Date   

moderated Re: Outlook Question

 

I know of the "Memo style" when printing an email, but I was under the impression the discussion was about how emails are displayed. A misunderstanding on my part.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ken Chernack via groups.io
Sent: Sunday, September 13, 2020 11:11 AM
To: main@jfw.groups.io
Subject: Re: Outlook Question

 

I find the choice between table vs. memo when printing the Outlook email.

It is about 5 or 6 tabs after the ctl/p command.

 

Ken

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, September 13, 2020 1:07 PM
To: main@jfw.groups.io
Subject: Re: Outlook Question

 

Where do you find this "table" and "memo" view?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ken Chernack via groups.io
Sent: Saturday, September 12, 2020 5:32 AM
To: main@jfw.groups.io
Subject: Re: Outlook Question

 

I have found that ‘memo’ view works better for Outlook emails.

Onward,

Ken

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pastor Gil Pries
Sent: Friday, September 11, 2020 9:49 PM
To: main@jfw.groups.io
Subject: Outlook Question

 

Hi Listers,

I am using Office 365 with Outlook for my email client.

It is set to table view.  Which is the best view to set Outlook?

Thanks,

 

Pastor Gil


moderated Re: Outlook Question

Adrian Spratt
 

Another way to handle tables in Outlook is to prevent it from handling them as tables. In the following instructions posted by Mike B, I don’t recall if medium” applies to all users or just those who have made that setting. You may need to substitute your setting on line 6:

 

1. Open the Settings Center while in Outlook.

2. Down arrow or first-letter navigate to, Web / HTML / PDFs. Pres enter.

3. Down arrow again or first-letter navigate to, Web / HTML / PDFs closed, right arrow to open.

4. Down arrow or first-letter navigate to, Reading, right arrow to open.

5. Down arrow or first-letter navigate to, Configure Web Verbosity Levels closed, right arrow to open.

6. Down arrow or first-letter navigate to, Medium..., spacebar to open. Don't press enter.

7. Down arrow many times or first-letter navigate to, Table grid checked, and uncheck it.

8. Tab to Okay. Tab to apply. Tab to Okay again.

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ken Chernack via groups.io
Sent: Sunday, September 13, 2020 2:11 PM
To: main@jfw.groups.io
Subject: Re: Outlook Question

 

I find the choice between table vs. memo when printing the Outlook email.

It is about 5 or 6 tabs after the ctl/p command.

 

Ken

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, September 13, 2020 1:07 PM
To: main@jfw.groups.io
Subject: Re: Outlook Question

 

Where do you find this "table" and "memo" view?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ken Chernack via groups.io
Sent: Saturday, September 12, 2020 5:32 AM
To: main@jfw.groups.io
Subject: Re: Outlook Question

 

I have found that ‘memo’ view works better for Outlook emails.

Onward,

Ken

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pastor Gil Pries
Sent: Friday, September 11, 2020 9:49 PM
To: main@jfw.groups.io
Subject: Outlook Question

 

Hi Listers,

I am using Office 365 with Outlook for my email client.

It is set to table view.  Which is the best view to set Outlook?

Thanks,

 

Pastor Gil


moderated Re: Outlook Question

Ken Chernack
 

I find the choice between table vs. memo when printing the Outlook email.

It is about 5 or 6 tabs after the ctl/p command.

 

Ken

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Sieghard Weitzel
Sent: Sunday, September 13, 2020 1:07 PM
To: main@jfw.groups.io
Subject: Re: Outlook Question

 

Where do you find this "table" and "memo" view?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ken Chernack via groups.io
Sent: Saturday, September 12, 2020 5:32 AM
To: main@jfw.groups.io
Subject: Re: Outlook Question

 

I have found that ‘memo’ view works better for Outlook emails.

Onward,

Ken

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pastor Gil Pries
Sent: Friday, September 11, 2020 9:49 PM
To: main@jfw.groups.io
Subject: Outlook Question

 

Hi Listers,

I am using Office 365 with Outlook for my email client.

It is set to table view.  Which is the best view to set Outlook?

