Date   

Re: Reversed Documents List

Mario
 

I don't think Shirley's problem is in Outlook, it sounds like it's in
File Explorer.

-------- Original Message --------
From: Brenda [mailto:bjnite@windstream.net]
Sent: Thursday, May 25, 2017 1:49 PM EST
To: main@jfw.groups.io
Subject: Reversed Documents List

Not sure of your email program, but in Thunderbird you go to view by
pressing ALT, arrow down to sort and then check or uncheck ascending or
descending. If you are using outlook, it is probably similar.

Brenda

On 5/25/2017 1:25 PM, Shirley Tracy wrote:
Help! I'm running Windows 7 and JAWS 18. Suddenly my "Documents" has
inverted--instead of running from the A's to the Z's, they list from
the Z's to the A's. It's not a big deal, but I'm not used to it and
would really like to get it back where it was. have no idea what made
it reverse.
Not sure if this is a JAWS issue or not, but I'd be grateful if
someone could tell me how to fix it since I'll need to use JAWS to do it.

Thank you in advance.

Shirley








.


Re: response time from Tech support at VFO

 

You can now reach tech support even through the toll free number, 1-800-444-4443 so why not call and talk to somebody in a few minutes.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Don H
Sent: Thursday, May 25, 2017 5:52 AM
To: main@jfw.groups.io
Subject: response time from Tech support at VFO

Any typical turn around time for getting answers from request for support from VFO? So far has been a week and have heard nothing other than a Email indicating they received my request for support.


Re: Problem Advancing Beyond First Page Of PDF Articles

Tom Behler
 

Yes, I did, with mixed rsults.

 

The files aren't the easiest to read, probably because of a multi-column format with many graphics intersperced throughout.

 

I also tried copying and pasting the material from Convenient OCR into a new Word document, but that too was only partially effective.  There were still lots of spaces between sections of the document, and I'm not sure all of the text was included or completely accessible.

 

Anyway, I think I'm going to have to settle for the best that Convenient OCR can do at this point, and call it good.

 

Tom Behler

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jonas Voll
Sent: Thursday, May 25, 2017 1:45 PM
To: main@jfw.groups.io
Subject: Re: Problem Advancing Beyond First Page Of PDF Articles

 

Did you try OCR?

 

 

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tony
Sent: Thursday, May 25, 2017 11:07 AM
To: main@jfw.groups.io
Subject: Re: Problem Advancing Beyond First Page Of PDF Articles

 

Try the view menu, there is a place there to move up, down by page or goto a page.  The shortcuts never work for me.

 

Tony

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Thursday, May 25, 2017 11:05 AM
To: main@jfw.groups.io
Subject: Problem Advancing Beyond First Page Of PDF Articles

 

Hello, everyone.

 

I am having a problem reading a few PDF articles I have just been sent.

 

Once I open the attachments, via Adobe Acrobat DC, I find that I cannot advance beyond the first page of each article, either via the arrow keys, or the page up and page down keys.

 

Interestingly, when I use my arrow keys and the page up or down keys, the visual sscreen advances with no problem.  In other words, Jaws appears to be  stuck on the first page and is unable to advance through the rest of the file.

 

I’m using Windows 7 and the latest build of Jaws 18 here, along with Adobe Acrobat DC.

 

Any suggestions would be apreciated.

 

Dr.  Tom Behler from Michigan

 

 

 

 
SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com 
and 
logon with your domain userid and password.
If you consider this email to be spam please forward it to 
'spam@...'

NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.

 


Re: repairing Jaws

James Homuth
 

Eh. Pretty sure the command line just invokes the same thing, just minus all
the confirmation dialogues, so I don't think that's it. I'd put money on
it's just cooler to use the command line.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lisle, Ted
(CHFS DMS)
Sent: May-25-17 2:45 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

Ain't that nice. Maybe that's why it's fallen out of favor.

