Date   

Re: Need help with using jaws on microsoft online package

Russell Solowoniuk
 

Hi,

Here are the instructions.
If the following websites instructions don’t work by changing it in the settings, then try the below directions:
Proper way, via settings:
 
Another site:
 
Manual method:
After signing in by whatever method (probably outlook.yourinstitution.com), look at the address bar, it will probably start with something like the following: https://outlook.office365.com/owa/?blahblahblah
Just go and delete the blahblahblah part, and put in layout=light, so the new address would be https://outlook.office365.com/owa/?layout=light

HTH

Russell

On Jun 12, 2017, at 2:44 PM, Adekoya Rasak <rasakadekoya@...> wrote:

hello.
How do I change to the like version.
Please guide me on this.

On 12/06/2017, Russell Solowoniuk <rsolowoniuk@...> wrote:
Hi,

Yes, I can second the advice to switch to the Light version of Outlook web
access. My workplace also just moved from Groupwise to Outlook last week,
and thankfully a friend had told me earlier about the Outlook Light version.
It works great.

Good luck.

Russell
On Jun 12, 2017, at 11:16 AM, Jim Fettgather <jimfettgather@...>
wrote:

Hello, I have found that by far, the most helpful and important option
to change is in Options, outlook version, and to use the lite mode.
Then, you are not presented with Tree Views which are highly difficult
to navigate, but a more typical interface, very similar to Gmail's
Basic HTML version, all check boxes and links are very clearly
labeled, and Outlook on the web in lite mode is very useable.
Thanks.



On 6/12/17, Adekoya Rasak <rasakadekoya@...> wrote:
hello All,

My office just switch to office 365 and I need to know how to access
my company email using microsoftonline.com to access my email in the
situation when I am not at office. I login to the page and signed in
successfully but I have challenge navigating the web page.
I will be usinng the web app soon but not yet.
any help guys. any one with experience on this.

Regard.

--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@...
Skype: Asiwaju.rasak29














--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@...
Skype: Asiwaju.rasak29





Touch cursor and weather

Portia Mason
 

Hello and good morning. I am inquiring is anyone here uses the touch cursor and knows how to navigate it well? I am a new user of the touch cursor and it seems a little difficult. I have no problem on my mobile device but on my laptop is a different story. I want to set my weather's location but is this the only way I can do this by using the touch cursor?
Portia


Re: New Folder

Lisle, Ted (CHFS DMS)
 

I thought I tried that, but I was getting rather tired. Thanks again.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Vic Beckley
Sent: Tuesday, June 13, 2017 8:27 AM
To: main@jfw.groups.io
Subject: Re: New Folder

Yes that will work if you have already created the folder. To avoid this
step, you can name the folder when you create it. When you first create the
folder, the folder name "New Folder" is selected and you can type right over
it. Once you type the new name just press enter.


Best Regards From Ohio,

Vic


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John
Covici
Sent: Tuesday, June 13, 2017 7:54 AM
To: main@jfw.groups.io
Subject: Re: New Folder

Just hit the f2 key and edit the name.

On Tue, 13 Jun 2017 07:51:53 -0400,
Lisle, Ted (CHFS DMS) wrote:

[1 <text/plain; us-ascii (quoted-printable)>]
[2 <text/html; us-ascii (quoted-printable)>]
I'm sure you're all familiar with the "New" menu in Win 7 and probably
later. one of the options is Create New Folder―so far so good. But once you
create it, how do you name or rename it? who the heck wants a dumb name like
"New Folder?"
I'd like the name to reflect the purpose for which I created it―hardly
original.

Ted

Ted Lisle, PH .D. medicaid Spec 3, (502)564-2574

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: New Folder

Vic Beckley
 

Yes that will work if you have already created the folder. To avoid this
step, you can name the folder when you create it. When you first create the
folder, the folder name "New Folder" is selected and you can type right over
it. Once you type the new name just press enter.


Best Regards From Ohio,

Vic

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John
Covici
Sent: Tuesday, June 13, 2017 7:54 AM
To: main@jfw.groups.io
Subject: Re: New Folder

Just hit the f2 key and edit the name.

