Date   

moderated Re: Permision to delete a folder

john.falter
 

Probably the folder or something inside the folder is in use.

On 6/22/2020 12:01 AM, Marty Hutchings wrote:
I am trying to delete a folder from My Music and I keep getting a "Permission Denied.  I must get permission from Marty PC to modify this folder"  I am the administrator of this computer.  Wouldn't I have permission to do anything?  this is a Windows 7 computer with the latest JAWS 2020.

Virus-free. www.avast.com


moderated Re: Reading PDF Documents with Line Numbers

Van Lant, Robin
 

Kelby,
I have an idea for you to try. When the PDF opens, could you hit "J" to open the jump to line dialog box. It might take a bit of trial to figure out what value to enter to skip past the numbers you are hearing at the beginning, but maybe it would save you the arrowing down. If each page has roughly the same number of lines on it, the value you enter would likely be the same for each document or page. Just an idea that I cannot test.

Robin

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of kelby carlson
Sent: Monday, June 15, 2020 6:56 PM
To: main@jfw.groups.io
Subject: Reading PDF Documents with Line Numbers

In my work, I frequently have to read transcripts of proceeding where each of the lines is numbered. When I open a transcript like this in Adobe, frequently all of the line numbers will be at the top of the page and I have to keep arrowing down to get to the text. I know this is a unique problem, but is there anything JAWS can do that will help with this? Right now it takes me longer to read these documents than it should.


This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from Key, send an email to mailto:DNERequests@... with 'No Promotional E-mails' in the SUBJECT line.


moderated Re: I need a refresher course for windows media player. frown.

 

Ripping a CD Using Windows Media Player

What follows presumes that you will be ripping to MP3 format.  Please read all the way through the instructions first, as the information about the MP3Gain Utility and setting up a staging folder for it are every bit as important as the basics of setting up CD ripping.  There is a separate set of instructions focusing on using MP3Gain itself.

1. Open Windows Media Player (WMP) and insert a CD.  You can stop it as soon as it starts playing.  You cannot do the steps that follow unless an audio CD is in the tray and its tracks have been recognized by WMP.

2. Once the CD has been stopped, hit ALT+E to open the Rip Settings dropdown menu.  Make sure you select the file format and audio quality level you wish to have used on future automatic rips.

3. If you happen to have closed the Rip Settings menu ALT+E will open it again.  There are two entries in this menu that immediately follow the Audio Quality entry:

                 a.  Rip CD Automatically

                 b.  Eject CD after ripping

both are check toggles and can be used in whatever combination you'd like.  If your goal is to always just rip a CD immediately without playing it (unless you press the Play button) then both of these should be checked.

That's it.  From the point you've got both of those boxes checked if you insert a CD that has not already been ripped it will immediately be ripped to the location you've set up for your music library (for most of us that's the Music library that Windows has set up out of the box, but it can be changed) and ejected when the rip is complete (or has failed at some point - which is rare).

If you are ripping to MP3 format, and intend to use your resulting files on various players, I strongly suggest you take a look at the free MP3Gain utility.  It saves both your sanity and your ears since the differences in the volume levels used for different albums is substantial.  The program does a statistical analysis of how loud a given track "sounds to the human ear" and adds a tag at the start of the file to adjust it to a target volume (and 89.0 db is their default, and works well).  It does not reencode the file so it has no impact on the sound quality.  I also strongly suggest that you do the following in Windows Media Player so that freshly ripped files go to their own staging folder to be processed with MP3Gain rather than directly into your Music Library, which is where ripped content would go by default:

1.       Open the Tools Menu (ALT+T) then choose Options (O).

2.       Navigate to the Rip Music tab.

3.      In the Rip music to this location section, there will be a folder listed, which defaults to your Music library.  Activate the Change button and then, if you’ve created the folder you want to use ahead of time, navigate to it and activate the OK button.  If you didn’t create it ahead of time, navigate to the folder where you want it to be created, then hit the Create New Folder button, give the new folder a name, then hit OK.  I suggest using your Documents folder and to have a specific folder under there named something like For MP3Gain Processing, so it’s obvious what’s in there needs to be processed.

4.      You can also take this opportunity to recheck your settings under the Rip settings section to ensure that you have the checkboxes for Rip CD automatically and Eject CD after ripping are both checked and your MP3 bit rate (Audio Quality) is set where you want it.  I always use the maximum of 320 Kbps, but many don’t go beyond 192 Kbps.  That choice is entirely yours.