Thanks,

 

Pastor Gil


moderated Re: Outlook Question

 

Where do you find this "table" and "memo" view?

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Ken Chernack via groups.io
Sent: Saturday, September 12, 2020 5:32 AM
To: main@jfw.groups.io
Subject: Re: Outlook Question

 

I have found that ‘memo’ view works better for Outlook emails.

Onward,

Ken

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Pastor Gil Pries
Sent: Friday, September 11, 2020 9:49 PM
To: main@jfw.groups.io
Subject: Outlook Question

 

Hi Listers,

I am using Office 365 with Outlook for my email client.

It is set to table view.  Which is the best view to set Outlook?

Thanks,

 

Pastor Gil


moderated Re: Zoom and sharing computer sound

Richard Turner
 

I have not done this, but it seems that if Jaws is coming over the headphones and the computer sounds are on the speakers, the alt+s and share computer sound should work without Jaws then going to everyone.




Richard
"He that cannot forgive others breaks the bridge over which he must pass himself," and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I've never once regretted extending it.)" - Edward Herbert

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Orlando Enrique Fiol via groups.io
Sent: Sunday, September 13, 2020 8:09 AM
To: main@jfw.groups.io
Subject: Re: Zoom and sharing computer sound

Hi, Shai.

>I am trying to share computer sound in Zoom so that I can play some >audio to meeting attendees.
>I have a USB headset/microphone and I was told that the way to >accomplish the task at hand is to change the sound card in JAWS to the >headset and change the sound in the Zoom audio settings to speakers >but even when I did this, from the audio settings menu in the Zoom >meeting I had, the JAWS sound still came through.

You might try using the Windows sound mixer app and making sure that JAWS is routed to your headset output. Just search the start menu for "mixer" and you'll find it. Alternately, you can type "sounds" and press enter on Sounds, System Settings. From there, tab to App Volume and Device Preferences. That will bring you to the exact same dialogue as the Sound Mixer options. Six of one, half a dozen of the other.

>I also tried changing to the internal system microphone in audio >settings, but this still did not resolve the issue.

First of all, if you're sharing audio, you're using the speakers rather than the microphone. Zoom doesn't really clarify this, but when you share audio, you're streaming content that each participant hears on their chosen audio device.
JAWS can't be routed to a microphone input, unless you have an inexplicable situation like I do with my Blue Yeti stereo USB microphone. Because it has a headphone output for monitoring the mic's sound right from the mic itself, the mic appears as both a microphone and speaker. This wouldn't be so bad if Windows didn't insist on using this phantom speaker as an audio device. Of course, since nothing is connecting this headphone output to any speaker, it's silent.


>How do I go about ensuring that JAWS sound is not heard when I go to >share computer sound?
>I know that I can also turn off JAWS speech, but I would rather try >to find a solution that does not have me doing this step.


Orlando Enrique Fiol
Ph.D. in Music theory
University of Pennsylvania: November, 2018 Professional Pianist/Keyboardist, Percussionist and Pedagogue Charlotte, North Carolina
Home: (980) 585-1516
Mobile: (267) 971-7090


moderated Re: Zoom and sharing computer sound

Orlando Enrique Fiol
 

Hi, Shai.

I am trying to share computer sound in Zoom so that I can play some
audio to meeting attendees.
I have a USB headset/microphone and I was told that the way to
accomplish the task at hand is to change the sound card in JAWS to the
headset and change the sound in the Zoom audio settings to speakers
but even when I did this, from the audio settings menu in the Zoom
meeting I had, the JAWS sound still came through.
You might try using the Windows sound mixer app and making sure that JAWS is routed to your headset output. Just search the start menu for "mixer" and you'll find it. Alternately, you can type "sounds" and press enter on Sounds, System Settings. From there, tab to App Volume and Device Preferences. That will bring you to the exact same dialogue as the Sound Mixer options. Six of one, half a dozen of the other.

