, and delete the original communication and any attachment from
any computer, server or other electronic recording or storage device.
Receipt by anyone other than the intended recipient is not a waiver of any
privilege.

*From:* Addison Gethers [mailto:o.addisongethers@...]
*Sent:* Thursday, February 13, 2020 9:11 PM
*To:* 'Strange, Christine' <strangcc@...>
*Subject:* Hi Christine New copilot icon

Hi Christine

Will you please give me the instruction for the new copilot icon you got
me
that I receive from you today (Thursday) ? Also please tell me what you
showed me the button on icon again by power switch I know there is
2 button on top and what is the other 2 button for ? Is it to max and
minimum the volume ?

Addison









.


































moderated Re: does jfw work very well with firefox?

Glenn / Lenny
 

It might be how you download it.
Maybe install an older stub and it will upgrade to the latest.
Glenn

----- Original Message -----
Sent: Sunday, March 01, 2020 5:49 AM
Subject: Re: does jfw work very well with firefox?

Hello Glen:
 
The last time I installed FireFox, I got prompts to sign up for an account. I could not find an option to bypass the sign up for an account.
 
Dave durber
 
----- Original Message -----
Sent: Saturday, February 29, 2020 4:41 PM
Subject: Re: does jfw work very well with firefox?

Hi Hank,
I am currently using 2019, but I was using it with 18 with no problems.
And no, you don't need to create an account, I've never heard of that.
It's very similar to setting up IE or Chrome, in fact, you can use it just fine without even setting it up, only installing it.
Then you might want to set a home page, which is in preferences.
Good luck.
 
Glenn
----- Original Message -----
Sent: Friday, February 28, 2020 5:39 PM
Subject: Re: does jfw work very well with firefox?

   
Hello Glen,
 
Thanks for your email reply. What version are you using of Jaws with firefox?I have heard that when you are first setting up firefox that you need to first create a account in firefox and that each time after that when you go on the internet with your setup firefox that you need to sign into your firefox account to be able to do anything you want to do on the internet using your setup firefox browser. Can you maybe please tell me if this is the case that you first need to create a acount in firefox and then need to sign into this firefox account each time you open firefox to be able to successfully do anything on the internet? Any help that maybe you can give me on this would be very much appreciated. Much thanks in advance for any help with this.
 
 
 
 
 
 
All the best,
 
Jaws18 user Hank
 
 
From: Glenn / Lenny
Sent: Friday, February 28, 2020 2:43 PM
To: main@jfw.groups.io
Subject: Re: does jfw work very well with firefox?
 
Works fine.
 
----- Original Message -----
From: Hank William Merchant
To: main@jfw.groups.io
Sent: Thursday, February 27, 2020 6:34 PM
Subject: does jfw work very well with firefox?
 
 
Hello,
 
I am still using Jfw 18, can someone maybe please let me know if jfw works very well or maybe not with firefox? Do I maybe need to install jfw scripts before I am able to use jfw with firefox? Thanks in advance for any help I can get with this.
 
 
 
 
 
 
 
All the best,
 
Hank
 
 
 
 

moderated using excel mobile with jaws 2020?

Jessica D
 

Hi,

I

 

Sent from Mail for Windows 10

Was using excel with jaws2020 earlier, and noticed that jaws says, “a”1”, and will not read the cell content.

As a workaround, I’m having to use Narrator.

Is this expected behavior from jaws?

 

How do I report this to FS?

I may email Erik.

 

Thanks,

 

Jessica

 

moderated Re: Test

Mario
 

Welcome.

-------- Original Message --------
From: Anna Givens [mailto:annajee82@...]
To: Jaws List <jfw@groups.io>
Date: Saturday, February 29, 2020, 8:39 PM
Subject: Test
Just making sure my emails are coming through.





.

moderated Re: does jfw work very well with firefox?

JM Casey
 

That’s just a webpage. Hit ctrl-l to go to another page, and go to preferences and assign your own default homepage, and you won’t see that again – unless the sign up option is on the toolbar somewhere and I can’t remember. In any case, you shouldn’t have to worry about bypassing it…

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: March 1, 2020 6:49 AM
To: main@jfw.groups.io
Subject: Re: does jfw work very well with firefox?