5.      Activate the OK button to close the Options dialog.  If you checked both checkboxes, going forward any time you insert a CD when Windows Media Player is running it will automatically rip the contents to your staging folder and then eject the CD once the rip process is complete.  A rip for most CDs takes several minutes, at most, but the longer the CD the longer the rip time.

You will move the music files from your staging folder to your actual Music library after you have processed them with MP3Gain.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: Deleting numbers and bullets in word 2016

Mike B
 


Here are a couple of notes for this:
 
From: Humberto Avila
What I usually do is go in Word, then press ALT+T followed by the A key. Trust me, this works still. This brings me to the Word autocorrect options dialog.
From here, I would press the Control+Tab keystroke about 3 times till I hear the “Autoformat as you type” page. Hitting Tab then brings me through all
the options available. You can turn off automatic bulleted list, numbered lists ETC, ETC and more ETC. :) :) There are a plethora and myriad of options
you can check off here.
 
Hope this is helpful! You can also get to the Autocorrect options dialog through the Word general options, with ALT+F, then T.
Humberto
 
From: Poppa Bear
Here are the steps in Mail, they work in Word as well. I removed step 2 because it is no longer relevant in newer versions of Word.
1. From the File tab, click Options, Alt/F then letter T.
 
3. In the Proofing section, click AutoCorrect Options.
 
4. Click the AutoFormat As You Type tab.
 
5. In the Apply as you type section, un-check Automatic bulleted lists and Automatic numbered lists.
 
6. Click OK on each dialog box to return to your mailbox.
 
To kill numbering, press control + shift + n.  In effect, you are switching to "normal" style.  The same keystroke works in Microsoft Word.  After you
do that, there will be no numbering.  To resume numbering, move up to the last numbered paragraph, press control + shift + c to copy formatting.
Then, move down to where you want numbering to resume.  Press control + shift + v to paste formatting.
Poppa Bear

Take care.  Mike.  Sent from my iBarstool.
I don't know the key to success, but the key to failure is trying to please everybody.

----- Original Message -----
Sent: Monday, June 22, 2020 10:48 AM
Subject: Re: Deleting numbers and bullets in word 2016

How would I turn off the feature?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Monday, June 22, 2020 01:47 PM
To: main@jfw.groups.io
Subject: Re: Deleting numbers and bullets in word 2016

 

TThe way I would do it, for just deleting them, and not for turning off that feature, which I would also recommend, is to arrow to what you want to delete, and hold the control key and tap the space bar till it says selected.

Then copy, and then do control + H and tab through the fields, and in the find field, do the paste command, and tab to the replace with field and press the delete key and then do alt + A for all.

HTH.

 

----- Original Message -----

Sent: Monday, June 22, 2020 12:42 PM

Subject: Deleting numbers and bullets in word 2016

 

Good afternoon:

 

I'm using Jaws 2019 and Windows 10 with word 2016. Can someone tell me how to delete automatic bullets and numbers?

Thanks.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: M


moderated I need a refresher course for windows media player. frown.

Jim Rawls
 

Hi all,

Since Cdex doesn't work for ripping files now. I guess I am forced to use WMP. Cdex no longer has a data base. And I don't know of any other program that does now. Anyway how do I rip cdex using WMP? I am using jaws 2020 on a windows ten computer. Jim


moderated Re: Deleting numbers and bullets in word 2016

Glenn / Lenny
 


That is in Office settings, if I remember right, you find settings under tools.
It may be on the general tab, but you may have to go to the spelling and grammar tab.
I'm working with an older office, so it may be different in your version, but that is the idea.
Glenn

----- Original Message -----
Sent: Monday, June 22, 2020 12:48 PM
Subject: Re: Deleting numbers and bullets in word 2016

How would I turn off the feature?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Monday, June 22, 2020 01:47 PM
To: main@jfw.groups.io
Subject: Re: Deleting numbers and bullets in word 2016

 

TThe way I would do it, for just deleting them, and not for turning off that feature, which I would also recommend, is to arrow to what you want to delete, and hold the control key and tap the space bar till it says selected.

Then copy, and then do control + H and tab through the fields, and in the find field, do the paste command, and tab to the replace with field and press the delete key and then do alt + A for all.

HTH.

 

----- Original Message -----

Sent: Monday, June 22, 2020 12:42 PM

Subject: Deleting numbers and bullets in word 2016

 

Good afternoon:

 

I'm using Jaws 2019 and Windows 10 with word 2016. Can someone tell me how to delete automatic bullets and numbers?