I also tried changing to the internal system microphone in audio
settings, but this still did not resolve the issue.
First of all, if you're sharing audio, you're using the speakers rather than the microphone. Zoom doesn't really clarify this, but when you share audio, you're streaming content that each participant hears on their chosen audio device.
JAWS can't be routed to a microphone input, unless you have an inexplicable situation like I do with my Blue Yeti stereo USB microphone. Because it has a headphone output for monitoring the mic's sound right from the mic itself, the mic appears as both a microphone and speaker. This wouldn't be so bad if Windows didn't insist on using this phantom speaker as an audio device. Of course, since nothing is connecting this headphone output to any speaker, it's silent.


How do I go about ensuring that JAWS sound is not heard when I go to
share computer sound?
I know that I can also turn off JAWS speech, but I would rather try
to find a solution that does not have me doing this step.

Orlando Enrique Fiol
Ph.D. in Music theory
University of Pennsylvania: November, 2018
Professional Pianist/Keyboardist, Percussionist and Pedagogue
Charlotte, North Carolina
Home: (980) 585-1516
Mobile: (267) 971-7090


moderated Re: Zoom and sharing computer sound

David Ingram
 

What version of zoom are these keystroke commands?

-----Original Message-----
From: Shai <shaiwol@gmail.com>
Sent: Sep 13, 2020 12:45 AM
To: main@jfw.groups.io
Subject: Re: Zoom and sharing computer sound

Hello Afik,
Thank you for your reply. If the devices were the same in JAWS and
Zoom, then the sound of JAWS would be emitted on the other person's
computer if I shared computer sound.
I am trying not to have JAWS heard on the other side and just the
audio of the music or occasionally video from Youtube that I would be
playing.



On 9/12/20, Afik Souffir <afik.souffir@outlook.com> wrote:

No! the devices have to be the same in jaws and zoom.
Just press alt s, then tab to share computer sound. Check this checkbox and
press enter. You're done.


Afik


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shai
Sent: Sunday, September 13, 2020 8:20 AM
To: main@jfw.groups.io
Subject: Zoom and sharing computer sound

Hello,
I am trying to share computer sound in Zoom so that I can play some audio to
meeting attendees.
I have a USB headset/microphone and I was told that the way to accomplish
the task at hand is to change the sound card in JAWS to the headset and
change the sound in the Zoom audio settings to speakers but even when I did
this, from the audio settings menu in the Zoom meeting I had, the JAWS sound
still came through.
I also tried changing to the internal system microphone in audio settings,
but this still did not resolve the issue.
How do I go about ensuring that JAWS sound is not heard when I go to share
computer sound?
I know that I can also turn off JAWS speech, but I would rather try to find
a solution that does not have me doing this step.
Thank you in advance for any responses.








moderated Re: Zoom and sharing computer sound

Shai
 

Hello Afik,
Thank you for your reply. If the devices were the same in JAWS and
Zoom, then the sound of JAWS would be emitted on the other person's
computer if I shared computer sound.
I am trying not to have JAWS heard on the other side and just the
audio of the music or occasionally video from Youtube that I would be
playing.

On 9/12/20, Afik Souffir <afik.souffir@outlook.com> wrote:

No! the devices have to be the same in jaws and zoom.
Just press alt s, then tab to share computer sound. Check this checkbox and
press enter. You're done.


Afik


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shai
Sent: Sunday, September 13, 2020 8:20 AM
To: main@jfw.groups.io
Subject: Zoom and sharing computer sound

Hello,
I am trying to share computer sound in Zoom so that I can play some audio to
meeting attendees.
I have a USB headset/microphone and I was told that the way to accomplish
the task at hand is to change the sound card in JAWS to the headset and
change the sound in the Zoom audio settings to speakers but even when I did
this, from the audio settings menu in the Zoom meeting I had, the JAWS sound
still came through.
I also tried changing to the internal system microphone in audio settings,
but this still did not resolve the issue.
How do I go about ensuring that JAWS sound is not heard when I go to share
computer sound?
I know that I can also turn off JAWS speech, but I would rather try to find
a solution that does not have me doing this step.
Thank you in advance for any responses.







moderated Re: Zoom and sharing computer sound

tina sohl
 

Ok thanks.