On Tue, 13 Jun 2017 07:51:53 -0400,
Lisle, Ted (CHFS DMS) wrote:

[1 <text/plain; us-ascii (quoted-printable)>]
[2 <text/html; us-ascii (quoted-printable)>]
I'm sure you're all familiar with the "New" menu in Win 7 and probably
later. one of the options is Create New Folder―so far so good. But once you
create it, how do you name or rename it? who the heck wants a dumb name like
"New Folder?"
I'd like the name to reflect the purpose for which I created it―hardly
original.

Ted

Ted Lisle, PH .D. medicaid Spec 3, (502)564-2574

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: redundant backup options accessibility with JAWS18

Jonas Voll
 

I found out port 5000 is blockt!


Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for the blind and visually impaired through employment, outreach, rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shai
Sent: Monday, June 12, 2017 4:35 PM
To: main@jfw.groups.io
Subject: Re: redundant backup options accessibility with JAWS18

Hello Jonas,
I am confused by your question. I went to the site and pressed enter on the link that states dsm live demo. Further down the site they have an item on their page which states try it now for free! I pressed enter on this and then after about a second or so, the demo opened automatically.
Hope that helps


On 6/12/17, Jonas Voll <jonas.voll@envisionus.com> wrote:
Hey, Shai !
How did you get the Synology demo Working?

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for
the blind and visually impaired through employment, outreach,
rehabilitation, education and research.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shai
Sent: Sunday, June 11, 2017 2:14 PM
To: main@jfw.groups.io
Subject: redundant backup options accessibility with JAWS18

Hello,
I am looking for a redundant backup option either hard drive NAS or
cloud-based that is accessible with JAWS18 and works with Windows10.
What are people's recommendations? Such a service should not take up
space on the computer for backup. I have tried Crashplan and Carbonite
but I found that I am only able to initiate the backup but not restore
files. I have also tried the Synology demo and it seems accessible,
but I would want to hear people's experiences to confirm this.
Thank you in advance for any responses




SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com and logon
with your domain userid and password.
If you consider this email to be spam please forward it to
'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are
confidential. The information is exclusively for the use of the
individual or entity intended as the recipient. If you are not the
intended recipient, any use, copying, printing, reviewing, retention,
disclosure, distribution or forwarding of the message or any attached
file is not authorized and is strictly prohibited. If you have
received this electronic mail message in error, please advise the
sender by reply electronic mail immediately and permanently delete the
original transmission, any attachments and any copies of this message from your computer system.





NOTICE: This electronic mail message and any attached files are confidential. The information is exclusively for the use of the individual or entity intended as the recipient. If you are not the intended recipient, any use, copying, printing, reviewing, retention, disclosure, distribution or forwarding of the message or any attached file is not authorized and is strictly prohibited. If you have received this electronic mail message in error, please advise the sender by reply electronic mail immediately and permanently delete the original transmission, any attachments and any copies of this message from your computer system.


Re: New Folder

Lisle, Ted (CHFS DMS)
 

That oughta work; I'll try it. thanks.

Ted

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of John Covici
Sent: Tuesday, June 13, 2017 7:54 AM
To: main@jfw.groups.io
Subject: Re: New Folder

Just hit the f2 key and edit the name.

On Tue, 13 Jun 2017 07:51:53 -0400,
Lisle, Ted (CHFS DMS) wrote:

[1 <text/plain; us-ascii (quoted-printable)>]
[2 <text/html; us-ascii (quoted-printable)>]
I'm sure you're all familiar with the "New" menu in Win 7 and probably later. one of the options is Create New Folder―so far so good. But once you create it, how do you name or rename it? who the heck wants a dumb name like "New Folder?"
I'd like the name to reflect the purpose for which I created it―hardly original.

Ted

Ted Lisle, PH .D. medicaid Spec 3, (502)564-2574

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


Re: New Folder

John Covici
 

Just hit the f2 key and edit the name.

On Tue, 13 Jun 2017 07:51:53 -0400,
Lisle, Ted (CHFS DMS) wrote:

[1 <text/plain; us-ascii (quoted-printable)>]
[2 <text/html; us-ascii (quoted-printable)>]
I’m sure you’re all familiar with the “New” menu in Win 7 and probably later. one of the options is Create New Folder―so far so good. But once you create it, how do you name or rename it? who the heck wants a dumb name like “New Folder?”
I’d like the name to reflect the purpose for which I created it―hardly original.