Thanks.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: M


moderated Re: Deleting numbers and bullets in word 2016

John J. Fioravanti, Jr.
 

How would I turn off the feature?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: Monday, June 22, 2020 01:47 PM
To: main@jfw.groups.io
Subject: Re: Deleting numbers and bullets in word 2016

 

TThe way I would do it, for just deleting them, and not for turning off that feature, which I would also recommend, is to arrow to what you want to delete, and hold the control key and tap the space bar till it says selected.

Then copy, and then do control + H and tab through the fields, and in the find field, do the paste command, and tab to the replace with field and press the delete key and then do alt + A for all.

HTH.

 

----- Original Message -----

Sent: Monday, June 22, 2020 12:42 PM

Subject: Deleting numbers and bullets in word 2016

 

Good afternoon:

 

I'm using Jaws 2019 and Windows 10 with word 2016. Can someone tell me how to delete automatic bullets and numbers?

Thanks.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: M


moderated Re: Deleting numbers and bullets in word 2016

Glenn / Lenny
 


TThe way I would do it, for just deleting them, and not for turning off that feature, which I would also recommend, is to arrow to what you want to delete, and hold the control key and tap the space bar till it says selected.
Then copy, and then do control + H and tab through the fields, and in the find field, do the paste command, and tab to the replace with field and press the delete key and then do alt + A for all.
HTH.
 

----- Original Message -----
Sent: Monday, June 22, 2020 12:42 PM
Subject: Deleting numbers and bullets in word 2016

Good afternoon:

 

I'm using Jaws 2019 and Windows 10 with word 2016. Can someone tell me how to delete automatic bullets and numbers?

Thanks.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: M


moderated Deleting numbers and bullets in word 2016

John J. Fioravanti, Jr.
 

Good afternoon:

 

I'm using Jaws 2019 and Windows 10 with word 2016. Can someone tell me how to delete automatic bullets and numbers?

Thanks.

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Glenn / Lenny
Sent: M


moderated Re: Permission to delete a folder

Glenn / Lenny
 


Before I went to rebooting in safe mode, I'd just reboot and log in as the user for which the folder belongs to.
Glenn

----- Original Message -----
Sent: Monday, June 22, 2020 12:25 PM
Subject: Re: Permission to delete a folder

On Mon, Jun 22, 2020 at 10:37 AM, Marty Hutchings wrote:
What would be the equivalent key stroke for my Windows PC?

If SHIFT+DEL won't do it, then try one of the tutorials returned by:

See:  https://duckduckgo.com/?q=force+delete+windows

The most comprehensive one (which can be more confusing at times) is:  https://windowsedition.com/force-delete-files-folders-windows-10/

I use either Command Prompt or PowerShell, running with elevated admin permission, and the DEL command with the switches noted in most cases if SHIFT+DEL won't work.  If push comes to shove, then it's Safe Mode.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: web site having to enter password twice

Marty Hutchings
 

Does this happen with a different browser?
 
Love in Christ
Marty
If we view this present life as our primary goal, we will agree with William Shakespeare who said: “Life is a tale told by an idiot, full of sound and fury, signifying nothing.” From TODAY IN THE WORD June 1, 2020
 

Sent: Monday, June 22, 2020 9:24 AM
Subject: Re: web site having to enter password twice
 
Not your laptop or issue would happen every time.


On Jun 22, 2020, at 10:16 AM, Kevin Meyers <kman2020@...> wrote:



Hello, I’m using windows10 and most recent version of Jaws2020. When I go to my bank’s web site, I enter my user id and password. The screen comes back and I have to enter a second time. The first time I entered it and tab to logon. The next time I enter it I tab twice and it now says signon. There is no error message saying I entered the wrong user id or password. I made sure I typed in the correct user id and password. I had a friend do it with site and the same problem occurs. I should say the second time I enter it I get on to the site. I have cleaned out all browser data in chrome and then temp files/cookies. The bank say it is not their problem contact support for your laptop. If I want the place I purchased the laptop from, they want 7-10 days to look at it. That is not acceptable. Is it even a problem with my laptop? I can log on to any other site with no problem. The bank says I’m the only one that has this problem. Any thoughts of what I could do? Thanks, Kevin


moderated Re: Permission to delete a folder

 

On Mon, Jun 22, 2020 at 10:37 AM, Marty Hutchings wrote:
What would be the equivalent key stroke for my Windows PC?