On 9/12/20, Afik Souffir <afik.souffir@outlook.com> wrote:

No! the devices have to be the same in jaws and zoom.
Just press alt s, then tab to share computer sound. Check this checkbox and
press enter. You're done.


Afik


-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shai
Sent: Sunday, September 13, 2020 8:20 AM
To: main@jfw.groups.io
Subject: Zoom and sharing computer sound

Hello,
I am trying to share computer sound in Zoom so that I can play some audio to
meeting attendees.
I have a USB headset/microphone and I was told that the way to accomplish
the task at hand is to change the sound card in JAWS to the headset and
change the sound in the Zoom audio settings to speakers but even when I did
this, from the audio settings menu in the Zoom meeting I had, the JAWS sound
still came through.
I also tried changing to the internal system microphone in audio settings,
but this still did not resolve the issue.
How do I go about ensuring that JAWS sound is not heard when I go to share
computer sound?
I know that I can also turn off JAWS speech, but I would rather try to find
a solution that does not have me doing this step.
Thank you in advance for any responses.







moderated Re: Zoom and sharing computer sound

Afik Souffir <afik.souffir@...>
 

No! the devices have to be the same in jaws and zoom.
Just press alt s, then tab to share computer sound. Check this checkbox and press enter. You're done.


Afik

-----Original Message-----
From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Shai
Sent: Sunday, September 13, 2020 8:20 AM
To: main@jfw.groups.io
Subject: Zoom and sharing computer sound

Hello,
I am trying to share computer sound in Zoom so that I can play some audio to meeting attendees.
I have a USB headset/microphone and I was told that the way to accomplish the task at hand is to change the sound card in JAWS to the headset and change the sound in the Zoom audio settings to speakers but even when I did this, from the audio settings menu in the Zoom meeting I had, the JAWS sound still came through.
I also tried changing to the internal system microphone in audio settings, but this still did not resolve the issue.
How do I go about ensuring that JAWS sound is not heard when I go to share computer sound?
I know that I can also turn off JAWS speech, but I would rather try to find a solution that does not have me doing this step.
Thank you in advance for any responses.


moderated Zoom and sharing computer sound

Shai
 

Hello,
I am trying to share computer sound in Zoom so that I can play some
audio to meeting attendees.
I have a USB headset/microphone and I was told that the way to
accomplish the task at hand is to change the sound card in JAWS to the
headset and change the sound in the Zoom audio settings to speakers
but even when I did this, from the audio settings menu in the Zoom
meeting I had, the JAWS sound still came through.
I also tried changing to the internal system microphone in audio
settings, but this still did not resolve the issue.
How do I go about ensuring that JAWS sound is not heard when I go to
share computer sound?
I know that I can also turn off JAWS speech, but I would rather try
to find a solution that does not have me doing this step.
Thank you in advance for any responses.


moderated Re: Using grubhub

tina sohl
 

good to know about grubhub. I haven't tried it with jaws. The last time I tried it with a different screen reader on my laptop it didn't work out so well so we'll have to try it with jaws sometime. Sent for my Samsung Galaxy


On Sat, Sep 12, 2020, 6:09 PM Charles Krugman <ckrugman@...> wrote:

I use it all the time on the computer and have not encountered any difficulties. I don’t recall coming across the captcha feature you are referring to.

Chuck

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of kevin meyers
Sent: Saturday, September 12, 2020 5:38 PM
To: main@jfw.groups.io
Subject: Using grubhub

 

Hello, I’m using Jaws 202 and windows most recent versions. The browser is Chrome and I just installed it the other day. Has anyone used Grubhub? I’m having a problem turning on the I’m not a robot. I do press the space bar and it doesn’t tell me it is checked. I did start over and pressed that one time thinking I turned it on. I then had to listen to audio  and enter the words. I was able to do it. Yet I couldn’t get off that page. There was no error message saying something was wrong. I do have an account. I cleared out browser data and still the same problems. Any thoughts? Thanks, Kevin




AVG logo

This email has been checked for viruses by AVG antivirus software.
www.avg.com



moderated Re: Using grubhub

Charles Krugman
 

I use it all the time on the computer and have not encountered any difficulties. I don’t recall coming across the captcha feature you are referring to.