 

Hello Glen:

 

The last time I installed FireFox, I got prompts to sign up for an account. I could not find an option to bypass the sign up for an account.

 

Dave durber

 

----- Original Message -----

Sent: Saturday, February 29, 2020 4:41 PM

Subject: Re: does jfw work very well with firefox?

 

Hi Hank,

I am currently using 2019, but I was using it with 18 with no problems.

And no, you don't need to create an account, I've never heard of that.

It's very similar to setting up IE or Chrome, in fact, you can use it just fine without even setting it up, only installing it.

Then you might want to set a home page, which is in preferences.

Good luck.

 

Glenn

----- Original Message -----

Sent: Friday, February 28, 2020 5:39 PM

Subject: Re: does jfw work very well with firefox?

 

   

Hello Glen,

 

Thanks for your email reply. What version are you using of Jaws with firefox?I have heard that when you are first setting up firefox that you need to first create a account in firefox and that each time after that when you go on the internet with your setup firefox that you need to sign into your firefox account to be able to do anything you want to do on the internet using your setup firefox browser. Can you maybe please tell me if this is the case that you first need to create a acount in firefox and then need to sign into this firefox account each time you open firefox to be able to successfully do anything on the internet? Any help that maybe you can give me on this would be very much appreciated. Much thanks in advance for any help with this.

 

 

 

 

 

 

All the best,

 

Jaws18 user Hank

 

 

From: Glenn / Lenny

Sent: Friday, February 28, 2020 2:43 PM

Subject: Re: does jfw work very well with firefox?

 

Works fine.

 

----- Original Message -----

From: Hank William Merchant

Sent: Thursday, February 27, 2020 6:34 PM

Subject: does jfw work very well with firefox?

 

 

Hello,

 

I am still using Jfw 18, can someone maybe please let me know if jfw works very well or maybe not with firefox? Do I maybe need to install jfw scripts before I am able to use jfw with firefox? Thanks in advance for any help I can get with this.

 

 

 

 

 

 

 

All the best,

 

Hank

 

 

 

 

moderated Re: does jfw work very well with firefox?

JM Casey
 

I don’t know where this idea that you need to set up an account with Mozilla to use Firefox came from. Yes, the Mozilla Firefox default webpage that loads when you first start the programme offers you the opportunity to create a mozilla account and lists a few perks for doing so, but it really has nothing to do with whether you can use the browser or not. I have never bothered to do it, though I may someday – there seem to be some privacy related advantagesa nd, after all, I have a google account which is always signed in with Chrome – can’t be any worse than that. :D

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Dave Durber
Sent: March 1, 2020 6:40 AM
To: main@jfw.groups.io
Subject: Re: does jfw work very well with firefox?

 

Hello Hank and everyone:

 

I have been using Water Fox for several months. One of the main reasons I like it, is that you do not need to have an account, in order to use it, in that way, it is like using Internet Explorer.

 

HTH

 

Dave Durber

 

----- Original Message -----

Sent: Friday, February 28, 2020 11:39 PM

Subject: Re: does jfw work very well with firefox?

 

   

Hello Glen,

 

Thanks for your email reply. What version are you using of Jaws with firefox?I have heard that when you are first setting up firefox that you need to first create a account in firefox and that each time after that when you go on the internet with your setup firefox that you need to sign into your firefox account to be able to do anything you want to do on the internet using your setup firefox browser. Can you maybe please tell me if this is the case that you first need to create a acount in firefox and then need to sign into this firefox account each time you open firefox to be able to successfully do anything on the internet? Any help that maybe you can give me on this would be very much appreciated. Much thanks in advance for any help with this.

 

 

 

 

 

 

All the best,

 

Jaws18 user Hank

 

 

From: Glenn / Lenny

Sent: Friday, February 28, 2020 2:43 PM

Subject: Re: does jfw work very well with firefox?

 

Works fine.

 

----- Original Message -----

From: Hank William Merchant

Sent: Thursday, February 27, 2020 6:34 PM

Subject: does jfw work very well with firefox?