Ted

Ted Lisle, PH .D. medicaid Spec 3, (502)564-2574

--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?

John Covici
covici@ccs.covici.com


New Folder

Lisle, Ted (CHFS DMS)
 

I’m sure you’re all familiar with the “New” menu in Win 7 and probably later.  one of the options is Create New Folder—so far so good.  But once you create it, how do you name or rename it?  who the heck wants a dumb name like “New Folder?” I’d like the name to reflect the purpose for which I created it—hardly original.

 

Ted

 

Ted Lisle, PH .D. medicaid Spec 3, (502)564-2574

 


How do I enable cookies in firefox?

Kimber Gardner
 

Hi all,

I just started using Firefox and I'm struggling a little bit. For
example, when I try to access my gmail accounts I get a message that I
need to enable cookies in firefox, but I can't figure out how to do
that. Also, I'd be glad for any general tips or helpful resources that
will make my transition smoother.

Thanks,
Kim

--
Kimberly


Re: Need help with using jaws on microsoft online package

Adekoya Rasak
 

Hello Jim,

thank you for this. I tried to login using microsoftonline.com as we
are told in office to do. but I can find any link for settings. Is it
a button or how is it tag?

Please, kindly guide me on this.

Regard.

On 13/06/2017, Sieghard Weitzel <sieghard@live.ca> wrote:
Hi Jim,

Thanks a lot for this, at first I tried to find this with Chrome and could
not, I then tried IE and was able to change it. I am so glad you explained
this because this used to be how my Outlook on the web looked like and then
it changed and I found it very unusable. I haven't tried the light version
with Chrome, but on the regular version Chrome does not read any messages at
all, visually they are there, but Chrome will skip right over the entire
message list.
This is the same when I log into my Bank of Montreal Mastercard account
using Chrome. Jaws reads none of the transaction details, it will read the
column headers like transaction date, date posted, description and the
amount, but no details. If I log in with Internet Explorer all the
transactions are read just fine, I can use table navigation and it works
beautifully. I should mention that I asked one of my employees to look and
visually all the details are there as are the email messages, but there is
something seriously wrong with Chrome on these sites. It really is too bad
since otherwise I find Chrome is very accessible and much faster than IE.
Now I wishMicrosoft would do something about Outlook.com which I use for my
personal email.

Regards,
Sieghard


-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jim
Fettgather
Sent: Monday, June 12, 2017 2:09 PM
To: main@jfw.groups.io
Subject: Re: Need help with using jaws on microsoft online package

I hope that it is possible for you to follow these directions.
Since I am already using the lite version, I was not able to give you
complete instructions using the keyboard, but this may be enough info to get
you started.


Outlook Web App is a fantastic web-based email client for Exchange Online.
It's almost as full-featured as the desktop version, allows offline mail
access, and provides a high level of customization.

It is, however, somewhat bandwidth-hungry. To help with this issue, and also
address older browser needs and provide some accessibility features, the
full-featured version of OWA can be switched to a 'light-weight' classic
version of OWA. To do so, follow these steps:

Sign in to OWA, and click on the settings gear in the upper right to get to
the menu. Then click on Options:

In the Options screen, click on General and then Outlook on the web
version:

Now check the Use the light version of Outlook on the web, and then click on
SAVE:

Note that you will need to sign out and sign back in to see your changes. To
sign out, click on the icon/avatar (or picture, if you've set one!) in the
upper right of the browser, and choose "Sign out".


I hope this may be helpful.


On 6/12/17, Adekoya Rasak <rasakadekoya@gmail.com> wrote:
hello.
How do I change to the like version.
Please guide me on this.

On 12/06/2017, Russell Solowoniuk <rsolowoniuk@gmail.com> wrote:
Hi,

Yes, I can second the advice to switch to the Light version of
Outlook web access. My workplace also just moved from Groupwise to
Outlook last week, and thankfully a friend had told me earlier about
the Outlook Light version.
It works great.

Good luck.