Chuck

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of kevin meyers
Sent: Saturday, September 12, 2020 5:38 PM
To: main@jfw.groups.io
Subject: Using grubhub

 

Hello, I’m using Jaws 202 and windows most recent versions. The browser is Chrome and I just installed it the other day. Has anyone used Grubhub? I’m having a problem turning on the I’m not a robot. I do press the space bar and it doesn’t tell me it is checked. I did start over and pressed that one time thinking I turned it on. I then had to listen to audio  and enter the words. I was able to do it. Yet I couldn’t get off that page. There was no error message saying something was wrong. I do have an account. I cleared out browser data and still the same problems. Any thoughts? Thanks, Kevin




AVG logo

This email has been checked for viruses by AVG antivirus software.
www.avg.com



moderated Re: Using grubhub

Andy
 

I tend to use the iPhone apps for these kinds of services.  in general I have found that the apps are much easier to use than the web sites.
 
Andy
 

----- Original Message -----
Sent: Saturday, September 12, 2020 5:37 PM
Subject: Using grubhub

Hello, I’m using Jaws 202 and windows most recent versions. The browser is Chrome and I just installed it the other day. Has anyone used Grubhub? I’m having a problem turning on the I’m not a robot. I do press the space bar and it doesn’t tell me it is checked. I did start over and pressed that one time thinking I turned it on. I then had to listen to audio  and enter the words. I was able to do it. Yet I couldn’t get off that page. There was no error message saying something was wrong. I do have an account. I cleared out browser data and still the same problems. Any thoughts? Thanks, Kevin


moderated Using grubhub

kevin meyers
 

Hello, I’m using Jaws 202 and windows most recent versions. The browser is Chrome and I just installed it the other day. Has anyone used Grubhub? I’m having a problem turning on the I’m not a robot. I do press the space bar and it doesn’t tell me it is checked. I did start over and pressed that one time thinking I turned it on. I then had to listen to audio  and enter the words. I was able to do it. Yet I couldn’t get off that page. There was no error message saying something was wrong. I do have an account. I cleared out browser data and still the same problems. Any thoughts? Thanks, Kevin


moderated Jaws extension to read math content

Leo
 

Hello everyone!

 

Someone shared in other list this info, and I thought it may be useful for some of you. In a nutshell, the following website in github  provides extensions for screen readers to read math content. Have a look at

https://github.com/tseykovets/nvmathviewer

 

 

--
Leo

“Pain is inevitable. Suffering is optional.”
― haruki murakami,


moderated Re: I have a stubborn Bluetooth speaker that doesn't cooperate with the JAWS feature to not cut off speech or let it start without cutting off the beginning of speech.

Cohn, Jonathan
 

This sounds like possibly a speaker setting if there are any. Early MP3 players used to behave like this to make it sound like you were listening to a radio station where the DJ fades in one song as the previous song is ending.
Something at least to research!
Jonathan Cohn


On Sep 11, 2020, at 23:35, Kevin Minor <kminor65@...> wrote:

Hi.

 

I have a Polaroid Bluetooth speaker that starts with a low volume when trying to listen to speech. I thought the new feature of JAWS would solve this problem, but it doesn’t.

 

Any ideas? It has decent sound, and the battery life is good. I’d like to take this speaker into my bedroom to listen to music to sleep with, and I guess it’s good enough for that, but I’d also like JAWS to work so I could check email if I want with my Bluetooth keyboard. Is there any hope for this, or am I stuck?

 

Thanks in advance.

Have a blessed day and don’t work too hard.

 

Kevin and Jilly



moderated Re: Isue with setting up an older braille display with JAWS and Pc.

Lino Morales
 

Well can't you just connect to PC?

On 9/12/2020 9:49 AM, Justin Mcdevitt wrote:

Hello group,

 

Earlier today, I initiated the process of setting up my apex with JAWS and Windows to use as a braille display with my home Pc.