Ted

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of James
Homuth
Sent: Thursday, May 25, 2017 2:37 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

Oh, it still has an actual repair option. There's a pretty little button for
it in the dialogue box and everything. It's just that that's all it does.
LOL

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lisle, Ted
(CHFS DMS)
Sent: May-25-17 2:34 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

It once had an actual repair option. I haven't had to run it for a while,
before the new method involving the command line came into vogue. But in
the day it worked.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of James
Homuth
Sent: Thursday, May 25, 2017 2:06 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

It's worth noting that the repair option really isn't much of a repair
option. All it does is remove JAWS and then reinstall it. Saves you a couple
extra steps, but if you've tried a manual reinstall before running the
repair, don't bother running the repair. And if you've already run the
repair and it didn't fix you, a manual reinstall probably won't either.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: May-25-17 1:58 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

you have some options when you choose to repair useing the jaws installer.
modify, remove or repair.
you need to have speech on to do this because the installer does not have
speech at this point.
but you can retain your settings or erase them to start over from scratch.
it will also ask you if you want to install more voices or brail support.

-----Original Message-----
From: Don H
Sent: Thursday, May 25, 2017 10:44 AM
To: main@jfw.groups.io
Subject: repairing Jaws

How do you repair Jaws? I assume you just run the installer package again
and at some point it offers a repair versus reinstall. Does a repair reset
all your settings?


Re: Problem Advancing Beyond First Page Of PDF Articles

Tom Behler
 

Ted:

 

I tried right clicking on the document to get to the context menu, but could find no option to open in word.

 

Am using Windows 7, Jaws 18, and Adobe Acrobat DC here.

 

Tom Behler

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lisle, Ted (CHFS DMS)
Sent: Thursday, May 25, 2017 12:15 PM
To: main@jfw.groups.io
Subject: Re: Problem Advancing Beyond First Page Of PDF Articles

 

I’ve seen that occasionally.  Can you import or open them in Word?  That should be possible.  Right clicking on the document should give you the option to open in Word.

 

Ted

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Tom Behler
Sent: Thursday, May 25, 2017 12:05 PM
To: main@jfw.groups.io
Subject: Problem Advancing Beyond First Page Of PDF Articles

 

Hello, everyone.

 

I am having a problem reading a few PDF articles I have just been sent.

 

Once I open the attachments, via Adobe Acrobat DC, I find that I cannot advance beyond the first page of each article, either via the arrow keys, or the page up and page down keys.

 

Interestingly, when I use my arrow keys and the page up or down keys, the visual sscreen advances with no problem.  In other words, Jaws appears to be  stuck on the first page and is unable to advance through the rest of the file.

 

I’m using Windows 7 and the latest build of Jaws 18 here, along with Adobe Acrobat DC.

 

Any suggestions would be apreciated.

 

Dr.  Tom Behler from Michigan

 

 

 


Re: Problem Advancing Beyond First Page Of PDF Articles

Tom Behler
 

Gerald:

 

I tried this, but even after selecting all of the document and copying into Notepad, I only got text from the first page.

 

Interestingly, when I tried Convenient OCR on the document, I did get what appeared to be the whole document, but there was lots of extra spacing between various sections of the document, probably due to a multi-column format and numerous graphics intersperced throughout the article.

 

Tom Behler

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Gerald Levy
Sent: Thursday, May 25, 2017 12:17 PM
To: main@jfw.groups.io
Subject: Re: Problem Advancing Beyond First Page Of PDF Articles

 

 

Sometimes, when I encounter this problem, I perform a select all command (Control-A) to select all the text in the PDF document and then copy and paste it into Notepad.  Most of the time, I can then read the entire document using the arroe keys.

 

Gerald

 

 

 

From: Tom Behler

Sent: Thursday, May 25, 2017 12:04 PM

Subject: Problem Advancing Beyond First Page Of PDF Articles

 

Hello, everyone.

 

I am having a problem reading a few PDF articles I have just been sent.

 

Once I open the attachments, via Adobe Acrobat DC, I find that I cannot advance beyond the first page of each article, either via the arrow keys, or the page up and page down keys.

 

Interestingly, when I use my arrow keys and the page up or down keys, the visual sscreen advances with no problem.  In other words, Jaws appears to be  stuck on the first page and is unable to advance through the rest of the file.

 

I’m using Windows 7 and the latest build of Jaws 18 here, along with Adobe Acrobat DC.

 

Any suggestions would be apreciated.

 

Dr.  Tom Behler from Michigan

 

 

 


Re: repairing Jaws

Lisle, Ted (CHFS DMS)
 

Ain't that nice. Maybe that's why it's fallen out of favor.