If SHIFT+DEL won't do it, then try one of the tutorials returned by:

See:  https://duckduckgo.com/?q=force+delete+windows

The most comprehensive one (which can be more confusing at times) is:  https://windowsedition.com/force-delete-files-folders-windows-10/

I use either Command Prompt or PowerShell, running with elevated admin permission, and the DEL command with the switches noted in most cases if SHIFT+DEL won't work.  If push comes to shove, then it's Safe Mode.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

The purpose of education is not to validate ignorance but to overcome it.
       ~ Lawrence Krauss


moderated Re: jaws cutting in and out with air pods bluetooth headset

Kevin Minor
 

Hi.

 

I’m not the original person asking this question, but I tried this setting with a Bluetooth speaker, and there was no change.

 

Kevin and Valerie, and furry Jilly

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Don Mauck
Sent: Monday, June 22, 2020 12:18 PM
To: main@jfw.groups.io
Subject: Re: jaws cutting in and out with air pods bluetooth headset

 

If you’re using the Latest JAWS2020, you should be able to resolve this in the settings center (default)

Under the User settings there is an option to Avoid Speech  cutoff. It’s the ninth arrow down from the top.

 

 

Regards:

 

Don Mauck | Senior Accessibilityh Evangelist | Accessibility Program Office |  (APO)

 

303.334.4184

Don.mauck@...

 

From: mike mcglashon <michael.mcglashon@...>
Sent: Monday, June 22, 2020 10:07 AM
To: main@jfw.groups.io
Subject: jaws cutting in and out with air pods bluetooth headset

 

Hey guys:

I am test driving some airpods with bluetooth with dell computer, win10, and jaws 2020;

I notice that jaws cuts out, and when I hit insert-t or any jaws command,

The first part of what needs to be said is cut off;

Almost like there is some sort of delay that jaws goes through before speaking through the headset;

Is there anything I can do to fix this?

 

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 


moderated Re: jaws cutting in and out with air pods bluetooth headset

Hozefa Tambawala
 

If you are using JAWS 2020 June built, there is an option to prevent this.

On 6/22/20, mike mcglashon <michael.mcglashon@...> wrote:
Hey guys:

I am test driving some airpods with bluetooth with dell computer, win10,
and
jaws 2020;

I notice that jaws cuts out, and when I hit insert-t or any jaws command,

The first part of what needs to be said is cut off;

Almost like there is some sort of delay that jaws goes through before
speaking through the headset;

Is there anything I can do to fix this?





Please advise as you like.



Mike M.



Mike mcglashon

Email: Michael.mcglashon@... <mailto:Michael.mcglashon@...>


Ph: 618 783 9331






--
"Life is like a piano.
White keys are happy moments
& Black keys are sad moments.
But remember both keys are played together to give sweet music."

"Focus on your abilities, not your disability."

Follow me on Facebook:
https://www.facebook.com/starhoze

Skype ID:
star.hoze

Warm Regards,
Hozefa...


moderated Re: jaws cutting in and out with air pods bluetooth headset

Don Mauck
 

If you’re using the Latest JAWS2020, you should be able to resolve this in the settings center (default)

Under the User settings there is an option to Avoid Speech  cutoff. It’s the ninth arrow down from the top.

 

 

Regards:

 

Don Mauck | Senior Accessibilityh Evangelist | Accessibility Program Office |  (APO)

 

303.334.4184

Don.mauck@...

 

From: mike mcglashon <michael.mcglashon@...>
Sent: Monday, June 22, 2020 10:07 AM
To: main@jfw.groups.io
Subject: jaws cutting in and out with air pods bluetooth headset

 

Hey guys:

I am test driving some airpods with bluetooth with dell computer, win10, and jaws 2020;

I notice that jaws cuts out, and when I hit insert-t or any jaws command,

The first part of what needs to be said is cut off;

Almost like there is some sort of delay that jaws goes through before speaking through the headset;

Is there anything I can do to fix this?

 

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 


moderated jaws cutting in and out with air pods bluetooth headset

mike mcglashon
 

Hey guys:

I am test driving some airpods with bluetooth with dell computer, win10, and jaws 2020;

I notice that jaws cuts out, and when I hit insert-t or any jaws command,

The first part of what needs to be said is cut off;

Almost like there is some sort of delay that jaws goes through before speaking through the headset;

Is there anything I can do to fix this?