Russell
On Jun 12, 2017, at 11:16 AM, Jim Fettgather
<jimfettgather@gmail.com>
wrote:

Hello, I have found that by far, the most helpful and important
option to change is in Options, outlook version, and to use the lite
mode.
Then, you are not presented with Tree Views which are highly
difficult to navigate, but a more typical interface, very similar to
Gmail's Basic HTML version, all check boxes and links are very
clearly labeled, and Outlook on the web in lite mode is very useable.
Thanks.



On 6/12/17, Adekoya Rasak <rasakadekoya@gmail.com> wrote:
hello All,

My office just switch to office 365 and I need to know how to
access my company email using microsoftonline.com to access my
email in the situation when I am not at office. I login to the page
and signed in successfully but I have challenge navigating the web
page.
I will be usinng the web app soon but not yet.
any help guys. any one with experience on this.

Regard.

--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@kemonics.com
Skype: Asiwaju.rasak29








--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@kemonics.com
Skype: Asiwaju.rasak29








--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@kemonics.com
Skype: Asiwaju.rasak29


Re: Need help with using jaws on microsoft online package

 

Hi Jim,

Thanks a lot for this, at first I tried to find this with Chrome and could not, I then tried IE and was able to change it. I am so glad you explained this because this used to be how my Outlook on the web looked like and then it changed and I found it very unusable. I haven't tried the light version with Chrome, but on the regular version Chrome does not read any messages at all, visually they are there, but Chrome will skip right over the entire message list.
This is the same when I log into my Bank of Montreal Mastercard account using Chrome. Jaws reads none of the transaction details, it will read the column headers like transaction date, date posted, description and the amount, but no details. If I log in with Internet Explorer all the transactions are read just fine, I can use table navigation and it works beautifully. I should mention that I asked one of my employees to look and visually all the details are there as are the email messages, but there is something seriously wrong with Chrome on these sites. It really is too bad since otherwise I find Chrome is very accessible and much faster than IE.
Now I wishMicrosoft would do something about Outlook.com which I use for my personal email.

Regards,
Sieghard

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Jim Fettgather
Sent: Monday, June 12, 2017 2:09 PM
To: main@jfw.groups.io
Subject: Re: Need help with using jaws on microsoft online package

I hope that it is possible for you to follow these directions.
Since I am already using the lite version, I was not able to give you complete instructions using the keyboard, but this may be enough info to get you started.


Outlook Web App is a fantastic web-based email client for Exchange Online. It's almost as full-featured as the desktop version, allows offline mail access, and provides a high level of customization.

It is, however, somewhat bandwidth-hungry. To help with this issue, and also address older browser needs and provide some accessibility features, the full-featured version of OWA can be switched to a 'light-weight' classic version of OWA. To do so, follow these steps:

Sign in to OWA, and click on the settings gear in the upper right to get to the menu. Then click on Options:

In the Options screen, click on General and then Outlook on the web version:

Now check the Use the light version of Outlook on the web, and then click on SAVE:

Note that you will need to sign out and sign back in to see your changes. To sign out, click on the icon/avatar (or picture, if you've set one!) in the upper right of the browser, and choose "Sign out".


I hope this may be helpful.


On 6/12/17, Adekoya Rasak <rasakadekoya@gmail.com> wrote:
hello.
How do I change to the like version.
Please guide me on this.

On 12/06/2017, Russell Solowoniuk <rsolowoniuk@gmail.com> wrote:
Hi,

Yes, I can second the advice to switch to the Light version of
Outlook web access. My workplace also just moved from Groupwise to
Outlook last week, and thankfully a friend had told me earlier about
the Outlook Light version.
It works great.

Good luck.

Russell
On Jun 12, 2017, at 11:16 AM, Jim Fettgather
<jimfettgather@gmail.com>
wrote:

Hello, I have found that by far, the most helpful and important
option to change is in Options, outlook version, and to use the lite mode.
Then, you are not presented with Tree Views which are highly
difficult to navigate, but a more typical interface, very similar to
Gmail's Basic HTML version, all check boxes and links are very
clearly labeled, and Outlook on the web in lite mode is very useable.
Thanks.