Ted

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of James Homuth
Sent: Thursday, May 25, 2017 2:37 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

Oh, it still has an actual repair option. There's a pretty little button for
it in the dialogue box and everything. It's just that that's all it does.
LOL

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lisle, Ted
(CHFS DMS)
Sent: May-25-17 2:34 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

It once had an actual repair option. I haven't had to run it for a while,
before the new method involving the command line came into vogue. But in
the day it worked.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of James
Homuth
Sent: Thursday, May 25, 2017 2:06 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

It's worth noting that the repair option really isn't much of a repair
option. All it does is remove JAWS and then reinstall it. Saves you a couple
extra steps, but if you've tried a manual reinstall before running the
repair, don't bother running the repair. And if you've already run the
repair and it didn't fix you, a manual reinstall probably won't either.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: May-25-17 1:58 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

you have some options when you choose to repair useing the jaws installer.
modify, remove or repair.
you need to have speech on to do this because the installer does not have
speech at this point.
but you can retain your settings or erase them to start over from scratch.
it will also ask you if you want to install more voices or brail support.

-----Original Message-----
From: Don H
Sent: Thursday, May 25, 2017 10:44 AM
To: main@jfw.groups.io
Subject: repairing Jaws

How do you repair Jaws? I assume you just run the installer package again
and at some point it offers a repair versus reinstall. Does a repair reset
all your settings?


Re: repairing Jaws

James Homuth
 

Oh, it still has an actual repair option. There's a pretty little button for
it in the dialogue box and everything. It's just that that's all it does.
LOL

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Lisle, Ted
(CHFS DMS)
Sent: May-25-17 2:34 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

It once had an actual repair option. I haven't had to run it for a while,
before the new method involving the command line came into vogue. But in
the day it worked.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of James
Homuth
Sent: Thursday, May 25, 2017 2:06 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

It's worth noting that the repair option really isn't much of a repair
option. All it does is remove JAWS and then reinstall it. Saves you a couple
extra steps, but if you've tried a manual reinstall before running the
repair, don't bother running the repair. And if you've already run the
repair and it didn't fix you, a manual reinstall probably won't either.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: May-25-17 1:58 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

you have some options when you choose to repair useing the jaws installer.
modify, remove or repair.
you need to have speech on to do this because the installer does not have
speech at this point.
but you can retain your settings or erase them to start over from scratch.
it will also ask you if you want to install more voices or brail support.

-----Original Message-----
From: Don H
Sent: Thursday, May 25, 2017 10:44 AM
To: main@jfw.groups.io
Subject: repairing Jaws

How do you repair Jaws? I assume you just run the installer package again
and at some point it offers a repair versus reinstall. Does a repair reset
all your settings?


Re: status line

Lisle, Ted (CHFS DMS)
 

What status line?

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of judith bron
Sent: Thursday, May 25, 2017 2:23 PM
To: main@jfw.groups.io
Subject: status line

 

How do I  insert the status line using jaws 16?  ThanksaAZ, Judith


Re: repairing Jaws

Lisle, Ted (CHFS DMS)
 

It once had an actual repair option. I haven't had to run it for a while, before the new method involving the command line came into vogue. But in the day it worked.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of James Homuth
Sent: Thursday, May 25, 2017 2:06 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

It's worth noting that the repair option really isn't much of a repair
option. All it does is remove JAWS and then reinstall it. Saves you a couple
extra steps, but if you've tried a manual reinstall before running the
repair, don't bother running the repair. And if you've already run the
repair and it didn't fix you, a manual reinstall probably won't either.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: May-25-17 1:58 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

you have some options when you choose to repair useing the jaws installer.
modify, remove or repair.
you need to have speech on to do this because the installer does not have
speech at this point.
but you can retain your settings or erase them to start over from scratch.
it will also ask you if you want to install more voices or brail support.

-----Original Message-----
From: Don H
Sent: Thursday, May 25, 2017 10:44 AM
To: main@jfw.groups.io
Subject: repairing Jaws

How do you repair Jaws? I assume you just run the installer package again
and at some point it offers a repair versus reinstall. Does a repair reset
all your settings?


status line

judith bron
 

How do I  insert the status line using jaws 16?  ThanksaAZ, Judith


Re: graphics in wlm 2012

Dave...
 

Again, the graphics are likely changing ever so slightly, and thus making
your labels useless.