 

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 


moderated Re: the first of 2 questions

Mike B
 


Hi Shirley,
 
Try the following to see if this'll help:
1. Open the Settings Center with, Insert + 6, on the number row, now press, control, shift + D, to open default all applications.
 
2. Down arrow to, Text processing closed right arrow to open.
 
3. Down arrow to, Proofing closed, right arrow to open.
 
4. Down arrow 1 time to, Detect spelling while navigating..., now press the
spacebar until Jaws reports, Off.
 
5. Tab to,apply, press the spacebar, tab to, Okay, press enter to save / close.
 
 
Take care.  Mike.  Sent from my iBarstool.
I don't know the key to success, but the key to failure is trying to please everybody.

----- Original Message -----
Sent: Monday, June 22, 2020 5:49 AM
Subject: Re: the first of 2 questions

Thanks, Chris, but it wasn’t doing it until the latest update of JAWS. I have checked the settings in Word, and they are the same as they have always been. Could the latest update for windows have effected this? I use Word 2016.

 

 

Shirley Tracy

 

From: Chris Hill
Sent: Monday, June 22, 2020 8:18 AM
To: main@jfw.groups.io
Subject: Re: the first of 2 questions

 

It isn't jaws doing that, word is doing that.  Open word, hit alt+f, arrow up to options and hit enter.  Arrow down to proofing and hit tab.  All the options are there.  You can decide what is auto-corrected, or turn it off altogether under auto correct options. 

 

 

On 6/22/2020 06:23, Shirley Tracy wrote:

Hi everyone,

 

How do I keep JAWS from automatically making corrections in Word? I don’t even know the corrections have been made, and sometimes a spelling word is not incorrect (such as an unusual spelling of a name).   

 

Shirley Tracy

 

 


moderated Re: web site having to enter password twice

Adrian Spratt
 

Try pressing JAWS key+escape after you enter the password the first time. doing so refreshes the JAWS view of the screen, and so JAWS is likely to detect that a password has been entered.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of kevin meyers
Sent: Monday, June 22, 2020 10:16 AM
To: main@jfw.groups.io
Subject: web site having to enter password twice

 

Hello, I’m using windows10 and most recent version of Jaws2020. When I go to my bank’s web site, I enter my user id and password. The screen comes back and I have to enter a second time. The first time I entered it and tab to logon. The next time I enter it I tab twice and it now says signon. There is no error message saying I entered the wrong user id or password. I made sure I typed in the correct user id and password. I had a friend do it with site and the same problem occurs. I should say the second time I enter it I get on to the site. I have cleaned out all browser data in chrome and then temp files/cookies. The bank say it is not their problem contact support for your laptop. If I want the place I purchased the laptop from, they want 7-10 days to look at it. That is not acceptable. Is it even a problem with my laptop? I can log on to any other site with no problem. The bank says I’m the only one that has this problem. Any thoughts of what I could do? Thanks, Kevin


moderated recommendation needed for accessible free email distribution allowing users to subscribe and unsubscribe newsletters like email chimp or constant contact

Sharon Ballantyne
 

Hi,

 

I am a oally blind user, with latest JAWS 2020 and Windows 10, using Microsoft Office 365. I want to change from aan email distribution list I have in my outlook contact to being able to  use a platform that is simple and easy to use for generating communication. Do you have any recommends such as email chimp or constant contact, or others?

 

Our website is being updated to a word press , do they have one that is built in?

Simple and accessible, able to embed links and photos and that sort of thing.

Thanks.

Sharon B


moderated Re: web site having to enter password twice

Chris
 

One thing to try would be another browser , to eliminate if chrome is the issue or not

 

 

From: kevin meyers
Sent: 22 June 2020 15:16
To: main@jfw.groups.io
Subject: web site having to enter password twice

 

Hello, I’m using windows10 and most recent version of Jaws2020. When I go to my bank’s web site, I enter my user id and password. The screen comes back and I have to enter a second time. The first time I entered it and tab to logon. The next time I enter it I tab twice and it now says signon. There is no error message saying I entered the wrong user id or password. I made sure I typed in the correct user id and password. I had a friend do it with site and the same problem occurs. I should say the second time I enter it I get on to the site. I have cleaned out all browser data in chrome and then temp files/cookies. The bank say it is not their problem contact support for your laptop. If I want the place I purchased the laptop from, they want 7-10 days to look at it. That is not acceptable. Is it even a problem with my laptop? I can log on to any other site with no problem. The bank says I’m the only one that has this problem. Any thoughts of what I could do? Thanks, Kevin