On 6/12/17, Adekoya Rasak <rasakadekoya@gmail.com> wrote:
hello All,

My office just switch to office 365 and I need to know how to
access my company email using microsoftonline.com to access my
email in the situation when I am not at office. I login to the page
and signed in successfully but I have challenge navigating the web page.
I will be usinng the web app soon but not yet.
any help guys. any one with experience on this.

Regard.

--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@kemonics.com
Skype: Asiwaju.rasak29








--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@kemonics.com
Skype: Asiwaju.rasak29




Re: free web services

David & his pack of dogs
 

You should be able to use a pre-paid credit card such as Mastercard or Visa.  I have used these with Best buy and Go-daddy. 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of marvin hunkin
Sent: June 12, 2017 6:06 PM
To: main@jfw.groups.io
Subject: free web services

 

Hi. I use jaws and doing a diploma of information technology from http://www.upskilled.edu.au and using http://www.pluralsight.com for my course. Now doing a couple of subjects about web services. My issue is, I don’t have a credit card and to get the free webservices via Microsoft windows azure, or amazon web services. So, any ideas, does any one know of any other webservice coloud platforms that doesn’t require a credit card.

Any ideas.

My lecturer Darrell Klar is trying to look, but I thought I would ask, as some one asked about creating a web site on word press.

If this topic is not on topic, then e-mail me privately off list.

Thanks.

Marvin.


Re: free web services

Richard Turner
 


I was not clear what you are looking for. Do you want free web hosting or free cloud storage?
If web site hosting, I use x10webhosting.com

Free cloud storage, there is oneDrive, Dropbox, and pCloud.
HTH,
Richard



(Sent from the iPod Touch 6)

On Jun 12, 2017, at 7:51 PM, Shai <shaiwol@...> wrote:

Hi,
I have not looked at the services you mentioned, but I use to use a
free website provider called tripod at tripod.com. You might also look
at Google sites although I am not sure how accessible it might be with
JAWS.


On 6/12/17, marvin hunkin <startrekcafe@...> wrote:
Hi. I use jaws and doing a diploma of information technology from
http://www.upskilled.edu.au and using http://www.pluralsight.com for my
course. Now doing a couple of subjects about web services. My issue is, I
don't have a credit card and to get the free webservices via Microsoft
windows azure, or amazon web services. So, any ideas, does any one know of
any other webservice coloud platforms that doesn't require a credit card.

Any ideas.

My lecturer Darrell Klar is trying to look, but I thought I would ask, as
some one asked about creating a web site on word press.

If this topic is not on topic, then e-mail me privately off list.

Thanks.

Marvin.






Re: free web services

Shai
 

Hi,
I have not looked at the services you mentioned, but I use to use a
free website provider called tripod at tripod.com. You might also look
at Google sites although I am not sure how accessible it might be with
JAWS.

On 6/12/17, marvin hunkin <startrekcafe@gmail.com> wrote:
Hi. I use jaws and doing a diploma of information technology from
http://www.upskilled.edu.au and using http://www.pluralsight.com for my
course. Now doing a couple of subjects about web services. My issue is, I
don't have a credit card and to get the free webservices via Microsoft
windows azure, or amazon web services. So, any ideas, does any one know of
any other webservice coloud platforms that doesn't require a credit card.

Any ideas.

My lecturer Darrell Klar is trying to look, but I thought I would ask, as
some one asked about creating a web site on word press.

If this topic is not on topic, then e-mail me privately off list.

Thanks.

Marvin.


free web services

marvin hunkin <startrekcafe@...>
 

Hi. I use jaws and doing a diploma of information technology from http://www.upskilled.edu.au and using http://www.pluralsight.com for my course. Now doing a couple of subjects about web services. My issue is, I don’t have a credit card and to get the free webservices via Microsoft windows azure, or amazon web services. So, any ideas, does any one know of any other webservice coloud platforms that doesn’t require a credit card.

Any ideas.

My lecturer Darrell Klar is trying to look, but I thought I would ask, as some one asked about creating a web site on word press.

If this topic is not on topic, then e-mail me privately off list.

Thanks.

Marvin.


Re: Need help with using jaws on microsoft online package

Jim Fettgather
 

I hope that it is possible for you to follow these directions.
Since I am already using the lite version, I was not able to give you
complete instructions using the keyboard, but this may be enough info
to get you started.