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "netbat66" <netbat66@gmail.com>
To: <main@jfw.groups.io>
Sent: Thursday, May 25, 2017 11:02
Subject: Re: graphics in wlm 2012


i am useing the one line view. i also tried screen refresh, which made no
difference.

-----Original Message-----
From: Dave...
Sent: Thursday, May 25, 2017 10:50 AM
To: main@jfw.groups.io
Subject: Re: graphics in wlm 2012

It's entirely possible that the graphics change, depending on the view
you're in, or whether they are highlighted, or adjacent to other graphics.
Simply the graphic changing color slightly could cause it to not match your
labeled graphic. I gave up trying to label graphics, since it takes a lot of
work, and often they change for very innocuous reasons.

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer


----- Original Message -----
From: "netbat66" <netbat66@gmail.com>
To: <main@jfw.groups.io>
Sent: Thursday, May 25, 2017 10:15
Subject: graphics in wlm 2012


is this a bug?
i have labeled most of the status graphics. like the read and unread, thread
opened and closed.
but after i read a message the graphic will not say read until i alt tab
away
and back to wlm then these graphics will read properly.
until i alt tab out and back in none of the read message graphics will speak
after opening only 1 message.


There's amazing intelligence in the Universe.
You can tell because none of them ever called Earth.


Re: Quicken

Ted Drake
 

Hi All
I manage accessibility at Intuit, so I can help with clarifying the current situation.

Quicken was Intuit's original product and helps people manage their budgets, investments, and balancing their accounts. QuickBooks is the product for small businesses. It manages accounting, sales, invoices, employees, payroll, and taxes.

Intuit spun off Quicken last year; it now runs as its own company. Intuit's management felt like Quicken was no longer fitting into our core strategy and it would have a stronger future as a standalone product.  Quicken has kept the majority of its engineers and most importantly their lead accessibility manager. Quicken made a change several years ago to modernize the operating system and accidentally made accessibility worse. We gathered a group of blind customers to beta test fixes and began a concentrated effort to restore keyboard and improve label accessibility.

The  Intuit/Quicken separation process took a while, but their team is back to working on accessibility and product quality. I still keep in touch with their team and have great confidence in their commitment to accessibility.

Quicken should work a bit better with JAWS than Window-Eyes. We discovered an old script was bundled with the JAWS product. We made some improvements  a couple years ago to provide some additional labels for controls. This script is free and you shouldn't need to download anything.

You can find more information about Quicken at https://www.quicken.com/


For basic budgeting and categorization, you could also try Mint. This is the free product from Intuit. It's a web and mobile product that does much of what Quicken covers. Mint doesn't provide Quicken's deeper reports and insights. It does have a method to pay bills. Mint's mobile apps provide a more accessible experience than the web site, but we are continually making improvements to all platforms.  You can find more information at http://mint.intuit.com

QuickBooks isn't the product for you.

I always welcome feedback on the accessibility of our products. Our product teams value customer insights.

Thank you Les for your your response.

Ted Drake, Intuit Accessibility
ted_drake@...


Re: repairing Jaws

James Homuth
 

It's worth noting that the repair option really isn't much of a repair
option. All it does is remove JAWS and then reinstall it. Saves you a couple
extra steps, but if you've tried a manual reinstall before running the
repair, don't bother running the repair. And if you've already run the
repair and it didn't fix you, a manual reinstall probably won't either.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of netbat66
Sent: May-25-17 1:58 PM
To: main@jfw.groups.io
Subject: Re: repairing Jaws

you have some options when you choose to repair useing the jaws installer.
modify, remove or repair.
you need to have speech on to do this because the installer does not have
speech at this point.
but you can retain your settings or erase them to start over from scratch.
it will also ask you if you want to install more voices or brail support.

-----Original Message-----
From: Don H
Sent: Thursday, May 25, 2017 10:44 AM
To: main@jfw.groups.io
Subject: repairing Jaws

How do you repair Jaws? I assume you just run the installer package again
and at some point it offers a repair versus reinstall. Does a repair reset
all your settings?


Re: graphics in wlm 2012

netbat66
 

i am useing the one line view. i also tried screen refresh, which made no difference.