 

 

Hello,

 

I am still using Jfw 18, can someone maybe please let me know if jfw works very well or maybe not with firefox? Do I maybe need to install jfw scripts before I am able to use jfw with firefox? Thanks in advance for any help I can get with this.

 

 

 

 

 

 

 

All the best,

 

Hank

 

 

 

 

moderated Re: Newbie to SAP, difficulty while using with JAWS 2020.

muhammadBilal Arshad
 

So, you're also the sap user, great!
Thanks God, its not a citrix environment. 
Would you please share with me what SAP and JAWS version you're using?
Are you using the sap gui to login to the server, with user id and password?
Sap configuration at server end? (if you know them.)
How was the accessibility after enable scripting on server?
For what specific purpose you're using sap? I.e. I have to mostly use it for sending tax receipts.
Perhaps you consider this reply as bombardment of questions but I'm just curious.
Thanks for replying.
Best regards....

moderated facebook messenger issue with chrome/IE and jaws

James English
 

Hello,

Previously, both chrome and IE were displaying facebook messenger
pages absolutely fine with jaws. However recently, when I log in, I
don't see what would be considered the top half of the screen (the
search box, the settings menu etc), and jaws doesn't read out the
names of the people in my recent messages list.
Does anybody have an idea why this would be/how I can fix it?

- James

moderated Re: does jfw work very well with firefox?

Nermin
 

Hi Hank,
 
you don’t really need to enter any provider data. When you’re connected to the internet, the browser will automatically display websites, unless you need a proxi. Or are you refering to checking provider e-mail using your browser?
 
Regards,
Nermin

moderated Re: does jfw work very well with firefox?

Hank William Merchant
 

 
Hello back Dave and everyone,
 
First of all, thanks very much for all your very helpful replys to my firefox questions. So I don’t need to create an account in firefox when I first start using it after I get a newer version of Jaws to be able to successfully use it?
 
I am also wondering once I have installed firefox, what are the menu steps I need to do to enter my internet provider user id and password info so I can successfully access the internet when I start firefox each time to do things on the internet? Thanks very much in advance for any help I can maybe get with this.
 
 
 
 
 
 
 
Warmest regards,
All the best,
 
Jaws18 user  
Hank
 
 

From: Dave Durber
Sent: Sunday, March 1, 2020 7:40 AM
To: main@jfw.groups.io
Subject: Re: does jfw work very well with firefox?
 
Hello Hank and everyone:
 
I have been using Water Fox for several months. One of the main reasons I like it, is that you do not need to have an account, in order to use it, in that way, it is like using Internet Explorer.
 
HTH
 
Dave Durber
 
----- Original Message -----
From: Hank William Merchant
To: main@jfw.groups.io
Sent: Friday, February 28, 2020 11:39 PM
Subject: Re: does jfw work very well with firefox?
 
   
Hello Glen,
 
Thanks for your email reply. What version are you using of Jaws with firefox?I have heard that when you are first setting up firefox that you need to first create a account in firefox and that each time after that when you go on the internet with your setup firefox that you need to sign into your firefox account to be able to do anything you want to do on the internet using your setup firefox browser. Can you maybe please tell me if this is the case that you first need to create a acount in firefox and then need to sign into this firefox account each time you open firefox to be able to successfully do anything on the internet? Any help that maybe you can give me on this would be very much appreciated. Much thanks in advance for any help with this.
 
 
 
 
 
 
All the best,
 
Jaws18 user Hank
 
 
From: Glenn / Lenny
Sent: Friday, February 28, 2020 2:43 PM
To: main@jfw.groups.io
Subject: Re: does jfw work very well with firefox?
 
Works fine.
 
----- Original Message -----
From: Hank William Merchant
To: main@jfw.groups.io
Sent: Thursday, February 27, 2020 6:34 PM
Subject: does jfw work very well with firefox?
 
 
Hello,
 
I am still using Jfw 18, can someone maybe please let me know if jfw works very well or maybe not with firefox? Do I maybe need to install jfw scripts before I am able to use jfw with firefox? Thanks in advance for any help I can get with this.
 
 
 
 
 
 
 
All the best,
 
Hank