Outlook Web App is a fantastic web-based email client for Exchange
Online. It's almost as full-featured as the desktop version, allows
offline mail access,
and provides a high level of customization.

It is, however, somewhat bandwidth-hungry. To help with this issue,
and also address older browser needs and provide some accessibility
features, the full-featured
version of OWA can be switched to a 'light-weight' classic version of
OWA. To do so, follow these steps:

Sign in to OWA, and click on the settings gear in the upper right to
get to the menu. Then click on Options:

In the Options screen, click on General and then Outlook on the web version:

Now check the Use the light version of Outlook on the web, and then
click on SAVE:

Note that you will need to sign out and sign back in to see your
changes. To sign out, click on the icon/avatar (or picture, if you've
set one!) in the
upper right of the browser, and choose "Sign out".


I hope this may be helpful.

On 6/12/17, Adekoya Rasak <rasakadekoya@gmail.com> wrote:
hello.
How do I change to the like version.
Please guide me on this.

On 12/06/2017, Russell Solowoniuk <rsolowoniuk@gmail.com> wrote:
Hi,

Yes, I can second the advice to switch to the Light version of Outlook
web
access. My workplace also just moved from Groupwise to Outlook last week,
and thankfully a friend had told me earlier about the Outlook Light
version.
It works great.

Good luck.

Russell
On Jun 12, 2017, at 11:16 AM, Jim Fettgather <jimfettgather@gmail.com>
wrote:

Hello, I have found that by far, the most helpful and important option
to change is in Options, outlook version, and to use the lite mode.
Then, you are not presented with Tree Views which are highly difficult
to navigate, but a more typical interface, very similar to Gmail's
Basic HTML version, all check boxes and links are very clearly
labeled, and Outlook on the web in lite mode is very useable.
Thanks.



On 6/12/17, Adekoya Rasak <rasakadekoya@gmail.com> wrote:
hello All,

My office just switch to office 365 and I need to know how to access
my company email using microsoftonline.com to access my email in the
situation when I am not at office. I login to the page and signed in
successfully but I have challenge navigating the web page.
I will be usinng the web app soon but not yet.
any help guys. any one with experience on this.

Regard.

--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@kemonics.com
Skype: Asiwaju.rasak29








--
Rasak Adekoya
|Public Awareness and Communications Manager
USAID Civil Society Project (SACE)

17, Euphrates Street, Maitama, Abuja

T: +2348034829045, +2348090359417
E: radekoya@kemonics.com
Skype: Asiwaju.rasak29




Re: redundant backup options accessibility with JAWS18

Shai
 

Hello Sieghard,
Thank you for your suggestion. I already read this article which
served as a catalyst for me to look into this option in the first
place. Through this list, I was hoping to hear from others who use
this device daily to comment on how accessible it is.

On 6/11/17, Sieghard Weitzel <sieghard@live.ca> wrote:
If you consider a Synology Diskstation I suggest you go to www.mosen.org and
check out Jonathan's article, he has one and says that Synology has made the
UI completely accessible with Jaws and he loves it.

Regards,
Sieghard

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shai
Sent: Sunday, June 11, 2017 12:14 PM
To: main@jfw.groups.io
Subject: redundant backup options accessibility with JAWS18

Hello,
I am looking for a redundant backup option either hard drive NAS or
cloud-based that is accessible with JAWS18 and works with Windows10.
What are people's recommendations? Such a service should not take up space
on the computer for backup. I have tried Crashplan and Carbonite but I found
that I am only able to initiate the backup but not restore files. I have
also tried the Synology demo and it seems accessible, but I would want to
hear people's experiences to confirm this.
Thank you in advance for any responses







Re: redundant backup options accessibility with JAWS18

Shai
 

Hello Jonas,
I am confused by your question. I went to the site and pressed enter
on the link that states dsm live demo. Further down the site they have
an item on their page which states try it now for free! I pressed
enter on this and then after about a second or so, the demo opened
automatically.
Hope that helps

On 6/12/17, Jonas Voll <jonas.voll@envisionus.com> wrote:
Hey, Shai !
How did you get the Synology demo Working?