-----Original Message-----
From: Dave...
Sent: Thursday, May 25, 2017 10:50 AM
To: main@jfw.groups.io
Subject: Re: graphics in wlm 2012

It's entirely possible that the graphics change, depending on the view
you're in, or whether they are highlighted, or adjacent to other graphics.
Simply the graphic changing color slightly could cause it to not match your
labeled graphic. I gave up trying to label graphics, since it takes a lot of
work, and often they change for very innocuous reasons.

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer


----- Original Message -----
From: "netbat66" <netbat66@gmail.com>
To: <main@jfw.groups.io>
Sent: Thursday, May 25, 2017 10:15
Subject: graphics in wlm 2012


is this a bug?
i have labeled most of the status graphics. like the read and unread, thread
opened and closed.
but after i read a message the graphic will not say read until i alt tab
away
and back to wlm then these graphics will read properly.
until i alt tab out and back in none of the read message graphics will speak
after opening only 1 message.


There's amazing intelligence in the Universe.
You can tell because none of them ever called Earth.


Re: Reversed Documents List

Shirley Tracy
 

Thank you so much. So simple, but I didn't know.
Shirley Tracy
author
OPERATION CODE CHARLIE
now available at major book sellers

---- "Carol Smith via Groups.Io" <carollablady=aol.com@groups.io> wrote:

=============
While in your list of files, press alt-v (view menu)
Press o for sort order
Press enter on name.
This will return the files to the original sort order.

Carol

On 5/25/2017 1:25 PM, Shirley Tracy wrote:
Help! I'm running Windows 7 and JAWS 18. Suddenly my "Documents" has inverted--instead of running from the A's to the Z's, they list from the Z's to the A's. It's not a big deal, but I'm not used to it and would really like to get it back where it was. have no idea what made it reverse.
Not sure if this is a JAWS issue or not, but I'd be grateful if someone could tell me how to fix it since I'll need to use JAWS to do it.

Thank you in advance.

Shirley





Re: repairing Jaws

netbat66
 

you have some options when you choose to repair useing the jaws installer.
modify, remove or repair.
you need to have speech on to do this because the installer does not have speech at this point.
but you can retain your settings or erase them to start over from scratch.
it will also ask you if you want to install more voices or brail support.

-----Original Message-----
From: Don H
Sent: Thursday, May 25, 2017 10:44 AM
To: main@jfw.groups.io
Subject: repairing Jaws

How do you repair Jaws? I assume you just run the installer package
again and at some point it offers a repair versus reinstall. Does a
repair reset all your settings?


Re: Reversed Documents List

Dave...
 

What list of documents are you referring to? What program is listing them?

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "Shirley Tracy" <stracy5@tampabay.rr.com>
To: <main@jfw.groups.io>
Sent: Thursday, May 25, 2017 10:25
Subject: Reversed Documents List


Help! I'm running Windows 7 and JAWS 18. Suddenly my "Documents" has
inverted--instead of running from the A's to the Z's, they list from the Z's
to the A's. It's not a big deal, but I'm not used to it and would really
like to get it back where it was. have no idea what made it reverse.
Not sure if this is a JAWS issue or not, but I'd be grateful if someone
could tell me how to fix it since I'll need to use JAWS to do it.

Thank you in advance.

Shirley


Re: Reversed Documents List

Carol Smith
 

While in your list of files, press alt-v (view menu)
Press o for sort order
Press enter on name.
This will return the files to the original sort order.

Carol

On 5/25/2017 1:25 PM, Shirley Tracy wrote:
Help! I'm running Windows 7 and JAWS 18. Suddenly my "Documents" has inverted--instead of running from the A's to the Z's, they list from the Z's to the A's. It's not a big deal, but I'm not used to it and would really like to get it back where it was. have no idea what made it reverse.
Not sure if this is a JAWS issue or not, but I'd be grateful if someone could tell me how to fix it since I'll need to use JAWS to do it.

Thank you in advance.

Shirley




Re: repairing Jaws

Dave...
 

Yes, and no it does not require you to remove your settings.

Dave
Oregonian, woodworker, Engineer, Musician, and Pioneer

----- Original Message -----
From: "Don H" <lmddh50@comcast.net>
To: <main@jfw.groups.io>
Sent: Thursday, May 25, 2017 10:44
Subject: repairing Jaws


How do you repair Jaws? I assume you just run the installer package
again and at some point it offers a repair versus reinstall. Does a
repair reset all your settings?