Prior to this, I had wondered if given when the Apex came onto the market, that its compatibility with Windows10 might be an issue. It turns out that it is indeed a problem.

One of the Technical reps from Human ware suggested that I purchase a Bluetooth Dongle which might resolve the compatibility issue, though he was not certain of this. He also couldn't suggest a specific Dongal, as there are any number of types to choose from.

I understand that Apex technology is ageing out. However, at this point, I do not have $5K to purchase a Braillenote.

Has anyone here encountered this same issue with respect to the Apex, or other braille displays. Whether yes or no, any input is appreciated.

 

Best to all, Justin


moderated Re: I Cannot Install the new JAWS Beta

Richard Turner
 

Thank you Loy,

I noticed there are four options, 1. only from the Microsoft Store, 2.  anywhere, but warn me if tit is not from the Microsoft store, 3.  anywhere but let me know if there is a comparable app in the Microsoft store, and 4.  Anywhere.

 

That should help in the future.

 

 

Richard

"He that cannot forgive others breaks the bridge over which he must pass himself,” and we forget that only grace can break the cycle of ancient hatreds among peoples. (It is notable that while I have regretted not granting grace to others, I’ve never once regretted extending it.)" - Edward Herbert

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Loy
Sent: Saturday, September 12, 2020 11:35 AM
To: main@jfw.groups.io
Subject: Re: I Cannot Install the new JAWS Beta

 

Here is the steps to tell Windows to let you install non Windows Store apps  This will fix your problem.

1.    Click Start > Click Settings.

2.    In the Settings window, click Apps.

3.    In Apps & Features, change “Choose where to get apps” from The Microsoft Store only (recommended) to Anywhere.

4.    Close the Settings window. The change will only take effect when you close the window.

----- Original Message -----

From: Randy Meyer

Sent: Saturday, September 12, 2020 2:27 PM

Subject: Re: I Cannot Install the new JAWS Beta

 

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller
Sent: Friday, September 11, 2020 9:26 PM
To: jfw@groups.io
Subject: I Cannot Install the new JAWS Beta

 

Dear Listers:

 

I understand that  the new JAWS 2021 Beta version has just come out.  I am trying to install it.  I am using a Desktop computer, Windows 10 and the latest version of JAWS.  I have downloaded and saved the application for the new Beta version but when I go to the folder where it is and hit the Enter key after locating it, instead of giving me the option to install it I am getting a dialog that just says “get app from store.”  I know apps are only used with phones and I don’t know how to handle apps as I have only a cell phone, not an i-phone, so I don’t know how to rectify this problem and download the Beta version to my Desktop.

 

 

 

Rick Miller

 


moderated Re: I Cannot Install the new JAWS Beta

Loy
 

Here is the steps to tell Windows to let you install non Windows Store apps  This will fix your problem.
  1. Click Start > Click Settings.
  2. In the Settings window, click Apps.
  3. In Apps & Features, change “Choose where to get apps” from The Microsoft Store only (recommended) to Anywhere.
  4. Close the Settings window. The change will only take effect when you close the window.

----- Original Message -----
Sent: Saturday, September 12, 2020 2:27 PM
Subject: Re: I Cannot Install the new JAWS Beta

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Rick Miller
Sent: Friday, September 11, 2020 9:26 PM
To: jfw@groups.io
Subject: I Cannot Install the new JAWS Beta

 

Dear Listers:

 

I understand that  the new JAWS 2021 Beta version has just come out.  I am trying to install it.  I am using a Desktop computer, Windows 10 and the latest version of JAWS.  I have downloaded and saved the application for the new Beta version but when I go to the folder where it is and hit the Enter key after locating it, instead of giving me the option to install it I am getting a dialog that just says “get app from store.”  I know apps are only used with phones and I don’t know how to handle apps as I have only a cell phone, not an i-phone, so I don’t know how to rectify this problem and download the Beta version to my Desktop.

 

 

 

Rick Miller

 

3981 - 4000 of 85856