Jonas Voll
Support Technician I
Envision, Inc.
2301 S Water ST
Wichita, KS 67213
O: 316-425-7141
F: 316-267-4312
www.envisionus.com

Envision: To improve the quality of life and provide inspiration for the
blind and visually impaired through employment, outreach, rehabilitation,
education and research.

-----Original Message-----
From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Shai
Sent: Sunday, June 11, 2017 2:14 PM
To: main@jfw.groups.io
Subject: redundant backup options accessibility with JAWS18

Hello,
I am looking for a redundant backup option either hard drive NAS or
cloud-based that is accessible with JAWS18 and works with Windows10.
What are people's recommendations? Such a service should not take up space
on the computer for backup. I have tried Crashplan and Carbonite but I found
that I am only able to initiate the backup but not restore files. I have
also tried the Synology demo and it seems accessible, but I would want to
hear people's experiences to confirm this.
Thank you in advance for any responses




SonicWall identified this message as clean.
To manage your junk mail go to https://nospam.envisionus.com and logon with
your domain userid and password.
If you consider this email to be spam please forward it to
'spam@nospam.envisionus.com'
NOTICE: This electronic mail message and any attached files are
confidential. The information is exclusively for the use of the individual
or entity intended as the recipient. If you are not the intended recipient,
any use, copying, printing, reviewing, retention, disclosure, distribution
or forwarding of the message or any attached file is not authorized and is
strictly prohibited. If you have received this electronic mail message in
error, please advise the sender by reply electronic mail immediately and
permanently delete the original transmission, any attachments and any copies
of this message from your computer system.




Re: Accessing the sheet code excel 2016

Pablo Morales
 

Yes, it is what I want to do. How can I access  the event code in an excel sheet?

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Paul Hunt
Sent: Monday, June 12, 2017 5:34 AM
To: main@jfw.groups.io
Subject: Re: Accessing the sheet code excel 2016

 

Hello Pablo. I don't have an answer for you yet. It's very early here and my son-in-law is sleeping in my computer room. Are you trying to access the Visual Basic editor where you can add event code to a Worksheet Event module? If not, what are you trying to edit?

Paul 


On Jun 12, 2017, at 3:58 AM, Pablo Morales <pablocmd2014@...> wrote:

Hi group.

I  am looking the way to open the excel sheet code of an excel file. I am not talking about the Microsoft visual basic for applications editor, I am talking about the sheet code editor. Normally mouse users make a right mouse button on the sheet tab, and on the context menu appears sheet code. But jaws users can’t do that, and  I haven’t found the way to access to the sheet code. Anybody knows a way to get there>

Thanks in advance,

 


Re: Accessing the sheet code excel 2016

Pablo Morales
 

Yes, it is exactly what I want to do. You are opening the vb code source for that sheet. The Macro editor opens the code that you can create for macros, but not for the sheet code.

 

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Steve Griffiths
Sent: Monday, June 12, 2017 7:56 AM
To: main@jfw.groups.io
Subject: Re: Accessing the sheet code excel 2016

 

 

Hi Pablo,

 

When I right click a sheet tab, the only option I get that includes the word code is "View Code", but this just takes me into the VBA editor. The name of the document that's open in each case is "Sheet N code" where N is the number of the sheet.

 

Steve

 

From: main@jfw.groups.io [mailto:main@jfw.groups.io] On Behalf Of Pablo Morales
Sent: 12 June 2017 09:58
To: main@jfw.groups.io
Subject: Accessing the sheet code excel 2016

 

Hi group.

I  am looking the way to open the excel sheet code of an excel file. I am not talking about the Microsoft visual basic for applications editor, I am talking about the sheet code editor. Normally mouse users make a right mouse button on the sheet tab, and on the context menu appears sheet code. But jaws users can’t do that, and  I haven’t found the way to access to the sheet code. Anybody knows a way to get there>

Thanks in advance,

 





The Guide Dogs for the Blind Association
Registered Office: Hillfields, Burghfield Common, Reading, Berkshire, RG7 3YG. A company limited by
guarantee registered in England and Wales (291646) and a charity registered in England and Wales
(209617) and Scotland (SC038979).

Tel: 0118 9835555
Website: www.guidedogs.org.uk
Email: guidedogs@...